staging: wilc1000: remove 'linux_' prefix in function names

Remove 'linux_' prefix and replace it with 'wilc_' namespace.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/wilc1000/linux_wlan.c

@@ -139,7 +139,7 @@ int wilc_wlan_get_num_conn_ifcs(struct wilc *wilc)
 	return ret_val;
 }
 
-static int linux_wlan_txq_task(void *vp)
+static int wilc_txq_task(void *vp)
 {
 	int ret;
 	u32 txq_count;
@@ -202,7 +202,7 @@ static int wilc_wlan_get_firmware(struct net_device *dev)
 	return ret;
 }
 
-static int linux_wlan_start_firmware(struct net_device *dev)
+static int wilc_start_firmware(struct net_device *dev)
 {
 	struct wilc_vif *vif = netdev_priv(dev);
 	struct wilc *wilc = vif->wilc;
@@ -243,8 +243,7 @@ static int wilc1000_firmware_download(struct net_device *dev)
 	return 0;
 }
 
-static int linux_wlan_init_fw_config(struct net_device *dev,
-				     struct wilc_vif *vif)
+static int wilc_init_fw_config(struct net_device *dev, struct wilc_vif *vif)
 {
 	struct wilc_priv *priv;
 	struct host_if_drv *hif_drv;
@@ -502,7 +501,7 @@ static int wlan_initialize_threads(struct net_device *dev)
 	struct wilc_vif *vif = netdev_priv(dev);
 	struct wilc *wilc = vif->wilc;
 
-	wilc->txq_thread = kthread_run(linux_wlan_txq_task, (void *)dev,
+	wilc->txq_thread = kthread_run(wilc_txq_task, (void *)dev,
 				       "K_TXQ_TASK");
 	if (IS_ERR(wilc->txq_thread)) {
 		netdev_err(dev, "couldn't create TXQ thread\n");
@@ -560,7 +559,7 @@ static int wilc_wlan_initialize(struct net_device *dev, struct wilc_vif *vif)
 			goto fail_irq_enable;
 		}
 
-		ret = linux_wlan_start_firmware(dev);
+		ret = wilc_start_firmware(dev);
 		if (ret < 0) {
 			ret = -EIO;
 			goto fail_irq_enable;
@@ -576,7 +575,7 @@ static int wilc_wlan_initialize(struct net_device *dev, struct wilc_vif *vif)
 			firmware_ver[size] = '\0';
 			netdev_dbg(dev, "Firmware Ver = %s\n", firmware_ver);
 		}
-		ret = linux_wlan_init_fw_config(dev, vif);
+		ret = wilc_init_fw_config(dev, vif);
 
 		if (ret < 0) {
 			netdev_err(dev, "Failed to configure firmware\n");
@@ -726,7 +725,7 @@ static void wilc_set_multicast_list(struct net_device *dev)
 		kfree(mc_list);
 }
 
-static void linux_wlan_tx_complete(void *priv, int status)
+static void wilc_tx_complete(void *priv, int status)
 {
 	struct tx_complete_data *pv_data = priv;
 
@@ -762,7 +761,7 @@ netdev_tx_t wilc_mac_xmit(struct sk_buff *skb, struct net_device *ndev)
 	tx_data->bssid = wilc->vif[vif->idx]->bssid;
 	queue_count = wilc_wlan_txq_add_net_pkt(ndev, (void *)tx_data,
 						tx_data->buff, tx_data->size,
-						linux_wlan_tx_complete);
+						wilc_tx_complete);
 
 	if (queue_count > FLOW_CONTROL_UPPER_THRESHOLD) {
 		if (wilc->vif[0]->mac_opened)

drivers/staging/wilc1000/wilc_sdio.c

@@ -117,7 +117,7 @@ static int wilc_sdio_cmd53(struct wilc *wilc, struct sdio_cmd53 *cmd)
 	return ret;
 }
 
-static int linux_sdio_probe(struct sdio_func *func,
+static int wilc_sdio_probe(struct sdio_func *func,
 			   const struct sdio_device_id *id)
 {
 	struct wilc *wilc;
@@ -156,7 +156,7 @@ static int linux_sdio_probe(struct sdio_func *func,
 	return 0;
 }
 
-static void linux_sdio_remove(struct sdio_func *func)
+static void wilc_sdio_remove(struct sdio_func *func)
 {
 	struct wilc *wilc = sdio_get_drvdata(func);
 
@@ -1127,8 +1127,8 @@ static const struct dev_pm_ops wilc_sdio_pm_ops = {
 static struct sdio_driver wilc_sdio_driver = {
 	.name		= SDIO_MODALIAS,
 	.id_table	= wilc_sdio_ids,
-	.probe		= linux_sdio_probe,
-	.remove		= linux_sdio_remove,
+	.probe		= wilc_sdio_probe,
+	.remove		= wilc_sdio_remove,
 	.drv = {
 		.pm = &wilc_sdio_pm_ops,
 		.of_match_table = wilc_of_match,