Conflict merge of rpcmouse.c and rpckbd.c

drivers/input/keyboard/atkbd.c

@@ -379,15 +379,6 @@ static int atkbd_probe(struct atkbd *atkbd)
 		if (atkbd_command(atkbd, NULL, ATKBD_CMD_RESET_BAT))
 			printk(KERN_WARNING "atkbd.c: keyboard reset failed\n");
 
-/*
- * Next we check we can set LEDs on the keyboard. This should work on every
- * keyboard out there. It also turns the LEDs off, which we want anyway.
- */
-
-	param[0] = 0;
-	if (atkbd_command(atkbd, param, ATKBD_CMD_SETLEDS))
-		return -1;
-
 /*
  * Then we check the keyboard ID. We should get 0xab83 under normal conditions.
  * Some keyboards report different values, but the first byte is always 0xab or
@@ -395,9 +386,19 @@ static int atkbd_probe(struct atkbd *atkbd)
  */
 
 	if (atkbd_command(atkbd, param, ATKBD_CMD_GETID)) {
+
+/*
+ * If the get ID command failed, we check if we can at least set the LEDs on
+ * the keyboard. This should work on every keyboard out there. It also turns
+ * the LEDs off, which we want anyway.
+ */
+		param[0] = 0;
+		if (atkbd_command(atkbd, param, ATKBD_CMD_SETLEDS))
+			return -1;
 		atkbd->id = 0xabba;
 		return 0;
 	}
+
 	if (param[0] != 0xab && param[0] != 0xac)
 		return -1;
 	atkbd->id = param[0] << 8;
@@ -405,6 +406,14 @@ static int atkbd_probe(struct atkbd *atkbd)
 		return -1;
 	atkbd->id |= param[0];
 
+/*
+ * Set the LEDs to a defined state.
+ */
+
+	param[0] = 0;
+	if (atkbd_command(atkbd, param, ATKBD_CMD_SETLEDS))
+		return -1;
+
 /*
  * Disable autorepeat. We don't need it, as we do it in software anyway,
  * because that way can get faster repeat, and have less system load (less

drivers/input/mouse/psmouse.c

@@ -311,6 +311,26 @@ static int psmouse_extensions(struct psmouse *psmouse)
 	if (psmouse_noext)
 		return PSMOUSE_PS2;
 
+/*
+ * Try Synaptics TouchPad magic ID
+ */
+
+       param[0] = 0;
+       psmouse_command(psmouse, param, PSMOUSE_CMD_SETRES);
+       psmouse_command(psmouse, param, PSMOUSE_CMD_SETRES);
+       psmouse_command(psmouse, param, PSMOUSE_CMD_SETRES);
+       psmouse_command(psmouse, param, PSMOUSE_CMD_SETRES);
+       psmouse_command(psmouse, param, PSMOUSE_CMD_GETINFO);
+
+       if (param[1] == 0x47) {
+               /* We could do more here. But it's sufficient just
+                  to stop the subsequent probes from screwing the
+                  thing up. */
+               psmouse->vendor = "Synaptics";
+               psmouse->name = "TouchPad";
+               return PSMOUSE_PS2;
+       }
+
 /*
  * Try Genius NetMouse magic init.
  */
@@ -348,7 +368,7 @@ static int psmouse_extensions(struct psmouse *psmouse)
 
 		int i;
 		static int logitech_4btn[] = { 12, 40, 41, 42, 43, 52, 73, 80, -1 };
-		static int logitech_wheel[] = { 52, 75, 76, 80, 81, 83, 88, -1 };
+		static int logitech_wheel[] = { 52, 53, 75, 76, 80, 81, 83, 88, -1 };
 		static int logitech_ps2pp[] = { 12, 13, 40, 41, 42, 43, 50, 51, 52, 53, 73, 75,
 							76, 80, 81, 83, 88, 96, 97, -1 };
 		psmouse->vendor = "Logitech";

drivers/input/mouse/rpcmouse.c

@@ -34,6 +34,7 @@ MODULE_DESCRIPTION("Acorn RiscPC mouse driver");
 MODULE_LICENSE("GPL");
 
 static short rpcmouse_lastx, rpcmouse_lasty;
+static unsigned int rpcmouse_lastb;
 
 static struct input_dev rpcmouse_dev = {
 	.evbit	= { BIT(EV_KEY) | BIT(EV_REL) },
@@ -52,11 +53,12 @@ static struct input_dev rpcmouse_dev = {
 static void rpcmouse_irq(int irq, void *dev_id, struct pt_regs *regs)
 {
 	struct input_dev *dev = dev_id;
-	short x, y, dx, dy, b;
+	short x, y, dx, dy;
+	unsigned int b;
 
 	x = (short) iomd_readl(IOMD_MOUSEX);
 	y = (short) iomd_readl(IOMD_MOUSEY);
-	b = (short) (__raw_readl(0xe0310000) ^ 0x70);
+	b = (short) (__raw_readl(0xe0310000) >> 4) & 7;
 
 	dx = x - rpcmouse_lastx;
 	dy = y - rpcmouse_lasty; 
@@ -64,14 +66,21 @@ static void rpcmouse_irq(int irq, void *dev_id, struct pt_regs *regs)
 	rpcmouse_lastx = x;
 	rpcmouse_lasty = y;
 
+	if (dx)
 		input_report_rel(dev, REL_X, dx);
+	if (dy)
 		input_report_rel(dev, REL_Y, -dy);
 
+	b = __raw_readl(0xe0310000) ^ 0x70;
+	if (b != rpcmouse_lastb) {
 		input_report_key(dev, BTN_LEFT,   b & 0x40);
 		input_report_key(dev, BTN_MIDDLE, b & 0x20);
 		input_report_key(dev, BTN_RIGHT,  b & 0x10);
-
+	}
+	if (b != rpcmouse_lastb || dx || dy)
 		input_sync(dev);
+
+	rpcmouse_lastb = b;
 }
 
 static int __init rpcmouse_init(void)

drivers/input/serio/rpckbd.c

@@ -4,7 +4,7 @@
  *  Copyright (c) 2000-2001 Vojtech Pavlik
  *
  *  Based on the work of:
- *	Russell King
+ *	Russell King (thanks)
  *
  * Fixes by Russell King.
  */
@@ -85,12 +85,12 @@ static int rpckbd_open(struct serio *port)
 	iomd_readb(IOMD_KARTRX);
 
 	if (request_irq(IRQ_KEYBOARDRX, rpckbd_rx, 0, "rpckbd", port) != 0) {
-		printk(KERN_ERR "rpckbd.c: Could not allocate keyboard receive IRQ\n");
+		printk(KERN_ERR "rpckbd.c: Could not allocate keyboard receive IRQ!\n");
 		return -EBUSY;
 	}
 
 	if (request_irq(IRQ_KEYBOARDTX, rpckbd_tx, 0, "rpckbd", port) != 0) {
-		printk(KERN_ERR "rpckbd.c: Could not allocate keyboard transmit IRQ\n");
+		printk(KERN_ERR "rpckbd.c: Could not allocate keyboard transmit IRQ!\n");
 		free_irq(IRQ_KEYBOARDRX, NULL);
 		return -EBUSY;
 	}

drivers/input/serio/serio.c

@@ -115,7 +115,7 @@ static int serio_thread(void *nothing)
 			refrigerator(PF_IOTHREAD);
 	} while (!signal_pending(current));
 
-	printk(KERN_DEBUG "serio: kseriod exiting");
+	printk(KERN_DEBUG "serio: kseriod exiting\n");
 
 	unlock_kernel();
 	complete_and_exit(&serio_exited, 0);
@@ -140,6 +140,7 @@ void serio_interrupt(struct serio *serio, unsigned char data, unsigned int flags
         if (serio->dev && serio->dev->interrupt) 
                 serio->dev->interrupt(serio, data, flags);
 	else 
+		if (!flags)
 			serio_rescan(serio);
 }
 

drivers/usb/input/hid-input.c

@@ -348,7 +348,7 @@ static void hidinput_configure_usage(struct hid_device *device, struct hid_field
 	set_bit(usage->type, input->evbit);
 
 	while (usage->code <= max && test_and_set_bit(usage->code, bit)) {
-		usage->code = find_next_zero_bit(bit, usage->code, max + 1);
+		usage->code = find_next_zero_bit(bit, max + 1, usage->code);
 	}
 
 	if (usage->code > max) return;

drivers/usb/input/usbkbd.c

@@ -180,8 +180,10 @@ static int usb_kbd_open(struct input_dev *dev)
 		return 0;
 
 	kbd->irq->dev = kbd->usbdev;
-	if (usb_submit_urb(kbd->irq, GFP_KERNEL))
+	if (usb_submit_urb(kbd->irq, GFP_KERNEL)) {
+		kbd->open--;
 		return -EIO;
+	}
 
 	return 0;
 }

drivers/usb/input/usbmouse.c

@@ -104,8 +104,10 @@ static int usb_mouse_open(struct input_dev *dev)
 		return 0;
 
 	mouse->irq->dev = mouse->usbdev;
-	if (usb_submit_urb(mouse->irq, GFP_KERNEL))
+	if (usb_submit_urb(mouse->irq, GFP_KERNEL)) {
+		mouse->open--;
 		return -EIO;
+	}
 
 	return 0;
 }

include/linux/logibusmouse.h

-#ifndef _LINUX_BUSMOUSE_H
-#define _LINUX_BUSMOUSE_H
-
-/*
- * linux/include/linux/busmouse.h: header file for Logitech Bus Mouse driver
- * by James Banks
- *
- * based on information gleamed from various mouse drivers on the net
- *
- * Heavily modified by David giller (rafetmad@oxy.edu)
- *
- * Minor modifications for Linux 0.96c-pl1 by Nathan Laredo
- * gt7080a@prism.gatech.edu (13JUL92)
- *
- * Microsoft BusMouse support by Teemu Rantanen (tvr@cs.hut.fi) (02AUG92)
- *
- * Microsoft Bus Mouse support modified by Derrick Cole (cole@concert.net)
- *    8/28/92
- *
- * Microsoft Bus Mouse support folded into 0.97pl4 code
- *    by Peter Cervasio (pete%q106fm.uucp@wupost.wustl.edu) (08SEP92)
- * Changes:  Logitech and Microsoft support in the same kernel.
- *           Defined new constants in busmouse.h for MS mice.
- *           Added int mse_busmouse_type to distinguish busmouse types
- *           Added a couple of new functions to handle differences in using
- *             MS vs. Logitech (where the int variable wasn't appropriate).
- *
- */
-
-#define MOUSE_IRQ		5
-#define LOGITECH_BUSMOUSE       0   /* Minor device # for Logitech  */
-#define MICROSOFT_BUSMOUSE      2   /* Minor device # for Microsoft */
-
-/*--------- LOGITECH BUSMOUSE ITEMS -------------*/
-
-#define	LOGIBM_BASE		0x23c
-#define	MSE_DATA_PORT		0x23c
-#define	MSE_SIGNATURE_PORT	0x23d
-#define	MSE_CONTROL_PORT	0x23e
-#define	MSE_INTERRUPT_PORT	0x23e
-#define	MSE_CONFIG_PORT		0x23f
-#define	LOGIBM_EXTENT		0x4
-
-#define	MSE_ENABLE_INTERRUPTS	0x00
-#define	MSE_DISABLE_INTERRUPTS	0x10
-
-#define	MSE_READ_X_LOW		0x80
-#define	MSE_READ_X_HIGH		0xa0
-#define	MSE_READ_Y_LOW		0xc0
-#define	MSE_READ_Y_HIGH		0xe0
-
-/* Magic number used to check if the mouse exists */
-#define MSE_CONFIG_BYTE		0x91
-#define MSE_DEFAULT_MODE	0x90
-#define MSE_SIGNATURE_BYTE	0xa5
-
-/* useful Logitech Mouse macros */
-
-#define MSE_INT_OFF()	outb(MSE_DISABLE_INTERRUPTS, MSE_CONTROL_PORT)
-#define MSE_INT_ON()	outb(MSE_ENABLE_INTERRUPTS, MSE_CONTROL_PORT)
-
-/*--------- MICROSOFT BUSMOUSE ITEMS -------------*/
-
-#define	MSBM_BASE			0x23d
-#define	MS_MSE_DATA_PORT	        0x23d
-#define	MS_MSE_SIGNATURE_PORT	        0x23e
-#define	MS_MSE_CONTROL_PORT	        0x23c
-#define	MS_MSE_CONFIG_PORT		0x23f
-#define	MSBM_EXTENT			0x3
-
-#define	MS_MSE_ENABLE_INTERRUPTS	0x11
-#define	MS_MSE_DISABLE_INTERRUPTS	0x10
-
-#define	MS_MSE_READ_BUTTONS             0x00
-#define	MS_MSE_READ_X		        0x01
-#define	MS_MSE_READ_Y                   0x02
-
-#define MS_MSE_START                    0x80
-#define MS_MSE_COMMAND_MODE             0x07
-
-/* useful microsoft busmouse macros */
-
-#define MS_MSE_INT_OFF() {outb(MS_MSE_COMMAND_MODE, MS_MSE_CONTROL_PORT); \
-			    outb(MS_MSE_DISABLE_INTERRUPTS, MS_MSE_DATA_PORT);}
-#define MS_MSE_INT_ON()  {outb(MS_MSE_COMMAND_MODE, MS_MSE_CONTROL_PORT); \
-			    outb(MS_MSE_ENABLE_INTERRUPTS, MS_MSE_DATA_PORT);}
-
- 
-struct mouse_status {
-	unsigned char	buttons;
-	unsigned char	latch_buttons;
-	int		dx;
-	int		dy;	
-	int 		present;
-	int		ready;
-	int		active;
-	wait_queue_head_t wait;
-	struct fasync_struct *fasyncptr;
-};
-
-/* Function Prototypes */
-
-#endif
-