Manual merge of VIA tweak diffs

arch/i386/kernel/Makefile

@@ -10,7 +10,7 @@
 .S.o:
 	$(CC) $(AFLAGS) -traditional -c $< -o $*.o
 
-all: kernel.o head.o init_task.o
+all: first_rule kernel.o head.o init_task.o
 
 O_TARGET := kernel.o
 
@@ -18,19 +18,9 @@ export-objs     := mca.o mtrr.o msr.o cpuid.o microcode.o i386_ksyms.o time.o
 
 obj-y	:= process.o semaphore.o signal.o entry.o traps.o irq.o vm86.o \
 		ptrace.o i8259.o ioport.o ldt.o setup.o time.o sys_i386.o \
-		pci-dma.o i386_ksyms.o i387.o bluesmoke.o dmi_scan.o \
+		i386_ksyms.o i387.o bluesmoke.o dmi_scan.o \
 		bootflag.o
 
-
-ifdef CONFIG_PCI
-obj-y			+= pci-i386.o
-ifdef CONFIG_VISWS
-obj-y			+= pci-visws.o
-else
-obj-y			+= pci-pc.o pci-irq.o
-endif
-endif
-
 obj-$(CONFIG_MCA)		+= mca.o
 obj-$(CONFIG_MTRR)		+= mtrr.o
 obj-$(CONFIG_X86_MSR)		+= msr.o
@@ -47,4 +37,8 @@ obj-y += setup-visws.o
 obj-$(CONFIG_X86_VISWS_APIC)	+= visws_apic.o
 endif
 
+kernel-subdir-$(CONFIG_PCI)	+= pci
+subdir-y			:= $(kernel-subdir-y)
+obj-y				+= $(foreach dir,$(subdir-y),$(dir)/$(dir).o)
+
 include $(TOPDIR)/Rules.make

arch/i386/kernel/pci/Makefile

+O_TARGET        := pci.o
+
+obj-y		:= dma.o i386.o
+
+ifdef	CONFIG_VISWS
+obj-y		+= visws.o
+else
+
+obj-$(CONFIG_PCI_BIOS)		+= pcbios.o
+obj-$(CONFIG_PCI_DIRECT)	+= direct.o
+
+ifdef	CONFIG_MULTIQUAD
+obj-y		+= numa.o
+else
+obj-y		+= fixup.o
+
+ifdef	CONFIG_ACPI_PCI
+obj-y		+= acpi.o
+else
+obj-y		+= legacy.o
+endif
+
+endif		# CONFIG_MULTIQUAD
+obj-y		+= irq.o common.o
+endif		# CONFIG_VISWS
+
+export-objs     +=      $(obj-y)
+
+include $(TOPDIR)/Rules.make

arch/i386/kernel/pci/acpi.c

+#include <linux/pci.h>
+#include <linux/acpi.h>
+#include "pci.h"
+
+extern void eisa_set_level_irq(int irq);
+
+static int acpi_lookup_irq (
+	struct pci_dev		*dev,
+	int			assign)
+{
+	int			result = 0;
+	int			irq = 0;
+	u8			pin;
+
+	/* TBD: Select IRQ from possible to improve routing performance. */
+
+	/* Find IRQ pin */
+	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+	if (!pin) {
+		DBG(" -> no interrupt pin\n");
+		return 0;
+	}
+	pin = pin - 1;
+
+	result = acpi_prt_get_irq(dev, pin, &irq);
+	if (!irq)
+		result = -ENODEV;
+	if (0 != result) {
+		printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s\n",
+		       'A'+pin, dev->slot_name);
+		return result;
+	}
+
+	/* only check for the IRQ */
+	if (!assign) {
+		printk(KERN_INFO "PCI: Found IRQ %d for device %s\n", 
+		       irq, dev->slot_name);
+		return 1;
+	}
+
+	dev->irq = irq;
+
+	/* also assign an IRQ */
+	if (irq && (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
+		result = acpi_prt_set_irq(dev, pin, irq);
+		if (0 != result) {
+			printk(KERN_WARNING "PCI: Could not assign IRQ %d to device %s\n", irq, dev->slot_name);
+			return result;
+		}
+
+		eisa_set_level_irq(irq);
+
+		printk(KERN_INFO "PCI: Assigned IRQ %d for device %s\n", irq, dev->slot_name);
+	}
+
+	return 1;
+}
+
+static int __init pci_acpi_init(void)
+{
+	if (!(pci_probe & PCI_NO_ACPI_ROUTING)) {
+		printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n");
+		printk(KERN_INFO "PCI: if you experience problems, try using option 'pci=noacpi'\n");
+		pci_use_acpi_routing = 1;
+		pci_lookup_irq = acpi_lookup_irq;
+	}
+	return 0;
+}
+
+subsys_initcall(pci_acpi_init);

arch/i386/kernel/pci/changelog

+/*
+ * CHANGELOG :
+ * Jun 17, 1994 : Modified to accommodate the broken pre-PCI BIOS SPECIFICATION
+ *	Revision 2.0 present on <thys@dennis.ee.up.ac.za>'s ASUS mainboard.
+ *
+ * Jan 5,  1995 : Modified to probe PCI hardware at boot time by Frederic
+ *     Potter, potter@cao-vlsi.ibp.fr
+ *
+ * Jan 10, 1995 : Modified to store the information about configured pci
+ *      devices into a list, which can be accessed via /proc/pci by
+ *      Curtis Varner, cvarner@cs.ucr.edu
+ *
+ * Jan 12, 1995 : CPU-PCI bridge optimization support by Frederic Potter.
+ *	Alpha version. Intel & UMC chipset support only.
+ *
+ * Apr 16, 1995 : Source merge with the DEC Alpha PCI support. Most of the code
+ *	moved to drivers/pci/pci.c.
+ *
+ * Dec 7, 1996  : Added support for direct configuration access of boards
+ *      with Intel compatible access schemes (tsbogend@alpha.franken.de)
+ *
+ * Feb 3, 1997  : Set internal functions to static, save/restore flags
+ *	avoid dead locks reading broken PCI BIOS, werner@suse.de 
+ *
+ * Apr 26, 1997 : Fixed case when there is BIOS32, but not PCI BIOS
+ *	(mj@atrey.karlin.mff.cuni.cz)
+ *
+ * May 7,  1997 : Added some missing cli()'s. [mj]
+ * 
+ * Jun 20, 1997 : Corrected problems in "conf1" type accesses.
+ *      (paubert@iram.es)
+ *
+ * Aug 2,  1997 : Split to PCI BIOS handling and direct PCI access parts
+ *	and cleaned it up...     Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+ *
+ * Feb 6,  1998 : No longer using BIOS to find devices and device classes. [mj]
+ *
+ * May 1,  1998 : Support for peer host bridges. [mj]
+ *
+ * Jun 19, 1998 : Changed to use spinlocks, so that PCI configuration space
+ *	can be accessed from interrupts even on SMP systems. [mj]
+ *
+ * August  1998 : Better support for peer host bridges and more paranoid
+ *	checks for direct hardware access. Ugh, this file starts to look as
+ *	a large gallery of common hardware bug workarounds (watch the comments)
+ *	-- the PCI specs themselves are sane, but most implementors should be
+ *	hit hard with \hammer scaled \magstep5. [mj]
+ *
+ * Jan 23, 1999 : More improvements to peer host bridge logic. i450NX fixup. [mj]
+ *
+ * Feb 8,  1999 : Added UM8886BF I/O address fixup. [mj]
+ *
+ * August  1999 : New resource management and configuration access stuff. [mj]
+ *
+ * Sep 19, 1999 : Use PCI IRQ routing tables for detection of peer host bridges.
+ *		  Based on ideas by Chris Frantz and David Hinds. [mj]
+ *
+ * Sep 28, 1999 : Handle unreported/unassigned IRQs. Thanks to Shuu Yamaguchi
+ *		  for a lot of patience during testing. [mj]
+ *
+ * Oct  8, 1999 : Split to pci-i386.c, pci-pc.c and pci-visws.c. [mj]
+ */
\ No newline at end of file

arch/i386/kernel/pci/common.c

+/*
+ *	Low-Level PCI Support for PC
+ *
+ *	(c) 1999--2000 Martin Mares <mj@ucw.cz>
+ */
+
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+
+#include <asm/segment.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+
+#include "pci.h"
+
+#ifdef CONFIG_PCI_BIOS
+extern  void pcibios_sort(void);
+#endif
+
+unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2;
+
+int pcibios_last_bus = -1;
+struct pci_bus *pci_root_bus = NULL;
+struct pci_ops *pci_root_ops = NULL;
+
+int (*pci_config_read)(int seg, int bus, int dev, int fn, int reg, int len, u32 *value) = NULL;
+int (*pci_config_write)(int seg, int bus, int dev, int fn, int reg, int len, u32 value) = NULL;
+
+/*
+ * This interrupt-safe spinlock protects all accesses to PCI
+ * configuration space.
+ */
+spinlock_t pci_config_lock = SPIN_LOCK_UNLOCKED;
+
+/*
+ * Several buggy motherboards address only 16 devices and mirror
+ * them to next 16 IDs. We try to detect this `feature' on all
+ * primary buses (those containing host bridges as they are
+ * expected to be unique) and remove the ghost devices.
+ */
+
+static void __devinit pcibios_fixup_ghosts(struct pci_bus *b)
+{
+	struct list_head *ln, *mn;
+	struct pci_dev *d, *e;
+	int mirror = PCI_DEVFN(16,0);
+	int seen_host_bridge = 0;
+	int i;
+
+	DBG("PCI: Scanning for ghost devices on bus %d\n", b->number);
+	for (ln=b->devices.next; ln != &b->devices; ln=ln->next) {
+		d = pci_dev_b(ln);
+		if ((d->class >> 8) == PCI_CLASS_BRIDGE_HOST)
+			seen_host_bridge++;
+		for (mn=ln->next; mn != &b->devices; mn=mn->next) {
+			e = pci_dev_b(mn);
+			if (e->devfn != d->devfn + mirror ||
+			    e->vendor != d->vendor ||
+			    e->device != d->device ||
+			    e->class != d->class)
+				continue;
+			for(i=0; i<PCI_NUM_RESOURCES; i++)
+				if (e->resource[i].start != d->resource[i].start ||
+				    e->resource[i].end != d->resource[i].end ||
+				    e->resource[i].flags != d->resource[i].flags)
+					continue;
+			break;
+		}
+		if (mn == &b->devices)
+			return;
+	}
+	if (!seen_host_bridge)
+		return;
+	printk(KERN_WARNING "PCI: Ignoring ghost devices on bus %02x\n", b->number);
+
+	ln = &b->devices;
+	while (ln->next != &b->devices) {
+		d = pci_dev_b(ln->next);
+		if (d->devfn >= mirror) {
+			list_del(&d->global_list);
+			list_del(&d->bus_list);
+			kfree(d);
+		} else
+			ln = ln->next;
+	}
+}
+
+/*
+ *  Called after each bus is probed, but before its children
+ *  are examined.
+ */
+
+void __devinit  pcibios_fixup_bus(struct pci_bus *b)
+{
+	pcibios_fixup_ghosts(b);
+	pci_read_bridge_bases(b);
+}
+
+
+struct pci_bus * __devinit pcibios_scan_root(int busnum)
+{
+	struct list_head *list;
+	struct pci_bus *bus;
+
+	list_for_each(list, &pci_root_buses) {
+		bus = pci_bus_b(list);
+		if (bus->number == busnum) {
+			/* Already scanned */
+			return bus;
+		}
+	}
+
+	printk("PCI: Probing PCI hardware (bus %02x)\n", busnum);
+
+	return pci_scan_bus(busnum, pci_root_ops, NULL);
+}
+
+static int __init pcibios_init(void)
+{
+	if (!pci_root_ops) {
+		printk("PCI: System does not support PCI\n");
+		return 0;
+	}
+
+	pcibios_resource_survey();
+
+#ifdef CONFIG_PCI_BIOS
+	if ((pci_probe & PCI_BIOS_SORT) && !(pci_probe & PCI_NO_SORT))
+		pcibios_sort();
+#endif
+	return 0;
+}
+
+subsys_initcall(pcibios_init);
+
+char * __devinit  pcibios_setup(char *str)
+{
+	if (!strcmp(str, "off")) {
+		pci_probe = 0;
+		return NULL;
+	}
+#ifdef CONFIG_PCI_BIOS
+	else if (!strcmp(str, "bios")) {
+		pci_probe = PCI_PROBE_BIOS;
+		return NULL;
+	} else if (!strcmp(str, "nobios")) {
+		pci_probe &= ~PCI_PROBE_BIOS;
+		return NULL;
+	} else if (!strcmp(str, "nosort")) {
+		pci_probe |= PCI_NO_SORT;
+		return NULL;
+	} else if (!strcmp(str, "biosirq")) {
+		pci_probe |= PCI_BIOS_IRQ_SCAN;
+		return NULL;
+	}
+#endif
+#ifdef CONFIG_PCI_DIRECT
+	else if (!strcmp(str, "conf1")) {
+		pci_probe = PCI_PROBE_CONF1 | PCI_NO_CHECKS;
+		return NULL;
+	}
+	else if (!strcmp(str, "conf2")) {
+		pci_probe = PCI_PROBE_CONF2 | PCI_NO_CHECKS;
+		return NULL;
+	}
+#endif
+#ifdef CONFIG_ACPI_PCI
+	else if (!strcmp(str, "noacpi")) {
+		pci_probe |= PCI_NO_ACPI_ROUTING;
+		return NULL;
+	}
+#endif
+	else if (!strcmp(str, "rom")) {
+		pci_probe |= PCI_ASSIGN_ROMS;
+		return NULL;
+	} else if (!strcmp(str, "assign-busses")) {
+		pci_probe |= PCI_ASSIGN_ALL_BUSSES;
+		return NULL;
+	} else if (!strcmp(str, "usepirqmask")) {
+		pci_probe |= PCI_USE_PIRQ_MASK;
+		return NULL;
+	} else if (!strncmp(str, "irqmask=", 8)) {
+		pcibios_irq_mask = simple_strtol(str+8, NULL, 0);
+		return NULL;
+	} else if (!strncmp(str, "lastbus=", 8)) {
+		pcibios_last_bus = simple_strtol(str+8, NULL, 0);
+		return NULL;
+	}
+	return str;
+}
+
+unsigned int pcibios_assign_all_busses(void)
+{
+	return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0;
+}
+
+int pcibios_enable_device(struct pci_dev *dev)
+{
+	int err;
+
+	if ((err = pcibios_enable_resources(dev)) < 0)
+		return err;
+	pcibios_enable_irq(dev);
+	return 0;
+}

arch/i386/kernel/pci/direct.c

+/*
+ * direct.c - Low-level direct PCI config space access
+ */
+
+#include <linux/pci.h>
+#include "pci.h"
+
+/*
+ * Functions for accessing PCI configuration space with type 1 accesses
+ */
+
+#define PCI_CONF1_ADDRESS(bus, dev, fn, reg) \
+	(0x80000000 | (bus << 16) | (dev << 11) | (fn << 8) | (reg & ~3))
+
+static int pci_conf1_read (int seg, int bus, int dev, int fn, int reg, int len, u32 *value)
+{
+	unsigned long flags;
+
+	if (!value || (bus > 255) || (dev > 31) || (fn > 7) || (reg > 255))
+		return -EINVAL;
+
+	spin_lock_irqsave(&pci_config_lock, flags);
+
+	outl(PCI_CONF1_ADDRESS(bus, dev, fn, reg), 0xCF8);
+
+	switch (len) {
+	case 1:
+		*value = inb(0xCFC + (reg & 3));
+		break;
+	case 2:
+		*value = inw(0xCFC + (reg & 2));
+		break;
+	case 4:
+		*value = inl(0xCFC);
+		break;
+	}
+
+	spin_unlock_irqrestore(&pci_config_lock, flags);
+
+	return 0;
+}
+
+static int pci_conf1_write (int seg, int bus, int dev, int fn, int reg, int len, u32 value)
+{
+	unsigned long flags;
+
+	if ((bus > 255) || (dev > 31) || (fn > 7) || (reg > 255)) 
+		return -EINVAL;
+
+	spin_lock_irqsave(&pci_config_lock, flags);
+
+	outl(PCI_CONF1_ADDRESS(bus, dev, fn, reg), 0xCF8);
+
+	switch (len) {
+	case 1:
+		outb((u8)value, 0xCFC + (reg & 3));
+		break;
+	case 2:
+		outw((u16)value, 0xCFC + (reg & 2));
+		break;
+	case 4:
+		outl((u32)value, 0xCFC);
+		break;
+	}
+
+	spin_unlock_irqrestore(&pci_config_lock, flags);
+
+	return 0;
+}
+
+
+#undef PCI_CONF1_ADDRESS
+
+static int pci_conf1_read_config_byte(struct pci_dev *dev, int where, u8 *value)
+{
+	int result; 
+	u32 data;
+
+	if (!value) 
+		return -EINVAL;
+
+	result = pci_conf1_read(0, dev->bus->number, PCI_SLOT(dev->devfn), 
+		PCI_FUNC(dev->devfn), where, 1, &data);
+
+	*value = (u8)data;
+
+	return result;
+}
+
+static int pci_conf1_read_config_word(struct pci_dev *dev, int where, u16 *value)
+{
+	int result; 
+	u32 data;
+
+	if (!value) 
+		return -EINVAL;
+
+	result = pci_conf1_read(0, dev->bus->number, PCI_SLOT(dev->devfn), 
+		PCI_FUNC(dev->devfn), where, 2, &data);
+
+	*value = (u16)data;
+
+	return result;
+}
+
+static int pci_conf1_read_config_dword(struct pci_dev *dev, int where, u32 *value)
+{
+	if (!value) 
+		return -EINVAL;
+
+	return pci_conf1_read(0, dev->bus->number, PCI_SLOT(dev->devfn), 
+		PCI_FUNC(dev->devfn), where, 4, value);
+}
+
+static int pci_conf1_write_config_byte(struct pci_dev *dev, int where, u8 value)
+{
+	return pci_conf1_write(0, dev->bus->number, PCI_SLOT(dev->devfn), 
+		PCI_FUNC(dev->devfn), where, 1, value);
+}
+
+static int pci_conf1_write_config_word(struct pci_dev *dev, int where, u16 value)
+{
+	return pci_conf1_write(0, dev->bus->number, PCI_SLOT(dev->devfn), 
+		PCI_FUNC(dev->devfn), where, 2, value);
+}
+
+static int pci_conf1_write_config_dword(struct pci_dev *dev, int where, u32 value)
+{
+	return pci_conf1_write(0, dev->bus->number, PCI_SLOT(dev->devfn), 
+		PCI_FUNC(dev->devfn), where, 4, value);
+}
+
+static struct pci_ops pci_direct_conf1 = {
+	pci_conf1_read_config_byte,
+	pci_conf1_read_config_word,
+	pci_conf1_read_config_dword,
+	pci_conf1_write_config_byte,
+	pci_conf1_write_config_word,
+	pci_conf1_write_config_dword
+};
+
+
+/*
+ * Functions for accessing PCI configuration space with type 2 accesses
+ */
+
+#define PCI_CONF2_ADDRESS(dev, reg)	(u16)(0xC000 | (dev << 8) | reg)
+
+static int pci_conf2_read (int seg, int bus, int dev, int fn, int reg, int len, u32 *value)
+{
+	unsigned long flags;
+
+	if (!value || (bus > 255) || (dev > 31) || (fn > 7) || (reg > 255))
+		return -EINVAL;
+
+	if (dev & 0x10) 
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	spin_lock_irqsave(&pci_config_lock, flags);
+
+	outb((u8)(0xF0 | (fn << 1)), 0xCF8);
+	outb((u8)bus, 0xCFA);
+
+	switch (len) {
+	case 1:
+		*value = inb(PCI_CONF2_ADDRESS(dev, reg));
+		break;
+	case 2:
+		*value = inw(PCI_CONF2_ADDRESS(dev, reg));
+		break;
+	case 4:
+		*value = inl(PCI_CONF2_ADDRESS(dev, reg));
+		break;
+	}
+
+	outb (0, 0xCF8);
+
+	spin_unlock_irqrestore(&pci_config_lock, flags);
+
+	return 0;
+}
+
+static int pci_conf2_write (int seg, int bus, int dev, int fn, int reg, int len, u32 value)
+{
+	unsigned long flags;
+
+	if ((bus > 255) || (dev > 31) || (fn > 7) || (reg > 255)) 
+		return -EINVAL;
+
+	if (dev & 0x10) 
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	spin_lock_irqsave(&pci_config_lock, flags);
+
+	outb((u8)(0xF0 | (fn << 1)), 0xCF8);
+	outb((u8)bus, 0xCFA);
+
+	switch (len) {
+	case 1:
+		outb ((u8)value, PCI_CONF2_ADDRESS(dev, reg));
+		break;
+	case 2:
+		outw ((u16)value, PCI_CONF2_ADDRESS(dev, reg));
+		break;
+	case 4:
+		outl ((u32)value, PCI_CONF2_ADDRESS(dev, reg));
+		break;
+	}
+
+	outb (0, 0xCF8);    
+
+	spin_unlock_irqrestore(&pci_config_lock, flags);
+
+	return 0;
+}
+
+#undef PCI_CONF2_ADDRESS
+
+static int pci_conf2_read_config_byte(struct pci_dev *dev, int where, u8 *value)
+{
+	int result; 
+	u32 data;
+	result = pci_conf2_read(0, dev->bus->number, PCI_SLOT(dev->devfn), 
+		PCI_FUNC(dev->devfn), where, 1, &data);
+	*value = (u8)data;
+	return result;
+}
+
+static int pci_conf2_read_config_word(struct pci_dev *dev, int where, u16 *value)
+{
+	int result; 
+	u32 data;
+	result = pci_conf2_read(0, dev->bus->number, PCI_SLOT(dev->devfn), 
+		PCI_FUNC(dev->devfn), where, 2, &data);
+	*value = (u16)data;
+	return result;
+}
+
+static int pci_conf2_read_config_dword(struct pci_dev *dev, int where, u32 *value)
+{
+	return pci_conf2_read(0, dev->bus->number, PCI_SLOT(dev->devfn), 
+		PCI_FUNC(dev->devfn), where, 4, value);
+}
+
+static int pci_conf2_write_config_byte(struct pci_dev *dev, int where, u8 value)
+{
+	return pci_conf2_write(0, dev->bus->number, PCI_SLOT(dev->devfn), 
+		PCI_FUNC(dev->devfn), where, 1, value);
+}
+
+static int pci_conf2_write_config_word(struct pci_dev *dev, int where, u16 value)
+{
+	return pci_conf2_write(0, dev->bus->number, PCI_SLOT(dev->devfn), 
+		PCI_FUNC(dev->devfn), where, 2, value);
+}
+
+static int pci_conf2_write_config_dword(struct pci_dev *dev, int where, u32 value)
+{
+	return pci_conf2_write(0, dev->bus->number, PCI_SLOT(dev->devfn), 
+		PCI_FUNC(dev->devfn), where, 4, value);
+}
+
+static struct pci_ops pci_direct_conf2 = {
+	pci_conf2_read_config_byte,
+	pci_conf2_read_config_word,
+	pci_conf2_read_config_dword,
+	pci_conf2_write_config_byte,
+	pci_conf2_write_config_word,
+	pci_conf2_write_config_dword
+};
+
+
+/*
+ * Before we decide to use direct hardware access mechanisms, we try to do some
+ * trivial checks to ensure it at least _seems_ to be working -- we just test
+ * whether bus 00 contains a host bridge (this is similar to checking
+ * techniques used in XFree86, but ours should be more reliable since we
+ * attempt to make use of direct access hints provided by the PCI BIOS).
+ *
+ * This should be close to trivial, but it isn't, because there are buggy
+ * chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID.
+ */
+static int __devinit pci_sanity_check(struct pci_ops *o)
+{
+	u16 x;
+	struct pci_bus bus;		/* Fake bus and device */
+	struct pci_dev dev;
+
+	if (pci_probe & PCI_NO_CHECKS)
+		return 1;
+	bus.number = 0;
+	dev.bus = &bus;
+	for(dev.devfn=0; dev.devfn < 0x100; dev.devfn++)
+		if ((!o->read_word(&dev, PCI_CLASS_DEVICE, &x) &&
+		     (x == PCI_CLASS_BRIDGE_HOST || x == PCI_CLASS_DISPLAY_VGA)) ||
+		    (!o->read_word(&dev, PCI_VENDOR_ID, &x) &&
+		     (x == PCI_VENDOR_ID_INTEL || x == PCI_VENDOR_ID_COMPAQ)))
+			return 1;
+	DBG("PCI: Sanity check failed\n");
+	return 0;
+}
+
+static struct pci_ops * __devinit pci_check_direct(void)
+{
+	unsigned int tmp;
+	unsigned long flags;
+
+	__save_flags(flags); __cli();
+
+	/*
+	 * Check if configuration type 1 works.
+	 */
+	if (pci_probe & PCI_PROBE_CONF1) {
+		outb (0x01, 0xCFB);
+		tmp = inl (0xCF8);
+		outl (0x80000000, 0xCF8);
+		if (inl (0xCF8) == 0x80000000 &&
+		    pci_sanity_check(&pci_direct_conf1)) {
+			outl (tmp, 0xCF8);
+			__restore_flags(flags);
+			printk(KERN_INFO "PCI: Using configuration type 1\n");
+			if (!request_region(0xCF8, 8, "PCI conf1"))
+				return NULL;
+			return &pci_direct_conf1;
+		}
+		outl (tmp, 0xCF8);
+	}
+
+	/*
+	 * Check if configuration type 2 works.
+	 */
+	if (pci_probe & PCI_PROBE_CONF2) {
+		outb (0x00, 0xCFB);
+		outb (0x00, 0xCF8);
+		outb (0x00, 0xCFA);
+		if (inb (0xCF8) == 0x00 && inb (0xCFA) == 0x00 &&
+		    pci_sanity_check(&pci_direct_conf2)) {
+			__restore_flags(flags);
+			printk(KERN_INFO "PCI: Using configuration type 2\n");
+			if (!request_region(0xCF8, 4, "PCI conf2"))
+				return NULL;
+			return &pci_direct_conf2;
+		}
+	}
+
+	__restore_flags(flags);
+	return NULL;
+}
+
+static int __init pci_direct_init(void)
+{
+	if ((pci_probe & (PCI_PROBE_CONF1 | PCI_PROBE_CONF2)) 
+		&& (pci_root_ops = pci_check_direct())) {
+		if (pci_root_ops == &pci_direct_conf1) {
+			pci_config_read = pci_conf1_read;
+			pci_config_write = pci_conf1_write;
+		}
+		else {
+			pci_config_read = pci_conf2_read;
+			pci_config_write = pci_conf2_write;
+		}
+	}
+	return 0;
+}
+
+subsys_initcall(pci_direct_init);

arch/i386/kernel/pci/fixup.c

+/*
+ * Exceptions for specific devices. Usually work-arounds for fatal design flaws.
+ */
+
+#include <linux/pci.h>
+#include "pci.h"
+
+
+static void __devinit pci_fixup_i450nx(struct pci_dev *d)
+{
+	/*
+	 * i450NX -- Find and scan all secondary buses on all PXB's.
+	 */
+	int pxb, reg;
+	u8 busno, suba, subb;
+
+	printk(KERN_WARNING "PCI: Searching for i450NX host bridges on %s\n", d->slot_name);
+	reg = 0xd0;
+	for(pxb=0; pxb<2; pxb++) {
+		pci_read_config_byte(d, reg++, &busno);
+		pci_read_config_byte(d, reg++, &suba);
+		pci_read_config_byte(d, reg++, &subb);
+		DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
+		if (busno)
+			pci_scan_bus(busno, pci_root_ops, NULL);	/* Bus A */
+		if (suba < subb)
+			pci_scan_bus(suba+1, pci_root_ops, NULL);	/* Bus B */
+	}
+	pcibios_last_bus = -1;
+}
+
+static void __devinit pci_fixup_i450gx(struct pci_dev *d)
+{
+	/*
+	 * i450GX and i450KX -- Find and scan all secondary buses.
+	 * (called separately for each PCI bridge found)
+	 */
+	u8 busno;
+	pci_read_config_byte(d, 0x4a, &busno);
+	printk(KERN_INFO "PCI: i440KX/GX host bridge %s: secondary bus %02x\n", d->slot_name, busno);
+	pci_scan_bus(busno, pci_root_ops, NULL);
+	pcibios_last_bus = -1;
+}
+
+static void __devinit  pci_fixup_umc_ide(struct pci_dev *d)
+{
+	/*
+	 * UM8886BF IDE controller sets region type bits incorrectly,
+	 * therefore they look like memory despite of them being I/O.
+	 */
+	int i;
+
+	printk(KERN_WARNING "PCI: Fixing base address flags for device %s\n", d->slot_name);
+	for(i=0; i<4; i++)
+		d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO;
+}
+
+static void __devinit  pci_fixup_ncr53c810(struct pci_dev *d)
+{
+	/*
+	 * NCR 53C810 returns class code 0 (at least on some systems).
+	 * Fix class to be PCI_CLASS_STORAGE_SCSI
+	 */
+	if (!d->class) {
+		printk(KERN_WARNING "PCI: fixing NCR 53C810 class code for %s\n", d->slot_name);
+		d->class = PCI_CLASS_STORAGE_SCSI << 8;
+	}
+}
+
+static void __devinit pci_fixup_ide_bases(struct pci_dev *d)
+{
+	int i;
+
+	/*
+	 * PCI IDE controllers use non-standard I/O port decoding, respect it.
+	 */
+	if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
+		return;
+	DBG("PCI: IDE base address fixup for %s\n", d->slot_name);
+	for(i=0; i<4; i++) {
+		struct resource *r = &d->resource[i];
+		if ((r->start & ~0x80) == 0x374) {
+			r->start |= 2;
+			r->end = r->start;
+		}
+	}
+}
+
+static void __devinit  pci_fixup_ide_trash(struct pci_dev *d)
+{
+	int i;
+
+	/*
+	 * There exist PCI IDE controllers which have utter garbage
+	 * in first four base registers. Ignore that.
+	 */
+	DBG("PCI: IDE base address trash cleared for %s\n", d->slot_name);
+	for(i=0; i<4; i++)
+		d->resource[i].start = d->resource[i].end = d->resource[i].flags = 0;
+}
+
+static void __devinit  pci_fixup_latency(struct pci_dev *d)
+{
+	/*
+	 *  SiS 5597 and 5598 chipsets require latency timer set to
+	 *  at most 32 to avoid lockups.
+	 */
+	DBG("PCI: Setting max latency to 32\n");
+	pcibios_max_latency = 32;
+}
+
+static void __devinit pci_fixup_piix4_acpi(struct pci_dev *d)
+{
+	/*
+	 * PIIX4 ACPI device: hardwired IRQ9
+	 */
+	d->irq = 9;
+}
+
+/*
+ * Addresses issues with problems in the memory write queue timer in
+ * certain VIA Northbridges.  This bugfix is per VIA's specifications.
+ *
+ * VIA 8363,8622,8361 Northbridges:
+ *  - bits  5, 6, 7 at offset 0x55 need to be turned off
+ * VIA 8367 (KT266x) Northbridges:
+ *  - bits  5, 6, 7 at offset 0x95 need to be turned off
+ */
+static void __init pci_fixup_via_northbridge_bug(struct pci_dev *d)
+{
+	u8 v;
+	int where = 0x55;
+
+	if (d->device == PCI_DEVICE_ID_VIA_8367_0) {
+  	        where = 0x95; /* the memory write queue timer register is 
+                                 different for the kt266x's: 0x95 not 0x55 */
+	}
+
+        pci_read_config_byte(d, where, &v);
+	if (v & 0xe0) {
+		printk(KERN_WARNING "Disabling broken memory write queue: [%02x] %02x->%02x\n",
+			where, v, v & 0x1f);
+		v &= 0x1f; /* clear bits 5, 6, 7 */
+		pci_write_config_byte(d, where, v);
+	}
+}
+
+struct pci_fixup pcibios_fixups[] = {
+	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82451NX,	pci_fixup_i450nx },
+	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82454GX,	pci_fixup_i450gx },
+	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_UMC,	PCI_DEVICE_ID_UMC_UM8886BF,	pci_fixup_umc_ide },
+	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_5513,		pci_fixup_ide_trash },
+	{ PCI_FIXUP_HEADER,	PCI_ANY_ID,		PCI_ANY_ID,			pci_fixup_ide_bases },
+	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_5597,		pci_fixup_latency },
+	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_5598,		pci_fixup_latency },
+ 	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82371AB_3,	pci_fixup_piix4_acpi },
+	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8363_0,	pci_fixup_via_northbridge_bug },
+	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8622,	        pci_fixup_via_northbridge_bug },
+	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8361,	        pci_fixup_via_northbridge_bug },
+	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8367_0,	pci_fixup_via_northbridge_bug },
+	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_NCR,	PCI_DEVICE_ID_NCR_53C810,	pci_fixup_ncr53c810 },
+	{ 0 }
+};

arch/i386/kernel/pci-i386.c → arch/i386/kernel/pci/i386.c

@@ -22,67 +22,6 @@
  * PCI to PCI Bridge Specification
  * PCI System Design Guide
  *
- *
- * CHANGELOG :
- * Jun 17, 1994 : Modified to accommodate the broken pre-PCI BIOS SPECIFICATION
- *	Revision 2.0 present on <thys@dennis.ee.up.ac.za>'s ASUS mainboard.
- *
- * Jan 5,  1995 : Modified to probe PCI hardware at boot time by Frederic
- *     Potter, potter@cao-vlsi.ibp.fr
- *
- * Jan 10, 1995 : Modified to store the information about configured pci
- *      devices into a list, which can be accessed via /proc/pci by
- *      Curtis Varner, cvarner@cs.ucr.edu
- *
- * Jan 12, 1995 : CPU-PCI bridge optimization support by Frederic Potter.
- *	Alpha version. Intel & UMC chipset support only.
- *
- * Apr 16, 1995 : Source merge with the DEC Alpha PCI support. Most of the code
- *	moved to drivers/pci/pci.c.
- *
- * Dec 7, 1996  : Added support for direct configuration access of boards
- *      with Intel compatible access schemes (tsbogend@alpha.franken.de)
- *
- * Feb 3, 1997  : Set internal functions to static, save/restore flags
- *	avoid dead locks reading broken PCI BIOS, werner@suse.de 
- *
- * Apr 26, 1997 : Fixed case when there is BIOS32, but not PCI BIOS
- *	(mj@atrey.karlin.mff.cuni.cz)
- *
- * May 7,  1997 : Added some missing cli()'s. [mj]
- * 
- * Jun 20, 1997 : Corrected problems in "conf1" type accesses.
- *      (paubert@iram.es)
- *
- * Aug 2,  1997 : Split to PCI BIOS handling and direct PCI access parts
- *	and cleaned it up...     Martin Mares <mj@atrey.karlin.mff.cuni.cz>
- *
- * Feb 6,  1998 : No longer using BIOS to find devices and device classes. [mj]
- *
- * May 1,  1998 : Support for peer host bridges. [mj]
- *
- * Jun 19, 1998 : Changed to use spinlocks, so that PCI configuration space
- *	can be accessed from interrupts even on SMP systems. [mj]
- *
- * August  1998 : Better support for peer host bridges and more paranoid
- *	checks for direct hardware access. Ugh, this file starts to look as
- *	a large gallery of common hardware bug workarounds (watch the comments)
- *	-- the PCI specs themselves are sane, but most implementors should be
- *	hit hard with \hammer scaled \magstep5. [mj]
- *
- * Jan 23, 1999 : More improvements to peer host bridge logic. i450NX fixup. [mj]
- *
- * Feb 8,  1999 : Added UM8886BF I/O address fixup. [mj]
- *
- * August  1999 : New resource management and configuration access stuff. [mj]
- *
- * Sep 19, 1999 : Use PCI IRQ routing tables for detection of peer host bridges.
- *		  Based on ideas by Chris Frantz and David Hinds. [mj]
- *
- * Sep 28, 1999 : Handle unreported/unassigned IRQs. Thanks to Shuu Yamaguchi
- *		  for a lot of patience during testing. [mj]
- *
- * Oct  8, 1999 : Split to pci-i386.c, pci-pc.c and pci-visws.c. [mj]
  */
 
 #include <linux/types.h>
@@ -92,7 +31,7 @@
 #include <linux/ioport.h>
 #include <linux/errno.h>
 
-#include "pci-i386.h"
+#include "pci.h"
 
 void
 pcibios_update_resource(struct pci_dev *dev, struct resource *root,

arch/i386/kernel/pci-irq.c → arch/i386/kernel/pci/irq.c

@@ -17,7 +17,7 @@
 #include <asm/smp.h>
 #include <asm/io_apic.h>
 
-#include "pci-i386.h"
+#include "pci.h"
 
 #define PIRQ_SIGNATURE	(('$' << 0) + ('P' << 8) + ('I' << 16) + ('R' << 24))
 #define PIRQ_VERSION 0x0100
@@ -46,6 +46,8 @@ struct irq_router {
 	int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq, int new);
 };
 
+int (*pci_lookup_irq)(struct pci_dev * dev, int assign) = NULL;
+
 /*
  *  Search 0xf0000 -- 0xfffff for the PCI IRQ Routing Table.
  */
@@ -116,7 +118,7 @@ static void __init pirq_peer_trick(void)
  *  Code for querying and setting of IRQ routes on various interrupt routers.
  */
 
-static void eisa_set_level_irq(unsigned int irq)
+void eisa_set_level_irq(unsigned int irq)
 {
 	unsigned char mask = 1 << (irq & 7);
 	unsigned int port = 0x4d0 + (irq >> 3);
@@ -558,54 +560,6 @@ static void pcibios_test_irq_handler(int irq, void *dev_id, struct pt_regs *regs
 {
 }
 
-#ifdef CONFIG_ACPI_PCI
-
-static int acpi_lookup_irq (
-	struct pci_dev		*dev,
-	u8			pin,
-	int			assign)
-{
-	int			result = 0;
-	int			irq = 0;
-
-	/* TBD: Select IRQ from possible to improve routing performance. */
-
-	result = acpi_prt_get_irq(dev, pin, &irq);
-	if (!irq)
-		result = -ENODEV;
-	if (0 != result) {
-		printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s\n",
-		       'A'+pin, dev->slot_name);
-		return result;
-	}
-
-	dev->irq = irq;
-
-	if (!assign) {
-		/* only check for the IRQ */
-		printk(KERN_INFO "PCI: Found IRQ %d for device %s\n", irq, 
-		       dev->slot_name);
-		return 1;
-	}
-
-	/* also assign an IRQ */
-	if (irq && (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
-		result = acpi_prt_set_irq(dev, pin, irq);
-		if (0 != result) {
-			printk(KERN_WARNING "PCI: Could not assign IRQ %d to device %s\n", irq, dev->slot_name);
-			return result;
-		}
-
-		eisa_set_level_irq(irq);
-
-		printk(KERN_INFO "PCI: Assigned IRQ %d for device %s\n", irq, dev->slot_name);
-	}
-
-	return 1;
-}
-
-#endif /* CONFIG_ACPI_PCI */
-
 static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 {
 	u8 pin;
@@ -625,12 +579,6 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 	}
 	pin = pin - 1;
 
-#ifdef CONFIG_ACPI_PCI
-	/* Use ACPI to lookup IRQ */
-	if (pci_use_acpi_routing)
-		return acpi_lookup_irq(dev, pin, assign);
-#endif
-
 	/* Find IRQ routing entry */
 
 	if (!pirq_table)
@@ -738,21 +686,12 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 	return 1;
 }
 
-void __init pcibios_irq_init(void)
+static int __init pcibios_irq_init(void)
 {
 	DBG("PCI: IRQ init\n");
 
-#ifdef CONFIG_ACPI_PCI
-	if (!(pci_probe & PCI_NO_ACPI_ROUTING)) {
-		if (acpi_prts.count) {
-			printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n");
-			pci_use_acpi_routing = 1;
-			return;
-		}
-		else
-			printk(KERN_WARNING "PCI: Invalid ACPI-PCI IRQ routing table\n");
-	}
-#endif
+	if (pci_lookup_irq)
+		return 0;
 
 	pirq_table = pirq_find_routing_table();
 
@@ -773,8 +712,13 @@ void __init pcibios_irq_init(void)
 		if (io_apic_assign_pci_irqs)
 			pirq_table = NULL;
 	}
+	pci_lookup_irq = pcibios_lookup_irq;
+	pcibios_fixup_irqs();
+	return 0;
 }
 
+subsys_initcall(pcibios_irq_init);
+
 void __init pcibios_fixup_irqs(void)
 {
 	struct pci_dev *dev;
@@ -837,7 +781,7 @@ void __init pcibios_fixup_irqs(void)
 		 * Still no IRQ? Try to lookup one...
 		 */
 		if (pin && !dev->irq)
-			pcibios_lookup_irq(dev, 0);
+			pci_lookup_irq(dev, 0);
 	}
 }
 
@@ -854,7 +798,7 @@ void pcibios_enable_irq(struct pci_dev *dev)
 {
 	u8 pin;
 	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
-	if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) {
+	if (pin && !pci_lookup_irq(dev, 1) && !dev->irq) {
 		char *msg;
 		if (io_apic_assign_pci_irqs)
 			msg = " Probably buggy MP table.";

arch/i386/kernel/pci/legacy.c

+/*
+ * legacy.c - traditional, old school PCI bus probing
+ */
+#include <linux/pci.h>
+#include "pci.h"
+
+/*
+ * Discover remaining PCI buses in case there are peer host bridges.
+ * We use the number of last PCI bus provided by the PCI BIOS.
+ */
+static void __devinit pcibios_fixup_peer_bridges(void)
+{
+	int n;
+	struct pci_bus bus;
+	struct pci_dev dev;
+	u16 l;
+
+	if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff)
+		return;
+	DBG("PCI: Peer bridge fixup\n");
+	for (n=0; n <= pcibios_last_bus; n++) {
+		if (pci_bus_exists(&pci_root_buses, n))
+			continue;
+		bus.number = n;
+		bus.ops = pci_root_ops;
+		dev.bus = &bus;
+		for(dev.devfn=0; dev.devfn<256; dev.devfn += 8)
+			if (!pci_read_config_word(&dev, PCI_VENDOR_ID, &l) &&
+			    l != 0x0000 && l != 0xffff) {
+				DBG("Found device at %02x:%02x [%04x]\n", n, dev.devfn, l);
+				printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n);
+				pci_scan_bus(n, pci_root_ops, NULL);
+				break;
+			}
+	}
+}
+
+static int __init pci_legacy_init(void)
+{
+	if (!pci_root_ops) {
+		printk("PCI: System does not support PCI\n");
+		return 0;
+	}
+
+	printk("PCI: Probing PCI hardware\n");
+	pci_root_bus = pcibios_scan_root(0);
+
+	if (!pci_use_acpi_routing)
+		pcibios_fixup_peer_bridges();
+	return 0;
+}
+
+subsys_initcall(pci_legacy_init);

arch/i386/kernel/pci/numa.c

+/*
+ * numa.c - Low-level PCI access for NUMA-Q machines
+ */
+#include <linux/pci.h>
+
+#include "pci.h"
+
+#define BUS2QUAD(global) (mp_bus_id_to_node[global])
+#define BUS2LOCAL(global) (mp_bus_id_to_local[global])
+#define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
+
+#define PCI_CONF1_ADDRESS(bus, dev, fn, reg) \
+	(0x80000000 | (BUS2LOCAL(bus) << 16) | (dev << 11) | (fn << 8) | (reg & ~3))
+
+static int pci_conf1_read (int seg, int bus, int dev, int fn, int reg, int len, u32 *value)
+{
+	unsigned long flags;
+
+	if (!value || (bus > 255) || (dev > 31) || (fn > 7) || (reg > 255))
+		return -EINVAL;
+
+	spin_lock_irqsave(&pci_config_lock, flags);
+
+	outl_quad(PCI_CONF1_ADDRESS(bus, dev, fn, reg), 0xCF8, BUS2QUAD(bus));
+
+	switch (len) {
+	case 1:
+		*value = inb_quad(0xCFC + (reg & 3), BUS2QUAD(bus));
+		break;
+	case 2:
+		*value = inw_quad(0xCFC + (reg & 2), BUS2QUAD(bus));
+		break;
+	case 4:
+		*value = inl_quad(0xCFC, BUS2QUAD(bus));
+		break;
+	}
+
+	spin_unlock_irqrestore(&pci_config_lock, flags);
+
+	return 0;
+}
+
+static int pci_conf1_write (int seg, int bus, int dev, int fn, int reg, int len, u32 value)
+{
+	unsigned long flags;
+
+	if ((bus > 255) || (dev > 31) || (fn > 7) || (reg > 255)) 
+		return -EINVAL;
+
+	spin_lock_irqsave(&pci_config_lock, flags);
+
+	outl_quad(PCI_CONF1_ADDRESS(bus, dev, fn, reg), 0xCF8, BUS2QUAD(bus));
+
+	switch (len) {
+	case 1:
+		outb_quad((u8)value, 0xCFC + (reg & 3), BUS2QUAD(bus));
+		break;
+	case 2:
+		outw_quad((u16)value, 0xCFC + (reg & 2), BUS2QUAD(bus));
+		break;
+	case 4:
+		outl_quad((u32)value, 0xCFC, BUS2QUAD(bus));
+		break;
+	}
+
+	spin_unlock_irqrestore(&pci_config_lock, flags);
+
+	return 0;
+}
+
+
+static void __devinit pci_fixup_i450nx(struct pci_dev *d)
+{
+	/*
+	 * i450NX -- Find and scan all secondary buses on all PXB's.
+	 */
+	int pxb, reg;
+	u8 busno, suba, subb;
+	int quad = BUS2QUAD(d->bus->number);
+
+	printk("PCI: Searching for i450NX host bridges on %s\n", d->slot_name);
+	reg = 0xd0;
+	for(pxb=0; pxb<2; pxb++) {
+		pci_read_config_byte(d, reg++, &busno);
+		pci_read_config_byte(d, reg++, &suba);
+		pci_read_config_byte(d, reg++, &subb);
+		DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
+		if (busno)
+			pci_scan_bus(QUADLOCAL2BUS(quad,busno), pci_root_ops, NULL);	/* Bus A */
+		if (suba < subb)
+			pci_scan_bus(QUADLOCAL2BUS(quad,suba+1), pci_root_ops, NULL);	/* Bus B */
+	}
+	pcibios_last_bus = -1;
+}
+
+struct pci_fixup pcibios_fixups[] = {
+	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82451NX,	pci_fixup_i450nx },
+};
+
+static int __init pci_numa_init(void)
+{
+	int quad;
+
+	pci_config_read = pci_conf1_read;
+	pci_config_write = pci_conf1_write;
+
+	pci_root_bus = pcibios_scan_root(0);
+	if (clustered_apic_mode && (numnodes > 1)) {
+		for (quad = 1; quad < numnodes; ++quad) {
+			printk("Scanning PCI bus %d for quad %d\n", 
+				QUADLOCAL2BUS(quad,0), quad);
+			pci_scan_bus(QUADLOCAL2BUS(quad,0), 
+				pci_root_ops, NULL);
+		}
+	}
+	return 0;
+}
+
+subsys_initcall(pci_numa_init);

arch/i386/kernel/pci-pc.c → arch/i386/kernel/pci/pcbios.c

 /*
- *	Low-Level PCI Support for PC
- *
- *	(c) 1999--2000 Martin Mares <mj@ucw.cz>
+ * BIOS32 and PCI BIOS handling.
  */
 
-#include <linux/config.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
 #include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-
-#include <asm/segment.h>
-#include <asm/io.h>
-#include <asm/smp.h>
-
-#include "pci-i386.h"
-
-unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2;
-
-int pcibios_last_bus = -1;
-struct pci_bus *pci_root_bus = NULL;
-struct pci_ops *pci_root_ops = NULL;
-
-int (*pci_config_read)(int seg, int bus, int dev, int fn, int reg, int len, u32 *value) = NULL;
-int (*pci_config_write)(int seg, int bus, int dev, int fn, int reg, int len, u32 value) = NULL;
-
-#ifdef CONFIG_MULTIQUAD
-#define BUS2QUAD(global) (mp_bus_id_to_node[global])
-#define BUS2LOCAL(global) (mp_bus_id_to_local[global])
-#define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
-#else
-#define BUS2QUAD(global) (0)
-#define BUS2LOCAL(global) (global)
-#define QUADLOCAL2BUS(quad,local) (local)
-#endif
-
-/*
- * This interrupt-safe spinlock protects all accesses to PCI
- * configuration space.
- */
-static spinlock_t pci_config_lock = SPIN_LOCK_UNLOCKED;
-
-
-/*
- * Functions for accessing PCI configuration space with type 1 accesses
- */
-
-#ifdef CONFIG_PCI_DIRECT
-
-#ifdef CONFIG_MULTIQUAD
-#define PCI_CONF1_ADDRESS(bus, dev, fn, reg) \
-	(0x80000000 | (BUS2LOCAL(bus) << 16) | (dev << 11) | (fn << 8) | (reg & ~3))
-
-static int pci_conf1_read (int seg, int bus, int dev, int fn, int reg, int len, u32 *value) /* CONFIG_MULTIQUAD */
-{
-	unsigned long flags;
-
-	if (!value || (bus > 255) || (dev > 31) || (fn > 7) || (reg > 255))
-		return -EINVAL;
-
-	spin_lock_irqsave(&pci_config_lock, flags);
-
-	outl_quad(PCI_CONF1_ADDRESS(bus, dev, fn, reg), 0xCF8, BUS2QUAD(bus));
-
-	switch (len) {
-	case 1:
-		*value = inb_quad(0xCFC + (reg & 3), BUS2QUAD(bus));
-		break;
-	case 2:
-		*value = inw_quad(0xCFC + (reg & 2), BUS2QUAD(bus));
-		break;
-	case 4:
-		*value = inl_quad(0xCFC, BUS2QUAD(bus));
-		break;
-	}
-
-	spin_unlock_irqrestore(&pci_config_lock, flags);
-
-	return 0;
-}
-
-static int pci_conf1_write (int seg, int bus, int dev, int fn, int reg, int len, u32 value) /* CONFIG_MULTIQUAD */
-{
-	unsigned long flags;
-
-	if ((bus > 255) || (dev > 31) || (fn > 7) || (reg > 255)) 
-		return -EINVAL;
-
-	spin_lock_irqsave(&pci_config_lock, flags);
-
-	outl_quad(PCI_CONF1_ADDRESS(bus, dev, fn, reg), 0xCF8, BUS2QUAD(bus));
-
-	switch (len) {
-	case 1:
-		outb_quad((u8)value, 0xCFC + (reg & 3), BUS2QUAD(bus));
-		break;
-	case 2:
-		outw_quad((u16)value, 0xCFC + (reg & 2), BUS2QUAD(bus));
-		break;
-	case 4:
-		outl_quad((u32)value, 0xCFC, BUS2QUAD(bus));
-		break;
-	}
-
-	spin_unlock_irqrestore(&pci_config_lock, flags);
-
-	return 0;
-}
-
-#else /* !CONFIG_MULTIQUAD */
-#define PCI_CONF1_ADDRESS(bus, dev, fn, reg) \
-	(0x80000000 | (bus << 16) | (dev << 11) | (fn << 8) | (reg & ~3))
-
-static int pci_conf1_read (int seg, int bus, int dev, int fn, int reg, int len, u32 *value) /* !CONFIG_MULTIQUAD */
-{
-	unsigned long flags;
-
-	if (!value || (bus > 255) || (dev > 31) || (fn > 7) || (reg > 255))
-		return -EINVAL;
-
-	spin_lock_irqsave(&pci_config_lock, flags);
-
-	outl(PCI_CONF1_ADDRESS(bus, dev, fn, reg), 0xCF8);
-
-	switch (len) {
-	case 1:
-		*value = inb(0xCFC + (reg & 3));
-		break;
-	case 2:
-		*value = inw(0xCFC + (reg & 2));
-		break;
-	case 4:
-		*value = inl(0xCFC);
-		break;
-	}
-
-	spin_unlock_irqrestore(&pci_config_lock, flags);
-
-	return 0;
-}
-
-static int pci_conf1_write (int seg, int bus, int dev, int fn, int reg, int len, u32 value) /* !CONFIG_MULTIQUAD */
-{
-	unsigned long flags;
-
-	if ((bus > 255) || (dev > 31) || (fn > 7) || (reg > 255)) 
-		return -EINVAL;
-
-	spin_lock_irqsave(&pci_config_lock, flags);
-
-	outl(PCI_CONF1_ADDRESS(bus, dev, fn, reg), 0xCF8);
-
-	switch (len) {
-	case 1:
-		outb((u8)value, 0xCFC + (reg & 3));
-		break;
-	case 2:
-		outw((u16)value, 0xCFC + (reg & 2));
-		break;
-	case 4:
-		outl((u32)value, 0xCFC);
-		break;
-	}
-
-	spin_unlock_irqrestore(&pci_config_lock, flags);
-
-	return 0;
-}
-
-#endif /* CONFIG_MULTIQUAD */
-
-#undef PCI_CONF1_ADDRESS
-
-static int pci_conf1_read_config_byte(struct pci_dev *dev, int where, u8 *value)
-{
-	int result; 
-	u32 data;
-
-	if (!value) 
-		return -EINVAL;
-
-	result = pci_conf1_read(0, dev->bus->number, PCI_SLOT(dev->devfn), 
-		PCI_FUNC(dev->devfn), where, 1, &data);
-
-	*value = (u8)data;
-
-	return result;
-}
-
-static int pci_conf1_read_config_word(struct pci_dev *dev, int where, u16 *value)
-{
-	int result; 
-	u32 data;
-
-	if (!value) 
-		return -EINVAL;
-
-	result = pci_conf1_read(0, dev->bus->number, PCI_SLOT(dev->devfn), 
-		PCI_FUNC(dev->devfn), where, 2, &data);
-
-	*value = (u16)data;
-
-	return result;
-}
-
-static int pci_conf1_read_config_dword(struct pci_dev *dev, int where, u32 *value)
-{
-	if (!value) 
-		return -EINVAL;
-
-	return pci_conf1_read(0, dev->bus->number, PCI_SLOT(dev->devfn), 
-		PCI_FUNC(dev->devfn), where, 4, value);
-}
-
-static int pci_conf1_write_config_byte(struct pci_dev *dev, int where, u8 value)
-{
-	return pci_conf1_write(0, dev->bus->number, PCI_SLOT(dev->devfn), 
-		PCI_FUNC(dev->devfn), where, 1, value);
-}
-
-static int pci_conf1_write_config_word(struct pci_dev *dev, int where, u16 value)
-{
-	return pci_conf1_write(0, dev->bus->number, PCI_SLOT(dev->devfn), 
-		PCI_FUNC(dev->devfn), where, 2, value);
-}
-
-static int pci_conf1_write_config_dword(struct pci_dev *dev, int where, u32 value)
-{
-	return pci_conf1_write(0, dev->bus->number, PCI_SLOT(dev->devfn), 
-		PCI_FUNC(dev->devfn), where, 4, value);
-}
-
-static struct pci_ops pci_direct_conf1 = {
-	pci_conf1_read_config_byte,
-	pci_conf1_read_config_word,
-	pci_conf1_read_config_dword,
-	pci_conf1_write_config_byte,
-	pci_conf1_write_config_word,
-	pci_conf1_write_config_dword
-};
-
-
-/*
- * Functions for accessing PCI configuration space with type 2 accesses
- */
-
-#define PCI_CONF2_ADDRESS(dev, reg)	(u16)(0xC000 | (dev << 8) | reg)
-
-static int pci_conf2_read (int seg, int bus, int dev, int fn, int reg, int len, u32 *value)
-{
-	unsigned long flags;
-
-	if (!value || (bus > 255) || (dev > 31) || (fn > 7) || (reg > 255))
-		return -EINVAL;
-
-	if (dev & 0x10) 
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	spin_lock_irqsave(&pci_config_lock, flags);
-
-	outb((u8)(0xF0 | (fn << 1)), 0xCF8);
-	outb((u8)bus, 0xCFA);
-
-	switch (len) {
-	case 1:
-		*value = inb(PCI_CONF2_ADDRESS(dev, reg));
-		break;
-	case 2:
-		*value = inw(PCI_CONF2_ADDRESS(dev, reg));
-		break;
-	case 4:
-		*value = inl(PCI_CONF2_ADDRESS(dev, reg));
-		break;
-	}
-
-	outb (0, 0xCF8);
-
-	spin_unlock_irqrestore(&pci_config_lock, flags);
-
-	return 0;
-}
-
-static int pci_conf2_write (int seg, int bus, int dev, int fn, int reg, int len, u32 value)
-{
-	unsigned long flags;
-
-	if ((bus > 255) || (dev > 31) || (fn > 7) || (reg > 255)) 
-		return -EINVAL;
-
-	if (dev & 0x10) 
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	spin_lock_irqsave(&pci_config_lock, flags);
-
-	outb((u8)(0xF0 | (fn << 1)), 0xCF8);
-	outb((u8)bus, 0xCFA);
-
-	switch (len) {
-	case 1:
-		outb ((u8)value, PCI_CONF2_ADDRESS(dev, reg));
-		break;
-	case 2:
-		outw ((u16)value, PCI_CONF2_ADDRESS(dev, reg));
-		break;
-	case 4:
-		outl ((u32)value, PCI_CONF2_ADDRESS(dev, reg));
-		break;
-	}
-
-	outb (0, 0xCF8);    
-
-	spin_unlock_irqrestore(&pci_config_lock, flags);
-
-	return 0;
-}
-
-#undef PCI_CONF2_ADDRESS
-
-static int pci_conf2_read_config_byte(struct pci_dev *dev, int where, u8 *value)
-{
-	int result; 
-	u32 data;
-	result = pci_conf2_read(0, dev->bus->number, PCI_SLOT(dev->devfn), 
-		PCI_FUNC(dev->devfn), where, 1, &data);
-	*value = (u8)data;
-	return result;
-}
+#include "pci.h"
 
-static int pci_conf2_read_config_word(struct pci_dev *dev, int where, u16 *value)
-{
-	int result; 
-	u32 data;
-	result = pci_conf2_read(0, dev->bus->number, PCI_SLOT(dev->devfn), 
-		PCI_FUNC(dev->devfn), where, 2, &data);
-	*value = (u16)data;
-	return result;
-}
-
-static int pci_conf2_read_config_dword(struct pci_dev *dev, int where, u32 *value)
-{
-	return pci_conf2_read(0, dev->bus->number, PCI_SLOT(dev->devfn), 
-		PCI_FUNC(dev->devfn), where, 4, value);
-}
-
-static int pci_conf2_write_config_byte(struct pci_dev *dev, int where, u8 value)
-{
-	return pci_conf2_write(0, dev->bus->number, PCI_SLOT(dev->devfn), 
-		PCI_FUNC(dev->devfn), where, 1, value);
-}
-
-static int pci_conf2_write_config_word(struct pci_dev *dev, int where, u16 value)
-{
-	return pci_conf2_write(0, dev->bus->number, PCI_SLOT(dev->devfn), 
-		PCI_FUNC(dev->devfn), where, 2, value);
-}
-
-static int pci_conf2_write_config_dword(struct pci_dev *dev, int where, u32 value)
-{
-	return pci_conf2_write(0, dev->bus->number, PCI_SLOT(dev->devfn), 
-		PCI_FUNC(dev->devfn), where, 4, value);
-}
-
-static struct pci_ops pci_direct_conf2 = {
-	pci_conf2_read_config_byte,
-	pci_conf2_read_config_word,
-	pci_conf2_read_config_dword,
-	pci_conf2_write_config_byte,
-	pci_conf2_write_config_word,
-	pci_conf2_write_config_dword
-};
-
-
-/*
- * Before we decide to use direct hardware access mechanisms, we try to do some
- * trivial checks to ensure it at least _seems_ to be working -- we just test
- * whether bus 00 contains a host bridge (this is similar to checking
- * techniques used in XFree86, but ours should be more reliable since we
- * attempt to make use of direct access hints provided by the PCI BIOS).
- *
- * This should be close to trivial, but it isn't, because there are buggy
- * chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID.
- */
-static int __devinit pci_sanity_check(struct pci_ops *o)
-{
-	u16 x;
-	struct pci_bus bus;		/* Fake bus and device */
-	struct pci_dev dev;
-
-	if (pci_probe & PCI_NO_CHECKS)
-		return 1;
-	bus.number = 0;
-	dev.bus = &bus;
-	for(dev.devfn=0; dev.devfn < 0x100; dev.devfn++)
-		if ((!o->read_word(&dev, PCI_CLASS_DEVICE, &x) &&
-		     (x == PCI_CLASS_BRIDGE_HOST || x == PCI_CLASS_DISPLAY_VGA)) ||
-		    (!o->read_word(&dev, PCI_VENDOR_ID, &x) &&
-		     (x == PCI_VENDOR_ID_INTEL || x == PCI_VENDOR_ID_COMPAQ)))
-			return 1;
-	DBG("PCI: Sanity check failed\n");
-	return 0;
-}
-
-static struct pci_ops * __devinit pci_check_direct(void)
-{
-	unsigned int tmp;
-	unsigned long flags;
-
-	__save_flags(flags); __cli();
-
-	/*
-	 * Check if configuration type 1 works.
-	 */
-	if (pci_probe & PCI_PROBE_CONF1) {
-		outb (0x01, 0xCFB);
-		tmp = inl (0xCF8);
-		outl (0x80000000, 0xCF8);
-		if (inl (0xCF8) == 0x80000000 &&
-		    pci_sanity_check(&pci_direct_conf1)) {
-			outl (tmp, 0xCF8);
-			__restore_flags(flags);
-			printk(KERN_INFO "PCI: Using configuration type 1\n");
-			if (!request_region(0xCF8, 8, "PCI conf1"))
-				return NULL;
-			return &pci_direct_conf1;
-		}
-		outl (tmp, 0xCF8);
-	}
-
-	/*
-	 * Check if configuration type 2 works.
-	 */
-	if (pci_probe & PCI_PROBE_CONF2) {
-		outb (0x00, 0xCFB);
-		outb (0x00, 0xCF8);
-		outb (0x00, 0xCFA);
-		if (inb (0xCF8) == 0x00 && inb (0xCFA) == 0x00 &&
-		    pci_sanity_check(&pci_direct_conf2)) {
-			__restore_flags(flags);
-			printk(KERN_INFO "PCI: Using configuration type 2\n");
-			if (!request_region(0xCF8, 4, "PCI conf2"))
-				return NULL;
-			return &pci_direct_conf2;
-		}
-	}
-
-	__restore_flags(flags);
-	return NULL;
-}
-
-#endif
-
-/*
- * BIOS32 and PCI BIOS handling.
- */
-
-#ifdef CONFIG_PCI_BIOS
 
 #define PCIBIOS_PCI_FUNCTION_ID 	0xb1XX
 #define PCIBIOS_PCI_BIOS_PRESENT 	0xb101
@@ -877,7 +425,7 @@ static struct pci_ops * __devinit pci_find_bios(void)
  * which used BIOS ordering, we are bound to do this...
  */
 
-static void __devinit pcibios_sort(void)
+void __devinit pcibios_sort(void)
 {
 	LIST_HEAD(sorted_devices);
 	struct list_head *ln;
@@ -996,314 +544,8 @@ int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq)
 	return !(ret & 0xff00);
 }
 
-#endif
-
-/*
- * Several buggy motherboards address only 16 devices and mirror
- * them to next 16 IDs. We try to detect this `feature' on all
- * primary buses (those containing host bridges as they are
- * expected to be unique) and remove the ghost devices.
- */
-
-static void __devinit pcibios_fixup_ghosts(struct pci_bus *b)
-{
-	struct list_head *ln, *mn;
-	struct pci_dev *d, *e;
-	int mirror = PCI_DEVFN(16,0);
-	int seen_host_bridge = 0;
-	int i;
-
-	DBG("PCI: Scanning for ghost devices on bus %d\n", b->number);
-	for (ln=b->devices.next; ln != &b->devices; ln=ln->next) {
-		d = pci_dev_b(ln);
-		if ((d->class >> 8) == PCI_CLASS_BRIDGE_HOST)
-			seen_host_bridge++;
-		for (mn=ln->next; mn != &b->devices; mn=mn->next) {
-			e = pci_dev_b(mn);
-			if (e->devfn != d->devfn + mirror ||
-			    e->vendor != d->vendor ||
-			    e->device != d->device ||
-			    e->class != d->class)
-				continue;
-			for(i=0; i<PCI_NUM_RESOURCES; i++)
-				if (e->resource[i].start != d->resource[i].start ||
-				    e->resource[i].end != d->resource[i].end ||
-				    e->resource[i].flags != d->resource[i].flags)
-					continue;
-			break;
-		}
-		if (mn == &b->devices)
-			return;
-	}
-	if (!seen_host_bridge)
-		return;
-	printk(KERN_WARNING "PCI: Ignoring ghost devices on bus %02x\n", b->number);
-
-	ln = &b->devices;
-	while (ln->next != &b->devices) {
-		d = pci_dev_b(ln->next);
-		if (d->devfn >= mirror) {
-			list_del(&d->global_list);
-			list_del(&d->bus_list);
-			kfree(d);
-		} else
-			ln = ln->next;
-	}
-}
-
-/*
- * Discover remaining PCI buses in case there are peer host bridges.
- * We use the number of last PCI bus provided by the PCI BIOS.
- */
-static void __devinit pcibios_fixup_peer_bridges(void)
-{
-	int n;
-	struct pci_bus bus;
-	struct pci_dev dev;
-	u16 l;
-
-	if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff)
-		return;
-	DBG("PCI: Peer bridge fixup\n");
-	for (n=0; n <= pcibios_last_bus; n++) {
-		if (pci_bus_exists(&pci_root_buses, n))
-			continue;
-		bus.number = n;
-		bus.ops = pci_root_ops;
-		dev.bus = &bus;
-		for(dev.devfn=0; dev.devfn<256; dev.devfn += 8)
-			if (!pci_read_config_word(&dev, PCI_VENDOR_ID, &l) &&
-			    l != 0x0000 && l != 0xffff) {
-				DBG("Found device at %02x:%02x [%04x]\n", n, dev.devfn, l);
-				printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n);
-				pci_scan_bus(n, pci_root_ops, NULL);
-				break;
-			}
-	}
-}
-
-/*
- * Exceptions for specific devices. Usually work-arounds for fatal design flaws.
- */
-
-static void __devinit pci_fixup_i450nx(struct pci_dev *d)
-{
-	/*
-	 * i450NX -- Find and scan all secondary buses on all PXB's.
-	 */
-	int pxb, reg;
-	u8 busno, suba, subb;
-#ifdef CONFIG_MULTIQUAD
-	int quad = BUS2QUAD(d->bus->number);
-#endif
-	printk("PCI: Searching for i450NX host bridges on %s\n", d->slot_name);
-	reg = 0xd0;
-	for(pxb=0; pxb<2; pxb++) {
-		pci_read_config_byte(d, reg++, &busno);
-		pci_read_config_byte(d, reg++, &suba);
-		pci_read_config_byte(d, reg++, &subb);
-		DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
-		if (busno)
-			pci_scan_bus(QUADLOCAL2BUS(quad,busno), pci_root_ops, NULL);	/* Bus A */
-		if (suba < subb)
-			pci_scan_bus(QUADLOCAL2BUS(quad,suba+1), pci_root_ops, NULL);	/* Bus B */
-	}
-	pcibios_last_bus = -1;
-}
-
-static void __devinit pci_fixup_i450gx(struct pci_dev *d)
-{
-	/*
-	 * i450GX and i450KX -- Find and scan all secondary buses.
-	 * (called separately for each PCI bridge found)
-	 */
-	u8 busno;
-	pci_read_config_byte(d, 0x4a, &busno);
-	printk(KERN_INFO "PCI: i440KX/GX host bridge %s: secondary bus %02x\n", d->slot_name, busno);
-	pci_scan_bus(busno, pci_root_ops, NULL);
-	pcibios_last_bus = -1;
-}
-
-static void __devinit  pci_fixup_umc_ide(struct pci_dev *d)
-{
-	/*
-	 * UM8886BF IDE controller sets region type bits incorrectly,
-	 * therefore they look like memory despite of them being I/O.
-	 */
-	int i;
-
-	printk(KERN_WARNING "PCI: Fixing base address flags for device %s\n", d->slot_name);
-	for(i=0; i<4; i++)
-		d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO;
-}
-
-static void __devinit  pci_fixup_ncr53c810(struct pci_dev *d)
-{
-    /*
-     * NCR 53C810 returns class code 0 (at least on some systems).
-     * Fix class to be PCI_CLASS_STORAGE_SCSI
-     */
-    if (!d->class) {
-        printk("PCI: fixing NCR 53C810 class code for %s\n", d->slot_name);
-        d->class = PCI_CLASS_STORAGE_SCSI << 8;
-    }
-}
-
-static void __devinit pci_fixup_ide_bases(struct pci_dev *d)
+static int __init pci_pcbios_init(void)
 {
-	int i;
-
-	/*
-	 * PCI IDE controllers use non-standard I/O port decoding, respect it.
-	 */
-	if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
-		return;
-	DBG("PCI: IDE base address fixup for %s\n", d->slot_name);
-	for(i=0; i<4; i++) {
-		struct resource *r = &d->resource[i];
-		if ((r->start & ~0x80) == 0x374) {
-			r->start |= 2;
-			r->end = r->start;
-		}
-	}
-}
-
-static void __devinit  pci_fixup_ide_trash(struct pci_dev *d)
-{
-	int i;
-
-	/*
-	 * There exist PCI IDE controllers which have utter garbage
-	 * in first four base registers. Ignore that.
-	 */
-	DBG("PCI: IDE base address trash cleared for %s\n", d->slot_name);
-	for(i=0; i<4; i++)
-		d->resource[i].start = d->resource[i].end = d->resource[i].flags = 0;
-}
-
-static void __devinit  pci_fixup_latency(struct pci_dev *d)
-{
-	/*
-	 *  SiS 5597 and 5598 chipsets require latency timer set to
-	 *  at most 32 to avoid lockups.
-	 */
-	DBG("PCI: Setting max latency to 32\n");
-	pcibios_max_latency = 32;
-}
-
-static void __devinit pci_fixup_piix4_acpi(struct pci_dev *d)
-{
-	/*
-	 * PIIX4 ACPI device: hardwired IRQ9
-	 */
-	d->irq = 9;
-}
-
-/*
- * Addresses issues with problems in the memory write queue timer in
- * certain VIA Northbridges.  This bugfix is per VIA's specifications,
- * except for the KL133/KM133: clearing bit 5 on those Northbridges seems
- * to trigger a bug in its integrated ProSavage video card, which
- * causes screen corruption.  We only clear bits 6 and 7 for that chipset,
- * until VIA can provide us with definitive information on why screen
- * corruption occurs, and what exactly those bits do.
- *
- * VIA 8363,8622,8361 Northbridges:
- *  - bits  5, 6, 7 at offset 0x55 need to be turned off
- * VIA 8367 (KT266x) Northbridges:
- *  - bits  5, 6, 7 at offset 0x95 need to be turned off
- * VIA 8363 rev 0x81/0x84 (KL133/KM133) Northbridges:
- *  - bits     6, 7 at offset 0x55 need to be turned off
- */
-
-#define VIA_8363_KL133_REVISION_ID 0x81
-#define VIA_8363_KM133_REVISION_ID 0x84
-
-static void __init pci_fixup_via_northbridge_bug(struct pci_dev *d)
-{
-	u8 v;
-	u8 revision;
-	int where = 0x55;
-	int mask = 0x1f; /* clear bits 5, 6, 7 by default */
-
-	pci_read_config_byte(d, PCI_REVISION_ID, &revision);
-
-	if (d->device == PCI_DEVICE_ID_VIA_8367_0) {
-  	        where = 0x95; /* the memory write queue timer register is 
-				different for the KT266x's: 0x95 not 0x55 */
-	} else if (d->device == PCI_DEVICE_ID_VIA_8363_0 &&
-			(revision == VIA_8363_KL133_REVISION_ID || 
-			revision == VIA_8363_KM133_REVISION_ID)) {
-			mask = 0x3f; /* clear only bits 6 and 7; clearing bit 5
-					causes screen corruption on the KL133/KM133 */
-	}
-
-        pci_read_config_byte(d, where, &v);
-	if (v & ~mask) {
-		printk("Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \
-			d->device, revision, where, v, mask, v & mask);
-		v &= mask;
-		pci_write_config_byte(d, where, v);
-	}
-}
-
-struct pci_fixup pcibios_fixups[] = {
-	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82451NX,	pci_fixup_i450nx },
-	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82454GX,	pci_fixup_i450gx },
-	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_UMC,	PCI_DEVICE_ID_UMC_UM8886BF,	pci_fixup_umc_ide },
-	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_5513,		pci_fixup_ide_trash },
-	{ PCI_FIXUP_HEADER,	PCI_ANY_ID,		PCI_ANY_ID,			pci_fixup_ide_bases },
-	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_5597,		pci_fixup_latency },
-	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_5598,		pci_fixup_latency },
- 	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82371AB_3,	pci_fixup_piix4_acpi },
-	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8363_0,	pci_fixup_via_northbridge_bug },
-	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8622,	        pci_fixup_via_northbridge_bug },
-	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8361,	        pci_fixup_via_northbridge_bug },
-	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8367_0,	pci_fixup_via_northbridge_bug },
-	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_NCR,	PCI_DEVICE_ID_NCR_53C810,	pci_fixup_ncr53c810 },
-	{ 0 }
-};
-
-/*
- *  Called after each bus is probed, but before its children
- *  are examined.
- */
-
-void __devinit  pcibios_fixup_bus(struct pci_bus *b)
-{
-	pcibios_fixup_ghosts(b);
-	pci_read_bridge_bases(b);
-}
-
-
-struct pci_bus * __devinit pcibios_scan_root(int busnum)
-{
-	struct list_head *list;
-	struct pci_bus *bus;
-
-	list_for_each(list, &pci_root_buses) {
-		bus = pci_bus_b(list);
-		if (bus->number == busnum) {
-			/* Already scanned */
-			return bus;
-		}
-	}
-
-	printk("PCI: Probing PCI hardware (bus %02x)\n", busnum);
-
-	return pci_scan_bus(busnum, pci_root_ops, NULL);
-}
-
-void __devinit pcibios_config_init(void)
-{
-	struct pci_ops *tmp=NULL;
-
-	/*
-	 * Try all known PCI access methods. Note that we support using 
-	 * both PCI BIOS and direct access, with a preference for direct.
-	 */
-
-#ifdef CONFIG_PCI_BIOS
 	if ((pci_probe & PCI_PROBE_BIOS) 
 		&& ((pci_root_ops = pci_find_bios()))) {
 		pci_probe |= PCI_BIOS_SORT;
@@ -1311,133 +553,7 @@ void __devinit pcibios_config_init(void)
 		pci_config_read = pci_bios_read;
 		pci_config_write = pci_bios_write;
 	}
-#endif
-	tmp = pci_root_ops;
-
-#ifdef CONFIG_PCI_DIRECT
-	if ((pci_probe & (PCI_PROBE_CONF1 | PCI_PROBE_CONF2)) 
-		&& (pci_root_ops = pci_check_direct())) {
-		if (pci_root_ops == &pci_direct_conf1) {
-			pci_config_read = pci_conf1_read;
-			pci_config_write = pci_conf1_write;
-		}
-		else {
-			pci_config_read = pci_conf2_read;
-			pci_config_write = pci_conf2_write;
-		}
-	}
-#endif
-
-	/* if direct access failed, fall back to BIOS access. */
-	if (pci_root_ops == NULL)
-		pci_root_ops = tmp;
-
-	return;
-}
-
-void __init pcibios_init(void)
-{
-	int quad;
-
-	if (!pci_root_ops)
-		pcibios_config_init();
-	if (!pci_root_ops) {
-		printk("PCI: System does not support PCI\n");
-		return;
-	}
-
-	printk("PCI: Probing PCI hardware\n");
-	pci_root_bus = pcibios_scan_root(0);
-	if (clustered_apic_mode && (numnodes > 1)) {
-		for (quad = 1; quad < numnodes; ++quad) {
-			printk("Scanning PCI bus %d for quad %d\n", 
-				QUADLOCAL2BUS(quad,0), quad);
-			pci_scan_bus(QUADLOCAL2BUS(quad,0), 
-				pci_root_ops, NULL);
-		}
-	}
-
-	pcibios_irq_init();
-
-	if (!pci_use_acpi_routing)
-		pcibios_fixup_peer_bridges();
-
-	pcibios_fixup_irqs();
-	pcibios_resource_survey();
-
-#ifdef CONFIG_PCI_BIOS
-	if ((pci_probe & PCI_BIOS_SORT) && !(pci_probe & PCI_NO_SORT))
-		pcibios_sort();
-#endif
-}
-
-char * __devinit  pcibios_setup(char *str)
-{
-	if (!strcmp(str, "off")) {
-		pci_probe = 0;
-		return NULL;
-	}
-#ifdef CONFIG_PCI_BIOS
-	else if (!strcmp(str, "bios")) {
-		pci_probe = PCI_PROBE_BIOS;
-		return NULL;
-	} else if (!strcmp(str, "nobios")) {
-		pci_probe &= ~PCI_PROBE_BIOS;
-		return NULL;
-	} else if (!strcmp(str, "nosort")) {
-		pci_probe |= PCI_NO_SORT;
-		return NULL;
-	} else if (!strcmp(str, "biosirq")) {
-		pci_probe |= PCI_BIOS_IRQ_SCAN;
-		return NULL;
-	}
-#endif
-#ifdef CONFIG_PCI_DIRECT
-	else if (!strcmp(str, "conf1")) {
-		pci_probe = PCI_PROBE_CONF1 | PCI_NO_CHECKS;
-		return NULL;
-	}
-	else if (!strcmp(str, "conf2")) {
-		pci_probe = PCI_PROBE_CONF2 | PCI_NO_CHECKS;
-		return NULL;
-	}
-#endif
-#ifdef CONFIG_ACPI_PCI
-	else if (!strcmp(str, "noacpi")) {
-		pci_probe |= PCI_NO_ACPI_ROUTING;
-		return NULL;
-	}
-#endif
-	else if (!strcmp(str, "rom")) {
-		pci_probe |= PCI_ASSIGN_ROMS;
-		return NULL;
-	} else if (!strcmp(str, "assign-busses")) {
-		pci_probe |= PCI_ASSIGN_ALL_BUSSES;
-		return NULL;
-	} else if (!strcmp(str, "usepirqmask")) {
-		pci_probe |= PCI_USE_PIRQ_MASK;
-		return NULL;
-	} else if (!strncmp(str, "irqmask=", 8)) {
-		pcibios_irq_mask = simple_strtol(str+8, NULL, 0);
-		return NULL;
-	} else if (!strncmp(str, "lastbus=", 8)) {
-		pcibios_last_bus = simple_strtol(str+8, NULL, 0);
-		return NULL;
-	}
-	return str;
-}
-
-unsigned int pcibios_assign_all_busses(void)
-{
-	return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0;
-}
-
-int pcibios_enable_device(struct pci_dev *dev)
-{
-	int err;
-
-	if ((err = pcibios_enable_resources(dev)) < 0)
-		return err;
-	pcibios_enable_irq(dev);
 	return 0;
 }
+
+subsys_initcall(pci_pcbios_init);

arch/i386/kernel/pci-i386.h → arch/i386/kernel/pci/pci.h

@@ -67,7 +67,9 @@ struct irq_routing_table {
 extern unsigned int pcibios_irq_mask;
 
 extern int pci_use_acpi_routing;
+extern spinlock_t pci_config_lock;
 
-void pcibios_irq_init(void);
 void pcibios_fixup_irqs(void);
 void pcibios_enable_irq(struct pci_dev *dev);
+
+extern int (*pci_lookup_irq)(struct pci_dev * dev, int assign);

drivers/acpi/acpi_osl.c

@@ -77,12 +77,13 @@ acpi_os_initialize(void)
 	 * Initialize PCI configuration space access, as we'll need to access
 	 * it while walking the namespace (bus 0 and root bridges w/ _BBNs).
 	 */
+#if 0
 	pcibios_config_init();
 	if (!pci_config_read || !pci_config_write) {
 		printk(KERN_ERR PREFIX "Access to PCI configuration space unavailable\n");
 		return AE_NULL_ENTRY;
 	}
-
+#endif
 	return AE_OK;
 }
 

drivers/hotplug/cpqphp_core.c

@@ -38,7 +38,7 @@
 #include <asm/uaccess.h>
 #include "cpqphp.h"
 #include "cpqphp_nvram.h"
-#include "../../arch/i386/kernel/pci-i386.h"	/* horrible hack showing how processor dependant we are... */
+#include "../../arch/i386/kernel/pci/pci.h"	/* horrible hack showing how processor dependant we are... */
 
 
 /* Global variables */

drivers/hotplug/cpqphp_pci.c

@@ -35,7 +35,7 @@
 #include <linux/pci.h>
 #include "cpqphp.h"
 #include "cpqphp_nvram.h"
-#include "../../arch/i386/kernel/pci-i386.h"	/* horrible hack showing how processor dependant we are... */
+#include "../../arch/i386/kernel/pci/pci.h"	/* horrible hack showing how processor dependant we are... */
 
 
 u8 cpqhp_nic_irq;

drivers/hotplug/ibmphp_core.c

@@ -35,7 +35,7 @@
 #include <linux/delay.h>
 #include <linux/wait.h>
 #include <linux/smp_lock.h>
-#include "../../arch/i386/kernel/pci-i386.h"	/* for struct irq_routing_table */
+#include "../../arch/i386/kernel/pci/pci.h"	/* for struct irq_routing_table */
 #include "ibmphp.h"
 
 #define attn_on(sl)  ibmphp_hpc_writeslot (sl, HPC_SLOT_ATTNON)

drivers/pci/Makefile

@@ -11,9 +11,11 @@
 
 O_TARGET := driver.o
 
-export-objs := pci.o
+obj-y		+= access.o probe.o pci.o pool.o quirks.o \
+			compat.o names.o pci-driver.o search.o
+obj-$(CONFIG_PM)  += power.o
+obj-$(CONFIG_HOTPLUG)  += hotplug.o
 
-obj-$(CONFIG_PCI) += pci.o quirks.o compat.o names.o pci-driver.o
 obj-$(CONFIG_PROC_FS) += proc.o
 
 ifndef CONFIG_SPARC64
@@ -35,6 +37,8 @@ ifndef CONFIG_X86
 obj-y += syscall.o
 endif
 
+export-objs := $(obj-y)
+
 include $(TOPDIR)/Rules.make
 
 names.o: names.c devlist.h classlist.h

drivers/pci/access.c

+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+
+/*
+ * This interrupt-safe spinlock protects all accesses to PCI
+ * configuration space.
+ */
+
+static spinlock_t pci_lock = SPIN_LOCK_UNLOCKED;
+
+/*
+ *  Wrappers for all PCI configuration access functions.  They just check
+ *  alignment, do locking and call the low-level functions pointed to
+ *  by pci_dev->ops.
+ */
+
+#define PCI_byte_BAD 0
+#define PCI_word_BAD (pos & 1)
+#define PCI_dword_BAD (pos & 3)
+
+#define PCI_OP(rw,size,type) \
+int pci_##rw##_config_##size (struct pci_dev *dev, int pos, type value) \
+{									\
+	int res;							\
+	unsigned long flags;						\
+	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER;	\
+	spin_lock_irqsave(&pci_lock, flags);				\
+	res = dev->bus->ops->rw##_##size(dev, pos, value);		\
+	spin_unlock_irqrestore(&pci_lock, flags);			\
+	return res;							\
+}
+
+PCI_OP(read, byte, u8 *)
+PCI_OP(read, word, u16 *)
+PCI_OP(read, dword, u32 *)
+PCI_OP(write, byte, u8)
+PCI_OP(write, word, u16)
+PCI_OP(write, dword, u32)
+
+EXPORT_SYMBOL(pci_read_config_byte);
+EXPORT_SYMBOL(pci_read_config_word);
+EXPORT_SYMBOL(pci_read_config_dword);
+EXPORT_SYMBOL(pci_write_config_byte);
+EXPORT_SYMBOL(pci_write_config_word);
+EXPORT_SYMBOL(pci_write_config_dword);

drivers/pci/hotplug.c

+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/kmod.h>		/* for hotplug_path */
+
+extern struct list_head pci_drivers;
+extern int pci_announce_device(struct pci_driver *drv, struct pci_dev *dev);
+
+#ifndef FALSE
+#define FALSE	(0)
+#define TRUE	(!FALSE)
+#endif
+
+static void
+run_sbin_hotplug(struct pci_dev *pdev, int insert)
+{
+	int i;
+	char *argv[3], *envp[8];
+	char id[20], sub_id[24], bus_id[24], class_id[20];
+
+	if (!hotplug_path[0])
+		return;
+
+	sprintf(class_id, "PCI_CLASS=%04X", pdev->class);
+	sprintf(id, "PCI_ID=%04X:%04X", pdev->vendor, pdev->device);
+	sprintf(sub_id, "PCI_SUBSYS_ID=%04X:%04X", pdev->subsystem_vendor, pdev->subsystem_device);
+	sprintf(bus_id, "PCI_SLOT_NAME=%s", pdev->slot_name);
+
+	i = 0;
+	argv[i++] = hotplug_path;
+	argv[i++] = "pci";
+	argv[i] = 0;
+
+	i = 0;
+	/* minimal command environment */
+	envp[i++] = "HOME=/";
+	envp[i++] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
+	
+	/* other stuff we want to pass to /sbin/hotplug */
+	envp[i++] = class_id;
+	envp[i++] = id;
+	envp[i++] = sub_id;
+	envp[i++] = bus_id;
+	if (insert)
+		envp[i++] = "ACTION=add";
+	else
+		envp[i++] = "ACTION=remove";
+	envp[i] = 0;
+
+	call_usermodehelper (argv [0], argv, envp);
+}
+
+/**
+ * pci_announce_device_to_drivers - tell the drivers a new device has appeared
+ * @dev: the device that has shown up
+ *
+ * Notifys the drivers that a new device has appeared, and also notifys
+ * userspace through /sbin/hotplug.
+ */
+void
+pci_announce_device_to_drivers(struct pci_dev *dev)
+{
+	struct list_head *ln;
+
+	for(ln=pci_drivers.next; ln != &pci_drivers; ln=ln->next) {
+		struct pci_driver *drv = list_entry(ln, struct pci_driver, node);
+		if (drv->remove && pci_announce_device(drv, dev))
+			break;
+	}
+
+	/* notify userspace of new hotplug device */
+	run_sbin_hotplug(dev, TRUE);
+}
+
+/**
+ * pci_insert_device - insert a hotplug device
+ * @dev: the device to insert
+ * @bus: where to insert it
+ *
+ * Add a new device to the device lists and notify userspace (/sbin/hotplug).
+ */
+void
+pci_insert_device(struct pci_dev *dev, struct pci_bus *bus)
+{
+	list_add_tail(&dev->bus_list, &bus->devices);
+	list_add_tail(&dev->global_list, &pci_devices);
+#ifdef CONFIG_PROC_FS
+	pci_proc_attach_device(dev);
+#endif
+	pci_announce_device_to_drivers(dev);
+}
+
+static void
+pci_free_resources(struct pci_dev *dev)
+{
+	int i;
+
+	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+		struct resource *res = dev->resource + i;
+		if (res->parent)
+			release_resource(res);
+	}
+}
+
+/**
+ * pci_remove_device - remove a hotplug device
+ * @dev: the device to remove
+ *
+ * Delete the device structure from the device lists and 
+ * notify userspace (/sbin/hotplug).
+ */
+void
+pci_remove_device(struct pci_dev *dev)
+{
+	if (dev->driver) {
+		if (dev->driver->remove)
+			dev->driver->remove(dev);
+		dev->driver = NULL;
+	}
+	list_del(&dev->bus_list);
+	list_del(&dev->global_list);
+	pci_free_resources(dev);
+#ifdef CONFIG_PROC_FS
+	pci_proc_detach_device(dev);
+#endif
+
+	/* notify userspace of hotplug device removal */
+	run_sbin_hotplug(dev, FALSE);
+}
+
+EXPORT_SYMBOL(pci_insert_device);
+EXPORT_SYMBOL(pci_remove_device);
+EXPORT_SYMBOL(pci_announce_device_to_drivers);

drivers/pci/pci-driver.c

 /*
- * drivers/pci/pci-driver.c - default PCI driver.
+ * drivers/pci/pci-driver.c
  *
  */
 
 #include <linux/pci.h>
+#include <linux/module.h>
+
+/*
+ *  Registration of PCI drivers and handling of hot-pluggable devices.
+ */
+
+LIST_HEAD(pci_drivers);
+
+/**
+ * pci_match_device - Tell if a PCI device structure has a matching PCI device id structure
+ * @ids: array of PCI device id structures to search in
+ * @dev: the PCI device structure to match against
+ * 
+ * Used by a driver to check whether a PCI device present in the
+ * system is in its list of supported devices.Returns the matching
+ * pci_device_id structure or %NULL if there is no match.
+ */
+const struct pci_device_id *
+pci_match_device(const struct pci_device_id *ids, const struct pci_dev *dev)
+{
+	while (ids->vendor || ids->subvendor || ids->class_mask) {
+		if ((ids->vendor == PCI_ANY_ID || ids->vendor == dev->vendor) &&
+		    (ids->device == PCI_ANY_ID || ids->device == dev->device) &&
+		    (ids->subvendor == PCI_ANY_ID || ids->subvendor == dev->subsystem_vendor) &&
+		    (ids->subdevice == PCI_ANY_ID || ids->subdevice == dev->subsystem_device) &&
+		    !((ids->class ^ dev->class) & ids->class_mask))
+			return ids;
+		ids++;
+	}
+	return NULL;
+}
+
+int
+pci_announce_device(struct pci_driver *drv, struct pci_dev *dev)
+{
+	const struct pci_device_id *id;
+	int ret = 0;
+
+	if (drv->id_table) {
+		id = pci_match_device(drv->id_table, dev);
+		if (!id) {
+			ret = 0;
+			goto out;
+		}
+	} else
+		id = NULL;
+
+	dev_probe_lock();
+	if (drv->probe(dev, id) >= 0) {
+		dev->driver = drv;
+		ret = 1;
+	}
+	dev_probe_unlock();
+out:
+	return ret;
+}
+
+/**
+ * pci_register_driver - register a new pci driver
+ * @drv: the driver structure to register
+ * 
+ * Adds the driver structure to the list of registered drivers
+ * Returns the number of pci devices which were claimed by the driver
+ * during registration.  The driver remains registered even if the
+ * return value is zero.
+ */
+int
+pci_register_driver(struct pci_driver *drv)
+{
+	struct pci_dev *dev;
+	int count = 0;
+
+	list_add_tail(&drv->node, &pci_drivers);
+	pci_for_each_dev(dev) {
+		if (!pci_dev_driver(dev))
+			count += pci_announce_device(drv, dev);
+	}
+	return count;
+}
+
+/**
+ * pci_unregister_driver - unregister a pci driver
+ * @drv: the driver structure to unregister
+ * 
+ * Deletes the driver structure from the list of registered PCI drivers,
+ * gives it a chance to clean up by calling its remove() function for
+ * each device it was responsible for, and marks those devices as
+ * driverless.
+ */
+
+void
+pci_unregister_driver(struct pci_driver *drv)
+{
+	struct pci_dev *dev;
+
+	list_del(&drv->node);
+	pci_for_each_dev(dev) {
+		if (dev->driver == drv) {
+			if (drv->remove)
+				drv->remove(dev);
+			dev->driver = NULL;
+		}
+	}
+}
+
+static struct pci_driver pci_compat_driver = {
+	name: "compat"
+};
+
+/**
+ * pci_dev_driver - get the pci_driver of a device
+ * @dev: the device to query
+ *
+ * Returns the appropriate pci_driver structure or %NULL if there is no 
+ * registered driver for the device.
+ */
+struct pci_driver *
+pci_dev_driver(const struct pci_dev *dev)
+{
+	if (dev->driver)
+		return dev->driver;
+	else {
+		int i;
+		for(i=0; i<=PCI_ROM_RESOURCE; i++)
+			if (dev->resource[i].flags & IORESOURCE_BUSY)
+				return &pci_compat_driver;
+	}
+	return NULL;
+}
 
 static int pci_device_suspend(struct device * dev, u32 state, u32 level)
 {
@@ -34,3 +163,8 @@ struct device_driver pci_device_driver = {
 	suspend:	pci_device_suspend,
 	resume:		pci_device_resume,
 };
+
+EXPORT_SYMBOL(pci_match_device);
+EXPORT_SYMBOL(pci_register_driver);
+EXPORT_SYMBOL(pci_unregister_driver);
+EXPORT_SYMBOL(pci_dev_driver);

drivers/pci/pci.c

@@ -9,23 +9,9 @@
  *	Copyright 1997 -- 2000 Martin Mares <mj@ucw.cz>
  */
 
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
 #include <linux/pci.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
+#include <linux/module.h>
 #include <linux/spinlock.h>
-#include <linux/pm.h>
-#include <linux/kmod.h>		/* for hotplug_path */
-#include <linux/bitops.h>
-#include <linux/delay.h>
-#include <linux/cache.h>
-
-#include <asm/page.h>
 #include <asm/dma.h>	/* isa_dma_bridge_buggy */
 
 #undef DEBUG
@@ -36,114 +22,6 @@
 #define DBG(x...)
 #endif
 
-LIST_HEAD(pci_root_buses);
-LIST_HEAD(pci_devices);
-
-extern struct device_driver pci_device_driver;
-
-/**
- * pci_find_slot - locate PCI device from a given PCI slot
- * @bus: number of PCI bus on which desired PCI device resides
- * @devfn: encodes number of PCI slot in which the desired PCI 
- * device resides and the logical device number within that slot 
- * in case of multi-function devices.
- *
- * Given a PCI bus and slot/function number, the desired PCI device 
- * is located in system global list of PCI devices.  If the device
- * is found, a pointer to its data structure is returned.  If no 
- * device is found, %NULL is returned.
- */
-struct pci_dev *
-pci_find_slot(unsigned int bus, unsigned int devfn)
-{
-	struct pci_dev *dev;
-
-	pci_for_each_dev(dev) {
-		if (dev->bus->number == bus && dev->devfn == devfn)
-			return dev;
-	}
-	return NULL;
-}
-
-/**
- * pci_find_subsys - begin or continue searching for a PCI device by vendor/subvendor/device/subdevice id
- * @vendor: PCI vendor id to match, or %PCI_ANY_ID to match all vendor ids
- * @device: PCI device id to match, or %PCI_ANY_ID to match all device ids
- * @ss_vendor: PCI subsystem vendor id to match, or %PCI_ANY_ID to match all vendor ids
- * @ss_device: PCI subsystem device id to match, or %PCI_ANY_ID to match all device ids
- * @from: Previous PCI device found in search, or %NULL for new search.
- *
- * Iterates through the list of known PCI devices.  If a PCI device is
- * found with a matching @vendor, @device, @ss_vendor and @ss_device, a pointer to its
- * device structure is returned.  Otherwise, %NULL is returned.
- * A new search is initiated by passing %NULL to the @from argument.
- * Otherwise if @from is not %NULL, searches continue from next device on the global list.
- */
-struct pci_dev *
-pci_find_subsys(unsigned int vendor, unsigned int device,
-		unsigned int ss_vendor, unsigned int ss_device,
-		const struct pci_dev *from)
-{
-	struct list_head *n = from ? from->global_list.next : pci_devices.next;
-
-	while (n != &pci_devices) {
-		struct pci_dev *dev = pci_dev_g(n);
-		if ((vendor == PCI_ANY_ID || dev->vendor == vendor) &&
-		    (device == PCI_ANY_ID || dev->device == device) &&
-		    (ss_vendor == PCI_ANY_ID || dev->subsystem_vendor == ss_vendor) &&
-		    (ss_device == PCI_ANY_ID || dev->subsystem_device == ss_device))
-			return dev;
-		n = n->next;
-	}
-	return NULL;
-}
-
-
-/**
- * pci_find_device - begin or continue searching for a PCI device by vendor/device id
- * @vendor: PCI vendor id to match, or %PCI_ANY_ID to match all vendor ids
- * @device: PCI device id to match, or %PCI_ANY_ID to match all device ids
- * @from: Previous PCI device found in search, or %NULL for new search.
- *
- * Iterates through the list of known PCI devices.  If a PCI device is
- * found with a matching @vendor and @device, a pointer to its device structure is
- * returned.  Otherwise, %NULL is returned.
- * A new search is initiated by passing %NULL to the @from argument.
- * Otherwise if @from is not %NULL, searches continue from next device on the global list.
- */
-struct pci_dev *
-pci_find_device(unsigned int vendor, unsigned int device, const struct pci_dev *from)
-{
-	return pci_find_subsys(vendor, device, PCI_ANY_ID, PCI_ANY_ID, from);
-}
-
-
-/**
- * pci_find_class - begin or continue searching for a PCI device by class
- * @class: search for a PCI device with this class designation
- * @from: Previous PCI device found in search, or %NULL for new search.
- *
- * Iterates through the list of known PCI devices.  If a PCI device is
- * found with a matching @class, a pointer to its device structure is
- * returned.  Otherwise, %NULL is returned.
- * A new search is initiated by passing %NULL to the @from argument.
- * Otherwise if @from is not %NULL, searches continue from next device
- * on the global list.
- */
-struct pci_dev *
-pci_find_class(unsigned int class, const struct pci_dev *from)
-{
-	struct list_head *n = from ? from->global_list.next : pci_devices.next;
-
-	while (n != &pci_devices) {
-		struct pci_dev *dev = pci_dev_g(n);
-		if (dev->class == class)
-			return dev;
-		n = n->next;
-	}
-	return NULL;
-}
-
 /**
  * pci_find_capability - query for devices' capabilities 
  * @dev: PCI device to query
@@ -536,298 +414,6 @@ int pci_request_regions(struct pci_dev *pdev, char *res_name)
 	return -EBUSY;
 }
 
-
-/*
- *  Registration of PCI drivers and handling of hot-pluggable devices.
- */
-
-static LIST_HEAD(pci_drivers);
-
-/**
- * pci_match_device - Tell if a PCI device structure has a matching PCI device id structure
- * @ids: array of PCI device id structures to search in
- * @dev: the PCI device structure to match against
- * 
- * Used by a driver to check whether a PCI device present in the
- * system is in its list of supported devices.Returns the matching
- * pci_device_id structure or %NULL if there is no match.
- */
-const struct pci_device_id *
-pci_match_device(const struct pci_device_id *ids, const struct pci_dev *dev)
-{
-	while (ids->vendor || ids->subvendor || ids->class_mask) {
-		if ((ids->vendor == PCI_ANY_ID || ids->vendor == dev->vendor) &&
-		    (ids->device == PCI_ANY_ID || ids->device == dev->device) &&
-		    (ids->subvendor == PCI_ANY_ID || ids->subvendor == dev->subsystem_vendor) &&
-		    (ids->subdevice == PCI_ANY_ID || ids->subdevice == dev->subsystem_device) &&
-		    !((ids->class ^ dev->class) & ids->class_mask))
-			return ids;
-		ids++;
-	}
-	return NULL;
-}
-
-static int
-pci_announce_device(struct pci_driver *drv, struct pci_dev *dev)
-{
-	const struct pci_device_id *id;
-	int ret = 0;
-
-	if (drv->id_table) {
-		id = pci_match_device(drv->id_table, dev);
-		if (!id) {
-			ret = 0;
-			goto out;
-		}
-	} else
-		id = NULL;
-
-	dev_probe_lock();
-	if (drv->probe(dev, id) >= 0) {
-		dev->driver = drv;
-		ret = 1;
-	}
-	dev_probe_unlock();
-out:
-	return ret;
-}
-
-/**
- * pci_register_driver - register a new pci driver
- * @drv: the driver structure to register
- * 
- * Adds the driver structure to the list of registered drivers
- * Returns the number of pci devices which were claimed by the driver
- * during registration.  The driver remains registered even if the
- * return value is zero.
- */
-int
-pci_register_driver(struct pci_driver *drv)
-{
-	struct pci_dev *dev;
-	int count = 0;
-
-	list_add_tail(&drv->node, &pci_drivers);
-	pci_for_each_dev(dev) {
-		if (!pci_dev_driver(dev))
-			count += pci_announce_device(drv, dev);
-	}
-	return count;
-}
-
-/**
- * pci_unregister_driver - unregister a pci driver
- * @drv: the driver structure to unregister
- * 
- * Deletes the driver structure from the list of registered PCI drivers,
- * gives it a chance to clean up by calling its remove() function for
- * each device it was responsible for, and marks those devices as
- * driverless.
- */
-
-void
-pci_unregister_driver(struct pci_driver *drv)
-{
-	struct pci_dev *dev;
-
-	list_del(&drv->node);
-	pci_for_each_dev(dev) {
-		if (dev->driver == drv) {
-			if (drv->remove)
-				drv->remove(dev);
-			dev->driver = NULL;
-		}
-	}
-}
-
-#ifdef CONFIG_HOTPLUG
-
-#ifndef FALSE
-#define FALSE	(0)
-#define TRUE	(!FALSE)
-#endif
-
-static void
-run_sbin_hotplug(struct pci_dev *pdev, int insert)
-{
-	int i;
-	char *argv[3], *envp[8];
-	char id[20], sub_id[24], bus_id[24], class_id[20];
-
-	if (!hotplug_path[0])
-		return;
-
-	sprintf(class_id, "PCI_CLASS=%04X", pdev->class);
-	sprintf(id, "PCI_ID=%04X:%04X", pdev->vendor, pdev->device);
-	sprintf(sub_id, "PCI_SUBSYS_ID=%04X:%04X", pdev->subsystem_vendor, pdev->subsystem_device);
-	sprintf(bus_id, "PCI_SLOT_NAME=%s", pdev->slot_name);
-
-	i = 0;
-	argv[i++] = hotplug_path;
-	argv[i++] = "pci";
-	argv[i] = 0;
-
-	i = 0;
-	/* minimal command environment */
-	envp[i++] = "HOME=/";
-	envp[i++] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
-	
-	/* other stuff we want to pass to /sbin/hotplug */
-	envp[i++] = class_id;
-	envp[i++] = id;
-	envp[i++] = sub_id;
-	envp[i++] = bus_id;
-	if (insert)
-		envp[i++] = "ACTION=add";
-	else
-		envp[i++] = "ACTION=remove";
-	envp[i] = 0;
-
-	call_usermodehelper (argv [0], argv, envp);
-}
-
-/**
- * pci_announce_device_to_drivers - tell the drivers a new device has appeared
- * @dev: the device that has shown up
- *
- * Notifys the drivers that a new device has appeared, and also notifys
- * userspace through /sbin/hotplug.
- */
-void
-pci_announce_device_to_drivers(struct pci_dev *dev)
-{
-	struct list_head *ln;
-
-	for(ln=pci_drivers.next; ln != &pci_drivers; ln=ln->next) {
-		struct pci_driver *drv = list_entry(ln, struct pci_driver, node);
-		if (drv->remove && pci_announce_device(drv, dev))
-			break;
-	}
-
-	/* notify userspace of new hotplug device */
-	run_sbin_hotplug(dev, TRUE);
-}
-
-/**
- * pci_insert_device - insert a hotplug device
- * @dev: the device to insert
- * @bus: where to insert it
- *
- * Add a new device to the device lists and notify userspace (/sbin/hotplug).
- */
-void
-pci_insert_device(struct pci_dev *dev, struct pci_bus *bus)
-{
-	list_add_tail(&dev->bus_list, &bus->devices);
-	list_add_tail(&dev->global_list, &pci_devices);
-#ifdef CONFIG_PROC_FS
-	pci_proc_attach_device(dev);
-#endif
-	pci_announce_device_to_drivers(dev);
-}
-
-static void
-pci_free_resources(struct pci_dev *dev)
-{
-	int i;
-
-	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-		struct resource *res = dev->resource + i;
-		if (res->parent)
-			release_resource(res);
-	}
-}
-
-/**
- * pci_remove_device - remove a hotplug device
- * @dev: the device to remove
- *
- * Delete the device structure from the device lists and 
- * notify userspace (/sbin/hotplug).
- */
-void
-pci_remove_device(struct pci_dev *dev)
-{
-	if (dev->driver) {
-		if (dev->driver->remove)
-			dev->driver->remove(dev);
-		dev->driver = NULL;
-	}
-	list_del(&dev->bus_list);
-	list_del(&dev->global_list);
-	pci_free_resources(dev);
-#ifdef CONFIG_PROC_FS
-	pci_proc_detach_device(dev);
-#endif
-
-	/* notify userspace of hotplug device removal */
-	run_sbin_hotplug(dev, FALSE);
-}
-
-#endif
-
-static struct pci_driver pci_compat_driver = {
-	name: "compat"
-};
-
-/**
- * pci_dev_driver - get the pci_driver of a device
- * @dev: the device to query
- *
- * Returns the appropriate pci_driver structure or %NULL if there is no 
- * registered driver for the device.
- */
-struct pci_driver *
-pci_dev_driver(const struct pci_dev *dev)
-{
-	if (dev->driver)
-		return dev->driver;
-	else {
-		int i;
-		for(i=0; i<=PCI_ROM_RESOURCE; i++)
-			if (dev->resource[i].flags & IORESOURCE_BUSY)
-				return &pci_compat_driver;
-	}
-	return NULL;
-}
-
-
-/*
- * This interrupt-safe spinlock protects all accesses to PCI
- * configuration space.
- */
-
-static spinlock_t pci_lock = SPIN_LOCK_UNLOCKED;
-
-/*
- *  Wrappers for all PCI configuration access functions.  They just check
- *  alignment, do locking and call the low-level functions pointed to
- *  by pci_dev->ops.
- */
-
-#define PCI_byte_BAD 0
-#define PCI_word_BAD (pos & 1)
-#define PCI_dword_BAD (pos & 3)
-
-#define PCI_OP(rw,size,type) \
-int pci_##rw##_config_##size (struct pci_dev *dev, int pos, type value) \
-{									\
-	int res;							\
-	unsigned long flags;						\
-	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER;	\
-	spin_lock_irqsave(&pci_lock, flags);				\
-	res = dev->bus->ops->rw##_##size(dev, pos, value);		\
-	spin_unlock_irqrestore(&pci_lock, flags);			\
-	return res;							\
-}
-
-PCI_OP(read, byte, u8 *)
-PCI_OP(read, word, u16 *)
-PCI_OP(read, dword, u32 *)
-PCI_OP(write, byte, u8)
-PCI_OP(write, word, u16)
-PCI_OP(write, dword, u32)
-
 /**
  * pci_set_master - enables bus-mastering for device dev
  * @dev: the PCI device to enable
@@ -967,1079 +553,13 @@ pci_dac_set_dma_mask(struct pci_dev *dev, u64 mask)
 	return 0;
 }
 
-/*
- * Translate the low bits of the PCI base
- * to the resource type
- */
-static inline unsigned int pci_calc_resource_flags(unsigned int flags)
-{
-	if (flags & PCI_BASE_ADDRESS_SPACE_IO)
-		return IORESOURCE_IO;
-
-	if (flags & PCI_BASE_ADDRESS_MEM_PREFETCH)
-		return IORESOURCE_MEM | IORESOURCE_PREFETCH;
-
-	return IORESOURCE_MEM;
-}
-
-/*
- * Find the extent of a PCI decode..
- */
-static u32 pci_size(u32 base, unsigned long mask)
-{
-	u32 size = mask & base;		/* Find the significant bits */
-	size = size & ~(size-1);	/* Get the lowest of them to find the decode size */
-	return size-1;			/* extent = size - 1 */
-}
-
-static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
-{
-	unsigned int pos, reg, next;
-	u32 l, sz;
-	struct resource *res;
-
-	for(pos=0; pos<howmany; pos = next) {
-		next = pos+1;
-		res = &dev->resource[pos];
-		res->name = dev->name;
-		reg = PCI_BASE_ADDRESS_0 + (pos << 2);
-		pci_read_config_dword(dev, reg, &l);
-		pci_write_config_dword(dev, reg, ~0);
-		pci_read_config_dword(dev, reg, &sz);
-		pci_write_config_dword(dev, reg, l);
-		if (!sz || sz == 0xffffffff)
-			continue;
-		if (l == 0xffffffff)
-			l = 0;
-		if ((l & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_MEMORY) {
-			res->start = l & PCI_BASE_ADDRESS_MEM_MASK;
-			res->flags |= l & ~PCI_BASE_ADDRESS_MEM_MASK;
-			sz = pci_size(sz, PCI_BASE_ADDRESS_MEM_MASK);
-		} else {
-			res->start = l & PCI_BASE_ADDRESS_IO_MASK;
-			res->flags |= l & ~PCI_BASE_ADDRESS_IO_MASK;
-			sz = pci_size(sz, PCI_BASE_ADDRESS_IO_MASK & 0xffff);
-		}
-		res->end = res->start + (unsigned long) sz;
-		res->flags |= pci_calc_resource_flags(l);
-		if ((l & (PCI_BASE_ADDRESS_SPACE | PCI_BASE_ADDRESS_MEM_TYPE_MASK))
-		    == (PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64)) {
-			pci_read_config_dword(dev, reg+4, &l);
-			next++;
-#if BITS_PER_LONG == 64
-			res->start |= ((unsigned long) l) << 32;
-			res->end = res->start + sz;
-			pci_write_config_dword(dev, reg+4, ~0);
-			pci_read_config_dword(dev, reg+4, &sz);
-			pci_write_config_dword(dev, reg+4, l);
-			if (~sz)
-				res->end = res->start + 0xffffffff +
-						(((unsigned long) ~sz) << 32);
-#else
-			if (l) {
-				printk(KERN_ERR "PCI: Unable to handle 64-bit address for device %s\n", dev->slot_name);
-				res->start = 0;
-				res->flags = 0;
-				continue;
-			}
-#endif
-		}
-	}
-	if (rom) {
-		dev->rom_base_reg = rom;
-		res = &dev->resource[PCI_ROM_RESOURCE];
-		pci_read_config_dword(dev, rom, &l);
-		pci_write_config_dword(dev, rom, ~PCI_ROM_ADDRESS_ENABLE);
-		pci_read_config_dword(dev, rom, &sz);
-		pci_write_config_dword(dev, rom, l);
-		if (l == 0xffffffff)
-			l = 0;
-		if (sz && sz != 0xffffffff) {
-			res->flags = (l & PCI_ROM_ADDRESS_ENABLE) |
-			  IORESOURCE_MEM | IORESOURCE_PREFETCH | IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
-			res->start = l & PCI_ROM_ADDRESS_MASK;
-			sz = pci_size(sz, PCI_ROM_ADDRESS_MASK);
-			res->end = res->start + (unsigned long) sz;
-		}
-		res->name = dev->name;
-	}
-}
-
-void __devinit pci_read_bridge_bases(struct pci_bus *child)
-{
-	struct pci_dev *dev = child->self;
-	u8 io_base_lo, io_limit_lo;
-	u16 mem_base_lo, mem_limit_lo;
-	unsigned long base, limit;
-	struct resource *res;
-	int i;
-
-	if (!dev)		/* It's a host bus, nothing to read */
-		return;
-
-	for(i=0; i<3; i++)
-		child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i];
-
-	res = child->resource[0];
-	pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
-	pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo);
-	base = (io_base_lo & PCI_IO_RANGE_MASK) << 8;
-	limit = (io_limit_lo & PCI_IO_RANGE_MASK) << 8;
-
-	if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
-		u16 io_base_hi, io_limit_hi;
-		pci_read_config_word(dev, PCI_IO_BASE_UPPER16, &io_base_hi);
-		pci_read_config_word(dev, PCI_IO_LIMIT_UPPER16, &io_limit_hi);
-		base |= (io_base_hi << 16);
-		limit |= (io_limit_hi << 16);
-	}
-
-	if (base && base <= limit) {
-		res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO;
-		res->start = base;
-		res->end = limit + 0xfff;
-		res->name = child->name;
-	} else {
-		/*
-		 * Ugh. We don't know enough about this bridge. Just assume
-		 * that it's entirely transparent.
-		 */
-		printk(KERN_ERR "Unknown bridge resource %d: assuming transparent\n", 0);
-		child->resource[0] = child->parent->resource[0];
-	}
-
-	res = child->resource[1];
-	pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo);
-	pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo);
-	base = (mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16;
-	limit = (mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16;
-	if (base && base <= limit) {
-		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
-		res->start = base;
-		res->end = limit + 0xfffff;
-		res->name = child->name;
-	} else {
-		/* See comment above. Same thing */
-		printk(KERN_ERR "Unknown bridge resource %d: assuming transparent\n", 1);
-		child->resource[1] = child->parent->resource[1];
-	}
-
-	res = child->resource[2];
-	pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
-	pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo);
-	base = (mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
-	limit = (mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;
-
-	if ((mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
-		u32 mem_base_hi, mem_limit_hi;
-		pci_read_config_dword(dev, PCI_PREF_BASE_UPPER32, &mem_base_hi);
-		pci_read_config_dword(dev, PCI_PREF_LIMIT_UPPER32, &mem_limit_hi);
-#if BITS_PER_LONG == 64
-		base |= ((long) mem_base_hi) << 32;
-		limit |= ((long) mem_limit_hi) << 32;
-#else
-		if (mem_base_hi || mem_limit_hi) {
-			printk(KERN_ERR "PCI: Unable to handle 64-bit address space for %s\n", child->name);
-			return;
-		}
-#endif
-	}
-	if (base && base <= limit) {
-		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH;
-		res->start = base;
-		res->end = limit + 0xfffff;
-		res->name = child->name;
-	} else {
-		/* See comments above */
-		printk(KERN_ERR "Unknown bridge resource %d: assuming transparent\n", 2);
-		child->resource[2] = child->parent->resource[2];
-	}
-}
-
-static struct pci_bus * __devinit pci_alloc_bus(void)
-{
-	struct pci_bus *b;
-
-	b = kmalloc(sizeof(*b), GFP_KERNEL);
-	if (b) {
-		memset(b, 0, sizeof(*b));
-		INIT_LIST_HEAD(&b->children);
-		INIT_LIST_HEAD(&b->devices);
-	}
-	return b;
-}
-
-struct pci_bus * __devinit pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, int busnr)
-{
-	struct pci_bus *child;
-	int i;
-
-	/*
-	 * Allocate a new bus, and inherit stuff from the parent..
-	 */
-	child = pci_alloc_bus();
-
-	list_add_tail(&child->node, &parent->children);
-	child->self = dev;
-	dev->subordinate = child;
-	child->parent = parent;
-	child->ops = parent->ops;
-	child->sysdata = parent->sysdata;
-	child->dev = &dev->dev;
-
-	/*
-	 * Set up the primary, secondary and subordinate
-	 * bus numbers.
-	 */
-	child->number = child->secondary = busnr;
-	child->primary = parent->secondary;
-	child->subordinate = 0xff;
-
-	/* Set up default resource pointers.. */
-	for (i = 0; i < 4; i++)
-		child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i];
-
-	return child;
-}
-
-unsigned int __devinit pci_do_scan_bus(struct pci_bus *bus);
-
-/*
- * If it's a bridge, configure it and scan the bus behind it.
- * For CardBus bridges, we don't scan behind as the devices will
- * be handled by the bridge driver itself.
- *
- * We need to process bridges in two passes -- first we scan those
- * already configured by the BIOS and after we are done with all of
- * them, we proceed to assigning numbers to the remaining buses in
- * order to avoid overlaps between old and new bus numbers.
- */
-static int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max, int pass)
-{
-	unsigned int buses;
-	unsigned short cr;
-	struct pci_bus *child;
-	int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
-
-	pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
-	DBG("Scanning behind PCI bridge %s, config %06x, pass %d\n", dev->slot_name, buses & 0xffffff, pass);
-	if ((buses & 0xffff00) && !pcibios_assign_all_busses()) {
-		/*
-		 * Bus already configured by firmware, process it in the first
-		 * pass and just note the configuration.
-		 */
-		if (pass)
-			return max;
-		child = pci_add_new_bus(bus, dev, 0);
-		child->primary = buses & 0xFF;
-		child->secondary = (buses >> 8) & 0xFF;
-		child->subordinate = (buses >> 16) & 0xFF;
-		child->number = child->secondary;
-		if (!is_cardbus) {
-			unsigned int cmax = pci_do_scan_bus(child);
-			if (cmax > max) max = cmax;
-		} else {
-			unsigned int cmax = child->subordinate;
-			if (cmax > max) max = cmax;
-		}
-	} else {
-		/*
-		 * We need to assign a number to this bus which we always
-		 * do in the second pass. We also keep all address decoders
-		 * on the bridge disabled during scanning.  FIXME: Why?
-		 */
-		if (!pass)
-			return max;
-		pci_read_config_word(dev, PCI_COMMAND, &cr);
-		pci_write_config_word(dev, PCI_COMMAND, 0x0000);
-		pci_write_config_word(dev, PCI_STATUS, 0xffff);
-
-		child = pci_add_new_bus(bus, dev, ++max);
-		buses = (buses & 0xff000000)
-		      | ((unsigned int)(child->primary)     <<  0)
-		      | ((unsigned int)(child->secondary)   <<  8)
-		      | ((unsigned int)(child->subordinate) << 16);
-		/*
-		 * We need to blast all three values with a single write.
-		 */
-		pci_write_config_dword(dev, PCI_PRIMARY_BUS, buses);
-		if (!is_cardbus) {
-			/* Now we can scan all subordinate buses... */
-			max = pci_do_scan_bus(child);
-		} else {
-			/*
-			 * For CardBus bridges, we leave 4 bus numbers
-			 * as cards with a PCI-to-PCI bridge can be
-			 * inserted later.
-			 */
-			max += 3;
-		}
-		/*
-		 * Set the subordinate bus number to its real value.
-		 */
-		child->subordinate = max;
-		pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max);
-		pci_write_config_word(dev, PCI_COMMAND, cr);
-	}
-	sprintf(child->name, (is_cardbus ? "PCI CardBus #%02x" : "PCI Bus #%02x"), child->number);
-
-	return max;
-}
-
-/*
- * Read interrupt line and base address registers.
- * The architecture-dependent code can tweak these, of course.
- */
-static void pci_read_irq(struct pci_dev *dev)
-{
-	unsigned char irq;
-
-	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq);
-	if (irq)
-		pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
-	dev->irq = irq;
-}
-
-/**
- * pci_setup_device - fill in class and map information of a device
- * @dev: the device structure to fill
- *
- * Initialize the device structure with information about the device's 
- * vendor,class,memory and IO-space addresses,IRQ lines etc.
- * Called at initialisation of the PCI subsystem and by CardBus services.
- * Returns 0 on success and -1 if unknown type of device (not normal, bridge
- * or CardBus).
- */
-int pci_setup_device(struct pci_dev * dev)
-{
-	u32 class;
-
-	sprintf(dev->slot_name, "%02x:%02x.%d", dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-	sprintf(dev->name, "PCI device %04x:%04x", dev->vendor, dev->device);
-	
-	pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
-	class >>= 8;				    /* upper 3 bytes */
-	dev->class = class;
-	class >>= 8;
-
-	DBG("Found %02x:%02x [%04x/%04x] %06x %02x\n", dev->bus->number, dev->devfn, dev->vendor, dev->device, class, dev->hdr_type);
-
-	/* "Unknown power state" */
-	dev->current_state = 4;
-
-	switch (dev->hdr_type) {		    /* header type */
-	case PCI_HEADER_TYPE_NORMAL:		    /* standard header */
-		if (class == PCI_CLASS_BRIDGE_PCI)
-			goto bad;
-		pci_read_irq(dev);
-		pci_read_bases(dev, 6, PCI_ROM_ADDRESS);
-		pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
-		pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &dev->subsystem_device);
-		break;
-
-	case PCI_HEADER_TYPE_BRIDGE:		    /* bridge header */
-		if (class != PCI_CLASS_BRIDGE_PCI)
-			goto bad;
-		pci_read_bases(dev, 2, PCI_ROM_ADDRESS1);
-		break;
-
-	case PCI_HEADER_TYPE_CARDBUS:		    /* CardBus bridge header */
-		if (class != PCI_CLASS_BRIDGE_CARDBUS)
-			goto bad;
-		pci_read_irq(dev);
-		pci_read_bases(dev, 1, 0);
-		pci_read_config_word(dev, PCI_CB_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
-		pci_read_config_word(dev, PCI_CB_SUBSYSTEM_ID, &dev->subsystem_device);
-		break;
-
-	default:				    /* unknown header */
-		printk(KERN_ERR "PCI: device %s has unknown header type %02x, ignoring.\n",
-			dev->slot_name, dev->hdr_type);
-		return -1;
-
-	bad:
-		printk(KERN_ERR "PCI: %s: class %x doesn't match header type %02x. Ignoring class.\n",
-		       dev->slot_name, class, dev->hdr_type);
-		dev->class = PCI_CLASS_NOT_DEFINED;
-	}
-
-	/* We found a fine healthy device, go go go... */
-	return 0;
-}
-
-/*
- * Read the config data for a PCI device, sanity-check it
- * and fill in the dev structure...
- */
-struct pci_dev * __devinit pci_scan_device(struct pci_dev *temp)
-{
-	struct pci_dev *dev;
-	u32 l;
-
-	if (pci_read_config_dword(temp, PCI_VENDOR_ID, &l))
-		return NULL;
-
-	/* some broken boards return 0 or ~0 if a slot is empty: */
-	if (l == 0xffffffff || l == 0x00000000 || l == 0x0000ffff || l == 0xffff0000)
-		return NULL;
-
-	dev = kmalloc(sizeof(*dev), GFP_KERNEL);
-	if (!dev)
-		return NULL;
-
-	memcpy(dev, temp, sizeof(*dev));
-	dev->vendor = l & 0xffff;
-	dev->device = (l >> 16) & 0xffff;
-
-	/* Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer)
-	   set this higher, assuming the system even supports it.  */
-	dev->dma_mask = 0xffffffff;
-	if (pci_setup_device(dev) < 0) {
-		kfree(dev);
-		return NULL;
-	}
-
-	/* now put in global tree */
-	strcpy(dev->dev.name,dev->name);
-	strcpy(dev->dev.bus_id,dev->slot_name);
-
-	device_register(&dev->dev);
-	return dev;
-}
-
-struct pci_dev * __devinit pci_scan_slot(struct pci_dev *temp)
-{
-	struct pci_bus *bus = temp->bus;
-	struct pci_dev *dev;
-	struct pci_dev *first_dev = NULL;
-	int func = 0;
-	int is_multi = 0;
-	u8 hdr_type;
-
-	for (func = 0; func < 8; func++, temp->devfn++) {
-		if (func && !is_multi)		/* not a multi-function device */
-			continue;
-		if (pci_read_config_byte(temp, PCI_HEADER_TYPE, &hdr_type))
-			continue;
-		temp->hdr_type = hdr_type & 0x7f;
-
-		dev = pci_scan_device(temp);
-		if (!dev)
-			continue;
-		pci_name_device(dev);
-		if (!func) {
-			is_multi = hdr_type & 0x80;
-			first_dev = dev;
-		}
-
-		/*
-		 * Link the device to both the global PCI device chain and
-		 * the per-bus list of devices.
-		 */
-		list_add_tail(&dev->global_list, &pci_devices);
-		list_add_tail(&dev->bus_list, &bus->devices);
-
-		/* Fix up broken headers */
-		pci_fixup_device(PCI_FIXUP_HEADER, dev);
-	}
-	return first_dev;
-}
-
-unsigned int __devinit pci_do_scan_bus(struct pci_bus *bus)
-{
-	unsigned int devfn, max, pass;
-	struct list_head *ln;
-	struct pci_dev *dev, dev0;
-
-	DBG("Scanning bus %02x\n", bus->number);
-	max = bus->secondary;
-
-	/* Create a device template */
-	memset(&dev0, 0, sizeof(dev0));
-	dev0.bus = bus;
-	dev0.sysdata = bus->sysdata;
-	dev0.dev.parent = bus->dev;
-	dev0.dev.driver = &pci_device_driver;
-
-	/* Go find them, Rover! */
-	for (devfn = 0; devfn < 0x100; devfn += 8) {
-		dev0.devfn = devfn;
-		pci_scan_slot(&dev0);
-	}
-
-	/*
-	 * After performing arch-dependent fixup of the bus, look behind
-	 * all PCI-to-PCI bridges on this bus.
-	 */
-	DBG("Fixups for bus %02x\n", bus->number);
-	pcibios_fixup_bus(bus);
-	for (pass=0; pass < 2; pass++)
-		for (ln=bus->devices.next; ln != &bus->devices; ln=ln->next) {
-			dev = pci_dev_b(ln);
-			if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
-				max = pci_scan_bridge(bus, dev, max, pass);
-		}
-
-	/*
-	 * We've scanned the bus and so we know all about what's on
-	 * the other side of any bridges that may be on this bus plus
-	 * any devices.
-	 *
-	 * Return how far we've got finding sub-buses.
-	 */
-	DBG("Bus scan for %02x returning with max=%02x\n", bus->number, max);
-	return max;
-}
-
-int __devinit pci_bus_exists(const struct list_head *list, int nr)
-{
-	const struct list_head *l;
-
-	for(l=list->next; l != list; l = l->next) {
-		const struct pci_bus *b = pci_bus_b(l);
-		if (b->number == nr || pci_bus_exists(&b->children, nr))
-			return 1;
-	}
-	return 0;
-}
-
-struct pci_bus * __devinit pci_alloc_primary_bus(int bus)
-{
-	struct pci_bus *b;
-
-	if (pci_bus_exists(&pci_root_buses, bus)) {
-		/* If we already got to this bus through a different bridge, ignore it */
-		DBG("PCI: Bus %02x already known\n", bus);
-		return NULL;
-	}
-
-	b = pci_alloc_bus();
-	if (!b)
-		return NULL;
-	list_add_tail(&b->node, &pci_root_buses);
-
-	b->dev = kmalloc(sizeof(*(b->dev)),GFP_KERNEL);
-	memset(b->dev,0,sizeof(*(b->dev)));
-	sprintf(b->dev->bus_id,"pci%d",bus);
-	strcpy(b->dev->name,"Host/PCI Bridge");
-	device_register(b->dev);
-
-	b->number = b->secondary = bus;
-	b->resource[0] = &ioport_resource;
-	b->resource[1] = &iomem_resource;
-	return b;
-}
-
-struct pci_bus * __devinit pci_scan_bus(int bus, struct pci_ops *ops, void *sysdata)
-{
-	struct pci_bus *b = pci_alloc_primary_bus(bus);
-	if (b) {
-		b->sysdata = sysdata;
-		b->ops = ops;
-		b->subordinate = pci_do_scan_bus(b);
-	}
-	return b;
-}
-
-#ifdef CONFIG_PM
-
-/*
- * PCI Power management..
- *
- * This needs to be done centralized, so that we power manage PCI
- * devices in the right order: we should not shut down PCI bridges
- * before we've shut down the devices behind them, and we should
- * not wake up devices before we've woken up the bridge to the
- * device.. Eh?
- *
- * We do not touch devices that don't have a driver that exports
- * a suspend/resume function. That is just too dangerous. If the default
- * PCI suspend/resume functions work for a device, the driver can
- * easily implement them (ie just have a suspend function that calls
- * the pci_set_power_state() function).
- */
-
-static int pci_pm_save_state_device(struct pci_dev *dev, u32 state)
-{
-	int error = 0;
-	if (dev) {
-		struct pci_driver *driver = dev->driver;
-		if (driver && driver->save_state) 
-			error = driver->save_state(dev,state);
-	}
-	return error;
-}
-
-static int pci_pm_suspend_device(struct pci_dev *dev, u32 state)
-{
-	int error = 0;
-	if (dev) {
-		struct pci_driver *driver = dev->driver;
-		if (driver && driver->suspend)
-			error = driver->suspend(dev,state);
-	}
-	return error;
-}
-
-static int pci_pm_resume_device(struct pci_dev *dev)
-{
-	int error = 0;
-	if (dev) {
-		struct pci_driver *driver = dev->driver;
-		if (driver && driver->resume)
-			error = driver->resume(dev);
-	}
-	return error;
-}
-
-static int pci_pm_save_state_bus(struct pci_bus *bus, u32 state)
-{
-	struct list_head *list;
-	int error = 0;
-
-	list_for_each(list, &bus->children) {
-		error = pci_pm_save_state_bus(pci_bus_b(list),state);
-		if (error) return error;
-	}
-	list_for_each(list, &bus->devices) {
-		error = pci_pm_save_state_device(pci_dev_b(list),state);
-		if (error) return error;
-	}
-	return 0;
-}
-
-static int pci_pm_suspend_bus(struct pci_bus *bus, u32 state)
-{
-	struct list_head *list;
-
-	/* Walk the bus children list */
-	list_for_each(list, &bus->children) 
-		pci_pm_suspend_bus(pci_bus_b(list),state);
-
-	/* Walk the device children list */
-	list_for_each(list, &bus->devices)
-		pci_pm_suspend_device(pci_dev_b(list),state);
-	return 0;
-}
-
-static int pci_pm_resume_bus(struct pci_bus *bus)
-{
-	struct list_head *list;
-
-	/* Walk the device children list */
-	list_for_each(list, &bus->devices)
-		pci_pm_resume_device(pci_dev_b(list));
-
-	/* And then walk the bus children */
-	list_for_each(list, &bus->children)
-		pci_pm_resume_bus(pci_bus_b(list));
-	return 0;
-}
-
-static int pci_pm_save_state(u32 state)
-{
-	struct list_head *list;
-	struct pci_bus *bus;
-	int error = 0;
-
-	list_for_each(list, &pci_root_buses) {
-		bus = pci_bus_b(list);
-		error = pci_pm_save_state_bus(bus,state);
-		if (!error)
-			error = pci_pm_save_state_device(bus->self,state);
-	}
-	return error;
-}
-
-static int pci_pm_suspend(u32 state)
-{
-	struct list_head *list;
-	struct pci_bus *bus;
-
-	list_for_each(list, &pci_root_buses) {
-		bus = pci_bus_b(list);
-		pci_pm_suspend_bus(bus,state);
-		pci_pm_suspend_device(bus->self,state);
-	}
-	return 0;
-}
-
-static int pci_pm_resume(void)
-{
-	struct list_head *list;
-	struct pci_bus *bus;
-
-	list_for_each(list, &pci_root_buses) {
-		bus = pci_bus_b(list);
-		pci_pm_resume_device(bus->self);
-		pci_pm_resume_bus(bus);
-	}
-	return 0;
-}
-
-static int 
-pci_pm_callback(struct pm_dev *pm_device, pm_request_t rqst, void *data)
-{
-	int error = 0;
-
-	switch (rqst) {
-	case PM_SAVE_STATE:
-		error = pci_pm_save_state((unsigned long)data);
-		break;
-	case PM_SUSPEND:
-		error = pci_pm_suspend((unsigned long)data);
-		break;
-	case PM_RESUME:
-		error = pci_pm_resume();
-		break;
-	default: break;
-	}
-	return error;
-}
-
-#endif
-
-/*
- * Pool allocator ... wraps the pci_alloc_consistent page allocator, so
- * small blocks are easily used by drivers for bus mastering controllers.
- * This should probably be sharing the guts of the slab allocator.
- */
-
-struct pci_pool {	/* the pool */
-	struct list_head	page_list;
-	spinlock_t		lock;
-	size_t			blocks_per_page;
-	size_t			size;
-	struct pci_dev		*dev;
-	size_t			allocation;
-	char			name [32];
-	wait_queue_head_t	waitq;
-};
-
-struct pci_page {	/* cacheable header for 'allocation' bytes */
-	struct list_head	page_list;
-	void			*vaddr;
-	dma_addr_t		dma;
-	unsigned long		bitmap [0];
-};
-
-#define	POOL_TIMEOUT_JIFFIES	((100 /* msec */ * HZ) / 1000)
-#define	POOL_POISON_BYTE	0xa7
-
-
-/**
- * pci_pool_create - Creates a pool of pci consistent memory blocks, for dma.
- * @name: name of pool, for diagnostics
- * @pdev: pci device that will be doing the DMA
- * @size: size of the blocks in this pool.
- * @align: alignment requirement for blocks; must be a power of two
- * @allocation: returned blocks won't cross this boundary (or zero)
- * @mem_flags: SLAB_* flags.
- *
- * Returns a pci allocation pool with the requested characteristics, or
- * null if one can't be created.  Given one of these pools, pci_pool_alloc()
- * may be used to allocate memory.  Such memory will all have "consistent"
- * DMA mappings, accessible by the device and its driver without using
- * cache flushing primitives.  The actual size of blocks allocated may be
- * larger than requested because of alignment.
- *
- * If allocation is nonzero, objects returned from pci_pool_alloc() won't
- * cross that size boundary.  This is useful for devices which have
- * addressing restrictions on individual DMA transfers, such as not crossing
- * boundaries of 4KBytes.
- */
-struct pci_pool *
-pci_pool_create (const char *name, struct pci_dev *pdev,
-	size_t size, size_t align, size_t allocation, int mem_flags)
-{
-	struct pci_pool		*retval;
-
-	if (align == 0)
-		align = 1;
-	if (size == 0)
-		return 0;
-	else if (size < align)
-		size = align;
-	else if ((size % align) != 0) {
-		size += align + 1;
-		size &= ~(align - 1);
-	}
-
-	if (allocation == 0) {
-		if (PAGE_SIZE < size)
-			allocation = size;
-		else
-			allocation = PAGE_SIZE;
-		// FIXME: round up for less fragmentation
-	} else if (allocation < size)
-		return 0;
-
-	if (!(retval = kmalloc (sizeof *retval, mem_flags)))
-		return retval;
-
-	strncpy (retval->name, name, sizeof retval->name);
-	retval->name [sizeof retval->name - 1] = 0;
-
-	retval->dev = pdev;
-	INIT_LIST_HEAD (&retval->page_list);
-	spin_lock_init (&retval->lock);
-	retval->size = size;
-	retval->allocation = allocation;
-	retval->blocks_per_page = allocation / size;
-	init_waitqueue_head (&retval->waitq);
-
-	return retval;
-}
-
-
-static struct pci_page *
-pool_alloc_page (struct pci_pool *pool, int mem_flags)
-{
-	struct pci_page	*page;
-	int		mapsize;
-
-	mapsize = pool->blocks_per_page;
-	mapsize = (mapsize + BITS_PER_LONG - 1) / BITS_PER_LONG;
-	mapsize *= sizeof (long);
-
-	page = (struct pci_page *) kmalloc (mapsize + sizeof *page, mem_flags);
-	if (!page)
-		return 0;
-	page->vaddr = pci_alloc_consistent (pool->dev,
-					    pool->allocation,
-					    &page->dma);
-	if (page->vaddr) {
-		memset (page->bitmap, 0xff, mapsize);	// bit set == free
-#ifdef	CONFIG_DEBUG_SLAB
-		memset (page->vaddr, POOL_POISON_BYTE, pool->allocation);
-#endif
-		list_add (&page->page_list, &pool->page_list);
-	} else {
-		kfree (page);
-		page = 0;
-	}
-	return page;
-}
-
-
-static inline int
-is_page_busy (int blocks, unsigned long *bitmap)
-{
-	while (blocks > 0) {
-		if (*bitmap++ != ~0UL)
-			return 1;
-		blocks -= BITS_PER_LONG;
-	}
-	return 0;
-}
-
-static void
-pool_free_page (struct pci_pool *pool, struct pci_page *page)
-{
-	dma_addr_t	dma = page->dma;
-
-#ifdef	CONFIG_DEBUG_SLAB
-	memset (page->vaddr, POOL_POISON_BYTE, pool->allocation);
-#endif
-	pci_free_consistent (pool->dev, pool->allocation, page->vaddr, dma);
-	list_del (&page->page_list);
-	kfree (page);
-}
-
-
-/**
- * pci_pool_destroy - destroys a pool of pci memory blocks.
- * @pool: pci pool that will be destroyed
- *
- * Caller guarantees that no more memory from the pool is in use,
- * and that nothing will try to use the pool after this call.
- */
-void
-pci_pool_destroy (struct pci_pool *pool)
-{
-	unsigned long		flags;
-
-	spin_lock_irqsave (&pool->lock, flags);
-	while (!list_empty (&pool->page_list)) {
-		struct pci_page		*page;
-		page = list_entry (pool->page_list.next,
-				struct pci_page, page_list);
-		if (is_page_busy (pool->blocks_per_page, page->bitmap)) {
-			printk (KERN_ERR "pci_pool_destroy %s/%s, %p busy\n",
-				pool->dev ? pool->dev->slot_name : NULL,
-				pool->name, page->vaddr);
-			/* leak the still-in-use consistent memory */
-			list_del (&page->page_list);
-			kfree (page);
-		} else
-			pool_free_page (pool, page);
-	}
-	spin_unlock_irqrestore (&pool->lock, flags);
-	kfree (pool);
-}
-
-
-/**
- * pci_pool_alloc - get a block of consistent memory
- * @pool: pci pool that will produce the block
- * @mem_flags: SLAB_KERNEL or SLAB_ATOMIC
- * @handle: pointer to dma address of block
- *
- * This returns the kernel virtual address of a currently unused block,
- * and reports its dma address through the handle.
- * If such a memory block can't be allocated, null is returned.
- */
-void *
-pci_pool_alloc (struct pci_pool *pool, int mem_flags, dma_addr_t *handle)
-{
-	unsigned long		flags;
-	struct list_head	*entry;
-	struct pci_page		*page;
-	int			map, block;
-	size_t			offset;
-	void			*retval;
-
-restart:
-	spin_lock_irqsave (&pool->lock, flags);
-	list_for_each (entry, &pool->page_list) {
-		int		i;
-		page = list_entry (entry, struct pci_page, page_list);
-		/* only cachable accesses here ... */
-		for (map = 0, i = 0;
-				i < pool->blocks_per_page;
-				i += BITS_PER_LONG, map++) {
-			if (page->bitmap [map] == 0)
-				continue;
-			block = ffz (~ page->bitmap [map]);
-			if ((i + block) < pool->blocks_per_page) {
-				clear_bit (block, &page->bitmap [map]);
-				offset = (BITS_PER_LONG * map) + block;
-				offset *= pool->size;
-				goto ready;
-			}
-		}
-	}
-	if (!(page = pool_alloc_page (pool, mem_flags))) {
-		if (mem_flags == SLAB_KERNEL) {
-			DECLARE_WAITQUEUE (wait, current);
-
-			current->state = TASK_INTERRUPTIBLE;
-			add_wait_queue (&pool->waitq, &wait);
-			spin_unlock_irqrestore (&pool->lock, flags);
-
-			schedule_timeout (POOL_TIMEOUT_JIFFIES);
-
-			current->state = TASK_RUNNING;
-			remove_wait_queue (&pool->waitq, &wait);
-			goto restart;
-		}
-		retval = 0;
-		goto done;
-	}
-
-	clear_bit (0, &page->bitmap [0]);
-	offset = 0;
-ready:
-	retval = offset + page->vaddr;
-	*handle = offset + page->dma;
-done:
-	spin_unlock_irqrestore (&pool->lock, flags);
-	return retval;
-}
-
-
-static struct pci_page *
-pool_find_page (struct pci_pool *pool, dma_addr_t dma)
-{
-	unsigned long		flags;
-	struct list_head	*entry;
-	struct pci_page		*page;
-
-	spin_lock_irqsave (&pool->lock, flags);
-	list_for_each (entry, &pool->page_list) {
-		page = list_entry (entry, struct pci_page, page_list);
-		if (dma < page->dma)
-			continue;
-		if (dma < (page->dma + pool->allocation))
-			goto done;
-	}
-	page = 0;
-done:
-	spin_unlock_irqrestore (&pool->lock, flags);
-	return page;
-}
-
-
-/**
- * pci_pool_free - put block back into pci pool
- * @pool: the pci pool holding the block
- * @vaddr: virtual address of block
- * @dma: dma address of block
- *
- * Caller promises neither device nor driver will again touch this block
- * unless it is first re-allocated.
- */
-void
-pci_pool_free (struct pci_pool *pool, void *vaddr, dma_addr_t dma)
-{
-	struct pci_page		*page;
-	unsigned long		flags;
-	int			map, block;
-
-	if ((page = pool_find_page (pool, dma)) == 0) {
-		printk (KERN_ERR "pci_pool_free %s/%s, %p/%lx (bad dma)\n",
-			pool->dev ? pool->dev->slot_name : NULL,
-			pool->name, vaddr, (unsigned long) dma);
-		return;
-	}
-
-	block = dma - page->dma;
-	block /= pool->size;
-	map = block / BITS_PER_LONG;
-	block %= BITS_PER_LONG;
-
-#ifdef	CONFIG_DEBUG_SLAB
-	if (((dma - page->dma) + (void *)page->vaddr) != vaddr) {
-		printk (KERN_ERR "pci_pool_free %s/%s, %p (bad vaddr)/%lx\n",
-			pool->dev ? pool->dev->slot_name : NULL,
-			pool->name, vaddr, (unsigned long) dma);
-		return;
-	}
-	if (page->bitmap [map] & (1UL << block)) {
-		printk (KERN_ERR "pci_pool_free %s/%s, dma %x already free\n",
-			pool->dev ? pool->dev->slot_name : NULL,
-			pool->name, dma);
-		return;
-	}
-	memset (vaddr, POOL_POISON_BYTE, pool->size);
-#endif
-
-	spin_lock_irqsave (&pool->lock, flags);
-	set_bit (block, &page->bitmap [map]);
-	if (waitqueue_active (&pool->waitq))
-		wake_up (&pool->waitq);
-	/*
-	 * Resist a temptation to do
-	 *    if (!is_page_busy(bpp, page->bitmap)) pool_free_page(pool, page);
-	 * it is not interrupt safe. Better have empty pages hang around.
-	 */
-	spin_unlock_irqrestore (&pool->lock, flags);
-}
-
-
 static int __devinit pci_init(void)
 {
 	struct pci_dev *dev;
 
-	pcibios_init();
-
 	pci_for_each_dev(dev) {
 		pci_fixup_device(PCI_FIXUP_FINAL, dev);
 	}
-
-#ifdef CONFIG_PM
-	pm_register(PM_PCI_DEV, 0, pci_pm_callback);
-#endif
 	return 0;
 }
 
@@ -2062,51 +582,19 @@ subsys_initcall(pci_init);
 
 __setup("pci=", pci_setup);
 
-EXPORT_SYMBOL(pci_read_config_byte);
-EXPORT_SYMBOL(pci_read_config_word);
-EXPORT_SYMBOL(pci_read_config_dword);
-EXPORT_SYMBOL(pci_write_config_byte);
-EXPORT_SYMBOL(pci_write_config_word);
-EXPORT_SYMBOL(pci_write_config_dword);
-EXPORT_SYMBOL(pci_devices);
-EXPORT_SYMBOL(pci_root_buses);
 EXPORT_SYMBOL(pci_enable_device);
 EXPORT_SYMBOL(pci_disable_device);
 EXPORT_SYMBOL(pci_find_capability);
 EXPORT_SYMBOL(pci_release_regions);
 EXPORT_SYMBOL(pci_request_regions);
-EXPORT_SYMBOL(pci_find_class);
-EXPORT_SYMBOL(pci_find_device);
-EXPORT_SYMBOL(pci_find_slot);
-EXPORT_SYMBOL(pci_find_subsys);
 EXPORT_SYMBOL(pci_set_master);
 EXPORT_SYMBOL(pci_set_mwi);
 EXPORT_SYMBOL(pci_clear_mwi);
 EXPORT_SYMBOL(pci_set_dma_mask);
 EXPORT_SYMBOL(pci_dac_set_dma_mask);
 EXPORT_SYMBOL(pci_assign_resource);
-EXPORT_SYMBOL(pci_register_driver);
-EXPORT_SYMBOL(pci_unregister_driver);
-EXPORT_SYMBOL(pci_dev_driver);
-EXPORT_SYMBOL(pci_match_device);
 EXPORT_SYMBOL(pci_find_parent_resource);
 
-#ifdef CONFIG_HOTPLUG
-EXPORT_SYMBOL(pci_setup_device);
-EXPORT_SYMBOL(pci_insert_device);
-EXPORT_SYMBOL(pci_remove_device);
-EXPORT_SYMBOL(pci_announce_device_to_drivers);
-EXPORT_SYMBOL(pci_add_new_bus);
-EXPORT_SYMBOL(pci_do_scan_bus);
-EXPORT_SYMBOL(pci_scan_slot);
-#ifdef CONFIG_PROC_FS
-EXPORT_SYMBOL(pci_proc_attach_device);
-EXPORT_SYMBOL(pci_proc_detach_device);
-EXPORT_SYMBOL(pci_proc_attach_bus);
-EXPORT_SYMBOL(pci_proc_detach_bus);
-#endif
-#endif
-
 EXPORT_SYMBOL(pci_set_power_state);
 EXPORT_SYMBOL(pci_save_state);
 EXPORT_SYMBOL(pci_restore_state);
@@ -2128,11 +616,3 @@ EXPORT_SYMBOL(pcibios_find_device);
 
 EXPORT_SYMBOL(isa_dma_bridge_buggy);
 EXPORT_SYMBOL(pci_pci_problems);
-
-/* Pool allocator */
-
-EXPORT_SYMBOL (pci_pool_create);
-EXPORT_SYMBOL (pci_pool_destroy);
-EXPORT_SYMBOL (pci_pool_alloc);
-EXPORT_SYMBOL (pci_pool_free);
-

drivers/pci/pool.c

+#include <linux/pci.h>
+#include <linux/module.h>
+
+/*
+ * Pool allocator ... wraps the pci_alloc_consistent page allocator, so
+ * small blocks are easily used by drivers for bus mastering controllers.
+ * This should probably be sharing the guts of the slab allocator.
+ */
+
+struct pci_pool {	/* the pool */
+	struct list_head	page_list;
+	spinlock_t		lock;
+	size_t			blocks_per_page;
+	size_t			size;
+	struct pci_dev		*dev;
+	size_t			allocation;
+	char			name [32];
+	wait_queue_head_t	waitq;
+};
+
+struct pci_page {	/* cacheable header for 'allocation' bytes */
+	struct list_head	page_list;
+	void			*vaddr;
+	dma_addr_t		dma;
+	unsigned long		bitmap [0];
+};
+
+#define	POOL_TIMEOUT_JIFFIES	((100 /* msec */ * HZ) / 1000)
+#define	POOL_POISON_BYTE	0xa7
+
+
+/**
+ * pci_pool_create - Creates a pool of pci consistent memory blocks, for dma.
+ * @name: name of pool, for diagnostics
+ * @pdev: pci device that will be doing the DMA
+ * @size: size of the blocks in this pool.
+ * @align: alignment requirement for blocks; must be a power of two
+ * @allocation: returned blocks won't cross this boundary (or zero)
+ * @mem_flags: SLAB_* flags.
+ *
+ * Returns a pci allocation pool with the requested characteristics, or
+ * null if one can't be created.  Given one of these pools, pci_pool_alloc()
+ * may be used to allocate memory.  Such memory will all have "consistent"
+ * DMA mappings, accessible by the device and its driver without using
+ * cache flushing primitives.  The actual size of blocks allocated may be
+ * larger than requested because of alignment.
+ *
+ * If allocation is nonzero, objects returned from pci_pool_alloc() won't
+ * cross that size boundary.  This is useful for devices which have
+ * addressing restrictions on individual DMA transfers, such as not crossing
+ * boundaries of 4KBytes.
+ */
+struct pci_pool *
+pci_pool_create (const char *name, struct pci_dev *pdev,
+	size_t size, size_t align, size_t allocation, int mem_flags)
+{
+	struct pci_pool		*retval;
+
+	if (align == 0)
+		align = 1;
+	if (size == 0)
+		return 0;
+	else if (size < align)
+		size = align;
+	else if ((size % align) != 0) {
+		size += align + 1;
+		size &= ~(align - 1);
+	}
+
+	if (allocation == 0) {
+		if (PAGE_SIZE < size)
+			allocation = size;
+		else
+			allocation = PAGE_SIZE;
+		// FIXME: round up for less fragmentation
+	} else if (allocation < size)
+		return 0;
+
+	if (!(retval = kmalloc (sizeof *retval, mem_flags)))
+		return retval;
+
+	strncpy (retval->name, name, sizeof retval->name);
+	retval->name [sizeof retval->name - 1] = 0;
+
+	retval->dev = pdev;
+	INIT_LIST_HEAD (&retval->page_list);
+	spin_lock_init (&retval->lock);
+	retval->size = size;
+	retval->allocation = allocation;
+	retval->blocks_per_page = allocation / size;
+	init_waitqueue_head (&retval->waitq);
+
+	return retval;
+}
+
+
+static struct pci_page *
+pool_alloc_page (struct pci_pool *pool, int mem_flags)
+{
+	struct pci_page	*page;
+	int		mapsize;
+
+	mapsize = pool->blocks_per_page;
+	mapsize = (mapsize + BITS_PER_LONG - 1) / BITS_PER_LONG;
+	mapsize *= sizeof (long);
+
+	page = (struct pci_page *) kmalloc (mapsize + sizeof *page, mem_flags);
+	if (!page)
+		return 0;
+	page->vaddr = pci_alloc_consistent (pool->dev,
+					    pool->allocation,
+					    &page->dma);
+	if (page->vaddr) {
+		memset (page->bitmap, 0xff, mapsize);	// bit set == free
+#ifdef	CONFIG_DEBUG_SLAB
+		memset (page->vaddr, POOL_POISON_BYTE, pool->allocation);
+#endif
+		list_add (&page->page_list, &pool->page_list);
+	} else {
+		kfree (page);
+		page = 0;
+	}
+	return page;
+}
+
+
+static inline int
+is_page_busy (int blocks, unsigned long *bitmap)
+{
+	while (blocks > 0) {
+		if (*bitmap++ != ~0UL)
+			return 1;
+		blocks -= BITS_PER_LONG;
+	}
+	return 0;
+}
+
+static void
+pool_free_page (struct pci_pool *pool, struct pci_page *page)
+{
+	dma_addr_t	dma = page->dma;
+
+#ifdef	CONFIG_DEBUG_SLAB
+	memset (page->vaddr, POOL_POISON_BYTE, pool->allocation);
+#endif
+	pci_free_consistent (pool->dev, pool->allocation, page->vaddr, dma);
+	list_del (&page->page_list);
+	kfree (page);
+}
+
+
+/**
+ * pci_pool_destroy - destroys a pool of pci memory blocks.
+ * @pool: pci pool that will be destroyed
+ *
+ * Caller guarantees that no more memory from the pool is in use,
+ * and that nothing will try to use the pool after this call.
+ */
+void
+pci_pool_destroy (struct pci_pool *pool)
+{
+	unsigned long		flags;
+
+	spin_lock_irqsave (&pool->lock, flags);
+	while (!list_empty (&pool->page_list)) {
+		struct pci_page		*page;
+		page = list_entry (pool->page_list.next,
+				struct pci_page, page_list);
+		if (is_page_busy (pool->blocks_per_page, page->bitmap)) {
+			printk (KERN_ERR "pci_pool_destroy %s/%s, %p busy\n",
+				pool->dev ? pool->dev->slot_name : NULL,
+				pool->name, page->vaddr);
+			/* leak the still-in-use consistent memory */
+			list_del (&page->page_list);
+			kfree (page);
+		} else
+			pool_free_page (pool, page);
+	}
+	spin_unlock_irqrestore (&pool->lock, flags);
+	kfree (pool);
+}
+
+
+/**
+ * pci_pool_alloc - get a block of consistent memory
+ * @pool: pci pool that will produce the block
+ * @mem_flags: SLAB_KERNEL or SLAB_ATOMIC
+ * @handle: pointer to dma address of block
+ *
+ * This returns the kernel virtual address of a currently unused block,
+ * and reports its dma address through the handle.
+ * If such a memory block can't be allocated, null is returned.
+ */
+void *
+pci_pool_alloc (struct pci_pool *pool, int mem_flags, dma_addr_t *handle)
+{
+	unsigned long		flags;
+	struct list_head	*entry;
+	struct pci_page		*page;
+	int			map, block;
+	size_t			offset;
+	void			*retval;
+
+restart:
+	spin_lock_irqsave (&pool->lock, flags);
+	list_for_each (entry, &pool->page_list) {
+		int		i;
+		page = list_entry (entry, struct pci_page, page_list);
+		/* only cachable accesses here ... */
+		for (map = 0, i = 0;
+				i < pool->blocks_per_page;
+				i += BITS_PER_LONG, map++) {
+			if (page->bitmap [map] == 0)
+				continue;
+			block = ffz (~ page->bitmap [map]);
+			if ((i + block) < pool->blocks_per_page) {
+				clear_bit (block, &page->bitmap [map]);
+				offset = (BITS_PER_LONG * map) + block;
+				offset *= pool->size;
+				goto ready;
+			}
+		}
+	}
+	if (!(page = pool_alloc_page (pool, mem_flags))) {
+		if (mem_flags == SLAB_KERNEL) {
+			DECLARE_WAITQUEUE (wait, current);
+
+			current->state = TASK_INTERRUPTIBLE;
+			add_wait_queue (&pool->waitq, &wait);
+			spin_unlock_irqrestore (&pool->lock, flags);
+
+			schedule_timeout (POOL_TIMEOUT_JIFFIES);
+
+			current->state = TASK_RUNNING;
+			remove_wait_queue (&pool->waitq, &wait);
+			goto restart;
+		}
+		retval = 0;
+		goto done;
+	}
+
+	clear_bit (0, &page->bitmap [0]);
+	offset = 0;
+ready:
+	retval = offset + page->vaddr;
+	*handle = offset + page->dma;
+done:
+	spin_unlock_irqrestore (&pool->lock, flags);
+	return retval;
+}
+
+
+static struct pci_page *
+pool_find_page (struct pci_pool *pool, dma_addr_t dma)
+{
+	unsigned long		flags;
+	struct list_head	*entry;
+	struct pci_page		*page;
+
+	spin_lock_irqsave (&pool->lock, flags);
+	list_for_each (entry, &pool->page_list) {
+		page = list_entry (entry, struct pci_page, page_list);
+		if (dma < page->dma)
+			continue;
+		if (dma < (page->dma + pool->allocation))
+			goto done;
+	}
+	page = 0;
+done:
+	spin_unlock_irqrestore (&pool->lock, flags);
+	return page;
+}
+
+
+/**
+ * pci_pool_free - put block back into pci pool
+ * @pool: the pci pool holding the block
+ * @vaddr: virtual address of block
+ * @dma: dma address of block
+ *
+ * Caller promises neither device nor driver will again touch this block
+ * unless it is first re-allocated.
+ */
+void
+pci_pool_free (struct pci_pool *pool, void *vaddr, dma_addr_t dma)
+{
+	struct pci_page		*page;
+	unsigned long		flags;
+	int			map, block;
+
+	if ((page = pool_find_page (pool, dma)) == 0) {
+		printk (KERN_ERR "pci_pool_free %s/%s, %p/%lx (bad dma)\n",
+			pool->dev ? pool->dev->slot_name : NULL,
+			pool->name, vaddr, (unsigned long) dma);
+		return;
+	}
+
+	block = dma - page->dma;
+	block /= pool->size;
+	map = block / BITS_PER_LONG;
+	block %= BITS_PER_LONG;
+
+#ifdef	CONFIG_DEBUG_SLAB
+	if (((dma - page->dma) + (void *)page->vaddr) != vaddr) {
+		printk (KERN_ERR "pci_pool_free %s/%s, %p (bad vaddr)/%lx\n",
+			pool->dev ? pool->dev->slot_name : NULL,
+			pool->name, vaddr, (unsigned long) dma);
+		return;
+	}
+	if (page->bitmap [map] & (1UL << block)) {
+		printk (KERN_ERR "pci_pool_free %s/%s, dma %x already free\n",
+			pool->dev ? pool->dev->slot_name : NULL,
+			pool->name, dma);
+		return;
+	}
+	memset (vaddr, POOL_POISON_BYTE, pool->size);
+#endif
+
+	spin_lock_irqsave (&pool->lock, flags);
+	set_bit (block, &page->bitmap [map]);
+	if (waitqueue_active (&pool->waitq))
+		wake_up (&pool->waitq);
+	/*
+	 * Resist a temptation to do
+	 *    if (!is_page_busy(bpp, page->bitmap)) pool_free_page(pool, page);
+	 * it is not interrupt safe. Better have empty pages hang around.
+	 */
+	spin_unlock_irqrestore (&pool->lock, flags);
+}
+
+
+EXPORT_SYMBOL (pci_pool_create);
+EXPORT_SYMBOL (pci_pool_destroy);
+EXPORT_SYMBOL (pci_pool_alloc);
+EXPORT_SYMBOL (pci_pool_free);

drivers/pci/power.c

+#include <linux/pci.h>
+#include <linux/pm.h>
+
+/*
+ * PCI Power management..
+ *
+ * This needs to be done centralized, so that we power manage PCI
+ * devices in the right order: we should not shut down PCI bridges
+ * before we've shut down the devices behind them, and we should
+ * not wake up devices before we've woken up the bridge to the
+ * device.. Eh?
+ *
+ * We do not touch devices that don't have a driver that exports
+ * a suspend/resume function. That is just too dangerous. If the default
+ * PCI suspend/resume functions work for a device, the driver can
+ * easily implement them (ie just have a suspend function that calls
+ * the pci_set_power_state() function).
+ */
+
+static int pci_pm_save_state_device(struct pci_dev *dev, u32 state)
+{
+	int error = 0;
+	if (dev) {
+		struct pci_driver *driver = dev->driver;
+		if (driver && driver->save_state) 
+			error = driver->save_state(dev,state);
+	}
+	return error;
+}
+
+static int pci_pm_suspend_device(struct pci_dev *dev, u32 state)
+{
+	int error = 0;
+	if (dev) {
+		struct pci_driver *driver = dev->driver;
+		if (driver && driver->suspend)
+			error = driver->suspend(dev,state);
+	}
+	return error;
+}
+
+static int pci_pm_resume_device(struct pci_dev *dev)
+{
+	int error = 0;
+	if (dev) {
+		struct pci_driver *driver = dev->driver;
+		if (driver && driver->resume)
+			error = driver->resume(dev);
+	}
+	return error;
+}
+
+static int pci_pm_save_state_bus(struct pci_bus *bus, u32 state)
+{
+	struct list_head *list;
+	int error = 0;
+
+	list_for_each(list, &bus->children) {
+		error = pci_pm_save_state_bus(pci_bus_b(list),state);
+		if (error) return error;
+	}
+	list_for_each(list, &bus->devices) {
+		error = pci_pm_save_state_device(pci_dev_b(list),state);
+		if (error) return error;
+	}
+	return 0;
+}
+
+static int pci_pm_suspend_bus(struct pci_bus *bus, u32 state)
+{
+	struct list_head *list;
+
+	/* Walk the bus children list */
+	list_for_each(list, &bus->children) 
+		pci_pm_suspend_bus(pci_bus_b(list),state);
+
+	/* Walk the device children list */
+	list_for_each(list, &bus->devices)
+		pci_pm_suspend_device(pci_dev_b(list),state);
+	return 0;
+}
+
+static int pci_pm_resume_bus(struct pci_bus *bus)
+{
+	struct list_head *list;
+
+	/* Walk the device children list */
+	list_for_each(list, &bus->devices)
+		pci_pm_resume_device(pci_dev_b(list));
+
+	/* And then walk the bus children */
+	list_for_each(list, &bus->children)
+		pci_pm_resume_bus(pci_bus_b(list));
+	return 0;
+}
+
+static int pci_pm_save_state(u32 state)
+{
+	struct list_head *list;
+	struct pci_bus *bus;
+	int error = 0;
+
+	list_for_each(list, &pci_root_buses) {
+		bus = pci_bus_b(list);
+		error = pci_pm_save_state_bus(bus,state);
+		if (!error)
+			error = pci_pm_save_state_device(bus->self,state);
+	}
+	return error;
+}
+
+static int pci_pm_suspend(u32 state)
+{
+	struct list_head *list;
+	struct pci_bus *bus;
+
+	list_for_each(list, &pci_root_buses) {
+		bus = pci_bus_b(list);
+		pci_pm_suspend_bus(bus,state);
+		pci_pm_suspend_device(bus->self,state);
+	}
+	return 0;
+}
+
+static int pci_pm_resume(void)
+{
+	struct list_head *list;
+	struct pci_bus *bus;
+
+	list_for_each(list, &pci_root_buses) {
+		bus = pci_bus_b(list);
+		pci_pm_resume_device(bus->self);
+		pci_pm_resume_bus(bus);
+	}
+	return 0;
+}
+
+static int 
+pci_pm_callback(struct pm_dev *pm_device, pm_request_t rqst, void *data)
+{
+	int error = 0;
+
+	switch (rqst) {
+	case PM_SAVE_STATE:
+		error = pci_pm_save_state((unsigned long)data);
+		break;
+	case PM_SUSPEND:
+		error = pci_pm_suspend((unsigned long)data);
+		break;
+	case PM_RESUME:
+		error = pci_pm_resume();
+		break;
+	default: break;
+	}
+	return error;
+}
+
+static int __init pci_pm_init(void)
+{
+	pm_register(PM_PCI_DEV, 0, pci_pm_callback);
+	return 0;
+}
+
+subsys_initcall(pci_pm_init);

drivers/pci/probe.c

+/*
+ * probe.c - PCI detection and setup code
+ */
+
+#include <linux/pci.h>
+#include <linux/module.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+LIST_HEAD(pci_root_buses);
+LIST_HEAD(pci_devices);
+
+extern struct device_driver pci_device_driver;
+
+/*
+ * Translate the low bits of the PCI base
+ * to the resource type
+ */
+static inline unsigned int pci_calc_resource_flags(unsigned int flags)
+{
+	if (flags & PCI_BASE_ADDRESS_SPACE_IO)
+		return IORESOURCE_IO;
+
+	if (flags & PCI_BASE_ADDRESS_MEM_PREFETCH)
+		return IORESOURCE_MEM | IORESOURCE_PREFETCH;
+
+	return IORESOURCE_MEM;
+}
+
+/*
+ * Find the extent of a PCI decode..
+ */
+static u32 pci_size(u32 base, unsigned long mask)
+{
+	u32 size = mask & base;		/* Find the significant bits */
+	size = size & ~(size-1);	/* Get the lowest of them to find the decode size */
+	return size-1;			/* extent = size - 1 */
+}
+
+static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
+{
+	unsigned int pos, reg, next;
+	u32 l, sz;
+	struct resource *res;
+
+	for(pos=0; pos<howmany; pos = next) {
+		next = pos+1;
+		res = &dev->resource[pos];
+		res->name = dev->name;
+		reg = PCI_BASE_ADDRESS_0 + (pos << 2);
+		pci_read_config_dword(dev, reg, &l);
+		pci_write_config_dword(dev, reg, ~0);
+		pci_read_config_dword(dev, reg, &sz);
+		pci_write_config_dword(dev, reg, l);
+		if (!sz || sz == 0xffffffff)
+			continue;
+		if (l == 0xffffffff)
+			l = 0;
+		if ((l & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_MEMORY) {
+			res->start = l & PCI_BASE_ADDRESS_MEM_MASK;
+			res->flags |= l & ~PCI_BASE_ADDRESS_MEM_MASK;
+			sz = pci_size(sz, PCI_BASE_ADDRESS_MEM_MASK);
+		} else {
+			res->start = l & PCI_BASE_ADDRESS_IO_MASK;
+			res->flags |= l & ~PCI_BASE_ADDRESS_IO_MASK;
+			sz = pci_size(sz, PCI_BASE_ADDRESS_IO_MASK & 0xffff);
+		}
+		res->end = res->start + (unsigned long) sz;
+		res->flags |= pci_calc_resource_flags(l);
+		if ((l & (PCI_BASE_ADDRESS_SPACE | PCI_BASE_ADDRESS_MEM_TYPE_MASK))
+		    == (PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64)) {
+			pci_read_config_dword(dev, reg+4, &l);
+			next++;
+#if BITS_PER_LONG == 64
+			res->start |= ((unsigned long) l) << 32;
+			res->end = res->start + sz;
+			pci_write_config_dword(dev, reg+4, ~0);
+			pci_read_config_dword(dev, reg+4, &sz);
+			pci_write_config_dword(dev, reg+4, l);
+			if (~sz)
+				res->end = res->start + 0xffffffff +
+						(((unsigned long) ~sz) << 32);
+#else
+			if (l) {
+				printk(KERN_ERR "PCI: Unable to handle 64-bit address for device %s\n", dev->slot_name);
+				res->start = 0;
+				res->flags = 0;
+				continue;
+			}
+#endif
+		}
+	}
+	if (rom) {
+		dev->rom_base_reg = rom;
+		res = &dev->resource[PCI_ROM_RESOURCE];
+		pci_read_config_dword(dev, rom, &l);
+		pci_write_config_dword(dev, rom, ~PCI_ROM_ADDRESS_ENABLE);
+		pci_read_config_dword(dev, rom, &sz);
+		pci_write_config_dword(dev, rom, l);
+		if (l == 0xffffffff)
+			l = 0;
+		if (sz && sz != 0xffffffff) {
+			res->flags = (l & PCI_ROM_ADDRESS_ENABLE) |
+			  IORESOURCE_MEM | IORESOURCE_PREFETCH | IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
+			res->start = l & PCI_ROM_ADDRESS_MASK;
+			sz = pci_size(sz, PCI_ROM_ADDRESS_MASK);
+			res->end = res->start + (unsigned long) sz;
+		}
+		res->name = dev->name;
+	}
+}
+
+void __devinit pci_read_bridge_bases(struct pci_bus *child)
+{
+	struct pci_dev *dev = child->self;
+	u8 io_base_lo, io_limit_lo;
+	u16 mem_base_lo, mem_limit_lo;
+	unsigned long base, limit;
+	struct resource *res;
+	int i;
+
+	if (!dev)		/* It's a host bus, nothing to read */
+		return;
+
+	for(i=0; i<3; i++)
+		child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i];
+
+	res = child->resource[0];
+	pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
+	pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo);
+	base = (io_base_lo & PCI_IO_RANGE_MASK) << 8;
+	limit = (io_limit_lo & PCI_IO_RANGE_MASK) << 8;
+
+	if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
+		u16 io_base_hi, io_limit_hi;
+		pci_read_config_word(dev, PCI_IO_BASE_UPPER16, &io_base_hi);
+		pci_read_config_word(dev, PCI_IO_LIMIT_UPPER16, &io_limit_hi);
+		base |= (io_base_hi << 16);
+		limit |= (io_limit_hi << 16);
+	}
+
+	if (base && base <= limit) {
+		res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO;
+		res->start = base;
+		res->end = limit + 0xfff;
+		res->name = child->name;
+	} else {
+		/*
+		 * Ugh. We don't know enough about this bridge. Just assume
+		 * that it's entirely transparent.
+		 */
+		printk(KERN_ERR "Unknown bridge resource %d: assuming transparent\n", 0);
+		child->resource[0] = child->parent->resource[0];
+	}
+
+	res = child->resource[1];
+	pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo);
+	pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo);
+	base = (mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16;
+	limit = (mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16;
+	if (base && base <= limit) {
+		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
+		res->start = base;
+		res->end = limit + 0xfffff;
+		res->name = child->name;
+	} else {
+		/* See comment above. Same thing */
+		printk(KERN_ERR "Unknown bridge resource %d: assuming transparent\n", 1);
+		child->resource[1] = child->parent->resource[1];
+	}
+
+	res = child->resource[2];
+	pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
+	pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo);
+	base = (mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
+	limit = (mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;
+
+	if ((mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
+		u32 mem_base_hi, mem_limit_hi;
+		pci_read_config_dword(dev, PCI_PREF_BASE_UPPER32, &mem_base_hi);
+		pci_read_config_dword(dev, PCI_PREF_LIMIT_UPPER32, &mem_limit_hi);
+#if BITS_PER_LONG == 64
+		base |= ((long) mem_base_hi) << 32;
+		limit |= ((long) mem_limit_hi) << 32;
+#else
+		if (mem_base_hi || mem_limit_hi) {
+			printk(KERN_ERR "PCI: Unable to handle 64-bit address space for %s\n", child->name);
+			return;
+		}
+#endif
+	}
+	if (base && base <= limit) {
+		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH;
+		res->start = base;
+		res->end = limit + 0xfffff;
+		res->name = child->name;
+	} else {
+		/* See comments above */
+		printk(KERN_ERR "Unknown bridge resource %d: assuming transparent\n", 2);
+		child->resource[2] = child->parent->resource[2];
+	}
+}
+
+static struct pci_bus * __devinit pci_alloc_bus(void)
+{
+	struct pci_bus *b;
+
+	b = kmalloc(sizeof(*b), GFP_KERNEL);
+	if (b) {
+		memset(b, 0, sizeof(*b));
+		INIT_LIST_HEAD(&b->children);
+		INIT_LIST_HEAD(&b->devices);
+	}
+	return b;
+}
+
+struct pci_bus * __devinit pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, int busnr)
+{
+	struct pci_bus *child;
+	int i;
+
+	/*
+	 * Allocate a new bus, and inherit stuff from the parent..
+	 */
+	child = pci_alloc_bus();
+
+	list_add_tail(&child->node, &parent->children);
+	child->self = dev;
+	dev->subordinate = child;
+	child->parent = parent;
+	child->ops = parent->ops;
+	child->sysdata = parent->sysdata;
+	child->dev = &dev->dev;
+
+	/*
+	 * Set up the primary, secondary and subordinate
+	 * bus numbers.
+	 */
+	child->number = child->secondary = busnr;
+	child->primary = parent->secondary;
+	child->subordinate = 0xff;
+
+	/* Set up default resource pointers.. */
+	for (i = 0; i < 4; i++)
+		child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i];
+
+	return child;
+}
+
+unsigned int __devinit pci_do_scan_bus(struct pci_bus *bus);
+
+/*
+ * If it's a bridge, configure it and scan the bus behind it.
+ * For CardBus bridges, we don't scan behind as the devices will
+ * be handled by the bridge driver itself.
+ *
+ * We need to process bridges in two passes -- first we scan those
+ * already configured by the BIOS and after we are done with all of
+ * them, we proceed to assigning numbers to the remaining buses in
+ * order to avoid overlaps between old and new bus numbers.
+ */
+static int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max, int pass)
+{
+	unsigned int buses;
+	unsigned short cr;
+	struct pci_bus *child;
+	int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
+
+	pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
+	DBG("Scanning behind PCI bridge %s, config %06x, pass %d\n", dev->slot_name, buses & 0xffffff, pass);
+	if ((buses & 0xffff00) && !pcibios_assign_all_busses()) {
+		/*
+		 * Bus already configured by firmware, process it in the first
+		 * pass and just note the configuration.
+		 */
+		if (pass)
+			return max;
+		child = pci_add_new_bus(bus, dev, 0);
+		child->primary = buses & 0xFF;
+		child->secondary = (buses >> 8) & 0xFF;
+		child->subordinate = (buses >> 16) & 0xFF;
+		child->number = child->secondary;
+		if (!is_cardbus) {
+			unsigned int cmax = pci_do_scan_bus(child);
+			if (cmax > max) max = cmax;
+		} else {
+			unsigned int cmax = child->subordinate;
+			if (cmax > max) max = cmax;
+		}
+	} else {
+		/*
+		 * We need to assign a number to this bus which we always
+		 * do in the second pass. We also keep all address decoders
+		 * on the bridge disabled during scanning.  FIXME: Why?
+		 */
+		if (!pass)
+			return max;
+		pci_read_config_word(dev, PCI_COMMAND, &cr);
+		pci_write_config_word(dev, PCI_COMMAND, 0x0000);
+		pci_write_config_word(dev, PCI_STATUS, 0xffff);
+
+		child = pci_add_new_bus(bus, dev, ++max);
+		buses = (buses & 0xff000000)
+		      | ((unsigned int)(child->primary)     <<  0)
+		      | ((unsigned int)(child->secondary)   <<  8)
+		      | ((unsigned int)(child->subordinate) << 16);
+		/*
+		 * We need to blast all three values with a single write.
+		 */
+		pci_write_config_dword(dev, PCI_PRIMARY_BUS, buses);
+		if (!is_cardbus) {
+			/* Now we can scan all subordinate buses... */
+			max = pci_do_scan_bus(child);
+		} else {
+			/*
+			 * For CardBus bridges, we leave 4 bus numbers
+			 * as cards with a PCI-to-PCI bridge can be
+			 * inserted later.
+			 */
+			max += 3;
+		}
+		/*
+		 * Set the subordinate bus number to its real value.
+		 */
+		child->subordinate = max;
+		pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max);
+		pci_write_config_word(dev, PCI_COMMAND, cr);
+	}
+	sprintf(child->name, (is_cardbus ? "PCI CardBus #%02x" : "PCI Bus #%02x"), child->number);
+
+	return max;
+}
+
+/*
+ * Read interrupt line and base address registers.
+ * The architecture-dependent code can tweak these, of course.
+ */
+static void pci_read_irq(struct pci_dev *dev)
+{
+	unsigned char irq;
+
+	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq);
+	if (irq)
+		pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
+	dev->irq = irq;
+}
+
+/**
+ * pci_setup_device - fill in class and map information of a device
+ * @dev: the device structure to fill
+ *
+ * Initialize the device structure with information about the device's 
+ * vendor,class,memory and IO-space addresses,IRQ lines etc.
+ * Called at initialisation of the PCI subsystem and by CardBus services.
+ * Returns 0 on success and -1 if unknown type of device (not normal, bridge
+ * or CardBus).
+ */
+int pci_setup_device(struct pci_dev * dev)
+{
+	u32 class;
+
+	sprintf(dev->slot_name, "%02x:%02x.%d", dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+	sprintf(dev->name, "PCI device %04x:%04x", dev->vendor, dev->device);
+	
+	pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
+	class >>= 8;				    /* upper 3 bytes */
+	dev->class = class;
+	class >>= 8;
+
+	DBG("Found %02x:%02x [%04x/%04x] %06x %02x\n", dev->bus->number, dev->devfn, dev->vendor, dev->device, class, dev->hdr_type);
+
+	/* "Unknown power state" */
+	dev->current_state = 4;
+
+	switch (dev->hdr_type) {		    /* header type */
+	case PCI_HEADER_TYPE_NORMAL:		    /* standard header */
+		if (class == PCI_CLASS_BRIDGE_PCI)
+			goto bad;
+		pci_read_irq(dev);
+		pci_read_bases(dev, 6, PCI_ROM_ADDRESS);
+		pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
+		pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &dev->subsystem_device);
+		break;
+
+	case PCI_HEADER_TYPE_BRIDGE:		    /* bridge header */
+		if (class != PCI_CLASS_BRIDGE_PCI)
+			goto bad;
+		pci_read_bases(dev, 2, PCI_ROM_ADDRESS1);
+		break;
+
+	case PCI_HEADER_TYPE_CARDBUS:		    /* CardBus bridge header */
+		if (class != PCI_CLASS_BRIDGE_CARDBUS)
+			goto bad;
+		pci_read_irq(dev);
+		pci_read_bases(dev, 1, 0);
+		pci_read_config_word(dev, PCI_CB_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
+		pci_read_config_word(dev, PCI_CB_SUBSYSTEM_ID, &dev->subsystem_device);
+		break;
+
+	default:				    /* unknown header */
+		printk(KERN_ERR "PCI: device %s has unknown header type %02x, ignoring.\n",
+			dev->slot_name, dev->hdr_type);
+		return -1;
+
+	bad:
+		printk(KERN_ERR "PCI: %s: class %x doesn't match header type %02x. Ignoring class.\n",
+		       dev->slot_name, class, dev->hdr_type);
+		dev->class = PCI_CLASS_NOT_DEFINED;
+	}
+
+	/* We found a fine healthy device, go go go... */
+	return 0;
+}
+
+/*
+ * Read the config data for a PCI device, sanity-check it
+ * and fill in the dev structure...
+ */
+struct pci_dev * __devinit pci_scan_device(struct pci_dev *temp)
+{
+	struct pci_dev *dev;
+	u32 l;
+
+	if (pci_read_config_dword(temp, PCI_VENDOR_ID, &l))
+		return NULL;
+
+	/* some broken boards return 0 or ~0 if a slot is empty: */
+	if (l == 0xffffffff || l == 0x00000000 || l == 0x0000ffff || l == 0xffff0000)
+		return NULL;
+
+	dev = kmalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return NULL;
+
+	memcpy(dev, temp, sizeof(*dev));
+	dev->vendor = l & 0xffff;
+	dev->device = (l >> 16) & 0xffff;
+
+	/* Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer)
+	   set this higher, assuming the system even supports it.  */
+	dev->dma_mask = 0xffffffff;
+	if (pci_setup_device(dev) < 0) {
+		kfree(dev);
+		return NULL;
+	}
+
+	/* now put in global tree */
+	strcpy(dev->dev.name,dev->name);
+	strcpy(dev->dev.bus_id,dev->slot_name);
+
+	device_register(&dev->dev);
+	return dev;
+}
+
+struct pci_dev * __devinit pci_scan_slot(struct pci_dev *temp)
+{
+	struct pci_bus *bus = temp->bus;
+	struct pci_dev *dev;
+	struct pci_dev *first_dev = NULL;
+	int func = 0;
+	int is_multi = 0;
+	u8 hdr_type;
+
+	for (func = 0; func < 8; func++, temp->devfn++) {
+		if (func && !is_multi)		/* not a multi-function device */
+			continue;
+		if (pci_read_config_byte(temp, PCI_HEADER_TYPE, &hdr_type))
+			continue;
+		temp->hdr_type = hdr_type & 0x7f;
+
+		dev = pci_scan_device(temp);
+		if (!dev)
+			continue;
+		pci_name_device(dev);
+		if (!func) {
+			is_multi = hdr_type & 0x80;
+			first_dev = dev;
+		}
+
+		/*
+		 * Link the device to both the global PCI device chain and
+		 * the per-bus list of devices.
+		 */
+		list_add_tail(&dev->global_list, &pci_devices);
+		list_add_tail(&dev->bus_list, &bus->devices);
+
+		/* Fix up broken headers */
+		pci_fixup_device(PCI_FIXUP_HEADER, dev);
+	}
+	return first_dev;
+}
+
+unsigned int __devinit pci_do_scan_bus(struct pci_bus *bus)
+{
+	unsigned int devfn, max, pass;
+	struct list_head *ln;
+	struct pci_dev *dev, dev0;
+
+	DBG("Scanning bus %02x\n", bus->number);
+	max = bus->secondary;
+
+	/* Create a device template */
+	memset(&dev0, 0, sizeof(dev0));
+	dev0.bus = bus;
+	dev0.sysdata = bus->sysdata;
+	dev0.dev.parent = bus->dev;
+	dev0.dev.driver = &pci_device_driver;
+
+	/* Go find them, Rover! */
+	for (devfn = 0; devfn < 0x100; devfn += 8) {
+		dev0.devfn = devfn;
+		pci_scan_slot(&dev0);
+	}
+
+	/*
+	 * After performing arch-dependent fixup of the bus, look behind
+	 * all PCI-to-PCI bridges on this bus.
+	 */
+	DBG("Fixups for bus %02x\n", bus->number);
+	pcibios_fixup_bus(bus);
+	for (pass=0; pass < 2; pass++)
+		for (ln=bus->devices.next; ln != &bus->devices; ln=ln->next) {
+			dev = pci_dev_b(ln);
+			if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
+				max = pci_scan_bridge(bus, dev, max, pass);
+		}
+
+	/*
+	 * We've scanned the bus and so we know all about what's on
+	 * the other side of any bridges that may be on this bus plus
+	 * any devices.
+	 *
+	 * Return how far we've got finding sub-buses.
+	 */
+	DBG("Bus scan for %02x returning with max=%02x\n", bus->number, max);
+	return max;
+}
+
+int __devinit pci_bus_exists(const struct list_head *list, int nr)
+{
+	const struct list_head *l;
+
+	for(l=list->next; l != list; l = l->next) {
+		const struct pci_bus *b = pci_bus_b(l);
+		if (b->number == nr || pci_bus_exists(&b->children, nr))
+			return 1;
+	}
+	return 0;
+}
+
+struct pci_bus * __devinit pci_alloc_primary_bus(int bus)
+{
+	struct pci_bus *b;
+
+	if (pci_bus_exists(&pci_root_buses, bus)) {
+		/* If we already got to this bus through a different bridge, ignore it */
+		DBG("PCI: Bus %02x already known\n", bus);
+		return NULL;
+	}
+
+	b = pci_alloc_bus();
+	if (!b)
+		return NULL;
+	list_add_tail(&b->node, &pci_root_buses);
+
+	b->dev = kmalloc(sizeof(*(b->dev)),GFP_KERNEL);
+	memset(b->dev,0,sizeof(*(b->dev)));
+	sprintf(b->dev->bus_id,"pci%d",bus);
+	strcpy(b->dev->name,"Host/PCI Bridge");
+	device_register(b->dev);
+
+	b->number = b->secondary = bus;
+	b->resource[0] = &ioport_resource;
+	b->resource[1] = &iomem_resource;
+	return b;
+}
+
+struct pci_bus * __devinit pci_scan_bus(int bus, struct pci_ops *ops, void *sysdata)
+{
+	struct pci_bus *b = pci_alloc_primary_bus(bus);
+	if (b) {
+		b->sysdata = sysdata;
+		b->ops = ops;
+		b->subordinate = pci_do_scan_bus(b);
+	}
+	return b;
+}
+
+EXPORT_SYMBOL(pci_devices);
+EXPORT_SYMBOL(pci_root_buses);
+
+#ifdef CONFIG_HOTPLUG
+EXPORT_SYMBOL(pci_setup_device);
+EXPORT_SYMBOL(pci_add_new_bus);
+EXPORT_SYMBOL(pci_do_scan_bus);
+EXPORT_SYMBOL(pci_scan_slot);
+#endif

drivers/pci/proc.c

@@ -6,11 +6,9 @@
  *	Copyright (c) 1997--1999 Martin Mares <mj@ucw.cz>
  */
 
-#include <linux/types.h>
-#include <linux/kernel.h>
 #include <linux/pci.h>
+#include <linux/module.h>
 #include <linux/proc_fs.h>
-#include <linux/init.h>
 #include <linux/seq_file.h>
 #include <linux/smp_lock.h>
 
@@ -615,3 +613,11 @@ static int __init pci_proc_init(void)
 }
 
 __initcall(pci_proc_init);
+
+#ifdef CONFIG_HOTPLUG
+EXPORT_SYMBOL(pci_proc_attach_device);
+EXPORT_SYMBOL(pci_proc_detach_device);
+EXPORT_SYMBOL(pci_proc_attach_bus);
+EXPORT_SYMBOL(pci_proc_detach_bus);
+#endif
+

drivers/pci/search.c

+#include <linux/pci.h>
+#include <linux/module.h>
+
+/**
+ * pci_find_slot - locate PCI device from a given PCI slot
+ * @bus: number of PCI bus on which desired PCI device resides
+ * @devfn: encodes number of PCI slot in which the desired PCI 
+ * device resides and the logical device number within that slot 
+ * in case of multi-function devices.
+ *
+ * Given a PCI bus and slot/function number, the desired PCI device 
+ * is located in system global list of PCI devices.  If the device
+ * is found, a pointer to its data structure is returned.  If no 
+ * device is found, %NULL is returned.
+ */
+struct pci_dev *
+pci_find_slot(unsigned int bus, unsigned int devfn)
+{
+	struct pci_dev *dev;
+
+	pci_for_each_dev(dev) {
+		if (dev->bus->number == bus && dev->devfn == devfn)
+			return dev;
+	}
+	return NULL;
+}
+
+/**
+ * pci_find_subsys - begin or continue searching for a PCI device by vendor/subvendor/device/subdevice id
+ * @vendor: PCI vendor id to match, or %PCI_ANY_ID to match all vendor ids
+ * @device: PCI device id to match, or %PCI_ANY_ID to match all device ids
+ * @ss_vendor: PCI subsystem vendor id to match, or %PCI_ANY_ID to match all vendor ids
+ * @ss_device: PCI subsystem device id to match, or %PCI_ANY_ID to match all device ids
+ * @from: Previous PCI device found in search, or %NULL for new search.
+ *
+ * Iterates through the list of known PCI devices.  If a PCI device is
+ * found with a matching @vendor, @device, @ss_vendor and @ss_device, a pointer to its
+ * device structure is returned.  Otherwise, %NULL is returned.
+ * A new search is initiated by passing %NULL to the @from argument.
+ * Otherwise if @from is not %NULL, searches continue from next device on the global list.
+ */
+struct pci_dev *
+pci_find_subsys(unsigned int vendor, unsigned int device,
+		unsigned int ss_vendor, unsigned int ss_device,
+		const struct pci_dev *from)
+{
+	struct list_head *n = from ? from->global_list.next : pci_devices.next;
+
+	while (n != &pci_devices) {
+		struct pci_dev *dev = pci_dev_g(n);
+		if ((vendor == PCI_ANY_ID || dev->vendor == vendor) &&
+		    (device == PCI_ANY_ID || dev->device == device) &&
+		    (ss_vendor == PCI_ANY_ID || dev->subsystem_vendor == ss_vendor) &&
+		    (ss_device == PCI_ANY_ID || dev->subsystem_device == ss_device))
+			return dev;
+		n = n->next;
+	}
+	return NULL;
+}
+
+
+/**
+ * pci_find_device - begin or continue searching for a PCI device by vendor/device id
+ * @vendor: PCI vendor id to match, or %PCI_ANY_ID to match all vendor ids
+ * @device: PCI device id to match, or %PCI_ANY_ID to match all device ids
+ * @from: Previous PCI device found in search, or %NULL for new search.
+ *
+ * Iterates through the list of known PCI devices.  If a PCI device is
+ * found with a matching @vendor and @device, a pointer to its device structure is
+ * returned.  Otherwise, %NULL is returned.
+ * A new search is initiated by passing %NULL to the @from argument.
+ * Otherwise if @from is not %NULL, searches continue from next device on the global list.
+ */
+struct pci_dev *
+pci_find_device(unsigned int vendor, unsigned int device, const struct pci_dev *from)
+{
+	return pci_find_subsys(vendor, device, PCI_ANY_ID, PCI_ANY_ID, from);
+}
+
+
+/**
+ * pci_find_class - begin or continue searching for a PCI device by class
+ * @class: search for a PCI device with this class designation
+ * @from: Previous PCI device found in search, or %NULL for new search.
+ *
+ * Iterates through the list of known PCI devices.  If a PCI device is
+ * found with a matching @class, a pointer to its device structure is
+ * returned.  Otherwise, %NULL is returned.
+ * A new search is initiated by passing %NULL to the @from argument.
+ * Otherwise if @from is not %NULL, searches continue from next device
+ * on the global list.
+ */
+struct pci_dev *
+pci_find_class(unsigned int class, const struct pci_dev *from)
+{
+	struct list_head *n = from ? from->global_list.next : pci_devices.next;
+
+	while (n != &pci_devices) {
+		struct pci_dev *dev = pci_dev_g(n);
+		if (dev->class == class)
+			return dev;
+		n = n->next;
+	}
+	return NULL;
+}
+
+EXPORT_SYMBOL(pci_find_class);
+EXPORT_SYMBOL(pci_find_device);
+EXPORT_SYMBOL(pci_find_slot);
+EXPORT_SYMBOL(pci_find_subsys);

include/linux/pci.h

@@ -495,7 +495,6 @@ struct pci_driver {
 #define pci_for_each_dev(dev) \
 	for(dev = pci_dev_g(pci_devices.next); dev != pci_dev_g(&pci_devices); dev = pci_dev_g(dev->global_list.next))
 
-void pcibios_init(void);
 void pcibios_fixup_bus(struct pci_bus *);
 int pcibios_enable_device(struct pci_dev *);
 char *pcibios_setup (char *str);