ARM: at91: add EMAC bindings to RM9200 DT

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

arch/arm/boot/dts/at91rm9200.dtsi

@@ -127,6 +127,16 @@ ssc2: ssc@fffd8000 {
 				status = "disable";
 			};
 
+			macb0: ethernet@fffbc000 {
+				compatible = "cdns,at91rm9200-emac", "cdns,emac";
+				reg = <0xfffbc000 0x4000>;
+				interrupts = <24 4 3>;
+				phy-mode = "rmii";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb_rmii>;
+				status = "disabled";
+			};
+
 			pinctrl@fffff400 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -246,6 +256,34 @@ pinctrl_nand: nand-0 {
 					};
 				};
 
+				macb {
+					pinctrl_macb_rmii: macb_rmii-0 {
+						atmel,pins =
+							<0 7 0x1 0x0	/* PA7 periph A */
+							 0 8 0x1 0x0	/* PA8 periph A */
+							 0 9 0x1 0x0	/* PA9 periph A */
+							 0 10 0x1 0x0	/* PA10 periph A */
+							 0 11 0x1 0x0	/* PA11 periph A */
+							 0 12 0x1 0x0	/* PA12 periph A */
+							 0 13 0x1 0x0	/* PA13 periph A */
+							 0 14 0x1 0x0	/* PA14 periph A */
+							 0 15 0x1 0x0	/* PA15 periph A */
+							 0 16 0x1 0x0>;	/* PA16 periph A */
+					};
+
+					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+						atmel,pins =
+							<1 12 0x2 0x0	/* PB12 periph B */
+							 1 13 0x2 0x0	/* PB13 periph B */
+							 1 14 0x2 0x0	/* PB14 periph B */
+							 1 15 0x2 0x0	/* PB15 periph B */
+							 1 16 0x2 0x0	/* PB16 periph B */
+							 1 17 0x2 0x0	/* PB17 periph B */
+							 1 18 0x2 0x0	/* PB18 periph B */
+							 1 19 0x2 0x0>;	/* PB19 periph B */
+					};
+				};
+
 				mmc0 {
 					pinctrl_mmc0_clk: mmc0_clk-0 {
 						atmel,pins =

arch/arm/boot/dts/at91rm9200ek.dts

@@ -44,6 +44,11 @@ &pinctrl_uart1_dcd
 				status = "okay";
 			};
 
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
 			usb1: gadget@fffb0000 {
 				atmel,vbus-gpio = <&pioD 4 0>;
 				status = "okay";

arch/arm/mach-at91/at91rm9200.c

@@ -211,6 +211,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t1_clk", "fffa4000.timer", &tc4_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "fffa4000.timer", &tc5_clk),
 	CLKDEV_CON_DEV_ID("mci_clk", "fffb4000.mmc", &mmc_clk),
+	CLKDEV_CON_DEV_ID("emac_clk", "fffbc000.ethernet", &ether_clk),
 	CLKDEV_CON_DEV_ID("hclk", "300000.ohci", &ohci_clk),
 	CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
 	CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),