Commit d0eb6334 authored by Daniel Halperin's avatar Daniel Halperin Committed by Wey-Yi Guy

iwlwifi: cleanup and bugfix tx aggregation code

Since the driver split, there's no need for no_agg_framecnt_info since
all devices have this set to false. Secondly, the compressed block ack
handling code was broken. Fix this.

(1) A shift less than zero simply implies that the buffer wrapped, this
is expected. Remove the incorrect comment.

(2) The (agg->frame_count > (64-sh)) condition can happen if the last
frame is dropped. E.g., if I send 7 frames and the 6th is received but
the 7th is lost, the other side may only shift the window 6, not 7
frames since the last bit is a 0. This is perfectly fine behavior and
doesn't invalidate the feedback.

(3) Store the feedback from a Compressed BA in the first newly received
frame, rather than the start of the window. This way it will get
processed by the rate selection code. Feedback stored in a non-received
frame is likely to get overwritten by the retransmission.
    This is based on the approach taken by minstrel_ht.
Signed-off-by: default avatarDaniel Halperin <dhalperi@cs.washington.edu>
Signed-off-by: default avatarWey-Yi Guy <wey-yi.w.guy@intel.com>
parent 374920cb
......@@ -1263,11 +1263,11 @@ static int iwlagn_tx_status_reply_compressed_ba(struct iwl_priv *priv,
struct iwl_compressed_ba_resp *ba_resp)
{
int i, sh, ack;
int sh;
u16 seq_ctl = le16_to_cpu(ba_resp->seq_ctl);
u16 scd_flow = le16_to_cpu(ba_resp->scd_flow);
int successes = 0;
struct ieee80211_tx_info *info;
u64 bitmap, sent_bitmap;
if (unlikely(!agg->wait_for_ba)) {
if (unlikely(ba_resp->bitmap))
......@@ -1281,18 +1281,17 @@ static int iwlagn_tx_status_reply_compressed_ba(struct iwl_priv *priv,
/* Calculate shift to align block-ack bits with our Tx window bits */
sh = agg->start_idx - SEQ_TO_INDEX(seq_ctl >> 4);
if (sh < 0) /* tbw something is wrong with indices */
if (sh < 0)
sh += 0x100;
if (agg->frame_count > (64 - sh)) {
IWL_DEBUG_TX_REPLY(priv, "more frames than bitmap size");
return -1;
}
if (!priv->cfg->base_params->no_agg_framecnt_info && ba_resp->txed) {
/*
* sent and ack information provided by uCode
* use it instead of figure out ourself
* Check for success or failure according to the
* transmitted bitmap and block-ack bitmap
*/
bitmap = le64_to_cpu(ba_resp->bitmap) >> sh;
sent_bitmap = bitmap & agg->bitmap;
/* Sanity check values reported by uCode */
if (ba_resp->txed_2_done > ba_resp->txed) {
IWL_DEBUG_TX_REPLY(priv,
"bogus sent(%d) and ack(%d) count\n",
......@@ -1305,46 +1304,19 @@ static int iwlagn_tx_status_reply_compressed_ba(struct iwl_priv *priv,
}
IWL_DEBUG_HT(priv, "agg frames sent:%d, acked:%d\n",
ba_resp->txed, ba_resp->txed_2_done);
} else {
u64 bitmap, sent_bitmap;
/* don't use 64-bit values for now */
bitmap = le64_to_cpu(ba_resp->bitmap) >> sh;
/* check for success or failure according to the
* transmitted bitmap and block-ack bitmap */
sent_bitmap = bitmap & agg->bitmap;
/* For each frame attempted in aggregation,
* update driver's record of tx frame's status. */
i = 0;
while (sent_bitmap) {
ack = sent_bitmap & 1ULL;
successes += ack;
IWL_DEBUG_TX_REPLY(priv, "%s ON i=%d idx=%d raw=%d\n",
ack ? "ACK" : "NACK", i,
(agg->start_idx + i) & 0xff,
agg->start_idx + i);
/* Find the first ACKed frame to store the TX status */
while (sent_bitmap && !(sent_bitmap & 1)) {
agg->start_idx = (agg->start_idx + 1) & 0xff;
sent_bitmap >>= 1;
++i;
}
IWL_DEBUG_TX_REPLY(priv, "Bitmap %llx\n",
(unsigned long long)bitmap);
}
info = IEEE80211_SKB_CB(priv->txq[scd_flow].txb[agg->start_idx].skb);
memset(&info->status, 0, sizeof(info->status));
info->flags |= IEEE80211_TX_STAT_ACK;
info->flags |= IEEE80211_TX_STAT_AMPDU;
if (!priv->cfg->base_params->no_agg_framecnt_info && ba_resp->txed) {
info->status.ampdu_ack_len = ba_resp->txed_2_done;
info->status.ampdu_len = ba_resp->txed;
} else {
info->status.ampdu_ack_len = successes;
info->status.ampdu_len = agg->frame_count;
}
iwlagn_hwrate_to_tx_control(priv, agg->rate_n_flags, info);
return 0;
......
......@@ -281,8 +281,6 @@ struct iwl_mod_params {
* @chain_noise_calib_by_driver: driver has the capability to perform
* chain noise calibration operation
* @shadow_reg_enable: HW shadhow register bit
* @no_agg_framecnt_info: uCode do not provide aggregation frame count
* information
*/
struct iwl_base_params {
int eeprom_size;
......@@ -312,7 +310,6 @@ struct iwl_base_params {
const bool sensitivity_calib_by_driver;
const bool chain_noise_calib_by_driver;
const bool shadow_reg_enable;
const bool no_agg_framecnt_info;
};
/*
* @advanced_bt_coexist: support advanced bt coexist
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment