Merge branch 'be2net-next'

Venkat Duvvuru says:

====================
be2net: patch-set

The following patch set has one new feature addition and two fixes.

Patch 1 adds support for hwmon sysfs interface to display board temperature.
Board temperature display through ethtool statistics is removed.

Patch 2 reports "link down" in a few more error cases which are not handled
currently.

Patch 3 adds support for os2bmc. OS2BMC feature will allow the server to
communicate with the on-board BMC/idrac (Baseboard Management Controller)
over the LOM via standard Ethernet. More details are added in the commit log.

Please review.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/emulex/benet/be.h

@@ -31,6 +31,8 @@
 #include <linux/slab.h>
 #include <linux/u64_stats_sync.h>
 #include <linux/cpumask.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
 
 #include "be_hw.h"
 #include "be_roce.h"
@@ -314,7 +316,6 @@ struct be_rx_obj {
 } ____cacheline_aligned_in_smp;
 
 struct be_drv_stats {
-	u32 be_on_die_temperature;
 	u32 eth_red_drops;
 	u32 dma_map_errors;
 	u32 rx_drops_no_pbuf;
@@ -383,6 +384,7 @@ enum vf_state {
 #define BE_FLAGS_SETUP_DONE			BIT(9)
 #define BE_FLAGS_EVT_INCOMPATIBLE_SFP		BIT(10)
 #define BE_FLAGS_ERR_DETECTION_SCHEDULED	BIT(11)
+#define BE_FLAGS_OS2BMC				BIT(12)
 
 #define BE_UC_PMAC_COUNT			30
 #define BE_VF_UC_PMAC_COUNT			2
@@ -427,6 +429,8 @@ struct be_resources {
 	u32 vf_if_cap_flags;	/* VF if capability flags */
 };
 
+#define be_is_os2bmc_enabled(adapter) (adapter->flags & BE_FLAGS_OS2BMC)
+
 struct rss_info {
 	u64 rss_flags;
 	u8 rsstable[RSS_INDIR_TABLE_LEN];
@@ -434,6 +438,12 @@ struct rss_info {
 	u8 rss_hkey[RSS_HASH_KEY_LEN];
 };
 
+#define BE_INVALID_DIE_TEMP	0xFF
+struct be_hwmon {
+	struct device *hwmon_dev;
+	u8 be_on_die_temp;  /* Unit: millidegree Celsius */
+};
+
 /* Macros to read/write the 'features' word of be_wrb_params structure.
  */
 #define	BE_WRB_F_BIT(name)			BE_WRB_F_##name##_BIT
@@ -454,7 +464,8 @@ enum {
 	BE_WRB_F_LSO_BIT,		/* LSO */
 	BE_WRB_F_LSO6_BIT,		/* LSO6 */
 	BE_WRB_F_VLAN_BIT,		/* VLAN */
-	BE_WRB_F_VLAN_SKIP_HW_BIT	/* Skip VLAN tag (workaround) */
+	BE_WRB_F_VLAN_SKIP_HW_BIT,	/* Skip VLAN tag (workaround) */
+	BE_WRB_F_OS2BMC_BIT		/* Send packet to the management ring */
 };
 
 /* The structure below provides a HW-agnostic abstraction of WRB params
@@ -515,6 +526,7 @@ struct be_adapter {
 	u16 work_counter;
 
 	struct delayed_work be_err_detection_work;
+	u8 err_flags;
 	u32 flags;
 	u32 cmd_privileges;
 	/* Ethtool knobs and info */
@@ -573,8 +585,11 @@ struct be_adapter {
 	u16 qnq_vid;
 	u32 msg_enable;
 	int be_get_temp_freq;
+	struct be_hwmon hwmon_info;
 	u8 pf_number;
 	struct rss_info rss_info;
+	/* Filters for packets that need to be sent to BMC */
+	u32 bmc_filt_mask;
 };
 
 #define be_physfn(adapter)		(!adapter->virtfn)
@@ -773,26 +788,36 @@ static inline bool is_ipv4_pkt(struct sk_buff *skb)
 	return skb->protocol == htons(ETH_P_IP) && ip_hdr(skb)->version == 4;
 }
 
-static inline bool be_multi_rxq(const struct be_adapter *adapter)
+#define BE_ERROR_EEH		1
+#define BE_ERROR_UE		BIT(1)
+#define BE_ERROR_FW		BIT(2)
+#define BE_ERROR_HW		(BE_ERROR_EEH | BE_ERROR_UE)
+#define BE_ERROR_ANY		(BE_ERROR_EEH | BE_ERROR_UE | BE_ERROR_FW)
+#define BE_CLEAR_ALL		0xFF
+
+static inline u8 be_check_error(struct be_adapter *adapter, u32 err_type)
 {
-	return adapter->num_rx_qs > 1;
+	return (adapter->err_flags & err_type);
 }
 
-static inline bool be_error(struct be_adapter *adapter)
+static inline void be_set_error(struct be_adapter *adapter, int err_type)
 {
-	return adapter->eeh_error || adapter->hw_error || adapter->fw_timeout;
+	struct net_device *netdev = adapter->netdev;
+
+	adapter->err_flags |= err_type;
+	netif_carrier_off(netdev);
+
+	dev_info(&adapter->pdev->dev, "%s: Link down\n", netdev->name);
 }
 
-static inline bool be_hw_error(struct be_adapter *adapter)
+static inline void  be_clear_error(struct be_adapter *adapter, int err_type)
 {
-	return adapter->eeh_error || adapter->hw_error;
+	adapter->err_flags &= ~err_type;
 }
 
-static inline void  be_clear_all_error(struct be_adapter *adapter)
+static inline bool be_multi_rxq(const struct be_adapter *adapter)
 {
-	adapter->eeh_error = false;
-	adapter->hw_error = false;
-	adapter->fw_timeout = false;
+	return adapter->num_rx_qs > 1;
 }
 
 void be_cq_notify(struct be_adapter *adapter, u16 qid, bool arm,

drivers/net/ethernet/emulex/benet/be_cmds.c

@@ -93,7 +93,7 @@ static void be_mcc_notify(struct be_adapter *adapter)
 	struct be_queue_info *mccq = &adapter->mcc_obj.q;
 	u32 val = 0;
 
-	if (be_error(adapter))
+	if (be_check_error(adapter, BE_ERROR_ANY))
 		return;
 
 	val |= mccq->id & DB_MCCQ_RING_ID_MASK;
@@ -192,10 +192,12 @@ static void be_async_cmd_process(struct be_adapter *adapter,
 		if (base_status == MCC_STATUS_SUCCESS) {
 			struct be_cmd_resp_get_cntl_addnl_attribs *resp =
 							(void *)resp_hdr;
-			adapter->drv_stats.be_on_die_temperature =
+			adapter->hwmon_info.be_on_die_temp =
 						resp->on_die_temperature;
 		} else {
 			adapter->be_get_temp_freq = 0;
+			adapter->hwmon_info.be_on_die_temp =
+						BE_INVALID_DIE_TEMP;
 		}
 		return;
 	}
@@ -331,6 +333,21 @@ static void be_async_grp5_pvid_state_process(struct be_adapter *adapter,
 	}
 }
 
+#define MGMT_ENABLE_MASK	0x4
+static void be_async_grp5_fw_control_process(struct be_adapter *adapter,
+					     struct be_mcc_compl *compl)
+{
+	struct be_async_fw_control *evt = (struct be_async_fw_control *)compl;
+	u32 evt_dw1 = le32_to_cpu(evt->event_data_word1);
+
+	if (evt_dw1 & MGMT_ENABLE_MASK) {
+		adapter->flags |= BE_FLAGS_OS2BMC;
+		adapter->bmc_filt_mask = le32_to_cpu(evt->event_data_word2);
+	} else {
+		adapter->flags &= ~BE_FLAGS_OS2BMC;
+	}
+}
+
 static void be_async_grp5_evt_process(struct be_adapter *adapter,
 				      struct be_mcc_compl *compl)
 {
@@ -347,6 +364,10 @@ static void be_async_grp5_evt_process(struct be_adapter *adapter,
 	case ASYNC_EVENT_PVID_STATE:
 		be_async_grp5_pvid_state_process(adapter, compl);
 		break;
+	/* Async event to disable/enable os2bmc and/or mac-learning */
+	case ASYNC_EVENT_FW_CONTROL:
+		be_async_grp5_fw_control_process(adapter, compl);
+		break;
 	default:
 		break;
 	}
@@ -487,7 +508,7 @@ static int be_mcc_wait_compl(struct be_adapter *adapter)
 	struct be_mcc_obj *mcc_obj = &adapter->mcc_obj;
 
 	for (i = 0; i < mcc_timeout; i++) {
-		if (be_error(adapter))
+		if (be_check_error(adapter, BE_ERROR_ANY))
 			return -EIO;
 
 		local_bh_disable();
@@ -500,7 +521,7 @@ static int be_mcc_wait_compl(struct be_adapter *adapter)
 	}
 	if (i == mcc_timeout) {
 		dev_err(&adapter->pdev->dev, "FW not responding\n");
-		adapter->fw_timeout = true;
+		be_set_error(adapter, BE_ERROR_FW);
 		return -EIO;
 	}
 	return status;
@@ -539,7 +560,7 @@ static int be_mbox_db_ready_wait(struct be_adapter *adapter, void __iomem *db)
 	u32 ready;
 
 	do {
-		if (be_error(adapter))
+		if (be_check_error(adapter, BE_ERROR_ANY))
 			return -EIO;
 
 		ready = ioread32(db);
@@ -552,7 +573,7 @@ static int be_mbox_db_ready_wait(struct be_adapter *adapter, void __iomem *db)
 
 		if (msecs > 4000) {
 			dev_err(&adapter->pdev->dev, "FW not responding\n");
-			adapter->fw_timeout = true;
+			be_set_error(adapter, BE_ERROR_FW);
 			be_detect_error(adapter);
 			return -1;
 		}

drivers/net/ethernet/emulex/benet/be_cmds.h

@@ -105,6 +105,7 @@ struct be_mcc_compl {
 #define ASYNC_DEBUG_EVENT_TYPE_QNQ	1
 #define ASYNC_EVENT_CODE_SLIPORT	0x11
 #define ASYNC_EVENT_PORT_MISCONFIG	0x9
+#define ASYNC_EVENT_FW_CONTROL		0x5
 
 enum {
 	LINK_DOWN	= 0x0,
@@ -181,6 +182,22 @@ struct be_async_event_misconfig_port {
 	u32 flags;
 } __packed;
 
+#define BMC_FILT_BROADCAST_ARP				BIT(0)
+#define BMC_FILT_BROADCAST_DHCP_CLIENT			BIT(1)
+#define BMC_FILT_BROADCAST_DHCP_SERVER			BIT(2)
+#define BMC_FILT_BROADCAST_NET_BIOS			BIT(3)
+#define BMC_FILT_BROADCAST				BIT(7)
+#define BMC_FILT_MULTICAST_IPV6_NEIGH_ADVER		BIT(8)
+#define BMC_FILT_MULTICAST_IPV6_RA			BIT(9)
+#define BMC_FILT_MULTICAST_IPV6_RAS			BIT(10)
+#define BMC_FILT_MULTICAST				BIT(15)
+struct be_async_fw_control {
+	u32 event_data_word1;
+	u32 event_data_word2;
+	u32 evt_tag;
+	u32 event_data_word4;
+} __packed;
+
 struct be_mcc_mailbox {
 	struct be_mcc_wrb wrb;
 	struct be_mcc_compl compl;

drivers/net/ethernet/emulex/benet/be_ethtool.c

@@ -123,7 +123,6 @@ static const struct be_ethtool_stat et_stats[] = {
 	{DRVSTAT_INFO(dma_map_errors)},
 	/* Number of packets dropped due to random early drop function */
 	{DRVSTAT_INFO(eth_red_drops)},
-	{DRVSTAT_INFO(be_on_die_temperature)},
 	{DRVSTAT_INFO(rx_roce_bytes_lsd)},
 	{DRVSTAT_INFO(rx_roce_bytes_msd)},
 	{DRVSTAT_INFO(rx_roce_frames)},

drivers/net/ethernet/emulex/benet/be_main.c

@@ -179,7 +179,7 @@ static void be_intr_set(struct be_adapter *adapter, bool enable)
 	if (lancer_chip(adapter))
 		return;
 
-	if (adapter->eeh_error)
+	if (be_check_error(adapter, BE_ERROR_EEH))
 		return;
 
 	status = be_cmd_intr_set(adapter, enable);
@@ -191,6 +191,9 @@ static void be_rxq_notify(struct be_adapter *adapter, u16 qid, u16 posted)
 {
 	u32 val = 0;
 
+	if (be_check_error(adapter, BE_ERROR_HW))
+		return;
+
 	val |= qid & DB_RQ_RING_ID_MASK;
 	val |= posted << DB_RQ_NUM_POSTED_SHIFT;
 
@@ -203,6 +206,9 @@ static void be_txq_notify(struct be_adapter *adapter, struct be_tx_obj *txo,
 {
 	u32 val = 0;
 
+	if (be_check_error(adapter, BE_ERROR_HW))
+		return;
+
 	val |= txo->q.id & DB_TXULP_RING_ID_MASK;
 	val |= (posted & DB_TXULP_NUM_POSTED_MASK) << DB_TXULP_NUM_POSTED_SHIFT;
 
@@ -219,7 +225,7 @@ static void be_eq_notify(struct be_adapter *adapter, u16 qid,
 	val |= qid & DB_EQ_RING_ID_MASK;
 	val |= ((qid & DB_EQ_RING_ID_EXT_MASK) << DB_EQ_RING_ID_EXT_MASK_SHIFT);
 
-	if (adapter->eeh_error)
+	if (be_check_error(adapter, BE_ERROR_HW))
 		return;
 
 	if (arm)
@@ -240,7 +246,7 @@ void be_cq_notify(struct be_adapter *adapter, u16 qid, bool arm, u16 num_popped)
 	val |= ((qid & DB_CQ_RING_ID_EXT_MASK) <<
 			DB_CQ_RING_ID_EXT_MASK_SHIFT);
 
-	if (adapter->eeh_error)
+	if (be_check_error(adapter, BE_ERROR_HW))
 		return;
 
 	if (arm)
@@ -814,6 +820,8 @@ static void wrb_fill_hdr(struct be_adapter *adapter,
 
 	SET_TX_WRB_HDR_BITS(num_wrb, hdr, skb_wrb_cnt(skb));
 	SET_TX_WRB_HDR_BITS(len, hdr, skb->len);
+	SET_TX_WRB_HDR_BITS(mgmt, hdr,
+			    BE_WRB_F_GET(wrb_params->features, OS2BMC));
 }
 
 static void unmap_tx_frag(struct device *dev, struct be_eth_wrb *wrb,
@@ -1150,6 +1158,130 @@ static void be_xmit_flush(struct be_adapter *adapter, struct be_tx_obj *txo)
 	txo->pend_wrb_cnt = 0;
 }
 
+/* OS2BMC related */
+
+#define DHCP_CLIENT_PORT	68
+#define DHCP_SERVER_PORT	67
+#define NET_BIOS_PORT1		137
+#define NET_BIOS_PORT2		138
+#define DHCPV6_RAS_PORT		547
+
+#define is_mc_allowed_on_bmc(adapter, eh)	\
+	(!is_multicast_filt_enabled(adapter) &&	\
+	 is_multicast_ether_addr(eh->h_dest) &&	\
+	 !is_broadcast_ether_addr(eh->h_dest))
+
+#define is_bc_allowed_on_bmc(adapter, eh)	\
+	(!is_broadcast_filt_enabled(adapter) &&	\
+	 is_broadcast_ether_addr(eh->h_dest))
+
+#define is_arp_allowed_on_bmc(adapter, skb)	\
+	(is_arp(skb) && is_arp_filt_enabled(adapter))
+
+#define is_broadcast_packet(eh, adapter)	\
+		(is_multicast_ether_addr(eh->h_dest) && \
+		!compare_ether_addr(eh->h_dest, adapter->netdev->broadcast))
+
+#define is_arp(skb)	(skb->protocol == htons(ETH_P_ARP))
+
+#define is_arp_filt_enabled(adapter)	\
+		(adapter->bmc_filt_mask & (BMC_FILT_BROADCAST_ARP))
+
+#define is_dhcp_client_filt_enabled(adapter)	\
+		(adapter->bmc_filt_mask & BMC_FILT_BROADCAST_DHCP_CLIENT)
+
+#define is_dhcp_srvr_filt_enabled(adapter)	\
+		(adapter->bmc_filt_mask & BMC_FILT_BROADCAST_DHCP_SERVER)
+
+#define is_nbios_filt_enabled(adapter)	\
+		(adapter->bmc_filt_mask & BMC_FILT_BROADCAST_NET_BIOS)
+
+#define is_ipv6_na_filt_enabled(adapter)	\
+		(adapter->bmc_filt_mask &	\
+			BMC_FILT_MULTICAST_IPV6_NEIGH_ADVER)
+
+#define is_ipv6_ra_filt_enabled(adapter)	\
+		(adapter->bmc_filt_mask & BMC_FILT_MULTICAST_IPV6_RA)
+
+#define is_ipv6_ras_filt_enabled(adapter)	\
+		(adapter->bmc_filt_mask & BMC_FILT_MULTICAST_IPV6_RAS)
+
+#define is_broadcast_filt_enabled(adapter)	\
+		(adapter->bmc_filt_mask & BMC_FILT_BROADCAST)
+
+#define is_multicast_filt_enabled(adapter)	\
+		(adapter->bmc_filt_mask & BMC_FILT_MULTICAST)
+
+static bool be_send_pkt_to_bmc(struct be_adapter *adapter,
+			       struct sk_buff **skb)
+{
+	struct ethhdr *eh = (struct ethhdr *)(*skb)->data;
+	bool os2bmc = false;
+
+	if (!be_is_os2bmc_enabled(adapter))
+		goto done;
+
+	if (!is_multicast_ether_addr(eh->h_dest))
+		goto done;
+
+	if (is_mc_allowed_on_bmc(adapter, eh) ||
+	    is_bc_allowed_on_bmc(adapter, eh) ||
+	    is_arp_allowed_on_bmc(adapter, (*skb))) {
+		os2bmc = true;
+		goto done;
+	}
+
+	if ((*skb)->protocol == htons(ETH_P_IPV6)) {
+		struct ipv6hdr *hdr = ipv6_hdr((*skb));
+		u8 nexthdr = hdr->nexthdr;
+
+		if (nexthdr == IPPROTO_ICMPV6) {
+			struct icmp6hdr *icmp6 = icmp6_hdr((*skb));
+
+			switch (icmp6->icmp6_type) {
+			case NDISC_ROUTER_ADVERTISEMENT:
+				os2bmc = is_ipv6_ra_filt_enabled(adapter);
+				goto done;
+			case NDISC_NEIGHBOUR_ADVERTISEMENT:
+				os2bmc = is_ipv6_na_filt_enabled(adapter);
+				goto done;
+			default:
+				break;
+			}
+		}
+	}
+
+	if (is_udp_pkt((*skb))) {
+		struct udphdr *udp = udp_hdr((*skb));
+
+		switch (udp->dest) {
+		case DHCP_CLIENT_PORT:
+			os2bmc = is_dhcp_client_filt_enabled(adapter);
+			goto done;
+		case DHCP_SERVER_PORT:
+			os2bmc = is_dhcp_srvr_filt_enabled(adapter);
+			goto done;
+		case NET_BIOS_PORT1:
+		case NET_BIOS_PORT2:
+			os2bmc = is_nbios_filt_enabled(adapter);
+			goto done;
+		case DHCPV6_RAS_PORT:
+			os2bmc = is_ipv6_ras_filt_enabled(adapter);
+			goto done;
+		default:
+			break;
+		}
+	}
+done:
+	/* For packets over a vlan, which are destined
+	 * to BMC, asic expects the vlan to be inline in the packet.
+	 */
+	if (os2bmc)
+		*skb = be_insert_vlan_in_pkt(adapter, *skb, NULL);
+
+	return os2bmc;
+}
+
 static netdev_tx_t be_xmit(struct sk_buff *skb, struct net_device *netdev)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
@@ -1171,6 +1303,18 @@ static netdev_tx_t be_xmit(struct sk_buff *skb, struct net_device *netdev)
 		goto drop;
 	}
 
+	/* if os2bmc is enabled and if the pkt is destined to bmc,
+	 * enqueue the pkt a 2nd time with mgmt bit set.
+	 */
+	if (be_send_pkt_to_bmc(adapter, &skb)) {
+		BE_WRB_F_SET(wrb_params.features, OS2BMC, 1);
+		wrb_cnt = be_xmit_enqueue(adapter, txo, skb, &wrb_params);
+		if (unlikely(!wrb_cnt))
+			goto drop;
+		else
+			skb_get(skb);
+	}
+
 	if (be_is_txq_full(txo)) {
 		netif_stop_subqueue(netdev, q_idx);
 		tx_stats(txo)->tx_stops++;
@@ -2324,7 +2468,9 @@ static void be_rx_cq_clean(struct be_rx_obj *rxo)
 			if (lancer_chip(adapter))
 				break;
 
-			if (flush_wait++ > 10 || be_hw_error(adapter)) {
+			if (flush_wait++ > 50 ||
+			    be_check_error(adapter,
+					   BE_ERROR_HW)) {
 				dev_warn(&adapter->pdev->dev,
 					 "did not receive flush compl\n");
 				break;
@@ -2385,7 +2531,8 @@ static void be_tx_compl_clean(struct be_adapter *adapter)
 				pending_txqs--;
 		}
 
-		if (pending_txqs == 0 || ++timeo > 10 || be_hw_error(adapter))
+		if (pending_txqs == 0 || ++timeo > 10 ||
+		    be_check_error(adapter, BE_ERROR_HW))
 			break;
 
 		mdelay(1);
@@ -2995,22 +3142,19 @@ void be_detect_error(struct be_adapter *adapter)
 	u32 ue_lo = 0, ue_hi = 0, ue_lo_mask = 0, ue_hi_mask = 0;
 	u32 sliport_status = 0, sliport_err1 = 0, sliport_err2 = 0;
 	u32 i;
-	bool error_detected = false;
 	struct device *dev = &adapter->pdev->dev;
-	struct net_device *netdev = adapter->netdev;
 
-	if (be_hw_error(adapter))
+	if (be_check_error(adapter, BE_ERROR_HW))
 		return;
 
 	if (lancer_chip(adapter)) {
 		sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET);
 		if (sliport_status & SLIPORT_STATUS_ERR_MASK) {
+			be_set_error(adapter, BE_ERROR_UE);
 			sliport_err1 = ioread32(adapter->db +
 						SLIPORT_ERROR1_OFFSET);
 			sliport_err2 = ioread32(adapter->db +
 						SLIPORT_ERROR2_OFFSET);
-			adapter->hw_error = true;
-			error_detected = true;
 			/* Do not log error messages if its a FW reset */
 			if (sliport_err1 == SLIPORT_ERROR_FW_RESET1 &&
 			    sliport_err2 == SLIPORT_ERROR_FW_RESET2) {
@@ -3042,12 +3186,12 @@ void be_detect_error(struct be_adapter *adapter)
 		 */
 
 		if (ue_lo || ue_hi) {
-			error_detected = true;
 			dev_err(dev,
 				"Unrecoverable Error detected in the adapter");
 			dev_err(dev, "Please reboot server to recover");
 			if (skyhawk_chip(adapter))
-				adapter->hw_error = true;
+				be_set_error(adapter, BE_ERROR_UE);
+
 			for (i = 0; ue_lo; ue_lo >>= 1, i++) {
 				if (ue_lo & 1)
 					dev_err(dev, "UE: %s bit set\n",
@@ -3060,8 +3204,6 @@ void be_detect_error(struct be_adapter *adapter)
 			}
 		}
 	}
-	if (error_detected)
-		netif_carrier_off(netdev);
 }
 
 static void be_msix_disable(struct be_adapter *adapter)
@@ -4183,7 +4325,7 @@ static int be_func_init(struct be_adapter *adapter)
 		msleep(100);
 
 		/* We can clear all errors when function reset succeeds */
-		be_clear_all_error(adapter);
+		be_clear_error(adapter, BE_CLEAR_ALL);
 	}
 
 	/* Tell FW we're ready to fire cmds */
@@ -5204,7 +5346,7 @@ static void be_err_detection_task(struct work_struct *work)
 
 	be_detect_error(adapter);
 
-	if (adapter->hw_error) {
+	if (be_check_error(adapter, BE_ERROR_HW)) {
 		be_cleanup(adapter);
 
 		/* As of now error recovery support is in Lancer only */
@@ -5470,6 +5612,30 @@ static void be_remove(struct pci_dev *pdev)
 	free_netdev(adapter->netdev);
 }
 
+ssize_t be_hwmon_show_temp(struct device *dev,
+			   struct device_attribute *dev_attr,
+			   char *buf)
+{
+	struct be_adapter *adapter = dev_get_drvdata(dev);
+
+	/* Unit: millidegree Celsius */
+	if (adapter->hwmon_info.be_on_die_temp == BE_INVALID_DIE_TEMP)
+		return -EIO;
+	else
+		return sprintf(buf, "%u\n",
+			       adapter->hwmon_info.be_on_die_temp * 1000);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
+			  be_hwmon_show_temp, NULL, 1);
+
+static struct attribute *be_hwmon_attrs[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(be_hwmon);
+
 static char *mc_name(struct be_adapter *adapter)
 {
 	char *str = "";	/* default */
@@ -5589,6 +5755,16 @@ static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id)
 
 	be_schedule_err_detection(adapter);
 
+	/* On Die temperature not supported for VF. */
+	if (be_physfn(adapter)) {
+		adapter->hwmon_info.hwmon_dev =
+			devm_hwmon_device_register_with_groups(&pdev->dev,
+							       DRV_NAME,
+							       adapter,
+							       be_hwmon_groups);
+		adapter->hwmon_info.be_on_die_temp = BE_INVALID_DIE_TEMP;
+	}
+
 	dev_info(&pdev->dev, "%s: %s %s port %c\n", nic_name(pdev),
 		 func_name(adapter), mc_name(adapter), adapter->port_name);
 
@@ -5681,8 +5857,8 @@ static pci_ers_result_t be_eeh_err_detected(struct pci_dev *pdev,
 
 	dev_err(&adapter->pdev->dev, "EEH error detected\n");
 
-	if (!adapter->eeh_error) {
-		adapter->eeh_error = true;
+	if (!be_check_error(adapter, BE_ERROR_EEH)) {
+		be_set_error(adapter, BE_ERROR_EEH);
 
 		be_cancel_err_detection(adapter);
 
@@ -5729,7 +5905,7 @@ static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev)
 		return PCI_ERS_RESULT_DISCONNECT;
 
 	pci_cleanup_aer_uncorrect_error_status(pdev);
-	be_clear_all_error(adapter);
+	be_clear_error(adapter, BE_CLEAR_ALL);
 	return PCI_ERS_RESULT_RECOVERED;
 }