Skip to content

L
linux
Commit c8dc801d authored by Jean Tourrilhes's avatar Jean Tourrilhes Committed by Linus Torvalds
Browse files
Options

irda update 2/6: 

                <Following patch from Martin Lucina & Christian Gennerat>
        o [FEATURE] Rewrite of the toshoboe driver using documentation
        o [FEATURE] Support Donau oboe chipsets.
        o [FEATURE] FIR support
        o [CORRECT] Probe chip before opening
        o [FEATURE] suspend/resume support
        o [FEATURE] Numerous other improvements/cleanups
        o [CORRECT] (me) Remove save_flags()/cli() for spinlock
                <Currently, we keep the old toshoboe driver around>
        o [FEATURE] Config.help for ma600 driver (unrelated ;-)
parent 644f894a
Hide whitespace changes
Inline Side-by-side
Showing with 2245 additions and 5 deletions
drivers/net/irda/Config.help
View file @ c8dc801d
...@@ -55,12 +55,22 @@ CONFIG_NSC_FIR ...@@ -55,12 +55,22 @@ CONFIG_NSC_FIR
<file:Documentation/modules.txt>. The module will be called <file:Documentation/modules.txt>. The module will be called
nsc-ircc.o. nsc-ircc.o.
CONFIG_TOSHIBA_FIR CONFIG_TOSHIBA_OLD
Say Y here if you want to build support for the Toshiba Type-O IR Say Y here if you want to build support for the Toshiba Type-O IR
chipset. This chipset is used by the Toshiba Libretto 100CT, and chipset. This chipset is used by the Toshiba Libretto 100CT, and
many more laptops. If you want to compile it as a module, say M many more laptops. This driver is obsolete, will no more be
here and read <file:Documentation/modules.txt>. The module will be maintained and will be removed in favor of the new driver.
called toshoboe.o. If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>.
The module will be called toshoboe.o.
CONFIG_TOSHIBA_FIR
Say Y here if you want to build support for the Toshiba Type-O IR
and Donau oboe chipsets. These chipsets are used by the Toshiba
Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>.
The module will be called donauboe.o.
CONFIG_SMC_IRCC_FIR CONFIG_SMC_IRCC_FIR
Say Y here if you want to build support for the SMC Infrared Say Y here if you want to build support for the SMC Infrared
...@@ -165,3 +175,18 @@ CONFIG_ACT200L_DONGLE ...@@ -165,3 +175,18 @@ CONFIG_ACT200L_DONGLE
the normal 9-pin serial port connector, and can currently only be the normal 9-pin serial port connector, and can currently only be
used by IrTTY. To activate support for ACTiSYS IR-200L dongles used by IrTTY. To activate support for ACTiSYS IR-200L dongles
you will have to start irattach like this: "irattach -d act200l". you will have to start irattach like this: "irattach -d act200l".
Mobile Action MA600 dongle (Experimental)
CONFIG_MA600_DONGLE
Say Y here if you want to build support for the Mobile Action MA600
dongle. If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt>. The MA600 dongle attaches to
the normal 9-pin serial port connector, and can currently only be
tested on IrCOMM. To activate support for MA600 dongles you will
have to insert "irattach -d ma600" in the /etc/irda/drivers script.
Note: irutils 0.9.15 requires no modification. irutils 0.9.9 needs
modification. For more information, download the following tar gzip
file.
There is a pre-compiled module on
<http://engsvr.ust.hk/~eetwl95/download/ma600-2.4.x.tar.gz>
drivers/net/irda/Config.in
View file @ c8dc801d
...@@ -28,6 +28,7 @@ comment 'FIR device drivers' ...@@ -28,6 +28,7 @@ comment 'FIR device drivers'
dep_tristate 'IrDA USB dongles (EXPERIMENTAL)' CONFIG_USB_IRDA $CONFIG_IRDA $CONFIG_USB $CONFIG_EXPERIMENTAL dep_tristate 'IrDA USB dongles (EXPERIMENTAL)' CONFIG_USB_IRDA $CONFIG_IRDA $CONFIG_USB $CONFIG_EXPERIMENTAL
dep_tristate 'NSC PC87108/PC87338' CONFIG_NSC_FIR $CONFIG_IRDA dep_tristate 'NSC PC87108/PC87338' CONFIG_NSC_FIR $CONFIG_IRDA
dep_tristate 'Winbond W83977AF (IR)' CONFIG_WINBOND_FIR $CONFIG_IRDA dep_tristate 'Winbond W83977AF (IR)' CONFIG_WINBOND_FIR $CONFIG_IRDA
dep_tristate 'Toshiba Type-O IR Port (old driver)' CONFIG_TOSHIBA_OLD $CONFIG_IRDA
dep_tristate 'Toshiba Type-O IR Port' CONFIG_TOSHIBA_FIR $CONFIG_IRDA dep_tristate 'Toshiba Type-O IR Port' CONFIG_TOSHIBA_FIR $CONFIG_IRDA
if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
dep_tristate 'SMC IrCC (EXPERIMENTAL)' CONFIG_SMC_IRCC_FIR $CONFIG_IRDA dep_tristate 'SMC IrCC (EXPERIMENTAL)' CONFIG_SMC_IRCC_FIR $CONFIG_IRDA
......
drivers/net/irda/Makefile
View file @ c8dc801d
...@@ -13,7 +13,8 @@ obj-$(CONFIG_USB_IRDA) += irda-usb.o ...@@ -13,7 +13,8 @@ obj-$(CONFIG_USB_IRDA) += irda-usb.o
obj-$(CONFIG_NSC_FIR) += nsc-ircc.o obj-$(CONFIG_NSC_FIR) += nsc-ircc.o
obj-$(CONFIG_WINBOND_FIR) += w83977af_ir.o obj-$(CONFIG_WINBOND_FIR) += w83977af_ir.o
obj-$(CONFIG_SA1100_FIR) += sa1100_ir.o obj-$(CONFIG_SA1100_FIR) += sa1100_ir.o
obj-$(CONFIG_TOSHIBA_FIR) += toshoboe.o obj-$(CONFIG_TOSHIBA_OLD) += toshoboe.o
obj-$(CONFIG_TOSHIBA_FIR) += donauboe.o
obj-$(CONFIG_SMC_IRCC_FIR) += smc-ircc.o irport.o obj-$(CONFIG_SMC_IRCC_FIR) += smc-ircc.o irport.o
obj-$(CONFIG_ALI_FIR) += ali-ircc.o obj-$(CONFIG_ALI_FIR) += ali-ircc.o
obj-$(CONFIG_VLSI_FIR) += vlsi_ir.o obj-$(CONFIG_VLSI_FIR) += vlsi_ir.o
......
drivers/net/irda/donauboe.c 0 → 100644
View file @ c8dc801d
/*****************************************************************
*
* Filename: donauboe.c
* Version: 2.17
* Description: Driver for the Toshiba OBOE (or type-O or 701)
* FIR Chipset, also supports the DONAUOBOE (type-DO
* or d01) FIR chipset which as far as I know is
* register compatible.
* Status: Experimental.
* Author: James McKenzie <james@fishsoup.dhs.org>
* Created at: Sat May 8 12:35:27 1999
* Modified: Paul Bristow <paul.bristow@technologist.com>
* Modified: Mon Nov 11 19:10:05 1999
* Modified: James McKenzie <james@fishsoup.dhs.org>
* Modified: Thu Mar 16 12:49:00 2000 (Substantial rewrite)
* Modified: Sat Apr 29 00:23:03 2000 (Added DONAUOBOE support)
* Modified: Wed May 24 23:45:02 2000 (Fixed chipio_t structure)
* Modified: 2.13 Christian Gennerat <christian.gennerat@polytechnique.org>
* Modified: 2.13 dim jan 07 21:57:39 2001 (tested with kernel 2.4 & irnet/ppp)
* Modified: 2.14 Christian Gennerat <christian.gennerat@polytechnique.org>
* Modified: 2.14 lun fev 05 17:55:59 2001 (adapted to patch-2.4.1-pre8-irda1)
* Modified: 2.15 Martin Lucina <mato@kotelna.sk>
* Modified: 2.15 Fri Jun 21 20:40:59 2002 (sync with 2.4.18, substantial fixes)
* Modified: 2.16 Martin Lucina <mato@kotelna.sk>
* Modified: 2.16 Sat Jun 22 18:54:29 2002 (fix freeregion, default to verbose)
* Modified: 2.17 Christian Gennerat <christian.gennerat@polytechnique.org>
* Modified: 2.17 jeu sep 12 08:50:20 2002 (save_flags();cli(); replaced by spinlocks)
*
* Copyright (c) 1999 James McKenzie, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* Neither James McKenzie nor Cambridge University admit liability nor
* provide warranty for any of this software. This material is
* provided "AS-IS" and at no charge.
*
* Applicable Models : Libretto 100/110CT and many more.
* Toshiba refers to this chip as the type-O IR port,
* or the type-DO IR port.
*
********************************************************************/
/* Look at toshoboe.h (currently in include/net/irda) for details of */
/* Where to get documentation on the chip */
static char *rcsid =
"$Id: donauboe.c V2.17 jeu sep 12 08:50:20 2002 $";
/* See below for a description of the logic in this driver */
/* Is irda_crc16_table[] exported? not yet */
/* define this if you get errors about multiple defns of irda_crc16_table */
#undef CRC_EXPORTED
/* User servicable parts */
/* Enable the code which probes the chip and does a few tests */
/* Probe code is very useful for understanding how the hardware works */
/* Use it with various combinations of TT_LEN, RX_LEN */
/* Strongly recomended, disable if the probe fails on your machine */
/* and send me <james@fishsoup.dhs.org> the output of dmesg */
#define DO_PROBE 1
/* Trace Transmit ring, interrupts, Receive ring or not ? */
#define PROBE_VERBOSE 1
/* Debug option, examine sent and received raw data */
/* Irdadump is better, but does not see all packets. enable it if you want. */
#undef DUMP_PACKETS
/* MIR mode has not been tested. Some behaviour is different */
/* Seems to work against an Ericsson R520 for me. -Martin */
#define USE_MIR
/* Schedule back to back hardware transmits wherever possible, otherwise */
/* we need an interrupt for every frame, unset if oboe works for a bit and */
/* then hangs */
#define OPTIMIZE_TX
/* Set the number of slots in the rings */
/* If you get rx/tx fifo overflows at high bitrates, you can try increasing */
/* these */
#define RING_SIZE (OBOE_RING_SIZE_RX8 | OBOE_RING_SIZE_TX8)
#define TX_SLOTS 8
#define RX_SLOTS 8
/* Less user servicable parts below here */
/* Test, Transmit and receive buffer sizes, adjust at your peril */
/* remarks: nfs usually needs 1k blocks */
/* remarks: in SIR mode, CRC is received, -> RX_LEN=TX_LEN+2 */
/* remarks: test accepts large blocks. Standard is 0x80 */
/* When TT_LEN > RX_LEN (SIR mode) data is stored in successive slots. */
/* When 3 or more slots are needed for each test packet, */
/* data received in the first slots is overwritten, even */
/* if OBOE_CTL_RX_HW_OWNS is not set, without any error! */
#define TT_LEN 0x80
#define TX_LEN 0xc00
#define RX_LEN 0xc04
/* Real transmitted length (SIR mode) is about 14+(2%*TX_LEN) more */
/* long than user-defined length (see async_wrap_skb) and is less then 4K */
/* Real received length is (max RX_LEN) differs from user-defined */
/* length only b the CRC (2 or 4 bytes) */
#define BUF_SAFETY 0x7a
#define RX_BUF_SZ (RX_LEN)
#define TX_BUF_SZ (TX_LEN+BUF_SAFETY)
/* Logic of the netdev part of this driver */
/* The RX ring is filled with buffers, when a packet arrives */
/* it is DMA'd into the buffer which is marked used and RxDone called */
/* RxDone forms an skb (and checks the CRC if in SIR mode) and ships */
/* the packet off upstairs */
/* The transmitter on the oboe chip can work in one of two modes */
/* for each ring->tx[] the transmitter can either */
/* a) transmit the packet, leave the trasmitter enabled and proceed to */
/* the next ring */
/* OR */
/* b) transmit the packet, switch off the transmitter and issue TxDone */
/* All packets are entered into the ring in mode b), if the ring was */
/* empty the transmitter is started. */
/* If OPTIMIZE_TX is defined then in TxDone if the ring contains */
/* more than one packet, all but the last are set to mode a) [HOWEVER */
/* the hardware may not notice this, this is why we start in mode b) ] */
/* then restart the transmitter */
/* If OPTIMIZE_TX is not defined then we just restart the transmitter */
/* if the ring isn't empty */
/* Speed changes are delayed until the TxRing is empty */
/* mtt is handled by generating packets with bad CRCs, before the data */
/* TODO: */
/* check the mtt works ok */
/* finish the watchdog */
/* No user servicable parts below here */
#define STATIC static
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/rtnetlink.h>
#include <asm/system.h>
#include <asm/io.h>
#include <net/irda/wrapper.h>
#include <net/irda/irda.h>
//#include <net/irda/irmod.h>
//#include <net/irda/irlap_frame.h>
#include <net/irda/irda_device.h>
#include <net/irda/crc.h>
#include "donauboe.h"
#define INB(port) inb_p(port)
#define OUTB(val,port) outb_p(val,port)
#define OUTBP(val,port) outb_p(val,port)
#define PROMPT OUTB(OBOE_PROMPT_BIT,OBOE_PROMPT);
#if PROBE_VERBOSE
#define PROBE_DEBUG(args...) (printk (args))
#else
#define PROBE_DEBUG(args...) ;
#endif
/* Set the DMA to be byte at a time */
#define CONFIG0H_DMA_OFF OBOE_CONFIG0H_RCVANY
#define CONFIG0H_DMA_ON_NORX CONFIG0H_DMA_OFF| OBOE_CONFIG0H_ENDMAC
#define CONFIG0H_DMA_ON CONFIG0H_DMA_ON_NORX | OBOE_CONFIG0H_ENRX
static struct pci_device_id toshoboe_pci_tbl[] __initdata = {
{ PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_FIR701, PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_FIRD01, PCI_ANY_ID, PCI_ANY_ID, },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(pci, toshoboe_pci_tbl);
#define DRIVER_NAME "toshoboe"
static char *driver_name = DRIVER_NAME;
static int max_baud = 4000000;
static int do_probe = DO_PROBE;
/**********************************************************************/
/* Fcs code */
#ifdef CRC_EXPORTED
extern __u16 const irda_crc16_table[];
#else
static __u16 const irda_crc16_table[256] = {
0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7,
0x1081, 0x0108, 0x3393, 0x221a, 0x56a5, 0x472c, 0x75b7, 0x643e,
0x9cc9, 0x8d40, 0xbfdb, 0xae52, 0xdaed, 0xcb64, 0xf9ff, 0xe876,
0x2102, 0x308b, 0x0210, 0x1399, 0x6726, 0x76af, 0x4434, 0x55bd,
0xad4a, 0xbcc3, 0x8e58, 0x9fd1, 0xeb6e, 0xfae7, 0xc87c, 0xd9f5,
0x3183, 0x200a, 0x1291, 0x0318, 0x77a7, 0x662e, 0x54b5, 0x453c,
0xbdcb, 0xac42, 0x9ed9, 0x8f50, 0xfbef, 0xea66, 0xd8fd, 0xc974,
0x4204, 0x538d, 0x6116, 0x709f, 0x0420, 0x15a9, 0x2732, 0x36bb,
0xce4c, 0xdfc5, 0xed5e, 0xfcd7, 0x8868, 0x99e1, 0xab7a, 0xbaf3,
0x5285, 0x430c, 0x7197, 0x601e, 0x14a1, 0x0528, 0x37b3, 0x263a,
0xdecd, 0xcf44, 0xfddf, 0xec56, 0x98e9, 0x8960, 0xbbfb, 0xaa72,
0x6306, 0x728f, 0x4014, 0x519d, 0x2522, 0x34ab, 0x0630, 0x17b9,
0xef4e, 0xfec7, 0xcc5c, 0xddd5, 0xa96a, 0xb8e3, 0x8a78, 0x9bf1,
0x7387, 0x620e, 0x5095, 0x411c, 0x35a3, 0x242a, 0x16b1, 0x0738,
0xffcf, 0xee46, 0xdcdd, 0xcd54, 0xb9eb, 0xa862, 0x9af9, 0x8b70,
0x8408, 0x9581, 0xa71a, 0xb693, 0xc22c, 0xd3a5, 0xe13e, 0xf0b7,
0x0840, 0x19c9, 0x2b52, 0x3adb, 0x4e64, 0x5fed, 0x6d76, 0x7cff,
0x9489, 0x8500, 0xb79b, 0xa612, 0xd2ad, 0xc324, 0xf1bf, 0xe036,
0x18c1, 0x0948, 0x3bd3, 0x2a5a, 0x5ee5, 0x4f6c, 0x7df7, 0x6c7e,
0xa50a, 0xb483, 0x8618, 0x9791, 0xe32e, 0xf2a7, 0xc03c, 0xd1b5,
0x2942, 0x38cb, 0x0a50, 0x1bd9, 0x6f66, 0x7eef, 0x4c74, 0x5dfd,
0xb58b, 0xa402, 0x9699, 0x8710, 0xf3af, 0xe226, 0xd0bd, 0xc134,
0x39c3, 0x284a, 0x1ad1, 0x0b58, 0x7fe7, 0x6e6e, 0x5cf5, 0x4d7c,
0xc60c, 0xd785, 0xe51e, 0xf497, 0x8028, 0x91a1, 0xa33a, 0xb2b3,
0x4a44, 0x5bcd, 0x6956, 0x78df, 0x0c60, 0x1de9, 0x2f72, 0x3efb,
0xd68d, 0xc704, 0xf59f, 0xe416, 0x90a9, 0x8120, 0xb3bb, 0xa232,
0x5ac5, 0x4b4c, 0x79d7, 0x685e, 0x1ce1, 0x0d68, 0x3ff3, 0x2e7a,
0xe70e, 0xf687, 0xc41c, 0xd595, 0xa12a, 0xb0a3, 0x8238, 0x93b1,
0x6b46, 0x7acf, 0x4854, 0x59dd, 0x2d62, 0x3ceb, 0x0e70, 0x1ff9,
0xf78f, 0xe606, 0xd49d, 0xc514, 0xb1ab, 0xa022, 0x92b9, 0x8330,
0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78
};
#endif
STATIC int
toshoboe_checkfcs (unsigned char *buf, int len)
{
int i;
union
{
__u16 value;
__u8 bytes[2];
}
fcs;
fcs.value = INIT_FCS;
for (i = 0; i < len; ++i)
fcs.value = irda_fcs (fcs.value, *(buf++));
return (fcs.value == GOOD_FCS);
}
/***********************************************************************/
/* Generic chip handling code */
#ifdef DUMP_PACKETS
static unsigned char dump[50];
STATIC void
_dumpbufs (unsigned char *data, int len, char tete)
{
int i,j;
char head=tete;
for (i=0;i<len;i+=16) {
for (j=0;j<16 && i+j<len;j++) { sprintf(&dump[3*j],"%02x.",data[i+j]); }
dump [3*j]=0;
IRDA_DEBUG (2, "%c%s\n",head , dump);
head='+';
}
}
#endif
/* Dump the registers */
STATIC void
toshoboe_dumpregs (struct toshoboe_cb *self)
{
__u32 ringbase;
IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
ringbase = INB (OBOE_RING_BASE0) << 10;
ringbase |= INB (OBOE_RING_BASE1) << 18;
ringbase |= INB (OBOE_RING_BASE2) << 26;
printk (KERN_ERR DRIVER_NAME ": Register dump:\n");
printk (KERN_ERR "Interrupts: Tx:%d Rx:%d TxUnder:%d RxOver:%d Sip:%d\n",
self->int_tx, self->int_rx, self->int_txunder, self->int_rxover,
self->int_sip);
printk (KERN_ERR "RX %02x TX %02x RingBase %08x\n",
INB (OBOE_RXSLOT), INB (OBOE_TXSLOT), ringbase);
printk (KERN_ERR "RING_SIZE %02x IER %02x ISR %02x\n",
INB (OBOE_RING_SIZE), INB (OBOE_IER), INB (OBOE_ISR));
printk (KERN_ERR "CONFIG1 %02x STATUS %02x\n",
INB (OBOE_CONFIG1), INB (OBOE_STATUS));
printk (KERN_ERR "CONFIG0 %02x%02x ENABLE %02x%02x\n",
INB (OBOE_CONFIG0H), INB (OBOE_CONFIG0L),
INB (OBOE_ENABLEH), INB (OBOE_ENABLEL));
printk (KERN_ERR "NEW_PCONFIG %02x%02x CURR_PCONFIG %02x%02x\n",
INB (OBOE_NEW_PCONFIGH), INB (OBOE_NEW_PCONFIGL),
INB (OBOE_CURR_PCONFIGH), INB (OBOE_CURR_PCONFIGL));
printk (KERN_ERR "MAXLEN %02x%02x RXCOUNT %02x%02x\n",
INB (OBOE_MAXLENH), INB (OBOE_MAXLENL),
INB (OBOE_RXCOUNTL), INB (OBOE_RXCOUNTH));
if (self->ring)
{
int i;
ringbase = virt_to_bus (self->ring);
printk (KERN_ERR "Ring at %08x:\n", ringbase);
printk (KERN_ERR "RX:");
for (i = 0; i < RX_SLOTS; ++i)
printk (" (%d,%02x)",self->ring->rx[i].len,self->ring->rx[i].control);
printk ("\n");
printk (KERN_ERR "TX:");
for (i = 0; i < RX_SLOTS; ++i)
printk (" (%d,%02x)",self->ring->tx[i].len,self->ring->tx[i].control);
printk ("\n");
}
}
/*Don't let the chip look at memory */
STATIC void
toshoboe_disablebm (struct toshoboe_cb *self)
{
__u8 command;
IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
pci_read_config_byte (self->pdev, PCI_COMMAND, &command);
command &= ~PCI_COMMAND_MASTER;
pci_write_config_byte (self->pdev, PCI_COMMAND, command);
}
/* Shutdown the chip and point the taskfile reg somewhere else */
STATIC void
toshoboe_stopchip (struct toshoboe_cb *self)
{
IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
/*Disable interrupts */
OUTB (0x0, OBOE_IER);
/*Disable DMA, Disable Rx, Disable Tx */
OUTB (CONFIG0H_DMA_OFF, OBOE_CONFIG0H);
/*Disable SIR MIR FIR, Tx and Rx */
OUTB (0x00, OBOE_ENABLEH);
/*Point the ring somewhere safe */
OUTB (0x3f, OBOE_RING_BASE2);
OUTB (0xff, OBOE_RING_BASE1);
OUTB (0xff, OBOE_RING_BASE0);
OUTB (RX_LEN >> 8, OBOE_MAXLENH);
OUTB (RX_LEN & 0xff, OBOE_MAXLENL);
/*Acknoledge any pending interrupts */
OUTB (0xff, OBOE_ISR);
/*Why */
OUTB (OBOE_ENABLEH_PHYANDCLOCK, OBOE_ENABLEH);
/*switch it off */
OUTB (OBOE_CONFIG1_OFF, OBOE_CONFIG1);
toshoboe_disablebm (self);
}
/* Transmitter initialization */
STATIC void
toshoboe_start_DMA (struct toshoboe_cb *self, int opts)
{
OUTB (0x0, OBOE_ENABLEH);
OUTB (CONFIG0H_DMA_ON | opts, OBOE_CONFIG0H);
OUTB (OBOE_ENABLEH_PHYANDCLOCK, OBOE_ENABLEH);
PROMPT;
}
/*Set the baud rate */
STATIC void
toshoboe_setbaud (struct toshoboe_cb *self)
{
__u16 pconfig = 0;
__u8 config0l = 0;
IRDA_DEBUG (2, "%s(%d/%d)\n", __FUNCTION__, self->speed, self->io.speed);
switch (self->speed)
{
case 2400:
case 4800:
case 9600:
case 19200:
case 38400:
case 57600:
case 115200:
#ifdef USE_MIR
case 1152000:
#endif
case 4000000:
break;
default:
printk (KERN_ERR DRIVER_NAME ": switch to unsupported baudrate %d\n",
self->speed);
return;
}
switch (self->speed)
{
/* For SIR the preamble is done by adding XBOFs */
/* to the packet */
/* set to filtered SIR mode, filter looks for BOF and EOF */
case 2400:
pconfig |= 47 << OBOE_PCONFIG_BAUDSHIFT;
pconfig |= 25 << OBOE_PCONFIG_WIDTHSHIFT;
break;
case 4800:
pconfig |= 23 << OBOE_PCONFIG_BAUDSHIFT;
pconfig |= 25 << OBOE_PCONFIG_WIDTHSHIFT;
break;
case 9600:
pconfig |= 11 << OBOE_PCONFIG_BAUDSHIFT;
pconfig |= 25 << OBOE_PCONFIG_WIDTHSHIFT;
break;
case 19200:
pconfig |= 5 << OBOE_PCONFIG_BAUDSHIFT;
pconfig |= 25 << OBOE_PCONFIG_WIDTHSHIFT;
break;
case 38400:
pconfig |= 2 << OBOE_PCONFIG_BAUDSHIFT;
pconfig |= 25 << OBOE_PCONFIG_WIDTHSHIFT;
break;
case 57600:
pconfig |= 1 << OBOE_PCONFIG_BAUDSHIFT;
pconfig |= 25 << OBOE_PCONFIG_WIDTHSHIFT;
break;
case 115200:
pconfig |= 0 << OBOE_PCONFIG_BAUDSHIFT;
pconfig |= 25 << OBOE_PCONFIG_WIDTHSHIFT;
break;
default:
/*Set to packet based reception */
OUTB (RX_LEN >> 8, OBOE_MAXLENH);
OUTB (RX_LEN & 0xff, OBOE_MAXLENL);
break;
}
switch (self->speed)
{
case 2400:
case 4800:
case 9600:
case 19200:
case 38400:
case 57600:
case 115200:
config0l = OBOE_CONFIG0L_ENSIR;
if (self->async)
{
/*Set to character based reception */
/*System will lock if MAXLEN=0 */
/*so have to be careful */
OUTB (0x01, OBOE_MAXLENH);
OUTB (0x01, OBOE_MAXLENL);
OUTB (0x00, OBOE_MAXLENH);
}
else
{
/*Set to packet based reception */
config0l |= OBOE_CONFIG0L_ENSIRF;
OUTB (RX_LEN >> 8, OBOE_MAXLENH);
OUTB (RX_LEN & 0xff, OBOE_MAXLENL);
}
break;
#ifdef USE_MIR
/* MIR mode */
/* Set for 16 bit CRC and enable MIR */
/* Preamble now handled by the chip */
case 1152000:
pconfig |= 0 << OBOE_PCONFIG_BAUDSHIFT;
pconfig |= 8 << OBOE_PCONFIG_WIDTHSHIFT;
pconfig |= 1 << OBOE_PCONFIG_PREAMBLESHIFT;
config0l = OBOE_CONFIG0L_CRC16 | OBOE_CONFIG0L_ENMIR;
break;
#endif
/* FIR mode */
/* Set for 32 bit CRC and enable FIR */
/* Preamble handled by the chip */
case 4000000:
pconfig |= 0 << OBOE_PCONFIG_BAUDSHIFT;
/* Documentation says 14, but toshiba use 15 in their drivers */
pconfig |= 15 << OBOE_PCONFIG_PREAMBLESHIFT;
config0l = OBOE_CONFIG0L_ENFIR;
break;
}
/* Copy into new PHY config buffer */
OUTBP (pconfig >> 8, OBOE_NEW_PCONFIGH);
OUTB (pconfig & 0xff, OBOE_NEW_PCONFIGL);
OUTB (config0l, OBOE_CONFIG0L);
/* Now make OBOE copy from new PHY to current PHY */
OUTB (0x0, OBOE_ENABLEH);
OUTB (OBOE_ENABLEH_PHYANDCLOCK, OBOE_ENABLEH);
PROMPT;
/* speed change executed */
self->new_speed = 0;
self->io.speed = self->speed;
}
/*Let the chip look at memory */
STATIC void
toshoboe_enablebm (struct toshoboe_cb *self)
{
IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
pci_set_master (self->pdev);
}
/*setup the ring */
STATIC void
toshoboe_initring (struct toshoboe_cb *self)
{
int i;
IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
for (i = 0; i < TX_SLOTS; ++i)
{
self->ring->tx[i].len = 0;
self->ring->tx[i].control = 0x00;
self->ring->tx[i].address = virt_to_bus (self->tx_bufs[i]);
}
for (i = 0; i < RX_SLOTS; ++i)
{
self->ring->rx[i].len = RX_LEN;
self->ring->rx[i].len = 0;
self->ring->rx[i].address = virt_to_bus (self->rx_bufs[i]);
self->ring->rx[i].control = OBOE_CTL_RX_HW_OWNS;
}
}
STATIC void
toshoboe_resetptrs (struct toshoboe_cb *self)
{
/* Can reset pointers by twidling DMA */
OUTB (0x0, OBOE_ENABLEH);
OUTBP (CONFIG0H_DMA_OFF, OBOE_CONFIG0H);
OUTB (OBOE_ENABLEH_PHYANDCLOCK, OBOE_ENABLEH);
self->rxs = inb_p (OBOE_RXSLOT) & OBOE_SLOT_MASK;
self->txs = inb_p (OBOE_TXSLOT) & OBOE_SLOT_MASK;
}
/* Called in locked state */
STATIC void
toshoboe_initptrs (struct toshoboe_cb *self)
{
/* spin_lock_irqsave(self->spinlock, flags); */
/* save_flags (flags); */
/* Can reset pointers by twidling DMA */
toshoboe_resetptrs (self);
OUTB (0x0, OBOE_ENABLEH);
OUTB (CONFIG0H_DMA_ON, OBOE_CONFIG0H);
OUTB (OBOE_ENABLEH_PHYANDCLOCK, OBOE_ENABLEH);
self->txpending = 0;
/* spin_unlock_irqrestore(self->spinlock, flags); */
/* restore_flags (flags); */
}
/* Wake the chip up and get it looking at the rings */
/* Called in locked state */
STATIC void
toshoboe_startchip (struct toshoboe_cb *self)
{
__u32 physaddr;
IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
toshoboe_initring (self);
toshoboe_enablebm (self);
OUTBP (OBOE_CONFIG1_RESET, OBOE_CONFIG1);
OUTBP (OBOE_CONFIG1_ON, OBOE_CONFIG1);
/* Stop the clocks */
OUTB (0, OBOE_ENABLEH);
/*Set size of rings */
OUTB (RING_SIZE, OBOE_RING_SIZE);
/*Acknoledge any pending interrupts */
OUTB (0xff, OBOE_ISR);
/*Enable ints */
OUTB (OBOE_INT_TXDONE | OBOE_INT_RXDONE |
OBOE_INT_TXUNDER | OBOE_INT_RXOVER | OBOE_INT_SIP , OBOE_IER);
/*Acknoledge any pending interrupts */
OUTB (0xff, OBOE_ISR);
/*Set the maximum packet length to 0xfff (4095) */
OUTB (RX_LEN >> 8, OBOE_MAXLENH);
OUTB (RX_LEN & 0xff, OBOE_MAXLENL);
/*Shutdown DMA */
OUTB (CONFIG0H_DMA_OFF, OBOE_CONFIG0H);
/*Find out where the rings live */
physaddr = virt_to_bus (self->ring);
ASSERT ((physaddr & 0x3ff) == 0,
printk (KERN_ERR DRIVER_NAME "ring not correctly aligned\n");
return;);
OUTB ((physaddr >> 10) & 0xff, OBOE_RING_BASE0);
OUTB ((physaddr >> 18) & 0xff, OBOE_RING_BASE1);
OUTB ((physaddr >> 26) & 0x3f, OBOE_RING_BASE2);
/*Enable DMA controler in byte mode and RX */
OUTB (CONFIG0H_DMA_ON, OBOE_CONFIG0H);
/* Start up the clocks */
OUTB (OBOE_ENABLEH_PHYANDCLOCK, OBOE_ENABLEH);
/*set to sensible speed */
self->speed = 9600;
toshoboe_setbaud (self);
toshoboe_initptrs (self);
}
STATIC void
toshoboe_isntstuck (struct toshoboe_cb *self)
{
}
STATIC void
toshoboe_checkstuck (struct toshoboe_cb *self)
{
unsigned long flags;
if (0)
{
spin_lock_irqsave(&self->spinlock, flags);
/* This will reset the chip completely */
printk (KERN_ERR DRIVER_NAME ": Resetting chip\n");
toshoboe_stopchip (self);
toshoboe_startchip (self);
spin_unlock_irqrestore(&self->spinlock, flags);
}
}
/*Generate packet of about mtt us long */
STATIC int
toshoboe_makemttpacket (struct toshoboe_cb *self, void *buf, int mtt)
{
int xbofs;
xbofs = ((int) (mtt/100)) * (int) (self->speed);
xbofs=xbofs/80000; /*Eight bits per byte, and mtt is in us*/
xbofs++;
IRDA_DEBUG (2, DRIVER_NAME
": generated mtt of %d bytes for %d us at %d baud\n"
, xbofs,mtt,self->speed);
if (xbofs > TX_LEN)
{
printk (KERN_ERR DRIVER_NAME ": wanted %d bytes MTT but TX_LEN is %d\n",
xbofs, TX_LEN);
xbofs = TX_LEN;
}
/*xbofs will do for SIR, MIR and FIR,SIR mode doesn't generate a checksum anyway */
memset (buf, XBOF, xbofs);
return xbofs;
}
/***********************************************************************/
/* Probe code */
STATIC void
toshoboe_dumptx (struct toshoboe_cb *self)
{
int i;
PROBE_DEBUG(KERN_WARNING "TX:");
for (i = 0; i < RX_SLOTS; ++i)
PROBE_DEBUG(" (%d,%02x)",self->ring->tx[i].len,self->ring->tx[i].control);
PROBE_DEBUG(" [%d]\n",self->speed);
}
STATIC void
toshoboe_dumprx (struct toshoboe_cb *self, int score)
{
int i;
PROBE_DEBUG(" %d\nRX:",score);
for (i = 0; i < RX_SLOTS; ++i)
PROBE_DEBUG(" (%d,%02x)",self->ring->rx[i].len,self->ring->rx[i].control);
PROBE_DEBUG("\n");
}
static inline int
stuff_byte (__u8 byte, __u8 * buf)
{
switch (byte)
{
case BOF: /* FALLTHROUGH */
case EOF: /* FALLTHROUGH */
case CE:
/* Insert transparently coded */
buf[0] = CE; /* Send link escape */
buf[1] = byte ^ IRDA_TRANS; /* Complement bit 5 */
return 2;
/* break; */
default:
/* Non-special value, no transparency required */
buf[0] = byte;
return 1;
/* break; */
}
}
STATIC int toshoboe_invalid_dev(int irq)
{
printk (KERN_WARNING DRIVER_NAME ": irq %d for unknown device.\n", irq);
return 1;
}
STATIC void
toshoboe_probeinterrupt (int irq, void *dev_id, struct pt_regs *regs)
{
struct toshoboe_cb *self = (struct toshoboe_cb *) dev_id;
__u8 irqstat;
if (self == NULL && toshoboe_invalid_dev(irq))
return;
irqstat = INB (OBOE_ISR);
/* was it us */
if (!(irqstat & OBOE_INT_MASK))
return;
/* Ack all the interrupts */
OUTB (irqstat, OBOE_ISR);
if (irqstat & OBOE_INT_TXDONE)
{
int txp;
self->int_tx++;
PROBE_DEBUG("T");
txp = INB (OBOE_TXSLOT) & OBOE_SLOT_MASK;
if (self->ring->tx[txp].control & OBOE_CTL_TX_HW_OWNS)
{
self->int_tx+=100;
PROBE_DEBUG("S");
toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX | OBOE_CONFIG0H_LOOP);
}
}
if (irqstat & OBOE_INT_RXDONE) {
self->int_rx++;
PROBE_DEBUG("R"); }
if (irqstat & OBOE_INT_TXUNDER) {
self->int_txunder++;
PROBE_DEBUG("U"); }
if (irqstat & OBOE_INT_RXOVER) {
self->int_rxover++;
PROBE_DEBUG("O"); }
if (irqstat & OBOE_INT_SIP) {
self->int_sip++;
PROBE_DEBUG("I"); }
}
STATIC int
toshoboe_maketestpacket (unsigned char *buf, int badcrc, int fir)
{
int i;
int len = 0;
union
{
__u16 value;
__u8 bytes[2];
}
fcs;
if (fir)
{
memset (buf, 0, TT_LEN);
return (TT_LEN);
}
fcs.value = INIT_FCS;
memset (buf, XBOF, 10);
len += 10;
buf[len++] = BOF;
for (i = 0; i < TT_LEN; ++i)
{
len += stuff_byte (i, buf + len);
fcs.value = irda_fcs (fcs.value, i);
}
len += stuff_byte (fcs.bytes[0] ^ badcrc, buf + len);
len += stuff_byte (fcs.bytes[1] ^ badcrc, buf + len);
buf[len++] = EOF;
len++;
return len;
}
STATIC int
toshoboe_probefail (struct toshoboe_cb *self, char *msg)
{
printk (KERN_ERR DRIVER_NAME "probe(%d) failed %s\n",self-> speed, msg);
toshoboe_dumpregs (self);
toshoboe_stopchip (self);
free_irq (self->io.irq, (void *) self);
return 0;
}
STATIC int
toshoboe_numvalidrcvs (struct toshoboe_cb *self)
{
int i, ret = 0;
for (i = 0; i < RX_SLOTS; ++i)
if ((self->ring->rx[i].control & 0xe0) == 0)
ret++;
return ret;
}
STATIC int
toshoboe_numrcvs (struct toshoboe_cb *self)
{
int i, ret = 0;
for (i = 0; i < RX_SLOTS; ++i)
if (!(self->ring->rx[i].control & OBOE_CTL_RX_HW_OWNS))
ret++;
return ret;
}
STATIC int
toshoboe_probe (struct toshoboe_cb *self)
{
int i, j, n;
#ifdef USE_MIR
int bauds[] = { 9600, 115200, 4000000, 1152000 };
#else
int bauds[] = { 9600, 115200, 4000000 };
#endif
unsigned long flags;
IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
if (request_irq (self->io.irq, toshoboe_probeinterrupt,
self->io.irqflags, "toshoboe", (void *) self))
{
printk (KERN_ERR DRIVER_NAME ": probe failed to allocate irq %d\n",
self->io.irq);
return 0;
}
/* test 1: SIR filter and back to back */
for (j = 0; j < (sizeof (bauds) / sizeof (int)); ++j)
{
int fir = (j > 1);
toshoboe_stopchip (self);
spin_lock_irqsave(&self->spinlock, flags);
/*Address is already setup */
toshoboe_startchip (self);
self->int_rx = self->int_tx = 0;
self->speed = bauds[j];
toshoboe_setbaud (self);
toshoboe_initptrs (self);
spin_unlock_irqrestore(&self->spinlock, flags);
self->ring->tx[self->txs].control =
/* (FIR only) OBOE_CTL_TX_SIP needed for switching to next slot */
/* MIR: all received data is stored in one slot */
(fir) ? OBOE_CTL_TX_HW_OWNS | OBOE_CTL_TX_RTCENTX
: OBOE_CTL_TX_HW_OWNS ;
self->ring->tx[self->txs].len =
toshoboe_maketestpacket (self->tx_bufs[self->txs], 0, fir);
self->txs++;
self->txs %= TX_SLOTS;
self->ring->tx[self->txs].control =
(fir) ? OBOE_CTL_TX_HW_OWNS | OBOE_CTL_TX_SIP
: OBOE_CTL_TX_HW_OWNS | OBOE_CTL_TX_RTCENTX ;
self->ring->tx[self->txs].len =
toshoboe_maketestpacket (self->tx_bufs[self->txs], 0, fir);
self->txs++;
self->txs %= TX_SLOTS;
self->ring->tx[self->txs].control =
(fir) ? OBOE_CTL_TX_HW_OWNS | OBOE_CTL_TX_RTCENTX
: OBOE_CTL_TX_HW_OWNS ;
self->ring->tx[self->txs].len =
toshoboe_maketestpacket (self->tx_bufs[self->txs], 0, fir);
self->txs++;
self->txs %= TX_SLOTS;
self->ring->tx[self->txs].control =
(fir) ? OBOE_CTL_TX_HW_OWNS | OBOE_CTL_TX_RTCENTX
| OBOE_CTL_TX_SIP | OBOE_CTL_TX_BAD_CRC
: OBOE_CTL_TX_HW_OWNS | OBOE_CTL_TX_RTCENTX ;
self->ring->tx[self->txs].len =
toshoboe_maketestpacket (self->tx_bufs[self->txs], 0, fir);
self->txs++;
self->txs %= TX_SLOTS;
toshoboe_dumptx (self);
/* Turn on TX and RX and loopback */
toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX | OBOE_CONFIG0H_LOOP);
i = 0;
n = fir ? 1 : 4;
while (toshoboe_numvalidrcvs (self) != n)
{
if (i > 4800)
return toshoboe_probefail (self, "filter test");
udelay ((9600*(TT_LEN+16))/self->speed);
i++;
}
n = fir ? 203 : 102;
while ((toshoboe_numrcvs(self) != self->int_rx) || (self->int_tx != n))
{
if (i > 4800)
return toshoboe_probefail (self, "interrupt test");
udelay ((9600*(TT_LEN+16))/self->speed);
i++;
}
toshoboe_dumprx (self,i);
}
/* test 2: SIR in char at a time */
toshoboe_stopchip (self);
self->int_rx = self->int_tx = 0;
spin_lock_irqsave(&self->spinlock, flags);
toshoboe_startchip (self);
spin_unlock_irqrestore(&self->spinlock, flags);
self->async = 1;
self->speed = 115200;
toshoboe_setbaud (self);
self->ring->tx[self->txs].control =
OBOE_CTL_TX_RTCENTX | OBOE_CTL_TX_HW_OWNS;
self->ring->tx[self->txs].len = 4;
((unsigned char *) self->tx_bufs[self->txs])[0] = 'f';
((unsigned char *) self->tx_bufs[self->txs])[1] = 'i';
((unsigned char *) self->tx_bufs[self->txs])[2] = 's';
((unsigned char *) self->tx_bufs[self->txs])[3] = 'h';
toshoboe_dumptx (self);
toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX | OBOE_CONFIG0H_LOOP);
i = 0;
while (toshoboe_numvalidrcvs (self) != 4)
{
if (i > 100)
return toshoboe_probefail (self, "Async test");
udelay (100);
i++;
}
while ((toshoboe_numrcvs (self) != self->int_rx) || (self->int_tx != 1))
{
if (i > 100)
return toshoboe_probefail (self, "Async interrupt test");
udelay (100);
i++;
}
toshoboe_dumprx (self,i);
self->async = 0;
self->speed = 9600;
toshoboe_setbaud (self);
toshoboe_stopchip (self);
free_irq (self->io.irq, (void *) self);
printk (KERN_WARNING DRIVER_NAME ": Self test passed ok\n");
return 1;
}
/******************************************************************/
/* Netdev style code */
/* Transmit something */
STATIC int
toshoboe_hard_xmit (struct sk_buff *skb, struct net_device *dev)
{
struct toshoboe_cb *self;
__s32 speed;
int mtt, len, ctl;
unsigned long flags;
struct irda_skb_cb *cb = (struct irda_skb_cb *) skb->cb;
self = (struct toshoboe_cb *) dev->priv;
ASSERT (self != NULL, return 0; );
IRDA_DEBUG (1, "%s.tx:%x(%x)%x\n", __FUNCTION__
,skb->len,self->txpending,INB (OBOE_ENABLEH));
if (!cb->magic) {
IRDA_DEBUG (2, "%s.Not IrLAP:%x\n", __FUNCTION__, cb->magic);
#ifdef DUMP_PACKETS
_dumpbufs(skb->data,skb->len,'>');
#endif
}
/* change speed pending, wait for its execution */
if (self->new_speed)
return -EBUSY;
/* device stopped (apm) wait for restart */
if (self->stopped)
return -EBUSY;
toshoboe_checkstuck (self);
/* Check if we need to change the speed */
/* But not now. Wait after transmission if mtt not required */
speed=irda_get_next_speed(skb);
if ((speed != self->io.speed) && (speed != -1))
{
spin_lock_irqsave(&self->spinlock, flags);
if (self->txpending || skb->len)
{
self->new_speed = speed;
IRDA_DEBUG (1, "%s: Queued TxDone scheduled speed change %d\n" ,
__FUNCTION__, speed);
/* if no data, that's all! */
if (!skb->len)
{
spin_unlock_irqrestore(&self->spinlock, flags);
dev_kfree_skb (skb);
return 0;
}
/* True packet, go on, but */
/* do not accept anything before change speed execution */
netif_stop_queue(dev);
/* ready to process TxDone interrupt */
spin_unlock_irqrestore(&self->spinlock, flags);
}
else
{
/* idle and no data, change speed now */
self->speed = speed;
toshoboe_setbaud (self);
spin_unlock_irqrestore(&self->spinlock, flags);
dev_kfree_skb (skb);
return 0;
}
}
if ((mtt = irda_get_mtt(skb)))
{
/* This is fair since the queue should be empty anyway */
spin_lock_irqsave(&self->spinlock, flags);
if (self->txpending)
{
spin_unlock_irqrestore(&self->spinlock, flags);
return -EBUSY;
}
/* If in SIR mode we need to generate a string of XBOFs */
/* In MIR and FIR we need to generate a string of data */
/* which we will add a wrong checksum to */
mtt = toshoboe_makemttpacket (self, self->tx_bufs[self->txs], mtt);
IRDA_DEBUG (1, "%s.mtt:%x(%x)%d\n", __FUNCTION__
,skb->len,mtt,self->txpending);
if (mtt)
{
self->ring->tx[self->txs].len = mtt & 0xfff;
ctl = OBOE_CTL_TX_HW_OWNS | OBOE_CTL_TX_RTCENTX;
if (INB (OBOE_ENABLEH) & OBOE_ENABLEH_FIRON)
{
ctl |= OBOE_CTL_TX_BAD_CRC | OBOE_CTL_TX_SIP ;
}
#ifdef USE_MIR
else if (INB (OBOE_ENABLEH) & OBOE_ENABLEH_MIRON)
{
ctl |= OBOE_CTL_TX_BAD_CRC;
}
#endif
self->ring->tx[self->txs].control = ctl;
OUTB (0x0, OBOE_ENABLEH);
/* It is only a timer. Do not send mtt packet outside! */
toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX | OBOE_CONFIG0H_LOOP);
self->txpending++;
self->txs++;
self->txs %= TX_SLOTS;
}
else
{
printk(KERN_ERR DRIVER_NAME ": problem with mtt packet - ignored\n");
}
spin_unlock_irqrestore(&self->spinlock, flags);
}
#ifdef DUMP_PACKETS
dumpbufs(skb->data,skb->len,'>');
#endif
spin_lock_irqsave(&self->spinlock, flags);
if (self->ring->tx[self->txs].control & OBOE_CTL_TX_HW_OWNS)
{
IRDA_DEBUG (0, "%s.ful:%x(%x)%x\n", __FUNCTION__
,skb->len, self->ring->tx[self->txs].control, self->txpending);
toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX);
spin_unlock_irqrestore(&self->spinlock, flags);
return -EBUSY;
}
if (INB (OBOE_ENABLEH) & OBOE_ENABLEH_SIRON)
{
len = async_wrap_skb (skb, self->tx_bufs[self->txs], TX_BUF_SZ);
}
else
{
len = skb->len;
memcpy (self->tx_bufs[self->txs], skb->data, len);
}
self->ring->tx[self->txs].len = len & 0x0fff;
/*Sometimes the HW doesn't see us assert RTCENTX in the interrupt code */
/*later this plays safe, we garuntee the last packet to be transmitted */
/*has RTCENTX set */
ctl = OBOE_CTL_TX_HW_OWNS | OBOE_CTL_TX_RTCENTX;
if (INB (OBOE_ENABLEH) & OBOE_ENABLEH_FIRON)
{
ctl |= OBOE_CTL_TX_SIP ;
}
self->ring->tx[self->txs].control = ctl;
/* If transmitter is idle start in one-shot mode */
if (!self->txpending)
toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX);
self->txpending++;
self->txs++;
self->txs %= TX_SLOTS;
spin_unlock_irqrestore(&self->spinlock, flags);
dev_kfree_skb (skb);
return 0;
}
/*interrupt handler */
STATIC void
toshoboe_interrupt (int irq, void *dev_id, struct pt_regs *regs)
{
struct toshoboe_cb *self = (struct toshoboe_cb *) dev_id;
__u8 irqstat;
struct sk_buff *skb = NULL;
if (self == NULL && toshoboe_invalid_dev(irq))
return;
irqstat = INB (OBOE_ISR);
/* was it us */
if (!(irqstat & OBOE_INT_MASK))
return;
/* Ack all the interrupts */
OUTB (irqstat, OBOE_ISR);
toshoboe_isntstuck (self);
/* Txdone */
if (irqstat & OBOE_INT_TXDONE)
{
int txp, txpc;
int i;
txp = self->txpending;
self->txpending = 0;
for (i = 0; i < TX_SLOTS; ++i)
{
if (self->ring->tx[i].control & OBOE_CTL_TX_HW_OWNS)
self->txpending++;
}
IRDA_DEBUG (1, "%s.txd(%x)%x/%x\n", __FUNCTION__
,irqstat,txp,self->txpending);
txp = INB (OBOE_TXSLOT) & OBOE_SLOT_MASK;
/* Got anything queued ? start it together */
if (self->ring->tx[txp].control & OBOE_CTL_TX_HW_OWNS)
{
txpc = txp;
#ifdef OPTIMIZE_TX
while (self->ring->tx[txpc].control & OBOE_CTL_TX_HW_OWNS)
{
txp = txpc;
txpc++;
txpc %= TX_SLOTS;
self->stats.tx_packets++;
if (self->ring->tx[txpc].control & OBOE_CTL_TX_HW_OWNS)
self->ring->tx[txp].control &= ~OBOE_CTL_TX_RTCENTX;
}
self->stats.tx_packets--;
#else
self->stats.tx_packets++;
#endif
toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX);
}
if ((!self->txpending) && (self->new_speed))
{
self->speed = self->new_speed;
IRDA_DEBUG (1, "%s: Executed TxDone scheduled speed change %d\n",
__FUNCTION__, self->speed);
toshoboe_setbaud (self);
}
/* Tell network layer that we want more frames */
if (!self->new_speed)
netif_wake_queue(self->netdev);
}
if (irqstat & OBOE_INT_RXDONE)
{
while (!(self->ring->rx[self->rxs].control & OBOE_CTL_RX_HW_OWNS))
{
int len = self->ring->rx[self->rxs].len;
skb = NULL;
IRDA_DEBUG (3, "%s.rcv:%x(%x)\n", __FUNCTION__
,len,self->ring->rx[self->rxs].control);
#ifdef DUMP_PACKETS
dumpbufs(self->rx_bufs[self->rxs],len,'<');
#endif
if (self->ring->rx[self->rxs].control == 0)
{
__u8 enable = INB (OBOE_ENABLEH);
/* In SIR mode we need to check the CRC as this */
/* hasn't been done by the hardware */
if (enable & OBOE_ENABLEH_SIRON)
{
if (!toshoboe_checkfcs (self->rx_bufs[self->rxs], len))
len = 0;
/*Trim off the CRC */
if (len > 1)
len -= 2;
else
len = 0;
IRDA_DEBUG (1, "%s.SIR:%x(%x)\n", __FUNCTION__, len,enable);
}
#ifdef USE_MIR
else if (enable & OBOE_ENABLEH_MIRON)
{
if (len > 1)
len -= 2;
else
len = 0;
IRDA_DEBUG (2, "%s.MIR:%x(%x)\n", __FUNCTION__, len,enable);
}
#endif
else if (enable & OBOE_ENABLEH_FIRON)
{
if (len > 3)
len -= 4; /*FIXME: check this */
else
len = 0;
IRDA_DEBUG (1, "%s.FIR:%x(%x)\n", __FUNCTION__, len,enable);
}
else
IRDA_DEBUG (0, "%s.?IR:%x(%x)\n", __FUNCTION__, len,enable);
if (len)
{
skb = dev_alloc_skb (len + 1);
if (skb)
{
skb_reserve (skb, 1);
skb_put (skb, len);
memcpy (skb->data, self->rx_bufs[self->rxs], len);
self->stats.rx_packets++;
skb->dev = self->netdev;
skb->mac.raw = skb->data;
skb->protocol = htons (ETH_P_IRDA);
}
else
{
printk (KERN_INFO
"%s(), memory squeeze, dropping frame.\n",
__FUNCTION__);
}
}
}
else
{
/* TODO: =========================================== */
/* if OBOE_CTL_RX_LENGTH, our buffers are too small */
/* (MIR or FIR) data is lost. */
/* (SIR) data is splitted in several slots. */
/* we have to join all the received buffers received */
/*in a large buffer before checking CRC. */
IRDA_DEBUG (0, "%s.err:%x(%x)\n", __FUNCTION__
,len,self->ring->rx[self->rxs].control);
}
self->ring->rx[self->rxs].len = 0x0;
self->ring->rx[self->rxs].control = OBOE_CTL_RX_HW_OWNS;
self->rxs++;
self->rxs %= RX_SLOTS;
if (skb)
netif_rx (skb);
}
}
if (irqstat & OBOE_INT_TXUNDER)
{
printk (KERN_WARNING DRIVER_NAME ": tx fifo underflow\n");
}
if (irqstat & OBOE_INT_RXOVER)
{
printk (KERN_WARNING DRIVER_NAME ": rx fifo overflow\n");
}
/* This must be useful for something... */
if (irqstat & OBOE_INT_SIP)
{
self->int_sip++;
IRDA_DEBUG (1, "%s.sip:%x(%x)%x\n", __FUNCTION__
,self->int_sip,irqstat,self->txpending);
}
}
STATIC int
toshoboe_net_init (struct net_device *dev)
{
IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
/* Setup to be a normal IrDA network device driver */
irda_device_setup (dev);
/* Insert overrides below this line! */
return 0;
}
STATIC int
toshoboe_net_open (struct net_device *dev)
{
struct toshoboe_cb *self;
unsigned long flags;
IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
ASSERT (dev != NULL, return -1; );
self = (struct toshoboe_cb *) dev->priv;
ASSERT (self != NULL, return 0; );
if (self->async)
return -EBUSY;
if (self->stopped)
return 0;
if (request_irq (self->io.irq, toshoboe_interrupt,
SA_SHIRQ | SA_INTERRUPT, dev->name, (void *) self))
{
return -EAGAIN;
}
spin_lock_irqsave(&self->spinlock, flags);
toshoboe_startchip (self);
spin_unlock_irqrestore(&self->spinlock, flags);
/* Ready to play! */
netif_start_queue(dev);
/*
* Open new IrLAP layer instance, now that everything should be
* initialized properly
*/
self->irlap = irlap_open (dev, &self->qos, driver_name);
self->irdad = 1;
MOD_INC_USE_COUNT;
return 0;
}
STATIC int
toshoboe_net_close (struct net_device *dev)
{
struct toshoboe_cb *self;
IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
ASSERT (dev != NULL, return -1; );
self = (struct toshoboe_cb *) dev->priv;
/* Stop device */
netif_stop_queue(dev);
/* Stop and remove instance of IrLAP */
if (self->irlap)
irlap_close (self->irlap);
self->irlap = NULL;
self->irdad = 0;
free_irq (self->io.irq, (void *) self);
if (!self->stopped)
{
toshoboe_stopchip (self);
}
MOD_DEC_USE_COUNT;
return 0;
}
/*
* Function toshoboe_net_ioctl (dev, rq, cmd)
*
* Process IOCTL commands for this device
*
*/
STATIC int
toshoboe_net_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
{
struct if_irda_req *irq = (struct if_irda_req *) rq;
struct toshoboe_cb *self;
unsigned long flags;
int ret = 0;
ASSERT (dev != NULL, return -1; );
self = dev->priv;
ASSERT (self != NULL, return -1; );
IRDA_DEBUG (5, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
/* Disable interrupts & save flags */
spin_lock_irqsave(&self->spinlock, flags);
switch (cmd)
{
case SIOCSBANDWIDTH: /* Set bandwidth */
/* This function will also be used by IrLAP to change the
* speed, so we still must allow for speed change within
* interrupt context.
*/
IRDA_DEBUG (1, "%s(BANDWIDTH), %s, (%X/%ld\n", __FUNCTION__
,dev->name, INB (OBOE_STATUS), irq->ifr_baudrate );
if (!in_interrupt () && !capable (CAP_NET_ADMIN))
return -EPERM;
/* self->speed=irq->ifr_baudrate; */
/* toshoboe_setbaud(self); */
/* Just change speed once - inserted by Paul Bristow */
self->new_speed = irq->ifr_baudrate;
break;
case SIOCSMEDIABUSY: /* Set media busy */
IRDA_DEBUG (1, "%s(MEDIABUSY), %s, (%X/%x)\n", __FUNCTION__
,dev->name, INB (OBOE_STATUS), capable (CAP_NET_ADMIN) );
if (!capable (CAP_NET_ADMIN))
return -EPERM;
irda_device_set_media_busy (self->netdev, TRUE);
break;
case SIOCGRECEIVING: /* Check if we are receiving right now */
irq->ifr_receiving = (INB (OBOE_STATUS) & OBOE_STATUS_RXBUSY) ? 1 : 0;
IRDA_DEBUG (3, "%s(RECEIVING), %s, (%X/%x)\n", __FUNCTION__
,dev->name, INB (OBOE_STATUS), irq->ifr_receiving );
break;
default:
IRDA_DEBUG (1, "%s(?), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
ret = -EOPNOTSUPP;
}
spin_unlock_irqrestore(&self->spinlock, flags);
return ret;
}
MODULE_DESCRIPTION("Toshiba OBOE IrDA Device Driver");
MODULE_AUTHOR("James McKenzie <james@fishsoup.dhs.org>");
MODULE_LICENSE("GPL");
MODULE_PARM (max_baud, "i");
MODULE_PARM_DESC(max_baud, "Maximum baud rate");
MODULE_PARM (do_probe, "i");
MODULE_PARM_DESC(do_probe, "Enable/disable chip probing and self-test");
STATIC void
toshoboe_close (struct pci_dev *pci_dev)
{
int i;
struct toshoboe_cb *self = (struct toshoboe_cb*)pci_get_drvdata(pci_dev);
IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
ASSERT (self != NULL, return; );
if (!self->stopped)
{
toshoboe_stopchip (self);
}
release_region (self->io.fir_base, self->io.fir_ext);
for (i = 0; i < TX_SLOTS; ++i)
{
kfree (self->tx_bufs[i]);
self->tx_bufs[i] = NULL;
}
for (i = 0; i < RX_SLOTS; ++i)
{
kfree (self->rx_bufs[i]);
self->rx_bufs[i] = NULL;
}
if (self->netdev)
{
/* Remove netdevice */
rtnl_lock ();
unregister_netdevice (self->netdev);
rtnl_unlock ();
}
kfree (self->ringbuf);
self->ringbuf = NULL;
self->ring = NULL;
return;
}
STATIC int
toshoboe_open (struct pci_dev *pci_dev, const struct pci_device_id *pdid)
{
struct toshoboe_cb *self;
struct net_device *dev;
int i = 0;
int ok = 0;
int err;
IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
if ((err=pci_enable_device(pci_dev)))
return err;
self = kmalloc (sizeof (struct toshoboe_cb), GFP_KERNEL);
if (self == NULL)
{
printk (KERN_ERR DRIVER_NAME ": can't allocate memory for "
"IrDA control block\n");
return -ENOMEM;
}
memset (self, 0, sizeof (struct toshoboe_cb));
self->pdev = pci_dev;
self->base = pci_resource_start(pci_dev,0);
self->io.fir_base = self->base;
self->io.fir_ext = OBOE_IO_EXTENT;
self->io.irq = pci_dev->irq;
self->io.irqflags = SA_SHIRQ | SA_INTERRUPT;
self->speed = self->io.speed = 9600;
self->async = 0;
/* Lock the port that we need */
if (NULL==request_region (self->io.fir_base, self->io.fir_ext, driver_name))
{
printk (KERN_ERR DRIVER_NAME ": can't get iobase of 0x%03x\n"
,self->io.fir_base);
err = -EBUSY;
goto freeself;
}
spin_lock_init(&self->spinlock);
irda_init_max_qos_capabilies (&self->qos);
self->qos.baud_rate.bits = 0;
if (max_baud >= 2400)
self->qos.baud_rate.bits |= IR_2400;
/*if (max_baud>=4800) idev->qos.baud_rate.bits|=IR_4800; */
if (max_baud >= 9600)
self->qos.baud_rate.bits |= IR_9600;
if (max_baud >= 19200)
self->qos.baud_rate.bits |= IR_19200;
if (max_baud >= 115200)
self->qos.baud_rate.bits |= IR_115200;
#ifdef USE_MIR
if (max_baud >= 1152000)
{
self->qos.baud_rate.bits |= IR_1152000;
self->flags |= IFF_MIR;
}
#endif
if (max_baud >= 4000000)
{
self->qos.baud_rate.bits |= (IR_4000000 << 8);
self->flags |= IFF_FIR;
}
/*FIXME: work this out... */
self->qos.min_turn_time.bits = 0xff;
irda_qos_bits_to_value (&self->qos);
self->flags = IFF_SIR | IFF_DMA | IFF_PIO;
/* Allocate twice the size to guarantee alignment */
self->ringbuf = (void *) kmalloc (OBOE_RING_LEN << 1, GFP_KERNEL);
if (!self->ringbuf)
{
printk (KERN_ERR DRIVER_NAME ": can't allocate DMA buffers\n");
err = -ENOMEM;
goto freeregion;
}
/*We need to align the taskfile on a taskfile size boundary */
{
__u32 addr;
addr = (__u32) self->ringbuf;
addr &= ~(OBOE_RING_LEN - 1);
addr += OBOE_RING_LEN;
self->ring = (struct OboeRing *) addr;
}
memset (self->ring, 0, OBOE_RING_LEN);
self->io.mem_base = (__u32) self->ring;
ok = 1;
for (i = 0; i < TX_SLOTS; ++i)
{
self->tx_bufs[i] = kmalloc (TX_BUF_SZ, GFP_KERNEL);
if (!self->tx_bufs[i])
ok = 0;
}
for (i = 0; i < RX_SLOTS; ++i)
{
self->rx_bufs[i] = kmalloc (RX_BUF_SZ, GFP_KERNEL);
if (!self->rx_bufs[i])
ok = 0;
}
if (!ok)
{
printk (KERN_ERR DRIVER_NAME ": can't allocate rx/tx buffers\n");
err = -ENOMEM;
goto freebufs;
}
if (do_probe)
if (!toshoboe_probe (self))
{
err = -ENODEV;
goto freebufs;
}
if (!(dev = dev_alloc ("irda%d", &err)))
{
printk (KERN_ERR DRIVER_NAME ": dev_alloc() failed\n");
err = -ENOMEM;
goto freebufs;
}
dev->priv = (void *) self;
self->netdev = dev;
printk (KERN_INFO "IrDA: Registered device %s\n", dev->name);
dev->init = toshoboe_net_init;
dev->hard_start_xmit = toshoboe_hard_xmit;
dev->open = toshoboe_net_open;
dev->stop = toshoboe_net_close;
dev->do_ioctl = toshoboe_net_ioctl;
rtnl_lock ();
err = register_netdevice (dev);
rtnl_unlock ();
if (err)
{
printk (KERN_ERR DRIVER_NAME ": register_netdev() failed\n");
err = -ENOMEM;
goto freebufs;
}
pci_set_drvdata(pci_dev,self);
printk (KERN_INFO DRIVER_NAME ": Using multiple tasks, version %s\n", rcsid);
return 0;
freebufs:
for (i = 0; i < TX_SLOTS; ++i)
if (self->tx_bufs[i])
kfree (self->tx_bufs[i]);
for (i = 0; i < RX_SLOTS; ++i)
if (self->rx_bufs[i])
kfree (self->rx_bufs[i]);
kfree(self->ringbuf);
freeregion:
release_region (self->io.fir_base, self->io.fir_ext);
freeself:
kfree (self);
return err;
}
STATIC int
toshoboe_gotosleep (struct pci_dev *pci_dev, u32 crap)
{
struct toshoboe_cb *self = (struct toshoboe_cb*)pci_get_drvdata(pci_dev);
unsigned long flags;
int i = 10;
IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
if (!self || self->stopped)
return 0;
if ((!self->irdad) && (!self->async))
return 0;
/* Flush all packets */
while ((i--) && (self->txpending))
udelay (10000);
spin_lock_irqsave(&self->spinlock, flags);
toshoboe_stopchip (self);
self->stopped = 1;
self->txpending = 0;
spin_unlock_irqrestore(&self->spinlock, flags);
return 0;
}
STATIC int
toshoboe_wakeup (struct pci_dev *pci_dev)
{
struct toshoboe_cb *self = (struct toshoboe_cb*)pci_get_drvdata(pci_dev);
unsigned long flags;
IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
if (!self || !self->stopped)
return 0;
if ((!self->irdad) && (!self->async))
return 0;
spin_lock_irqsave(&self->spinlock, flags);
toshoboe_startchip (self);
self->stopped = 0;
netif_wake_queue(self->netdev);
spin_unlock_irqrestore(&self->spinlock, flags);
return 0;
}
static struct pci_driver toshoboe_pci_driver = {
name : "toshoboe",
id_table : toshoboe_pci_tbl,
probe : toshoboe_open,
remove : toshoboe_close,
suspend : toshoboe_gotosleep,
resume : toshoboe_wakeup
};
int __init
toshoboe_init (void)
{
return pci_module_init(&toshoboe_pci_driver);
}
STATIC void __exit
toshoboe_cleanup (void)
{
pci_unregister_driver(&toshoboe_pci_driver);
}
module_init(toshoboe_init);
module_exit(toshoboe_cleanup);
drivers/net/irda/donauboe.h 0 → 100644
View file @ c8dc801d
/*********************************************************************
*
* Filename: toshoboe.h
* Version: 2.16
* Description: Driver for the Toshiba OBOE (or type-O or 701)
* FIR Chipset, also supports the DONAUOBOE (type-DO
* or d01) FIR chipset which as far as I know is
* register compatible.
* Status: Experimental.
* Author: James McKenzie <james@fishsoup.dhs.org>
* Created at: Sat May 8 12:35:27 1999
* Modified: 2.16 Martin Lucina <mato@kotelna.sk>
* Modified: 2.16 Sat Jun 22 18:54:29 2002 (sync headers)
* Modified: 2.17 Christian Gennerat <christian.gennerat@polytechnique.org>
* Modified: 2.17 jeu sep 12 08:50:20 2002 (add lock to be used by spinlocks)
*
* Copyright (c) 1999 James McKenzie, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* Neither James McKenzie nor Cambridge University admit liability nor
* provide warranty for any of this software. This material is
* provided "AS-IS" and at no charge.
*
* Applicable Models : Libretto 100/110CT and many more.
* Toshiba refers to this chip as the type-O IR port,
* or the type-DO IR port.
*
* IrDA chip set list from Toshiba Computer Engineering Corp.
* model method maker controler Version
* Portege 320CT FIR,SIR Toshiba Oboe(Triangle)
* Portege 3010CT FIR,SIR Toshiba Oboe(Sydney)
* Portege 3015CT FIR,SIR Toshiba Oboe(Sydney)
* Portege 3020CT FIR,SIR Toshiba Oboe(Sydney)
* Portege 7020CT FIR,SIR ? ?
*
* Satell. 4090XCDT FIR,SIR ? ?
*
* Libretto 100CT FIR,SIR Toshiba Oboe
* Libretto 1000CT FIR,SIR Toshiba Oboe
*
* TECRA750DVD FIR,SIR Toshiba Oboe(Triangle) REV ID=14h
* TECRA780 FIR,SIR Toshiba Oboe(Sandlot) REV ID=32h,33h
* TECRA750CDT FIR,SIR Toshiba Oboe(Triangle) REV ID=13h,14h
* TECRA8000 FIR,SIR Toshiba Oboe(ISKUR) REV ID=23h
*
********************************************************************/
/* The documentation for this chip is allegedly released */
/* However I have not seen it, not have I managed to contact */
/* anyone who has. HOWEVER the chip bears a striking resemblence */
/* to the IrDA controller in the Toshiba RISC TMPR3922 chip */
/* the documentation for this is freely available at */
/* http://www.toshiba.com/taec/components/Generic/TMPR3922.shtml */
/* The mapping between the registers in that document and the */
/* Registers in the 701 oboe chip are as follows */
/* 3922 reg 701 regs, by bit numbers */
/* 7- 0 15- 8 24-16 31-25 */
/* $28 0x0 0x1 */
/* $2c SEE NOTE 1 */
/* $30 0x6 0x7 */
/* $34 0x8 0x9 SEE NOTE 2 */
/* $38 0x10 0x11 */
/* $3C 0xe SEE NOTE 3 */
/* $40 0x12 0x13 */
/* $44 0x14 0x15 */
/* $48 0x16 0x17 */
/* $4c 0x18 0x19 */
/* $50 0x1a 0x1b */
/* FIXME: could be 0x1b 0x1a here */
/* $54 0x1d 0x1c */
/* $5C 0xf SEE NOTE 4 */
/* $130 SEE NOTE 5 */
/* $134 SEE NOTE 6 */
/* */
/* NOTES: */
/* 1. The pointer to ring is packed in most unceremoniusly */
/* 701 Register Address bits (A9-A0 must be zero) */
/* 0x4: A17 A16 A15 A14 A13 A12 A11 A10 */
/* 0x5: A25 A24 A23 A22 A21 A20 A19 A18 */
/* 0x2: 0 0 A31 A30 A29 A28 A27 A26 */
/* */
/* 2. The M$ drivers do a write 0x1 to 0x9, however the 3922 */
/* documentation would suggest that a write of 0x1 to 0x8 */
/* would be more appropriate. */
/* */
/* 3. This assignment is tenuous at best, register 0xe seems to */
/* have bits arranged 0 0 0 R/W R/W R/W R/W R/W */
/* if either of the lower two bits are set the chip seems to */
/* switch off */
/* */
/* 4. Bits 7-4 seem to be different 4 seems just to be generic */
/* receiver busy flag */
/* */
/* 5. and 6. The IER and ISR have a different bit assignment */
/* The lower three bits of both read back as ones */
/* ISR is register 0xc, IER is register 0xd */
/* 7 6 5 4 3 2 1 0 */
/* 0xc: TxDone RxDone TxUndr RxOver SipRcv 1 1 1 */
/* 0xd: TxDone RxDone TxUndr RxOver SipRcv 1 1 1 */
/* TxDone xmitt done (generated only if generate interrupt bit */
/* is set in the ring) */
/* RxDone recv completed (or other recv condition if you set it */
/* up */
/* TxUnder underflow in Transmit FIFO */
/* RxOver overflow in Recv FIFO */
/* SipRcv received serial gap (or other condition you set) */
/* Interrupts are enabled by writing a one to the IER register */
/* Interrupts are cleared by writting a one to the ISR register */
/* */
/* 6. The remaining registers: 0x6 and 0x3 appear to be */
/* reserved parts of 16 or 32 bit registersthe remainder */
/* 0xa 0xb 0x1e 0x1f could possibly be (by their behaviour) */
/* the Unicast Filter register at $58. */
/* */
/* 7. While the core obviously expects 32 bit accesses all the */
/* M$ drivers do 8 bit accesses, infact the Miniport ones */
/* write and read back the byte serveral times (why?) */
#ifndef TOSHOBOE_H
#define TOSHOBOE_H
/* Registers */
#define OBOE_IO_EXTENT 0x1f
/*Receive and transmit slot pointers */
#define OBOE_REG(i) (i+(self->base))
#define OBOE_RXSLOT OBOE_REG(0x0)
#define OBOE_TXSLOT OBOE_REG(0x1)
#define OBOE_SLOT_MASK 0x3f
#define OBOE_TXRING_OFFSET 0x200
#define OBOE_TXRING_OFFSET_IN_SLOTS 0x40
/*pointer to the ring */
#define OBOE_RING_BASE0 OBOE_REG(0x4)
#define OBOE_RING_BASE1 OBOE_REG(0x5)
#define OBOE_RING_BASE2 OBOE_REG(0x2)
#define OBOE_RING_BASE3 OBOE_REG(0x3)
/*Number of slots in the ring */
#define OBOE_RING_SIZE OBOE_REG(0x7)
#define OBOE_RING_SIZE_RX4 0x00
#define OBOE_RING_SIZE_RX8 0x01
#define OBOE_RING_SIZE_RX16 0x03
#define OBOE_RING_SIZE_RX32 0x07
#define OBOE_RING_SIZE_RX64 0x0f
#define OBOE_RING_SIZE_TX4 0x00
#define OBOE_RING_SIZE_TX8 0x10
#define OBOE_RING_SIZE_TX16 0x30
#define OBOE_RING_SIZE_TX32 0x70
#define OBOE_RING_SIZE_TX64 0xf0
#define OBOE_RING_MAX_SIZE 64
/*Causes the gubbins to re-examine the ring */
#define OBOE_PROMPT OBOE_REG(0x9)
#define OBOE_PROMPT_BIT 0x1
/* Interrupt Status Register */
#define OBOE_ISR OBOE_REG(0xc)
/* Interrupt Enable Register */
#define OBOE_IER OBOE_REG(0xd)
/* Interrupt bits for IER and ISR */
#define OBOE_INT_TXDONE 0x80
#define OBOE_INT_RXDONE 0x40
#define OBOE_INT_TXUNDER 0x20
#define OBOE_INT_RXOVER 0x10
#define OBOE_INT_SIP 0x08
#define OBOE_INT_MASK 0xf8
/*Reset Register */
#define OBOE_CONFIG1 OBOE_REG(0xe)
#define OBOE_CONFIG1_RST 0x01
#define OBOE_CONFIG1_DISABLE 0x02
#define OBOE_CONFIG1_4 0x08
#define OBOE_CONFIG1_8 0x08
#define OBOE_CONFIG1_ON 0x8
#define OBOE_CONFIG1_RESET 0xf
#define OBOE_CONFIG1_OFF 0xe
#define OBOE_STATUS OBOE_REG(0xf)
#define OBOE_STATUS_RXBUSY 0x10
#define OBOE_STATUS_FIRRX 0x04
#define OBOE_STATUS_MIRRX 0x02
#define OBOE_STATUS_SIRRX 0x01
/*Speed control registers */
#define OBOE_CONFIG0L OBOE_REG(0x10)
#define OBOE_CONFIG0H OBOE_REG(0x11)
#define OBOE_CONFIG0H_TXONLOOP 0x80 /*Transmit when looping (dangerous) */
#define OBOE_CONFIG0H_LOOP 0x40 /*Loopback Tx->Rx */
#define OBOE_CONFIG0H_ENTX 0x10 /*Enable Tx */
#define OBOE_CONFIG0H_ENRX 0x08 /*Enable Rx */
#define OBOE_CONFIG0H_ENDMAC 0x04 /*Enable/reset* the DMA controller */
#define OBOE_CONFIG0H_RCVANY 0x02 /*DMA mode 1=bytes, 0=dwords */
#define OBOE_CONFIG0L_CRC16 0x80 /*CRC 1=16 bit 0=32 bit */
#define OBOE_CONFIG0L_ENFIR 0x40 /*Enable FIR */
#define OBOE_CONFIG0L_ENMIR 0x20 /*Enable MIR */
#define OBOE_CONFIG0L_ENSIR 0x10 /*Enable SIR */
#define OBOE_CONFIG0L_ENSIRF 0x08 /*Enable SIR framer */
#define OBOE_CONFIG0L_SIRTEST 0x04 /*Enable SIR framer in MIR and FIR */
#define OBOE_CONFIG0L_INVERTTX 0x02 /*Invert Tx Line */
#define OBOE_CONFIG0L_INVERTRX 0x01 /*Invert Rx Line */
#define OBOE_BOF OBOE_REG(0x12)
#define OBOE_EOF OBOE_REG(0x13)
#define OBOE_ENABLEL OBOE_REG(0x14)
#define OBOE_ENABLEH OBOE_REG(0x15)
#define OBOE_ENABLEH_PHYANDCLOCK 0x80 /*Toggle low to copy config in */
#define OBOE_ENABLEH_CONFIGERR 0x40
#define OBOE_ENABLEH_FIRON 0x20
#define OBOE_ENABLEH_MIRON 0x10
#define OBOE_ENABLEH_SIRON 0x08
#define OBOE_ENABLEH_ENTX 0x04
#define OBOE_ENABLEH_ENRX 0x02
#define OBOE_ENABLEH_CRC16 0x01
#define OBOE_ENABLEL_BROADCAST 0x01
#define OBOE_CURR_PCONFIGL OBOE_REG(0x16) /*Current config */
#define OBOE_CURR_PCONFIGH OBOE_REG(0x17)
#define OBOE_NEW_PCONFIGL OBOE_REG(0x18)
#define OBOE_NEW_PCONFIGH OBOE_REG(0x19)
#define OBOE_PCONFIGH_BAUDMASK 0xfc
#define OBOE_PCONFIGH_WIDTHMASK 0x04
#define OBOE_PCONFIGL_WIDTHMASK 0xe0
#define OBOE_PCONFIGL_PREAMBLEMASK 0x1f
#define OBOE_PCONFIG_BAUDMASK 0xfc00
#define OBOE_PCONFIG_BAUDSHIFT 10
#define OBOE_PCONFIG_WIDTHMASK 0x04e0
#define OBOE_PCONFIG_WIDTHSHIFT 5
#define OBOE_PCONFIG_PREAMBLEMASK 0x001f
#define OBOE_PCONFIG_PREAMBLESHIFT 0
#define OBOE_MAXLENL OBOE_REG(0x1a)
#define OBOE_MAXLENH OBOE_REG(0x1b)
#define OBOE_RXCOUNTH OBOE_REG(0x1c) /*Reset on recipt */
#define OBOE_RXCOUNTL OBOE_REG(0x1d) /*of whole packet */
/* The PCI ID of the OBOE chip */
#ifndef PCI_DEVICE_ID_FIR701
#define PCI_DEVICE_ID_FIR701 0x0701
#endif
#ifndef PCI_DEVICE_ID_FIRD01
#define PCI_DEVICE_ID_FIRD01 0x0d01
#endif
struct OboeSlot
{
__u16 len; /*Tweleve bits of packet length */
__u8 unused;
__u8 control; /*Slot control/status see below */
__u32 address; /*Slot buffer address */
}
__attribute__ ((packed));
#define OBOE_NTASKS OBOE_TXRING_OFFSET_IN_SLOTS
struct OboeRing
{
struct OboeSlot rx[OBOE_NTASKS];
struct OboeSlot tx[OBOE_NTASKS];
};
#define OBOE_RING_LEN (sizeof(struct OboeRing))
#define OBOE_CTL_TX_HW_OWNS 0x80 /*W/R This slot owned by the hardware */
#define OBOE_CTL_TX_DISTX_CRC 0x40 /*W Disable CRC generation for [FM]IR */
#define OBOE_CTL_TX_BAD_CRC 0x20 /*W Generate bad CRC */
#define OBOE_CTL_TX_SIP 0x10 /*W Generate an SIP after xmittion */
#define OBOE_CTL_TX_MKUNDER 0x08 /*W Generate an underrun error */
#define OBOE_CTL_TX_RTCENTX 0x04 /*W Enable receiver and generate TXdone */
/* After this slot is processed */
#define OBOE_CTL_TX_UNDER 0x01 /*R Set by hardware to indicate underrun */
#define OBOE_CTL_RX_HW_OWNS 0x80 /*W/R This slot owned by hardware */
#define OBOE_CTL_RX_PHYERR 0x40 /*R Decoder error on receiption */
#define OBOE_CTL_RX_CRCERR 0x20 /*R CRC error only set for [FM]IR */
#define OBOE_CTL_RX_LENGTH 0x10 /*R Packet > max Rx length */
#define OBOE_CTL_RX_OVER 0x08 /*R set to indicate an overflow */
#define OBOE_CTL_RX_SIRBAD 0x04 /*R SIR had BOF in packet or ABORT sequence */
#define OBOE_CTL_RX_RXEOF 0x02 /*R Finished receiving on this slot */
struct toshoboe_cb
{
struct net_device *netdev; /* Yes! we are some kind of netdevice */
struct net_device_stats stats;
struct tty_driver ttydev;
struct irlap_cb *irlap; /* The link layer we are binded to */
chipio_t io; /* IrDA controller information */
struct qos_info qos; /* QoS capabilities for this device */
__u32 flags; /* Interface flags */
struct pci_dev *pdev; /*PCI device */
int base; /*IO base */
int txpending; /*how many tx's are pending */
int txs, rxs; /*Which slots are we at */
int irdad; /*Driver under control of netdev end */
int async; /*Driver under control of async end */
int stopped; /*Stopped by some or other APM stuff */
int filter; /*In SIR mode do we want to receive
frames or byte ranges */
void *ringbuf; /*The ring buffer */
struct OboeRing *ring; /*The ring */
void *tx_bufs[OBOE_RING_MAX_SIZE]; /*The buffers */
void *rx_bufs[OBOE_RING_MAX_SIZE];
int speed; /*Current setting of the speed */
int new_speed; /*Set to request a speed change */
/* The spinlock protect critical parts of the driver.
* Locking is done like this :
* spin_lock_irqsave(&self->spinlock, flags);
* Releasing the lock :
* spin_unlock_irqrestore(&self->spinlock, flags);
*/
spinlock_t spinlock;
/* Used for the probe and diagnostics code */
int int_rx;
int int_tx;
int int_txunder;
int int_rxover;
int int_sip;
};
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7