[SCSI] bxn2i: Added support for other TMFs besides ABORT_TASK

Expanded the TMF request routine to support other TMFs such as LUN
RESET, etc.
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Anil Veerabhadrappa <anilgv@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

drivers/scsi/bnx2i/bnx2i_hwi.c

@@ -385,7 +385,6 @@ int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn,
 	struct bnx2i_cmd *bnx2i_cmd;
 	struct bnx2i_tmf_request *tmfabort_wqe;
 	u32 dword;
-	u32 scsi_lun[2];
 
 	bnx2i_cmd = (struct bnx2i_cmd *)mtask->dd_data;
 	tmfabort_hdr = (struct iscsi_tm *)mtask->hdr;
@@ -393,38 +392,41 @@ int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn,
 						bnx2i_conn->ep->qp.sq_prod_qe;
 
 	tmfabort_wqe->op_code = tmfabort_hdr->opcode;
-	tmfabort_wqe->op_attr = 0;
-	tmfabort_wqe->op_attr =
-		ISCSI_TMF_REQUEST_ALWAYS_ONE | ISCSI_TM_FUNC_ABORT_TASK;
+	tmfabort_wqe->op_attr = tmfabort_hdr->flags;
 
 	tmfabort_wqe->itt = (mtask->itt | (ISCSI_TASK_TYPE_MPATH << 14));
 	tmfabort_wqe->reserved2 = 0;
 	tmfabort_wqe->cmd_sn = be32_to_cpu(tmfabort_hdr->cmdsn);
 
+	switch (tmfabort_hdr->flags & ISCSI_FLAG_TM_FUNC_MASK) {
+	case ISCSI_TM_FUNC_ABORT_TASK:
+	case ISCSI_TM_FUNC_TASK_REASSIGN:
 		ctask = iscsi_itt_to_task(conn, tmfabort_hdr->rtt);
 		if (!ctask || !ctask->sc)
 			/*
-		 * the iscsi layer must have completed the cmd while this
+			 * the iscsi layer must have completed the cmd while
 			 * was starting up.
 			 *
-		 * Note: In the case of a SCSI cmd timeout, the task's sc
-		 *       is still active; hence ctask->sc != 0
+			 * Note: In the case of a SCSI cmd timeout, the task's
+			 *       sc is still active; hence ctask->sc != 0
 			 *       In this case, the task must be aborted
 			 */
 			return 0;
 
 		ref_sc = ctask->sc;
-
-	/* Retrieve LUN directly from the ref_sc */
-	int_to_scsilun(ref_sc->device->lun, (struct scsi_lun *) scsi_lun);
-	tmfabort_wqe->lun[0] = be32_to_cpu(scsi_lun[0]);
-	tmfabort_wqe->lun[1] = be32_to_cpu(scsi_lun[1]);
-
 		if (ref_sc->sc_data_direction == DMA_TO_DEVICE)
-		dword = (ISCSI_TASK_TYPE_WRITE << ISCSI_CMD_REQUEST_TYPE_SHIFT);
+			dword = (ISCSI_TASK_TYPE_WRITE <<
+				 ISCSI_CMD_REQUEST_TYPE_SHIFT);
 		else
-		dword = (ISCSI_TASK_TYPE_READ << ISCSI_CMD_REQUEST_TYPE_SHIFT);
-	tmfabort_wqe->ref_itt = (dword | (tmfabort_hdr->rtt & ISCSI_ITT_MASK));
+			dword = (ISCSI_TASK_TYPE_READ <<
+				 ISCSI_CMD_REQUEST_TYPE_SHIFT);
+		tmfabort_wqe->ref_itt = (dword |
+					(tmfabort_hdr->rtt & ISCSI_ITT_MASK));
+		break;
+	default:
+		tmfabort_wqe->ref_itt = RESERVED_ITT;
+	}
+	memcpy(tmfabort_wqe->lun, tmfabort_hdr->lun, sizeof(struct scsi_lun));
 	tmfabort_wqe->ref_cmd_sn = be32_to_cpu(tmfabort_hdr->refcmdsn);
 
 	tmfabort_wqe->bd_list_addr_lo = (u32) bnx2i_conn->hba->mp_bd_dma;