Merge tag 'topic/crc-pmic-2015-07-23' of git://anongit.freedesktop.org/drm-intel into drm-next

crystalcove pmic support from Shobhit. Patch series has all acks/r-bs from
other mainainers so ok to pull into drm-next. But I'm cc'ing all other
maintainers as fyi and in case they want to pull it into their trees too
to avoid conflicts.

* tag 'topic/crc-pmic-2015-07-23' of git://anongit.freedesktop.org/drm-intel:
  mfd: Add GPIOLIB dependency if INTEL_SOC_PMIC is to be enabled
  drm/i915: Backlight control using CRC PMIC based PWM driver
  drm/i915: Use the CRC gpio for panel enable/disable
  pwm: crc: Add Crystalcove (CRC) PWM driver
  mfd: intel_soc_pmic_core: ADD PWM lookup table for CRC PMIC based PWM
  mfd: intel_soc_pmic_crc: Add PWM cell device for Crystalcove PMIC
  mfd: intel_soc_pmic_core: Add lookup table for Panel Control as GPIO signal
  gpiolib: Add support for removing registered consumer lookup table

drivers/gpio/gpiolib.c

@@ -1672,6 +1672,19 @@ void gpiod_add_lookup_table(struct gpiod_lookup_table *table)
 	mutex_unlock(&gpio_lookup_lock);
 }
 
+/**
+ * gpiod_remove_lookup_table() - unregister GPIO device consumers
+ * @table: table of consumers to unregister
+ */
+void gpiod_remove_lookup_table(struct gpiod_lookup_table *table)
+{
+	mutex_lock(&gpio_lookup_lock);
+
+	list_del(&table->list);
+
+	mutex_unlock(&gpio_lookup_lock);
+}
+
 static struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
 				      unsigned int idx,
 				      enum gpio_lookup_flags *flags)

drivers/gpu/drm/i915/intel_bios.h

@@ -778,6 +778,13 @@ int intel_parse_bios(struct drm_device *dev);
 #define MIPI_DSI_UNDEFINED_PANEL_ID	0
 #define MIPI_DSI_GENERIC_PANEL_ID	1
 
+/*
+ * PMIC vs SoC Backlight support specified in pwm_blc
+ * field in mipi_config block below.
+*/
+#define PPS_BLC_PMIC   0
+#define PPS_BLC_SOC    1
+
 struct mipi_config {
 	u16 panel_id;
 

drivers/gpu/drm/i915/intel_drv.h

@@ -177,6 +177,10 @@ struct intel_panel {
 		bool enabled;
 		bool combination_mode;	/* gen 2/4 only */
 		bool active_low_pwm;
+
+		/* PWM chip */
+		struct pwm_device *pwm;
+
 		struct backlight_device *device;
 	} backlight;
 

drivers/gpu/drm/i915/intel_dsi.c

@@ -31,6 +31,7 @@
 #include <drm/drm_panel.h>
 #include <drm/drm_mipi_dsi.h>
 #include <linux/slab.h>
+#include <linux/gpio/consumer.h>
 #include "i915_drv.h"
 #include "intel_drv.h"
 #include "intel_dsi.h"
@@ -396,6 +397,8 @@ static void intel_dsi_enable(struct intel_encoder *encoder)
 
 		intel_dsi_port_enable(encoder);
 	}
+
+	intel_panel_enable_backlight(intel_dsi->attached_connector);
 }
 
 static void intel_dsi_pre_enable(struct intel_encoder *encoder)
@@ -410,6 +413,12 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder)
 
 	DRM_DEBUG_KMS("\n");
 
+	/* Panel Enable over CRC PMIC */
+	if (intel_dsi->gpio_panel)
+		gpiod_set_value_cansleep(intel_dsi->gpio_panel, 1);
+
+	msleep(intel_dsi->panel_on_delay);
+
 	/* Disable DPOunit clock gating, can stall pipe
 	 * and we need DPLL REFA always enabled */
 	tmp = I915_READ(DPLL(pipe));
@@ -427,8 +436,6 @@ static void intel_dsi_pre_enable(struct intel_encoder *encoder)
 	/* put device in ready state */
 	intel_dsi_device_ready(encoder);
 
-	msleep(intel_dsi->panel_on_delay);
-
 	drm_panel_prepare(intel_dsi->panel);
 
 	for_each_dsi_port(port, intel_dsi->ports)
@@ -456,6 +463,8 @@ static void intel_dsi_pre_disable(struct intel_encoder *encoder)
 
 	DRM_DEBUG_KMS("\n");
 
+	intel_panel_disable_backlight(intel_dsi->attached_connector);
+
 	if (is_vid_mode(intel_dsi)) {
 		/* Send Shutdown command to the panel in LP mode */
 		for_each_dsi_port(port, intel_dsi->ports)
@@ -571,6 +580,10 @@ static void intel_dsi_post_disable(struct intel_encoder *encoder)
 
 	msleep(intel_dsi->panel_off_delay);
 	msleep(intel_dsi->panel_pwr_cycle_delay);
+
+	/* Panel Disable over CRC PMIC */
+	if (intel_dsi->gpio_panel)
+		gpiod_set_value_cansleep(intel_dsi->gpio_panel, 0);
 }
 
 static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
@@ -950,6 +963,11 @@ static void intel_dsi_encoder_destroy(struct drm_encoder *encoder)
 		/* XXX: Logically this call belongs in the panel driver. */
 		drm_panel_remove(intel_dsi->panel);
 	}
+
+	/* dispose of the gpios */
+	if (intel_dsi->gpio_panel)
+		gpiod_put(intel_dsi->gpio_panel);
+
 	intel_encoder_destroy(encoder);
 }
 
@@ -1065,6 +1083,20 @@ void intel_dsi_init(struct drm_device *dev)
 		goto err;
 	}
 
+	/*
+	 * In case of BYT with CRC PMIC, we need to use GPIO for
+	 * Panel control.
+	 */
+	if (dev_priv->vbt.dsi.config->pwm_blc == PPS_BLC_PMIC) {
+		intel_dsi->gpio_panel =
+			gpiod_get(dev->dev, "panel", GPIOD_OUT_HIGH);
+
+		if (IS_ERR(intel_dsi->gpio_panel)) {
+			DRM_ERROR("Failed to own gpio for panel control\n");
+			intel_dsi->gpio_panel = NULL;
+		}
+	}
+
 	intel_encoder->type = INTEL_OUTPUT_DSI;
 	intel_encoder->cloneable = 0;
 	drm_connector_init(dev, connector, &intel_dsi_connector_funcs,
@@ -1098,6 +1130,7 @@ void intel_dsi_init(struct drm_device *dev)
 	}
 
 	intel_panel_init(&intel_connector->panel, fixed_mode, NULL);
+	intel_panel_setup_backlight(connector, INVALID_PIPE);
 
 	return;
 

drivers/gpu/drm/i915/intel_dsi.h

@@ -42,6 +42,9 @@ struct intel_dsi {
 	struct drm_panel *panel;
 	struct intel_dsi_host *dsi_hosts[I915_MAX_PORTS];
 
+	/* GPIO Desc for CRC based Panel control */
+	struct gpio_desc *gpio_panel;
+
 	struct intel_connector *attached_connector;
 
 	/* bit mask of ports being driven */

drivers/gpu/drm/i915/intel_panel.c

@@ -32,8 +32,11 @@
 
 #include <linux/kernel.h>
 #include <linux/moduleparam.h>
+#include <linux/pwm.h>
 #include "intel_drv.h"
 
+#define CRC_PMIC_PWM_PERIOD_NS	21333
+
 void
 intel_fixed_panel_mode(const struct drm_display_mode *fixed_mode,
 		       struct drm_display_mode *adjusted_mode)
@@ -544,6 +547,15 @@ static u32 bxt_get_backlight(struct intel_connector *connector)
 	return I915_READ(BXT_BLC_PWM_DUTY1);
 }
 
+static u32 pwm_get_backlight(struct intel_connector *connector)
+{
+	struct intel_panel *panel = &connector->panel;
+	int duty_ns;
+
+	duty_ns = pwm_get_duty_cycle(panel->backlight.pwm);
+	return DIV_ROUND_UP(duty_ns * 100, CRC_PMIC_PWM_PERIOD_NS);
+}
+
 static u32 intel_panel_get_backlight(struct intel_connector *connector)
 {
 	struct drm_device *dev = connector->base.dev;
@@ -632,6 +644,14 @@ static void bxt_set_backlight(struct intel_connector *connector, u32 level)
 	I915_WRITE(BXT_BLC_PWM_DUTY1, level);
 }
 
+static void pwm_set_backlight(struct intel_connector *connector, u32 level)
+{
+	struct intel_panel *panel = &connector->panel;
+	int duty_ns = DIV_ROUND_UP(level * CRC_PMIC_PWM_PERIOD_NS, 100);
+
+	pwm_config(panel->backlight.pwm, duty_ns, CRC_PMIC_PWM_PERIOD_NS);
+}
+
 static void
 intel_panel_actually_set_backlight(struct intel_connector *connector, u32 level)
 {
@@ -769,6 +789,16 @@ static void bxt_disable_backlight(struct intel_connector *connector)
 	I915_WRITE(BXT_BLC_PWM_CTL1, tmp & ~BXT_BLC_PWM_ENABLE);
 }
 
+static void pwm_disable_backlight(struct intel_connector *connector)
+{
+	struct intel_panel *panel = &connector->panel;
+
+	/* Disable the backlight */
+	pwm_config(panel->backlight.pwm, 0, CRC_PMIC_PWM_PERIOD_NS);
+	usleep_range(2000, 3000);
+	pwm_disable(panel->backlight.pwm);
+}
+
 void intel_panel_disable_backlight(struct intel_connector *connector)
 {
 	struct drm_device *dev = connector->base.dev;
@@ -1010,6 +1040,14 @@ static void bxt_enable_backlight(struct intel_connector *connector)
 	I915_WRITE(BXT_BLC_PWM_CTL1, pwm_ctl | BXT_BLC_PWM_ENABLE);
 }
 
+static void pwm_enable_backlight(struct intel_connector *connector)
+{
+	struct intel_panel *panel = &connector->panel;
+
+	pwm_enable(panel->backlight.pwm);
+	intel_panel_actually_set_backlight(connector, panel->backlight.level);
+}
+
 void intel_panel_enable_backlight(struct intel_connector *connector)
 {
 	struct drm_device *dev = connector->base.dev;
@@ -1386,6 +1424,40 @@ bxt_setup_backlight(struct intel_connector *connector, enum pipe unused)
 	return 0;
 }
 
+static int pwm_setup_backlight(struct intel_connector *connector,
+			       enum pipe pipe)
+{
+	struct drm_device *dev = connector->base.dev;
+	struct intel_panel *panel = &connector->panel;
+	int retval;
+
+	/* Get the PWM chip for backlight control */
+	panel->backlight.pwm = pwm_get(dev->dev, "pwm_backlight");
+	if (IS_ERR(panel->backlight.pwm)) {
+		DRM_ERROR("Failed to own the pwm chip\n");
+		panel->backlight.pwm = NULL;
+		return -ENODEV;
+	}
+
+	retval = pwm_config(panel->backlight.pwm, CRC_PMIC_PWM_PERIOD_NS,
+			    CRC_PMIC_PWM_PERIOD_NS);
+	if (retval < 0) {
+		DRM_ERROR("Failed to configure the pwm chip\n");
+		pwm_put(panel->backlight.pwm);
+		panel->backlight.pwm = NULL;
+		return retval;
+	}
+
+	panel->backlight.min = 0; /* 0% */
+	panel->backlight.max = 100; /* 100% */
+	panel->backlight.level = DIV_ROUND_UP(
+				 pwm_get_duty_cycle(panel->backlight.pwm) * 100,
+				 CRC_PMIC_PWM_PERIOD_NS);
+	panel->backlight.enabled = panel->backlight.level != 0;
+
+	return 0;
+}
+
 int intel_panel_setup_backlight(struct drm_connector *connector, enum pipe pipe)
 {
 	struct drm_device *dev = connector->dev;
@@ -1429,6 +1501,10 @@ void intel_panel_destroy_backlight(struct drm_connector *connector)
 	struct intel_connector *intel_connector = to_intel_connector(connector);
 	struct intel_panel *panel = &intel_connector->panel;
 
+	/* dispose of the pwm */
+	if (panel->backlight.pwm)
+		pwm_put(panel->backlight.pwm);
+
 	panel->backlight.present = false;
 }
 
@@ -1456,11 +1532,19 @@ void intel_panel_init_backlight_funcs(struct drm_device *dev)
 		dev_priv->display.set_backlight = pch_set_backlight;
 		dev_priv->display.get_backlight = pch_get_backlight;
 	} else if (IS_VALLEYVIEW(dev)) {
+		if (dev_priv->vbt.has_mipi) {
+			dev_priv->display.setup_backlight = pwm_setup_backlight;
+			dev_priv->display.enable_backlight = pwm_enable_backlight;
+			dev_priv->display.disable_backlight = pwm_disable_backlight;
+			dev_priv->display.set_backlight = pwm_set_backlight;
+			dev_priv->display.get_backlight = pwm_get_backlight;
+		} else {
 			dev_priv->display.setup_backlight = vlv_setup_backlight;
 			dev_priv->display.enable_backlight = vlv_enable_backlight;
 			dev_priv->display.disable_backlight = vlv_disable_backlight;
 			dev_priv->display.set_backlight = vlv_set_backlight;
 			dev_priv->display.get_backlight = vlv_get_backlight;
+		}
 	} else if (IS_GEN4(dev)) {
 		dev_priv->display.setup_backlight = i965_setup_backlight;
 		dev_priv->display.enable_backlight = i965_enable_backlight;

drivers/mfd/Kconfig

@@ -318,6 +318,7 @@ config LPC_SCH
 
 config INTEL_SOC_PMIC
 	bool "Support for Intel Atom SoC PMIC"
+	depends on GPIOLIB
 	depends on I2C=y
 	select MFD_CORE
 	select REGMAP_I2C

drivers/mfd/intel_soc_pmic_core.c

@@ -24,8 +24,25 @@
 #include <linux/acpi.h>
 #include <linux/regmap.h>
 #include <linux/mfd/intel_soc_pmic.h>
+#include <linux/gpio/machine.h>
+#include <linux/pwm.h>
 #include "intel_soc_pmic_core.h"
 
+/* Lookup table for the Panel Enable/Disable line as GPIO signals */
+static struct gpiod_lookup_table panel_gpio_table = {
+	/* Intel GFX is consumer */
+	.dev_id = "0000:00:02.0",
+	.table = {
+		/* Panel EN/DISABLE */
+		GPIO_LOOKUP("gpio_crystalcove", 94, "panel", GPIO_ACTIVE_HIGH),
+	},
+};
+
+/* PWM consumed by the Intel GFX */
+static struct pwm_lookup crc_pwm_lookup[] = {
+	PWM_LOOKUP("crystal_cove_pwm", 0, "0000:00:02.0", "pwm_backlight", 0, PWM_POLARITY_NORMAL),
+};
+
 static int intel_soc_pmic_find_gpio_irq(struct device *dev)
 {
 	struct gpio_desc *desc;
@@ -85,6 +102,12 @@ static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c,
 	if (ret)
 		dev_warn(dev, "Can't enable IRQ as wake source: %d\n", ret);
 
+	/* Add lookup table binding for Panel Control to the GPIO Chip */
+	gpiod_add_lookup_table(&panel_gpio_table);
+
+	/* Add lookup table for crc-pwm */
+	pwm_add_table(crc_pwm_lookup, ARRAY_SIZE(crc_pwm_lookup));
+
 	ret = mfd_add_devices(dev, -1, config->cell_dev,
 			      config->n_cell_devs, NULL, 0,
 			      regmap_irq_get_domain(pmic->irq_chip_data));
@@ -104,6 +127,12 @@ static int intel_soc_pmic_i2c_remove(struct i2c_client *i2c)
 
 	regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data);
 
+	/* Remove lookup table for Panel Control from the GPIO Chip */
+	gpiod_remove_lookup_table(&panel_gpio_table);
+
+	/* remove crc-pwm lookup table */
+	pwm_remove_table(crc_pwm_lookup, ARRAY_SIZE(crc_pwm_lookup));
+
 	mfd_remove_devices(&i2c->dev);
 
 	return 0;

drivers/mfd/intel_soc_pmic_crc.c

@@ -109,6 +109,9 @@ static struct mfd_cell crystal_cove_dev[] = {
 	{
 		.name = "crystal_cove_pmic",
 	},
+	{
+		.name = "crystal_cove_pwm",
+	},
 };
 
 static const struct regmap_config crystal_cove_regmap_config = {

drivers/pwm/Kconfig

@@ -111,6 +111,13 @@ config PWM_CLPS711X
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-clps711x.
 
+config PWM_CRC
+	bool "Intel Crystalcove (CRC) PWM support"
+	depends on X86 && INTEL_SOC_PMIC
+	help
+	  Generic PWM framework driver for Crystalcove (CRC) PMIC based PWM
+	  control.
+
 config PWM_EP93XX
 	tristate "Cirrus Logic EP93xx PWM support"
 	depends on ARCH_EP93XX

drivers/pwm/Makefile

@@ -8,6 +8,7 @@ obj-$(CONFIG_PWM_BCM_KONA)	+= pwm-bcm-kona.o
 obj-$(CONFIG_PWM_BCM2835)	+= pwm-bcm2835.o
 obj-$(CONFIG_PWM_BFIN)		+= pwm-bfin.o
 obj-$(CONFIG_PWM_CLPS711X)	+= pwm-clps711x.o
+obj-$(CONFIG_PWM_CRC)		+= pwm-crc.o
 obj-$(CONFIG_PWM_EP93XX)	+= pwm-ep93xx.o
 obj-$(CONFIG_PWM_FSL_FTM)	+= pwm-fsl-ftm.o
 obj-$(CONFIG_PWM_IMG)		+= pwm-img.o

drivers/pwm/pwm-crc.c

+/*
+ * Copyright (C) 2015 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Author: Shobhit Kumar <shobhit.kumar@intel.com>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/pwm.h>
+
+#define PWM0_CLK_DIV		0x4B
+#define  PWM_OUTPUT_ENABLE	BIT(7)
+#define  PWM_DIV_CLK_0		0x00 /* DIVIDECLK = BASECLK */
+#define  PWM_DIV_CLK_100	0x63 /* DIVIDECLK = BASECLK/100 */
+#define  PWM_DIV_CLK_128	0x7F /* DIVIDECLK = BASECLK/128 */
+
+#define PWM0_DUTY_CYCLE		0x4E
+#define BACKLIGHT_EN		0x51
+
+#define PWM_MAX_LEVEL		0xFF
+
+#define PWM_BASE_CLK		6000000  /* 6 MHz */
+#define PWM_MAX_PERIOD_NS	21333    /* 46.875KHz */
+
+/**
+ * struct crystalcove_pwm - Crystal Cove PWM controller
+ * @chip: the abstract pwm_chip structure.
+ * @regmap: the regmap from the parent device.
+ */
+struct crystalcove_pwm {
+	struct pwm_chip chip;
+	struct regmap *regmap;
+};
+
+static inline struct crystalcove_pwm *to_crc_pwm(struct pwm_chip *pc)
+{
+	return container_of(pc, struct crystalcove_pwm, chip);
+}
+
+static int crc_pwm_enable(struct pwm_chip *c, struct pwm_device *pwm)
+{
+	struct crystalcove_pwm *crc_pwm = to_crc_pwm(c);
+
+	regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 1);
+
+	return 0;
+}
+
+static void crc_pwm_disable(struct pwm_chip *c, struct pwm_device *pwm)
+{
+	struct crystalcove_pwm *crc_pwm = to_crc_pwm(c);
+
+	regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 0);
+}
+
+static int crc_pwm_config(struct pwm_chip *c, struct pwm_device *pwm,
+			  int duty_ns, int period_ns)
+{
+	struct crystalcove_pwm *crc_pwm = to_crc_pwm(c);
+	struct device *dev = crc_pwm->chip.dev;
+	int level;
+
+	if (period_ns > PWM_MAX_PERIOD_NS) {
+		dev_err(dev, "un-supported period_ns\n");
+		return -EINVAL;
+	}
+
+	if (pwm->period != period_ns) {
+		int clk_div;
+
+		/* changing the clk divisor, need to disable fisrt */
+		crc_pwm_disable(c, pwm);
+		clk_div = PWM_BASE_CLK * period_ns / NSEC_PER_SEC;
+
+		regmap_write(crc_pwm->regmap, PWM0_CLK_DIV,
+					clk_div | PWM_OUTPUT_ENABLE);
+
+		/* enable back */
+		crc_pwm_enable(c, pwm);
+	}
+
+	/* change the pwm duty cycle */
+	level = duty_ns * PWM_MAX_LEVEL / period_ns;
+	regmap_write(crc_pwm->regmap, PWM0_DUTY_CYCLE, level);
+
+	return 0;
+}
+
+static const struct pwm_ops crc_pwm_ops = {
+	.config = crc_pwm_config,
+	.enable = crc_pwm_enable,
+	.disable = crc_pwm_disable,
+};
+
+static int crystalcove_pwm_probe(struct platform_device *pdev)
+{
+	struct crystalcove_pwm *pwm;
+	struct device *dev = pdev->dev.parent;
+	struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
+
+	pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
+	if (!pwm)
+		return -ENOMEM;
+
+	pwm->chip.dev = &pdev->dev;
+	pwm->chip.ops = &crc_pwm_ops;
+	pwm->chip.base = -1;
+	pwm->chip.npwm = 1;
+
+	/* get the PMIC regmap */
+	pwm->regmap = pmic->regmap;
+
+	platform_set_drvdata(pdev, pwm);
+
+	return pwmchip_add(&pwm->chip);
+}
+
+static int crystalcove_pwm_remove(struct platform_device *pdev)
+{
+	struct crystalcove_pwm *pwm = platform_get_drvdata(pdev);
+
+	return pwmchip_remove(&pwm->chip);
+}
+
+static struct platform_driver crystalcove_pwm_driver = {
+	.probe = crystalcove_pwm_probe,
+	.remove = crystalcove_pwm_remove,
+	.driver = {
+		.name = "crystal_cove_pwm",
+	},
+};
+
+builtin_platform_driver(crystalcove_pwm_driver);

include/linux/gpio/machine.h

@@ -57,5 +57,6 @@ struct gpiod_lookup_table {
 }
 
 void gpiod_add_lookup_table(struct gpiod_lookup_table *table);
+void gpiod_remove_lookup_table(struct gpiod_lookup_table *table);
 
 #endif /* __LINUX_GPIO_MACHINE_H */