scsi: ufshcd: use an enum for quirks

Use an enum to specify the various quirks instead of #defines inside the
structure definition.

[mkp: fix typo]

Link: https://lore.kernel.org/r/20200221140812.476338-3-hch@lst.deReviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/ufs/ufshcd.h

@@ -470,6 +470,48 @@ struct ufs_stats {
 	struct ufs_err_reg_hist task_abort;
 };
 
+enum ufshcd_quirks {
+	/* Interrupt aggregation support is broken */
+	UFSHCD_QUIRK_BROKEN_INTR_AGGR			= 1 << 0,
+
+	/*
+	 * delay before each dme command is required as the unipro
+	 * layer has shown instabilities
+	 */
+	UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS		= 1 << 1,
+
+	/*
+	 * If UFS host controller is having issue in processing LCC (Line
+	 * Control Command) coming from device then enable this quirk.
+	 * When this quirk is enabled, host controller driver should disable
+	 * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE
+	 * attribute of device to 0).
+	 */
+	UFSHCD_QUIRK_BROKEN_LCC				= 1 << 2,
+
+	/*
+	 * The attribute PA_RXHSUNTERMCAP specifies whether or not the
+	 * inbound Link supports unterminated line in HS mode. Setting this
+	 * attribute to 1 fixes moving to HS gear.
+	 */
+	UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP		= 1 << 3,
+
+	/*
+	 * This quirk needs to be enabled if the host controller only allows
+	 * accessing the peer dme attributes in AUTO mode (FAST AUTO or
+	 * SLOW AUTO).
+	 */
+	UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE		= 1 << 4,
+
+	/*
+	 * This quirk needs to be enabled if the host controller doesn't
+	 * advertise the correct version in UFS_VER register. If this quirk
+	 * is enabled, standard UFS host driver will call the vendor specific
+	 * ops (get_ufs_hci_version) to get the correct version.
+	 */
+	UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION		= 1 << 5,
+};
+
 /**
  * struct ufs_hba - per adapter private structure
  * @mmio_base: UFSHCI base register address
@@ -573,46 +615,6 @@ struct ufs_hba {
 	bool is_irq_enabled;
 	enum ufs_ref_clk_freq dev_ref_clk_freq;
 
-	/* Interrupt aggregation support is broken */
-	#define UFSHCD_QUIRK_BROKEN_INTR_AGGR			0x1
-
-	/*
-	 * delay before each dme command is required as the unipro
-	 * layer has shown instabilities
-	 */
-	#define UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS		0x2
-
-	/*
-	 * If UFS host controller is having issue in processing LCC (Line
-	 * Control Command) coming from device then enable this quirk.
-	 * When this quirk is enabled, host controller driver should disable
-	 * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE
-	 * attribute of device to 0).
-	 */
-	#define UFSHCD_QUIRK_BROKEN_LCC				0x4
-
-	/*
-	 * The attribute PA_RXHSUNTERMCAP specifies whether or not the
-	 * inbound Link supports unterminated line in HS mode. Setting this
-	 * attribute to 1 fixes moving to HS gear.
-	 */
-	#define UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP		0x8
-
-	/*
-	 * This quirk needs to be enabled if the host contoller only allows
-	 * accessing the peer dme attributes in AUTO mode (FAST AUTO or
-	 * SLOW AUTO).
-	 */
-	#define UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE		0x10
-
-	/*
-	 * This quirk needs to be enabled if the host contoller doesn't
-	 * advertise the correct version in UFS_VER register. If this quirk
-	 * is enabled, standard UFS host driver will call the vendor specific
-	 * ops (get_ufs_hci_version) to get the correct version.
-	 */
-	#define UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION		0x20
-
 	unsigned int quirks;	/* Deviations from standard UFSHCI spec. */
 
 	/* Device deviations from standard UFS device spec. */