Commit c4018fa2 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

[media] dib0700: fix RC support on Hauppauge Nova-TD

The RC support o Nova-TD is broken, as the RC endpoint there
is an interrupt endpoint.

That produces an ugly calltrace at the Kernel logs:

	WARNING: CPU: 2 PID: 56 at drivers/usb/core/urb.c:450 usb_submit_urb+0x1fd/0x5c0()
	usb 1-1.2: BOGUS urb xfer, pipe 3 != type 1
	Modules linked in: rc_dib0700_rc5(OF) dvb_usb_dib0700(OF) dib9000(OF) dib8000(OF) dib7000m(OF) dib0090(OF) dib0070(OF) dib7000p(OF) dib3000mc(OF) dibx000_common(OF) dvb_usb(OF) rc_core(OF) snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi snd_seq snd_seq_device snd_pcm snd_timer snd soundcore bnep bluetooth 6lowpan_iphc rfkill au0828(OF) xc5000(OF) au8522_dig(OF) au8522_common(OF) tveeprom(OF) dvb_core(OF) nouveau i915 mxm_wmi ttm i2c_algo_bit drm_kms_helper drm r8169 mii i2c_core video wmi [last unloaded: au0828]
	CPU: 2 PID: 56 Comm: khubd Tainted: GF          O 3.14.2-200.fc20.x86_64 #1
	Hardware name: SAMSUNG ELECTRONICS CO., LTD. 550P5C/550P7C/SAMSUNG_NP1234567890, BIOS P05ABI.016.130917.dg 09/17/2013
	 0000000000000000 00000000610866bc ffff880223703860 ffffffff816eec92
	 ffff8802237038a8 ffff880223703898 ffffffff8108a1bd ffff8800916a2180
	 ffff8801d5b16000 0000000000000003 0000000000000003 0000000000000020
	Call Trace:
	 [<ffffffff816eec92>] dump_stack+0x45/0x56
	 [<ffffffff8108a1bd>] warn_slowpath_common+0x7d/0xa0
	 [<ffffffff8108a23c>] warn_slowpath_fmt+0x5c/0x80
	 [<ffffffff814e3ebd>] usb_submit_urb+0x1fd/0x5c0
	 [<ffffffffa0445925>] dib0700_rc_setup+0xb5/0x120 [dvb_usb_dib0700]
	 [<ffffffffa0445a58>] dib0700_probe+0xc8/0x130 [dvb_usb_dib0700]
	...

Fix it by detecting if the endpoint is bulk or interrupt.

Tested with both Hauppauge Nova-TD model 52009 (interrupt) and with a
		 Prolink Pixelview SBTVD model PV-D231U (bulk).
Signed-off-by: default avatarMauro Carvalho Chehab <m.chehab@samsung.com>
parent 444f8bda
......@@ -59,7 +59,7 @@ extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8
extern int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3);
extern int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen);
extern int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw);
extern int dib0700_rc_setup(struct dvb_usb_device *d);
extern int dib0700_rc_setup(struct dvb_usb_device *d, struct usb_interface *intf);
extern int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
extern struct i2c_algorithm dib0700_i2c_algo;
extern int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
......
......@@ -754,17 +754,20 @@ static void dib0700_rc_urb_completion(struct urb *purb)
usb_submit_urb(purb, GFP_ATOMIC);
}
int dib0700_rc_setup(struct dvb_usb_device *d)
int dib0700_rc_setup(struct dvb_usb_device *d, struct usb_interface *intf)
{
struct dib0700_state *st = d->priv;
struct urb *purb;
int ret;
const struct usb_endpoint_descriptor *e;
int ret, rc_ep = 1;
unsigned int pipe = 0;
/* Poll-based. Don't initialize bulk mode */
if (st->fw_version < 0x10200)
if (st->fw_version < 0x10200 || !intf)
return 0;
/* Starting in firmware 1.20, the RC info is provided on a bulk pipe */
purb = usb_alloc_urb(0, GFP_KERNEL);
if (purb == NULL) {
err("rc usb alloc urb failed");
......@@ -779,10 +782,36 @@ int dib0700_rc_setup(struct dvb_usb_device *d)
}
purb->status = -EINPROGRESS;
usb_fill_bulk_urb(purb, d->udev, usb_rcvbulkpipe(d->udev, 1),
purb->transfer_buffer, RC_MSG_SIZE_V1_20,
/*
* Some devices like the Hauppauge NovaTD model 52009 use an interrupt
* endpoint, while others use a bulk one.
*/
e = &intf->altsetting[0].endpoint[rc_ep].desc;
if (usb_endpoint_dir_in(e)) {
if (usb_endpoint_xfer_bulk(e)) {
pipe = usb_rcvbulkpipe(d->udev, rc_ep);
usb_fill_bulk_urb(purb, d->udev, pipe,
purb->transfer_buffer,
RC_MSG_SIZE_V1_20,
dib0700_rc_urb_completion, d);
} else if (usb_endpoint_xfer_int(e)) {
pipe = usb_rcvintpipe(d->udev, rc_ep);
usb_fill_int_urb(purb, d->udev, pipe,
purb->transfer_buffer,
RC_MSG_SIZE_V1_20,
dib0700_rc_urb_completion, d, 1);
}
}
if (!pipe) {
err("There's no endpoint for remote controller");
kfree(purb->transfer_buffer);
usb_free_urb(purb);
return 0;
}
ret = usb_submit_urb(purb, GFP_ATOMIC);
if (ret) {
err("rc submit urb failed");
......@@ -820,7 +849,7 @@ static int dib0700_probe(struct usb_interface *intf,
else
dev->props.rc.core.bulk_mode = false;
dib0700_rc_setup(dev);
dib0700_rc_setup(dev, intf);
return 0;
}
......
......@@ -514,7 +514,7 @@ static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
/* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)key[3-2],(int)key[3-3],(int)key[3-1],(int)key[3]); */
dib0700_rc_setup(d); /* reset ir sensor data to prevent false events */
dib0700_rc_setup(d, NULL); /* reset ir sensor data to prevent false events */
d->last_event = 0;
switch (d->props.rc.core.protocol) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment