Commit c91c1c84 authored by Lorenzo Bianconi's avatar Lorenzo Bianconi Committed by Jonathan Cameron

iio: imu: st_lsm6dsx: add i2c embedded controller support

i2c controller embedded in lsm6dx series can connect up to four
slave devices using accelerometer sensor as trigger for i2c
read/write operations.
Introduce sensor hub support for lsm6dso sensor. Add register map
for lis2mdl magnetometer sensor.
In order to perform single read/write operations st_lsm6dsx driver
relies on SLV0 channel (hw FIFO is not supported yet)
Signed-off-by: default avatarLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent 17750443
st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \
st_lsm6dsx_shub.o
obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o
obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o
......
...@@ -43,6 +43,24 @@ enum st_lsm6dsx_hw_id { ...@@ -43,6 +43,24 @@ enum st_lsm6dsx_hw_id {
* ST_LSM6DSX_TAGGED_SAMPLE_SIZE) * ST_LSM6DSX_TAGGED_SAMPLE_SIZE)
#define ST_LSM6DSX_SHIFT_VAL(val, mask) (((val) << __ffs(mask)) & (mask)) #define ST_LSM6DSX_SHIFT_VAL(val, mask) (((val) << __ffs(mask)) & (mask))
#define ST_LSM6DSX_CHANNEL(chan_type, addr, mod, scan_idx) \
{ \
.type = chan_type, \
.address = addr, \
.modified = 1, \
.channel2 = mod, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(IIO_CHAN_INFO_SCALE), \
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
.scan_index = scan_idx, \
.scan_type = { \
.sign = 's', \
.realbits = 16, \
.storagebits = 16, \
.endianness = IIO_LE, \
}, \
}
struct st_lsm6dsx_reg { struct st_lsm6dsx_reg {
u8 addr; u8 addr;
u8 mask; u8 mask;
...@@ -50,6 +68,28 @@ struct st_lsm6dsx_reg { ...@@ -50,6 +68,28 @@ struct st_lsm6dsx_reg {
struct st_lsm6dsx_hw; struct st_lsm6dsx_hw;
struct st_lsm6dsx_odr {
u16 hz;
u8 val;
};
#define ST_LSM6DSX_ODR_LIST_SIZE 6
struct st_lsm6dsx_odr_table_entry {
struct st_lsm6dsx_reg reg;
struct st_lsm6dsx_odr odr_avl[ST_LSM6DSX_ODR_LIST_SIZE];
};
struct st_lsm6dsx_fs {
u32 gain;
u8 val;
};
#define ST_LSM6DSX_FS_LIST_SIZE 4
struct st_lsm6dsx_fs_table_entry {
struct st_lsm6dsx_reg reg;
struct st_lsm6dsx_fs fs_avl[ST_LSM6DSX_FS_LIST_SIZE];
};
/** /**
* struct st_lsm6dsx_fifo_ops - ST IMU FIFO settings * struct st_lsm6dsx_fifo_ops - ST IMU FIFO settings
* @read_fifo: Read FIFO callback. * @read_fifo: Read FIFO callback.
...@@ -84,6 +124,66 @@ struct st_lsm6dsx_hw_ts_settings { ...@@ -84,6 +124,66 @@ struct st_lsm6dsx_hw_ts_settings {
struct st_lsm6dsx_reg decimator; struct st_lsm6dsx_reg decimator;
}; };
/**
* struct st_lsm6dsx_shub_settings - ST IMU hw i2c controller settings
* @page_mux: register page mux info (addr + mask).
* @master_en: master config register info (addr + mask).
* @pullup_en: i2c controller pull-up register info (addr + mask).
* @aux_sens: aux sensor register info (addr + mask).
* @shub_out: sensor hub first output register info.
* @slv0_addr: slave0 address in secondary page.
* @dw_slv0_addr: slave0 write register address in secondary page.
*/
struct st_lsm6dsx_shub_settings {
struct st_lsm6dsx_reg page_mux;
struct st_lsm6dsx_reg master_en;
struct st_lsm6dsx_reg pullup_en;
struct st_lsm6dsx_reg aux_sens;
u8 shub_out;
u8 slv0_addr;
u8 dw_slv0_addr;
};
enum st_lsm6dsx_ext_sensor_id {
ST_LSM6DSX_ID_MAGN,
};
/**
* struct st_lsm6dsx_ext_dev_settings - i2c controller slave settings
* @i2c_addr: I2c slave address list.
* @wai: Wai address info.
* @id: external sensor id.
* @odr: Output data rate of the sensor [Hz].
* @gain: Configured sensor sensitivity.
* @temp_comp: Temperature compensation register info (addr + mask).
* @pwr_table: Power on register info (addr + mask).
* @off_canc: Offset cancellation register info (addr + mask).
* @bdu: Block data update register info (addr + mask).
* @out: Output register info.
*/
struct st_lsm6dsx_ext_dev_settings {
u8 i2c_addr[2];
struct {
u8 addr;
u8 val;
} wai;
enum st_lsm6dsx_ext_sensor_id id;
struct st_lsm6dsx_odr_table_entry odr_table;
struct st_lsm6dsx_fs_table_entry fs_table;
struct st_lsm6dsx_reg temp_comp;
struct {
struct st_lsm6dsx_reg reg;
u8 off_val;
u8 on_val;
} pwr_table;
struct st_lsm6dsx_reg off_canc;
struct st_lsm6dsx_reg bdu;
struct {
u8 addr;
u8 len;
} out;
};
/** /**
* struct st_lsm6dsx_settings - ST IMU sensor settings * struct st_lsm6dsx_settings - ST IMU sensor settings
* @wai: Sensor WhoAmI default value. * @wai: Sensor WhoAmI default value.
...@@ -93,6 +193,7 @@ struct st_lsm6dsx_hw_ts_settings { ...@@ -93,6 +193,7 @@ struct st_lsm6dsx_hw_ts_settings {
* @batch: List of FIFO batching register info (addr + mask). * @batch: List of FIFO batching register info (addr + mask).
* @fifo_ops: Sensor hw FIFO parameters. * @fifo_ops: Sensor hw FIFO parameters.
* @ts_settings: Hw timer related settings. * @ts_settings: Hw timer related settings.
* @shub_settings: i2c controller related settings.
*/ */
struct st_lsm6dsx_settings { struct st_lsm6dsx_settings {
u8 wai; u8 wai;
...@@ -102,6 +203,7 @@ struct st_lsm6dsx_settings { ...@@ -102,6 +203,7 @@ struct st_lsm6dsx_settings {
struct st_lsm6dsx_reg batch[ST_LSM6DSX_MAX_ID]; struct st_lsm6dsx_reg batch[ST_LSM6DSX_MAX_ID];
struct st_lsm6dsx_fifo_ops fifo_ops; struct st_lsm6dsx_fifo_ops fifo_ops;
struct st_lsm6dsx_hw_ts_settings ts_settings; struct st_lsm6dsx_hw_ts_settings ts_settings;
struct st_lsm6dsx_shub_settings shub_settings;
}; };
enum st_lsm6dsx_sensor_id { enum st_lsm6dsx_sensor_id {
...@@ -129,6 +231,7 @@ enum st_lsm6dsx_fifo_mode { ...@@ -129,6 +231,7 @@ enum st_lsm6dsx_fifo_mode {
* @sip: Number of samples in a given pattern. * @sip: Number of samples in a given pattern.
* @decimator: FIFO decimation factor. * @decimator: FIFO decimation factor.
* @ts_ref: Sensor timestamp reference for hw one. * @ts_ref: Sensor timestamp reference for hw one.
* @ext_info: Sensor settings if it is connected to i2c controller
*/ */
struct st_lsm6dsx_sensor { struct st_lsm6dsx_sensor {
char name[32]; char name[32];
...@@ -142,6 +245,11 @@ struct st_lsm6dsx_sensor { ...@@ -142,6 +245,11 @@ struct st_lsm6dsx_sensor {
u8 sip; u8 sip;
u8 decimator; u8 decimator;
s64 ts_ref; s64 ts_ref;
struct {
const struct st_lsm6dsx_ext_dev_settings *settings;
u8 addr;
} ext_info;
}; };
/** /**
...@@ -181,6 +289,7 @@ struct st_lsm6dsx_hw { ...@@ -181,6 +289,7 @@ struct st_lsm6dsx_hw {
const struct st_lsm6dsx_settings *settings; const struct st_lsm6dsx_settings *settings;
}; };
static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0};
extern const struct dev_pm_ops st_lsm6dsx_pm_ops; extern const struct dev_pm_ops st_lsm6dsx_pm_ops;
int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name, int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name,
...@@ -197,6 +306,9 @@ int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw, ...@@ -197,6 +306,9 @@ int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw,
int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw); int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw);
int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw); int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw);
int st_lsm6dsx_check_odr(struct st_lsm6dsx_sensor *sensor, u16 odr, u8 *val); int st_lsm6dsx_check_odr(struct st_lsm6dsx_sensor *sensor, u16 odr, u8 *val);
int st_lsm6dsx_shub_probe(struct st_lsm6dsx_hw *hw, const char *name);
int st_lsm6dsx_shub_set_enable(struct st_lsm6dsx_sensor *sensor, bool enable);
int st_lsm6dsx_set_page(struct st_lsm6dsx_hw *hw, bool enable);
static inline int static inline int
st_lsm6dsx_update_bits_locked(struct st_lsm6dsx_hw *hw, unsigned int addr, st_lsm6dsx_update_bits_locked(struct st_lsm6dsx_hw *hw, unsigned int addr,
......
...@@ -88,17 +88,6 @@ ...@@ -88,17 +88,6 @@
#define ST_LSM6DSX_GYRO_FS_1000_GAIN IIO_DEGREE_TO_RAD(35000) #define ST_LSM6DSX_GYRO_FS_1000_GAIN IIO_DEGREE_TO_RAD(35000)
#define ST_LSM6DSX_GYRO_FS_2000_GAIN IIO_DEGREE_TO_RAD(70000) #define ST_LSM6DSX_GYRO_FS_2000_GAIN IIO_DEGREE_TO_RAD(70000)
struct st_lsm6dsx_odr {
u16 hz;
u8 val;
};
#define ST_LSM6DSX_ODR_LIST_SIZE 6
struct st_lsm6dsx_odr_table_entry {
struct st_lsm6dsx_reg reg;
struct st_lsm6dsx_odr odr_avl[ST_LSM6DSX_ODR_LIST_SIZE];
};
static const struct st_lsm6dsx_odr_table_entry st_lsm6dsx_odr_table[] = { static const struct st_lsm6dsx_odr_table_entry st_lsm6dsx_odr_table[] = {
[ST_LSM6DSX_ID_ACC] = { [ST_LSM6DSX_ID_ACC] = {
.reg = { .reg = {
...@@ -126,17 +115,6 @@ static const struct st_lsm6dsx_odr_table_entry st_lsm6dsx_odr_table[] = { ...@@ -126,17 +115,6 @@ static const struct st_lsm6dsx_odr_table_entry st_lsm6dsx_odr_table[] = {
} }
}; };
struct st_lsm6dsx_fs {
u32 gain;
u8 val;
};
#define ST_LSM6DSX_FS_LIST_SIZE 4
struct st_lsm6dsx_fs_table_entry {
struct st_lsm6dsx_reg reg;
struct st_lsm6dsx_fs fs_avl[ST_LSM6DSX_FS_LIST_SIZE];
};
static const struct st_lsm6dsx_fs_table_entry st_lsm6dsx_fs_table[] = { static const struct st_lsm6dsx_fs_table_entry st_lsm6dsx_fs_table[] = {
[ST_LSM6DSX_ID_ACC] = { [ST_LSM6DSX_ID_ACC] = {
.reg = { .reg = {
...@@ -342,27 +320,30 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { ...@@ -342,27 +320,30 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.mask = GENMASK(7, 6), .mask = GENMASK(7, 6),
}, },
}, },
.shub_settings = {
.page_mux = {
.addr = 0x01,
.mask = BIT(6),
},
.master_en = {
.addr = 0x14,
.mask = BIT(2),
},
.pullup_en = {
.addr = 0x14,
.mask = BIT(3),
},
.aux_sens = {
.addr = 0x14,
.mask = GENMASK(1, 0),
},
.shub_out = 0x02,
.slv0_addr = 0x15,
.dw_slv0_addr = 0x21,
}
}, },
}; };
#define ST_LSM6DSX_CHANNEL(chan_type, addr, mod, scan_idx) \
{ \
.type = chan_type, \
.address = addr, \
.modified = 1, \
.channel2 = mod, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(IIO_CHAN_INFO_SCALE), \
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
.scan_index = scan_idx, \
.scan_type = { \
.sign = 's', \
.realbits = 16, \
.storagebits = 16, \
.endianness = IIO_LE, \
}, \
}
static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = { static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
ST_LSM6DSX_CHANNEL(IIO_ACCEL, ST_LSM6DSX_REG_ACC_OUT_X_L_ADDR, ST_LSM6DSX_CHANNEL(IIO_ACCEL, ST_LSM6DSX_REG_ACC_OUT_X_L_ADDR,
IIO_MOD_X, 0), IIO_MOD_X, 0),
...@@ -383,6 +364,21 @@ static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = { ...@@ -383,6 +364,21 @@ static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(3), IIO_CHAN_SOFT_TIMESTAMP(3),
}; };
int st_lsm6dsx_set_page(struct st_lsm6dsx_hw *hw, bool enable)
{
const struct st_lsm6dsx_shub_settings *hub_settings;
unsigned int data;
int err;
hub_settings = &hw->settings->shub_settings;
data = ST_LSM6DSX_SHIFT_VAL(enable, hub_settings->page_mux.mask);
err = regmap_update_bits(hw->regmap, hub_settings->page_mux.addr,
hub_settings->page_mux.mask, data);
usleep_range(100, 150);
return err;
}
static int st_lsm6dsx_check_whoami(struct st_lsm6dsx_hw *hw, int id) static int st_lsm6dsx_check_whoami(struct st_lsm6dsx_hw *hw, int id)
{ {
int err, i, j, data; int err, i, j, data;
...@@ -736,8 +732,6 @@ static const struct iio_info st_lsm6dsx_gyro_info = { ...@@ -736,8 +732,6 @@ static const struct iio_info st_lsm6dsx_gyro_info = {
.hwfifo_set_watermark = st_lsm6dsx_set_watermark, .hwfifo_set_watermark = st_lsm6dsx_set_watermark,
}; };
static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0};
static int st_lsm6dsx_of_get_drdy_pin(struct st_lsm6dsx_hw *hw, int *drdy_pin) static int st_lsm6dsx_of_get_drdy_pin(struct st_lsm6dsx_hw *hw, int *drdy_pin)
{ {
struct device_node *np = hw->dev->of_node; struct device_node *np = hw->dev->of_node;
...@@ -776,6 +770,51 @@ static int st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw, u8 *drdy_reg) ...@@ -776,6 +770,51 @@ static int st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw, u8 *drdy_reg)
return err; return err;
} }
static int st_lsm6dsx_init_shub(struct st_lsm6dsx_hw *hw)
{
const struct st_lsm6dsx_shub_settings *hub_settings;
struct device_node *np = hw->dev->of_node;
struct st_sensors_platform_data *pdata;
unsigned int data;
int err = 0;
hub_settings = &hw->settings->shub_settings;
pdata = (struct st_sensors_platform_data *)hw->dev->platform_data;
if ((np && of_property_read_bool(np, "st,pullups")) ||
(pdata && pdata->pullups)) {
err = st_lsm6dsx_set_page(hw, true);
if (err < 0)
return err;
data = ST_LSM6DSX_SHIFT_VAL(1, hub_settings->pullup_en.mask);
err = regmap_update_bits(hw->regmap,
hub_settings->pullup_en.addr,
hub_settings->pullup_en.mask, data);
st_lsm6dsx_set_page(hw, false);
if (err < 0)
return err;
}
if (hub_settings->aux_sens.addr) {
/* configure aux sensors */
err = st_lsm6dsx_set_page(hw, true);
if (err < 0)
return err;
data = ST_LSM6DSX_SHIFT_VAL(3, hub_settings->aux_sens.mask);
err = regmap_update_bits(hw->regmap,
hub_settings->aux_sens.addr,
hub_settings->aux_sens.mask, data);
st_lsm6dsx_set_page(hw, false);
}
return err;
}
static int st_lsm6dsx_init_hw_timer(struct st_lsm6dsx_hw *hw) static int st_lsm6dsx_init_hw_timer(struct st_lsm6dsx_hw *hw)
{ {
const struct st_lsm6dsx_hw_ts_settings *ts_settings; const struct st_lsm6dsx_hw_ts_settings *ts_settings;
...@@ -856,6 +895,10 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw) ...@@ -856,6 +895,10 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
if (err < 0) if (err < 0)
return err; return err;
err = st_lsm6dsx_init_shub(hw);
if (err < 0)
return err;
return st_lsm6dsx_init_hw_timer(hw); return st_lsm6dsx_init_hw_timer(hw);
} }
...@@ -909,6 +952,7 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw, ...@@ -909,6 +952,7 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name, int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name,
struct regmap *regmap) struct regmap *regmap)
{ {
const struct st_lsm6dsx_shub_settings *hub_settings;
struct st_lsm6dsx_hw *hw; struct st_lsm6dsx_hw *hw;
int i, err; int i, err;
...@@ -944,6 +988,13 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name, ...@@ -944,6 +988,13 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name,
if (err < 0) if (err < 0)
return err; return err;
hub_settings = &hw->settings->shub_settings;
if (hub_settings->master_en.addr) {
err = st_lsm6dsx_shub_probe(hw, name);
if (err < 0)
return err;
}
if (hw->irq > 0) { if (hw->irq > 0) {
err = st_lsm6dsx_fifo_setup(hw); err = st_lsm6dsx_fifo_setup(hw);
if (err < 0) if (err < 0)
......
/*
* STMicroelectronics st_lsm6dsx i2c controller driver
*
* i2c controller embedded in lsm6dx series can connect up to four
* slave devices using accelerometer sensor as trigger for i2c
* read/write operations. Current implementation relies on SLV0 channel
* for slave configuration and SLV{1,2,3} to read data and push them into
* the hw FIFO
*
* Copyright (C) 2018 Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/bitfield.h>
#include "st_lsm6dsx.h"
#define ST_LSM6DSX_MAX_SLV_NUM 3
#define ST_LSM6DSX_SLV_ADDR(n, base) ((base) + (n) * 3)
#define ST_LSM6DSX_SLV_SUB_ADDR(n, base) ((base) + 1 + (n) * 3)
#define ST_LSM6DSX_SLV_CONFIG(n, base) ((base) + 2 + (n) * 3)
#define ST_LS6DSX_READ_OP_MASK GENMASK(2, 0)
static const struct st_lsm6dsx_ext_dev_settings st_lsm6dsx_ext_dev_table[] = {
/* LIS2MDL */
{
.i2c_addr = { 0x1e },
.wai = {
.addr = 0x4f,
.val = 0x40,
},
.id = ST_LSM6DSX_ID_MAGN,
.odr_table = {
.reg = {
.addr = 0x60,
.mask = GENMASK(3, 2),
},
.odr_avl[0] = { 10, 0x0 },
.odr_avl[1] = { 20, 0x1 },
.odr_avl[2] = { 50, 0x2 },
.odr_avl[3] = { 100, 0x3 },
},
.fs_table = {
.fs_avl[0] = {
.gain = 1500,
.val = 0x0,
}, /* 1500 uG/LSB */
},
.temp_comp = {
.addr = 0x60,
.mask = BIT(7),
},
.pwr_table = {
.reg = {
.addr = 0x60,
.mask = GENMASK(1, 0),
},
.off_val = 0x2,
.on_val = 0x0,
},
.off_canc = {
.addr = 0x61,
.mask = BIT(1),
},
.bdu = {
.addr = 0x62,
.mask = BIT(4),
},
.out = {
.addr = 0x68,
.len = 6,
},
},
};
static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw)
{
struct st_lsm6dsx_sensor *sensor;
sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
msleep((2000U / sensor->odr) + 1);
}
/**
* st_lsm6dsx_shub_read_reg - read i2c controller register
*
* Read st_lsm6dsx i2c controller register
*/
static int st_lsm6dsx_shub_read_reg(struct st_lsm6dsx_hw *hw, u8 addr,
u8 *data, int len)
{
const struct st_lsm6dsx_shub_settings *hub_settings;
int err;
mutex_lock(&hw->page_lock);
hub_settings = &hw->settings->shub_settings;
err = st_lsm6dsx_set_page(hw, true);
if (err < 0)
goto out;
err = regmap_bulk_read(hw->regmap, addr, data, len);
st_lsm6dsx_set_page(hw, false);
out:
mutex_unlock(&hw->page_lock);
return err;
}
/**
* st_lsm6dsx_shub_write_reg - write i2c controller register
*
* Write st_lsm6dsx i2c controller register
*/
static int st_lsm6dsx_shub_write_reg(struct st_lsm6dsx_hw *hw, u8 addr,
u8 *data, int len)
{
int err;
mutex_lock(&hw->page_lock);
err = st_lsm6dsx_set_page(hw, true);
if (err < 0)
goto out;
err = regmap_bulk_write(hw->regmap, addr, data, len);
st_lsm6dsx_set_page(hw, false);
out:
mutex_unlock(&hw->page_lock);
return err;
}
static int st_lsm6dsx_shub_master_enable(struct st_lsm6dsx_sensor *sensor,
bool enable)
{
const struct st_lsm6dsx_shub_settings *hub_settings;
struct st_lsm6dsx_hw *hw = sensor->hw;
unsigned int data;
int err;
/* enable acc sensor as trigger */
err = st_lsm6dsx_sensor_set_enable(sensor, enable);
if (err < 0)
return err;
mutex_lock(&hw->page_lock);
hub_settings = &hw->settings->shub_settings;
err = st_lsm6dsx_set_page(hw, true);
if (err < 0)
goto out;
data = ST_LSM6DSX_SHIFT_VAL(enable, hub_settings->master_en.mask);
err = regmap_update_bits(hw->regmap, hub_settings->master_en.addr,
hub_settings->master_en.mask, data);
st_lsm6dsx_set_page(hw, false);
out:
mutex_unlock(&hw->page_lock);
return err;
}
/**
* st_lsm6dsx_shub_read - read data from slave device register
*
* Read data from slave device register. SLV0 is used for
* one-shot read operation
*/
static int
st_lsm6dsx_shub_read(struct st_lsm6dsx_sensor *sensor, u8 addr,
u8 *data, int len)
{
const struct st_lsm6dsx_shub_settings *hub_settings;
struct st_lsm6dsx_hw *hw = sensor->hw;
u8 config[3], slv_addr;
int err;
hub_settings = &hw->settings->shub_settings;
slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr);
config[0] = (sensor->ext_info.addr << 1) | 1;
config[1] = addr;
config[2] = len & ST_LS6DSX_READ_OP_MASK;
err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
sizeof(config));
if (err < 0)
return err;
err = st_lsm6dsx_shub_master_enable(sensor, true);
if (err < 0)
return err;
st_lsm6dsx_shub_wait_complete(hw);
err = st_lsm6dsx_shub_read_reg(hw, hub_settings->shub_out, data,
len & ST_LS6DSX_READ_OP_MASK);
st_lsm6dsx_shub_master_enable(sensor, false);
memset(config, 0, sizeof(config));
return st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
sizeof(config));
}
/**
* st_lsm6dsx_shub_write - write data to slave device register
*
* Write data from slave device register. SLV0 is used for
* one-shot write operation
*/
static int
st_lsm6dsx_shub_write(struct st_lsm6dsx_sensor *sensor, u8 addr,
u8 *data, int len)
{
const struct st_lsm6dsx_shub_settings *hub_settings;
struct st_lsm6dsx_hw *hw = sensor->hw;
u8 config[2], slv_addr;
int err, i;
hub_settings = &hw->settings->shub_settings;
slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr);
config[0] = sensor->ext_info.addr << 1;
for (i = 0 ; i < len; i++) {
config[1] = addr + i;
err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
sizeof(config));
if (err < 0)
return err;
err = st_lsm6dsx_shub_write_reg(hw, hub_settings->dw_slv0_addr,
&data[i], 1);
if (err < 0)
return err;
err = st_lsm6dsx_shub_master_enable(sensor, true);
if (err < 0)
return err;
st_lsm6dsx_shub_wait_complete(hw);
st_lsm6dsx_shub_master_enable(sensor, false);
}
memset(config, 0, sizeof(config));
return st_lsm6dsx_shub_write_reg(hw, slv_addr, config, sizeof(config));
}
static int
st_lsm6dsx_shub_write_with_mask(struct st_lsm6dsx_sensor *sensor,
u8 addr, u8 mask, u8 val)
{
int err;
u8 data;
err = st_lsm6dsx_shub_read(sensor, addr, &data, sizeof(data));
if (err < 0)
return err;
data = ((data & ~mask) | (val << __ffs(mask) & mask));
return st_lsm6dsx_shub_write(sensor, addr, &data, sizeof(data));
}
static int
st_lsm6dsx_shub_get_odr_val(struct st_lsm6dsx_sensor *sensor,
u16 odr, u16 *val)
{
const struct st_lsm6dsx_ext_dev_settings *settings;
int i;
settings = sensor->ext_info.settings;
for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++)
if (settings->odr_table.odr_avl[i].hz == odr)
break;
if (i == ST_LSM6DSX_ODR_LIST_SIZE)
return -EINVAL;
*val = settings->odr_table.odr_avl[i].val;
return 0;
}
static int
st_lsm6dsx_shub_set_odr(struct st_lsm6dsx_sensor *sensor, u16 odr)
{
const struct st_lsm6dsx_ext_dev_settings *settings;
u16 val;
int err;
err = st_lsm6dsx_shub_get_odr_val(sensor, odr, &val);
if (err < 0)
return err;
settings = sensor->ext_info.settings;
return st_lsm6dsx_shub_write_with_mask(sensor,
settings->odr_table.reg.addr,
settings->odr_table.reg.mask,
val);
}
int st_lsm6dsx_shub_set_enable(struct st_lsm6dsx_sensor *sensor, bool enable)
{
const struct st_lsm6dsx_ext_dev_settings *settings;
int err;
settings = sensor->ext_info.settings;
if (enable) {
err = st_lsm6dsx_shub_set_odr(sensor, sensor->odr);
if (err < 0)
return err;
} else {
err = st_lsm6dsx_shub_write_with_mask(sensor,
settings->odr_table.reg.addr,
settings->odr_table.reg.mask, 0);
if (err < 0)
return err;
}
if (settings->pwr_table.reg.addr) {
u8 val;
val = enable ? settings->pwr_table.on_val
: settings->pwr_table.off_val;
err = st_lsm6dsx_shub_write_with_mask(sensor,
settings->pwr_table.reg.addr,
settings->pwr_table.reg.mask, val);
if (err < 0)
return err;
}
return st_lsm6dsx_shub_master_enable(sensor, enable);
}
static int
st_lsm6dsx_shub_read_oneshot(struct st_lsm6dsx_sensor *sensor,
struct iio_chan_spec const *ch,
int *val)
{
int err, delay, len = ch->scan_type.realbits >> 3;
__le16 data;
err = st_lsm6dsx_shub_set_enable(sensor, true);
if (err < 0)
return err;
delay = 1000000 / sensor->odr;
usleep_range(delay, 2 * delay);
err = st_lsm6dsx_shub_read(sensor, ch->address, (u8 *)&data, len);
if (err < 0)
return err;
st_lsm6dsx_shub_set_enable(sensor, false);
switch (len) {
case 2:
*val = (s16)le16_to_cpu(data);
break;
default:
return -EINVAL;
}
return IIO_VAL_INT;
}
static int
st_lsm6dsx_shub_read_raw(struct iio_dev *iio_dev,
struct iio_chan_spec const *ch,
int *val, int *val2, long mask)
{
struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
int ret;
switch (mask) {
case IIO_CHAN_INFO_RAW:
ret = iio_device_claim_direct_mode(iio_dev);
if (ret)
break;
ret = st_lsm6dsx_shub_read_oneshot(sensor, ch, val);
iio_device_release_direct_mode(iio_dev);
break;
case IIO_CHAN_INFO_SAMP_FREQ:
*val = sensor->odr;
ret = IIO_VAL_INT;
break;
case IIO_CHAN_INFO_SCALE:
*val = 0;
*val2 = sensor->gain;
ret = IIO_VAL_INT_PLUS_MICRO;
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static int
st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
{
struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
int err;
err = iio_device_claim_direct_mode(iio_dev);
if (err)
return err;
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ: {
u16 data;
err = st_lsm6dsx_shub_get_odr_val(sensor, val, &data);
if (!err)
sensor->odr = val;
break;
}
default:
err = -EINVAL;
break;
}
iio_device_release_direct_mode(iio_dev);
return err;
}
static ssize_t
st_lsm6dsx_shub_sampling_freq_avail(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev));
const struct st_lsm6dsx_ext_dev_settings *settings;
int i, len = 0;
settings = sensor->ext_info.settings;
for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++) {
u16 val = settings->odr_table.odr_avl[i].hz;
if (val > 0)
len += scnprintf(buf + len, PAGE_SIZE - len, "%d ",
val);
}
buf[len - 1] = '\n';
return len;
}
static ssize_t st_lsm6dsx_shub_scale_avail(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev));
const struct st_lsm6dsx_ext_dev_settings *settings;
int i, len = 0;
settings = sensor->ext_info.settings;
for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++) {
u16 val = settings->fs_table.fs_avl[i].gain;
if (val > 0)
len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ",
val);
}
buf[len - 1] = '\n';
return len;
}
static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(st_lsm6dsx_shub_sampling_freq_avail);
static IIO_DEVICE_ATTR(in_scale_available, 0444,
st_lsm6dsx_shub_scale_avail, NULL, 0);
static struct attribute *st_lsm6dsx_ext_attributes[] = {
&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
&iio_dev_attr_in_scale_available.dev_attr.attr,
NULL,
};
static const struct attribute_group st_lsm6dsx_ext_attribute_group = {
.attrs = st_lsm6dsx_ext_attributes,
};
static const struct iio_info st_lsm6dsx_ext_info = {
.attrs = &st_lsm6dsx_ext_attribute_group,
.read_raw = st_lsm6dsx_shub_read_raw,
.write_raw = st_lsm6dsx_shub_write_raw,
.hwfifo_set_watermark = st_lsm6dsx_set_watermark,
};
static struct iio_dev *
st_lsm6dsx_shub_alloc_iiodev(struct st_lsm6dsx_hw *hw,
enum st_lsm6dsx_sensor_id id,
const struct st_lsm6dsx_ext_dev_settings *info,
u8 i2c_addr, const char *name)
{
struct iio_chan_spec *ext_channels;
struct st_lsm6dsx_sensor *sensor;
struct iio_dev *iio_dev;
iio_dev = devm_iio_device_alloc(hw->dev, sizeof(*sensor));
if (!iio_dev)
return NULL;
iio_dev->modes = INDIO_DIRECT_MODE;
iio_dev->dev.parent = hw->dev;
iio_dev->info = &st_lsm6dsx_ext_info;
sensor = iio_priv(iio_dev);
sensor->id = id;
sensor->hw = hw;
sensor->odr = info->odr_table.odr_avl[0].hz;
sensor->gain = info->fs_table.fs_avl[0].gain;
sensor->ext_info.settings = info;
sensor->ext_info.addr = i2c_addr;
sensor->watermark = 1;
switch (info->id) {
case ST_LSM6DSX_ID_MAGN: {
const struct iio_chan_spec magn_channels[] = {
ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr,
IIO_MOD_X, 0),
ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr + 2,
IIO_MOD_Y, 1),
ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr + 4,
IIO_MOD_Z, 2),
IIO_CHAN_SOFT_TIMESTAMP(3),
};
ext_channels = devm_kzalloc(hw->dev, sizeof(magn_channels),
GFP_KERNEL);
if (!ext_channels)
return NULL;
memcpy(ext_channels, magn_channels, sizeof(magn_channels));
iio_dev->available_scan_masks = st_lsm6dsx_available_scan_masks;
iio_dev->channels = ext_channels;
iio_dev->num_channels = ARRAY_SIZE(magn_channels);
scnprintf(sensor->name, sizeof(sensor->name), "%s_magn",
name);
break;
}
default:
return NULL;
}
iio_dev->name = sensor->name;
return iio_dev;
}
static int st_lsm6dsx_shub_init_device(struct st_lsm6dsx_sensor *sensor)
{
const struct st_lsm6dsx_ext_dev_settings *settings;
int err;
settings = sensor->ext_info.settings;
if (settings->bdu.addr) {
err = st_lsm6dsx_shub_write_with_mask(sensor,
settings->bdu.addr,
settings->bdu.mask, 1);
if (err < 0)
return err;
}
if (settings->temp_comp.addr) {
err = st_lsm6dsx_shub_write_with_mask(sensor,
settings->temp_comp.addr,
settings->temp_comp.mask, 1);
if (err < 0)
return err;
}
if (settings->off_canc.addr) {
err = st_lsm6dsx_shub_write_with_mask(sensor,
settings->off_canc.addr,
settings->off_canc.mask, 1);
if (err < 0)
return err;
}
return 0;
}
static int
st_lsm6dsx_shub_check_wai(struct st_lsm6dsx_hw *hw, u8 *i2c_addr,
const struct st_lsm6dsx_ext_dev_settings *settings)
{
const struct st_lsm6dsx_shub_settings *hub_settings;
struct st_lsm6dsx_sensor *sensor;
u8 config[3], data, slv_addr;
bool found = false;
int i, err;
hub_settings = &hw->settings->shub_settings;
slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr);
sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
for (i = 0; i < ARRAY_SIZE(settings->i2c_addr); i++) {
if (!settings->i2c_addr[i])
continue;
/* read wai slave register */
config[0] = (settings->i2c_addr[i] << 1) | 0x1;
config[1] = settings->wai.addr;
config[2] = 0x1;
err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
sizeof(config));
if (err < 0)
return err;
err = st_lsm6dsx_shub_master_enable(sensor, true);
if (err < 0)
return err;
st_lsm6dsx_shub_wait_complete(hw);
err = st_lsm6dsx_shub_read_reg(hw,
hub_settings->shub_out,
&data, sizeof(data));
st_lsm6dsx_shub_master_enable(sensor, false);
if (err < 0)
return err;
if (data != settings->wai.val)
continue;
*i2c_addr = settings->i2c_addr[i];
found = true;
break;
}
/* reset SLV0 channel */
memset(config, 0, sizeof(config));
err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
sizeof(config));
if (err < 0)
return err;
return found ? 0 : -ENODEV;
}
int st_lsm6dsx_shub_probe(struct st_lsm6dsx_hw *hw, const char *name)
{
enum st_lsm6dsx_sensor_id id = ST_LSM6DSX_ID_EXT0;
struct st_lsm6dsx_sensor *sensor;
int err, i, num_ext_dev = 0;
u8 i2c_addr = 0;
for (i = 0; i < ARRAY_SIZE(st_lsm6dsx_ext_dev_table); i++) {
err = st_lsm6dsx_shub_check_wai(hw, &i2c_addr,
&st_lsm6dsx_ext_dev_table[i]);
if (err == -ENODEV)
continue;
else if (err < 0)
return err;
hw->iio_devs[id] = st_lsm6dsx_shub_alloc_iiodev(hw, id,
&st_lsm6dsx_ext_dev_table[i],
i2c_addr, name);
if (!hw->iio_devs[id])
return -ENOMEM;
sensor = iio_priv(hw->iio_devs[id]);
err = st_lsm6dsx_shub_init_device(sensor);
if (err < 0)
return err;
if (++num_ext_dev >= ST_LSM6DSX_MAX_SLV_NUM)
break;
id++;
}
return 0;
}
...@@ -18,11 +18,13 @@ ...@@ -18,11 +18,13 @@
* Accelerometer DRDY on LSM330 available only on pin 1 (see datasheet). * Accelerometer DRDY on LSM330 available only on pin 1 (see datasheet).
* @open_drain: set the interrupt line to be open drain if possible. * @open_drain: set the interrupt line to be open drain if possible.
* @spi_3wire: enable spi-3wire mode. * @spi_3wire: enable spi-3wire mode.
* @pullups: enable/disable i2c controller pullup resistors.
*/ */
struct st_sensors_platform_data { struct st_sensors_platform_data {
u8 drdy_int_pin; u8 drdy_int_pin;
bool open_drain; bool open_drain;
bool spi_3wire; bool spi_3wire;
bool pullups;
}; };
#endif /* ST_SENSORS_PDATA_H */ #endif /* ST_SENSORS_PDATA_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment