Merge maxwell.earthlink.net:/usr/src/linus-2.5

into maxwell.earthlink.net:/usr/src/fbdev-2.5

CREDITS

@@ -2843,6 +2843,16 @@ S: Klosterweg 28 / i309
 S: 76131 Karlsruhe
 S: Germany
 
+N: James Simmons 
+E: jsimmons@users.sf.net 
+D: Frame buffer device maintainer
+D: input layer developement 
+D: tty/console layer
+D: various mipsel devices 
+S: 115 Carmel Avenue 
+S: El Cerrito CA 94530
+S: USA 
+
 N: Jaspreet Singh
 E: jaspreet@sangoma.com
 W: www.sangoma.com

Documentation/DocBook/kernel-api.tmpl

@@ -365,7 +365,7 @@ KAO -->
 !Edrivers/video/fbmem.c
      </sect1>
      <sect1><title>Frame Buffer Console</title>
-!Edrivers/video/fbcon.c
+!Edrivers/video/console/fbcon.c
      </sect1>
      <sect1><title>Frame Buffer Colormap</title>
 !Edrivers/video/fbcmap.c
@@ -385,7 +385,7 @@ KAO -->
 !Idrivers/video/macmodes.c
      </sect1>
      <sect1><title>Frame Buffer Fonts</title>
-!Idrivers/video/fonts.c
+!Idrivers/video/console/fonts.c
      </sect1>
   </chapter>
 <!-- Needs ksyms to list additional exported symbols, but no specific doc.

Documentation/fb/internals.txt

@@ -3,6 +3,7 @@ This is a first start for some documentation about frame buffer device
 internals.
 
 Geert Uytterhoeven <geert@linux-m68k.org>, 21 July 1998
+James Simmons <jsimmons@user.sf.net>, Nov 26 2002
 
 --------------------------------------------------------------------------------
 
@@ -44,10 +45,6 @@ are defined in <linux/fb.h>.
     Device dependent information that uniquely defines the video mode for this
     particular piece of hardware.
 
-  - struct display
-
-    Interface between the frame buffer device and the console driver.
-
 
 --------------------------------------------------------------------------------
 

MAINTAINERS

@@ -642,6 +642,13 @@ M:	kevin.curtis@farsite.co.uk
 W:	http://www.farsite.co.uk/
 S:	Supported
 
+FRAMEBUFFER LAYER
+P:	James Simmons, Geert Uytterhoeven	
+M:	jsimmons@users.sf.net, geert@linux-m68k.org	
+L:	linux-fbdev-devel@lists.sourceforge.net	
+W:	http://www.linux-fbdev.org
+S:	Supported
+
 FILE LOCKING (flock() and fcntl()/lockf())
 P:	Matthew Wilcox
 M:	matthew@wil.cx

arch/alpha/Kconfig

@@ -900,39 +900,8 @@ source "drivers/media/Kconfig"
 
 source "fs/Kconfig"
 
-
-menu "Console drivers"
-	depends on VT
-
-config VGA_CONSOLE
-	bool "VGA text console"
-	help
-	  Saying Y here will allow you to use Linux in text mode through a
-	  display that complies with the generic VGA standard. Virtually
-	  everyone wants that.
-
-	  The program SVGATextMode can be used to utilize SVGA video cards to
-	  their full potential in text mode. Download it from
-	  <ftp://ibiblio.org/pub/Linux/utils/console/>.
-
-	  Say Y.
-
-#  if [ "$CONFIG_PCI" = "y" -a "$CONFIG_VGA_CONSOLE" = "y" ]; then
-#    bool '   Allow VGA on any bus?' CONFIG_VGA_HOSE
-#    if [ "$CONFIG_VGA_HOSE" = "y" ]; then
-#      define_bool CONFIG_DUMMY_CONSOLE y
-#    fi
-#  fi
 source "drivers/video/Kconfig"
 
-config PCI_CONSOLE
-	bool
-	depends on FB
-	default y
-
-endmenu
-
-
 menu "Sound"
 
 config SOUND

arch/arm/Kconfig

@@ -1047,29 +1047,8 @@ source "drivers/media/Kconfig"
 
 source "fs/Kconfig"
 
-
-menu "Console drivers"
-	depends on VT
-
-config VGA_CONSOLE
-	bool "VGA text console"
-	depends on !ARCH_ACORN && !ARCH_EBSA110
-	help
-	  Saying Y here will allow you to use Linux in text mode through a
-	  display that complies with the generic VGA standard. Virtually
-	  everyone wants that.
-
-	  The program SVGATextMode can be used to utilize SVGA video cards to
-	  their full potential in text mode. Download it from
-	  <ftp://ibiblio.org/pub/Linux/utils/console/>.
-
-	  Say Y.
-
 source "drivers/video/Kconfig"
 
-endmenu
-
-
 menu "Sound"
 	depends on ARCH_ACORN || ARCH_CLPS7500 || ARCH_TBOX || ARCH_SHARK || ARCH_SA1100 || PCI
 

arch/i386/Kconfig

@@ -1445,63 +1445,8 @@ source "drivers/media/Kconfig"
 
 source "fs/Kconfig"
 
-
-menu "Console drivers"
-	depends on VT
-
-config VGA_CONSOLE
-	bool "VGA text console"
-	help
-	  Saying Y here will allow you to use Linux in text mode through a
-	  display that complies with the generic VGA standard. Virtually
-	  everyone wants that.
-
-	  The program SVGATextMode can be used to utilize SVGA video cards to
-	  their full potential in text mode. Download it from
-	  <ftp://ibiblio.org/pub/Linux/utils/console/>.
-
-	  Say Y.
-
-config VIDEO_SELECT
-	bool "Video mode selection support"
-	---help---
-	  This enables support for text mode selection on kernel startup. If
-	  you want to take advantage of some high-resolution text mode your
-	  card's BIOS offers, but the traditional Linux utilities like
-	  SVGATextMode don't, you can say Y here and set the mode using the
-	  "vga=" option from your boot loader (lilo or loadlin) or set
-	  "vga=ask" which brings up a video mode menu on kernel startup. (Try
-	  "man bootparam" or see the documentation of your boot loader about
-	  how to pass options to the kernel.)
-
-	  Read the file <file:Documentation/svga.txt> for more information
-	  about the Video mode selection support. If unsure, say N.
-
-if EXPERIMENTAL
-
-config MDA_CONSOLE
-	tristate "MDA text console (dual-headed) (EXPERIMENTAL)"
-	---help---
-	  Say Y here if you have an old MDA or monochrome Hercules graphics
-	  adapter in your system acting as a second head ( = video card). You
-	  will then be able to use two monitors with your Linux system. Do not
-	  say Y here if your MDA card is the primary card in your system; the
-	  normal VGA driver will handle it.
-
-	  This driver is also available as a module ( = code which can be
-	  inserted and removed from the running kernel whenever you want).
-	  The module will be called mdacon.o. If you want to compile it as
-	  a module, say M here and read <file:Documentation/modules.txt>.
-
-	  If unsure, say N.
-
 source "drivers/video/Kconfig"
 
-endif
-
-endmenu
-
-
 menu "Sound"
 
 config SOUND

arch/ia64/Kconfig

@@ -729,33 +729,8 @@ source "fs/Kconfig"
 
 if !IA64_HP_SIM
 
-
-menu "Console drivers"
-	depends on VT
-
-config VGA_CONSOLE
-	bool "VGA text console"
-	help
-	  Saying Y here will allow you to use Linux in text mode through a
-	  display that complies with the generic VGA standard. Virtually
-	  everyone wants that.
-
-	  The program SVGATextMode can be used to utilize SVGA video cards to
-	  their full potential in text mode. Download it from
-	  <ftp://ibiblio.org/pub/Linux/utils/console/>.
-
-	  Say Y.
-
 source "drivers/video/Kconfig"
 
-config PCI_CONSOLE
-	bool
-	depends on FB
-	default y
-
-endmenu
-
-
 menu "Sound"
 
 config SOUND

arch/m68k/Kconfig

@@ -2309,15 +2309,8 @@ endmenu
 
 source "fs/Kconfig"
 
-
-menu "Console drivers"
-	depends on VT
-
 source "drivers/video/Kconfig"
 
-endmenu
-
-
 menu "Kernel hacking"
 
 config DEBUG_KERNEL

arch/m68knommu/Kconfig

@@ -672,43 +672,8 @@ source "drivers/media/Kconfig"
 
 source "fs/Kconfig"
 
-
-menu "Console drivers"
-	depends on VT
-
-config VGA_CONSOLE
-	bool "VGA text console"
-	help
-	  Saying Y here will allow you to use Linux in text mode through a
-	  display that complies with the generic VGA standard. Virtually
-	  everyone wants that.
-
-	  The program SVGATextMode can be used to utilize SVGA video cards to
-	  their full potential in text mode. Download it from
-	  <ftp://ibiblio.org/pub/Linux/utils/console/>.
-
-	  If unsure, say N.
-
-config VIDEO_SELECT
-	bool "Video mode selection support"
-	---help---
-	  This enables support for text mode selection on kernel startup. If
-	  you want to take advantage of some high-resolution text mode your
-	  card's BIOS offers, but the traditional Linux utilities like
-	  SVGATextMode don't, you can say Y here and set the mode using the
-	  "vga=" option from your boot loader (lilo or loadlin) or set
-	  "vga=ask" which brings up a video mode menu on kernel startup. (Try
-	  "man bootparam" or see the documentation of your boot loader about
-	  how to pass options to the kernel.)
-
-	  Read the file <file:Documentation/svga.txt> for more information
-	  about the Video mode selection support. If unsure, say N.
-
 source "drivers/video/Kconfig"
 
-endmenu
-
-
 menu "Sound"
 
 config SOUND

arch/mips/Kconfig

@@ -1115,28 +1115,6 @@ config VT_CONSOLE
 	bool "Support for console on virtual terminal"
 	depends on VT
 
-config SGI_NEWPORT_CONSOLE
-	tristate "SGI Newport Console support"
-	depends on VT
-	help
-	  Say Y here if you want the console on the Newport aka XL graphics
-	  card of your Indy.  Most people say Y here.
-
-config DUMMY_CONSOLE
-	bool
-	depends on VT && SGI_NEWPORT_CONSOLE!=y
-	default y
-
-config FONT_8x16
-	bool
-	depends on VT && SGI_NEWPORT_CONSOLE=y
-	default y
-	help
-	  This is the "high resolution" font for the VGA frame buffer (the one
-	  provided by the VGA text console 80x25 mode.
-
-	  If unsure, say Y.
-
 config PSMOUSE
 	bool "PS/2 mouse support (aka \"auxiliary device\")"
 	---help---
@@ -1192,48 +1170,8 @@ endmenu
 
 source "fs/Kconfig"
 
-
-menu "Console drivers"
-	depends on VT
-
-config VGA_CONSOLE
-	bool "VGA text console"
-	help
-	  Saying Y here will allow you to use Linux in text mode through a
-	  display that complies with the generic VGA standard. Virtually
-	  everyone wants that.
-
-	  The program SVGATextMode can be used to utilize SVGA video cards to
-	  their full potential in text mode. Download it from
-	  <ftp://ibiblio.org/pub/Linux/utils/console/>.
-
-	  Say Y.
-
-if EXPERIMENTAL
-
-config MDA_CONSOLE
-	tristate "MDA text console (dual-headed) (EXPERIMENTAL)"
-	---help---
-	  Say Y here if you have an old MDA or monochrome Hercules graphics
-	  adapter in your system acting as a second head ( = video card). You
-	  will then be able to use two monitors with your Linux system. Do not
-	  say Y here if your MDA card is the primary card in your system; the
-	  normal VGA driver will handle it.
-
-	  This driver is also available as a module ( = code which can be
-	  inserted and removed from the running kernel whenever you want).
-	  The module will be called mdacon.o. If you want to compile it as
-	  a module, say M here and read <file:Documentation/modules.txt>.
-
-	  If unsure, say N.
-
 source "drivers/video/Kconfig"
 
-endif
-
-endmenu
-
-
 menu "Sound"
 	depends on !DECSTATION
 

arch/mips64/Kconfig

@@ -593,31 +593,8 @@ source "drivers/media/Kconfig"
 
 source "fs/Kconfig"
 
-
-menu "Console drivers"
-	depends on VT
-
 source "drivers/video/Kconfig"
 
-config SGI_NEWPORT_CONSOLE
-	tristate "SGI Newport Console support"
-	depends on SGI_IP22
-	help
-	  Say Y here if you want the console on the Newport aka XL graphics
-	  card of your Indy.  Most people say Y here.
-
-config DUMMY_CONSOLE
-	bool
-	depends on SGI_IP22 && SGI_NEWPORT_CONSOLE!=y
-	default y
-
-config FONT_8x16
-	bool
-	depends on SGI_IP22 && SGI_NEWPORT_CONSOLE=y
-	default y
-
-endmenu
-
 config KCORE_ELF
 	bool
 	depends on PROC_FS

arch/parisc/Kconfig

@@ -335,38 +335,8 @@ source "drivers/media/Kconfig"
 
 source "fs/Kconfig"
 
-
-menu "Console drivers"
-	depends on VT
-
-config STI_CONSOLE
-	bool "STI console"
-	help
-	  STI refers to the HP "Standard Text Interface" which is a set of
-	  BIOS routines contained in a ROM chip in HP PA-RISC based machines.
-	  Enabling this option will give you an 8 color text console on
-	  most of the PA-RISC systems.
-	  Really old HP boxes may not have STI, in which case you must use the
-	  PDC console or your primary serial port as a console.
-	
-	  The text console uses a strange memory layout, and changing the 
-	  plane mask to create colored characters requires calls to the STI 
-	  routines. Because of that do not expect it to be actually very fast,
-	  but it is sufficient for basic text console functions, including fonts.
-	
-	  The alternative is to use your primary serial port as a console.
-	
-	  It is safe to enable this option, so you should probably say "Y".
-
-config DUMMY_CONSOLE
-	bool
-	depends on STI_CONSOLE || SERIAL_8250_CONSOLE
-	default y
-
 source "drivers/video/Kconfig"
 
-endmenu
-
 menu "Sound"
 
 config SOUND

arch/ppc/Kconfig

@@ -1054,11 +1054,6 @@ config CMDLINE
 	  some command-line options at build time by entering them here.  In
 	  most cases you will need to specify the root device here.
 
-config FB_CONSOLE
-	bool
-	depends on APUS
-	default y
-
 config AMIGA
 	bool
 	depends on APUS
@@ -1467,25 +1462,8 @@ source "net/irda/Kconfig"
 
 source "drivers/isdn/Kconfig"
 
-
-menu "Console drivers"
-
-config VGA_CONSOLE
-	bool "VGA text console"
-	depends on !4xx && !8xx
-	help
-	  Saying Y here will allow you to use Linux in text mode through a
-	  display that complies with the generic VGA standard.  This can be
-	  useful on PReP systems and IBM RS/6000 or pSeries machines but is of
-	  limited usefulness on Apple machines.
-
-	  Say N here if you have an Apple machine.
-
 source "drivers/video/Kconfig"
 
-endmenu
-
-
 menu "iSeries device drivers"
 	depends on PPC_ISERIES
 

arch/ppc64/Kconfig

@@ -414,15 +414,8 @@ source "drivers/media/Kconfig"
 
 source "fs/Kconfig"
 
-
-menu "Console drivers"
-	depends on VT
-
 source "drivers/video/Kconfig"
 
-endmenu
-
-
 menu "Sound"
 
 config SOUND

arch/sh/Kconfig

@@ -1190,63 +1190,8 @@ source "fs/Kconfig"
 
 source "drivers/media/Kconfig"
 
-
-menu "Console drivers"
-	depends on VT
-
-config VGA_CONSOLE
-	bool "VGA text console"
-	help
-	  Saying Y here will allow you to use Linux in text mode through a
-	  display that complies with the generic VGA standard. Virtually
-	  everyone wants that.
-
-	  The program SVGATextMode can be used to utilize SVGA video cards to
-	  their full potential in text mode. Download it from
-	  <ftp://ibiblio.org/pub/Linux/utils/console/>.
-
-	  Say Y.
-
-config VIDEO_SELECT
-	bool "Video mode selection support"
-	---help---
-	  This enables support for text mode selection on kernel startup. If
-	  you want to take advantage of some high-resolution text mode your
-	  card's BIOS offers, but the traditional Linux utilities like
-	  SVGATextMode don't, you can say Y here and set the mode using the
-	  "vga=" option from your boot loader (lilo or loadlin) or set
-	  "vga=ask" which brings up a video mode menu on kernel startup. (Try
-	  "man bootparam" or see the documentation of your boot loader about
-	  how to pass options to the kernel.)
-
-	  Read the file <file:Documentation/svga.txt> for more information
-	  about the Video mode selection support. If unsure, say N.
-
-if EXPERIMENTAL
-
-config MDA_CONSOLE
-	tristate "MDA text console (dual-headed) (EXPERIMENTAL)"
-	---help---
-	  Say Y here if you have an old MDA or monochrome Hercules graphics
-	  adapter in your system acting as a second head ( = video card). You
-	  will then be able to use two monitors with your Linux system. Do not
-	  say Y here if your MDA card is the primary card in your system; the
-	  normal VGA driver will handle it.
-
-	  This driver is also available as a module ( = code which can be
-	  inserted and removed from the running kernel whenever you want).
-	  The module will be called mdacon.o. If you want to compile it as
-	  a module, say M here and read <file:Documentation/modules.txt>.
-
-	  If unsure, say N.
-
 source "drivers/video/Kconfig"
 
-endif
-
-endmenu
-
-
 menu "Sound"
 
 config SOUND

arch/sparc/Kconfig

@@ -417,24 +417,8 @@ config PRINTER
 
 endmenu
 
-
-menu "Console drivers"
-
-config PROM_CONSOLE
-	bool "PROM console"
-	help
-	  Say Y to build a console driver for Sun machines that uses the
-	  terminal emulation built into their console PROMS.
-
-config DUMMY_CONSOLE
-	bool
-	depends on !PROM_CONSOLE
-	default y
-
 source "drivers/video/Kconfig"
 
-endmenu
-
 source "drivers/mtd/Kconfig"
 
 source "drivers/serial/Kconfig"

arch/sparc64/Kconfig

@@ -530,19 +530,8 @@ config WATCHDOG_RIO
 
 endmenu
 
-
-menu "Console drivers"
-
-config PROM_CONSOLE
-	bool "PROM console"
-	help
-	  Say Y to build a console driver for Sun machines that uses the
-	  terminal emulation built into their console PROMS.
-
 source "drivers/video/Kconfig"
 
-endmenu
-
 source "drivers/serial/Kconfig"
 
 source "drivers/sbus/char/Kconfig"

arch/v850/Kconfig

@@ -365,43 +365,8 @@ source "drivers/media/Kconfig"
 
 source "fs/Kconfig"
 
-
-menu "Console drivers"
-	depends on VT
-
-config VGA_CONSOLE
-	bool "VGA text console"
-	help
-	  Saying Y here will allow you to use Linux in text mode through a
-	  display that complies with the generic VGA standard. Virtually
-	  everyone wants that.
-
-	  The program SVGATextMode can be used to utilize SVGA video cards to
-	  their full potential in text mode. Download it from
-	  <ftp://ibiblio.org/pub/Linux/utils/console/>.
-
-	  If unsure, say N.
-
-config VIDEO_SELECT
-	bool "Video mode selection support"
-	---help---
-	  This enables support for text mode selection on kernel startup. If
-	  you want to take advantage of some high-resolution text mode your
-	  card's BIOS offers, but the traditional Linux utilities like
-	  SVGATextMode don't, you can say Y here and set the mode using the
-	  "vga=" option from your boot loader (lilo or loadlin) or set
-	  "vga=ask" which brings up a video mode menu on kernel startup. (Try
-	  "man bootparam" or see the documentation of your boot loader about
-	  how to pass options to the kernel.)
-
-	  Read the file <file:Documentation/svga.txt> for more information
-	  about the Video mode selection support. If unsure, say N.
-
 source "drivers/video/Kconfig"
 
-endmenu
-
-
 menu "Sound"
 
 config SOUND

arch/x86_64/Kconfig

@@ -588,63 +588,8 @@ source "drivers/media/Kconfig"
 
 source "fs/Kconfig"
 
-
-menu "Console drivers"
-	depends on VT
-
-config VGA_CONSOLE
-	bool "VGA text console"
-	help
-	  Saying Y here will allow you to use Linux in text mode through a
-	  display that complies with the generic VGA standard. Virtually
-	  everyone wants that.
-
-	  The program SVGATextMode can be used to utilize SVGA video cards to
-	  their full potential in text mode. Download it from
-	  <ftp://ibiblio.org/pub/Linux/utils/console/>.
-
-	  Say Y.
-
-config VIDEO_SELECT
-	bool "Video mode selection support"
-	---help---
-	  This enables support for text mode selection on kernel startup. If
-	  you want to take advantage of some high-resolution text mode your
-	  card's BIOS offers, but the traditional Linux utilities like
-	  SVGATextMode don't, you can say Y here and set the mode using the
-	  "vga=" option from your boot loader (lilo or loadlin) or set
-	  "vga=ask" which brings up a video mode menu on kernel startup. (Try
-	  "man bootparam" or see the documentation of your boot loader about
-	  how to pass options to the kernel.)
-
-	  Read the file <file:Documentation/svga.txt> for more information
-	  about the Video mode selection support. If unsure, say N.
-
-if EXPERIMENTAL
-
-config MDA_CONSOLE
-	tristate "MDA text console (dual-headed) (EXPERIMENTAL)"
-	---help---
-	  Say Y here if you have an old MDA or monochrome Hercules graphics
-	  adapter in your system acting as a second head ( = video card). You
-	  will then be able to use two monitors with your Linux system. Do not
-	  say Y here if your MDA card is the primary card in your system; the
-	  normal VGA driver will handle it.
-
-	  This driver is also available as a module ( = code which can be
-	  inserted and removed from the running kernel whenever you want).
-	  The module will be called mdacon.o. If you want to compile it as
-	  a module, say M here and read <file:Documentation/modules.txt>.
-
-	  If unsure, say N.
-
 source "drivers/video/Kconfig"
 
-endif
-
-endmenu
-
-
 menu "Sound"
 
 config SOUND

drivers/Makefile

@@ -21,7 +21,7 @@ obj-$(CONFIG_FC4)		+= fc4/
 obj-$(CONFIG_SCSI)		+= scsi/
 obj-$(CONFIG_FUSION)		+= message/
 obj-$(CONFIG_IEEE1394)		+= ieee1394/
-obj-y				+= cdrom/
+obj-y				+= cdrom/ video/
 obj-$(CONFIG_MTD)		+= mtd/
 obj-$(CONFIG_PCMCIA)		+= pcmcia/
 obj-$(CONFIG_DIO)		+= dio/
@@ -30,7 +30,6 @@ obj-$(CONFIG_ZORRO)		+= zorro/
 obj-$(CONFIG_ALL_PPC)		+= macintosh/
 obj-$(CONFIG_MAC)		+= macintosh/
 obj-$(CONFIG_SGI)		+= sgi/
-obj-$(CONFIG_VT)		+= video/
 obj-$(CONFIG_PARIDE) 		+= block/paride/
 obj-$(CONFIG_TC)		+= tc/
 obj-$(CONFIG_USB)		+= usb/

drivers/char/Makefile

@@ -12,7 +12,7 @@ obj-y	 += mem.o tty_io.o n_tty.o tty_ioctl.o pty.o misc.o random.o
 # All of the (potential) objects that export symbols.
 # This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
 
-export-objs     :=	busmouse.o vt.o generic_serial.o ip2main.o \
+export-objs     :=	busmouse.o vt.o generic_serial.o ip2main.o consolemap.o\
 			ite_gpio.o keyboard.o misc.o nvram.o random.o rtc.o \
 			selection.o sonypi.o sysrq.o tty_io.o tty_ioctl.o
 

drivers/char/consolemap.c

@@ -11,6 +11,8 @@
  * Fix bug in inverse translation. Stanislav Voronyi <stas@cnti.uanet.kharkov.ua>, Dec 1998
  */
 
+#include <linux/config.h>
+#include <linux/module.h>
 #include <linux/kd.h>
 #include <linux/errno.h>
 #include <linux/mm.h>
@@ -19,7 +21,6 @@
 #include <linux/tty.h>
 #include <asm/uaccess.h>
 #include <linux/consolemap.h>
-#include <linux/console_struct.h>
 #include <linux/vt_kern.h>
 
 static unsigned short translations[][256] = {
@@ -681,3 +682,5 @@ console_map_init(void)
 		if (vc_cons_allocated(i) && !*vc_cons[i].d->vc_uni_pagedir_loc)
 			con_set_default_unimap(i);
 }
+
+EXPORT_SYMBOL(con_copy_unimap);

drivers/char/keyboard.c

@@ -35,7 +35,6 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 
-#include <linux/console_struct.h>
 #include <linux/kbd_kern.h>
 #include <linux/kbd_diacr.h>
 #include <linux/vt_kern.h>

drivers/char/mem.c

@@ -33,12 +33,6 @@ extern int i2c_init_all(void);
 #ifdef CONFIG_FB
 extern void fbmem_init(void);
 #endif
-#ifdef CONFIG_PROM_CONSOLE
-extern void prom_con_init(void);
-#endif
-#ifdef CONFIG_MDA_CONSOLE
-extern void mda_console_init(void);
-#endif
 #if defined(CONFIG_S390_TAPE) && defined(CONFIG_S390_TAPE_CHAR)
 extern void tapechar_init(void);
 #endif
@@ -685,12 +679,6 @@ int __init chr_dev_init(void)
 #endif
 #if defined (CONFIG_FB)
 	fbmem_init();
-#endif
-#if defined (CONFIG_PROM_CONSOLE)
-	prom_con_init();
-#endif
-#if defined (CONFIG_MDA_CONSOLE)
-	mda_console_init();
 #endif
 	tty_init();
 #ifdef CONFIG_M68K_PRINTER

drivers/char/selection.c

@@ -22,7 +22,6 @@
 
 #include <linux/vt_kern.h>
 #include <linux/consolemap.h>
-#include <linux/console_struct.h>
 #include <linux/selection.h>
 
 #ifndef MIN

drivers/char/toshiba.c

@@ -210,7 +210,7 @@ static int tosh_emulate_fan(SMMRegisters *regs)
 /*
  * Put the laptop into System Management Mode
  */
-static int tosh_smm(SMMRegisters *regs)
+int tosh_smm(SMMRegisters *regs)
 {
 	int eax;
 

drivers/char/tty_io.c

@@ -1509,6 +1509,13 @@ static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
 		return -EFAULT;
 	if (!memcmp(&tmp_ws, &tty->winsize, sizeof(*arg)))
 		return 0;
+#ifdef CONFIG_VT
+	if (tty->driver.type == TTY_DRIVER_TYPE_CONSOLE) {
+		unsigned int currcons = minor(tty->device) - tty->driver.minor_start;
+		if (vc_resize(currcons, tmp_ws.ws_col, tmp_ws.ws_row))
+			return -ENXIO;
+	}
+#endif
 	if (tty->pgrp > 0)
 		kill_pg(tty->pgrp, SIGWINCH, 1);
 	if ((real_tty->pgrp != tty->pgrp) && (real_tty->pgrp > 0))

drivers/char/vc_screen.c

@@ -32,7 +32,6 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/vt_kern.h>
-#include <linux/console_struct.h>
 #include <linux/selection.h>
 #include <linux/kbd_kern.h>
 #include <linux/console.h>

drivers/char/vt.c

@@ -90,7 +90,6 @@
 #include <linux/devfs_fs_kernel.h>
 #include <linux/vt_kern.h>
 #include <linux/selection.h>
-#include <linux/console_struct.h>
 #include <linux/kbd_kern.h>
 #include <linux/consolemap.h>
 #include <linux/timer.h>
@@ -127,6 +126,15 @@ const struct consw *conswitchp;
 
 extern void vcs_make_devfs (unsigned int index, int unregister);
 extern void console_map_init(void);
+#ifdef CONFIG_PROM_CONSOLE
+extern void prom_con_init(void);
+#endif
+#ifdef CONFIG_MDA_CONSOLE
+extern void mda_console_init(void);
+#endif
+#ifdef CONFIG_FRAMEBUFFER_CONSOLE
+extern int fb_console_init(void);
+#endif
 
 static struct tty_struct *console_table[MAX_NR_CONSOLES];
 static struct termios *console_termios[MAX_NR_CONSOLES];
@@ -691,82 +699,83 @@ int vc_allocate(unsigned int currcons)	/* return 0 on success */
 	return 0;
 }
 
+inline int resize_screen(int currcons, int width, int height)
+{
+	/* Resizes the resolution of the display adapater */
+	int err = 0;
+
+	if (vcmode != KD_GRAPHICS && sw->con_resize)
+		err = sw->con_resize(vc_cons[currcons].d, width, height);
+	return err;
+}
+
 /*
  * Change # of rows and columns (0 means unchanged/the size of fg_console)
  * [this is to be used together with some user program
  * like resize that changes the hardware videomode]
  */
-int vc_resize(unsigned int lines, unsigned int cols,
-	      unsigned int first, unsigned int last)
-{
-	unsigned int cc, ll, ss, sr, todo = 0;
-	unsigned int currcons = fg_console, i;
-	unsigned short *newscreens[MAX_NR_CONSOLES];
-
-	cc = (cols ? cols : video_num_columns);
-	ll = (lines ? lines : video_num_lines);
-	sr = cc << 1;
-	ss = sr * ll;
-
- 	for (currcons = first; currcons <= last; currcons++) {
-		if (!vc_cons_allocated(currcons) ||
-		    (cc == video_num_columns && ll == video_num_lines))
-			newscreens[currcons] = NULL;
-		else {
-			unsigned short *p = (unsigned short *) kmalloc(ss, GFP_USER);
-			if (!p) {
-				for (i = first; i < currcons; i++)
-					if (newscreens[i])
-						kfree(newscreens[i]);
-				return -ENOMEM;
-			}
-			newscreens[currcons] = p;
-			todo++;
-		}
-	}
-	if (!todo)
+int vc_resize(int currcons, unsigned int cols, unsigned int lines)
+{
+	unsigned long old_origin, new_origin, new_scr_end, rlth, rrem, err = 0;
+	unsigned int old_cols, old_rows, old_row_size, old_screen_size;
+	unsigned int new_cols, new_rows, new_row_size, new_screen_size;
+	unsigned short *newscreen;
+
+	if (!vc_cons_allocated(currcons))
+		return -ENXIO;
+
+	new_cols = (cols ? cols : video_num_columns);
+	new_rows = (lines ? lines : video_num_lines);
+	new_row_size = new_cols << 1;
+	new_screen_size = new_row_size * new_rows;
+
+	if (new_cols == video_num_columns && new_rows == video_num_lines)
 		return 0;
 
-	for (currcons = first; currcons <= last; currcons++) {
-		unsigned int occ, oll, oss, osr;
-		unsigned long ol, nl, nlend, rlth, rrem;
-		if (!newscreens[currcons] || !vc_cons_allocated(currcons))
-			continue;
+	newscreen = (unsigned short *) kmalloc(new_screen_size, GFP_USER);
+	if (!newscreen)
+		return -ENOMEM;
+
+	old_rows = video_num_lines;
+	old_cols = video_num_columns;
+	old_row_size = video_size_row;
+	old_screen_size = screenbuf_size;
 
-		oll = video_num_lines;
-		occ = video_num_columns;
-		osr = video_size_row;
-		oss = screenbuf_size;
+	video_num_lines = new_rows;
+	video_num_columns = new_cols;
+	video_size_row = new_row_size;
+	screenbuf_size = new_screen_size;
 
-		video_num_lines = ll;
-		video_num_columns = cc;
-		video_size_row = sr;
-		screenbuf_size = ss;
+	err = resize_screen(currcons, new_cols, new_rows);
+	if (err)
+		return err;
 
-		rlth = min(osr, sr);
-		rrem = sr - rlth;
-		ol = origin;
-		nl = (long) newscreens[currcons];
-		nlend = nl + ss;
-		if (ll < oll)
-			ol += (oll - ll) * osr;
+	rlth = min(old_row_size, new_row_size);
+	rrem = new_row_size - rlth;
+	old_origin = origin;
+	new_origin = (long) newscreen;
+	new_scr_end = new_origin + new_screen_size;
+	if (new_rows < old_rows)
+		old_origin += (old_rows - new_rows) * old_row_size;
 
 	update_attr(currcons);
 
-		while (ol < scr_end) {
-			scr_memcpyw((unsigned short *) nl, (unsigned short *) ol, rlth);
+	while (old_origin < scr_end) {
+		scr_memcpyw((unsigned short *) new_origin, (unsigned short *) old_origin, rlth);
 		if (rrem)
-				scr_memsetw((void *)(nl + rlth), video_erase_char, rrem);
-			ol += osr;
-			nl += sr;
+			scr_memsetw((void *)(new_origin + rlth), video_erase_char, rrem);
+		old_origin += old_row_size;
+		new_origin += new_row_size;
 	}
-		if (nlend > nl)
-			scr_memsetw((void *) nl, video_erase_char, nlend - nl);
+	if (new_scr_end > new_origin)
+		scr_memsetw((void *) new_origin, video_erase_char, new_scr_end - new_origin);
 	if (kmalloced)
 		kfree(screenbuf);
-		screenbuf = newscreens[currcons];
+	screenbuf = newscreen;
 	kmalloced = 1;
-		screenbuf_size = ss;
+	screenbuf_size = new_screen_size;
+	if (IS_VISIBLE)
+		err = resize_screen(currcons, new_cols, new_rows);
 	set_origin(currcons);
 
 	/* do part of a reset_terminal() */
@@ -775,22 +784,21 @@ int vc_resize(unsigned int lines, unsigned int cols,
 	gotoxy(currcons, x, y);
 	save_cur(currcons);
 
-		if (console_table[currcons]) {
-			struct winsize ws, *cws = &console_table[currcons]->winsize;
+	if (vc_cons[currcons].d->vc_tty) {
+		struct winsize ws, *cws = &vc_cons[currcons].d->vc_tty->winsize;
+
 		memset(&ws, 0, sizeof(ws));
 		ws.ws_row = video_num_lines;
 		ws.ws_col = video_num_columns;
 		if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col) &&
-			    console_table[currcons]->pgrp > 0)
-				kill_pg(console_table[currcons]->pgrp, SIGWINCH, 1);
+		    vc_cons[currcons].d->vc_tty->pgrp > 0)
+			kill_pg(vc_cons[currcons].d->vc_tty->pgrp, SIGWINCH, 1);
 		*cws = ws;
 	}
 
 	if (IS_VISIBLE)
 		update_screen(currcons);
-	}
-
-	return 0;
+	return err;
 }
 
 
@@ -1200,7 +1208,7 @@ static void set_mode(int currcons, int on_off)
 			case 3:	/* 80/132 mode switch unimplemented */
 				deccolm = on_off;
 #if 0
-				(void) vc_resize(video_num_lines, deccolm ? 132 : 80);
+				(void) vc_resize(deccolm ? 132 : 80, video_num_lines);
 				/* this alone does not suffice; some user mode
 				   utility has to change the hardware regs */
 #endif
@@ -2525,6 +2533,15 @@ int __init vty_init(void)
 
 	kbd_init();
 	console_map_init();
+#ifdef CONFIG_PROM_CONSOLE
+	prom_con_init();
+#endif
+#ifdef CONFIG_MDA_CONSOLE
+	mda_console_init();
+#endif
+#ifdef CONFIG_FRAMEBUFFER_CONSOLE
+	fb_console_init();
+#endif	
 	con_init_devfs();
 	vcs_init();
 	return 0;
@@ -3021,10 +3038,15 @@ EXPORT_SYMBOL(default_grn);
 EXPORT_SYMBOL(default_blu);
 EXPORT_SYMBOL(video_font_height);
 EXPORT_SYMBOL(video_scan_lines);
+EXPORT_SYMBOL(vc_cons_allocated);
+EXPORT_SYMBOL(update_region);
+EXPORT_SYMBOL(redraw_screen);
 EXPORT_SYMBOL(vc_resize);
 EXPORT_SYMBOL(fg_console);
 EXPORT_SYMBOL(console_blank_hook);
+EXPORT_SYMBOL(console_blanked);
 EXPORT_SYMBOL(vt_cons);
+EXPORT_SYMBOL(vc_cons);
 #ifndef VT_SINGLE_DRIVER
 EXPORT_SYMBOL(take_over_console);
 EXPORT_SYMBOL(give_up_console);

drivers/char/vt_ioctl.c

@@ -810,7 +810,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
 		if (get_user(ll, &vtsizes->v_rows) ||
 		    get_user(cc, &vtsizes->v_cols))
 			return -EFAULT;
-		return vc_resize_all(ll, cc);
+		for (i = 0; i < MAX_NR_CONSOLES; i++)
+                        vc_resize(i, cc, ll);
+		return 0;
 	}
 
 	case VT_RESIZEX:
@@ -829,36 +831,32 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
 		__get_user(vcol, &vtconsize->v_vcol);
 		__get_user(ccol, &vtconsize->v_ccol);
 		vlin = vlin ? vlin : video_scan_lines;
-		if ( clin )
-		  {
-		    if ( ll )
-		      {
-			if ( ll != vlin/clin )
+		if (clin) {
+			if (ll) {
+				if (ll != vlin/clin)
 					return -EINVAL; /* Parameters don't add up */
-		      }
-		    else 
+			} else 
 				ll = vlin/clin;
 		}
-		if ( vcol && ccol )
-		  {
-		    if ( cc )
-		      {
-			if ( cc != vcol/ccol )
+		if (vcol && ccol) {
+			if (cc) {
+				if (cc != vcol/ccol)
 					return -EINVAL;
-		      }
-		    else
+			} else
 				cc = vcol/ccol;
 		}
 
-		if ( clin > 32 )
+		if (clin > 32)
 			return -EINVAL;
 		    
-		if ( vlin )
+		if (vlin)
 			video_scan_lines = vlin;
-		if ( clin )
+		if (clin)
 			video_font_height = clin;
 	
-		return vc_resize_all(ll, cc);
+		for (i = 0; i < MAX_NR_CONSOLES; i++)
+			vc_resize(i, cc, ll);
+  		return 0;
 	}
 
 	case PIO_FONT: {

drivers/video/Makefile

@@ -5,33 +5,15 @@
 # All of the (potential) objects that export symbols.
 # This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
 
-export-objs    	:= fbmem.o fbcmap.o fbcon.o fbmon.o modedb.o \
-		   fbcon-afb.o fbcon-ilbm.o fbcon-accel.o cyber2000fb.o \
-		   fbcon-iplan2p2.o fbcon-iplan2p4.o fbgen.o \
-		   fbcon-iplan2p8.o fbcon-vga-planes.o fbcon-cfb16.o \
-		   fbcon-cfb2.o fbcon-cfb24.o fbcon-cfb32.o fbcon-cfb4.o \
-		   fbcon-cfb8.o fbcon-mfb.o fbcon-hga.o
+export-objs    	:= fbmem.o fbcmap.o fbmon.o modedb.o softcursor.o cfbfillrect.o \
+		   cfbcopyarea.o cfbimgblt.o cyber2000fb.o vgastate.o
 
 # Each configuration option enables a list of files.
 
-obj-$(CONFIG_DUMMY_CONSOLE)       += dummycon.o
-obj-$(CONFIG_SGI_NEWPORT_CONSOLE) += newport_con.o
-obj-$(CONFIG_PROM_CONSOLE)        += promcon.o promcon_tbl.o
-obj-$(CONFIG_STI_CONSOLE)         += sticon.o sticon-bmode.o sticore.o
-obj-$(CONFIG_VGA_CONSOLE)         += vgacon.o
-obj-$(CONFIG_MDA_CONSOLE)         += mdacon.o
-
-obj-$(CONFIG_FONT_SUN8x16)        += font_sun8x16.o
-obj-$(CONFIG_FONT_SUN12x22)       += font_sun12x22.o
-obj-$(CONFIG_FONT_8x8)            += font_8x8.o
-obj-$(CONFIG_FONT_8x16)           += font_8x16.o
-obj-$(CONFIG_FONT_6x11)           += font_6x11.o
-obj-$(CONFIG_FONT_PEARL_8x8)      += font_pearl_8x8.o
-obj-$(CONFIG_FONT_ACORN_8x8)      += font_acorn_8x8.o
-obj-$(CONFIG_FONT_MINI_4x6)       += font_mini_4x6.o
+obj-$(CONFIG_VT)		  += console/
 
 # Add fbmon.o back into obj-$(CONFIG_FB) in 2.5.x
-obj-$(CONFIG_FB)                  += fbmem.o fbcmap.o modedb.o fbcon.o fonts.o fbgen.o
+obj-$(CONFIG_FB)                  += fbmem.o fbcmap.o modedb.o softcursor.o
 # Only include macmodes.o if we have FB support and are PPC
 ifeq ($(CONFIG_FB),y)
 obj-$(CONFIG_PPC)                 += macmodes.o
@@ -44,10 +26,10 @@ obj-$(CONFIG_FB_PM3)		  += pm3fb.o
 obj-$(CONFIG_FB_APOLLO)           += dnfb.o cfbfillrect.o cfbimgblt.o
 obj-$(CONFIG_FB_Q40)              += q40fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_ATARI)            += atafb.o
-obj-$(CONFIG_FB_ATY128)           += aty128fb.o
+obj-$(CONFIG_FB_ATY128)           += aty128fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_RADEON)		  += radeonfb.o
 obj-$(CONFIG_FB_NEOMAGIC)         += neofb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_IGA)              += igafb.o
+obj-$(CONFIG_FB_IGA)              += igafb.o cfbfillrect.o cfbcopyarea.o cfbimgblit.o
 obj-$(CONFIG_FB_CONTROL)          += controlfb.o
 obj-$(CONFIG_FB_PLATINUM)         += platinumfb.o
 obj-$(CONFIG_FB_VALKYRIE)         += valkyriefb.o
@@ -68,7 +50,8 @@ obj-$(CONFIG_FB_TRIDENT)	  += tridentfb.o
 obj-$(CONFIG_FB_S3TRIO)           += S3triofb.o
 obj-$(CONFIG_FB_TGA)              += tgafb.o
 obj-$(CONFIG_FB_VESA)             += vesafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o 
-obj-$(CONFIG_FB_VGA16)            += vga16fb.o fbcon-vga-planes.o
+obj-$(CONFIG_FB_VGA16)            += vga16fb.o cfbfillrect.o cfbcopyarea.o \
+	                             cfbimgblt.o vgastate.o 
 obj-$(CONFIG_FB_VIRGE)            += virgefb.o
 obj-$(CONFIG_FB_G364)             += g364fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_FM2)              += fm2fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
@@ -80,20 +63,21 @@ obj-$(CONFIG_FB_TCX)              += tcxfb.o sbusfb.o
 obj-$(CONFIG_FB_CGFOURTEEN)       += cgfourteenfb.o sbusfb.o
 obj-$(CONFIG_FB_P9100)            += p9100fb.o sbusfb.o
 obj-$(CONFIG_FB_LEO)              += leofb.o sbusfb.o
-obj-$(CONFIG_FB_STI)	          += stifb.o sticore.o
+obj-$(CONFIG_FB_STI)	          += stifb.o console/sticore.o
 obj-$(CONFIG_FB_PMAG_BA)          += pmag-ba-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_PMAGB_B)          += pmagb-b-fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_MAXINE)           += maxinefb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_TX3912)           += tx3912fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 
 obj-$(CONFIG_FB_MATROX)		  += matrox/
-obj-$(CONFIG_FB_RIVA)		  += riva/
+obj-$(CONFIG_FB_RIVA)		  += riva/ cfbfillrect.o cfbcopyarea.o \
+	                             cfbimgblt.o vgastate.o
 obj-$(CONFIG_FB_SIS)		  += sis/
 obj-$(CONFIG_FB_ATY)		  += aty/ cfbimgblt.o
 
 obj-$(CONFIG_FB_SUN3)             += sun3fb.o
 obj-$(CONFIG_FB_BWTWO)            += bwtwofb.o
-obj-$(CONFIG_FB_HGA)              += hgafb.o  
+obj-$(CONFIG_FB_HGA)              += hgafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o 
 obj-$(CONFIG_FB_SA1100)           += sa1100fb.o
 obj-$(CONFIG_FB_VIRTUAL)          += vfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o 
 obj-$(CONFIG_FB_HIT)              += hitfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
@@ -101,24 +85,6 @@ obj-$(CONFIG_FB_E1355)            += epson1355fb.o
 obj-$(CONFIG_FB_PVR2)             += pvr2fb.o
 obj-$(CONFIG_FB_VOODOO1)          += sstfb.o
 
-# Generic Low Level Drivers
-
-obj-$(CONFIG_FBCON_AFB)           += fbcon-afb.o
-obj-$(CONFIG_FBCON_CFB2)          += fbcon-cfb2.o
-obj-$(CONFIG_FBCON_CFB4)          += fbcon-cfb4.o
-obj-$(CONFIG_FBCON_CFB8)          += fbcon-cfb8.o
-obj-$(CONFIG_FBCON_CFB16)         += fbcon-cfb16.o
-obj-$(CONFIG_FBCON_CFB24)         += fbcon-cfb24.o
-obj-$(CONFIG_FBCON_CFB32)         += fbcon-cfb32.o
-obj-$(CONFIG_FBCON_ILBM)          += fbcon-ilbm.o
-obj-$(CONFIG_FBCON_IPLAN2P2)      += fbcon-iplan2p2.o
-obj-$(CONFIG_FBCON_IPLAN2P4)      += fbcon-iplan2p4.o
-obj-$(CONFIG_FBCON_IPLAN2P8)      += fbcon-iplan2p8.o
-obj-$(CONFIG_FBCON_MFB)           += fbcon-mfb.o
-obj-$(CONFIG_FBCON_HGA)           += fbcon-hga.o
-obj-$(CONFIG_FBCON_STI)           += fbcon-sti.o
-obj-$(CONFIG_FBCON_ACCEL)	  += fbcon-accel.o
-
 # Files generated that shall be removed upon make clean
 clean-files := promcon_tbl.c
 

drivers/video/S3triofb.c

@@ -542,7 +542,7 @@ static void __init s3triofb_of_init(struct device_node *dp)
 	return;
 
     printk("fb%d: S3 Trio frame buffer device on %s\n",
-	   GET_FB_IDX(fb_info.node), dp->full_name);
+	   minor(fb_info.node), dp->full_name);
 }
 
 

drivers/video/amifb.c

@@ -1771,7 +1771,7 @@ int __init amifb_init(void)
 	}
 
 	printk("fb%d: %s frame buffer device, using %ldK of video memory\n",
-	       GET_FB_IDX(fb_info.node), fb_info.modename,
+	       minor(fb_info.node), fb_info.modename,
 	       videomemorysize>>10);
 
 	return 0;

drivers/video/anakinfb.c

@@ -20,25 +20,22 @@
 
 #include <asm/io.h>
 
-#include <video/fbcon.h>
-
-static u32 colreg[16];
+static u32 colreg[17];
 static struct fb_info fb_info;
-static struct display display;
 
 static struct fb_var_screeninfo anakinfb_var = {
 	.xres 		= 400,
 	.yres 		= 234,
 	.xres_virtual 	= 400,
 	.yres_virtual 	= 234,
-	.bits_per_pixel =16,
+	.bits_per_pixel = 16,
 	.red 		= { 11, 5, 0 },
 	.green 		= {  5, 6, 0 }, 
 	.blue 		= {  0, 5, 0 },
-	.activate	FB_ACTIVATE_NOW,
-	.height		-1,
-	.width		-1,
-	.vmode		FB_VMODE_NONINTERLACED,
+	.activate	= FB_ACTIVATE_NOW,
+	.height		= -1,
+	.width		= -1,
+	.vmode		= FB_VMODE_NONINTERLACED,
 };
 
 static struct fb_fix_screeninfo anakinfb_fix = {
@@ -58,40 +55,30 @@ anakinfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 	if (regno > 15)
 		return 1;
 
-	colreg[regno] = (red & 0xf800) | (green & 0xfc00 >> 5) |
-			(blue & 0xf800 >> 11);
+	((u16 *)(info->pseudo_palette))[regno] = (red & 0xf800) | (green & 0xfc00 >> 5) | (blue & 0xf800 >> 11);
 	return 0;
 }
 
 static struct fb_ops anakinfb_ops = {
 	.owner		= THIS_MODULE,
-	.fb_set_var	= gen_set_var,
-	.fb_get_cmap	= gen_get_cmap,
-	.fb_set_cmap	= gen_set_cmap,
 	.fb_setcolreg	= anakinfb_setcolreg,
 	.fb_fillrect	= cfb_fillrect,
 	.fb_copyarea	= cfb_copyarea,
 	.fb_imageblit	= cfb_imageblit,
+	.fb_cursor	= soft_cursor,
 };
 
 int __init
 anakinfb_init(void)
 {
 	memset(&fb_info, 0, sizeof(struct fb_info));
-	memset(&display, 0, sizeof(struct display));
 
-	strcpy(fb_info.modename, anakinfb_fix.id);
 	fb_info.node = NODEV;
-	fb_info.currcon = -1;
 	fb_info.flags = FBINFO_FLAG_DEFAULT;
 	fb_info.fbops = &anakinfb_ops;
 	fb_info.var = anakinfb_var;
 	fb_info.fix = anakinfb_fix;
-	fb_info.disp = &display;
-	strcpy(fb_info.fontname, "VGA8x16");
-	fb_info.changevar = NULL;
-	fb_info.switch_con = gen_switch_con;
-	fb_info.updatevar = gen_update_var;
+	fb_info.psuedo_palette = colreg;
 	if (!(request_mem_region(VGA_START, VGA_SIZE, "vga")))
 		return -ENOMEM;
 	if (fb_info.screen_base = ioremap(VGA_START, VGA_SIZE)) {
@@ -100,10 +87,9 @@ anakinfb_init(void)
 	}
 
 	fb_alloc_cmap(&fb_info.cmap, 16, 0);
-	gen_set_disp(-1, &fb_info);
 
 	if (register_framebuffer(&fb_info) < 0) {
-		iounmap(display.screen_base);
+		iounmap(fb_info.screen_base);
 		release_mem_region(VGA_START, VGA_SIZE);
 		return -EINVAL;
 	}

drivers/video/atafb.c

@@ -2816,7 +2816,7 @@ int __init atafb_init(void)
 	   printk("   virtual %dx%d\n",
 			  disp.var.xres_virtual, disp.var.yres_virtual);
 	printk("fb%d: %s frame buffer device, using %dK of video memory\n",
-	       GET_FB_IDX(fb_info.node), fb_info.modename, screen_len>>10);
+	       minor(fb_info.node), fb_info.modename, screen_len>>10);
 
 	/* TODO: This driver cannot be unloaded yet */
 	MOD_INC_USE_COUNT;

drivers/video/aty/atyfb.h

@@ -3,8 +3,6 @@
  */
 
 #include <linux/config.h>
-#include <video/fbcon.h>
-
     /*
      *  Elements of the hardware specific atyfb_par structure
      */
@@ -59,19 +57,9 @@ union aty_pll {
      */
 
 struct aty_cursor {
-	int enable;
-	int on;
-	int vbl_cnt;
-	int blink_rate;
-	u32 offset;
-	struct {
-		u16 x, y;
-	} pos, hot, size;
-	u32 color[2];
 	u8 bits[8][64];
 	u8 mask[8][64];
 	u8 *ram;
-	struct timer_list *timer;
 };
 
 struct atyfb_par {
@@ -93,8 +81,6 @@ struct atyfb_par {
 	u8 blitter_may_be_busy;
 #ifdef __sparc__
 	struct pci_mmap_map *mmap_map;
-	int consolecnt;
-	int vtconsole;
 	u8 mmaped;
 	int open;
 #endif
@@ -251,11 +237,9 @@ extern void aty_calc_pll_ct(const struct fb_info *info,
      */
 
 extern struct aty_cursor *aty_init_cursor(struct fb_info *info);
-extern void atyfb_cursor(struct display *p, int mode, int x, int y);
+extern int atyfb_cursor(struct fb_info *info, struct fb_cursor *cursor);
 extern void aty_set_cursor_color(struct fb_info *info);
 extern void aty_set_cursor_shape(struct fb_info *info);
-extern int atyfb_set_font(struct display *d, int width, int height);
-
 
     /*
      *  Hardware acceleration

drivers/video/aty/atyfb_base.c

@@ -65,9 +65,6 @@
 #include <asm/io.h>
 #include <asm/uaccess.h>
 
-#include <video/fbcon.h>
-#include "../fbcon-accel.h"
-
 #include <video/mach64.h>
 #include "atyfb.h"
 
@@ -149,11 +146,11 @@ static int atyfb_check_var(struct fb_var_screeninfo *var,
 static int atyfb_set_par(struct fb_info *info); 
 static int atyfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 			   u_int transp, struct fb_info *info);
-static int atyfb_pan_display(struct fb_var_screeninfo *var, int con,
+static int atyfb_pan_display(struct fb_var_screeninfo *var,
 			     struct fb_info *info);
 static int atyfb_blank(int blank, struct fb_info *info);
 static int atyfb_ioctl(struct inode *inode, struct file *file, u_int cmd,
-		       u_long arg, int con, struct fb_info *info);
+		       u_long arg, struct fb_info *info);
 extern void atyfb_fillrect(struct fb_info *info, struct fb_fillrect *rect);
 extern void atyfb_copyarea(struct fb_info *info, struct fb_copyarea *area);
 extern void atyfb_imageblit(struct fb_info *info, struct fb_image *image);
@@ -161,7 +158,7 @@ extern void atyfb_imageblit(struct fb_info *info, struct fb_image *image);
 static int atyfb_mmap(struct fb_info *info, struct file *file,
 		      struct vm_area_struct *vma);
 #endif
-static int atyfb_rasterimg(struct fb_info *info, int start);
+static int atyfb_sync(struct fb_info *info);
 
     /*
      *  Internal routines
@@ -198,21 +195,12 @@ int atyfb_init(void);
 int atyfb_setup(char *);
 #endif
 
-int gen_get_var(struct fb_var_screeninfo *var, int con, struct fb_info *info)
-{
-        *var = info->var;
-        return 0;
-}
-
 static struct fb_ops atyfb_ops = {
 	.owner		= THIS_MODULE,
 	.fb_open	= atyfb_open,
 	.fb_release	= atyfb_release,
-	.fb_set_var	= gen_set_var,
 	.fb_check_var	= atyfb_check_var,
 	.fb_set_par	= atyfb_set_par,
-	.fb_get_cmap	= gen_get_cmap,
-	.fb_set_cmap	= gen_set_cmap,
 	.fb_setcolreg	= atyfb_setcolreg,
 	.fb_pan_display	= atyfb_pan_display,
 	.fb_blank	= atyfb_blank,
@@ -220,13 +208,13 @@ static struct fb_ops atyfb_ops = {
 	.fb_fillrect	= atyfb_fillrect,
 	.fb_copyarea	= atyfb_copyarea,
 	.fb_imageblit	= atyfb_imageblit,
+	.fb_cursor	= soft_cursor,
 #ifdef __sparc__
 	.fb_mmap	= atyfb_mmap,
 #endif
-	.fb_rasterimg	= atyfb_rasterimg,
+	.fb_sync	= atyfb_sync,
 };
 
-static char fontname[40] __initdata = { 0 };
 static char curblink __initdata = 1;
 static char noaccel __initdata = 0;
 static u32 default_vram __initdata = 0;
@@ -944,9 +932,6 @@ static int atyfb_open(struct fb_info *info, int user)
 	if (user) {
 		par->open++;
 		par->mmaped = 0;
-		par->vtconsole = -1;
-	} else {
-		par->consolecnt++;
 	}
 #endif
 	return (0);
@@ -973,9 +958,6 @@ static int atyfb_release(struct fb_info *info, int user)
 			int was_mmaped = par->mmaped;
 
 			par->mmaped = 0;
-			if (par->vtconsole != -1)
-				vt_cons[par->vtconsole]->vc_mode = KD_TEXT;
-			par->vtconsole = -1;
 
 			if (was_mmaped) {
 				struct fb_var_screeninfo var;
@@ -1005,8 +987,6 @@ static int atyfb_release(struct fb_info *info, int user)
 				gen_set_var(&var, -1, info);
 			}
 		}
-	} else {
-		par->consolecnt--;
 	} 
 #endif
 	return (0);
@@ -1018,7 +998,7 @@ static int atyfb_release(struct fb_info *info, int user)
      *  This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag
      */
 
-static int atyfb_pan_display(struct fb_var_screeninfo *var, int con,
+static int atyfb_pan_display(struct fb_var_screeninfo *var,
 			     struct fb_info *info)
 {
 	struct atyfb_par *par = (struct atyfb_par *) info->par;
@@ -1060,7 +1040,7 @@ struct atyclk {
 #endif
 
 static int atyfb_ioctl(struct inode *inode, struct file *file, u_int cmd,
-		       u_long arg, int con, struct fb_info *info)
+		       u_long arg, struct fb_info *info)
 {
 #if defined(__sparc__) || (defined(DEBUG) && defined(CONFIG_FB_ATY_CT))
 	struct atyfb_par *par = (struct atyfb_par *) info->par;
@@ -1150,7 +1130,7 @@ static int atyfb_ioctl(struct inode *inode, struct file *file, u_int cmd,
 	return 0;
 }
 
-static int atyfb_rasterimg(struct fb_info *info, int start)
+static int atyfb_sync(struct fb_info *info)
 {
 	struct atyfb_par *par = (struct atyfb_par *) info->par;
 
@@ -1228,18 +1208,8 @@ static int atyfb_mmap(struct fb_info *info, struct file *file,
 
 	vma->vm_flags |= VM_IO;
 
-	if (!par->mmaped) {
-		int lastconsole = 0;
-
-		if (info->display_fg)
-			lastconsole = info->display_fg->vc_num;
+	if (!par->mmaped)
 		par->mmaped = 1;
-		if (par->consolecnt
-		    && fb_display[lastconsole].fb_info == info) {
-			par->vtconsole = lastconsole;
-			vt_cons[lastconsole]->vc_mode = KD_GRAPHICS;
-		}
-	}
 	return 0;
 }
 
@@ -1562,7 +1532,6 @@ static int __init aty_init(struct fb_info *info, const char *name)
 	const char *chipname = NULL, *ramname = NULL, *xtal;
 	int j, pll, mclk, gtb_memsize;
 	struct fb_var_screeninfo var;
-	struct display *disp;
 	u32 chip_id, i;
 	u16 type;
 	u8 rev;
@@ -1843,18 +1812,9 @@ static int __init aty_init(struct fb_info *info, const char *name)
 	fb_memset((void *) info->screen_base, 0,
 		  info->fix.smem_len);
 
-	disp = info->disp;
-
-	strcpy(info->modename, info->fix.id);
 	info->node = NODEV;
 	info->fbops = &atyfb_ops;
-	info->disp = disp;
 	info->pseudo_palette = pseudo_palette;
-	info->currcon = -1;
-	strcpy(info->fontname, fontname);
-	info->changevar = NULL;
-	info->switch_con = gen_switch;
-	info->updatevar = gen_update_var;
 	info->flags = FBINFO_FLAG_DEFAULT;
 
 #ifdef CONFIG_PMAC_BACKLIGHT
@@ -1965,29 +1925,20 @@ static int __init aty_init(struct fb_info *info, const char *name)
 #endif
 
 #ifdef CONFIG_FB_ATY_CT
-	if (curblink && M64_HAS(INTEGRATED)) {
+	if (curblink && M64_HAS(INTEGRATED))
 		par->cursor = aty_init_cursor(info);
-		if (par->cursor) {
-			/*
-			disp->dispsw.cursor = atyfb_cursor;
-			disp->dispsw.set_font = atyfb_set_font;
-			*/
-		}
-	}
 #endif				/* CONFIG_FB_ATY_CT */
 	info->var = var;
 
 	fb_alloc_cmap(&info->cmap, 256, 0);
 
-	gen_set_var(&var, -1, info);
-
 	if (register_framebuffer(info) < 0)
 		return 0;
 
 	fb_list = info;
 
 	printk("fb%d: %s frame buffer device on %s\n",
-	       GET_FB_IDX(info->node), info->fix.id, name);
+	       minor(info->node), info->fix.id, name);
 	return 1;
 }
 
@@ -2028,16 +1979,13 @@ int __init atyfb_init(void)
 				continue;
 
 			info =
-			    kmalloc(sizeof(struct fb_info) +
-				    sizeof(struct display), GFP_ATOMIC);
+			    kmalloc(sizeof(struct fb_info), GFP_ATOMIC);
 			if (!info) {
 				printk
 				    ("atyfb_init: can't alloc fb_info\n");
 				return -ENXIO;
 			}
-			memset(info, 0,
-			       sizeof(struct fb_info) +
-			       sizeof(struct display));
+			memset(info, 0, sizeof(struct fb_info));
 
 			default_par =
 			    kmalloc(sizeof(struct atyfb_par), GFP_ATOMIC);
@@ -2049,7 +1997,6 @@ int __init atyfb_init(void)
 			}
 			memset(default_par, 0, sizeof(struct atyfb_par));
 
-			info->disp = (struct display *) (info + 1);
 			info->fix = atyfb_fix;
 			info->par = default_par;
 
@@ -2460,17 +2407,7 @@ int __init atyfb_setup(char *options)
 		return 0;
 
 	while ((this_opt = strsep(&options, ",")) != NULL) {
-		if (!strncmp(this_opt, "font:", 5)) {
-			char *p;
-			int i;
-
-			p = this_opt + 5;
-			for (i = 0; i < sizeof(fontname) - 1; i++)
-				if (!*p || *p == ' ' || *p == ',')
-					break;
-			memcpy(fontname, this_opt + 5, i);
-			fontname[i] = 0;
-		} else if (!strncmp(this_opt, "noblink", 7)) {
+		if (!strncmp(this_opt, "noblink", 7)) {
 			curblink = 0;
 		} else if (!strncmp(this_opt, "noaccel", 7)) {
 			noaccel = 1;
@@ -2694,12 +2631,8 @@ void cleanup_module(void)
 		iounmap(info->cursor->ram);
 #endif
 #endif
-
-	if (info->cursor) {
-		if (info->cursor->timer)
-			kfree(info->cursor->timer);
+	if (info->cursor)
 		kfree(info->cursor);
-	}
 #ifdef __sparc__
 	if (par->mmap_map)
 		kfree(par->mmap_map);

drivers/video/aty/mach64_ct.c

@@ -7,8 +7,6 @@
 
 #include <asm/io.h>
 
-#include <video/fbcon.h>
-
 #include <video/mach64.h>
 #include "atyfb.h"
 

drivers/video/aty/mach64_cursor.c

@@ -11,8 +11,6 @@
 #include <asm/io.h>
 #include <asm/uaccess.h>
 
-#include <video/fbcon.h>
-
 #ifdef __sparc__
 #include <asm/pbm.h>
 #include <asm/fbio.h>
@@ -21,11 +19,6 @@
 #include <video/mach64.h>
 #include "atyfb.h"
 
-
-#define DEFAULT_CURSOR_BLINK_RATE	(20)
-#define CURSOR_DRAW_DELAY		(2)
-
-
     /*
      *  Hardware Cursor support.
      */
@@ -51,50 +44,48 @@ void aty_set_cursor_color(struct fb_info *info)
 	const u8 *red = cursor_color_map;
 	const u8 *green = cursor_color_map;
 	const u8 *blue = cursor_color_map;
-	int i;
+	u32 fg_color, bg_color;
 
 	if (!c)
 		return;
 
 #ifdef __sparc__
-	if (par->mmaped && (!info->display_fg
-			   || info->display_fg->vc_num ==
-			   par->vtconsole))
+	if (par->mmaped)
 		return;
 #endif
+	fg_color = (u32) red[0] << 24;
+	fg_color |= (u32) green[0] << 16;
+	fg_color |= (u32) blue[0] << 8;
+	fg_color |= (u32) pixel[0];
 
-	for (i = 0; i < 2; i++) {
-		c->color[i] = (u32) red[i] << 24;
-		c->color[i] |= (u32) green[i] << 16;
-		c->color[i] |= (u32) blue[i] << 8;
-		c->color[i] |= (u32) pixel[i];
-	}
+	bg_color = (u32) red[1] << 24;
+	bg_color |= (u32) green[1] << 16;
+	bg_color |= (u32) blue[1] << 8;
+	bg_color |= (u32) pixel[1];
 
 	wait_for_fifo(2, par);
-	aty_st_le32(CUR_CLR0, c->color[0], par);
-	aty_st_le32(CUR_CLR1, c->color[1], par);
+	aty_st_le32(CUR_CLR0, fg_color, par);
+	aty_st_le32(CUR_CLR1, bg_color, par);
 }
 
 void aty_set_cursor_shape(struct fb_info *info)
 {
 	struct atyfb_par *par = (struct atyfb_par *) info->par;
+	struct fb_cursor *cursor = &info->cursor;
 	struct aty_cursor *c = par->cursor;
 	u8 *ram, m, b;
 	int x, y;
 
 	if (!c)
 		return;
-
 #ifdef __sparc__
-	if (par->mmaped && (!info->display_fg
-			   || info->display_fg->vc_num ==
-			   par->vtconsole))
+	if (par->mmaped)
 		return;
 #endif
 
 	ram = c->ram;
-	for (y = 0; y < c->size.y; y++) {
-		for (x = 0; x < c->size.x >> 2; x++) {
+	for (y = 0; y < cursor->image.height; y++) {
+		for (x = 0; x < cursor->image.width >> 2; x++) {
 			m = c->mask[x][y];
 			b = c->bits[x][y];
 			fb_writeb(cursor_mask_lookup[m >> 4] |
@@ -108,12 +99,13 @@ void aty_set_cursor_shape(struct fb_info *info)
 			fb_writeb(0xaa, ram++);
 		}
 	}
-	fb_memset(ram, 0xaa, (64 - c->size.y) * 16);
+	fb_memset(ram, 0xaa, (64 - cursor->image.height) * 16);
 }
 
-static void aty_set_cursor(struct fb_info *info, int on)
+static void aty_set_cursor(struct fb_info *info)
 {
 	struct atyfb_par *par = (struct atyfb_par *) info->par;
+	struct fb_cursor *cursor = &info->cursor;
 	struct aty_cursor *c = par->cursor;
 	u16 xoff, yoff;
 	int x, y;
@@ -122,14 +114,12 @@ static void aty_set_cursor(struct fb_info *info, int on)
 		return;
 
 #ifdef __sparc__
-	if (par->mmaped && (!info->display_fg
-			   || info->display_fg->vc_num ==
-			   par->vtconsole))
+	if (par->mmaped)
 		return;
 #endif
 
-	if (on) {
-		x = c->pos.x - c->hot.x - info->var.xoffset;
+	if (cursor->enable) {
+		x = cursor->image.dx - cursor->hot.x - info->var.xoffset;
 		if (x < 0) {
 			xoff = -x;
 			x = 0;
@@ -137,7 +127,7 @@ static void aty_set_cursor(struct fb_info *info, int on)
 			xoff = 0;
 		}
 
-		y = c->pos.y - c->hot.y - info->var.yoffset;
+		y = cursor->image.dy - cursor->hot.y - info->var.yoffset;
 		if (y < 0) {
 			yoff = -y;
 			y = 0;
@@ -146,10 +136,10 @@ static void aty_set_cursor(struct fb_info *info, int on)
 		}
 
 		wait_for_fifo(4, par);
-		aty_st_le32(CUR_OFFSET, (c->offset >> 3) + (yoff << 1),
+		aty_st_le32(CUR_OFFSET, (info->fix.smem_len >> 3) + (yoff << 1),
 			    par);
 		aty_st_le32(CUR_HORZ_VERT_OFF,
-			    ((u32) (64 - c->size.y + yoff) << 16) | xoff,
+			    ((u32) (64 - cursor->image.height + yoff) << 16) | xoff,
 			    par);
 		aty_st_le32(CUR_HORZ_VERT_POSN, ((u32) y << 16) | x, par);
 		aty_st_le32(GEN_TEST_CNTL, aty_ld_le32(GEN_TEST_CNTL, par)
@@ -164,70 +154,25 @@ static void aty_set_cursor(struct fb_info *info, int on)
 		wait_for_idle(par);
 }
 
-static void aty_cursor_timer_handler(unsigned long dev_addr)
-{
-	struct fb_info *info = (struct fb_info *) dev_addr;
-	struct atyfb_par *par = (struct atyfb_par *) info->par;
-
-	if (!par->cursor)
-		return;
-
-	if (!par->cursor->enable)
-		goto out;
-
-	if (par->cursor->vbl_cnt && --par->cursor->vbl_cnt == 0) {
-		par->cursor->on ^= 1;
-		aty_set_cursor(info, par->cursor->on);
-		par->cursor->vbl_cnt = par->cursor->blink_rate;
-	}
-
-      out:
-	par->cursor->timer->expires = jiffies + (HZ / 50);
-	add_timer(par->cursor->timer);
-}
-
-void atyfb_cursor(struct display *p, int mode, int x, int y)
+int atyfb_cursor(struct fb_info *info, struct fb_cursor *cursor)
 {
-	struct fb_info *info = p->fb_info;
 	struct atyfb_par *par = (struct atyfb_par *) info->par;
 	struct aty_cursor *c = par->cursor;
 
 	if (!c)
-		return;
+		return -1;
 
 #ifdef __sparc__
-	if (par->mmaped && (!info->display_fg
-			   || info->display_fg->vc_num ==
-			   par->vtconsole))
+	if (par->mmaped)
 		return;
 #endif
 
-	x *= fontwidth(p);
-	y *= fontheight(p);
-	if (c->pos.x == x && c->pos.y == y
-	    && (mode == CM_ERASE) == !c->enable)
-		return;
+	aty_set_cursor(info);
+	cursor->image.dx = info->cursor.image.dx;
+	cursor->image.dy = info->cursor.image.dy;
 
-	c->enable = 0;
-	if (c->on)
-		aty_set_cursor(info, 0);
-	c->pos.x = x;
-	c->pos.y = y;
-
-	switch (mode) {
-	case CM_ERASE:
-		c->on = 0;
-		break;
-
-	case CM_DRAW:
-	case CM_MOVE:
-		if (c->on)
-			aty_set_cursor(info, 1);
-		else
-			c->vbl_cnt = CURSOR_DRAW_DELAY;
-		c->enable = 1;
-		break;
-	}
+	aty_set_cursor(info);
+	return 0;
 }
 
 struct aty_cursor *__init aty_init_cursor(struct fb_info *info)
@@ -240,47 +185,31 @@ struct aty_cursor *__init aty_init_cursor(struct fb_info *info)
 		return 0;
 	memset(cursor, 0, sizeof(*cursor));
 
-	cursor->timer = kmalloc(sizeof(*cursor->timer), GFP_KERNEL);
-	if (!cursor->timer) {
-		kfree(cursor);
-		return 0;
-	}
-	memset(cursor->timer, 0, sizeof(*cursor->timer));
-
-	cursor->blink_rate = DEFAULT_CURSOR_BLINK_RATE;
 	info->fix.smem_len -= PAGE_SIZE;
-	cursor->offset = info->fix.smem_len;
 
 #ifdef __sparc__
-	addr = (unsigned long) info->screen_base - 0x800000 + cursor->offset;
+	addr = info->screen_base - 0x800000 + info->fix.smem_len;
 	cursor->ram = (u8 *) addr;
 #else
 #ifdef __BIG_ENDIAN
-	addr = info->fix.smem_start - 0x800000 + cursor->offset;
+	addr = info->fix.smem_start - 0x800000 + info->fix.smem_len;
 	cursor->ram = (u8 *) ioremap(addr, 1024);
 #else
-	addr = (unsigned long) info->screen_base + cursor->offset;
+	addr = (unsigned long) info->screen_base + info->fix.smem_len;
 	cursor->ram = (u8 *) addr;
 #endif
 #endif
-
 	if (!cursor->ram) {
 		kfree(cursor);
 		return NULL;
 	}
-
-	init_timer(cursor->timer);
-	cursor->timer->expires = jiffies + (HZ / 50);
-	cursor->timer->data = (unsigned long) info;
-	cursor->timer->function = aty_cursor_timer_handler;
-	add_timer(cursor->timer);
 	return cursor;
 }
 
-int atyfb_set_font(struct display *d, int width, int height)
+int atyfb_set_font(struct fb_info *info, int width, int height)
 {
-	struct fb_info *info = d->fb_info;
 	struct atyfb_par *par = (struct atyfb_par *) info->par;
+	struct fb_cursor *cursor = &info->cursor;
 	struct aty_cursor *c = par->cursor;
 	int i, j;
 
@@ -290,10 +219,10 @@ int atyfb_set_font(struct display *d, int width, int height)
 			height = 16;
 		}
 
-		c->hot.x = 0;
-		c->hot.y = 0;
-		c->size.x = width;
-		c->size.y = height;
+		cursor->hot.x = 0;
+		cursor->hot.y = 0;
+		cursor->image.width = width;
+		cursor->image.height = height;
 
 		memset(c->bits, 0xff, sizeof(c->bits));
 		memset(c->mask, 0, sizeof(c->mask));

drivers/video/aty/mach64_gx.c

@@ -9,8 +9,6 @@
 
 #include <asm/io.h>
 
-#include <video/fbcon.h>
-
 #include <video/mach64.h>
 #include "atyfb.h"
 

drivers/video/chipsfb.c

@@ -562,7 +562,7 @@ static void __init init_chips(struct fb_info_chips *p)
 	}
 
 	printk("fb%d: Chips 65550 frame buffer (%dK RAM detected)\n",
-		GET_FB_IDX(p->info.node), p->fix.smem_len / 1024);
+		minor(p->info.node), p->fix.smem_len / 1024);
 
 	chips_hw_init(p);
 

drivers/video/dummycon.c → drivers/video/console/dummycon.c

@@ -9,7 +9,6 @@
 #include <linux/kdev_t.h>
 #include <linux/tty.h>
 #include <linux/console.h>
-#include <linux/console_struct.h>
 #include <linux/vt_kern.h>
 #include <linux/init.h>
 
@@ -33,14 +32,14 @@ static const char *dummycon_startup(void)
     return "dummy device";
 }
 
-static void dummycon_init(struct vc_data *conp, int init)
+static void dummycon_init(struct vc_data *vc, int init)
 {
-    conp->vc_can_do_color = 1;
+    vc->vc_can_do_color = 1;
     if (init) {
-	conp->vc_cols = DUMMY_COLUMNS;
-	conp->vc_rows = DUMMY_ROWS;
+	vc->vc_cols = DUMMY_COLUMNS;
+	vc->vc_rows = DUMMY_ROWS;
     } else
-	vc_resize_con(DUMMY_ROWS, DUMMY_COLUMNS, conp->vc_num);
+	vc_resize(vc->vc_num, DUMMY_COLUMNS, DUMMY_ROWS);
 }
 
 static int dummycon_dummy(void)

drivers/video/font_sun12x22.c → drivers/video/console/font_sun12x22.c

-#include <video/font.h>
+#include "font.h"
 
 #define FONTDATAMAX 11264
 
@@ -6206,7 +6206,7 @@ static unsigned char fontdata_sun12x22[FONTDATAMAX] = {
 };
 
 
-struct fbcon_font_desc font_sun_12x22 = {
+struct font_desc font_sun_12x22 = {
 	SUN12x22_IDX,
 	"SUN12x22",
 	12,