drivers: thermal: tsens: Move get_temp_tsens_v2 to allow sharing

Just rename the function and move it to allow code sharing with future
versions of TSENS IP
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

drivers/thermal/qcom/tsens-common.c

@@ -102,6 +102,41 @@ static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
 	return degc;
 }
 
+int get_temp_tsens_valid(struct tsens_priv *priv, int i, int *temp)
+{
+	struct tsens_sensor *s = &priv->sensor[i];
+	u32 temp_idx = LAST_TEMP_0 + s->hw_id;
+	u32 valid_idx = VALID_0 + s->hw_id;
+	u32 last_temp = 0, valid, mask;
+	int ret;
+
+	ret = regmap_field_read(priv->rf[valid_idx], &valid);
+	if (ret)
+		return ret;
+	while (!valid) {
+		/* Valid bit is 0 for 6 AHB clock cycles.
+		 * At 19.2MHz, 1 AHB clock is ~60ns.
+		 * We should enter this loop very, very rarely.
+		 */
+		ndelay(400);
+		ret = regmap_field_read(priv->rf[valid_idx], &valid);
+		if (ret)
+			return ret;
+	}
+
+	/* Valid bit is set, OK to read the temperature */
+	ret = regmap_field_read(priv->rf[temp_idx], &last_temp);
+	if (ret)
+		return ret;
+
+	mask = GENMASK(priv->fields[LAST_TEMP_0].msb,
+		       priv->fields[LAST_TEMP_0].lsb);
+	/* Convert temperature from deciCelsius to milliCelsius */
+	*temp = sign_extend32(last_temp, fls(mask) - 1) * 100;
+
+	return 0;
+}
+
 int get_temp_common(struct tsens_priv *priv, int i, int *temp)
 {
 	struct tsens_sensor *s = &priv->sensor[i];

drivers/thermal/qcom/tsens-v2.c

@@ -25,41 +25,6 @@
 #define TM_Sn_STATUS_OFF		0x00a0
 #define TM_TRDY_OFF			0x00e4
 
-static int get_temp_tsens_v2(struct tsens_priv *priv, int i, int *temp)
-{
-	struct tsens_sensor *s = &priv->sensor[i];
-	u32 temp_idx = LAST_TEMP_0 + s->hw_id;
-	u32 valid_idx = VALID_0 + s->hw_id;
-	u32 last_temp = 0, valid, mask;
-	int ret;
-
-	ret = regmap_field_read(priv->rf[valid_idx], &valid);
-	if (ret)
-		return ret;
-	while (!valid) {
-		/* Valid bit is 0 for 6 AHB clock cycles.
-		 * At 19.2MHz, 1 AHB clock is ~60ns.
-		 * We should enter this loop very, very rarely.
-		 */
-		ndelay(400);
-		ret = regmap_field_read(priv->rf[valid_idx], &valid);
-		if (ret)
-			return ret;
-	}
-
-	/* Valid bit is set, OK to read the temperature */
-	ret = regmap_field_read(priv->rf[temp_idx], &last_temp);
-	if (ret)
-		return ret;
-
-	mask = GENMASK(priv->fields[LAST_TEMP_0].msb,
-		       priv->fields[LAST_TEMP_0].lsb);
-	/* Convert temperature from deciCelsius to milliCelsius */
-	*temp = sign_extend32(last_temp, fls(mask) - 1) * 100;
-
-	return 0;
-}
-
 /* v2.x: 8996, 8998, sdm845 */
 
 static const struct tsens_features tsens_v2_feat = {
@@ -101,7 +66,7 @@ static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {
 
 static const struct tsens_ops ops_generic_v2 = {
 	.init		= init_common,
-	.get_temp	= get_temp_tsens_v2,
+	.get_temp	= get_temp_tsens_valid,
 };
 
 const struct tsens_plat_data data_tsens_v2 = {

drivers/thermal/qcom/tsens.h

@@ -308,6 +308,7 @@ struct tsens_priv {
 char *qfprom_read(struct device *dev, const char *cname);
 void compute_intercept_slope(struct tsens_priv *priv, u32 *pt1, u32 *pt2, u32 mode);
 int init_common(struct tsens_priv *priv);
+int get_temp_tsens_valid(struct tsens_priv *priv, int i, int *temp);
 int get_temp_common(struct tsens_priv *priv, int i, int *temp);
 bool is_sensor_enabled(struct tsens_priv *priv, u32 hw_id);