dt-bindings: gpio: gpio-davinci: Convert to json-schema

Convert gpio-davinci dt-binding documentation from txt to yaml format. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

dt-bindings: gpio: gpio-davinci: Convert to json-schema
Convert gpio-davinci dt-binding documentation from txt to yaml format. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
c830b87a · Aswath Govindraju · Bartosz Golaszewski · 6d49b3a0 · 6d49b3a0 · c830b87a
Commit c830b87a authored May 24, 2021 by Aswath Govindraju Committed by Bartosz Golaszewski Jun 21, 2021
3 changed files
--- a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
-Davinci/Keystone GPIO controller bindings
-Required Properties:
- compatible: should be "ti,dm6441-gpio": for Davinci da850 SoCs
-			"ti,keystone-gpio": for Keystone 2 66AK2H/K, 66AK2L,
-						66AK2E SoCs
-			"ti,k2g-gpio", "ti,keystone-gpio": for 66AK2G
-			"ti,am654-gpio", "ti,keystone-gpio": for TI K3 AM654
-			"ti,j721e-gpio", "ti,keystone-gpio": for J721E SoCs
-			"ti,am64-gpio", "ti,keystone-gpio": for AM64 SoCs
- reg: Physical base address of the controller and the size of memory mapped
-       registers.
- gpio-controller : Marks the device node as a gpio controller.
- #gpio-cells : Should be two.
-  - first cell is the pin number
-  - second cell is used to specify optional parameters (unused)
- interrupts: Array of GPIO interrupt number. Only banked or unbanked IRQs are
-	      supported at a time.
- ti,ngpio: The number of GPIO pins supported.
- ti,davinci-gpio-unbanked: The number of GPIOs that have an individual interrupt
-		            line to processor.
- clocks: Should contain the device's input clock, and should be defined as per
-          the appropriate clock bindings consumer usage in,
-          Documentation/devicetree/bindings/clock/keystone-gate.txt
-                            for 66AK2HK/66AK2L/66AK2E SoCs or,
-          Documentation/devicetree/bindings/clock/ti,sci-clk.txt
-                            for 66AK2G SoCs
- clock-names: Name should be "gpio";
-Currently clock-names and clocks are needed for all keystone 2 platforms
-Davinci platforms do not have DT clocks as of now.
-The GPIO controller also acts as an interrupt controller. It uses the default
-two cells specifier as described in Documentation/devicetree/bindings/
-interrupt-controller/interrupts.txt.
-Example:
-gpio: gpio@1e26000 {
-	compatible = "ti,dm6441-gpio";
-	gpio-controller;
-	#gpio-cells = <2>;
-	reg = <0x226000 0x1000>;
-	interrupt-parent = <&intc>;
-	interrupts = <42 IRQ_TYPE_EDGE_BOTH 43 IRQ_TYPE_EDGE_BOTH
-		44 IRQ_TYPE_EDGE_BOTH 45 IRQ_TYPE_EDGE_BOTH
-		46 IRQ_TYPE_EDGE_BOTH 47 IRQ_TYPE_EDGE_BOTH
-		48 IRQ_TYPE_EDGE_BOTH 49 IRQ_TYPE_EDGE_BOTH
-		50 IRQ_TYPE_EDGE_BOTH>;
-	ti,ngpio = <144>;
-	ti,davinci-gpio-unbanked = <0>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
-leds {
-	compatible = "gpio-leds";
-	led1 {
-		label = "davinci:green:usr1";
-		gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
-		...
-	};
-	led2 {
-		label = "davinci:red:debug1";
-		gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
-		...
-	};
-};
-Example for 66AK2G:
-gpio0: gpio@2603000 {
-	compatible = "ti,k2g-gpio", "ti,keystone-gpio";
-	reg = <0x02603000 0x100>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	ti,ngpio = <144>;
-	ti,davinci-gpio-unbanked = <0>;
-	clocks = <&k2g_clks 0x001b 0x0>;
-	clock-names = "gpio";
-};
-Example for 66AK2HK/66AK2L/66AK2E:
-gpio0: gpio@260bf00 {
-	compatible = "ti,keystone-gpio";
-	reg = <0x0260bf00 0x100>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	/* HW Interrupts mapped to GPIO pins */
-	interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 121 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 123 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 124 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 140 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 142 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 143 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 144 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 146 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 147 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 148 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 150 IRQ_TYPE_EDGE_RISING>,
-			<GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&clkgpio>;
-	clock-names = "gpio";
-	ti,ngpio = <32>;
-	ti,davinci-gpio-unbanked = <32>;
-};
-Example for K3 AM654:
-wkup_gpio0: wkup_gpio0@42110000 {
-	compatible = "ti,am654-gpio", "ti,keystone-gpio";
-	reg = <0x42110000 0x100>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-parent = <&intr_wkup_gpio>;
-	interrupts = <59 128>, <59 129>, <59 130>, <59 131>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	ti,ngpio = <56>;
-	ti,davinci-gpio-unbanked = <0>;
-	clocks = <&k3_clks 59 0>;
-	clock-names = "gpio";
-};
--- a/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-davinci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: GPIO controller for Davinci and keystone devices
+maintainers:
+  - Keerthy <j-keerthy@ti.com>
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,k2g-gpio
+              - ti,am654-gpio
+              - ti,j721e-gpio
+              - ti,am64-gpio
+          - const: ti,keystone-gpio
+      - items:
+          - enum:
+              - ti,dm6441-gpio
+              - ti,keystone-gpio
+  reg:
+    maxItems: 1
+  gpio-controller: true
+  gpio-ranges: true
+  gpio-line-names:
+    description: strings describing the names of each gpio line.
+    minItems: 1
+    maxItems: 100
+  "#gpio-cells":
+    const: 2
+    description:
+      first cell is the pin number and second cell is used to specify optional parameters (unused).
+  interrupts:
+    description:
+      The interrupts are specified as per the interrupt parent. Only banked
+      or unbanked IRQs are supported at a time. If the interrupts are
+      banked then provide list of interrupts corresponding to each bank, else
+      provide the list of interrupts for each gpio.
+    minItems: 1
+    maxItems: 100
+  ti,ngpio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The number of GPIO pins supported consecutively.
+    minimum: 1
+  ti,davinci-gpio-unbanked:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The number of GPIOs that have an individual interrupt line to processor.
+    minimum: 0
+  clocks:
+    maxItems: 1
+  clock-names:
+    const: gpio
+  interrupt-controller: true
+  power-domains:
+    maxItems: 1
+  "#interrupt-cells":
+    const: 2
+patternProperties:
+  "^(.+-hog(-[0-9]+)?)$":
+    type: object
+    required:
+      - gpio-hog
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupts
+  - ti,ngpio
+  - ti,davinci-gpio-unbanked
+  - clocks
+  - clock-names
+additionalProperties: false
+examples:
+  - |
+    #include<dt-bindings/interrupt-controller/arm-gic.h>
+    gpio0: gpio@2603000 {
+      compatible = "ti,k2g-gpio", "ti,keystone-gpio";
+      reg = <0x02603000 0x100>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      ti,ngpio = <144>;
+      ti,davinci-gpio-unbanked = <0>;
+      clocks = <&k2g_clks 0x001b 0x0>;
+      clock-names = "gpio";
+    };
+  - |
+    #include<dt-bindings/interrupt-controller/arm-gic.h>
+    gpio1: gpio@260bf00 {
+      compatible = "ti,keystone-gpio";
+      reg = <0x0260bf00 0x100>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      /* HW Interrupts mapped to GPIO pins */
+      interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 121 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 124 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 147 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
+      clocks = <&clkgpio>;
+      clock-names = "gpio";
+      ti,ngpio = <32>;
+      ti,davinci-gpio-unbanked = <32>;
+    };
+  - |
+    wkup_gpio0: gpio0@42110000 {
+      compatible = "ti,am654-gpio", "ti,keystone-gpio";
+      reg = <0x42110000 0x100>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupt-parent = <&intr_wkup_gpio>;
+      interrupts = <60>, <61>, <62>, <63>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      ti,ngpio = <56>;
+      ti,davinci-gpio-unbanked = <0>;
+      clocks = <&k3_clks 59 0>;
+      clock-names = "gpio";
+    };
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18250,7 +18250,7 @@ TI DAVINCI SERIES GPIO DRIVER
 M:	Keerthy <j-keerthy@ti.com>
 L:	linux-gpio@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/gpio/gpio-davinci.txt
+F:	Documentation/devicetree/bindings/gpio/gpio-davinci.yaml
 F:	drivers/gpio/gpio-davinci.c
 TI DAVINCI SERIES MEDIA DRIVER