arm64: dts: qcom: sdm845: switch USB QMP PHY to new style of bindings

Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230824211952.1397699-12-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

arch/arm64/boot/dts/qcom/sdm845.dtsi

@@ -4000,33 +4000,28 @@ usb_1_qmpphy: phy@88e8000 {
 
 		usb_2_qmpphy: phy@88eb000 {
 			compatible = "qcom,sdm845-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x18c>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x088eb000 0 0x1000>;
 
 			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
 				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
-
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
-
-			usb_2_ssphy: phy@88eb200 {
-				reg = <0 0x088eb200 0 0x128>,
-				      <0 0x088eb400 0 0x1fc>,
-				      <0 0x088eb800 0 0x218>,
-				      <0 0x088eb600 0 0x70>;
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+			clock-output-names = "usb3_uni_phy_pipe_clk_src";
 			#clock-cells = <0>;
 			#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
+
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			status = "disabled";
 		};
 
 		usb_1: usb@a6f8800 {
@@ -4126,7 +4121,7 @@ usb_2_dwc3: usb@a800000 {
 				iommus = <&apps_smmu 0x760 0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};