Commit c6538de8 authored by Archit Taneja's avatar Archit Taneja Committed by Rob Clark

drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY

Add DSI PLL common clock framework clocks for 8960 PHY.

The PLL here is different from the ones found in B family msm chips. As
before, the DSI provides two clocks to the outside world. dsixpll and
dsixpllbyte (x = 1, 2). dsixpll is a regular clock divider, but
dsixpllbyte is modelled as a custom clock divider.

dsixpllbyte is the starting point of the PLL configuration. It is the
one that sets up the VCO clock rate. We need the VCO clock rate in the
form: F * byteclk, where F is a multiplication factor that varies on
the byte clock the DSI driver is trying to set. We use the custom
clk_ops for dsixpllbyte to ensure that the parent (VCO) is set at this
rate.

An additional divider (POSTDIV1) generates the bitclk. Since bit clock
can be derived from byteclock, we calculate it internally, and don't
expose it as a clock.

Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: default avatarArchit Taneja <architt@codeaurora.org>
Signed-off-by: default avatarRob Clark <robdclark@gmail.com>
parent 225380b3
......@@ -68,6 +68,7 @@ msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/phy/dsi_phy_28nm_8960.o
ifeq ($(CONFIG_DRM_MSM_DSI_PLL),y)
msm-y += dsi/pll/dsi_pll.o
msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/pll/dsi_pll_28nm.o
msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/pll/dsi_pll_28nm_8960.o
endif
obj-$(CONFIG_DRM_MSM) += msm.o
......@@ -151,6 +151,9 @@ struct msm_dsi_pll *msm_dsi_pll_init(struct platform_device *pdev,
case MSM_DSI_PHY_28NM_LP:
pll = msm_dsi_pll_28nm_init(pdev, type, id);
break;
case MSM_DSI_PHY_28NM_8960:
pll = msm_dsi_pll_28nm_8960_init(pdev, id);
break;
default:
pll = ERR_PTR(-ENXIO);
break;
......
......@@ -93,6 +93,16 @@ static inline struct msm_dsi_pll *msm_dsi_pll_28nm_init(
return ERR_PTR(-ENODEV);
}
#endif
#ifdef CONFIG_DRM_MSM_DSI_28NM_8960_PHY
struct msm_dsi_pll *msm_dsi_pll_28nm_8960_init(struct platform_device *pdev,
int id);
#else
struct msm_dsi_pll *msm_dsi_pll_28nm_8960_init(struct platform_device *pdev,
int id)
{
return ERR_PTR(-ENODEV);
}
#endif
#endif /* __DSI_PLL_H__ */
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment