mmc: Use of_property_read_bool() for boolean properties

It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144715.1543836-1-robh@kernel.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/mmci.c

@@ -1962,28 +1962,28 @@ static int mmci_of_parse(struct device_node *np, struct mmc_host *mmc)
 	if (ret)
 		return ret;
 
-	if (of_get_property(np, "st,sig-dir-dat0", NULL))
+	if (of_property_read_bool(np, "st,sig-dir-dat0"))
 		host->pwr_reg_add |= MCI_ST_DATA0DIREN;
-	if (of_get_property(np, "st,sig-dir-dat2", NULL))
+	if (of_property_read_bool(np, "st,sig-dir-dat2"))
 		host->pwr_reg_add |= MCI_ST_DATA2DIREN;
-	if (of_get_property(np, "st,sig-dir-dat31", NULL))
+	if (of_property_read_bool(np, "st,sig-dir-dat31"))
 		host->pwr_reg_add |= MCI_ST_DATA31DIREN;
-	if (of_get_property(np, "st,sig-dir-dat74", NULL))
+	if (of_property_read_bool(np, "st,sig-dir-dat74"))
 		host->pwr_reg_add |= MCI_ST_DATA74DIREN;
-	if (of_get_property(np, "st,sig-dir-cmd", NULL))
+	if (of_property_read_bool(np, "st,sig-dir-cmd"))
 		host->pwr_reg_add |= MCI_ST_CMDDIREN;
-	if (of_get_property(np, "st,sig-pin-fbclk", NULL))
+	if (of_property_read_bool(np, "st,sig-pin-fbclk"))
 		host->pwr_reg_add |= MCI_ST_FBCLKEN;
-	if (of_get_property(np, "st,sig-dir", NULL))
+	if (of_property_read_bool(np, "st,sig-dir"))
 		host->pwr_reg_add |= MCI_STM32_DIRPOL;
-	if (of_get_property(np, "st,neg-edge", NULL))
+	if (of_property_read_bool(np, "st,neg-edge"))
 		host->clk_reg_add |= MCI_STM32_CLK_NEGEDGE;
-	if (of_get_property(np, "st,use-ckin", NULL))
+	if (of_property_read_bool(np, "st,use-ckin"))
 		mmci_probe_level_translator(mmc);
 
-	if (of_get_property(np, "mmc-cap-mmc-highspeed", NULL))
+	if (of_property_read_bool(np, "mmc-cap-mmc-highspeed"))
 		mmc->caps |= MMC_CAP_MMC_HIGHSPEED;
-	if (of_get_property(np, "mmc-cap-sd-highspeed", NULL))
+	if (of_property_read_bool(np, "mmc-cap-sd-highspeed"))
 		mmc->caps |= MMC_CAP_SD_HIGHSPEED;
 
 	return 0;

drivers/mmc/host/omap_hsmmc.c

@@ -1736,18 +1736,18 @@ static struct omap_hsmmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
 	if (legacy && legacy->name)
 		pdata->name = legacy->name;
 
-	if (of_find_property(np, "ti,dual-volt", NULL))
+	if (of_property_read_bool(np, "ti,dual-volt"))
 		pdata->controller_flags |= OMAP_HSMMC_SUPPORTS_DUAL_VOLT;
 
-	if (of_find_property(np, "ti,non-removable", NULL)) {
+	if (of_property_read_bool(np, "ti,non-removable")) {
 		pdata->nonremovable = true;
 		pdata->no_regulator_off_init = true;
 	}
 
-	if (of_find_property(np, "ti,needs-special-reset", NULL))
+	if (of_property_read_bool(np, "ti,needs-special-reset"))
 		pdata->features |= HSMMC_HAS_UPDATED_RESET;
 
-	if (of_find_property(np, "ti,needs-special-hs-handling", NULL))
+	if (of_property_read_bool(np, "ti,needs-special-hs-handling"))
 		pdata->features |= HSMMC_HAS_HSPE_SUPPORT;
 
 	return pdata;

drivers/mmc/host/sdhci-esdhc-imx.c

@@ -1597,7 +1597,7 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
 	struct esdhc_platform_data *boarddata = &imx_data->boarddata;
 	int ret;
 
-	if (of_get_property(np, "fsl,wp-controller", NULL))
+	if (of_property_read_bool(np, "fsl,wp-controller"))
 		boarddata->wp_type = ESDHC_WP_CONTROLLER;
 
 	/*
@@ -1614,7 +1614,7 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
 
 	of_property_read_u32(np, "fsl,strobe-dll-delay-target",
 				&boarddata->strobe_dll_delay_target);
-	if (of_find_property(np, "no-1-8-v", NULL))
+	if (of_property_read_bool(np, "no-1-8-v"))
 		host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
 
 	if (of_property_read_u32(np, "fsl,delay-line", &boarddata->delay_line))

drivers/mmc/host/sdhci-pxav2.c

@@ -228,7 +228,7 @@ static struct sdhci_pxa_platdata *pxav2_get_mmc_pdata(struct device *dev)
 	if (!pdata)
 		return NULL;
 
-	if (of_find_property(np, "non-removable", NULL))
+	if (of_property_read_bool(np, "non-removable"))
 		pdata->flags |= PXA_FLAG_CARD_PERMANENT;
 
 	of_property_read_u32(np, "bus-width", &bus_width);

drivers/mmc/host/sdhci-s3c.c

@@ -437,12 +437,12 @@ static int sdhci_s3c_parse_dt(struct device *dev,
 	pdata->max_width = max_width;
 
 	/* get the card detection method */
-	if (of_get_property(node, "broken-cd", NULL)) {
+	if (of_property_read_bool(node, "broken-cd")) {
 		pdata->cd_type = S3C_SDHCI_CD_NONE;
 		return 0;
 	}
 
-	if (of_get_property(node, "non-removable", NULL)) {
+	if (of_property_read_bool(node, "non-removable")) {
 		pdata->cd_type = S3C_SDHCI_CD_PERMANENT;
 		return 0;
 	}

drivers/mmc/host/tmio_mmc_core.c

@@ -1084,7 +1084,7 @@ static void tmio_mmc_of_parse(struct platform_device *pdev,
 	 * For new platforms, please use "disable-wp" instead of
 	 * "toshiba,mmc-wrprotect-disable"
 	 */
-	if (of_get_property(np, "toshiba,mmc-wrprotect-disable", NULL))
+	if (of_property_read_bool(np, "toshiba,mmc-wrprotect-disable"))
 		mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
 }
 

drivers/mmc/host/wmt-sdmmc.c

@@ -802,10 +802,8 @@ static int wmt_mci_probe(struct platform_device *pdev)
 	priv->power_inverted = 0;
 	priv->cd_inverted = 0;
 
-	if (of_get_property(np, "sdon-inverted", NULL))
-		priv->power_inverted = 1;
-	if (of_get_property(np, "cd-inverted", NULL))
-		priv->cd_inverted = 1;
+	priv->power_inverted = of_property_read_bool(np, "sdon-inverted");
+	priv->cd_inverted = of_property_read_bool(np, "cd-inverted");
 
 	priv->sdmmc_base = of_iomap(np, 0);
 	if (!priv->sdmmc_base) {