Commit ca3dfa51 authored by Andrew Lunn's avatar Andrew Lunn Committed by David S. Miller

dsa: Rename mv88e6123_61_65 to mv88e6123 to be consistent

All the drivers support multiple chips, but mv88e6123_61_65 is the
only one that reflects this in its naming. Change it to be consistent
with the other drivers.
Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Reviewed-by: default avatarVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent dc91d7ef
......@@ -91,7 +91,7 @@ CONFIG_SATA_MV=y
CONFIG_NETDEVICES=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_NET_DSA_MV88E6123=y
CONFIG_NET_DSA_MV88E6171=y
CONFIG_NET_DSA_MV88E6352=y
CONFIG_MV643XX_ETH=y
......
......@@ -92,7 +92,7 @@ CONFIG_SATA_MV=y
CONFIG_NETDEVICES=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_NET_DSA_MV88E6123=y
CONFIG_NET_DSA_MV88E6171=y
CONFIG_NET_DSA_MV88E6352=y
CONFIG_MV643XX_ETH=y
......
......@@ -86,7 +86,7 @@ CONFIG_SATA_MV=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_NET_DSA_MV88E6123=y
CONFIG_MV643XX_ETH=y
CONFIG_MARVELL_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
......
......@@ -222,7 +222,7 @@ CONFIG_TUN=y
CONFIG_VETH=m
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_NET_DSA_MV88E6123=y
CONFIG_SKY2=y
CONFIG_PTP_1588_CLOCK_TILEGX=y
# CONFIG_WLAN is not set
......
......@@ -341,7 +341,7 @@ CONFIG_TUN=y
CONFIG_VETH=m
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_NET_DSA_MV88E6123=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_E1000E=y
# CONFIG_WLAN is not set
......
......@@ -27,7 +27,7 @@ config NET_DSA_MV88E6131
This enables support for the Marvell 88E6085/6095/6095F/6131
ethernet switch chips.
config NET_DSA_MV88E6123_61_65
config NET_DSA_MV88E6123
tristate "Marvell 88E6123/6161/6165 ethernet switch chip support"
depends on NET_DSA
select NET_DSA_MV88E6XXX
......
obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx_drv.o
mv88e6xxx_drv-y += mv88e6xxx.o
ifdef CONFIG_NET_DSA_MV88E6123_61_65
mv88e6xxx_drv-y += mv88e6123_61_65.o
ifdef CONFIG_NET_DSA_MV88E6123
mv88e6xxx_drv-y += mv88e6123.o
endif
ifdef CONFIG_NET_DSA_MV88E6131
mv88e6xxx_drv-y += mv88e6131.o
......
......@@ -17,7 +17,7 @@
#include <net/dsa.h>
#include "mv88e6xxx.h"
static const struct mv88e6xxx_switch_id mv88e6123_61_65_table[] = {
static const struct mv88e6xxx_switch_id mv88e6123_table[] = {
{ PORT_SWITCH_ID_6123, "Marvell 88E6123" },
{ PORT_SWITCH_ID_6123_A1, "Marvell 88E6123 (A1)" },
{ PORT_SWITCH_ID_6123_A2, "Marvell 88E6123 (A2)" },
......@@ -29,13 +29,13 @@ static const struct mv88e6xxx_switch_id mv88e6123_61_65_table[] = {
{ PORT_SWITCH_ID_6165_A2, "Marvell 88e6165 (A2)" },
};
static char *mv88e6123_61_65_probe(struct device *host_dev, int sw_addr)
static char *mv88e6123_probe(struct device *host_dev, int sw_addr)
{
return mv88e6xxx_lookup_name(host_dev, sw_addr, mv88e6123_61_65_table,
ARRAY_SIZE(mv88e6123_61_65_table));
return mv88e6xxx_lookup_name(host_dev, sw_addr, mv88e6123_table,
ARRAY_SIZE(mv88e6123_table));
}
static int mv88e6123_61_65_setup_global(struct dsa_switch *ds)
static int mv88e6123_setup_global(struct dsa_switch *ds)
{
u32 upstream_port = dsa_upstream_port(ds);
int ret;
......@@ -68,7 +68,7 @@ static int mv88e6123_61_65_setup_global(struct dsa_switch *ds)
return 0;
}
static int mv88e6123_61_65_setup(struct dsa_switch *ds)
static int mv88e6123_setup(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
int ret;
......@@ -93,18 +93,18 @@ static int mv88e6123_61_65_setup(struct dsa_switch *ds)
if (ret < 0)
return ret;
ret = mv88e6123_61_65_setup_global(ds);
ret = mv88e6123_setup_global(ds);
if (ret < 0)
return ret;
return mv88e6xxx_setup_ports(ds);
}
struct dsa_switch_driver mv88e6123_61_65_switch_driver = {
struct dsa_switch_driver mv88e6123_switch_driver = {
.tag_protocol = DSA_TAG_PROTO_EDSA,
.priv_size = sizeof(struct mv88e6xxx_priv_state),
.probe = mv88e6123_61_65_probe,
.setup = mv88e6123_61_65_setup,
.probe = mv88e6123_probe,
.setup = mv88e6123_setup,
.set_addr = mv88e6xxx_set_addr_indirect,
.phy_read = mv88e6xxx_phy_read,
.phy_write = mv88e6xxx_phy_write,
......
......@@ -2989,8 +2989,8 @@ static int __init mv88e6xxx_init(void)
#if IS_ENABLED(CONFIG_NET_DSA_MV88E6131)
register_switch_driver(&mv88e6131_switch_driver);
#endif
#if IS_ENABLED(CONFIG_NET_DSA_MV88E6123_61_65)
register_switch_driver(&mv88e6123_61_65_switch_driver);
#if IS_ENABLED(CONFIG_NET_DSA_MV88E6123)
register_switch_driver(&mv88e6123_switch_driver);
#endif
#if IS_ENABLED(CONFIG_NET_DSA_MV88E6352)
register_switch_driver(&mv88e6352_switch_driver);
......@@ -3010,8 +3010,8 @@ static void __exit mv88e6xxx_cleanup(void)
#if IS_ENABLED(CONFIG_NET_DSA_MV88E6352)
unregister_switch_driver(&mv88e6352_switch_driver);
#endif
#if IS_ENABLED(CONFIG_NET_DSA_MV88E6123_61_65)
unregister_switch_driver(&mv88e6123_61_65_switch_driver);
#if IS_ENABLED(CONFIG_NET_DSA_MV88E6123)
unregister_switch_driver(&mv88e6123_switch_driver);
#endif
#if IS_ENABLED(CONFIG_NET_DSA_MV88E6131)
unregister_switch_driver(&mv88e6131_switch_driver);
......
......@@ -519,7 +519,7 @@ int mv88e6xxx_phy_page_write(struct dsa_switch *ds, int port, int page,
int reg, int val);
extern struct dsa_switch_driver mv88e6131_switch_driver;
extern struct dsa_switch_driver mv88e6123_61_65_switch_driver;
extern struct dsa_switch_driver mv88e6123_switch_driver;
extern struct dsa_switch_driver mv88e6352_switch_driver;
extern struct dsa_switch_driver mv88e6171_switch_driver;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment