ncr5380: Cleanup comments

The CVS revision log is not nearly as useful as the history/history.git
repo, so remove it. Roman's commentary at the top of his driver repeats
the same information elsewhere in the file so remove it. Also remove
some other redundant or obsolete comments.

Both the driver and the datasheets confusingly refer to a DMA access
for a SCSI WRITE command as a "DMA write". Similarly a SCSI READ command
is called a "DMA read". This is the opposite of the usual convention.
Thankfully, the chip documentation and driver code also use "DMA send" and
"DMA receive", so adopt this terminology.

This removes some unimportant discrepancies between the two core driver
forks so that 'diff' can be used to reveal the important ones, to
facilitate reunification.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/atari_NCR5380.c

@@ -24,47 +24,7 @@
  * 1+ (800) 334-5454
  */
 
-/*
- * ++roman: To port the 5380 driver to the Atari, I had to do some changes in
- * this file, too:
- *
- *  - Some of the debug statements were incorrect (undefined variables and the
- *    like). I fixed that.
- *
- *  - In information_transfer(), I think a #ifdef was wrong. Looking at the
- *    possible DMA transfer size should also happen for REAL_DMA. I added this
- *    in the #if statement.
- *
- *  - When using real DMA, information_transfer() should return in a DATAOUT
- *    phase after starting the DMA. It has nothing more to do.
- *
- *  - The interrupt service routine should run main after end of DMA, too (not
- *    only after RESELECTION interrupts). Additionally, it should _not_ test
- *    for more interrupts after running main, since a DMA process may have
- *    been started and interrupts are turned on now. The new int could happen
- *    inside the execution of NCR5380_intr(), leading to recursive
- *    calls.
- *
- *  - I've added a function merge_contiguous_buffers() that tries to
- *    merge scatter-gather buffers that are located at contiguous
- *    physical addresses and can be processed with the same DMA setup.
- *    Since most scatter-gather operations work on a page (4K) of
- *    4 buffers (1K), in more than 90% of all cases three interrupts and
- *    DMA setup actions are saved.
- *
- * - I've deleted all the stuff for AUTOPROBE_IRQ, REAL_DMA_POLL, PSEUDO_DMA
- *    and USLEEP, because these were messing up readability and will never be
- *    needed for Atari SCSI.
- *
- * - I've revised the NCR5380_main() calling scheme (relax the 'main_running'
- *   stuff), and 'main' is executed in a bottom half if awoken by an
- *   interrupt.
- *
- * - The code was quite cluttered up by "#if (NDEBUG & NDEBUG_*) printk..."
- *   constructs. In my eyes, this made the source rather unreadable, so I
- *   finally replaced that by the *_PRINTK() macros.
- *
- */
+/* Ported to Atari by Roman Hodek and others. */
 
 /* Adapted for the sun3 by Sam Creasey. */
 
@@ -344,17 +304,15 @@ static void free_all_tags(struct NCR5380_hostdata *hostdata)
 
 #endif /* SUPPORT_TAGS */
 
-
-/*
- * Function: void merge_contiguous_buffers( struct scsi_cmnd *cmd )
- *
- * Purpose: Try to merge several scatter-gather requests into one DMA
- *    transfer. This is possible if the scatter buffers lie on
- *    physical contiguous addresses.
+/**
+ * merge_contiguous_buffers - coalesce scatter-gather list entries
+ * @cmd: command requesting IO
  *
- * Parameters: struct scsi_cmnd *cmd
- *    The command to work on. The first scatter buffer's data are
- *    assumed to be already transferred into ptr/this_residual.
+ * Try to merge several scatter-gather buffers into one DMA transfer.
+ * This is possible if the scatter buffers lie on physically
+ * contiguous addresses. The first scatter-gather buffer's data are
+ * assumed to be already transferred into cmd->SCp.this_residual.
+ * Every buffer merged avoids an interrupt and a DMA setup operation.
  */
 
 static void merge_contiguous_buffers(struct scsi_cmnd *cmd)
@@ -406,9 +364,7 @@ static inline void initialize_SCp(struct scsi_cmnd *cmd)
 		cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1;
 		cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
 		cmd->SCp.this_residual = cmd->SCp.buffer->length;
-		/* ++roman: Try to merge some scatter-buffers if they are at
-		 * contiguous physical addresses.
-		 */
+
 		merge_contiguous_buffers(cmd);
 	} else {
 		cmd->SCp.buffer = NULL;
@@ -556,8 +512,6 @@ static struct {
  * @instance: adapter to dump
  *
  * Print the current SCSI phase for debugging purposes
- *
- * Locks: none
  */
 
 static void NCR5380_print_phase(struct Scsi_Host *instance)
@@ -583,8 +537,6 @@ static void NCR5380_print_phase(struct Scsi_Host *instance)
  * @instance: relevant scsi host instance
  *
  * For use as the host template info() handler.
- *
- * Locks: none
  */
 
 static const char *NCR5380_info(struct Scsi_Host *instance)
@@ -829,20 +781,6 @@ static int NCR5380_queue_command(struct Scsi_Host *instance,
 	cmd->result = 0;
 
 	/*
-	 * Insert the cmd into the issue queue. Note that REQUEST SENSE
-	 * commands are added to the head of the queue since any command will
-	 * clear the contingent allegiance condition that exists and the
-	 * sense data is only guaranteed to be valid while the condition exists.
-	 */
-
-	/* ++guenther: now that the issue queue is being set up, we can lock ST-DMA.
-	 * Otherwise a running NCR5380_main may steal the lock.
-	 * Lock before actually inserting due to fairness reasons explained in
-	 * atari_scsi.c. If we insert first, then it's impossible for this driver
-	 * to release the lock.
-	 * Stop timer for this command while waiting for the lock, or timeouts
-	 * may happen (and they really do), and it's no good if the command doesn't
-	 * appear in any of the queues.
 	 * ++roman: Just disabling the NCR interrupt isn't sufficient here,
 	 * because also a timer int can trigger an abort or reset, which would
 	 * alter queues and touch the lock.
@@ -958,8 +896,6 @@ static void requeue_cmd(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
  * be done on the NCR5380 host adapters in a system.  Both
  * NCR5380_queue_command() and NCR5380_intr() will try to start it
  * in case it is not running.
- *
- * Locks: called as its own thread with no locks held.
  */
 
 static void NCR5380_main(struct work_struct *work)
@@ -1041,7 +977,6 @@ static void NCR5380_main(struct work_struct *work)
  *	mismatch occurs (which would finish the DMA transfer).
  *
  * Inputs : instance - this instance of the NCR5380.
- *
  */
 
 static void NCR5380_dma_complete(struct Scsi_Host *instance)
@@ -1766,7 +1701,6 @@ static int do_abort(struct Scsi_Host *instance)
  *	is in same phase.
  *
  *	Also, *phase, *count, *data are modified in place.
- *
  */
 
 
@@ -1968,9 +1902,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 					--cmd->SCp.buffers_residual;
 					cmd->SCp.this_residual = cmd->SCp.buffer->length;
 					cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
-					/* ++roman: Try to merge some scatter-buffers if
-					 * they are at contiguous physical addresses.
-					 */
 					merge_contiguous_buffers(cmd);
 					dsprintk(NDEBUG_INFORMATION, instance, "%d bytes and %d buffers left\n",
 					         cmd->SCp.this_residual,
@@ -2007,7 +1938,8 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 						/*
 						 * If the watchdog timer fires, all future
 						 * accesses to this device will use the
-						 * polled-IO. */
+						 * polled-IO.
+						 */
 						scmd_printk(KERN_INFO, cmd,
 							"switching to slow handshake\n");
 						cmd->device->borken = 1;
@@ -2099,10 +2031,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 					/* Enable reselect interrupts */
 					NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
 
-					/* ++roman: For Falcon SCSI, release the lock on the
-					 * ST-DMA here if no other commands are waiting on the
-					 * disconnected queue.
-					 */
 					maybe_release_dma_irq(instance);
 					return;
 				case MESSAGE_REJECT:
@@ -2164,15 +2092,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 					break;
 				case EXTENDED_MESSAGE:
 					/*
-					 * Extended messages are sent in the following format :
-					 * Byte
-					 * 0		EXTENDED_MESSAGE == 1
-					 * 1		length (includes one byte for code, doesn't
-					 *		include first two bytes)
-					 * 2		code
-					 * 3..length+1	arguments
-					 *
-					 * Start the extended message buffer with the EXTENDED_MESSAGE
+					 * Start the message buffer with the EXTENDED_MESSAGE
 					 * byte, since spi_print_msg() wants the whole thing.
 					 */
 					extended_msg[0] = EXTENDED_MESSAGE;
@@ -2299,7 +2219,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
  *	nexus has been reestablished,
  *
  * Inputs : instance - this instance of the NCR5380.
- *
  */