Merge tp1.ruhr-uni-bochum.de:/home/kai/kernel/v2.5/linux-2.5.isdn

into tp1.ruhr-uni-bochum.de:/home/kai/kernel/v2.5/linux-2.5.make

drivers/Makefile

@@ -39,6 +39,6 @@ obj-$(CONFIG_PHONE)		+= telephony/
 obj-$(CONFIG_MD)		+= md/
 obj-$(CONFIG_BLUEZ)		+= bluetooth/
 obj-$(CONFIG_HOTPLUG_PCI)	+= hotplug/
-obj-$(CONFIG_ISDN)		+= isdn/
+obj-$(CONFIG_ISDN_BOOL)		+= isdn/
 
 include $(TOPDIR)/Rules.make

drivers/isdn/act2000/Config.in

@@ -2,5 +2,5 @@
 # Config.in for IBM Active 2000 ISDN driver
 #
 
-dep_tristate       'IBM Active 2000 support' CONFIG_ISDN_DRV_ACT2000 $CONFIG_ISDN
+dep_tristate       'IBM Active 2000 support' CONFIG_ISDN_DRV_ACT2000 $CONFIG_ISDN $CONFIG_ISA
 

drivers/isdn/eicon/eicon_idi.c

@@ -2972,7 +2972,7 @@ idi_send_data(eicon_card *card, eicon_chan *chan, int ack, struct sk_buff *skb,
 			spin_unlock_irqrestore(&eicon_lock, flags);
         	        eicon_log(card, 1, "idi_err: Ch%d: alloc_skb failed in send_data()\n", chan->No);
 			if (xmit_skb) 
-				dev_kfree_skb(skb);
+				dev_kfree_skb(xmit_skb);
 			if (skb2) 
 				dev_kfree_skb(skb2);
                 	return -ENOMEM;

drivers/isdn/hardware/avm/Config.in

@@ -8,12 +8,12 @@ comment 'Drivers for active AVM cards'
 bool 'Support AVM cards' CONFIG_CAPI_AVM
 
 if [ "$CONFIG_CAPI_AVM" != "n" ]; then
-   dep_tristate '  AVM B1 ISA support' CONFIG_ISDN_DRV_AVMB1_B1ISA               $CONFIG_ISDN_CAPI
+   dep_tristate '  AVM B1 ISA support' CONFIG_ISDN_DRV_AVMB1_B1ISA               $CONFIG_ISDN_CAPI $CONFIG_SA
 
    dep_tristate '  AVM B1 PCI support'            CONFIG_ISDN_DRV_AVMB1_B1PCI    $CONFIG_ISDN_CAPI $CONFIG_PCI
    dep_mbool    '    AVM B1 PCI V4 support'       CONFIG_ISDN_DRV_AVMB1_B1PCIV4  $CONFIG_ISDN_DRV_AVMB1_B1PCI
 
-   dep_tristate '  AVM T1/T1-B ISA support'       CONFIG_ISDN_DRV_AVMB1_T1ISA    $CONFIG_ISDN_CAPI
+   dep_tristate '  AVM T1/T1-B ISA support'       CONFIG_ISDN_DRV_AVMB1_T1ISA    $CONFIG_ISDN_CAPI $CONFIG_ISA
 
    dep_tristate '  AVM B1/M1/M2 PCMCIA support'   CONFIG_ISDN_DRV_AVMB1_B1PCMCIA $CONFIG_ISDN_CAPI
 

drivers/isdn/hardware/avm/b1pci.c

@@ -211,7 +211,7 @@ static int b1pciv4_probe(struct capicardparams *p, struct pci_dev *pdev)
 		goto err_free_dma;
 	}
 
-	card->mbase = ioremap_nocache(card->membase, 64);
+	card->mbase = ioremap(card->membase, 64);
 	if (!card->mbase) {
 		printk(KERN_NOTICE "b1pci: can't remap memory at 0x%lx\n",
 		       card->membase);

drivers/isdn/hardware/avm/c4.c

@@ -1129,7 +1129,7 @@ static int c4_add_card(struct capicardparams *p, struct pci_dev *dev,
 		goto err_free_dma;
 	}
 
-	card->mbase = ioremap_nocache(card->membase, 128);
+	card->mbase = ioremap(card->membase, 128);
 	if (card->mbase == 0) {
 		printk(KERN_NOTICE "c4: can't remap memory at 0x%lx\n",
 		       card->membase);

drivers/isdn/hardware/avm/t1pci.c

@@ -79,7 +79,7 @@ static int t1pci_add_card(struct capicardparams *p, struct pci_dev *pdev)
 		goto err_free_dma;
 	}
 
-	card->mbase = ioremap_nocache(card->membase, 64);
+	card->mbase = ioremap(card->membase, 64);
 	if (!card->mbase) {
 		printk(KERN_NOTICE "t1pci: can't remap memory at 0x%lx\n",
 		       card->membase);

drivers/isdn/hisax/Config.help

@@ -251,6 +251,10 @@ CONFIG_HISAX_SEDLBAUER_CS
   This enables the PCMCIA client driver for the Sedlbauer Speed Star
   and Speed Star II cards.
 
+CONFIG_HISAX_AVM_A1_CS
+  This enables the PCMCIA client driver for the AVM A1 / Fritz!Card
+  PCMCIA cards.
+
 CONFIG_HISAX_ST5481
   This enables the driver for ST5481 based USB ISDN adapters,
   e.g. the BeWan Gazel 128 USB

drivers/isdn/hisax/Config.in

@@ -14,28 +14,28 @@ if [ "$CONFIG_ISDN_DRV_HISAX" != "n" ]; then
    bool '  HiSax Support for US NI1' CONFIG_HISAX_NI1
    int  '  Maximum number of cards supported by HiSax' CONFIG_HISAX_MAX_CARDS 8
    comment '  HiSax supported cards'
-   bool '  Teles 16.0/8.0' CONFIG_HISAX_16_0
+   bool '  Teles 16.0/8.0' CONFIG_HISAX_16_0 $CONFIG_ISA
    bool '  Teles 16.3 or PNP or PCMCIA' CONFIG_HISAX_16_3
    bool '  Teles PCI' CONFIG_HISAX_TELESPCI 
    bool '  Teles S0Box' CONFIG_HISAX_S0BOX 
-   bool '  AVM A1 (Fritz)' CONFIG_HISAX_AVM_A1
+   bool '  AVM A1 (Fritz)' CONFIG_HISAX_AVM_A1 $CONFIG_ISA
    bool '  AVM PnP/PCI (Fritz!PnP/PCI)' CONFIG_HISAX_FRITZPCI
    bool '  AVM A1 PCMCIA (Fritz)' CONFIG_HISAX_AVM_A1_PCMCIA
    bool '  Elsa cards' CONFIG_HISAX_ELSA
-   bool '  ITK ix1-micro Revision 2' CONFIG_HISAX_IX1MICROR2
+   bool '  ITK ix1-micro Revision 2' CONFIG_HISAX_IX1MICROR2 $CONFIG_ISA
    bool '  Eicon.Diehl Diva cards' CONFIG_HISAX_DIEHLDIVA
-   bool '  ASUSCOM ISA cards' CONFIG_HISAX_ASUSCOM
-   bool '  TELEINT cards' CONFIG_HISAX_TELEINT
-   bool '  HFC-S based cards' CONFIG_HISAX_HFCS
+   bool '  ASUSCOM ISA cards' CONFIG_HISAX_ASUSCOM $CONFIG_ISA
+   bool '  TELEINT cards' CONFIG_HISAX_TELEINT $CONFIG_ISA
+   bool '  HFC-S based cards' CONFIG_HISAX_HFCS $CONFIG_ISA
    bool '  Sedlbauer cards' CONFIG_HISAX_SEDLBAUER
-   bool '  USR Sportster internal TA' CONFIG_HISAX_SPORTSTER
-   bool '  MIC card' CONFIG_HISAX_MIC
+   bool '  USR Sportster internal TA' CONFIG_HISAX_SPORTSTER $CONFIG_ISA
+   bool '  MIC card' CONFIG_HISAX_MIC $CONFIG_ISA
    bool '  NETjet card' CONFIG_HISAX_NETJET
    bool '  NETspider U card' CONFIG_HISAX_NETJET_U
    bool '  Niccy PnP/PCI card' CONFIG_HISAX_NICCY
-   bool '  Siemens I-Surf card' CONFIG_HISAX_ISURF
-   bool '  HST Saphir card' CONFIG_HISAX_HSTSAPHIR
-   bool '  Telekom A4T card' CONFIG_HISAX_BKM_A4T
+   bool '  Siemens I-Surf card' CONFIG_HISAX_ISURF $CONFIG_ISA
+   bool '  HST Saphir card' CONFIG_HISAX_HSTSAPHIR $CONFIG_ISA
+   bool '  Telekom A4T card' CONFIG_HISAX_BKM_A4T 
    bool '  Scitel Quadro card' CONFIG_HISAX_SCT_QUADRO
    bool '  Gazel cards' CONFIG_HISAX_GAZEL
    bool '  HFC PCI-Bus cards' CONFIG_HISAX_HFC_PCI
@@ -52,6 +52,7 @@ if [ "$CONFIG_ISDN_DRV_HISAX" != "n" ]; then
 
    dep_tristate 'Sedlbauer PCMCIA cards'                              CONFIG_HISAX_SEDLBAUER_CS  $CONFIG_ISDN_DRV_HISAX $CONFIG_PCMCIA
    dep_tristate 'ELSA PCMCIA MicroLink cards'                         CONFIG_HISAX_ELSA_CS       $CONFIG_ISDN_DRV_HISAX $CONFIG_PCMCIA
+   dep_tristate 'AVM A1 PCMCIA cards'                                 CONFIG_HISAX_AVM_A1_CS     $CONFIG_ISDN_DRV_HISAX $CONFIG_PCMCIA
    dep_tristate 'ST5481 USB ISDN modem (EXPERIMENTAL)'                CONFIG_HISAX_ST5481        $CONFIG_ISDN_DRV_HISAX $CONFIG_USB $CONFIG_EXPERIMENTAL
    dep_tristate 'AVM Fritz!Card PCI/PCIv2/PnP support (EXPERIMENTAL)' CONFIG_HISAX_FRITZ_PCIPNP  $CONFIG_ISDN_DRV_HISAX $CONFIG_EXPERIMENTAL
    dep_tristate 'AVM Fritz!Card classic support (EXPERIMENTAL)'       CONFIG_HISAX_FRITZ_CLASSIC $CONFIG_ISDN_DRV_HISAX  $CONFIG_EXPERIMENTAL

drivers/isdn/hisax/Makefile

@@ -13,6 +13,7 @@ export-objs	  := config.o hisax_isac.o hisax_hscx.o
 obj-$(CONFIG_ISDN_DRV_HISAX)		+= hisax.o
 obj-$(CONFIG_HISAX_SEDLBAUER_CS)	+= sedlbauer_cs.o
 obj-$(CONFIG_HISAX_ELSA_CS)		+= elsa_cs.o
+obj-$(CONFIG_HISAX_AVM_A1_CS)		+= avma1_cs.o
 obj-$(CONFIG_HISAX_ST5481)		+= hisax_st5481.o
 obj-$(CONFIG_HISAX_FRITZ_PCIPNP)        += hisax_isac.o hisax_fcpcipnp.o
 obj-$(CONFIG_HISAX_FRITZ_CLASSIC)       += hisax_isac.o hisax_hscx.o hisax_fcclassic.o

drivers/isdn/hisax/avma1_cs.c

+/*
+ * PCMCIA client driver for AVM A1 / Fritz!PCMCIA
+ *
+ * Author       Carsten Paeth
+ * Copyright    1998-2001 by Carsten Paeth <calle@calle.in-berlin.de>
+ * 
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#include <linux/module.h>
+
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+
+MODULE_DESCRIPTION("ISDN4Linux: PCMCIA client driver for AVM A1/Fritz!PCMCIA cards");
+MODULE_AUTHOR("Carsten Paeth");
+MODULE_LICENSE("GPL");
+
+int avm_a1_init_pcmcia(void *pcm_iob, int pcm_irq, int *busy_flag, int prot);
+void HiSax_closecard(int cardnr);
+
+
+/*
+   All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
+   you do not define PCMCIA_DEBUG at all, all the debug code will be
+   left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
+   be present but disabled -- but it can then be enabled for specific
+   modules at load time with a 'pc_debug=#' option to insmod.
+*/
+#ifdef PCMCIA_DEBUG
+static int pc_debug = PCMCIA_DEBUG;
+MODULE_PARM(pc_debug, "i");
+#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
+static char *version =
+"avma1_cs.c 1.00 1998/01/23 10:00:00 (Carsten Paeth)";
+#else
+#define DEBUG(n, args...)
+#endif
+
+/*====================================================================*/
+
+/* Parameters that can be set with 'insmod' */
+
+static int default_irq_list[11] = { 15, 13, 12, 11, 10, 9, 7, 5, 4, 3, -1 };
+static int irq_list[11] = { -1 };
+static int isdnprot = 2;
+
+MODULE_PARM(irq_list, "1-11i");
+MODULE_PARM(isdnprot, "1-4i");
+
+/*====================================================================*/
+
+/*
+   The event() function is this driver's Card Services event handler.
+   It will be called by Card Services when an appropriate card status
+   event is received.  The config() and release() entry points are
+   used to configure or release a socket, in response to card insertion
+   and ejection events.  They are invoked from the skeleton event
+   handler.
+*/
+
+static void avma1cs_config(dev_link_t *link);
+static void avma1cs_release(u_long arg);
+static int avma1cs_event(event_t event, int priority,
+			  event_callback_args_t *args);
+
+/*
+   The attach() and detach() entry points are used to create and destroy
+   "instances" of the driver, where each instance represents everything
+   needed to manage one actual PCMCIA card.
+*/
+
+static dev_link_t *avma1cs_attach(void);
+static void avma1cs_detach(dev_link_t *);
+
+/*
+   The dev_info variable is the "key" that is used to match up this
+   device driver with appropriate cards, through the card configuration
+   database.
+*/
+
+static dev_info_t dev_info = "avma1_cs";
+
+/*
+   A linked list of "instances" of the skeleton device.  Each actual
+   PCMCIA card corresponds to one device instance, and is described
+   by one dev_link_t structure (defined in ds.h).
+
+   You may not want to use a linked list for this -- for example, the
+   memory card driver uses an array of dev_link_t pointers, where minor
+   device numbers are used to derive the corresponding array index.
+*/
+
+static dev_link_t *dev_list = NULL;
+
+/*
+   A dev_link_t structure has fields for most things that are needed
+   to keep track of a socket, but there will usually be some device
+   specific information that also needs to be kept track of.  The
+   'priv' pointer in a dev_link_t structure can be used to point to
+   a device-specific private data structure, like this.
+
+   A driver needs to provide a dev_node_t structure for each device
+   on a card.  In some cases, there is only one device per card (for
+   example, ethernet cards, modems).  In other cases, there may be
+   many actual or logical devices (SCSI adapters, memory cards with
+   multiple partitions).  The dev_node_t structures need to be kept
+   in a linked list starting at the 'dev' field of a dev_link_t
+   structure.  We allocate them in the card's private data structure,
+   because they generally can't be allocated dynamically.
+*/
+   
+typedef struct local_info_t {
+    dev_node_t	node;
+} local_info_t;
+
+/*====================================================================*/
+
+static void cs_error(client_handle_t handle, int func, int ret)
+{
+    error_info_t err = { func, ret };
+    CardServices(ReportError, handle, &err);
+}
+
+/*======================================================================
+
+    avma1cs_attach() creates an "instance" of the driver, allocating
+    local data structures for one device.  The device is registered
+    with Card Services.
+
+    The dev_link structure is initialized, but we don't actually
+    configure the card at this point -- we wait until we receive a
+    card insertion event.
+    
+======================================================================*/
+
+static dev_link_t *avma1cs_attach(void)
+{
+    client_reg_t client_reg;
+    dev_link_t *link;
+    local_info_t *local;
+    int ret, i;
+    
+    DEBUG(0, "avma1cs_attach()\n");
+
+    /* Initialize the dev_link_t structure */
+    link = kmalloc(sizeof(struct dev_link_t), GFP_KERNEL);
+    memset(link, 0, sizeof(struct dev_link_t));
+    link->release.function = &avma1cs_release;
+    link->release.data = (u_long)link;
+
+    /* The io structure describes IO port mapping */
+    link->io.NumPorts1 = 16;
+    link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+    link->io.NumPorts2 = 16;
+    link->io.Attributes2 = IO_DATA_PATH_WIDTH_16;
+    link->io.IOAddrLines = 5;
+
+    /* Interrupt setup */
+    link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
+
+    link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
+    if (irq_list[0] != -1) {
+	    for (i = 0; i < 10 && irq_list[i] > 0; i++)
+	       link->irq.IRQInfo2 |= 1 << irq_list[i];
+    } else {
+	    for (i = 0; i < 10 && default_irq_list[i] > 0; i++)
+	       link->irq.IRQInfo2 |= 1 << default_irq_list[i];
+    }
+    
+    /* General socket configuration */
+    link->conf.Attributes = CONF_ENABLE_IRQ;
+    link->conf.Vcc = 50;
+    link->conf.IntType = INT_MEMORY_AND_IO;
+    link->conf.ConfigIndex = 1;
+    link->conf.Present = PRESENT_OPTION;
+
+    /* Allocate space for private device-specific data */
+    local = kmalloc(sizeof(local_info_t), GFP_KERNEL);
+    memset(local, 0, sizeof(local_info_t));
+    link->priv = local;
+    
+    /* Register with Card Services */
+    link->next = dev_list;
+    dev_list = link;
+    client_reg.dev_info = &dev_info;
+    client_reg.Attributes = INFO_IO_CLIENT | INFO_CARD_SHARE;
+    client_reg.EventMask =
+	CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
+	CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
+	CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
+    client_reg.event_handler = &avma1cs_event;
+    client_reg.Version = 0x0210;
+    client_reg.event_callback_args.client_data = link;
+    ret = CardServices(RegisterClient, &link->handle, &client_reg);
+    if (ret != 0) {
+	cs_error(link->handle, RegisterClient, ret);
+	avma1cs_detach(link);
+	return NULL;
+    }
+
+    return link;
+} /* avma1cs_attach */
+
+/*======================================================================
+
+    This deletes a driver "instance".  The device is de-registered
+    with Card Services.  If it has been released, all local data
+    structures are freed.  Otherwise, the structures will be freed
+    when the device is released.
+
+======================================================================*/
+
+static void avma1cs_detach(dev_link_t *link)
+{
+    dev_link_t **linkp;
+
+    DEBUG(0, "avma1cs_detach(0x%p)\n", link);
+    
+    /* Locate device structure */
+    for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
+	if (*linkp == link) break;
+    if (*linkp == NULL)
+	return;
+
+    /*
+       If the device is currently configured and active, we won't
+       actually delete it yet.  Instead, it is marked so that when
+       the release() function is called, that will trigger a proper
+       detach().
+    */
+    if (link->state & DEV_CONFIG) {
+#ifdef PCMCIA_DEBUG
+	printk(KERN_DEBUG "avma1_cs: detach postponed, '%s' "
+	       "still locked\n", link->dev->dev_name);
+#endif
+	link->state |= DEV_STALE_LINK;
+	return;
+    }
+
+    /* Break the link with Card Services */
+    if (link->handle)
+	CardServices(DeregisterClient, link->handle);
+    
+    /* Unlink device structure, free pieces */
+    *linkp = link->next;
+    if (link->priv) {
+	kfree(link->priv);
+    }
+    kfree(link);
+    
+} /* avma1cs_detach */
+
+/*======================================================================
+
+    avma1cs_config() is scheduled to run after a CARD_INSERTION event
+    is received, to configure the PCMCIA socket, and to make the
+    ethernet device available to the system.
+    
+======================================================================*/
+
+static int get_tuple(int fn, client_handle_t handle, tuple_t *tuple,
+		     cisparse_t *parse)
+{
+    int i;
+    i = CardServices(fn, handle, tuple);
+    if (i != CS_SUCCESS) return i;
+    i = CardServices(GetTupleData, handle, tuple);
+    if (i != CS_SUCCESS) return i;
+    return CardServices(ParseTuple, handle, tuple, parse);
+}
+
+#define first_tuple(a, b, c) get_tuple(GetFirstTuple, a, b, c)
+#define next_tuple(a, b, c) get_tuple(GetNextTuple, a, b, c)
+
+static void avma1cs_config(dev_link_t *link)
+{
+    client_handle_t handle;
+    tuple_t tuple;
+    cisparse_t parse;
+    cistpl_cftable_entry_t *cf = &parse.cftable_entry;
+    local_info_t *dev;
+    int i;
+    u_char buf[64];
+    char devname[128];
+    int busy = 0;
+    
+    handle = link->handle;
+    dev = link->priv;
+
+    DEBUG(0, "avma1cs_config(0x%p)\n", link);
+
+    /*
+       This reads the card's CONFIG tuple to find its configuration
+       registers.
+    */
+    do {
+	tuple.DesiredTuple = CISTPL_CONFIG;
+	i = CardServices(GetFirstTuple, handle, &tuple);
+	if (i != CS_SUCCESS) break;
+	tuple.TupleData = buf;
+	tuple.TupleDataMax = 64;
+	tuple.TupleOffset = 0;
+	i = CardServices(GetTupleData, handle, &tuple);
+	if (i != CS_SUCCESS) break;
+	i = CardServices(ParseTuple, handle, &tuple, &parse);
+	if (i != CS_SUCCESS) break;
+	link->conf.ConfigBase = parse.config.base;
+    } while (0);
+    if (i != CS_SUCCESS) {
+	cs_error(link->handle, ParseTuple, i);
+	link->state &= ~DEV_CONFIG_PENDING;
+	return;
+    }
+    
+    /* Configure card */
+    link->state |= DEV_CONFIG;
+
+    do {
+
+	tuple.Attributes = 0;
+	tuple.TupleData = buf;
+	tuple.TupleDataMax = 254;
+	tuple.TupleOffset = 0;
+	tuple.DesiredTuple = CISTPL_VERS_1;
+
+	devname[0] = 0;
+	if( !first_tuple(handle, &tuple, &parse) && parse.version_1.ns > 1 ) {
+	    strncpy(devname,parse.version_1.str + parse.version_1.ofs[1], 
+			sizeof(devname));
+	}
+	/*
+         * find IO port
+         */
+	tuple.TupleData = (cisdata_t *)buf;
+	tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
+	tuple.Attributes = 0;
+	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+	i = first_tuple(handle, &tuple, &parse);
+	while (i == CS_SUCCESS) {
+	    if (cf->io.nwin > 0) {
+		link->conf.ConfigIndex = cf->index;
+		link->io.BasePort1 = cf->io.win[0].base;
+		link->io.NumPorts1 = cf->io.win[0].len;
+		link->io.NumPorts2 = 0;
+                printk(KERN_INFO "avma1_cs: testing i/o %#x-%#x\n",
+			link->io.BasePort1,
+		        link->io.BasePort1+link->io.NumPorts1 - 1);
+		i = CardServices(RequestIO, link->handle, &link->io);
+		if (i == CS_SUCCESS) goto found_port;
+	    }
+	    i = next_tuple(handle, &tuple, &parse);
+	}
+
+found_port:
+	if (i != CS_SUCCESS) {
+	    cs_error(link->handle, RequestIO, i);
+	    break;
+	}
+	
+	/*
+	 * allocate an interrupt line
+	 */
+	i = CardServices(RequestIRQ, link->handle, &link->irq);
+	if (i != CS_SUCCESS) {
+	    cs_error(link->handle, RequestIRQ, i);
+	    CardServices(ReleaseIO, link->handle, &link->io);
+	    break;
+	}
+	
+	/*
+         * configure the PCMCIA socket
+	  */
+	i = CardServices(RequestConfiguration, link->handle, &link->conf);
+	if (i != CS_SUCCESS) {
+	    cs_error(link->handle, RequestConfiguration, i);
+	    CardServices(ReleaseIO, link->handle, &link->io);
+	    CardServices(ReleaseIRQ, link->handle, &link->irq);
+	    break;
+	}
+
+    } while (0);
+
+    /* At this point, the dev_node_t structure(s) should be
+       initialized and arranged in a linked list at link->dev. */
+
+    strcpy(dev->node.dev_name, "A1");
+    dev->node.major = 45;
+    dev->node.minor = 0;
+    link->dev = &dev->node;
+    
+    link->state &= ~DEV_CONFIG_PENDING;
+    /* If any step failed, release any partially configured state */
+    if (i != 0) {
+	avma1cs_release((u_long)link);
+	return;
+    }
+
+    printk(KERN_NOTICE "avma1_cs: checking at i/o %#x, irq %d\n",
+				link->io.BasePort1, link->irq.AssignedIRQ);
+
+    if (avm_a1_init_pcmcia((void *)(int)link->io.BasePort1,
+                           link->irq.AssignedIRQ,
+                           &busy, isdnprot) != 0) {
+       printk(KERN_ERR "avma1_cs: failed to initialize AVM A1 PCMCIA %d at i/o %#x\n", i, link->io.BasePort1);
+       return;
+    }
+
+    i = 0; /* no returncode for cardnr :-( */
+
+    dev->node.minor = i;
+
+} /* avma1cs_config */
+
+/*======================================================================
+
+    After a card is removed, avma1cs_release() will unregister the net
+    device, and release the PCMCIA configuration.  If the device is
+    still open, this will be postponed until it is closed.
+    
+======================================================================*/
+
+static void avma1cs_release(u_long arg)
+{
+    dev_link_t *link = (dev_link_t *)arg;
+    local_info_t *local = link->priv;
+
+    DEBUG(0, "avma1cs_release(0x%p)\n", link);
+
+    /*
+       If the device is currently in use, we won't release until it
+       is actually closed.
+    */
+    if (link->open) {
+	DEBUG(1, "avma1_cs: release postponed, '%s' still open\n",
+	      link->dev->dev_name);
+	link->state |= DEV_STALE_CONFIG;
+	return;
+    }
+
+    /* no unregister function with hisax */
+    HiSax_closecard(local->node.minor);
+
+    /* Unlink the device chain */
+    link->dev = NULL;
+    
+    /* Don't bother checking to see if these succeed or not */
+    CardServices(ReleaseConfiguration, link->handle);
+    CardServices(ReleaseIO, link->handle, &link->io);
+    CardServices(ReleaseIRQ, link->handle, &link->irq);
+    link->state &= ~DEV_CONFIG;
+    
+    if (link->state & DEV_STALE_LINK)
+	avma1cs_detach(link);
+    
+} /* avma1cs_release */
+
+/*======================================================================
+
+    The card status event handler.  Mostly, this schedules other
+    stuff to run after an event is received.  A CARD_REMOVAL event
+    also sets some flags to discourage the net drivers from trying
+    to talk to the card any more.
+
+    When a CARD_REMOVAL event is received, we immediately set a flag
+    to block future accesses to this device.  All the functions that
+    actually access the device should check this flag to make sure
+    the card is still present.
+    
+======================================================================*/
+
+static int avma1cs_event(event_t event, int priority,
+			  event_callback_args_t *args)
+{
+    dev_link_t *link = args->client_data;
+
+    DEBUG(1, "avma1cs_event(0x%06x)\n", event);
+    
+    switch (event) {
+    case CS_EVENT_CARD_REMOVAL:
+	link->state &= ~DEV_PRESENT;
+	if (link->state & DEV_CONFIG) {
+	    link->release.expires =  jiffies + HZ/20;
+	    add_timer(&link->release);
+	}
+	break;
+    case CS_EVENT_CARD_INSERTION:
+	link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+	avma1cs_config(link);
+	break;
+    case CS_EVENT_PM_SUSPEND:
+	link->state |= DEV_SUSPEND;
+	/* Fall through... */
+    case CS_EVENT_RESET_PHYSICAL:
+	if (link->state & DEV_CONFIG)
+	    CardServices(ReleaseConfiguration, link->handle);
+	break;
+    case CS_EVENT_PM_RESUME:
+	link->state &= ~DEV_SUSPEND;
+	/* Fall through... */
+    case CS_EVENT_CARD_RESET:
+	if (link->state & DEV_CONFIG)
+	    CardServices(RequestConfiguration, link->handle, &link->conf);
+	break;
+    }
+    return 0;
+} /* avma1cs_event */
+
+/*====================================================================*/
+
+static int __init init_avma1_cs(void)
+{
+    servinfo_t serv;
+    DEBUG(0, "%s\n", version);
+    CardServices(GetCardServicesInfo, &serv);
+    if (serv.Revision != CS_RELEASE_CODE) {
+        printk(KERN_NOTICE "avma1_cs: Card Services release "
+               "does not match!\n");
+        return -1;
+    }
+    register_pccard_driver(&dev_info, &avma1cs_attach, &avma1cs_detach);
+    return 0;
+}
+
+static void __exit exit_avma1_cs(void)
+{
+    DEBUG(0, "avma1_cs: unloading\n");
+    unregister_pccard_driver(&dev_info);
+    while (dev_list != NULL)
+	if (dev_list->state & DEV_CONFIG)
+	    avma1cs_release((u_long)dev_list);
+        avma1cs_detach(dev_list);
+}
+
+module_init(init_avma1_cs);
+module_exit(exit_avma1_cs);

drivers/isdn/icn/Config.in

@@ -2,4 +2,4 @@
 # Config.in for ICN ISDN driver
 #
 
-dep_tristate       'ICN 2B and 4B support' CONFIG_ISDN_DRV_ICN $CONFIG_ISDN
+dep_tristate       'ICN 2B and 4B support' CONFIG_ISDN_DRV_ICN $CONFIG_ISDN $CONFIG_ISA

drivers/isdn/pcbit/Config.in

@@ -2,4 +2,4 @@
 # Config.in for PCBIT ISDN driver
 #
 
-dep_tristate       'PCBIT-D support' CONFIG_ISDN_DRV_PCBIT $CONFIG_ISDN
+dep_tristate       'PCBIT-D support' CONFIG_ISDN_DRV_PCBIT $CONFIG_ISDN $CONFIG_ISA

drivers/isdn/pcbit/pcbit.h

@@ -12,6 +12,8 @@
 #ifndef PCBIT_H
 #define PCBIT_H
 
+#include <linux/tqueue.h>
+
 #define MAX_PCBIT_CARDS 4
 
 

drivers/isdn/sc/Config.in

@@ -2,4 +2,4 @@
 # Config.in for Spellcaster ISDN driver
 #
 
-dep_tristate       'Spellcaster support' CONFIG_ISDN_DRV_SC $CONFIG_ISDN
+dep_tristate       'Spellcaster support' CONFIG_ISDN_DRV_SC $CONFIG_ISDN $CONFIG_ISA

drivers/isdn/tpam/tpam.h

@@ -16,6 +16,7 @@
 
 #include <linux/isdnif.h>
 #include <linux/init.h>
+#include <linux/tqueue.h>
 
 /* Maximum number of channels for this board */
 #define TPAM_NBCHANNEL		30