Commit c733e40c authored by Nikola Cornij's avatar Nikola Cornij Committed by Alex Deucher

drm/amd/display: Read DP_SINK_COUNT_ESI range on HPD for DP 1.4

DP 1.4 compliance now requires that registers at DP_SINK_COUNT_ESI range
(0x2002-0x2003, 0x200c-0x200f) are read instead of DP_SINK_COUNT range
(0x200-0x2005.
Signed-off-by: default avatarNikola Cornij <nikola.cornij@amd.com>
Reviewed-by: default avatarTony Cheng <Tony.Cheng@amd.com>
Acked-by: default avatarHarry Wentland <harry.wentland@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent 794550c6
......@@ -1630,17 +1630,42 @@ static enum dc_status read_hpd_rx_irq_data(
struct dc_link *link,
union hpd_irq_data *irq_data)
{
static enum dc_status retval;
/* The HW reads 16 bytes from 200h on HPD,
* but if we get an AUX_DEFER, the HW cannot retry
* and this causes the CTS tests 4.3.2.1 - 3.2.4 to
* fail, so we now explicitly read 6 bytes which is
* the req from the above mentioned test cases.
*
* For DP 1.4 we need to read those from 2002h range.
*/
return core_link_read_dpcd(
if (link->dpcd_caps.dpcd_rev.raw < DPCD_REV_14)
retval = core_link_read_dpcd(
link,
DP_SINK_COUNT,
irq_data->raw,
sizeof(union hpd_irq_data));
else {
/* Read 2 bytes at this location,... */
retval = core_link_read_dpcd(
link,
DP_SINK_COUNT_ESI,
irq_data->raw,
2);
if (retval != DC_OK)
return retval;
/* ... then read remaining 4 at the other location */
retval = core_link_read_dpcd(
link,
DP_LANE0_1_STATUS_ESI,
&irq_data->raw[2],
4);
}
return retval;
}
static bool allow_hpd_rx_irq(const struct dc_link *link)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment