Commit c46938cc authored by Mark Lord's avatar Mark Lord Committed by Jeff Garzik

sata_mv use hweight16() for bit counting (V2)

Some tidying as suggested by Grant Grundler.

Nuke local bit-counting function from sata_mv in favour of using hweight16().
Also add a short explanation for the 15msec timeout used when waiting for empty/idle.
Signed-off-by: default avatarMark Lord <mlord@pobox.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent 4c299ca3
......@@ -65,6 +65,7 @@
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/mbus.h>
#include <linux/bitops.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
......@@ -903,6 +904,10 @@ static void mv_wait_for_edma_empty_idle(struct ata_port *ap)
/*
* Wait for the EDMA engine to finish transactions in progress.
* No idea what a good "timeout" value might be, but measurements
* indicate that it often requires hundreds of microseconds
* with two drives in-use. So we use the 15msec value above
* as a rough guess at what even more drives might require.
*/
for (i = 0; i < timeout; ++i) {
u32 edma_stat = readl(port_mmio + EDMA_STATUS_OFS);
......@@ -1640,17 +1645,6 @@ static unsigned int mv_get_err_pmp_map(struct ata_port *ap)
return readl(port_mmio + SATA_TESTCTL_OFS) >> 16;
}
static int mv_count_pmp_links(unsigned int pmp_map)
{
unsigned int link_count = 0;
while (pmp_map) {
link_count += (pmp_map & 1);
pmp_map >>= 1;
}
return link_count;
}
static void mv_pmp_eh_prep(struct ata_port *ap, unsigned int pmp_map)
{
struct ata_eh_info *ehi;
......@@ -1701,7 +1695,7 @@ static int mv_handle_fbs_ncq_dev_err(struct ata_port *ap)
pp->delayed_eh_pmp_map = new_map;
mv_pmp_eh_prep(ap, new_map & ~old_map);
}
failed_links = mv_count_pmp_links(new_map);
failed_links = hweight16(new_map);
ata_port_printk(ap, KERN_INFO, "%s: pmp_map=%04x qc_map=%04x "
"failed_links=%d nr_active_links=%d\n",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment