macb: convert printk to netdev_ and friends

macb is already using the dev_dbg() and friends helpers so use netdev_()
along with a pr_fmt() definition to make the printing a little cleaner.
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

drivers/net/ethernet/cadence/macb.c

@@ -8,6 +8,7 @@
  * published by the Free Software Foundation.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 #include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -82,7 +83,7 @@ static void __init macb_get_hwaddr(struct macb *bp)
 	if (is_valid_ether_addr(addr)) {
 		memcpy(bp->dev->dev_addr, addr, sizeof(addr));
 	} else {
-		dev_info(&bp->pdev->dev, "invalid hw address, using random\n");
+		netdev_info(bp->dev, "invalid hw address, using random\n");
 		random_ether_addr(bp->dev->dev_addr);
 	}
 }
@@ -176,11 +177,12 @@ static void macb_handle_link_change(struct net_device *dev)
 
 	if (status_change) {
 		if (phydev->link)
-			printk(KERN_INFO "%s: link up (%d/%s)\n",
-			       dev->name, phydev->speed,
-			       DUPLEX_FULL == phydev->duplex ? "Full":"Half");
+			netdev_info(dev, "link up (%d/%s)\n",
+				    phydev->speed,
+				    phydev->duplex == DUPLEX_FULL ?
+				    "Full" : "Half");
 		else
-			printk(KERN_INFO "%s: link down\n", dev->name);
+			netdev_info(dev, "link down\n");
 	}
 }
 
@@ -194,7 +196,7 @@ static int macb_mii_probe(struct net_device *dev)
 
 	phydev = phy_find_first(bp->mii_bus);
 	if (!phydev) {
-		printk (KERN_ERR "%s: no PHY found\n", dev->name);
+		netdev_err(dev, "no PHY found\n");
 		return -1;
 	}
 
@@ -207,7 +209,7 @@ static int macb_mii_probe(struct net_device *dev)
 				 PHY_INTERFACE_MODE_RMII :
 				 PHY_INTERFACE_MODE_MII);
 	if (ret) {
-		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
+		netdev_err(dev, "Could not attach to PHY\n");
 		return ret;
 	}
 
@@ -301,13 +303,12 @@ static void macb_tx(struct macb *bp)
 	status = macb_readl(bp, TSR);
 	macb_writel(bp, TSR, status);
 
-	dev_dbg(&bp->pdev->dev, "macb_tx status = %02lx\n",
-		(unsigned long)status);
+	netdev_dbg(bp->dev, "macb_tx status = %02lx\n", (unsigned long)status);
 
 	if (status & (MACB_BIT(UND) | MACB_BIT(TSR_RLE))) {
 		int i;
-		printk(KERN_ERR "%s: TX %s, resetting buffers\n",
-			bp->dev->name, status & MACB_BIT(UND) ?
+		netdev_err(bp->dev, "TX %s, resetting buffers\n",
+			   status & MACB_BIT(UND) ?
 			   "underrun" : "retry limit exceeded");
 
 		/* Transfer ongoing, disable transmitter, to avoid confusion */
@@ -367,7 +368,7 @@ static void macb_tx(struct macb *bp)
 		if (!(bufstat & MACB_BIT(TX_USED)))
 			break;
 
-		dev_dbg(&bp->pdev->dev, "skb %u (data %p) TX complete\n",
+		netdev_dbg(bp->dev, "skb %u (data %p) TX complete\n",
 			   tail, skb->data);
 		dma_unmap_single(&bp->pdev->dev, rp->mapping, skb->len,
 				 DMA_TO_DEVICE);
@@ -393,7 +394,7 @@ static int macb_rx_frame(struct macb *bp, unsigned int first_frag,
 
 	len = MACB_BFEXT(RX_FRMLEN, bp->rx_ring[last_frag].ctrl);
 
-	dev_dbg(&bp->pdev->dev, "macb_rx_frame frags %u - %u (len %u)\n",
+	netdev_dbg(bp->dev, "macb_rx_frame frags %u - %u (len %u)\n",
 		   first_frag, last_frag, len);
 
 	skb = dev_alloc_skb(len + RX_OFFSET);
@@ -435,7 +436,7 @@ static int macb_rx_frame(struct macb *bp, unsigned int first_frag,
 
 	bp->stats.rx_packets++;
 	bp->stats.rx_bytes += len;
-	dev_dbg(&bp->pdev->dev, "received skb of length %u, csum: %08x\n",
+	netdev_dbg(bp->dev, "received skb of length %u, csum: %08x\n",
 		   skb->len, skb->csum);
 	netif_receive_skb(skb);
 
@@ -513,7 +514,7 @@ static int macb_poll(struct napi_struct *napi, int budget)
 
 	work_done = 0;
 
-	dev_dbg(&bp->pdev->dev, "poll: status = %08lx, budget = %d\n",
+	netdev_dbg(bp->dev, "poll: status = %08lx, budget = %d\n",
 		   (unsigned long)status, budget);
 
 	work_done = macb_rx(bp, budget);
@@ -563,8 +564,7 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
 			macb_writel(bp, IDR, MACB_RX_INT_FLAGS);
 
 			if (napi_schedule_prep(&bp->napi)) {
-				dev_dbg(&bp->pdev->dev,
-					"scheduling RX softirq\n");
+				netdev_dbg(bp->dev, "scheduling RX softirq\n");
 				__napi_schedule(&bp->napi);
 			}
 		}
@@ -585,11 +585,11 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
 
 		if (status & MACB_BIT(HRESP)) {
 			/*
-			 * TODO: Reset the hardware, and maybe move the printk
-			 * to a lower-priority context as well (work queue?)
+			 * TODO: Reset the hardware, and maybe move the
+			 * netdev_err to a lower-priority context as well
+			 * (work queue?)
 			 */
-			printk(KERN_ERR "%s: DMA bus error: HRESP not OK\n",
-			       dev->name);
+			netdev_err(dev, "DMA bus error: HRESP not OK\n");
 		}
 
 		status = macb_readl(bp, ISR);
@@ -624,16 +624,12 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	unsigned long flags;
 
 #ifdef DEBUG
-	int i;
-	dev_dbg(&bp->pdev->dev,
+	netdev_dbg(bp->dev,
 		   "start_xmit: len %u head %p data %p tail %p end %p\n",
 		   skb->len, skb->head, skb->data,
 		   skb_tail_pointer(skb), skb_end_pointer(skb));
-	dev_dbg(&bp->pdev->dev,
-		"data:");
-	for (i = 0; i < 16; i++)
-		printk(" %02x", (unsigned int)skb->data[i]);
-	printk("\n");
+	print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_OFFSET, 16, 1,
+		       skb->data, 16, true);
 #endif
 
 	len = skb->len;
@@ -643,20 +639,19 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (TX_BUFFS_AVAIL(bp) < 1) {
 		netif_stop_queue(dev);
 		spin_unlock_irqrestore(&bp->lock, flags);
-		dev_err(&bp->pdev->dev,
-			"BUG! Tx Ring full when queue awake!\n");
-		dev_dbg(&bp->pdev->dev, "tx_head = %u, tx_tail = %u\n",
+		netdev_err(bp->dev, "BUG! Tx Ring full when queue awake!\n");
+		netdev_dbg(bp->dev, "tx_head = %u, tx_tail = %u\n",
 			   bp->tx_head, bp->tx_tail);
 		return NETDEV_TX_BUSY;
 	}
 
 	entry = bp->tx_head;
-	dev_dbg(&bp->pdev->dev, "Allocated ring entry %u\n", entry);
+	netdev_dbg(bp->dev, "Allocated ring entry %u\n", entry);
 	mapping = dma_map_single(&bp->pdev->dev, skb->data,
 				 len, DMA_TO_DEVICE);
 	bp->tx_skb[entry].skb = skb;
 	bp->tx_skb[entry].mapping = mapping;
-	dev_dbg(&bp->pdev->dev, "Mapped skb data %p to DMA addr %08lx\n",
+	netdev_dbg(bp->dev, "Mapped skb data %p to DMA addr %08lx\n",
 		   skb->data, (unsigned long)mapping);
 
 	ctrl = MACB_BF(TX_FRMLEN, len);
@@ -721,7 +716,7 @@ static int macb_alloc_consistent(struct macb *bp)
 					 &bp->rx_ring_dma, GFP_KERNEL);
 	if (!bp->rx_ring)
 		goto out_err;
-	dev_dbg(&bp->pdev->dev,
+	netdev_dbg(bp->dev,
 		   "Allocated RX ring of %d bytes at %08lx (mapped %p)\n",
 		   size, (unsigned long)bp->rx_ring_dma, bp->rx_ring);
 
@@ -730,7 +725,7 @@ static int macb_alloc_consistent(struct macb *bp)
 					 &bp->tx_ring_dma, GFP_KERNEL);
 	if (!bp->tx_ring)
 		goto out_err;
-	dev_dbg(&bp->pdev->dev,
+	netdev_dbg(bp->dev,
 		   "Allocated TX ring of %d bytes at %08lx (mapped %p)\n",
 		   size, (unsigned long)bp->tx_ring_dma, bp->tx_ring);
 
@@ -739,7 +734,7 @@ static int macb_alloc_consistent(struct macb *bp)
 					    &bp->rx_buffers_dma, GFP_KERNEL);
 	if (!bp->rx_buffers)
 		goto out_err;
-	dev_dbg(&bp->pdev->dev,
+	netdev_dbg(bp->dev,
 		   "Allocated RX buffers of %d bytes at %08lx (mapped %p)\n",
 		   size, (unsigned long)bp->rx_buffers_dma, bp->rx_buffers);
 
@@ -952,7 +947,7 @@ static int macb_open(struct net_device *dev)
 	struct macb *bp = netdev_priv(dev);
 	int err;
 
-	dev_dbg(&bp->pdev->dev, "open\n");
+	netdev_dbg(bp->dev, "open\n");
 
 	/* if the phy is not yet register, retry later*/
 	if (!bp->phy_dev)
@@ -963,9 +958,8 @@ static int macb_open(struct net_device *dev)
 
 	err = macb_alloc_consistent(bp);
 	if (err) {
-		printk(KERN_ERR
-		       "%s: Unable to allocate DMA memory (error %d)\n",
-		       dev->name, err);
+		netdev_err(dev, "Unable to allocate DMA memory (error %d)\n",
+			   err);
 		return err;
 	}
 
@@ -1174,9 +1168,8 @@ static int __init macb_probe(struct platform_device *pdev)
 	dev->irq = platform_get_irq(pdev, 0);
 	err = request_irq(dev->irq, macb_interrupt, 0, dev->name, dev);
 	if (err) {
-		printk(KERN_ERR
-		       "%s: Unable to request IRQ %d (error %d)\n",
-		       dev->name, dev->irq, err);
+		dev_err(&pdev->dev, "Unable to request IRQ %d (error %d)\n",
+			dev->irq, err);
 		goto err_out_iounmap;
 	}
 
@@ -1228,12 +1221,11 @@ static int __init macb_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, dev);
 
-	printk(KERN_INFO "%s: Atmel MACB at 0x%08lx irq %d (%pM)\n",
-	       dev->name, dev->base_addr, dev->irq, dev->dev_addr);
+	netdev_info(dev, "Atmel MACB at 0x%08lx irq %d (%pM)\n",
+		dev->base_addr, dev->irq, dev->dev_addr);
 
 	phydev = bp->phy_dev;
-	printk(KERN_INFO "%s: attached PHY driver [%s] "
-		"(mii_bus:phy_addr=%s, irq=%d)\n", dev->name,
+	netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
 		    phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
 
 	return 0;