Merge branch 'am65-cpsw-add-taprio-EST-offload-support'
Murali Karicheri says:
====================
am65-cpsw: add taprio/EST offload support
AM65 CPSW h/w supports Enhanced Scheduled Traffic (EST – defined
in P802.1Qbv/D2.2 that later got included in IEEE 802.1Q-2018)
configuration. EST allows express queue traffic to be scheduled
(placed) on the wire at specific repeatable time intervals. In
Linux kernel, EST configuration is done through tc command and
the taprio scheduler in the net core implements a software only
scheduler (SCH_TAPRIO). If the NIC is capable of EST configuration,
user indicate "flag 2" in the command which is then parsed by
taprio scheduler in net core and indicate that the command is to
be offloaded to h/w. taprio then offloads the command to the
driver by calling ndo_setup_tc() ndo ops. This patch implements
ndo_setup_tc() as well as other changes required to offload EST
configuration to CPSW h/w
For more details please refer patch 2/2.
This series is based on original work done by Ivan Khoronzhuk
<ivan.khoronzhuk@linaro.org> to add taprio offload support to
AM65 CPSW 2G.
1. Example configuration 3 Gates
ifconfig eth0 down
ethtool -L eth0 tx 3
ethtool --set-priv-flags eth0 p0-rx-ptype-rrobin off
ifconfig eth0 192.168.2.20
tc qdisc replace dev eth0 parent root handle 100 taprio \
num_tc 3 \
map 0 0 1 2 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 1@1 1@2 \
base-time 0000 \
sched-entry S 4 125000 \
sched-entry S 2 125000 \
sched-entry S 1 250000 \
flags 2
2. Example configuration 8 Gates
ifconfig eth0 down
ethtool -L eth0 tx 8
ethtool --set-priv-flags eth0 p0-rx-ptype-rrobin off
ifconfig eth0 192.168.2.20
tc qdisc replace dev eth0 parent root handle 100 taprio \
num_tc 8 \
map 0 1 2 3 4 5 6 7 0 0 0 0 0 0 0 0 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
base-time 0000 \
sched-entry S 80 125000 \
sched-entry S 40 125000 \
sched-entry S 20 125000 \
sched-entry S 10 125000 \
sched-entry S 08 125000 \
sched-entry S 04 125000 \
sched-entry S 02 125000 \
sched-entry S 01 125000 \
flags 2
Classify frames to particular priority using skbedit so that they land at
a specific queue in cpsw h/w which is Gated by the EST gate which opens based
on the sched-entry.
tc qdisc add dev eth0 clsact
In the below for example an iperf3 session with destination port 5007
will go through Q7.
tc filter add dev eth0 egress protocol ip prio 1 u32 match ip dport 5007 0xffff action skbedit priority 7
tc filter add dev eth0 egress protocol ip prio 1 u32 match ip dport 5006 0xffff action skbedit priority 6
tc filter add dev eth0 egress protocol ip prio 1 u32 match ip dport 5005 0xffff action skbedit priority 5
tc filter add dev eth0 egress protocol ip prio 1 u32 match ip dport 5004 0xffff action skbedit priority 4
tc filter add dev eth0 egress protocol ip prio 1 u32 match ip dport 5003 0xffff action skbedit priority 3
tc filter add dev eth0 egress protocol ip prio 1 u32 match ip dport 5002 0xffff action skbedit priority 2
tc filter add dev eth0 egress protocol ip prio 1 u32 match ip dport 5001 0xffff action skbedit priority 1
iperf3 -c 192.168.2.10 -u -l1470 -b32M -t1 -p 5007
Testing was done by capturing frames at the PC using wireshark and checking for
the bust interval or cycle time of UDP frames with a specific port number.
Verified that the distance between first frame of a burst (cycle-time) is 1
milli second and burst duration is within 125 usec based on the received packet
timestamp shown in wireshark packet display.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Showing
This diff is collapsed.
Please register or sign in to comment