host struct cleanups

drivers/scsi/BusLogic.h

@@ -55,8 +55,6 @@ extern int BusLogic_DetectHostAdapter(SCSI_Host_Template_T *);
 extern int BusLogic_ReleaseHostAdapter(SCSI_Host_T *);
 extern int BusLogic_QueueCommand(SCSI_Command_T *,
 				 void (*CompletionRoutine)(SCSI_Command_T *));
-extern int BusLogic_AbortCommand(SCSI_Command_T *);
-extern int BusLogic_ResetCommand(SCSI_Command_T *, unsigned int);
 extern int BusLogic_BIOSDiskParameters(SCSI_Disk_T *, struct block_device *,
 				       int *);
 extern int BusLogic_ProcDirectoryInfo(char *, char **, off_t, int, int, int);
@@ -75,8 +73,6 @@ extern int BusLogic_SlaveAttach(SCSI_Device_T *);
     release:        BusLogic_ReleaseHostAdapter,  /* Release Host Adapter   */ \
     info:           BusLogic_DriverInfo,	  /* Driver Info Function   */ \
     queuecommand:   BusLogic_QueueCommand,	  /* Queue Command Function */ \
-    abort:          BusLogic_AbortCommand,	  /* Abort Command Function */ \
-    reset:          BusLogic_ResetCommand,	  /* Reset Command Function */ \
     slave_attach:   BusLogic_SlaveAttach,	  /* Configure a SCSI_Device*/ \
     bios_param:     BusLogic_BIOSDiskParameters,  /* BIOS Disk Parameters   */ \
     unchecked_isa_dma: 1,			  /* Default Initial Value  */ \

drivers/scsi/aic7xxx_old/aic7xxx.h

@@ -35,13 +35,6 @@
 	release: aic7xxx_release,				\
 	info: aic7xxx_info,					\
 	queuecommand: aic7xxx_queue,				\
-	eh_strategy_handler: NULL,				\
-	eh_abort_handler: NULL,					\
-	eh_device_reset_handler: NULL,				\
-	eh_bus_reset_handler: NULL,				\
-	eh_host_reset_handler: NULL,				\
-	abort: aic7xxx_abort,					\
-	reset: aic7xxx_reset,					\
 	slave_attach: aic7xxx_slave_attach,			\
 	slave_detach: aic7xxx_slave_detach,			\
 	bios_param: aic7xxx_biosparam,				\
@@ -58,8 +51,6 @@ extern int aic7xxx_queue(Scsi_Cmnd *, void (*)(Scsi_Cmnd *));
 extern int aic7xxx_biosparam(Disk *, struct block_device *, int[]);
 extern int aic7xxx_detect(Scsi_Host_Template *);
 extern int aic7xxx_command(Scsi_Cmnd *);
-extern int aic7xxx_reset(Scsi_Cmnd *, unsigned int);
-extern int aic7xxx_abort(Scsi_Cmnd *);
 extern int aic7xxx_release(struct Scsi_Host *);
 extern int aic7xxx_slave_attach(Scsi_Device *);
 extern void aic7xxx_slave_detach(Scsi_Device *);

drivers/scsi/cpqfcTS.h

@@ -28,8 +28,6 @@ extern int cpqfcTS_ioctl( Scsi_Device *ScsiDev, int Cmnd, void *arg);
  queuecommand:           cpqfcTS_queuecommand,   \
  eh_device_reset_handler:   cpqfcTS_eh_device_reset,   \
  eh_abort_handler:       cpqfcTS_eh_abort,       \
- reset:                  cpqfcTS_reset,          \
- abort:                  cpqfcTS_abort,		 \
  bios_param:             cpqfcTS_biosparam,      \
  can_queue:              CPQFCTS_REQ_QUEUE_LEN,  \
  this_id:                -1,                     \

drivers/scsi/eata.h

@@ -21,11 +21,7 @@ static int eata2x_slave_attach(Scsi_Device *);
                 detect:                  eata2x_detect,                      \
                 release:                 eata2x_release,                     \
                 queuecommand:            eata2x_queuecommand,                \
-                abort:                   NULL,                               \
-                reset:                   NULL,                               \
                 eh_abort_handler:        eata2x_abort,                       \
-                eh_device_reset_handler: NULL,                               \
-                eh_bus_reset_handler:    NULL,                               \
                 eh_host_reset_handler:   eata2x_reset,                       \
                 bios_param:              eata2x_biosparam,                   \
 		slave_attach:		 eata2x_slave_attach,		     \

drivers/scsi/in2000.c

@@ -832,7 +832,7 @@ int i;
 
 static void in2000_intr (int irqnum, void * dev_id, struct pt_regs *ptregs)
 {
-struct Scsi_Host *instance;
+struct Scsi_Host *instance = dev_id;
 struct IN2000_hostdata *hostdata;
 Scsi_Cmnd *patch, *cmd;
 uchar asr, sr, phs, id, lun, *ucp, msg;
@@ -842,14 +842,6 @@ unsigned short *sp;
 unsigned short f;
 unsigned long flags;
 
-   for (instance = instance_list; instance; instance = instance->next) {
-      if (instance->irq == irqnum)
-         break;
-      }
-   if (!instance) {
-      printk("*** Hmm... interrupts are screwed up! ***\n");
-      return;
-      }
    hostdata = (struct IN2000_hostdata *)instance->hostdata;
 
 /* Get the spin_lock and disable further ints, for SMP */
@@ -2046,7 +2038,7 @@ char buf[32];
       write1_io(0,IO_FIFO_READ);             /* start fifo out in read mode */
       write1_io(0,IO_INTR_MASK);    /* allow all ints */
       x = int_tab[(switches & (SW_INT0 | SW_INT1)) >> SW_INT_SHIFT];
-      if (request_irq(x, in2000_intr, SA_INTERRUPT, "in2000", NULL)) {
+      if (request_irq(x, in2000_intr, SA_INTERRUPT, "in2000", instance)) {
          printk("in2000_detect: Unable to allocate IRQ.\n");
          detect_count--;
          continue;
@@ -2215,10 +2207,7 @@ Scsi_Cmnd *cmd;
 int x,i;
 static int stop = 0;
 
-   for (instance=instance_list; instance; instance=instance->next) {
-      if (instance->host_no == hn)
-         break;
-      }
+   instance = scsi_host_hn_get(hn);
    if (!instance) {
       printk("*** Hmm... Can't find host #%d!\n",hn);
       return (-ESRCH);

drivers/scsi/inia100.h

@@ -88,23 +88,11 @@ extern int inia100_biosparam(Scsi_Disk *, struct block_device *, int *);
 #define inia100_REVID "Initio INI-A100U2W SCSI device driver; Revision: 1.02d"
 
 #define INIA100	{ \
-	module:		NULL,						\
 	proc_name:	"inia100", \
-	proc_info:	NULL,				\
 	name:		inia100_REVID, \
 	detect:		inia100_detect, \
 	release:	inia100_release, \
-	info:		NULL,					\
-	command:	NULL, \
 	queuecommand:	inia100_queue, \
- 	eh_strategy_handler: NULL, \
- 	eh_abort_handler: NULL, \
- 	eh_device_reset_handler: NULL, \
- 	eh_bus_reset_handler: NULL, \
- 	eh_host_reset_handler: NULL, \
-	abort:		inia100_abort, \
-	reset:		inia100_reset, \
-	slave_attach:	NULL, \
 	bios_param:	inia100_biosparam, \
 	can_queue:	1, \
 	this_id:	1, \

drivers/scsi/ips.h

@@ -464,23 +464,13 @@
 }
 #else
  #define IPS {                            \
-    module : NULL,                        \
-    proc_info : NULL,                     \
-    name : NULL,                          \
     detect : ips_detect,                  \
     release : ips_release,                \
     info : ips_info,                      \
-    command : NULL,                       \
     queuecommand : ips_queue,             \
-    eh_strategy_handler : NULL,           \
     eh_abort_handler : ips_eh_abort,      \
-    eh_device_reset_handler : NULL,       \
-    eh_bus_reset_handler : NULL,          \
     eh_host_reset_handler : ips_eh_reset, \
-    abort : NULL,                         \
-    reset : NULL,                         \
     slave_attach : ips_slave_attach,      \
-    slave_detach : NULL,                  \
     bios_param : ips_biosparam,           \
     can_queue : 0,                        \
     this_id: -1,                          \

drivers/scsi/ncr53c8xx.c

@@ -9125,12 +9125,9 @@ static int ncr53c8xx_proc_info(char *buffer, char **start, off_t offset,
 printk("ncr53c8xx_proc_info: hostno=%d, func=%d\n", hostno, func);
 #endif
 
-	for (host = first_host; host; host = host->next) {
-		if (host->hostt == the_template && host->host_no == hostno) {
+	if ((host = scsi_host_hn_get(hostno)) != NULL) {
 		host_data = (struct host_data *) host->hostdata;
 		ncb = host_data->ncb;
-			break;
-		}
 	}
 
 	if (!ncb)

drivers/scsi/ncr53c8xx.h

@@ -76,8 +76,6 @@ int ncr53c8xx_release(struct Scsi_Host *);
 			info:           ncr53c8xx_info, 	\
 			queuecommand:   ncr53c8xx_queue_command,\
 			slave_attach:   ncr53c8xx_slave_attach, \
-			abort:          ncr53c8xx_abort,	\
-			reset:          ncr53c8xx_reset,	\
 			bios_param:     scsicam_bios_param,	\
 			can_queue:      SCSI_NCR_CAN_QUEUE,	\
 			this_id:        7,			\

drivers/scsi/qla1280.h

@@ -1324,25 +1324,12 @@ void qla1280_setup(char *s, int *dummy);
  */
 
 #define QLA1280_LINUX_TEMPLATE {				\
-	next: NULL,						\
-	module: NULL,						\
-	proc_dir: NULL,						\
 	proc_info: qla1280_proc_info,				\
 	name: "Qlogic ISP 1280/12160",				\
 	detect: qla1280_detect,					\
 	release: qla1280_release,				\
 	info: qla1280_info,					\
-	ioctl: NULL,						\
-	command: NULL,						\
 	queuecommand: qla1280_queuecommand,			\
-	eh_strategy_handler: NULL,				\
-	eh_abort_handler: NULL,					\
-	eh_device_reset_handler: NULL,				\
-	eh_bus_reset_handler: NULL,				\
-	eh_host_reset_handler: NULL,				\
-/*	use_new_eh_code: 0, */					\
-	abort: qla1280_abort,					\
-	reset: qla1280_reset,					\
 	slave_attach: qla1280_slave_attach,			\
 	bios_param: qla1280_biosparam,				\
 	can_queue: 255,		/* max simultaneous cmds      */\

drivers/scsi/qlogicfc.h

@@ -87,7 +87,6 @@ int isp2x00_biosparam(Disk *, struct block_device *, int[]);
         info:                   isp2x00_info,                              \
         queuecommand:           isp2x00_queuecommand,                      \
         eh_abort_handler:       isp2x00_abort,                             \
-        reset:                  isp2x00_reset,                             \
         bios_param:             isp2x00_biosparam,                         \
         can_queue:              QLOGICFC_REQ_QUEUE_LEN,                    \
         this_id:                -1,                                        \

drivers/scsi/qlogicisp.h

@@ -75,8 +75,6 @@ int isp1020_biosparam(Disk *, struct block_device *, int[]);
 	release:		isp1020_release,			   \
 	info:			isp1020_info,				   \
 	queuecommand:		isp1020_queuecommand,			   \
-	abort:			isp1020_abort,				   \
-	reset:			isp1020_reset,				   \
 	bios_param:		isp1020_biosparam,			   \
 	can_queue:		QLOGICISP_REQ_QUEUE_LEN,		   \
 	this_id:		-1,					   \

drivers/scsi/sym53c8xx.h

@@ -91,8 +91,6 @@ int sym53c8xx_release(struct Scsi_Host *);
 			info:           sym53c8xx_info, 	\
 			queuecommand:   sym53c8xx_queue_command,\
 			slave_attach:   sym53c8xx_slave_attach, \
-			abort:          sym53c8xx_abort,	\
-			reset:          sym53c8xx_reset,	\
 			bios_param:     scsicam_bios_param,	\
 			can_queue:      SCSI_NCR_CAN_QUEUE,	\
 			this_id:        7,			\

drivers/scsi/wd7000.h

@@ -49,7 +49,6 @@ static int wd7000_biosparam(Disk *, struct block_device *, int *);
 	detect:			wd7000_detect,			\
 	command:		wd7000_command,			\
 	queuecommand:		wd7000_queuecommand,		\
-	abort:			wd7000_abort,			\
 	eh_bus_reset_handler:	wd7000_bus_reset,		\
 	eh_device_reset_handler:wd7000_device_reset,		\
 	eh_host_reset_handler:	wd7000_host_reset,		\