phy: qcom-qmp-combo: drop unused in-layout configuration

The QMP combo PHY driver does not use the "in-layout" configuration
macro to configure registers that are typically accessed using
"regs_layout" arrays (e.g. QPHY_START_CTRL) so drop this unused
feature.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221012081241.18273-4-johan+linaro@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

drivers/phy/qualcomm/phy-qcom-qmp-combo.c

@@ -69,11 +69,6 @@
 struct qmp_phy_init_tbl {
 	unsigned int offset;
 	unsigned int val;
-	/*
-	 * register part of layout ?
-	 * if yes, then offset gives index in the reg-layout
-	 */
-	bool in_layout;
 	/*
 	 * mask of lanes for which this register is written
 	 * for cases when second lane needs different values
@@ -88,14 +83,6 @@ struct qmp_phy_init_tbl {
 		.lane_mask = 0xff,	\
 	}
 
-#define QMP_PHY_INIT_CFG_L(o, v)	\
-	{				\
-		.offset = o,		\
-		.val = v,		\
-		.in_layout = true,	\
-		.lane_mask = 0xff,	\
-	}
-
 #define QMP_PHY_INIT_CFG_LANE(o, v, l)	\
 	{				\
 		.offset = o,		\
@@ -1346,7 +1333,6 @@ static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = {
 };
 
 static void qmp_combo_configure_lane(void __iomem *base,
-					const unsigned int *regs,
 					const struct qmp_phy_init_tbl tbl[],
 					int num,
 					u8 lane_mask)
@@ -1361,19 +1347,15 @@ static void qmp_combo_configure_lane(void __iomem *base,
 		if (!(t->lane_mask & lane_mask))
 			continue;
 
-		if (t->in_layout)
-			writel(t->val, base + regs[t->offset]);
-		else
 		writel(t->val, base + t->offset);
 	}
 }
 
 static void qmp_combo_configure(void __iomem *base,
-				   const unsigned int *regs,
 				   const struct qmp_phy_init_tbl tbl[],
 				   int num)
 {
-	qmp_combo_configure_lane(base, regs, tbl, num, 0xff);
+	qmp_combo_configure_lane(base, tbl, num, 0xff);
 }
 
 static int qmp_combo_serdes_init(struct qmp_phy *qphy)
@@ -1384,28 +1366,24 @@ static int qmp_combo_serdes_init(struct qmp_phy *qphy)
 	const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl;
 	int serdes_tbl_num = cfg->serdes_tbl_num;
 
-	qmp_combo_configure(serdes, cfg->regs, serdes_tbl, serdes_tbl_num);
+	qmp_combo_configure(serdes, serdes_tbl, serdes_tbl_num);
 
 	if (cfg->type == PHY_TYPE_DP) {
 		switch (dp_opts->link_rate) {
 		case 1620:
-			qmp_combo_configure(serdes, cfg->regs,
-					       cfg->serdes_tbl_rbr,
+			qmp_combo_configure(serdes, cfg->serdes_tbl_rbr,
 					       cfg->serdes_tbl_rbr_num);
 			break;
 		case 2700:
-			qmp_combo_configure(serdes, cfg->regs,
-					       cfg->serdes_tbl_hbr,
+			qmp_combo_configure(serdes, cfg->serdes_tbl_hbr,
 					       cfg->serdes_tbl_hbr_num);
 			break;
 		case 5400:
-			qmp_combo_configure(serdes, cfg->regs,
-					       cfg->serdes_tbl_hbr2,
+			qmp_combo_configure(serdes, cfg->serdes_tbl_hbr2,
 					       cfg->serdes_tbl_hbr2_num);
 			break;
 		case 8100:
-			qmp_combo_configure(serdes, cfg->regs,
-					       cfg->serdes_tbl_hbr3,
+			qmp_combo_configure(serdes, cfg->serdes_tbl_hbr3,
 					       cfg->serdes_tbl_hbr3_num);
 			break;
 		default:
@@ -2069,29 +2047,25 @@ static int qmp_combo_power_on(struct phy *phy)
 	}
 
 	/* Tx, Rx, and PCS configurations */
-	qmp_combo_configure_lane(tx, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num, 1);
+	qmp_combo_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
 
-	if (cfg->lanes >= 2) {
-		qmp_combo_configure_lane(qphy->tx2, cfg->regs, cfg->tx_tbl,
-					 cfg->tx_tbl_num, 2);
-	}
+	if (cfg->lanes >= 2)
+		qmp_combo_configure_lane(qphy->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
 
 	/* Configure special DP tx tunings */
 	if (cfg->type == PHY_TYPE_DP)
 		cfg->configure_dp_tx(qphy);
 
-	qmp_combo_configure_lane(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num, 1);
+	qmp_combo_configure_lane(rx, cfg->rx_tbl, cfg->rx_tbl_num, 1);
 
-	if (cfg->lanes >= 2) {
-		qmp_combo_configure_lane(qphy->rx2, cfg->regs, cfg->rx_tbl,
-					 cfg->rx_tbl_num, 2);
-	}
+	if (cfg->lanes >= 2)
+		qmp_combo_configure_lane(qphy->rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2);
 
 	/* Configure link rate, swing, etc. */
 	if (cfg->type == PHY_TYPE_DP)
 		cfg->configure_dp_phy(qphy);
 	else
-		qmp_combo_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
+		qmp_combo_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
 
 	if (cfg->has_pwrdn_delay)
 		usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);