Skip to content

L
linux
Commit c6ad1158 authored by Ben Dooks's avatar Ben Dooks
Browse files
Options

Merge branch 'next-s3c24xx' into next-merged

parents 1d19fdba 28ab44c5
Show whitespace changes
Inline Side-by-side
Showing with 1800 additions and 765 deletions
arch/arm/mach-s3c2410/Kconfig
View file @ c6ad1158
......@@ -33,11 +33,6 @@ config S3C2410_GPIO
help
GPIO code for S3C2410 and similar processors
config S3C2410_CLOCK
bool
help
Clock code for the S3C2410, and similar processors
config SIMTEC_NOR
bool
help
......@@ -85,6 +80,7 @@ config ARCH_BAST
select PM_SIMTEC if PM
select SIMTEC_NOR
select MACH_BAST_IDE
select S3C24XX_DCLK
select ISA
help
Say Y here if you are using the Simtec Electronics EB2410ITX
......@@ -122,6 +118,7 @@ config MACH_TCT_HAMMER
config MACH_VR1000
bool "Thorcom VR1000"
select PM_SIMTEC if PM
select S3C24XX_DCLK
select SIMTEC_NOR
select MACH_BAST_IDE
select CPU_S3C2410
......
arch/arm/mach-s3c2410/Makefile
View file @ c6ad1158
......@@ -15,7 +15,6 @@ obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o
obj-$(CONFIG_S3C2410_GPIO) += gpio.o
obj-$(CONFIG_S3C2410_CLOCK) += clock.o
# Machine support
......
arch/arm/mach-s3c2410/include/mach/regs-clock.h
View file @ c6ad1158
......@@ -42,13 +42,6 @@
#define S3C2410_CLKCON_IIS (1<<17)
#define S3C2410_CLKCON_SPI (1<<18)
#define S3C2410_PLLCON_MDIVSHIFT 12
#define S3C2410_PLLCON_PDIVSHIFT 4
#define S3C2410_PLLCON_SDIVSHIFT 0
#define S3C2410_PLLCON_MDIVMASK ((1<<(1+(19-12)))-1)
#define S3C2410_PLLCON_PDIVMASK ((1<<5)-1)
#define S3C2410_PLLCON_SDIVMASK 3
/* DCLKCON register addresses in gpio.h */
#define S3C2410_DCLKCON_DCLK0EN (1<<0)
......@@ -76,32 +69,6 @@
#define S3C2410_CLKSLOW_SLOWVAL(x) (x)
#define S3C2410_CLKSLOW_GET_SLOWVAL(x) ((x) & 7)
#ifndef __ASSEMBLY__
#include <asm/div64.h>
static inline unsigned int
s3c2410_get_pll(unsigned int pllval, unsigned int baseclk)
{
unsigned int mdiv, pdiv, sdiv;
uint64_t fvco;
mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT;
pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT;
sdiv = pllval >> S3C2410_PLLCON_SDIVSHIFT;
mdiv &= S3C2410_PLLCON_MDIVMASK;
pdiv &= S3C2410_PLLCON_PDIVMASK;
sdiv &= S3C2410_PLLCON_SDIVMASK;
fvco = (uint64_t)baseclk * (mdiv + 8);
do_div(fvco, (pdiv + 2) << sdiv);
return (unsigned int)fvco;
}
#endif /* __ASSEMBLY__ */
#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
/* extra registers */
......
arch/arm/mach-s3c2410/include/mach/regs-gpio.h
View file @ c6ad1158
......@@ -1053,13 +1053,6 @@
#define S3C24XX_EXTINT1 S3C24XX_GPIOREG2(0x8C)
#define S3C24XX_EXTINT2 S3C24XX_GPIOREG2(0x90)
/* values for S3C2410_EXTINT0/1/2 */
#define S3C2410_EXTINT_LOWLEV (0x00)
#define S3C2410_EXTINT_HILEV (0x01)
#define S3C2410_EXTINT_FALLEDGE (0x02)
#define S3C2410_EXTINT_RISEEDGE (0x04)
#define S3C2410_EXTINT_BOTHEDGE (0x06)
/* interrupt filtering conrrol for EINT16..EINT23 */
#define S3C2410_EINFLT0 S3C2410_GPIOREG(0x94)
#define S3C2410_EINFLT1 S3C2410_GPIOREG(0x98)
......
arch/arm/mach-s3c2410/include/mach/spi.h
View file @ c6ad1158
......@@ -22,5 +22,12 @@ struct s3c2410_spi_info {
void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
};
/* Standard setup / suspend routines for SPI GPIO pins. */
extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
int enable);
extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
int enable);
#endif /* __ASM_ARCH_SPI_H */
arch/arm/mach-s3c2410/mach-h1940.c
View file @ c6ad1158
......@@ -43,6 +43,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pll.h>
#include <plat/pm.h>
static struct map_desc h1940_iodesc[] __initdata = {
......@@ -223,10 +224,9 @@ static void __init h1940_init(void)
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
tmp = (
0x78 << S3C2410_PLLCON_MDIVSHIFT)
| (0x02 << S3C2410_PLLCON_PDIVSHIFT)
| (0x03 << S3C2410_PLLCON_SDIVSHIFT);
tmp = (0x78 << S3C24XX_PLLCON_MDIVSHIFT)
| (0x02 << S3C24XX_PLLCON_PDIVSHIFT)
| (0x03 << S3C24XX_PLLCON_SDIVSHIFT);
writel(tmp, S3C2410_UPLLCON);
platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
......
arch/arm/mach-s3c2410/s3c2410.c
View file @ c6ad1158
......@@ -16,6 +16,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
......@@ -28,6 +29,8 @@
#include <mach/hardware.h>
#include <asm/irq.h>
#include <plat/cpu-freq.h>
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
......@@ -35,6 +38,7 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/pll.h>
/* Initial IO mappings */
......@@ -59,25 +63,28 @@ void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no)
* machine specific initialisation.
*/
void __init s3c2410_map_io(struct map_desc *mach_desc, int mach_size)
void __init s3c2410_map_io(void)
{
/* register our io-tables */
iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
iotable_init(mach_desc, mach_size);
}
void __init s3c2410_init_clocks(int xtal)
void __init_or_cpufreq s3c2410_setup_clocks(void)
{
struct clk *xtal_clk;
unsigned long tmp;
unsigned long xtal;
unsigned long fclk;
unsigned long hclk;
unsigned long pclk;
xtal_clk = clk_get(NULL, "xtal");
xtal = clk_get_rate(xtal_clk);
clk_put(xtal_clk);
/* now we've got our machine bits initialised, work out what
* clocks we've got */
fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
tmp = __raw_readl(S3C2410_CLKDIVN);
......@@ -95,7 +102,13 @@ void __init s3c2410_init_clocks(int xtal)
* console to use them
*/
s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
s3c24xx_setup_clocks(fclk, hclk, pclk);
}
void __init s3c2410_init_clocks(int xtal)
{
s3c24xx_register_baseclocks(xtal);
s3c2410_setup_clocks();
s3c2410_baseclk_add();
}
......
arch/arm/mach-s3c2412/s3c2412.c
View file @ c6ad1158
......@@ -16,6 +16,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
......@@ -33,6 +34,8 @@
#include <mach/reset.h>
#include <mach/idle.h>
#include <plat/cpu-freq.h>
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
#include <mach/regs-power.h>
......@@ -47,6 +50,7 @@
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/pm.h>
#include <plat/pll.h>
#ifndef CONFIG_CPU_S3C2412_ONLY
void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
......@@ -136,7 +140,7 @@ static void s3c2412_hard_reset(void)
* machine specific initialisation.
*/
void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size)
void __init s3c2412_map_io(void)
{
/* move base of IO */
......@@ -153,20 +157,25 @@ void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size)
/* register our io-tables */
iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
iotable_init(mach_desc, mach_size);
}
void __init s3c2412_init_clocks(int xtal)
void __init_or_cpufreq s3c2412_setup_clocks(void)
{
struct clk *xtal_clk;
unsigned long tmp;
unsigned long xtal;
unsigned long fclk;
unsigned long hclk;
unsigned long pclk;
xtal_clk = clk_get(NULL, "xtal");
xtal = clk_get_rate(xtal_clk);
clk_put(xtal_clk);
/* now we've got our machine bits initialised, work out what
* clocks we've got */
fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal*2);
fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2);
clk_mpll.rate = fclk;
......@@ -183,11 +192,17 @@ void __init s3c2412_init_clocks(int xtal)
printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
s3c24xx_setup_clocks(fclk, hclk, pclk);
}
void __init s3c2412_init_clocks(int xtal)
{
/* initialise the clocks here, to allow other things like the
* console to use them
*/
s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
s3c24xx_register_baseclocks(xtal);
s3c2412_setup_clocks();
s3c2412_baseclk_add();
}
......
arch/arm/mach-s3c2440/Kconfig
View file @ c6ad1158
......@@ -29,6 +29,7 @@ menu "S3C2440 Machines"
config MACH_ANUBIS
bool "Simtec Electronics ANUBIS"
select CPU_S3C2440
select S3C24XX_DCLK
select PM_SIMTEC if PM
select HAVE_PATA_PLATFORM
select S3C24XX_GPIO_EXTRA64
......@@ -39,6 +40,7 @@ config MACH_ANUBIS
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
select CPU_S3C2440
select S3C24XX_DCLK
select PM_SIMTEC if PM
select S3C24XX_GPIO_EXTRA128
help
......
arch/arm/mach-s3c2443/clock.c
View file @ c6ad1158
......@@ -39,6 +39,8 @@
#include <mach/regs-s3c2443-clock.h>
#include <plat/cpu-freq.h>
#include <plat/s3c2443.h>
#include <plat/clock.h>
#include <plat/cpu.h>
......@@ -1011,22 +1013,20 @@ static struct clk *clks[] __initdata = {
&clk_prediv,
};
void __init s3c2443_init_clocks(int xtal)
void __init_or_cpufreq s3c2443_setup_clocks(void)
{
unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
struct clk *xtal_clk;
unsigned long xtal;
unsigned long pll;
unsigned long fclk;
unsigned long hclk;
unsigned long pclk;
struct clk *clkp;
int ret;
int ptr;
/* s3c2443 parents h and p clocks from prediv */
clk_h.parent = &clk_prediv;
clk_p.parent = &clk_prediv;
xtal_clk = clk_get(NULL, "xtal");
xtal = clk_get_rate(xtal_clk);
clk_put(xtal_clk);
pll = s3c2443_get_mpll(mpllcon, xtal);
clk_msysclk.rate = pll;
......@@ -1036,13 +1036,29 @@ void __init s3c2443_init_clocks(int xtal)
hclk /= s3c2443_get_hdiv(clkdiv0);
pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
s3c24xx_setup_clocks(fclk, hclk, pclk);
printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
(mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
print_mhz(pll), print_mhz(fclk),
print_mhz(hclk), print_mhz(pclk));
s3c24xx_setup_clocks(fclk, hclk, pclk);
}
void __init s3c2443_init_clocks(int xtal)
{
struct clk *clkp;
unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
int ret;
int ptr;
/* s3c2443 parents h and p clocks from prediv */
clk_h.parent = &clk_prediv;
clk_p.parent = &clk_prediv;
s3c24xx_register_baseclocks(xtal);
s3c2443_setup_clocks();
s3c2443_clk_initparents();
for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
......@@ -1056,7 +1072,6 @@ void __init s3c2443_init_clocks(int xtal)
}
clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
clk_usb_bus.parent = &clk_usb_bus_host;
/* ensure usb bus clock is within correct rate of 48MHz */
......
arch/arm/mach-s3c2443/s3c2443.c
View file @ c6ad1158
......@@ -81,10 +81,9 @@ void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
* machine specific initialisation.
*/
void __init s3c2443_map_io(struct map_desc *mach_desc, int mach_size)
void __init s3c2443_map_io(void)
{
iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
iotable_init(mach_desc, mach_size);
}
/* need to register class before we actually register the device, and
......
arch/arm/plat-s3c/Kconfig
View file @ c6ad1158
......@@ -57,6 +57,14 @@ config S3C_BOOT_ERROR_RESET
Say y here to use the watchdog to reset the system if the
kernel decompressor detects an error during decompression.
config S3C_BOOT_UART_FORCE_FIFO
bool "Force UART FIFO on during boot process"
depends on PLAT_S3C
default y
help
Say Y here to force the UART FIFOs on during the kernel
uncompressor
comment "Power management"
config S3C2410_PM_DEBUG
......
arch/arm/plat-s3c/Makefile
View file @ c6ad1158
# dummy makefile, currently just including asm/arm/plat-s3c/include/plat
# arch/arm/plat-s3c/Makefile
#
# Copyright 2008 Simtec Electronics
#
# Licensed under GPLv2
obj-n := dummy.o
obj-y :=
obj-m :=
obj-n :=
obj- :=
# Core support for all Samsung SoCs
obj-y += init.o
obj-y += time.o
obj-y += clock.o
obj-y += pwm-clock.o
\ No newline at end of file
arch/arm/plat-s3c/clock.c 0 → 100644
View file @ c6ad1158
/* linux/arch/arm/plat-s3c24xx/clock.c
*
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C24XX Core clock control support
*
* Based on, and code from linux/arch/arm/mach-versatile/clock.c
**
** Copyright (C) 2004 ARM Limited.
** Written by Deep Blue Solutions Limited.
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/clk.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <plat/cpu-freq.h>
#include <plat/clock.h>
#include <plat/cpu.h>
/* clock information */
static LIST_HEAD(clocks);
/* We originally used an mutex here, but some contexts (see resume)
* are calling functions such as clk_set_parent() with IRQs disabled
* causing an BUG to be triggered.
*/
DEFINE_SPINLOCK(clocks_lock);
/* enable and disable calls for use with the clk struct */
static int clk_null_enable(struct clk *clk, int enable)
{
return 0;
}
/* Clock API calls */
struct clk *clk_get(struct device *dev, const char *id)
{
struct clk *p;
struct clk *clk = ERR_PTR(-ENOENT);
int idno;
if (dev == NULL || dev->bus != &platform_bus_type)
idno = -1;
else
idno = to_platform_device(dev)->id;
spin_lock(&clocks_lock);
list_for_each_entry(p, &clocks, list) {
if (p->id == idno &&
strcmp(id, p->name) == 0 &&
try_module_get(p->owner)) {
clk = p;
break;
}
}
/* check for the case where a device was supplied, but the
* clock that was being searched for is not device specific */
if (IS_ERR(clk)) {
list_for_each_entry(p, &clocks, list) {
if (p->id == -1 && strcmp(id, p->name) == 0 &&
try_module_get(p->owner)) {
clk = p;
break;
}
}
}
spin_unlock(&clocks_lock);
return clk;
}
void clk_put(struct clk *clk)
{
module_put(clk->owner);
}
int clk_enable(struct clk *clk)
{
if (IS_ERR(clk) || clk == NULL)
return -EINVAL;
clk_enable(clk->parent);
spin_lock(&clocks_lock);
if ((clk->usage++) == 0)
(clk->enable)(clk, 1);
spin_unlock(&clocks_lock);
return 0;
}
void clk_disable(struct clk *clk)
{
if (IS_ERR(clk) || clk == NULL)
return;
spin_lock(&clocks_lock);
if ((--clk->usage) == 0)
(clk->enable)(clk, 0);
spin_unlock(&clocks_lock);
clk_disable(clk->parent);
}
unsigned long clk_get_rate(struct clk *clk)
{
if (IS_ERR(clk))
return 0;
if (clk->rate != 0)
return clk->rate;
if (clk->get_rate != NULL)
return (clk->get_rate)(clk);
if (clk->parent != NULL)
return clk_get_rate(clk->parent);
return clk->rate;
}
long clk_round_rate(struct clk *clk, unsigned long rate)
{
if (!IS_ERR(clk) && clk->round_rate)
return (clk->round_rate)(clk, rate);
return rate;
}
int clk_set_rate(struct clk *clk, unsigned long rate)
{
int ret;
if (IS_ERR(clk))
return -EINVAL;
/* We do not default just do a clk->rate = rate as
* the clock may have been made this way by choice.
*/
WARN_ON(clk->set_rate == NULL);
if (clk->set_rate == NULL)
return -EINVAL;
spin_lock(&clocks_lock);
ret = (clk->set_rate)(clk, rate);
spin_unlock(&clocks_lock);
return ret;
}
struct clk *clk_get_parent(struct clk *clk)
{
return clk->parent;
}
int clk_set_parent(struct clk *clk, struct clk *parent)
{
int ret = 0;
if (IS_ERR(clk))
return -EINVAL;
spin_lock(&clocks_lock);
if (clk->set_parent)
ret = (clk->set_parent)(clk, parent);
spin_unlock(&clocks_lock);
return ret;
}
EXPORT_SYMBOL(clk_get);
EXPORT_SYMBOL(clk_put);
EXPORT_SYMBOL(clk_enable);
EXPORT_SYMBOL(clk_disable);
EXPORT_SYMBOL(clk_get_rate);
EXPORT_SYMBOL(clk_round_rate);
EXPORT_SYMBOL(clk_set_rate);
EXPORT_SYMBOL(clk_get_parent);
EXPORT_SYMBOL(clk_set_parent);
/* base clocks */
static int clk_default_setrate(struct clk *clk, unsigned long rate)
{
clk->rate = rate;
return 0;
}
struct clk clk_xtal = {
.name = "xtal",
.id = -1,
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
};
struct clk clk_mpll = {
.name = "mpll",
.id = -1,
.set_rate = clk_default_setrate,
};
struct clk clk_upll = {
.name = "upll",
.id = -1,
.parent = NULL,
.ctrlbit = 0,
};
struct clk clk_f = {
.name = "fclk",
.id = -1,
.rate = 0,
.parent = &clk_mpll,
.ctrlbit = 0,
.set_rate = clk_default_setrate,
};
struct clk clk_h = {
.name = "hclk",
.id = -1,
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
.set_rate = clk_default_setrate,
};
struct clk clk_p = {
.name = "pclk",
.id = -1,
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
.set_rate = clk_default_setrate,
};
struct clk clk_usb_bus = {
.name = "usb-bus",
.id = -1,
.rate = 0,
.parent = &clk_upll,
};
struct clk s3c24xx_uclk = {
.name = "uclk",
.id = -1,
};
/* initialise the clock system */
int s3c24xx_register_clock(struct clk *clk)
{
clk->owner = THIS_MODULE;
if (clk->enable == NULL)
clk->enable = clk_null_enable;
/* add to the list of available clocks */
/* Quick check to see if this clock has already been registered. */
BUG_ON(clk->list.prev != clk->list.next);
spin_lock(&clocks_lock);
list_add(&clk->list, &clocks);
spin_unlock(&clocks_lock);
return 0;
}
int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
{
int fails = 0;
for (; nr_clks > 0; nr_clks--, clks++) {
if (s3c24xx_register_clock(*clks) < 0)
fails++;
}
return fails;
}
/* initalise all the clocks */
int __init s3c24xx_register_baseclocks(unsigned long xtal)
{
printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
clk_xtal.rate = xtal;
/* register our clocks */
if (s3c24xx_register_clock(&clk_xtal) < 0)
printk(KERN_ERR "failed to register master xtal\n");
if (s3c24xx_register_clock(&clk_mpll) < 0)
printk(KERN_ERR "failed to register mpll clock\n");
if (s3c24xx_register_clock(&clk_upll) < 0)
printk(KERN_ERR "failed to register upll clock\n");
if (s3c24xx_register_clock(&clk_f) < 0)
printk(KERN_ERR "failed to register cpu fclk\n");
if (s3c24xx_register_clock(&clk_h) < 0)
printk(KERN_ERR "failed to register cpu hclk\n");
if (s3c24xx_register_clock(&clk_p) < 0)
printk(KERN_ERR "failed to register cpu pclk\n");
return 0;
}
arch/arm/plat-s3c/include/mach/io.h 0 → 100644
View file @ c6ad1158
/* arch/arm/plat-s3c/include/mach/io.h
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben-linux@fluff.org>
*
* Default IO routines for plat-s3c based systems, such as S3C24A0
*/
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
/* No current ISA/PCI bus support. */
#define __io(a) ((void __iomem *)(a))
#define __mem_pci(a) (a)
#define IO_SPACE_LIMIT (0xFFFFFFFF)
#endif
arch/arm/mach-s3c2410/include/mach/vmalloc.h → arch/arm/plat-s3c/include/mach/vmalloc.h
View file @ c6ad1158
/* arch/arm/mach-s3c2410/include/mach/vmalloc.h
/* arch/arm/plat-s3c/include/mach/vmalloc.h
*
* from arch/arm/mach-iop3xx/include/mach/vmalloc.h
*
......
arch/arm/plat-s3c/include/plat/adc.h 0 → 100644
View file @ c6ad1158
/* arch/arm/plat-s3c/include/plat/adc.h
*
* Copyright (c) 2008 Simtec Electronics
* http://armlinux.simnte.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C24XX ADC driver information
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_PLAT_ADC_H
#define __ASM_PLAT_ADC_H __FILE__
struct s3c_adc_client;
extern int s3c_adc_start(struct s3c_adc_client *client,
unsigned int channel, unsigned int nr_samples);
extern struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
void (*select)(unsigned selected),
void (*conv)(unsigned d0, unsigned d1),
unsigned int is_ts);
extern void s3c_adc_release(struct s3c_adc_client *client);
#endif /* __ASM_PLAT_ADC_H */
arch/arm/plat-s3c24xx/include/plat/clock.h → arch/arm/plat-s3c/include/plat/clock.h
View file @ c6ad1158
/* linux/include/asm-arm/plat-s3c24xx/clock.h
* linux/arch/arm/mach-s3c2410/clock.h
/* linux/arch/arm/plat-s3c/include/plat/clock.h
*
* Copyright (c) 2004-2005 Simtec Electronics
* http://www.simtec.co.uk/products/SWLINUX/
......@@ -10,6 +9,8 @@
* published by the Free Software Foundation.
*/
#include <linux/spinlock.h>
struct clk {
struct list_head list;
struct module *owner;
......@@ -51,14 +52,21 @@ extern struct clk clk_xtal;
* Please DO NOT use these outside of arch/arm/mach-s3c2410
*/
extern struct mutex clocks_mutex;
extern spinlock_t clocks_lock;
extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
extern int s3c24xx_register_clock(struct clk *clk);
extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
extern int s3c24xx_setup_clocks(unsigned long xtal,
unsigned long fclk,
extern int s3c24xx_register_baseclocks(unsigned long xtal);
extern void s3c24xx_setup_clocks(unsigned long fclk,
unsigned long hclk,
unsigned long pclk);
extern void s3c2410_setup_clocks(void);
extern void s3c2412_setup_clocks(void);
extern void s3c244x_setup_clocks(void);
extern void s3c2443_setup_clocks(void);
arch/arm/plat-s3c/include/plat/cpu-freq.h 0 → 100644
View file @ c6ad1158
/* arch/arm/plat-s3c/include/plat/cpu-freq.h
*
* Copyright (c) 2006,2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C CPU frequency scaling support - driver and board
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/cpufreq.h>
struct s3c_cpufreq_info;
struct s3c_cpufreq_board;
struct s3c_iotimings;
struct s3c_freq {
unsigned long fclk;
unsigned long armclk;
unsigned long hclk_tns; /* in 10ths of ns */
unsigned long hclk;
unsigned long pclk;
};
/* wrapper 'struct cpufreq_freqs' so that any drivers receiving the
* notification can use this information that is not provided by just
* having the core frequency alone.
*/
struct s3c_cpufreq_freqs {
struct cpufreq_freqs freqs;
struct s3c_freq old;
struct s3c_freq new;
};
#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs)
struct s3c_clkdivs {
int p_divisor; /* fclk / pclk */
int h_divisor; /* fclk / hclk */
int arm_divisor; /* not all cpus have this. */
unsigned char dvs; /* using dvs mode to arm. */
};
#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s))
struct s3c_pllval {
unsigned long freq;
unsigned long pll_reg;
};
struct s3c_cpufreq_config {
struct s3c_freq freq;
struct s3c_pllval pll;
struct s3c_clkdivs divs;
struct s3c_cpufreq_info *info; /* for core, not drivers */
struct s3c_cpufreq_board *board;
};
/* s3c_cpufreq_board
*
* per-board configuraton information, such as memory refresh and
* how to initialise IO timings.
*/
struct s3c_cpufreq_board {
unsigned int refresh; /* refresh period in ns */
unsigned int auto_io:1; /* automatically init io timings. */
unsigned int need_io:1; /* set if needs io timing support. */
/* any non-zero field in here is taken as an upper limit. */
struct s3c_freq max; /* frequency limits */
};
/* Things depending on frequency scaling. */
#ifdef CONFIG_CPU_FREQ_S3C
#define __init_or_cpufreq
#else
#define __init_or_cpufreq __init
#endif
/* Board functions */
#ifdef CONFIG_CPU_FREQ_S3C
extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board);
#else
static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
{
return 0;
}
#endif /* CONFIG_CPU_FREQ_S3C */
arch/arm/plat-s3c24xx/include/plat/cpu.h → arch/arm/plat-s3c/include/plat/cpu.h
View file @ c6ad1158
/* linux/include/asm-arm/plat-s3c24xx/cpu.h
/* linux/arch/arm/plat-s3c/include/plat/cpu.h
*
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
......@@ -18,7 +18,7 @@
#define MHZ (1000*1000)
#endif
#define print_mhz(m) ((m) / MHZ), ((m / 1000) % 1000)
#define print_mhz(m) ((m) / MHZ), (((m) / 1000) % 1000)
/* forward declaration */
struct s3c24xx_uart_resources;
......@@ -26,6 +26,21 @@ struct platform_device;
struct s3c2410_uartcfg;
struct map_desc;
/* per-cpu initialisation function table. */
struct cpu_table {
unsigned long idcode;
unsigned long idmask;
void (*map_io)(void);
void (*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
void (*init_clocks)(int xtal);
int (*init)(void);
const char *name;
};
extern void s3c_init_cpu(unsigned long idcode,
struct cpu_table *cpus, unsigned int cputab_size);
/* core initialisation functions */
extern void s3c24xx_init_irq(void);
......
arch/arm/plat-s3c/include/plat/regs-irqtype.h 0 → 100644
View file @ c6ad1158
/* arch/arm/plat-s3c/include/plat/regs-irqtype.h
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C - IRQ detection types.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/* values for S3C2410_EXTINT0/1/2 and other cpus in the series, including
* the S3C64XX
*/
#define S3C2410_EXTINT_LOWLEV (0x00)
#define S3C2410_EXTINT_HILEV (0x01)
#define S3C2410_EXTINT_FALLEDGE (0x02)
#define S3C2410_EXTINT_RISEEDGE (0x04)
#define S3C2410_EXTINT_BOTHEDGE (0x06)
arch/arm/plat-s3c/include/plat/uncompress.h
View file @ c6ad1158
......@@ -139,6 +139,28 @@ static void arch_decomp_error(const char *x)
static void error(char *err);
#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
static inline void arch_enable_uart_fifo(void)
{
u32 fifocon = uart_rd(S3C2410_UFCON);
if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
fifocon |= S3C2410_UFCON_RESETBOTH;
uart_wr(S3C2410_UFCON, fifocon);
/* wait for fifo reset to complete */
while (1) {
fifocon = uart_rd(S3C2410_UFCON);
if (!(fifocon & S3C2410_UFCON_RESETBOTH))
break;
}
}
}
#else
#define arch_enable_uart_fifo() do { } while(0)
#endif
static void
arch_decomp_setup(void)
{
......@@ -149,6 +171,12 @@ arch_decomp_setup(void)
arch_detect_cpu();
arch_decomp_wdog_start();
/* Enable the UART FIFOs if they where not enabled and our
* configuration says we should turn them on.
*/
arch_enable_uart_fifo();
}
......
arch/arm/plat-s3c/init.c 0 → 100644
View file @ c6ad1158
/* linux/arch/arm/plat-s3c/init.c
*
* Copyright (c) 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C series CPU initialisation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <mach/hardware.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/regs-serial.h>
static struct cpu_table *cpu;
static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
struct cpu_table *tab,
unsigned int count)
{
for (; count != 0; count--, tab++) {
if ((idcode & tab->idmask) == tab->idcode)
return tab;
}
return NULL;
}
void __init s3c_init_cpu(unsigned long idcode,
struct cpu_table *cputab, unsigned int cputab_size)
{
cpu = s3c_lookup_cpu(idcode, cputab, cputab_size);
if (cpu == NULL) {
printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode);
panic("Unknown S3C24XX CPU");
}
printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
if (cpu->map_io == NULL || cpu->init == NULL) {
printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
panic("Unsupported Samsung CPU");
}
cpu->map_io();
}
/* s3c24xx_init_clocks
*
* Initialise the clock subsystem and associated information from the
* given master crystal value.
*
* xtal = 0 -> use default PLL crystal value (normally 12MHz)
* != 0 -> PLL crystal value in Hz
*/
void __init s3c24xx_init_clocks(int xtal)
{
if (xtal == 0)
xtal = 12*1000*1000;
if (cpu == NULL)
panic("s3c24xx_init_clocks: no cpu setup?\n");
if (cpu->init_clocks == NULL)
panic("s3c24xx_init_clocks: cpu has no clock init\n");
else
(cpu->init_clocks)(xtal);
}
/* uart management */
static int nr_uarts __initdata = 0;
static struct s3c2410_uartcfg uart_cfgs[3];
/* s3c24xx_init_uartdevs
*
* copy the specified platform data and configuration into our central
* set of devices, before the data is thrown away after the init process.
*
* This also fills in the array passed to the serial driver for the
* early initialisation of the console.
*/
void __init s3c24xx_init_uartdevs(char *name,
struct s3c24xx_uart_resources *res,
struct s3c2410_uartcfg *cfg, int no)
{
struct platform_device *platdev;
struct s3c2410_uartcfg *cfgptr = uart_cfgs;
struct s3c24xx_uart_resources *resp;
int uart;
memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no);
for (uart = 0; uart < no; uart++, cfg++, cfgptr++) {
platdev = s3c24xx_uart_src[cfgptr->hwport];
resp = res + cfgptr->hwport;
s3c24xx_uart_devs[uart] = platdev;
platdev->name = name;
platdev->resource = resp->resources;
platdev->num_resources = resp->nr_resources;
platdev->dev.platform_data = cfgptr;
}
nr_uarts = no;
}
void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
if (cpu == NULL)
return;
if (cpu->init_uarts == NULL) {
printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
} else
(cpu->init_uarts)(cfg, no);
}
static int __init s3c_arch_init(void)
{
int ret;
// do the correct init for cpu
if (cpu == NULL)
panic("s3c_arch_init: NULL cpu\n");
ret = (cpu->init)();
if (ret != 0)
return ret;
ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
return ret;
}
arch_initcall(s3c_arch_init);
arch/arm/plat-s3c24xx/pwm-clock.c → arch/arm/plat-s3c/pwm-clock.c
View file @ c6ad1158
......@@ -73,11 +73,13 @@
* tclk -------------------------/
*/
static unsigned long clk_pwm_scaler_getrate(struct clk *clk)
static struct clk clk_timer_scaler[];
static unsigned long clk_pwm_scaler_get_rate(struct clk *clk)
{
unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0);
if (clk->id == 1) {
if (clk == &clk_timer_scaler[1]) {
tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK;
tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT;
} else {
......@@ -87,18 +89,61 @@ static unsigned long clk_pwm_scaler_getrate(struct clk *clk)
return clk_get_rate(clk->parent) / (tcfg0 + 1);
}
/* TODO - add set rate calls. */
static unsigned long clk_pwm_scaler_round_rate(struct clk *clk,
unsigned long rate)
{
unsigned long parent_rate = clk_get_rate(clk->parent);
unsigned long divisor = parent_rate / rate;
if (divisor > 256)
divisor = 256;
else if (divisor < 2)
divisor = 2;
return parent_rate / divisor;
}
static int clk_pwm_scaler_set_rate(struct clk *clk, unsigned long rate)
{
unsigned long round = clk_pwm_scaler_round_rate(clk, rate);
unsigned long tcfg0;
unsigned long divisor;
unsigned long flags;
divisor = clk_get_rate(clk->parent) / round;
divisor--;
local_irq_save(flags);
tcfg0 = __raw_readl(S3C2410_TCFG0);
if (clk == &clk_timer_scaler[1]) {
tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
tcfg0 |= divisor << S3C2410_TCFG_PRESCALER1_SHIFT;
} else {
tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK;
tcfg0 |= divisor;
}
__raw_writel(tcfg0, S3C2410_TCFG0);
local_irq_restore(flags);
return 0;
}
static struct clk clk_timer_scaler[] = {
[0] = {
.name = "pwm-scaler0",
.id = -1,
.get_rate = clk_pwm_scaler_getrate,
.get_rate = clk_pwm_scaler_get_rate,
.set_rate = clk_pwm_scaler_set_rate,
.round_rate = clk_pwm_scaler_round_rate,
},
[1] = {
.name = "pwm-scaler1",
.id = -1,
.get_rate = clk_pwm_scaler_getrate,
.get_rate = clk_pwm_scaler_get_rate,
.set_rate = clk_pwm_scaler_set_rate,
.round_rate = clk_pwm_scaler_round_rate,
},
};
......
arch/arm/plat-s3c24xx/time.c → arch/arm/plat-s3c/time.c
View file @ c6ad1158
......@@ -144,7 +144,7 @@ static struct irqaction s3c2410_timer_irq = {
machine_is_bast() || \
machine_is_vr1000() || \
machine_is_anubis() || \
machine_is_osiris() )
machine_is_osiris())
/*
* Set up timer interrupt, and return the current time in seconds.
......@@ -216,7 +216,7 @@ static void s3c2410_timer_setup (void)
tcnt--;
printk("timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n",
printk(KERN_DEBUG "timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n",
tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks);
/* check to see if timer is within 16bit range... */
......@@ -247,7 +247,7 @@ static void s3c2410_timer_setup (void)
__raw_writel(tcon, S3C2410_TCON);
}
static void __init s3c2410_timer_init (void)
static void __init s3c2410_timer_init(void)
{
s3c2410_timer_setup();
setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
......
arch/arm/plat-s3c24xx/Kconfig
View file @ c6ad1158
......@@ -15,6 +15,19 @@ config PLAT_S3C24XX
if PLAT_S3C24XX
# code that is shared between a number of the s3c24xx implementations
config S3C2410_CLOCK
bool
help
Clock code for the S3C2410, and similar processors which
is currently includes the S3C2410, S3C2440, S3C2442.
config S3C24XX_DCLK
bool
help
Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
config CPU_S3C244X
bool
depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
......@@ -70,6 +83,29 @@ config S3C2410_DMA_DEBUG
Enable debugging output for the DMA code. This option sends info
to the kernel log, at priority KERN_DEBUG.
config S3C24XX_ADC
bool "ADC common driver support"
help
Core support for the ADC block found in the S3C24XX SoC systems
for drivers such as the touchscreen and hwmon to use to share
this resource.
# SPI default pin configuration code
config S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13
bool
help
SPI GPIO configuration code for BUS0 when connected to
GPE11, GPE12 and GPE13.
config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7
bool
help
SPI GPIO configuration code for BUS 1 when connected to
GPG5, GPG6 and GPG7.
# common code for s3c24xx based machines, such as the SMDKs.
config MACH_SMDK
bool
help
......
arch/arm/plat-s3c24xx/Makefile
View file @ c6ad1158
......@@ -17,9 +17,8 @@ obj-y += irq.o
obj-y += devs.o
obj-y += gpio.o
obj-y += gpiolib.o
obj-y += time.o
obj-y += clock.o
obj-y += pwm-clock.o
obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o
# Architecture dependant builds
......@@ -30,5 +29,15 @@ obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += sleep.o
obj-$(CONFIG_HAVE_PWM) += pwm.o
obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o
obj-$(CONFIG_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C24XX_ADC) += adc.o
# SPI gpio central GPIO functions
obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o
obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7) += spi-bus1-gpg5_6_7.o
# machine common support
obj-$(CONFIG_MACH_SMDK) += common-smdk.o
arch/arm/plat-s3c24xx/adc.c 0 → 100644
View file @ c6ad1158
/* arch/arm/plat-s3c24xx/adc.c
*
* Copyright (c) 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
*
* S3C24XX ADC device core
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/list.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <plat/regs-adc.h>
#include <plat/adc.h>
/* This driver is designed to control the usage of the ADC block between
* the touchscreen and any other drivers that may need to use it, such as
* the hwmon driver.
*
* Priority will be given to the touchscreen driver, but as this itself is
* rate limited it should not starve other requests which are processed in
* order that they are received.
*
* Each user registers to get a client block which uniquely identifies it
* and stores information such as the necessary functions to callback when
* action is required.
*/
struct s3c_adc_client {
struct platform_device *pdev;
struct list_head pend;
unsigned int nr_samples;
unsigned char is_ts;
unsigned char channel;
void (*select_cb)(unsigned selected);
void (*convert_cb)(unsigned val1, unsigned val2);
};
struct adc_device {
struct platform_device *pdev;
struct platform_device *owner;
struct clk *clk;
struct s3c_adc_client *cur;
struct s3c_adc_client *ts_pend;
void __iomem *regs;
unsigned int prescale;
int irq;
};
static struct adc_device *adc_dev;
static LIST_HEAD(adc_pending);
#define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg)
static inline void s3c_adc_convert(struct adc_device *adc)
{
unsigned con = readl(adc->regs + S3C2410_ADCCON);
con |= S3C2410_ADCCON_ENABLE_START;
writel(con, adc->regs + S3C2410_ADCCON);
}
static inline void s3c_adc_select(struct adc_device *adc,
struct s3c_adc_client *client)
{
unsigned con = readl(adc->regs + S3C2410_ADCCON);
client->select_cb(1);
con &= ~S3C2410_ADCCON_MUXMASK;
con &= ~S3C2410_ADCCON_STDBM;
con &= ~S3C2410_ADCCON_STARTMASK;
if (!client->is_ts)
con |= S3C2410_ADCCON_SELMUX(client->channel);
writel(con, adc->regs + S3C2410_ADCCON);
}
static void s3c_adc_dbgshow(struct adc_device *adc)
{
adc_dbg(adc, "CON=%08x, TSC=%08x, DLY=%08x\n",
readl(adc->regs + S3C2410_ADCCON),
readl(adc->regs + S3C2410_ADCTSC),
readl(adc->regs + S3C2410_ADCDLY));
}
void s3c_adc_try(struct adc_device *adc)
{
struct s3c_adc_client *next = adc->ts_pend;
if (!next && !list_empty(&adc_pending)) {
next = list_first_entry(&adc_pending,
struct s3c_adc_client, pend);
list_del(&next->pend);
} else
adc->ts_pend = NULL;
if (next) {
adc_dbg(adc, "new client is %p\n", next);
adc->cur = next;
s3c_adc_select(adc, next);
s3c_adc_convert(adc);
s3c_adc_dbgshow(adc);
}
}
int s3c_adc_start(struct s3c_adc_client *client,
unsigned int channel, unsigned int nr_samples)
{
struct adc_device *adc = adc_dev;
unsigned long flags;
if (!adc) {
printk(KERN_ERR "%s: failed to find adc\n", __func__);
return -EINVAL;
}
if (client->is_ts && adc->ts_pend)
return -EAGAIN;
local_irq_save(flags);
client->channel = channel;
client->nr_samples = nr_samples;
if (client->is_ts)
adc->ts_pend = client;
else
list_add_tail(&client->pend, &adc_pending);
if (!adc->cur)
s3c_adc_try(adc);
local_irq_restore(flags);
return 0;
}
EXPORT_SYMBOL_GPL(s3c_adc_start);
static void s3c_adc_default_select(unsigned select)
{
}
struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
void (*select)(unsigned int selected),
void (*conv)(unsigned d0, unsigned d1),
unsigned int is_ts)
{
struct s3c_adc_client *client;
WARN_ON(!pdev);
WARN_ON(!conv);
if (!select)
select = s3c_adc_default_select;
if (!conv || !pdev)
return ERR_PTR(-EINVAL);
client = kzalloc(sizeof(struct s3c_adc_client), GFP_KERNEL);
if (!client) {
dev_err(&pdev->dev, "no memory for adc client\n");
return ERR_PTR(-ENOMEM);
}
client->pdev = pdev;
client->is_ts = is_ts;
client->select_cb = select;
client->convert_cb = conv;
return client;
}
EXPORT_SYMBOL_GPL(s3c_adc_register);
void s3c_adc_release(struct s3c_adc_client *client)
{
/* We should really check that nothing is in progress. */
kfree(client);
}
EXPORT_SYMBOL_GPL(s3c_adc_release);
static irqreturn_t s3c_adc_irq(int irq, void *pw)
{
struct adc_device *adc = pw;
struct s3c_adc_client *client = adc->cur;
unsigned long flags;
unsigned data0, data1;
if (!client) {
dev_warn(&adc->pdev->dev, "%s: no adc pending\n", __func__);
return IRQ_HANDLED;
}
data0 = readl(adc->regs + S3C2410_ADCDAT0);
data1 = readl(adc->regs + S3C2410_ADCDAT1);
adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
(client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff);
if (--client->nr_samples > 0) {
/* fire another conversion for this */
client->select_cb(1);
s3c_adc_convert(adc);
} else {
local_irq_save(flags);
(client->select_cb)(0);
adc->cur = NULL;
s3c_adc_try(adc);
local_irq_restore(flags);
}
return IRQ_HANDLED;
}
static int s3c_adc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct adc_device *adc;
struct resource *regs;
int ret;
adc = kzalloc(sizeof(struct adc_device), GFP_KERNEL);
if (adc == NULL) {
dev_err(dev, "failed to allocate adc_device\n");
return -ENOMEM;
}
adc->pdev = pdev;
adc->prescale = S3C2410_ADCCON_PRSCVL(49);
adc->irq = platform_get_irq(pdev, 1);
if (adc->irq <= 0) {
dev_err(dev, "failed to get adc irq\n");
ret = -ENOENT;
goto err_alloc;
}
ret = request_irq(adc->irq, s3c_adc_irq, 0, dev_name(dev), adc);
if (ret < 0) {
dev_err(dev, "failed to attach adc irq\n");
goto err_alloc;
}
adc->clk = clk_get(dev, "adc");
if (IS_ERR(adc->clk)) {
dev_err(dev, "failed to get adc clock\n");
ret = PTR_ERR(adc->clk);
goto err_irq;
}
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!regs) {
dev_err(dev, "failed to find registers\n");
ret = -ENXIO;
goto err_clk;
}
adc->regs = ioremap(regs->start, resource_size(regs));
if (!adc->regs) {
dev_err(dev, "failed to map registers\n");
ret = -ENXIO;
goto err_clk;
}
clk_enable(adc->clk);
writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
adc->regs + S3C2410_ADCCON);
dev_info(dev, "attached adc driver\n");
platform_set_drvdata(pdev, adc);
adc_dev = adc;
return 0;
err_clk:
clk_put(adc->clk);
err_irq:
free_irq(adc->irq, adc);
err_alloc:
kfree(adc);
return ret;
}
static int s3c_adc_remove(struct platform_device *pdev)
{
struct adc_device *adc = platform_get_drvdata(pdev);
iounmap(adc->regs);
free_irq(adc->irq, adc);
clk_disable(adc->clk);
clk_put(adc->clk);
kfree(adc);
return 0;
}
#ifdef CONFIG_PM
static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state)
{
struct adc_device *adc = platform_get_drvdata(pdev);
u32 con;
con = readl(adc->regs + S3C2410_ADCCON);
con |= S3C2410_ADCCON_STDBM;
writel(con, adc->regs + S3C2410_ADCCON);
clk_disable(adc->clk);
return 0;
}
static int s3c_adc_resume(struct platform_device *pdev)
{
struct adc_device *adc = platform_get_drvdata(pdev);
clk_enable(adc->clk);
writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
adc->regs + S3C2410_ADCCON);
return 0;
}
#else
#define s3c_adc_suspend NULL
#define s3c_adc_resume NULL
#endif
static struct platform_driver s3c_adc_driver = {
.driver = {
.name = "s3c24xx-adc",
.owner = THIS_MODULE,
},
.probe = s3c_adc_probe,
.remove = __devexit_p(s3c_adc_remove),
.suspend = s3c_adc_suspend,
.resume = s3c_adc_resume,
};
static int __init adc_init(void)
{
int ret;
ret = platform_driver_register(&s3c_adc_driver);
if (ret)
printk(KERN_ERR "%s: failed to add adc driver\n", __func__);
return ret;
}
arch_initcall(adc_init);
arch/arm/plat-s3c24xx/clock-dclk.c 0 → 100644
View file @ c6ad1158
/* linux/arch/arm/plat-s3c24xx/clock-dclk.c
*
* Copyright (c) 2004,2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* S3C24XX - definitions for DCLK and CLKOUT registers
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
#include <plat/clock.h>
#include <plat/cpu.h>
/* clocks that could be registered by external code */
static int s3c24xx_dclk_enable(struct clk *clk, int enable)
{
unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
if (enable)
dclkcon |= clk->ctrlbit;
else
dclkcon &= ~clk->ctrlbit;
__raw_writel(dclkcon, S3C24XX_DCLKCON);
return 0;
}
static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
{
unsigned long dclkcon;
unsigned int uclk;
if (parent == &clk_upll)
uclk = 1;
else if (parent == &clk_p)
uclk = 0;
else
return -EINVAL;
clk->parent = parent;
dclkcon = __raw_readl(S3C24XX_DCLKCON);
if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
if (uclk)
dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
else
dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
} else {
if (uclk)
dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
else
dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
}
__raw_writel(dclkcon, S3C24XX_DCLKCON);
return 0;
}
static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate)
{
unsigned long div;
if ((rate == 0) || !clk->parent)
return 0;
div = clk_get_rate(clk->parent) / rate;
if (div < 2)
div = 2;
else if (div > 16)
div = 16;
return div;
}
static unsigned long s3c24xx_round_dclk_rate(struct clk *clk,
unsigned long rate)
{
unsigned long div = s3c24xx_calc_div(clk, rate);
if (div == 0)
return 0;
return clk_get_rate(clk->parent) / div;
}
static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate)
{
unsigned long mask, data, div = s3c24xx_calc_div(clk, rate);
if (div == 0)
return -EINVAL;
if (clk == &s3c24xx_dclk0) {
mask = S3C2410_DCLKCON_DCLK0_DIV_MASK |
S3C2410_DCLKCON_DCLK0_CMP_MASK;
data = S3C2410_DCLKCON_DCLK0_DIV(div) |
S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2);
} else if (clk == &s3c24xx_dclk1) {
mask = S3C2410_DCLKCON_DCLK1_DIV_MASK |
S3C2410_DCLKCON_DCLK1_CMP_MASK;
data = S3C2410_DCLKCON_DCLK1_DIV(div) |
S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2);
} else
return -EINVAL;
clk->rate = clk_get_rate(clk->parent) / div;
__raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data),
S3C24XX_DCLKCON);
return clk->rate;
}
static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
{
unsigned long mask;
unsigned long source;
/* calculate the MISCCR setting for the clock */
if (parent == &clk_xtal)
source = S3C2410_MISCCR_CLK0_MPLL;
else if (parent == &clk_upll)
source = S3C2410_MISCCR_CLK0_UPLL;
else if (parent == &clk_f)
source = S3C2410_MISCCR_CLK0_FCLK;
else if (parent == &clk_h)
source = S3C2410_MISCCR_CLK0_HCLK;
else if (parent == &clk_p)
source = S3C2410_MISCCR_CLK0_PCLK;
else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
source = S3C2410_MISCCR_CLK0_DCLK0;
else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
source = S3C2410_MISCCR_CLK0_DCLK0;
else
return -EINVAL;
clk->parent = parent;
if (clk == &s3c24xx_clkout0)
mask = S3C2410_MISCCR_CLK0_MASK;
else {
source <<= 4;
mask = S3C2410_MISCCR_CLK1_MASK;
}
s3c2410_modify_misccr(mask, source);
return 0;
}
/* external clock definitions */
struct clk s3c24xx_dclk0 = {
.name = "dclk0",
.id = -1,
.ctrlbit = S3C2410_DCLKCON_DCLK0EN,
.enable = s3c24xx_dclk_enable,
.set_parent = s3c24xx_dclk_setparent,
.set_rate = s3c24xx_set_dclk_rate,
.round_rate = s3c24xx_round_dclk_rate,
};
struct clk s3c24xx_dclk1 = {
.name = "dclk1",
.id = -1,
.ctrlbit = S3C2410_DCLKCON_DCLK1EN,
.enable = s3c24xx_dclk_enable,
.set_parent = s3c24xx_dclk_setparent,
.set_rate = s3c24xx_set_dclk_rate,
.round_rate = s3c24xx_round_dclk_rate,
};
struct clk s3c24xx_clkout0 = {
.name = "clkout0",
.id = -1,
.set_parent = s3c24xx_clkout_setparent,
};
struct clk s3c24xx_clkout1 = {
.name = "clkout1",
.id = -1,
.set_parent = s3c24xx_clkout_setparent,
};
arch/arm/plat-s3c24xx/clock.c
View file @ c6ad1158
......@@ -27,18 +27,8 @@
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <mach/hardware.h>
......@@ -47,490 +37,23 @@
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
#include <plat/cpu-freq.h>
#include <plat/clock.h>
#include <plat/cpu.h>
/* clock information */
static LIST_HEAD(clocks);
DEFINE_MUTEX(clocks_mutex);
/* enable and disable calls for use with the clk struct */
static int clk_null_enable(struct clk *clk, int enable)
{
return 0;
}
/* Clock API calls */
struct clk *clk_get(struct device *dev, const char *id)
{
struct clk *p;
struct clk *clk = ERR_PTR(-ENOENT);
int idno;
if (dev == NULL || dev->bus != &platform_bus_type)
idno = -1;
else
idno = to_platform_device(dev)->id;
mutex_lock(&clocks_mutex);
list_for_each_entry(p, &clocks, list) {
if (p->id == idno &&
strcmp(id, p->name) == 0 &&
try_module_get(p->owner)) {
clk = p;
break;
}
}
/* check for the case where a device was supplied, but the
* clock that was being searched for is not device specific */
if (IS_ERR(clk)) {
list_for_each_entry(p, &clocks, list) {
if (p->id == -1 && strcmp(id, p->name) == 0 &&
try_module_get(p->owner)) {
clk = p;
break;
}
}
}
mutex_unlock(&clocks_mutex);
return clk;
}
void clk_put(struct clk *clk)
{
module_put(clk->owner);
}
int clk_enable(struct clk *clk)
{
if (IS_ERR(clk) || clk == NULL)
return -EINVAL;
clk_enable(clk->parent);
mutex_lock(&clocks_mutex);
if ((clk->usage++) == 0)
(clk->enable)(clk, 1);
mutex_unlock(&clocks_mutex);
return 0;
}
void clk_disable(struct clk *clk)
{
if (IS_ERR(clk) || clk == NULL)
return;
mutex_lock(&clocks_mutex);
if ((--clk->usage) == 0)
(clk->enable)(clk, 0);
mutex_unlock(&clocks_mutex);
clk_disable(clk->parent);
}
unsigned long clk_get_rate(struct clk *clk)
{
if (IS_ERR(clk))
return 0;
if (clk->rate != 0)
return clk->rate;
if (clk->get_rate != NULL)
return (clk->get_rate)(clk);
if (clk->parent != NULL)
return clk_get_rate(clk->parent);
return clk->rate;
}
long clk_round_rate(struct clk *clk, unsigned long rate)
{
if (!IS_ERR(clk) && clk->round_rate)
return (clk->round_rate)(clk, rate);
return rate;
}
int clk_set_rate(struct clk *clk, unsigned long rate)
{
int ret;
if (IS_ERR(clk))
return -EINVAL;
/* We do not default just do a clk->rate = rate as
* the clock may have been made this way by choice.
*/
WARN_ON(clk->set_rate == NULL);
if (clk->set_rate == NULL)
return -EINVAL;
mutex_lock(&clocks_mutex);
ret = (clk->set_rate)(clk, rate);
mutex_unlock(&clocks_mutex);
return ret;
}
struct clk *clk_get_parent(struct clk *clk)
{
return clk->parent;
}
int clk_set_parent(struct clk *clk, struct clk *parent)
{
int ret = 0;
if (IS_ERR(clk))
return -EINVAL;
mutex_lock(&clocks_mutex);
if (clk->set_parent)
ret = (clk->set_parent)(clk, parent);
mutex_unlock(&clocks_mutex);
return ret;
}
EXPORT_SYMBOL(clk_get);
EXPORT_SYMBOL(clk_put);
EXPORT_SYMBOL(clk_enable);
EXPORT_SYMBOL(clk_disable);
EXPORT_SYMBOL(clk_get_rate);
EXPORT_SYMBOL(clk_round_rate);
EXPORT_SYMBOL(clk_set_rate);
EXPORT_SYMBOL(clk_get_parent);
EXPORT_SYMBOL(clk_set_parent);
/* base clocks */
static int clk_default_setrate(struct clk *clk, unsigned long rate)
{
clk->rate = rate;
return 0;
}
struct clk clk_xtal = {
.name = "xtal",
.id = -1,
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
};
struct clk clk_mpll = {
.name = "mpll",
.id = -1,
.set_rate = clk_default_setrate,
};
struct clk clk_upll = {
.name = "upll",
.id = -1,
.parent = NULL,
.ctrlbit = 0,
};
struct clk clk_f = {
.name = "fclk",
.id = -1,
.rate = 0,
.parent = &clk_mpll,
.ctrlbit = 0,
.set_rate = clk_default_setrate,
};
struct clk clk_h = {
.name = "hclk",
.id = -1,
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
.set_rate = clk_default_setrate,
};
struct clk clk_p = {
.name = "pclk",
.id = -1,
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
.set_rate = clk_default_setrate,
};
struct clk clk_usb_bus = {
.name = "usb-bus",
.id = -1,
.rate = 0,
.parent = &clk_upll,
};
/* clocks that could be registered by external code */
static int s3c24xx_dclk_enable(struct clk *clk, int enable)
{
unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
if (enable)
dclkcon |= clk->ctrlbit;
else
dclkcon &= ~clk->ctrlbit;
__raw_writel(dclkcon, S3C24XX_DCLKCON);
return 0;
}
static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
{
unsigned long dclkcon;
unsigned int uclk;
if (parent == &clk_upll)
uclk = 1;
else if (parent == &clk_p)
uclk = 0;
else
return -EINVAL;
clk->parent = parent;
dclkcon = __raw_readl(S3C24XX_DCLKCON);
if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
if (uclk)
dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
else
dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
} else {
if (uclk)
dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
else
dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
}
__raw_writel(dclkcon, S3C24XX_DCLKCON);
return 0;
}
static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate)
{
unsigned long div;
if ((rate == 0) || !clk->parent)
return 0;
div = clk_get_rate(clk->parent) / rate;
if (div < 2)
div = 2;
else if (div > 16)
div = 16;
return div;
}
static unsigned long s3c24xx_round_dclk_rate(struct clk *clk,
unsigned long rate)
{
unsigned long div = s3c24xx_calc_div(clk, rate);
if (div == 0)
return 0;
return clk_get_rate(clk->parent) / div;
}
static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate)
{
unsigned long mask, data, div = s3c24xx_calc_div(clk, rate);
if (div == 0)
return -EINVAL;
if (clk == &s3c24xx_dclk0) {
mask = S3C2410_DCLKCON_DCLK0_DIV_MASK |
S3C2410_DCLKCON_DCLK0_CMP_MASK;
data = S3C2410_DCLKCON_DCLK0_DIV(div) |
S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2);
} else if (clk == &s3c24xx_dclk1) {
mask = S3C2410_DCLKCON_DCLK1_DIV_MASK |
S3C2410_DCLKCON_DCLK1_CMP_MASK;
data = S3C2410_DCLKCON_DCLK1_DIV(div) |
S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2);
} else
return -EINVAL;
clk->rate = clk_get_rate(clk->parent) / div;
__raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data),
S3C24XX_DCLKCON);
return clk->rate;
}
static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
{
unsigned long mask;
unsigned long source;
/* calculate the MISCCR setting for the clock */
if (parent == &clk_xtal)
source = S3C2410_MISCCR_CLK0_MPLL;
else if (parent == &clk_upll)
source = S3C2410_MISCCR_CLK0_UPLL;
else if (parent == &clk_f)
source = S3C2410_MISCCR_CLK0_FCLK;
else if (parent == &clk_h)
source = S3C2410_MISCCR_CLK0_HCLK;
else if (parent == &clk_p)
source = S3C2410_MISCCR_CLK0_PCLK;
else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
source = S3C2410_MISCCR_CLK0_DCLK0;
else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
source = S3C2410_MISCCR_CLK0_DCLK0;
else
return -EINVAL;
clk->parent = parent;
if (clk == &s3c24xx_clkout0)
mask = S3C2410_MISCCR_CLK0_MASK;
else {
source <<= 4;
mask = S3C2410_MISCCR_CLK1_MASK;
}
s3c2410_modify_misccr(mask, source);
return 0;
}
/* external clock definitions */
struct clk s3c24xx_dclk0 = {
.name = "dclk0",
.id = -1,
.ctrlbit = S3C2410_DCLKCON_DCLK0EN,
.enable = s3c24xx_dclk_enable,
.set_parent = s3c24xx_dclk_setparent,
.set_rate = s3c24xx_set_dclk_rate,
.round_rate = s3c24xx_round_dclk_rate,
};
struct clk s3c24xx_dclk1 = {
.name = "dclk1",
.id = -1,
.ctrlbit = S3C2410_DCLKCON_DCLK1EN,
.enable = s3c24xx_dclk_enable,
.set_parent = s3c24xx_dclk_setparent,
.set_rate = s3c24xx_set_dclk_rate,
.round_rate = s3c24xx_round_dclk_rate,
};
struct clk s3c24xx_clkout0 = {
.name = "clkout0",
.id = -1,
.set_parent = s3c24xx_clkout_setparent,
};
struct clk s3c24xx_clkout1 = {
.name = "clkout1",
.id = -1,
.set_parent = s3c24xx_clkout_setparent,
};
struct clk s3c24xx_uclk = {
.name = "uclk",
.id = -1,
};
/* initialise the clock system */
int s3c24xx_register_clock(struct clk *clk)
{
clk->owner = THIS_MODULE;
if (clk->enable == NULL)
clk->enable = clk_null_enable;
/* add to the list of available clocks */
mutex_lock(&clocks_mutex);
list_add(&clk->list, &clocks);
mutex_unlock(&clocks_mutex);
return 0;
}
int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
{
int fails = 0;
for (; nr_clks > 0; nr_clks--, clks++) {
if (s3c24xx_register_clock(*clks) < 0)
fails++;
}
return fails;
}
#include <plat/pll.h>
/* initalise all the clocks */
int __init s3c24xx_setup_clocks(unsigned long xtal,
unsigned long fclk,
void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
unsigned long hclk,
unsigned long pclk)
{
printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
/* initialise the main system clocks */
clk_xtal.rate = xtal;
clk_upll.rate = s3c2410_get_pll(__raw_readl(S3C2410_UPLLCON), xtal);
clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON),
clk_xtal.rate);
clk_mpll.rate = fclk;
clk_h.rate = hclk;
clk_p.rate = pclk;
clk_f.rate = fclk;
/* assume uart clocks are correctly setup */
/* register our clocks */
if (s3c24xx_register_clock(&clk_xtal) < 0)
printk(KERN_ERR "failed to register master xtal\n");
if (s3c24xx_register_clock(&clk_mpll) < 0)
printk(KERN_ERR "failed to register mpll clock\n");
if (s3c24xx_register_clock(&clk_upll) < 0)
printk(KERN_ERR "failed to register upll clock\n");
if (s3c24xx_register_clock(&clk_f) < 0)
printk(KERN_ERR "failed to register cpu fclk\n");
if (s3c24xx_register_clock(&clk_h) < 0)
printk(KERN_ERR "failed to register cpu hclk\n");
if (s3c24xx_register_clock(&clk_p) < 0)
printk(KERN_ERR "failed to register cpu pclk\n");
return 0;
}
arch/arm/plat-s3c24xx/cpu.c
View file @ c6ad1158
......@@ -55,16 +55,6 @@
#include <plat/s3c2442.h>
#include <plat/s3c2443.h>
struct cpu_table {
unsigned long idcode;
unsigned long idmask;
void (*map_io)(struct map_desc *mach_desc, int size);
void (*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
void (*init_clocks)(int xtal);
int (*init)(void);
const char *name;
};
/* table of supported CPUs */
static const char name_s3c2400[] = "S3C2400";
......@@ -169,23 +159,7 @@ static struct map_desc s3c_iodesc[] __initdata = {
IODESC_ENT(UART)
};
static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode)
{
struct cpu_table *tab;
int count;
tab = cpu_ids;
for (count = 0; count < ARRAY_SIZE(cpu_ids); count++, tab++) {
if ((idcode & tab->idmask) == tab->idcode)
return tab;
}
return NULL;
}
/* cpu information */
static struct cpu_table *cpu;
/* read cpu identificaiton code */
static unsigned long s3c24xx_read_idcode_v5(void)
{
......@@ -231,6 +205,7 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
unsigned long idcode = 0x0;
/* initialise the io descriptors we need for initialisation */
iotable_init(mach_desc, size);
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
if (cpu_architecture() >= CPU_ARCH_ARMv5) {
......@@ -239,117 +214,7 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
idcode = s3c24xx_read_idcode_v4();
}
cpu = s3c_lookup_cpu(idcode);
if (cpu == NULL) {
printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode);
panic("Unknown S3C24XX CPU");
}
printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
if (cpu->map_io == NULL || cpu->init == NULL) {
printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
panic("Unsupported S3C24XX CPU");
}
arm_pm_restart = s3c24xx_pm_restart;
(cpu->map_io)(mach_desc, size);
}
/* s3c24xx_init_clocks
*
* Initialise the clock subsystem and associated information from the
* given master crystal value.
*
* xtal = 0 -> use default PLL crystal value (normally 12MHz)
* != 0 -> PLL crystal value in Hz
*/
void __init s3c24xx_init_clocks(int xtal)
{
if (xtal == 0)
xtal = 12*1000*1000;
if (cpu == NULL)
panic("s3c24xx_init_clocks: no cpu setup?\n");
if (cpu->init_clocks == NULL)
panic("s3c24xx_init_clocks: cpu has no clock init\n");
else
(cpu->init_clocks)(xtal);
}
/* uart management */
static int nr_uarts __initdata = 0;
static struct s3c2410_uartcfg uart_cfgs[3];
/* s3c24xx_init_uartdevs
*
* copy the specified platform data and configuration into our central
* set of devices, before the data is thrown away after the init process.
*
* This also fills in the array passed to the serial driver for the
* early initialisation of the console.
*/
void __init s3c24xx_init_uartdevs(char *name,
struct s3c24xx_uart_resources *res,
struct s3c2410_uartcfg *cfg, int no)
{
struct platform_device *platdev;
struct s3c2410_uartcfg *cfgptr = uart_cfgs;
struct s3c24xx_uart_resources *resp;
int uart;
memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no);
for (uart = 0; uart < no; uart++, cfg++, cfgptr++) {
platdev = s3c24xx_uart_src[cfgptr->hwport];
resp = res + cfgptr->hwport;
s3c24xx_uart_devs[uart] = platdev;
platdev->name = name;
platdev->resource = resp->resources;
platdev->num_resources = resp->nr_resources;
platdev->dev.platform_data = cfgptr;
}
nr_uarts = no;
s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
}
void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
if (cpu == NULL)
return;
if (cpu->init_uarts == NULL) {
printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
} else
(cpu->init_uarts)(cfg, no);
}
static int __init s3c_arch_init(void)
{
int ret;
// do the correct init for cpu
if (cpu == NULL)
panic("s3c_arch_init: NULL cpu\n");
ret = (cpu->init)();
if (ret != 0)
return ret;
ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
return ret;
}
arch_initcall(s3c_arch_init);
arch/arm/plat-s3c24xx/devs.c
View file @ c6ad1158
......@@ -372,12 +372,20 @@ static struct resource s3c_adc_resource[] = {
};
struct platform_device s3c_device_adc = {
.name = "s3c2410-adc",
.name = "s3c24xx-adc",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_adc_resource),
.resource = s3c_adc_resource,
};
/* HWMON */
struct platform_device s3c_device_hwmon = {
.name = "s3c24xx-hwmon",
.id = -1,
.dev.parent = &s3c_device_adc.dev,
};
/* SDI */
static struct resource s3c_sdi_resource[] = {
......
arch/arm/plat-s3c24xx/gpiolib.c
View file @ c6ad1158
......@@ -161,8 +161,6 @@ static struct s3c24xx_gpio_chip gpios[] = {
.ngpio = 24,
.direction_input = s3c24xx_gpiolib_banka_input,
.direction_output = s3c24xx_gpiolib_banka_output,
.set = s3c24xx_gpiolib_set,
.get = s3c24xx_gpiolib_get,
},
},
[1] = {
......@@ -172,10 +170,6 @@ static struct s3c24xx_gpio_chip gpios[] = {
.owner = THIS_MODULE,
.label = "GPIOB",
.ngpio = 16,
.direction_input = s3c24xx_gpiolib_input,
.direction_output = s3c24xx_gpiolib_output,
.set = s3c24xx_gpiolib_set,
.get = s3c24xx_gpiolib_get,
},
},
[2] = {
......@@ -185,10 +179,6 @@ static struct s3c24xx_gpio_chip gpios[] = {
.owner = THIS_MODULE,
.label = "GPIOC",
.ngpio = 16,
.direction_input = s3c24xx_gpiolib_input,
.direction_output = s3c24xx_gpiolib_output,
.set = s3c24xx_gpiolib_set,
.get = s3c24xx_gpiolib_get,
},
},
[3] = {
......@@ -198,10 +188,6 @@ static struct s3c24xx_gpio_chip gpios[] = {
.owner = THIS_MODULE,
.label = "GPIOD",
.ngpio = 16,
.direction_input = s3c24xx_gpiolib_input,
.direction_output = s3c24xx_gpiolib_output,
.set = s3c24xx_gpiolib_set,
.get = s3c24xx_gpiolib_get,
},
},
[4] = {
......@@ -211,10 +197,6 @@ static struct s3c24xx_gpio_chip gpios[] = {
.label = "GPIOE",
.owner = THIS_MODULE,
.ngpio = 16,
.direction_input = s3c24xx_gpiolib_input,
.direction_output = s3c24xx_gpiolib_output,
.set = s3c24xx_gpiolib_set,
.get = s3c24xx_gpiolib_get,
},
},
[5] = {
......@@ -224,10 +206,6 @@ static struct s3c24xx_gpio_chip gpios[] = {
.owner = THIS_MODULE,
.label = "GPIOF",
.ngpio = 8,
.direction_input = s3c24xx_gpiolib_input,
.direction_output = s3c24xx_gpiolib_output,
.set = s3c24xx_gpiolib_set,
.get = s3c24xx_gpiolib_get,
},
},
[6] = {
......@@ -237,21 +215,38 @@ static struct s3c24xx_gpio_chip gpios[] = {
.owner = THIS_MODULE,
.label = "GPIOG",
.ngpio = 10,
.direction_input = s3c24xx_gpiolib_input,
.direction_output = s3c24xx_gpiolib_output,
.set = s3c24xx_gpiolib_set,
.get = s3c24xx_gpiolib_get,
},
},
};
static __init void s3c24xx_gpiolib_add(struct s3c24xx_gpio_chip *chip)
{
struct gpio_chip *gc = &chip->chip;
BUG_ON(!chip->base);
BUG_ON(!gc->label);
BUG_ON(!gc->ngpio);
if (!gc->direction_input)
gc->direction_input = s3c24xx_gpiolib_input;
if (!gc->direction_output)
gc->direction_output = s3c24xx_gpiolib_output;
if (!gc->set)
gc->set = s3c24xx_gpiolib_set;
if (!gc->get)
gc->get = s3c24xx_gpiolib_get;
/* gpiochip_add() prints own failure message on error. */
gpiochip_add(gc);
}
static __init int s3c24xx_gpiolib_init(void)
{
struct s3c24xx_gpio_chip *chip = gpios;
int gpn;
for (gpn = 0; gpn < ARRAY_SIZE(gpios); gpn++, chip++)
gpiochip_add(&chip->chip);
s3c24xx_gpiolib_add(chip);
return 0;
}
......
arch/arm/plat-s3c24xx/include/plat/pll.h 0 → 100644
View file @ c6ad1158
/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C24xx - common pll registers and code
*/
#define S3C24XX_PLLCON_MDIVSHIFT 12
#define S3C24XX_PLLCON_PDIVSHIFT 4
#define S3C24XX_PLLCON_SDIVSHIFT 0
#define S3C24XX_PLLCON_MDIVMASK ((1<<(1+(19-12)))-1)
#define S3C24XX_PLLCON_PDIVMASK ((1<<5)-1)
#define S3C24XX_PLLCON_SDIVMASK 3
#include <asm/div64.h>
static inline unsigned int
s3c24xx_get_pll(unsigned int pllval, unsigned int baseclk)
{
unsigned int mdiv, pdiv, sdiv;
uint64_t fvco;
mdiv = pllval >> S3C24XX_PLLCON_MDIVSHIFT;
pdiv = pllval >> S3C24XX_PLLCON_PDIVSHIFT;
sdiv = pllval >> S3C24XX_PLLCON_SDIVSHIFT;
mdiv &= S3C24XX_PLLCON_MDIVMASK;
pdiv &= S3C24XX_PLLCON_PDIVMASK;
sdiv &= S3C24XX_PLLCON_SDIVMASK;
fvco = (uint64_t)baseclk * (mdiv + 8);
do_div(fvco, (pdiv + 2) << sdiv);
return (unsigned int)fvco;
}
arch/arm/plat-s3c24xx/include/plat/s3c2400.h
View file @ c6ad1158
......@@ -17,7 +17,7 @@
extern int s3c2400_init(void);
extern void s3c2400_map_io(struct map_desc *mach_desc, int size);
extern void s3c2400_map_io(void);
extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no);
......
arch/arm/plat-s3c24xx/include/plat/s3c2410.h
View file @ c6ad1158
......@@ -15,7 +15,7 @@
extern int s3c2410_init(void);
extern void s3c2410_map_io(struct map_desc *mach_desc, int size);
extern void s3c2410_map_io(void);
extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
......
arch/arm/plat-s3c24xx/include/plat/s3c2412.h
View file @ c6ad1158
......@@ -14,7 +14,7 @@
extern int s3c2412_init(void);
extern void s3c2412_map_io(struct map_desc *mach_desc, int size);
extern void s3c2412_map_io(void);
extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
......
arch/arm/plat-s3c24xx/include/plat/s3c2443.h
View file @ c6ad1158
......@@ -16,7 +16,7 @@ struct s3c2410_uartcfg;
extern int s3c2443_init(void);
extern void s3c2443_map_io(struct map_desc *mach_desc, int size);
extern void s3c2443_map_io(void);
extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
......
arch/arm/plat-s3c24xx/irq.c
View file @ c6ad1158
......@@ -62,6 +62,7 @@
#include <asm/mach/irq.h>
#include <plat/regs-irqtype.h>
#include <mach/regs-irq.h>
#include <mach/regs-gpio.h>
......
arch/arm/plat-s3c24xx/pm.c
View file @ c6ad1158
......@@ -76,11 +76,13 @@ static struct sleep_save core_save[] = {
SAVE_ITEM(S3C2410_BANKCON4),
SAVE_ITEM(S3C2410_BANKCON5),
#ifndef CONFIG_CPU_FREQ
SAVE_ITEM(S3C2410_CLKDIVN),
SAVE_ITEM(S3C2410_MPLLCON),
SAVE_ITEM(S3C2410_REFRESH),
#endif
SAVE_ITEM(S3C2410_UPLLCON),
SAVE_ITEM(S3C2410_CLKSLOW),
SAVE_ITEM(S3C2410_REFRESH),
};
static struct gpio_sleep {
......
arch/arm/plat-s3c24xx/s3c244x-clock.c
View file @ c6ad1158
......@@ -31,7 +31,6 @@
#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/mutex.h>
#include <linux/clk.h>
#include <linux/io.h>
......@@ -102,13 +101,13 @@ static int s3c244x_clk_add(struct sys_device *sysdev)
if (clk_get_rate(clock_upll) > (94 * MHZ)) {
clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
mutex_lock(&clocks_mutex);
spin_lock(&clocks_lock);
clkdivn = __raw_readl(S3C2410_CLKDIVN);
clkdivn |= S3C2440_CLKDIVN_UCLK;
__raw_writel(clkdivn, S3C2410_CLKDIVN);
mutex_unlock(&clocks_mutex);
spin_unlock(&clocks_lock);
}
return 0;
......
arch/arm/plat-s3c24xx/s3c244x.c
View file @ c6ad1158
......@@ -29,6 +29,8 @@
#include <mach/hardware.h>
#include <asm/irq.h>
#include <plat/cpu-freq.h>
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
......@@ -42,6 +44,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
#include <plat/pll.h>
static struct map_desc s3c244x_iodesc[] __initdata = {
IODESC_ENT(CLKPWR),
......@@ -56,12 +59,11 @@ void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no)
s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
}
void __init s3c244x_map_io(struct map_desc *mach_desc, int size)
void __init s3c244x_map_io(void)
{
/* register our io-tables */
iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc));
iotable_init(mach_desc, size);
/* rename any peripherals used differing from the s3c2410 */
......@@ -71,17 +73,20 @@ void __init s3c244x_map_io(struct map_desc *mach_desc, int size)
s3c_device_usbgadget.name = "s3c2440-usbgadget";
}
void __init s3c244x_init_clocks(int xtal)
void __init_or_cpufreq s3c244x_setup_clocks(void)
{
struct clk *xtal_clk;
unsigned long clkdiv;
unsigned long camdiv;
unsigned long xtal;
unsigned long hclk, fclk, pclk;
int hdiv = 1;
/* now we've got our machine bits initialised, work out what
* clocks we've got */
xtal_clk = clk_get(NULL, "xtal");
xtal = clk_get_rate(xtal_clk);
clk_put(xtal_clk);
fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
clkdiv = __raw_readl(S3C2410_CLKDIVN);
camdiv = __raw_readl(S3C2440_CAMDIVN);
......@@ -107,18 +112,24 @@ void __init s3c244x_init_clocks(int xtal)
}
hclk = fclk / hdiv;
pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN)? 2:1);
pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1);
/* print brief summary of clocks, etc */
printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
s3c24xx_setup_clocks(fclk, hclk, pclk);
}
void __init s3c244x_init_clocks(int xtal)
{
/* initialise the clocks here, to allow other things like the
* console to use them, and to add new ones after the initialisation
*/
s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
s3c24xx_register_baseclocks(xtal);
s3c244x_setup_clocks();
s3c2410_baseclk_add();
}
......
arch/arm/plat-s3c24xx/s3c244x.h
View file @ c6ad1158
......@@ -12,7 +12,7 @@
#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
extern void s3c244x_map_io(struct map_desc *mach_desc, int size);
extern void s3c244x_map_io(void);
extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
......
arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c 0 → 100644
View file @ c6ad1158
/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
*
* Copyright (c) 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C24XX SPI - gpio configuration for bus 0 on gpe11,12,13
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*/
#include <linux/kernel.h>
#include <mach/hardware.h>
#include <mach/spi.h>
#include <mach/regs-gpio.h>
void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
int enable)
{
if (enable) {
s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPE13_SPICLK0);
s3c2410_gpio_cfgpin(S3C2410_GPE12, S3C2410_GPE12_SPIMOSI0);
s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPE11_SPIMISO0);
s3c2410_gpio_pullup(S3C2410_GPE11, 0);
s3c2410_gpio_pullup(S3C2410_GPE13, 0);
} else {
s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPIO_INPUT);
s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPIO_INPUT);
s3c2410_gpio_pullup(S3C2410_GPE11, 1);
s3c2410_gpio_pullup(S3C2410_GPE12, 1);
s3c2410_gpio_pullup(S3C2410_GPE13, 1);
}
}
arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c 0 → 100644
View file @ c6ad1158
/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpg5_6_7.c
*
* Copyright (c) 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C24XX SPI - gpio configuration for bus 1 on gpg5,6,7
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*/
#include <linux/kernel.h>
#include <mach/hardware.h>
#include <mach/spi.h>
#include <mach/regs-gpio.h>
void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
int enable)
{
if (enable) {
s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPG7_SPICLK1);
s3c2410_gpio_cfgpin(S3C2410_GPG6, S3C2410_GPG6_SPIMOSI1);
s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPG5_SPIMISO1);
s3c2410_gpio_pullup(S3C2410_GPG5, 0);
s3c2410_gpio_pullup(S3C2410_GPG6, 0);
} else {
s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPIO_INPUT);
s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPIO_INPUT);
s3c2410_gpio_pullup(S3C2410_GPG5, 1);
s3c2410_gpio_pullup(S3C2410_GPG6, 1);
s3c2410_gpio_pullup(S3C2410_GPG7, 1);
}
}
drivers/serial/samsung.c
View file @ c6ad1158
......@@ -42,6 +42,7 @@
#include <linux/serial.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <asm/irq.h>
......@@ -452,6 +453,8 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
{
struct s3c24xx_uart_port *ourport = to_ourport(port);
ourport->pm_level = level;
switch (level) {
case 3:
if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
......@@ -661,6 +664,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
ourport->clksrc = clksrc;
ourport->baudclk = clk;
ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
}
switch (termios->c_cflag & CSIZE) {
......@@ -890,6 +894,93 @@ static inline int s3c24xx_serial_resetport(struct uart_port *port,
return (info->reset_port)(port, cfg);
}
#ifdef CONFIG_CPU_FREQ
static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
unsigned long val, void *data)
{
struct s3c24xx_uart_port *port;
struct uart_port *uport;
port = container_of(nb, struct s3c24xx_uart_port, freq_transition);
uport = &port->port;
/* check to see if port is enabled */
if (port->pm_level != 0)
return 0;
/* try and work out if the baudrate is changing, we can detect
* a change in rate, but we do not have support for detecting
* a disturbance in the clock-rate over the change.
*/
if (IS_ERR(port->clk))
goto exit;
if (port->baudclk_rate == clk_get_rate(port->clk))
goto exit;
if (val == CPUFREQ_PRECHANGE) {
/* we should really shut the port down whilst the
* frequency change is in progress. */
} else if (val == CPUFREQ_POSTCHANGE) {
struct ktermios *termios;
struct tty_struct *tty;
if (uport->info == NULL) {
printk(KERN_WARNING "%s: info NULL\n", __func__);
goto exit;
}
tty = uport->info->port.tty;
if (tty == NULL) {
printk(KERN_WARNING "%s: tty is NULL\n", __func__);
goto exit;
}
termios = tty->termios;
if (termios == NULL) {
printk(KERN_WARNING "%s: no termios?\n", __func__);
goto exit;
}
s3c24xx_serial_set_termios(uport, termios, NULL);
}
exit:
return 0;
}
static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
{
port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition;
return cpufreq_register_notifier(&port->freq_transition,
CPUFREQ_TRANSITION_NOTIFIER);
}
static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
{
cpufreq_unregister_notifier(&port->freq_transition,
CPUFREQ_TRANSITION_NOTIFIER);
}
#else
static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
{
return 0;
}
static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
{
}
#endif
/* s3c24xx_serial_init_port
*
* initialise a single serial port from the platform device given
......@@ -1002,6 +1093,10 @@ int s3c24xx_serial_probe(struct platform_device *dev,
if (ret < 0)
printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__);
ret = s3c24xx_serial_cpufreq_register(ourport);
if (ret < 0)
dev_err(&dev->dev, "failed to add cpufreq notifier\n");
return 0;
probe_err:
......@@ -1015,6 +1110,7 @@ int s3c24xx_serial_remove(struct platform_device *dev)
struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
if (port) {
s3c24xx_serial_cpufreq_deregister(to_ourport(port));
device_remove_file(&dev->dev, &dev_attr_clock_source);
uart_remove_one_port(&s3c24xx_uart_drv, port);
}
......
drivers/serial/samsung.h
View file @ c6ad1158
......@@ -33,12 +33,18 @@ struct s3c24xx_uart_info {
struct s3c24xx_uart_port {
unsigned char rx_claimed;
unsigned char tx_claimed;
unsigned int pm_level;
unsigned long baudclk_rate;
struct s3c24xx_uart_info *info;
struct s3c24xx_uart_clksrc *clksrc;
struct clk *clk;
struct clk *baudclk;
struct uart_port port;
#ifdef CONFIG_CPU_FREQ
struct notifier_block freq_transition;
#endif
};
/* conversion functions */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7