comedi: ni_6527: Fix coding style - use BIT macro

BIT macro is used for defining BIT location instead of
shifting operator - coding style issue
Signed-off-by: Ranjith Thangavel <ranjithece24@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/ni_6527.c

@@ -42,24 +42,24 @@
 #define NI6527_DO_REG(x)		(0x03 + (x))
 #define NI6527_ID_REG			0x06
 #define NI6527_CLR_REG			0x07
-#define NI6527_CLR_EDGE			(1 << 3)
-#define NI6527_CLR_OVERFLOW		(1 << 2)
-#define NI6527_CLR_FILT			(1 << 1)
-#define NI6527_CLR_INTERVAL		(1 << 0)
+#define NI6527_CLR_EDGE			BIT(3)
+#define NI6527_CLR_OVERFLOW		BIT(2)
+#define NI6527_CLR_FILT			BIT(1)
+#define NI6527_CLR_INTERVAL		BIT(0)
 #define NI6527_CLR_IRQS			(NI6527_CLR_EDGE | NI6527_CLR_OVERFLOW)
 #define NI6527_CLR_RESET_FILT		(NI6527_CLR_FILT | NI6527_CLR_INTERVAL)
 #define NI6527_FILT_INTERVAL_REG(x)	(0x08 + (x))
 #define NI6527_FILT_ENA_REG(x)		(0x0c + (x))
 #define NI6527_STATUS_REG		0x14
-#define NI6527_STATUS_IRQ		(1 << 2)
-#define NI6527_STATUS_OVERFLOW		(1 << 1)
-#define NI6527_STATUS_EDGE		(1 << 0)
+#define NI6527_STATUS_IRQ		BIT(2)
+#define NI6527_STATUS_OVERFLOW		BIT(1)
+#define NI6527_STATUS_EDGE		BIT(0)
 #define NI6527_CTRL_REG			0x15
-#define NI6527_CTRL_FALLING		(1 << 4)
-#define NI6527_CTRL_RISING		(1 << 3)
-#define NI6527_CTRL_IRQ			(1 << 2)
-#define NI6527_CTRL_OVERFLOW		(1 << 1)
-#define NI6527_CTRL_EDGE		(1 << 0)
+#define NI6527_CTRL_FALLING		BIT(4)
+#define NI6527_CTRL_RISING		BIT(3)
+#define NI6527_CTRL_IRQ			BIT(2)
+#define NI6527_CTRL_OVERFLOW		BIT(1)
+#define NI6527_CTRL_EDGE		BIT(0)
 #define NI6527_CTRL_DISABLE_IRQS	0
 #define NI6527_CTRL_ENABLE_IRQS		(NI6527_CTRL_FALLING | \
 					 NI6527_CTRL_RISING | \