Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "MIPS updates:

   - All the things that didn't make 3.10.
   - Removes the Windriver PPMC platform.  Nobody will miss it.
   - Remove a workaround from kernel/irq/irqdomain.c which was there
     exclusivly for MIPS.  Patch by Grant Likely.
   - More small improvments for the SEAD 3 platform
   - Improvments on the BMIPS / SMP support for the BCM63xx series.
   - Various cleanups of dead leftovers.
   - Platform support for the Cavium Octeon-based EdgeRouter Lite.

  Two large KVM patchsets didn't make it for this pull request because
  their respective authors are vacationing"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits)
  MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER
  MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions
  MIPS: SEAD3: Disable L2 cache on SEAD-3.
  MIPS: BCM63xx: Enable second core SMP on BCM6328 if available
  MIPS: BCM63xx: Add SMP support to prom.c
  MIPS: define write{b,w,l,q}_relaxed
  MIPS: Expose missing pci_io{map,unmap} declarations
  MIPS: Malta: Update GCMP detection.
  Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET"
  MIPS: APSP: Remove <asm/kspd.h>
  SSB: Kconfig: Amend SSB_EMBEDDED dependencies
  MIPS: microMIPS: Fix improper definition of ISA exception bit.
  MIPS: Don't try to decode microMIPS branch instructions where they cannot exist.
  MIPS: Declare emulate_load_store_microMIPS as a static function.
  MIPS: Fix typos and cleanup comment
  MIPS: Cleanup indentation and whitespace
  MIPS: BMIPS: support booting from physical CPU other than 0
  MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS
  MIPS: GIC: Fix gic_set_affinity infinite loop
  MIPS: Don't save/restore OCTEON wide multiplier state on syscalls.
  ...

arch/mips/Kbuild.platforms

@@ -30,7 +30,6 @@ platforms += sibyte
 platforms += sni
 platforms += txx9
 platforms += vr41xx
-platforms += wrppmc
 
 # include the platform specific files
 include $(patsubst %, $(srctree)/arch/mips/%/Platform, $(platforms))

arch/mips/Kconfig

 config MIPS
 	bool
 	default y
+	select HAVE_CONTEXT_TRACKING
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_IDE
 	select HAVE_OPROFILE
@@ -27,6 +28,7 @@ config MIPS
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
+	select GENERIC_PCI_IOMAP
 	select HAVE_ARCH_JUMP_LABEL
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select IRQ_FORCED_THREADING
@@ -46,9 +48,6 @@ config MIPS
 
 menu "Machine selection"
 
-config ZONE_DMA
-	bool
-
 choice
 	prompt "System type"
 	default SGI_IP22
@@ -124,11 +123,14 @@ config BCM47XX
 
 config BCM63XX
 	bool "Broadcom BCM63XX based boards"
+	select BOOT_RAW
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select IRQ_CPU
 	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_BMIPS4350 if !BCM63XX_CPU_6338 && !BCM63XX_CPU_6345 && !BCM63XX_CPU_6348
+	select NR_CPUS_DEFAULT_2
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
@@ -341,7 +343,6 @@ config MIPS_SEAD3
 	select DMA_NONCOHERENT
 	select IRQ_CPU
 	select IRQ_GIC
-	select MIPS_CPU_SCACHE
 	select MIPS_MSC
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
@@ -420,7 +421,6 @@ config POWERTV
 	select CSRC_POWERTV
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
-	select SYS_HAS_EARLY_PRINTK
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
@@ -713,46 +713,8 @@ config MIKROTIK_RB532
 	  Support the Mikrotik(tm) RouterBoard 532 series,
 	  based on the IDT RC32434 SoC.
 
-config WR_PPMC
-	bool "Wind River PPMC board"
-	select CEVT_R4K
-	select CSRC_R4K
-	select IRQ_CPU
-	select BOOT_ELF32
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select PCI_GT64XXX_PCI0
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_MIPS32_R1
-	select SYS_HAS_CPU_MIPS32_R2
-	select SYS_HAS_CPU_MIPS64_R1
-	select SYS_HAS_CPU_NEVADA
-	select SYS_HAS_CPU_RM7000
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	help
-	  This enables support for the Wind River MIPS32 4KC PPMC evaluation
-	  board, which is based on GT64120 bridge chip.
-
-config CAVIUM_OCTEON_SIMULATOR
-	bool "Cavium Networks Octeon Simulator"
-	select CEVT_R4K
-	select 64BIT_PHYS_ADDR
-	select DMA_COHERENT
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_HOTPLUG_CPU
-	select SYS_HAS_CPU_CAVIUM_OCTEON
-	select HOLES_IN_ZONE
-	help
-	  The Octeon simulator is software performance model of the Cavium
-	  Octeon Processor. It supports simulating Octeon processors on x86
-	  hardware.
-
-config CAVIUM_OCTEON_REFERENCE_BOARD
-	bool "Cavium Networks Octeon reference board"
+config CAVIUM_OCTEON_SOC
+	bool "Cavium Networks Octeon SoC based boards"
 	select CEVT_R4K
 	select 64BIT_PHYS_ADDR
 	select DMA_COHERENT
@@ -806,6 +768,8 @@ config NLM_XLR_BOARD
 	select SYS_HAS_EARLY_PRINTK
 	select USB_ARCH_HAS_OHCI if USB_SUPPORT
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
+	select SYS_SUPPORTS_ZBOOT
+	select SYS_SUPPORTS_ZBOOT_UART16550
 	help
 	  Support for systems based on Netlogic XLR and XLS processors.
 	  Say Y here if you have a XLR or XLS based board.
@@ -832,6 +796,8 @@ config NLM_XLP_BOARD
 	select SYNC_R4K
 	select SYS_HAS_EARLY_PRINTK
 	select USE_OF
+	select SYS_SUPPORTS_ZBOOT
+	select SYS_SUPPORTS_ZBOOT_UART16550
 	help
 	  This board is based on Netlogic XLP Processor.
 	  Say Y here if you have a XLP based board.
@@ -1031,7 +997,6 @@ config CPU_BIG_ENDIAN
 config CPU_LITTLE_ENDIAN
 	bool "Little endian"
 	depends on SYS_SUPPORTS_LITTLE_ENDIAN
-	help
 
 endchoice
 
@@ -1964,7 +1929,7 @@ config MIPS_MT_FPAFF
 
 config MIPS_VPE_LOADER
 	bool "VPE loader support."
-	depends on SYS_SUPPORTS_MULTITHREADING
+	depends on SYS_SUPPORTS_MULTITHREADING && MODULES
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
 	select MIPS_MT
@@ -2382,6 +2347,19 @@ config SECCOMP
 
 	  If unsure, say Y. Only embedded should say N here.
 
+config CC_STACKPROTECTOR
+	bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
+	help
+	  This option turns on the -fstack-protector GCC feature. This
+	  feature puts, at the beginning of functions, a canary value on
+	  the stack just before the return address, and validates
+	  the value just before actually returning.  Stack based buffer
+	  overflows (that need to overwrite this return address) now also
+	  overwrite the canary, which gets detected and the attack is then
+	  neutralized via a kernel panic.
+
+	  This feature requires gcc version 4.2 or above.
+
 config USE_OF
 	bool
 	select OF
@@ -2413,7 +2391,6 @@ config PCI
 	bool "Support for PCI controller"
 	depends on HW_HAS_PCI
 	select PCI_DOMAINS
-	select GENERIC_PCI_IOMAP
 	select NO_GENERIC_PCI_IOPORT_MAP
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
@@ -2479,6 +2456,9 @@ config I8253
 	select CLKEVT_I8253
 	select MIPS_EXTERNAL_TIMER
 
+config ZONE_DMA
+	bool
+
 config ZONE_DMA32
 	bool
 

arch/mips/Makefile

@@ -227,6 +227,10 @@ KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)
 
 LDFLAGS			+= -m $(ld-emul)
 
+ifdef CONFIG_CC_STACKPROTECTOR
+  KBUILD_CFLAGS += -fstack-protector
+endif
+
 ifdef CONFIG_MIPS
 CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \
 	egrep -vw '__GNUC_(|MINOR_|PATCHLEVEL_)_' | \

arch/mips/ath79/mach-ap136.c

@@ -132,7 +132,7 @@ static void __init ap136_pci_init(u8 *eeprom)
 	ath79_register_pci();
 }
 #else
-static inline void ap136_pci_init(void) {}
+static inline void ap136_pci_init(u8 *eeprom) {}
 #endif /* CONFIG_PCI */
 
 static void __init ap136_setup(void)

arch/mips/bcm63xx/Kconfig

 menu "CPU support"
 	depends on BCM63XX
 
+config BCM63XX_CPU_3368
+	bool "support 3368 CPU"
+	select HW_HAS_PCI
+
 config BCM63XX_CPU_6328
 	bool "support 6328 CPU"
 	select HW_HAS_PCI
@@ -8,14 +12,9 @@ config BCM63XX_CPU_6328
 config BCM63XX_CPU_6338
 	bool "support 6338 CPU"
 	select HW_HAS_PCI
-	select USB_ARCH_HAS_OHCI
-	select USB_OHCI_BIG_ENDIAN_DESC
-	select USB_OHCI_BIG_ENDIAN_MMIO
 
 config BCM63XX_CPU_6345
 	bool "support 6345 CPU"
-	select USB_OHCI_BIG_ENDIAN_DESC
-	select USB_OHCI_BIG_ENDIAN_MMIO
 
 config BCM63XX_CPU_6348
 	bool "support 6348 CPU"

arch/mips/bcm63xx/boards/board_bcm963xx.c

@@ -28,10 +28,46 @@
 #include <bcm63xx_dev_usb_usbd.h>
 #include <board_bcm963xx.h>
 
+#include <uapi/linux/bcm933xx_hcs.h>
+
 #define PFX	"board_bcm963xx: "
 
+#define HCS_OFFSET_128K			0x20000
+
 static struct board_info board;
 
+/*
+ * known 3368 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_3368
+static struct board_info __initdata board_cvg834g = {
+	.name				= "CVG834G_E15R3921",
+	.expected_cpu_id		= 0x3368,
+
+	.has_uart0			= 1,
+	.has_uart1			= 1,
+
+	.has_enet0			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+
+	.leds = {
+		{
+			.name		= "CVG834G:green:power",
+			.gpio		= 37,
+			.default_trigger= "default-on",
+		},
+	},
+
+	.ephy_reset_gpio		= 36,
+	.ephy_reset_gpio_flags		= GPIOF_INIT_HIGH,
+};
+#endif
+
 /*
  * known 6328 boards
  */
@@ -639,6 +675,9 @@ static struct board_info __initdata board_DWVS0 = {
  * all boards
  */
 static const struct board_info __initconst *bcm963xx_boards[] = {
+#ifdef CONFIG_BCM63XX_CPU_3368
+	&board_cvg834g,
+#endif
 #ifdef CONFIG_BCM63XX_CPU_6328
 	&board_96328avng,
 #endif
@@ -722,8 +761,9 @@ void __init board_prom_init(void)
 	unsigned int i;
 	u8 *boot_addr, *cfe;
 	char cfe_version[32];
-	char *board_name;
+	char *board_name = NULL;
 	u32 val;
+	struct bcm_hcs *hcs;
 
 	/* read base address of boot chip select (0)
 	 * 6328/6362 do not have MPI but boot from a fixed address
@@ -747,7 +787,12 @@ void __init board_prom_init(void)
 
 	bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET);
 
+	if (BCMCPU_IS_3368()) {
+		hcs = (struct bcm_hcs *)boot_addr;
+		board_name = hcs->filename;
+	} else {
 		board_name = bcm63xx_nvram_get_name();
+	}
 	/* find board by name */
 	for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
 		if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
@@ -877,5 +922,9 @@ int __init board_register_devices(void)
 
 	platform_device_register(&bcm63xx_gpio_leds);
 
+	if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
+		gpio_request_one(board.ephy_reset_gpio,
+				board.ephy_reset_gpio_flags, "ephy-reset");
+
 	return 0;
 }

arch/mips/bcm63xx/clk.c

@@ -84,7 +84,7 @@ static void enetx_set(struct clk *clk, int enable)
 	else
 		clk_disable_unlocked(&clk_enet_misc);
 
-	if (BCMCPU_IS_6358()) {
+	if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
 		u32 mask;
 
 		if (clk->id == 0)
@@ -110,8 +110,7 @@ static struct clk clk_enet1 = {
  */
 static void ephy_set(struct clk *clk, int enable)
 {
-	if (!BCMCPU_IS_6358())
-		return;
+	if (BCMCPU_IS_3368() || BCMCPU_IS_6358())
 		bcm_hwclock_set(CKCTL_6358_EPHY_EN, enable);
 }
 
@@ -155,8 +154,9 @@ static struct clk clk_enetsw = {
  */
 static void pcm_set(struct clk *clk, int enable)
 {
-	if (!BCMCPU_IS_6358())
-		return;
+	if (BCMCPU_IS_3368())
+		bcm_hwclock_set(CKCTL_3368_PCM_EN, enable);
+	if (BCMCPU_IS_6358())
 		bcm_hwclock_set(CKCTL_6358_PCM_EN, enable);
 }
 
@@ -211,7 +211,7 @@ static void spi_set(struct clk *clk, int enable)
 		mask = CKCTL_6338_SPI_EN;
 	else if (BCMCPU_IS_6348())
 		mask = CKCTL_6348_SPI_EN;
-	else if (BCMCPU_IS_6358())
+	else if (BCMCPU_IS_3368() || BCMCPU_IS_6358())
 		mask = CKCTL_6358_SPI_EN;
 	else if (BCMCPU_IS_6362())
 		mask = CKCTL_6362_SPI_EN;
@@ -318,6 +318,18 @@ unsigned long clk_get_rate(struct clk *clk)
 
 EXPORT_SYMBOL(clk_get_rate);
 
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	return 0;
+}
+EXPORT_SYMBOL_GPL(clk_set_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	return 0;
+}
+EXPORT_SYMBOL_GPL(clk_round_rate);
+
 struct clk *clk_get(struct device *dev, const char *id)
 {
 	if (!strcmp(id, "enet0"))
@@ -338,7 +350,7 @@ struct clk *clk_get(struct device *dev, const char *id)
 		return &clk_xtm;
 	if (!strcmp(id, "periph"))
 		return &clk_periph;
-	if (BCMCPU_IS_6358() && !strcmp(id, "pcm"))
+	if ((BCMCPU_IS_3368() || BCMCPU_IS_6358()) && !strcmp(id, "pcm"))
 		return &clk_pcm;
 	if ((BCMCPU_IS_6362() || BCMCPU_IS_6368()) && !strcmp(id, "ipsec"))
 		return &clk_ipsec;

arch/mips/bcm63xx/cpu.c

@@ -29,6 +29,14 @@ static u8 bcm63xx_cpu_rev;
 static unsigned int bcm63xx_cpu_freq;
 static unsigned int bcm63xx_memory_size;
 
+static const unsigned long bcm3368_regs_base[] = {
+	__GEN_CPU_REGS_TABLE(3368)
+};
+
+static const int bcm3368_irqs[] = {
+	__GEN_CPU_IRQ_TABLE(3368)
+};
+
 static const unsigned long bcm6328_regs_base[] = {
 	__GEN_CPU_REGS_TABLE(6328)
 };
@@ -116,6 +124,9 @@ unsigned int bcm63xx_get_memory_size(void)
 static unsigned int detect_cpu_clock(void)
 {
 	switch (bcm63xx_get_cpu_id()) {
+	case BCM3368_CPU_ID:
+		return 300000000;
+
 	case BCM6328_CPU_ID:
 	{
 		unsigned int tmp, mips_pll_fcvo;
@@ -266,7 +277,7 @@ static unsigned int detect_memory_size(void)
 		banks = (val & SDRAM_CFG_BANK_MASK) ? 2 : 1;
 	}
 
-	if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) {
+	if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6368()) {
 		val = bcm_memc_readl(MEMC_CFG_REG);
 		rows = (val & MEMC_CFG_ROW_MASK) >> MEMC_CFG_ROW_SHIFT;
 		cols = (val & MEMC_CFG_COL_MASK) >> MEMC_CFG_COL_SHIFT;
@@ -302,12 +313,19 @@ void __init bcm63xx_cpu_init(void)
 		chipid_reg = BCM_6345_PERF_BASE;
 		break;
 	case CPU_BMIPS4350:
-		if ((read_c0_prid() & 0xf0) == 0x10)
+		switch ((read_c0_prid() & 0xff)) {
+		case 0x04:
+			chipid_reg = BCM_3368_PERF_BASE;
+			break;
+		case 0x10:
 			chipid_reg = BCM_6345_PERF_BASE;
-		else
+			break;
+		default:
 			chipid_reg = BCM_6368_PERF_BASE;
 			break;
 		}
+		break;
+	}
 
 	/*
 	 * really early to panic, but delaying panic would not help since we
@@ -322,6 +340,10 @@ void __init bcm63xx_cpu_init(void)
 	bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
 
 	switch (bcm63xx_cpu_id) {
+	case BCM3368_CPU_ID:
+		bcm63xx_regs_base = bcm3368_regs_base;
+		bcm63xx_irqs = bcm3368_irqs;
+		break;
 	case BCM6328_CPU_ID:
 		bcm63xx_regs_base = bcm6328_regs_base;
 		bcm63xx_irqs = bcm6328_irqs;

arch/mips/bcm63xx/dev-flash.c

@@ -71,6 +71,7 @@ static int __init bcm63xx_detect_flash_type(void)
 	case BCM6348_CPU_ID:
 		/* no way to auto detect so assume parallel */
 		return BCM63XX_FLASH_TYPE_PARALLEL;
+	case BCM3368_CPU_ID:
 	case BCM6358_CPU_ID:
 		val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
 		if (val & STRAPBUS_6358_BOOT_SEL_PARALLEL)

arch/mips/bcm63xx/dev-spi.c

@@ -37,7 +37,8 @@ static __init void bcm63xx_spi_regs_init(void)
 {
 	if (BCMCPU_IS_6338() || BCMCPU_IS_6348())
 		bcm63xx_regs_spi = bcm6348_regs_spi;
-	if (BCMCPU_IS_6358() || BCMCPU_IS_6362() || BCMCPU_IS_6368())
+	if (BCMCPU_IS_3368() || BCMCPU_IS_6358() ||
+		BCMCPU_IS_6362() || BCMCPU_IS_6368())
 		bcm63xx_regs_spi = bcm6358_regs_spi;
 }
 #else
@@ -87,7 +88,8 @@ int __init bcm63xx_spi_register(void)
 		spi_pdata.msg_ctl_width = SPI_6348_MSG_CTL_WIDTH;
 	}
 
-	if (BCMCPU_IS_6358() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
+	if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6362() ||
+		BCMCPU_IS_6368()) {
 		spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
 		spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE;
 		spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT;

arch/mips/bcm63xx/dev-uart.c

@@ -54,7 +54,8 @@ int __init bcm63xx_uart_register(unsigned int id)
 	if (id >= ARRAY_SIZE(bcm63xx_uart_devices))
 		return -ENODEV;
 
-	if (id == 1 && (!BCMCPU_IS_6358() && !BCMCPU_IS_6368()))
+	if (id == 1 && (!BCMCPU_IS_3368() && !BCMCPU_IS_6358() &&
+		!BCMCPU_IS_6368()))
 		return -ENODEV;
 
 	if (id == 0) {

arch/mips/bcm63xx/irq.c

@@ -27,6 +27,17 @@ static void __internal_irq_unmask_32(unsigned int irq) __maybe_unused;
 static void __internal_irq_unmask_64(unsigned int irq) __maybe_unused;
 
 #ifndef BCMCPU_RUNTIME_DETECT
+#ifdef CONFIG_BCM63XX_CPU_3368
+#define irq_stat_reg		PERF_IRQSTAT_3368_REG
+#define irq_mask_reg		PERF_IRQMASK_3368_REG
+#define irq_bits		32
+#define is_ext_irq_cascaded	0
+#define ext_irq_start		0
+#define ext_irq_end		0
+#define ext_irq_count		4
+#define ext_irq_cfg_reg1	PERF_EXTIRQ_CFG_REG_3368
+#define ext_irq_cfg_reg2	0
+#endif
 #ifdef CONFIG_BCM63XX_CPU_6328
 #define irq_stat_reg		PERF_IRQSTAT_6328_REG
 #define irq_mask_reg		PERF_IRQMASK_6328_REG
@@ -140,6 +151,13 @@ static void bcm63xx_init_irq(void)
 	irq_mask_addr = bcm63xx_regset_address(RSET_PERF);
 
 	switch (bcm63xx_get_cpu_id()) {
+	case BCM3368_CPU_ID:
+		irq_stat_addr += PERF_IRQSTAT_3368_REG;
+		irq_mask_addr += PERF_IRQMASK_3368_REG;
+		irq_bits = 32;
+		ext_irq_count = 4;
+		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
+		break;
 	case BCM6328_CPU_ID:
 		irq_stat_addr += PERF_IRQSTAT_6328_REG;
 		irq_mask_addr += PERF_IRQMASK_6328_REG;
@@ -294,6 +312,10 @@ asmlinkage void plat_irq_dispatch(void)
 
 		if (cause & CAUSEF_IP7)
 			do_IRQ(7);
+		if (cause & CAUSEF_IP0)
+			do_IRQ(0);
+		if (cause & CAUSEF_IP1)
+			do_IRQ(1);
 		if (cause & CAUSEF_IP2)
 			dispatch_internal();
 		if (!is_ext_irq_cascaded) {
@@ -475,6 +497,7 @@ static int bcm63xx_external_irq_set_type(struct irq_data *d,
 			reg &= ~EXTIRQ_CFG_BOTHEDGE_6348(irq);
 		break;
 
+	case BCM3368_CPU_ID:
 	case BCM6328_CPU_ID:
 	case BCM6338_CPU_ID:
 	case BCM6345_CPU_ID:

arch/mips/bcm63xx/nvram.c

@@ -42,6 +42,7 @@ void __init bcm63xx_nvram_init(void *addr)
 {
 	unsigned int check_len;
 	u32 crc, expected_crc;
+	u8 hcs_mac_addr[ETH_ALEN] = { 0x00, 0x10, 0x18, 0xff, 0xff, 0xff };
 
 	/* extract nvram data */
 	memcpy(&nvram, addr, sizeof(nvram));
@@ -62,6 +63,15 @@ void __init bcm63xx_nvram_init(void *addr)
 	if (crc != expected_crc)
 		pr_warn("nvram checksum failed, contents may be invalid (expected %08x, got %08x)\n",
 			expected_crc, crc);
+
+	/* Cable modems have a different NVRAM which is embedded in the eCos
+	 * firmware and not easily extractible, give at least a MAC address
+	 * pool.
+	 */
+	if (BCMCPU_IS_3368()) {
+		memcpy(nvram.mac_addr_base, hcs_mac_addr, ETH_ALEN);
+		nvram.mac_addr_count = 2;
+	}
 }
 
 u8 *bcm63xx_nvram_get_name(void)

arch/mips/bcm63xx/prom.c

@@ -8,7 +8,11 @@
 
 #include <linux/init.h>
 #include <linux/bootmem.h>
+#include <linux/smp.h>
 #include <asm/bootinfo.h>
+#include <asm/bmips.h>
+#include <asm/smp-ops.h>
+#include <asm/mipsregs.h>
 #include <bcm63xx_board.h>
 #include <bcm63xx_cpu.h>
 #include <bcm63xx_io.h>
@@ -26,7 +30,9 @@ void __init prom_init(void)
 	bcm_wdt_writel(WDT_STOP_2, WDT_CTL_REG);
 
 	/* disable all hardware blocks clock for now */
-	if (BCMCPU_IS_6328())
+	if (BCMCPU_IS_3368())
+		mask = CKCTL_3368_ALL_SAFE_EN;
+	else if (BCMCPU_IS_6328())
 		mask = CKCTL_6328_ALL_SAFE_EN;
 	else if (BCMCPU_IS_6338())
 		mask = CKCTL_6338_ALL_SAFE_EN;
@@ -52,6 +58,47 @@ void __init prom_init(void)
 
 	/* do low level board init */
 	board_prom_init();
+
+	if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) {
+		/* set up SMP */
+		register_smp_ops(&bmips_smp_ops);
+
+		/*
+		 * BCM6328 might not have its second CPU enabled, while BCM6358
+		 * needs special handling for its shared TLB, so disable SMP
+		 * for now.
+		 */
+		if (BCMCPU_IS_6328()) {
+			reg = bcm_readl(BCM_6328_OTP_BASE +
+					OTP_USER_BITS_6328_REG(3));
+
+			if (reg & OTP_6328_REG3_TP1_DISABLED)
+				bmips_smp_enabled = 0;
+		} else if (BCMCPU_IS_6358()) {
+			bmips_smp_enabled = 0;
+		}
+
+		if (!bmips_smp_enabled)
+			return;
+
+		/*
+		 * The bootloader has set up the CPU1 reset vector at
+		 * 0xa000_0200.
+		 * This conflicts with the special interrupt vector (IV).
+		 * The bootloader has also set up CPU1 to respond to the wrong
+		 * IPI interrupt.
+		 * Here we will start up CPU1 in the background and ask it to
+		 * reconfigure itself then go back to sleep.
+		 */
+		memcpy((void *)0xa0000200, &bmips_smp_movevec, 0x20);
+		__sync();
+		set_c0_cause(C_SW0);
+		cpumask_set_cpu(1, &bmips_booted_mask);
+
+		/*
+		 * FIXME: we really should have some sort of hazard barrier here
+		 */
+	}
 }
 
 void __init prom_free_prom_memory(void)

arch/mips/bcm63xx/reset.c

@@ -30,6 +30,19 @@
 	[BCM63XX_RESET_PCIE]		= BCM## __cpu ##_RESET_PCIE,	\
 	[BCM63XX_RESET_PCIE_EXT]	= BCM## __cpu ##_RESET_PCIE_EXT,
 
+#define BCM3368_RESET_SPI	SOFTRESET_3368_SPI_MASK
+#define BCM3368_RESET_ENET	SOFTRESET_3368_ENET_MASK
+#define BCM3368_RESET_USBH	0
+#define BCM3368_RESET_USBD	SOFTRESET_3368_USBS_MASK
+#define BCM3368_RESET_DSL	0
+#define BCM3368_RESET_SAR	0
+#define BCM3368_RESET_EPHY	SOFTRESET_3368_EPHY_MASK
+#define BCM3368_RESET_ENETSW	0
+#define BCM3368_RESET_PCM	SOFTRESET_3368_PCM_MASK
+#define BCM3368_RESET_MPI	SOFTRESET_3368_MPI_MASK
+#define BCM3368_RESET_PCIE	0
+#define BCM3368_RESET_PCIE_EXT	0
+
 #define BCM6328_RESET_SPI	SOFTRESET_6328_SPI_MASK
 #define BCM6328_RESET_ENET	0
 #define BCM6328_RESET_USBH	SOFTRESET_6328_USBH_MASK
@@ -117,6 +130,10 @@
 /*
  * core reset bits
  */
+static const u32 bcm3368_reset_bits[] = {
+	__GEN_RESET_BITS_TABLE(3368)
+};
+
 static const u32 bcm6328_reset_bits[] = {
 	__GEN_RESET_BITS_TABLE(6328)
 };
@@ -146,7 +163,10 @@ static int reset_reg;
 
 static int __init bcm63xx_reset_bits_init(void)
 {
-	if (BCMCPU_IS_6328()) {
+	if (BCMCPU_IS_3368()) {
+		reset_reg = PERF_SOFTRESET_6358_REG;
+		bcm63xx_reset_bits = bcm3368_reset_bits;
+	} else if (BCMCPU_IS_6328()) {
 		reset_reg = PERF_SOFTRESET_6328_REG;
 		bcm63xx_reset_bits = bcm6328_reset_bits;
 	} else if (BCMCPU_IS_6338()) {
@@ -170,6 +190,13 @@ static int __init bcm63xx_reset_bits_init(void)
 }
 #else
 
+#ifdef CONFIG_BCM63XX_CPU_3368
+static const u32 bcm63xx_reset_bits[] = {
+	__GEN_RESET_BITS_TABLE(3368)
+};
+#define reset_reg PERF_SOFTRESET_6358_REG
+#endif
+
 #ifdef CONFIG_BCM63XX_CPU_6328
 static const u32 bcm63xx_reset_bits[] = {
 	__GEN_RESET_BITS_TABLE(6328)

arch/mips/bcm63xx/setup.c

@@ -68,6 +68,9 @@ void bcm63xx_machine_reboot(void)
 
 	/* mask and clear all external irq */
 	switch (bcm63xx_get_cpu_id()) {
+	case BCM3368_CPU_ID:
+		perf_regs[0] = PERF_EXTIRQ_CFG_REG_3368;
+		break;
 	case BCM6328_CPU_ID:
 		perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328;
 		break;

arch/mips/boot/compressed/Makefile

@@ -18,6 +18,8 @@ BOOT_HEAP_SIZE := 0x400000
 # Disable Function Tracer
 KBUILD_CFLAGS := $(shell echo $(KBUILD_CFLAGS) | sed -e "s/-pg//")
 
+KBUILD_CFLAGS := $(filter-out -fstack-protector, $(KBUILD_CFLAGS))
+
 KBUILD_CFLAGS := $(LINUXINCLUDE) $(KBUILD_CFLAGS) -D__KERNEL__ \
 	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull"
 

arch/mips/boot/compressed/uart-16550.c

@@ -23,23 +23,39 @@
 #define PORT(offset) (UART0_BASE + (4 * offset))
 #endif
 
+#ifdef CONFIG_CPU_XLR
+#define UART0_BASE  0x1EF14000
+#define PORT(offset) (CKSEG1ADDR(UART0_BASE) + (4 * offset))
+#define IOTYPE unsigned int
+#endif
+
+#ifdef CONFIG_CPU_XLP
+#define UART0_BASE  0x18030100
+#define PORT(offset) (CKSEG1ADDR(UART0_BASE) + (4 * offset))
+#define IOTYPE unsigned int
+#endif
+
+#ifndef IOTYPE
+#define IOTYPE char
+#endif
+
 #ifndef PORT
 #error please define the serial port address for your own machine
 #endif
 
 static inline unsigned int serial_in(int offset)
 {
-	return *((char *)PORT(offset));
+	return *((volatile IOTYPE *)PORT(offset)) & 0xFF;
 }
 
 static inline void serial_out(int offset, int value)
 {
-	*((char *)PORT(offset)) = value;
+	*((volatile IOTYPE *)PORT(offset)) = value & 0xFF;
 }
 
 void putc(char c)
 {
-	int timeout = 1024;
+	int timeout = 1000000;
 
 	while (((serial_in(UART_LSR) & UART_LSR_THRE) == 0) && (timeout-- > 0))
 		;

arch/mips/cavium-octeon/Kconfig

@@ -10,6 +10,10 @@ config CAVIUM_CN63XXP1
 	  non-CN63XXP1 hardware, so it is recommended to select "n"
 	  unless it is known the workarounds are needed.
 
+endif # CPU_CAVIUM_OCTEON
+
+if CAVIUM_OCTEON_SOC
+
 config CAVIUM_OCTEON_2ND_KERNEL
 	bool "Build the kernel to be used as a 2nd kernel on the same chip"
 	default "n"
@@ -19,17 +23,6 @@ config CAVIUM_OCTEON_2ND_KERNEL
 	  with this option to be run at the same time as one built without this
 	  option.
 
-config CAVIUM_OCTEON_HW_FIX_UNALIGNED
-	bool "Enable hardware fixups of unaligned loads and stores"
-	default "y"
-	help
-	  Configure the Octeon hardware to automatically fix unaligned loads
-	  and stores. Normally unaligned accesses are fixed using a kernel
-	  exception handler. This option enables the hardware automatic fixups,
-	  which requires only an extra 3 cycles. Disable this option if you
-	  are running code that relies on address exceptions on unaligned
-	  accesses.
-
 config CAVIUM_OCTEON_CVMSEG_SIZE
 	int "Number of L1 cache lines reserved for CVMSEG memory"
 	range 0 54
@@ -103,4 +96,4 @@ config OCTEON_ILM
 	  To compile this driver as a module, choose M here.  The module
 	  will be called octeon-ilm
 
-endif # CPU_CAVIUM_OCTEON
+endif # CAVIUM_OCTEON_SOC

arch/mips/cavium-octeon/Makefile

@@ -12,11 +12,12 @@
 CFLAGS_octeon-platform.o = -I$(src)/../../../scripts/dtc/libfdt
 CFLAGS_setup.o = -I$(src)/../../../scripts/dtc/libfdt
 
-obj-y := cpu.o setup.o serial.o octeon-platform.o octeon-irq.o csrc-octeon.o
-obj-y += dma-octeon.o flash_setup.o
+obj-y := cpu.o setup.o octeon-platform.o octeon-irq.o csrc-octeon.o
+obj-y += dma-octeon.o
 obj-y += octeon-memcpy.o
 obj-y += executive/
 
+obj-$(CONFIG_MTD)		      += flash_setup.o
 obj-$(CONFIG_SMP)		      += smp.o
 obj-$(CONFIG_OCTEON_ILM)	      += oct_ilm.o
 

arch/mips/cavium-octeon/Platform

 #
 # Cavium Octeon
 #
-platform-$(CONFIG_CPU_CAVIUM_OCTEON)	+= cavium-octeon/
-cflags-$(CONFIG_CPU_CAVIUM_OCTEON)	+=				\
+platform-$(CONFIG_CAVIUM_OCTEON_SOC)	+= cavium-octeon/
+cflags-$(CONFIG_CAVIUM_OCTEON_SOC)	+=				\
 		-I$(srctree)/arch/mips/include/asm/mach-cavium-octeon
 ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
-load-$(CONFIG_CPU_CAVIUM_OCTEON)	+= 0xffffffff84100000
+load-$(CONFIG_CAVIUM_OCTEON_SOC)	+= 0xffffffff84100000
 else
-load-$(CONFIG_CPU_CAVIUM_OCTEON)	+= 0xffffffff81100000
+load-$(CONFIG_CAVIUM_OCTEON_SOC)	+= 0xffffffff81100000
 endif

arch/mips/cavium-octeon/executive/cvmx-helper-board.c

@@ -181,6 +181,11 @@ int cvmx_helper_board_get_mii_address(int ipd_port)
 			return ipd_port - 16 + 4;
 		else
 			return -1;
+	case CVMX_BOARD_TYPE_UBNT_E100:
+		if (ipd_port >= 0 && ipd_port <= 2)
+			return 7 - ipd_port;
+		else
+			return -1;
 	}
 
 	/* Some unknown board. Somebody forgot to update this function... */
@@ -706,6 +711,14 @@ int __cvmx_helper_board_hardware_enable(int interface)
 				}
 			}
 		}
+	} else if (cvmx_sysinfo_get()->board_type ==
+			CVMX_BOARD_TYPE_UBNT_E100) {
+		cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), 0);
+		cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), 0x10);
+		cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(1, interface), 0);
+		cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(1, interface), 0x10);
+		cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(2, interface), 0);
+		cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(2, interface), 0x10);
 	}
 	return 0;
 }

arch/mips/cavium-octeon/octeon-platform.c

@@ -490,8 +490,15 @@ int __init octeon_prune_device_tree(void)
 
 		if (alias_prop) {
 			uart = fdt_path_offset(initial_boot_params, alias_prop);
-			if (uart_mask & (1 << i))
+			if (uart_mask & (1 << i)) {
+				__be32 f;
+
+				f = cpu_to_be32(octeon_get_io_clock_rate());
+				fdt_setprop_inplace(initial_boot_params,
+						    uart, "clock-frequency",
+						    &f, sizeof(f));
 				continue;
+			}
 			pr_debug("Deleting uart%d\n", i);
 			fdt_nop_node(initial_boot_params, uart);
 			fdt_nop_property(initial_boot_params, aliases,

arch/mips/cavium-octeon/serial.c

-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004-2007 Cavium Networks
- */
-#include <linux/console.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/tty.h>
-#include <linux/irq.h>
-
-#include <asm/time.h>
-
-#include <asm/octeon/octeon.h>
-
-#define DEBUG_UART 1
-
-unsigned int octeon_serial_in(struct uart_port *up, int offset)
-{
-	int rv = cvmx_read_csr((uint64_t)(up->membase + (offset << 3)));
-	if (offset == UART_IIR && (rv & 0xf) == 7) {
-		/* Busy interrupt, read the USR (39) and try again. */
-		cvmx_read_csr((uint64_t)(up->membase + (39 << 3)));
-		rv = cvmx_read_csr((uint64_t)(up->membase + (offset << 3)));
-	}
-	return rv;
-}
-
-void octeon_serial_out(struct uart_port *up, int offset, int value)
-{
-	/*
-	 * If bits 6 or 7 of the OCTEON UART's LCR are set, it quits
-	 * working.
-	 */
-	if (offset == UART_LCR)
-		value &= 0x9f;
-	cvmx_write_csr((uint64_t)(up->membase + (offset << 3)), (u8)value);
-}
-
-static int octeon_serial_probe(struct platform_device *pdev)
-{
-	int irq, res;
-	struct resource *res_mem;
-	struct uart_8250_port up;
-
-	/* All adaptors have an irq.  */
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
-		return irq;
-
-	memset(&up, 0, sizeof(up));
-
-	up.port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
-	up.port.type = PORT_OCTEON;
-	up.port.iotype = UPIO_MEM;
-	up.port.regshift = 3;
-	up.port.dev = &pdev->dev;
-
-	if (octeon_is_simulation())
-		/* Make simulator output fast*/
-		up.port.uartclk = 115200 * 16;
-	else
-		up.port.uartclk = octeon_get_io_clock_rate();
-
-	up.port.serial_in = octeon_serial_in;
-	up.port.serial_out = octeon_serial_out;
-	up.port.irq = irq;
-
-	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res_mem == NULL) {
-		dev_err(&pdev->dev, "found no memory resource\n");
-		return -ENXIO;
-	}
-	up.port.mapbase = res_mem->start;
-	up.port.membase = ioremap(res_mem->start, resource_size(res_mem));
-
-	res = serial8250_register_8250_port(&up);
-
-	return res >= 0 ? 0 : res;
-}
-
-static struct of_device_id octeon_serial_match[] = {
-	{
-		.compatible = "cavium,octeon-3860-uart",
-	},
-	{},
-};
-MODULE_DEVICE_TABLE(of, octeon_serial_match);
-
-static struct platform_driver octeon_serial_driver = {
-	.probe		= octeon_serial_probe,
-	.driver		= {
-		.owner	= THIS_MODULE,
-		.name	= "octeon_serial",
-		.of_match_table = octeon_serial_match,
-	},
-};
-
-static int __init octeon_serial_init(void)
-{
-	return platform_driver_register(&octeon_serial_driver);
-}
-late_initcall(octeon_serial_init);

arch/mips/cavium-octeon/setup.c

@@ -7,6 +7,7 @@
  * Copyright (C) 2008, 2009 Wind River Systems
  *   written by Ralf Baechle <ralf@linux-mips.org>
  */
+#include <linux/compiler.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/console.h>
@@ -40,12 +41,6 @@
 #include <asm/octeon/pci-octeon.h>
 #include <asm/octeon/cvmx-mio-defs.h>
 
-#ifdef CONFIG_CAVIUM_DECODE_RSL
-extern void cvmx_interrupt_rsl_decode(void);
-extern int __cvmx_interrupt_ecc_report_single_bit_errors;
-extern void cvmx_interrupt_rsl_enable(void);
-#endif
-
 extern struct plat_smp_ops octeon_smp_ops;
 
 #ifdef CONFIG_PCI
@@ -462,18 +457,6 @@ static void octeon_halt(void)
 	octeon_kill_core(NULL);
 }
 
-/**
- * Handle all the error condition interrupts that might occur.
- *
- */
-#ifdef CONFIG_CAVIUM_DECODE_RSL
-static irqreturn_t octeon_rlm_interrupt(int cpl, void *dev_id)
-{
-	cvmx_interrupt_rsl_decode();
-	return IRQ_HANDLED;
-}
-#endif
-
 /**
  * Return a string representing the system type
  *
@@ -712,7 +695,7 @@ void __init prom_init(void)
 	if (cvmx_read_csr(CVMX_L2D_FUS3) & (3ull << 34)) {
 		pr_info("Skipping L2 locking due to reduced L2 cache size\n");
 	} else {
-		uint32_t ebase = read_c0_ebase() & 0x3ffff000;
+		uint32_t __maybe_unused ebase = read_c0_ebase() & 0x3ffff000;
 #ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB
 		/* TLB refill */
 		cvmx_l2c_lock_mem_region(ebase, 0x100);
@@ -996,7 +979,7 @@ void __init plat_mem_setup(void)
 	cvmx_bootmem_unlock();
 	/* Add the memory region for the kernel. */
 	kernel_start = (unsigned long) _text;
-	kernel_size = ALIGN(_end - _text, 0x100000);
+	kernel_size = _end - _text;
 
 	/* Adjust for physical offset. */
 	kernel_start &= ~0xffffffff80000000ULL;
@@ -1064,15 +1047,6 @@ void prom_free_prom_memory(void)
 			panic("Core-14449 WAR not in place (%04x).\n"
 			      "Please build kernel with proper options (CONFIG_CAVIUM_CN63XXP1).", insn);
 	}
-#ifdef CONFIG_CAVIUM_DECODE_RSL
-	cvmx_interrupt_rsl_enable();
-
-	/* Add an interrupt handler for general failures. */
-	if (request_irq(OCTEON_IRQ_RML, octeon_rlm_interrupt, IRQF_SHARED,
-			"RML/RSL", octeon_rlm_interrupt)) {
-		panic("Unable to request_irq(OCTEON_IRQ_RML)");
-	}
-#endif
 }
 
 int octeon_prune_device_tree(void);

arch/mips/configs/cavium_octeon_defconfig

-CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD=y
+CONFIG_CAVIUM_OCTEON_SOC=y
 CONFIG_CAVIUM_CN63XXP1=y
 CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE=2
-CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_TRANSPARENT_HUGEPAGE=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=32
 CONFIG_HZ_100=y
 CONFIG_PREEMPT=y
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -50,7 +48,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
 # CONFIG_MTD_OF_PARTS is not set
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
@@ -114,6 +111,7 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_DW=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_OCTEON=y

arch/mips/configs/wrppmc_defconfig

-CONFIG_WR_PPMC=y
-CONFIG_HZ_1000=y
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_EPOLL is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_PCI=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_ARPD=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_FW_LOADER=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SGI_IOC4=m
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_E100=y
-CONFIG_QLA3XXX=m
-CONFIG_CHELSIO_T3=m
-CONFIG_NETXEN_NIC=m
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_HW_RANDOM is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_DLM=m
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,115200n8"
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_LIBCRC32C=y

arch/mips/dec/Makefile

@@ -5,6 +5,5 @@
 obj-y		:= ecc-berr.o int-handler.o ioasic-irq.o kn01-berr.o \
 		   kn02-irq.o kn02xa-berr.o reset.o setup.o time.o
 
-obj-$(CONFIG_PROM_CONSOLE)	+= promcon.o
 obj-$(CONFIG_TC)		+= tc.o
 obj-$(CONFIG_CPU_HAS_WB)	+= wbflush.o

arch/mips/dec/promcon.c

-/*
- * Wrap-around code for a console using the
- * DECstation PROM io-routines.
- *
- * Copyright (c) 1998 Harald Koerfgen
- */
-
-#include <linux/tty.h>
-#include <linux/ptrace.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/fs.h>
-
-#include <asm/dec/prom.h>
-
-static void prom_console_write(struct console *co, const char *s,
-			       unsigned count)
-{
-	unsigned i;
-
-	/*
-	 *    Now, do each character
-	 */
-	for (i = 0; i < count; i++) {
-		if (*s == 10)
-			prom_printf("%c", 13);
-		prom_printf("%c", *s++);
-	}
-}
-
-static int __init prom_console_setup(struct console *co, char *options)
-{
-	return 0;
-}
-
-static struct console sercons = {
-	.name	= "ttyS",
-	.write	= prom_console_write,
-	.setup	= prom_console_setup,
-	.flags	= CON_PRINTBUFFER,
-	.index	= -1,
-};
-
-/*
- *    Register console.
- */
-
-static int __init prom_console_init(void)
-{
-	register_console(&sercons);
-
-	return 0;
-}
-console_initcall(prom_console_init);

arch/mips/fw/cfe/cfe_api.c

@@ -406,12 +406,12 @@ int cfe_setenv(char *name, char *val)
 	return xiocb.xiocb_status;
 }
 
-int cfe_write(int handle, unsigned char *buffer, int length)
+int cfe_write(int handle, const char *buffer, int length)
 {
 	return cfe_writeblk(handle, 0, buffer, length);
 }
 
-int cfe_writeblk(int handle, s64 offset, unsigned char *buffer, int length)
+int cfe_writeblk(int handle, s64 offset, const char *buffer, int length)
 {
 	struct cfe_xiocb xiocb;
 

arch/mips/include/asm/cop2.h

@@ -11,6 +11,35 @@
 
 #include <linux/notifier.h>
 
+#if defined(CONFIG_CPU_CAVIUM_OCTEON)
+
+extern void octeon_cop2_save(struct octeon_cop2_state *);
+extern void octeon_cop2_restore(struct octeon_cop2_state *);
+
+#define cop2_save(r)		octeon_cop2_save(r)
+#define cop2_restore(r)		octeon_cop2_restore(r)
+
+#define cop2_present		1
+#define cop2_lazy_restore	1
+
+#elif defined(CONFIG_CPU_XLP)
+
+extern void nlm_cop2_save(struct nlm_cop2_state *);
+extern void nlm_cop2_restore(struct nlm_cop2_state *);
+#define cop2_save(r)		nlm_cop2_save(r)
+#define cop2_restore(r)		nlm_cop2_restore(r)
+
+#define cop2_present		1
+#define cop2_lazy_restore	0
+
+#else
+
+#define cop2_present		0
+#define cop2_lazy_restore	0
+#define cop2_save(r)
+#define cop2_restore(r)
+#endif
+
 enum cu2_ops {
 	CU2_EXCEPTION,
 	CU2_LWC2_OP,

arch/mips/include/asm/cpu-features.h

@@ -24,6 +24,16 @@
 #ifndef cpu_has_tlb
 #define cpu_has_tlb		(cpu_data[0].options & MIPS_CPU_TLB)
 #endif
+
+/*
+ * For the moment we don't consider R6000 and R8000 so we can assume that
+ * anything that doesn't support R4000-style exceptions and interrupts is
+ * R3000-like.  Users should still treat these two macro definitions as
+ * opaque.
+ */
+#ifndef cpu_has_3kex
+#define cpu_has_3kex		(!cpu_has_4kex)
+#endif
 #ifndef cpu_has_4kex
 #define cpu_has_4kex		(cpu_data[0].options & MIPS_CPU_4KEX)
 #endif
@@ -99,7 +109,11 @@
 #define cpu_has_rixi		(cpu_data[0].options & MIPS_CPU_RIXI)
 #endif
 #ifndef cpu_has_mmips
-#define cpu_has_mmips		(cpu_data[0].options & MIPS_CPU_MICROMIPS)
+# ifdef CONFIG_SYS_SUPPORTS_MICROMIPS
+#  define cpu_has_mmips		(cpu_data[0].options & MIPS_CPU_MICROMIPS)
+# else
+#  define cpu_has_mmips		0
+# endif
 #endif
 #ifndef cpu_has_vtag_icache
 #define cpu_has_vtag_icache	(cpu_data[0].icache.flags & MIPS_CACHE_VTAG)
@@ -136,7 +150,6 @@
 #endif
 #endif
 
-# define cpu_has_mips_1		(cpu_data[0].isa_level & MIPS_CPU_ISA_I)
 #ifndef cpu_has_mips_2
 # define cpu_has_mips_2		(cpu_data[0].isa_level & MIPS_CPU_ISA_II)
 #endif
@@ -149,18 +162,18 @@
 #ifndef cpu_has_mips_5
 # define cpu_has_mips_5		(cpu_data[0].isa_level & MIPS_CPU_ISA_V)
 #endif
-# ifndef cpu_has_mips32r1
+#ifndef cpu_has_mips32r1
 # define cpu_has_mips32r1	(cpu_data[0].isa_level & MIPS_CPU_ISA_M32R1)
-# endif
-# ifndef cpu_has_mips32r2
+#endif
+#ifndef cpu_has_mips32r2
 # define cpu_has_mips32r2	(cpu_data[0].isa_level & MIPS_CPU_ISA_M32R2)
-# endif
-# ifndef cpu_has_mips64r1
+#endif
+#ifndef cpu_has_mips64r1
 # define cpu_has_mips64r1	(cpu_data[0].isa_level & MIPS_CPU_ISA_M64R1)
-# endif
-# ifndef cpu_has_mips64r2
+#endif
+#ifndef cpu_has_mips64r2
 # define cpu_has_mips64r2	(cpu_data[0].isa_level & MIPS_CPU_ISA_M64R2)
-# endif
+#endif
 
 /*
  * Shortcuts ...
@@ -182,9 +195,9 @@
  * has CLO and CLZ but not DCLO nor DCLZ.  For 64-bit kernels
  * cpu_has_clo_clz also indicates the availability of DCLO and DCLZ.
  */
-# ifndef cpu_has_clo_clz
-# define cpu_has_clo_clz	cpu_has_mips_r
-# endif
+#ifndef cpu_has_clo_clz
+#define cpu_has_clo_clz	cpu_has_mips_r
+#endif
 
 #ifndef cpu_has_dsp
 #define cpu_has_dsp		(cpu_data[0].ases & MIPS_ASE_DSP)

arch/mips/include/asm/cpu.h

@@ -282,18 +282,17 @@ enum cpu_type_enum {
  * ISA Level encodings
  *
  */
-#define MIPS_CPU_ISA_I		0x00000001
-#define MIPS_CPU_ISA_II		0x00000002
-#define MIPS_CPU_ISA_III	0x00000004
-#define MIPS_CPU_ISA_IV		0x00000008
-#define MIPS_CPU_ISA_V		0x00000010
-#define MIPS_CPU_ISA_M32R1	0x00000020
-#define MIPS_CPU_ISA_M32R2	0x00000040
-#define MIPS_CPU_ISA_M64R1	0x00000080
-#define MIPS_CPU_ISA_M64R2	0x00000100
-
-#define MIPS_CPU_ISA_32BIT (MIPS_CPU_ISA_I | MIPS_CPU_ISA_II | \
-	MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2)
+#define MIPS_CPU_ISA_II		0x00000001
+#define MIPS_CPU_ISA_III	0x00000002
+#define MIPS_CPU_ISA_IV		0x00000004
+#define MIPS_CPU_ISA_V		0x00000008
+#define MIPS_CPU_ISA_M32R1	0x00000010
+#define MIPS_CPU_ISA_M32R2	0x00000020
+#define MIPS_CPU_ISA_M64R1	0x00000040
+#define MIPS_CPU_ISA_M64R2	0x00000080
+
+#define MIPS_CPU_ISA_32BIT (MIPS_CPU_ISA_II | MIPS_CPU_ISA_M32R1 | \
+	MIPS_CPU_ISA_M32R2)
 #define MIPS_CPU_ISA_64BIT (MIPS_CPU_ISA_III | MIPS_CPU_ISA_IV | \
 	MIPS_CPU_ISA_V | MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)
 

arch/mips/include/asm/fw/cfe/cfe_api.h

@@ -115,8 +115,8 @@ int cfe_read(int handle, unsigned char *buffer, int length);
 int cfe_readblk(int handle, int64_t offset, unsigned char *buffer,
 		int length);
 int cfe_setenv(char *name, char *val);
-int cfe_write(int handle, unsigned char *buffer, int length);
-int cfe_writeblk(int handle, int64_t offset, unsigned char *buffer,
+int cfe_write(int handle, const char *buffer, int length);
+int cfe_writeblk(int handle, int64_t offset, const char *buffer,
 		 int length);
 
 #endif				/* CFE_API_H */

arch/mips/include/asm/gic.h

@@ -347,7 +347,7 @@ struct gic_shared_intr_map {
 #define GIC_CPU_INT2		2 /* .		      */
 #define GIC_CPU_INT3		3 /* .		      */
 #define GIC_CPU_INT4		4 /* .		      */
-#define GIC_CPU_INT5		5 /* Core Interrupt 5 */
+#define GIC_CPU_INT5		5 /* Core Interrupt 7 */
 
 /* Local GIC interrupts. */
 #define GIC_INT_TMR		(GIC_CPU_INT5)

arch/mips/include/asm/io.h

@@ -170,6 +170,11 @@ static inline void * isa_bus_to_virt(unsigned long address)
 extern void __iomem * __ioremap(phys_t offset, phys_t size, unsigned long flags);
 extern void __iounmap(const volatile void __iomem *addr);
 
+#ifndef CONFIG_PCI
+struct pci_dev;
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
+#endif
+
 static inline void __iomem * __ioremap_mode(phys_t offset, unsigned long size,
 	unsigned long flags)
 {
@@ -449,6 +454,11 @@ __BUILDIO(q, u64)
 #define readl_relaxed			readl
 #define readq_relaxed			readq
 
+#define writeb_relaxed			writeb
+#define writew_relaxed			writew
+#define writel_relaxed			writel
+#define writeq_relaxed			writeq
+
 #define readb_be(addr)							\
 	__raw_readb((__force unsigned *)(addr))
 #define readw_be(addr)							\

arch/mips/include/asm/kspd.h

-/*
- * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- */
-
-#ifndef _ASM_KSPD_H
-#define _ASM_KSPD_H
-
-struct kspd_notifications {
-	void (*kspd_sp_exit)(int sp_id);
-
-	struct list_head list;
-};
-
-static inline void kspd_notify(struct kspd_notifications *notify)
-{
-}
-
-#endif

arch/mips/include/asm/mach-ar7/spaces.h

@@ -14,8 +14,11 @@
  * This handles the memory map.
  * We handle pages at KSEG0 for kernels with 32 bit address space.
  */
-#define PAGE_OFFSET		0x94000000UL
-#define PHYS_OFFSET		0x14000000UL
+#define PAGE_OFFSET	_AC(0x94000000, UL)
+#define PHYS_OFFSET	_AC(0x14000000, UL)
+
+#define UNCAC_BASE	_AC(0xb4000000, UL)	/* 0xa0000000 + PHYS_OFFSET */
+#define IO_BASE		UNCAC_BASE
 
 #include <asm/mach-generic/spaces.h>
 

arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h

@@ -9,6 +9,7 @@
  * compile time if only one CPU support is enabled (idea stolen from
  * arm mach-types)
  */
+#define BCM3368_CPU_ID		0x3368
 #define BCM6328_CPU_ID		0x6328
 #define BCM6338_CPU_ID		0x6338
 #define BCM6345_CPU_ID		0x6345
@@ -22,6 +23,19 @@ u16 __bcm63xx_get_cpu_id(void);
 u8 bcm63xx_get_cpu_rev(void);
 unsigned int bcm63xx_get_cpu_freq(void);
 
+#ifdef CONFIG_BCM63XX_CPU_3368
+# ifdef bcm63xx_get_cpu_id
+#  undef bcm63xx_get_cpu_id
+#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
+#  define BCMCPU_RUNTIME_DETECT
+# else
+#  define bcm63xx_get_cpu_id()	BCM3368_CPU_ID
+# endif
+# define BCMCPU_IS_3368()	(bcm63xx_get_cpu_id() == BCM3368_CPU_ID)
+#else
+# define BCMCPU_IS_3368()	(0)
+#endif
+
 #ifdef CONFIG_BCM63XX_CPU_6328
 # ifdef bcm63xx_get_cpu_id
 #  undef bcm63xx_get_cpu_id
@@ -193,6 +207,53 @@ enum bcm63xx_regs_set {
 #define RSET_XTMDMAS_SIZE(chans)	(16 * (chans))
 #define RSET_RNG_SIZE			20
 
+/*
+ * 3368 register sets base address
+ */
+#define BCM_3368_DSL_LMEM_BASE		(0xdeadbeef)
+#define BCM_3368_PERF_BASE		(0xfff8c000)
+#define BCM_3368_TIMER_BASE		(0xfff8c040)
+#define BCM_3368_WDT_BASE		(0xfff8c080)
+#define BCM_3368_UART0_BASE		(0xfff8c100)
+#define BCM_3368_UART1_BASE		(0xfff8c120)
+#define BCM_3368_GPIO_BASE		(0xfff8c080)
+#define BCM_3368_SPI_BASE		(0xfff8c800)
+#define BCM_3368_HSSPI_BASE		(0xdeadbeef)
+#define BCM_3368_UDC0_BASE		(0xdeadbeef)
+#define BCM_3368_USBDMA_BASE		(0xdeadbeef)
+#define BCM_3368_OHCI0_BASE		(0xdeadbeef)
+#define BCM_3368_OHCI_PRIV_BASE		(0xdeadbeef)
+#define BCM_3368_USBH_PRIV_BASE		(0xdeadbeef)
+#define BCM_3368_USBD_BASE		(0xdeadbeef)
+#define BCM_3368_MPI_BASE		(0xfff80000)
+#define BCM_3368_PCMCIA_BASE		(0xfff80054)
+#define BCM_3368_PCIE_BASE		(0xdeadbeef)
+#define BCM_3368_SDRAM_REGS_BASE	(0xdeadbeef)
+#define BCM_3368_DSL_BASE		(0xdeadbeef)
+#define BCM_3368_UBUS_BASE		(0xdeadbeef)
+#define BCM_3368_ENET0_BASE		(0xfff98000)
+#define BCM_3368_ENET1_BASE		(0xfff98800)
+#define BCM_3368_ENETDMA_BASE		(0xfff99800)
+#define BCM_3368_ENETDMAC_BASE		(0xfff99900)
+#define BCM_3368_ENETDMAS_BASE		(0xfff99a00)
+#define BCM_3368_ENETSW_BASE		(0xdeadbeef)
+#define BCM_3368_EHCI0_BASE		(0xdeadbeef)
+#define BCM_3368_SDRAM_BASE		(0xdeadbeef)
+#define BCM_3368_MEMC_BASE		(0xfff84000)
+#define BCM_3368_DDR_BASE		(0xdeadbeef)
+#define BCM_3368_M2M_BASE		(0xdeadbeef)
+#define BCM_3368_ATM_BASE		(0xdeadbeef)
+#define BCM_3368_XTM_BASE		(0xdeadbeef)
+#define BCM_3368_XTMDMA_BASE		(0xdeadbeef)
+#define BCM_3368_XTMDMAC_BASE		(0xdeadbeef)
+#define BCM_3368_XTMDMAS_BASE		(0xdeadbeef)
+#define BCM_3368_PCM_BASE		(0xfff9c200)
+#define BCM_3368_PCMDMA_BASE		(0xdeadbeef)
+#define BCM_3368_PCMDMAC_BASE		(0xdeadbeef)
+#define BCM_3368_PCMDMAS_BASE		(0xdeadbeef)
+#define BCM_3368_RNG_BASE		(0xdeadbeef)
+#define BCM_3368_MISC_BASE		(0xdeadbeef)
+
 /*
  * 6328 register sets base address
  */
@@ -238,6 +299,8 @@ enum bcm63xx_regs_set {
 #define BCM_6328_PCMDMAS_BASE		(0xdeadbeef)
 #define BCM_6328_RNG_BASE		(0xdeadbeef)
 #define BCM_6328_MISC_BASE		(0xb0001800)
+#define BCM_6328_OTP_BASE		(0xb0000600)
+
 /*
  * 6338 register sets base address
  */
@@ -623,6 +686,9 @@ static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
 #ifdef BCMCPU_RUNTIME_DETECT
 	return bcm63xx_regs_base[set];
 #else
+#ifdef CONFIG_BCM63XX_CPU_3368
+	__GEN_RSET(3368)
+#endif
 #ifdef CONFIG_BCM63XX_CPU_6328
 	__GEN_RSET(6328)
 #endif
@@ -689,6 +755,52 @@ enum bcm63xx_irq {
 	IRQ_XTM_DMA0,
 };
 
+/*
+ * 3368 irqs
+ */
+#define BCM_3368_TIMER_IRQ		(IRQ_INTERNAL_BASE + 0)
+#define BCM_3368_SPI_IRQ		(IRQ_INTERNAL_BASE + 1)
+#define BCM_3368_UART0_IRQ		(IRQ_INTERNAL_BASE + 2)
+#define BCM_3368_UART1_IRQ		(IRQ_INTERNAL_BASE + 3)
+#define BCM_3368_DSL_IRQ		0
+#define BCM_3368_UDC0_IRQ		0
+#define BCM_3368_OHCI0_IRQ		0
+#define BCM_3368_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
+#define BCM_3368_ENET1_IRQ		(IRQ_INTERNAL_BASE + 6)
+#define BCM_3368_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 9)
+#define BCM_3368_ENET0_RXDMA_IRQ	(IRQ_INTERNAL_BASE + 15)
+#define BCM_3368_ENET0_TXDMA_IRQ	(IRQ_INTERNAL_BASE + 16)
+#define BCM_3368_HSSPI_IRQ		0
+#define BCM_3368_EHCI0_IRQ		0
+#define BCM_3368_USBD_IRQ		0
+#define BCM_3368_USBD_RXDMA0_IRQ	0
+#define BCM_3368_USBD_TXDMA0_IRQ	0
+#define BCM_3368_USBD_RXDMA1_IRQ	0
+#define BCM_3368_USBD_TXDMA1_IRQ	0
+#define BCM_3368_USBD_RXDMA2_IRQ	0
+#define BCM_3368_USBD_TXDMA2_IRQ	0
+#define BCM_3368_ENET1_RXDMA_IRQ        (IRQ_INTERNAL_BASE + 17)
+#define BCM_3368_ENET1_TXDMA_IRQ        (IRQ_INTERNAL_BASE + 18)
+#define BCM_3368_PCI_IRQ		(IRQ_INTERNAL_BASE + 31)
+#define BCM_3368_PCMCIA_IRQ		0
+#define BCM_3368_ATM_IRQ		0
+#define BCM_3368_ENETSW_RXDMA0_IRQ	0
+#define BCM_3368_ENETSW_RXDMA1_IRQ	0
+#define BCM_3368_ENETSW_RXDMA2_IRQ	0
+#define BCM_3368_ENETSW_RXDMA3_IRQ	0
+#define BCM_3368_ENETSW_TXDMA0_IRQ	0
+#define BCM_3368_ENETSW_TXDMA1_IRQ	0
+#define BCM_3368_ENETSW_TXDMA2_IRQ	0
+#define BCM_3368_ENETSW_TXDMA3_IRQ	0
+#define BCM_3368_XTM_IRQ		0
+#define BCM_3368_XTM_DMA0_IRQ		0
+
+#define BCM_3368_EXT_IRQ0		(IRQ_INTERNAL_BASE + 25)
+#define BCM_3368_EXT_IRQ1		(IRQ_INTERNAL_BASE + 26)
+#define BCM_3368_EXT_IRQ2		(IRQ_INTERNAL_BASE + 27)
+#define BCM_3368_EXT_IRQ3		(IRQ_INTERNAL_BASE + 28)
+
+
 /*
  * 6328 irqs
  */

arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h

@@ -11,6 +11,7 @@ static inline unsigned long bcm63xx_gpio_count(void)
 	switch (bcm63xx_get_cpu_id()) {
 	case BCM6328_CPU_ID:
 		return 32;
+	case BCM3368_CPU_ID:
 	case BCM6358_CPU_ID:
 		return 40;
 	case BCM6338_CPU_ID:

arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h

@@ -15,6 +15,39 @@
 /* Clock Control register */
 #define PERF_CKCTL_REG			0x4
 
+#define CKCTL_3368_MAC_EN		(1 << 3)
+#define CKCTL_3368_TC_EN		(1 << 5)
+#define CKCTL_3368_US_TOP_EN		(1 << 6)
+#define CKCTL_3368_DS_TOP_EN		(1 << 7)
+#define CKCTL_3368_APM_EN		(1 << 8)
+#define CKCTL_3368_SPI_EN		(1 << 9)
+#define CKCTL_3368_USBS_EN		(1 << 10)
+#define CKCTL_3368_BMU_EN		(1 << 11)
+#define CKCTL_3368_PCM_EN		(1 << 12)
+#define CKCTL_3368_NTP_EN		(1 << 13)
+#define CKCTL_3368_ACP_B_EN		(1 << 14)
+#define CKCTL_3368_ACP_A_EN		(1 << 15)
+#define CKCTL_3368_EMUSB_EN		(1 << 17)
+#define CKCTL_3368_ENET0_EN		(1 << 18)
+#define CKCTL_3368_ENET1_EN		(1 << 19)
+#define CKCTL_3368_USBU_EN		(1 << 20)
+#define CKCTL_3368_EPHY_EN		(1 << 21)
+
+#define CKCTL_3368_ALL_SAFE_EN		(CKCTL_3368_MAC_EN | \
+					 CKCTL_3368_TC_EN | \
+					 CKCTL_3368_US_TOP_EN | \
+					 CKCTL_3368_DS_TOP_EN | \
+					 CKCTL_3368_APM_EN | \
+					 CKCTL_3368_SPI_EN | \
+					 CKCTL_3368_USBS_EN | \
+					 CKCTL_3368_BMU_EN | \
+					 CKCTL_3368_PCM_EN | \
+					 CKCTL_3368_NTP_EN | \
+					 CKCTL_3368_ACP_B_EN | \
+					 CKCTL_3368_ACP_A_EN | \
+					 CKCTL_3368_EMUSB_EN | \
+					 CKCTL_3368_USBU_EN)
+
 #define CKCTL_6328_PHYMIPS_EN		(1 << 0)
 #define CKCTL_6328_ADSL_QPROC_EN	(1 << 1)
 #define CKCTL_6328_ADSL_AFE_EN		(1 << 2)
@@ -181,6 +214,7 @@
 #define SYS_PLL_SOFT_RESET		0x1
 
 /* Interrupt Mask register */
+#define PERF_IRQMASK_3368_REG		0xc
 #define PERF_IRQMASK_6328_REG		0x20
 #define PERF_IRQMASK_6338_REG		0xc
 #define PERF_IRQMASK_6345_REG		0xc
@@ -190,6 +224,7 @@
 #define PERF_IRQMASK_6368_REG		0x20
 
 /* Interrupt Status register */
+#define PERF_IRQSTAT_3368_REG		0x10
 #define PERF_IRQSTAT_6328_REG		0x28
 #define PERF_IRQSTAT_6338_REG		0x10
 #define PERF_IRQSTAT_6345_REG		0x10
@@ -199,6 +234,7 @@
 #define PERF_IRQSTAT_6368_REG		0x28
 
 /* External Interrupt Configuration register */
+#define PERF_EXTIRQ_CFG_REG_3368	0x14
 #define PERF_EXTIRQ_CFG_REG_6328	0x18
 #define PERF_EXTIRQ_CFG_REG_6338	0x14
 #define PERF_EXTIRQ_CFG_REG_6345	0x14
@@ -236,6 +272,13 @@
 #define PERF_SOFTRESET_6362_REG		0x10
 #define PERF_SOFTRESET_6368_REG		0x10
 
+#define SOFTRESET_3368_SPI_MASK		(1 << 0)
+#define SOFTRESET_3368_ENET_MASK	(1 << 2)
+#define SOFTRESET_3368_MPI_MASK		(1 << 3)
+#define SOFTRESET_3368_EPHY_MASK	(1 << 6)
+#define SOFTRESET_3368_USBS_MASK	(1 << 11)
+#define SOFTRESET_3368_PCM_MASK		(1 << 13)
+
 #define SOFTRESET_6328_SPI_MASK		(1 << 0)
 #define SOFTRESET_6328_EPHY_MASK	(1 << 1)
 #define SOFTRESET_6328_SAR_MASK		(1 << 2)
@@ -1370,7 +1413,7 @@
 #define SPI_6348_RX_DATA		0x80
 #define SPI_6348_RX_DATA_SIZE		0x3f
 
-/* BCM 6358/6262/6368 SPI core */
+/* BCM 3368/6358/6262/6368 SPI core */
 #define SPI_6358_MSG_CTL		0x00	/* 16-bits register */
 #define SPI_6358_MSG_CTL_WIDTH		16
 #define SPI_6358_MSG_DATA		0x02
@@ -1511,4 +1554,11 @@
 
 #define PCIE_DEVICE_OFFSET		0x8000
 
+/*************************************************************************
+ * _REG relative to RSET_OTP
+ *************************************************************************/
+
+#define OTP_USER_BITS_6328_REG(i)	(0x20 + (i) * 4)
+#define   OTP_6328_REG3_TP1_DISABLED	BIT(9)
+
 #endif /* BCM63XX_REGS_H_ */

arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h

@@ -47,6 +47,12 @@ struct board_info {
 
 	/* GPIO LEDs */
 	struct gpio_led leds[5];
+
+	/* External PHY reset GPIO */
+	unsigned int ephy_reset_gpio;
+
+	/* External PHY reset GPIO flags from gpio.h */
+	unsigned long ephy_reset_gpio_flags;
 };
 
 #endif /* ! BOARD_BCM963XX_H_ */

arch/mips/include/asm/mach-bcm63xx/ioremap.h

@@ -11,6 +11,10 @@ static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
 static inline int is_bcm63xx_internal_registers(phys_t offset)
 {
 	switch (bcm63xx_get_cpu_id()) {
+	case BCM3368_CPU_ID:
+		if (offset >= 0xfff80000)
+			return 1;
+		break;
 	case BCM6338_CPU_ID:
 	case BCM6345_CPU_ID:
 	case BCM6348_CPU_ID:

arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h

@@ -13,6 +13,8 @@
 #ifndef __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H
 #define __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H
 
+#include <linux/bug.h>
+
 struct device;
 
 extern void octeon_pci_dma_init(void);
@@ -21,18 +23,21 @@ static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
 	size_t size)
 {
 	BUG();
+	return 0;
 }
 
 static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
 	struct page *page)
 {
 	BUG();
+	return 0;
 }
 
 static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
 	dma_addr_t dma_addr)
 {
 	BUG();
+	return 0;
 }
 
 static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
@@ -44,6 +49,7 @@ static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
 static inline int plat_dma_supported(struct device *dev, u64 mask)
 {
 	BUG();
+	return 0;
 }
 
 static inline void plat_extra_sync_for_device(struct device *dev)
@@ -60,6 +66,7 @@ static inline int plat_dma_mapping_error(struct device *dev,
 					 dma_addr_t dma_addr)
 {
 	BUG();
+	return 0;
 }
 
 dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr);

arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h

@@ -34,15 +34,10 @@
 	ori	v0, CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE
 	dmtc0	v0, CP0_CVMMEMCTL_REG	# Write the cavium mem control register
 	dmfc0	v0, CP0_CVMCTL_REG	# Read the cavium control register
-#ifdef CONFIG_CAVIUM_OCTEON_HW_FIX_UNALIGNED
 	# Disable unaligned load/store support but leave HW fixup enabled
+	# Needed for octeon specific memcpy
 	or  v0, v0, 0x5001
 	xor v0, v0, 0x1001
-#else
-	# Disable unaligned load/store and HW fixup support
-	or  v0, v0, 0x5001
-	xor v0, v0, 0x5001
-#endif
 	# Read the processor ID register
 	mfc0 v1, CP0_PRID_REG
 	# Disable instruction prefetching (Octeon Pass1 errata)

arch/mips/include/asm/mach-cavium-octeon/spaces.h

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2012 Cavium, Inc.
+ */
+#ifndef _ASM_MACH_CAVIUM_OCTEON_SPACES_H
+#define _ASM_MACH_CAVIUM_OCTEON_SPACES_H
+
+#include <linux/const.h>
+
+#ifdef CONFIG_64BIT
+/* They are all the same and some OCTEON II cores cannot handle 0xa8.. */
+#define CAC_BASE		_AC(0x8000000000000000, UL)
+#define UNCAC_BASE		_AC(0x8000000000000000, UL)
+#define IO_BASE			_AC(0x8000000000000000, UL)
+
+
+#endif /* CONFIG_64BIT */
+
+#include <asm/mach-generic/spaces.h>
+
+#endif /* _ASM_MACH_CAVIUM_OCTEON_SPACES_H */

arch/mips/include/asm/mach-generic/dma-coherence.h

@@ -66,4 +66,16 @@ static inline int plat_device_is_coherent(struct device *dev)
 #endif
 }
 
+#ifdef CONFIG_SWIOTLB
+static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	return paddr;
+}
+
+static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
+{
+	return daddr;
+}
+#endif
+
 #endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */

arch/mips/include/asm/mach-generic/kernel-entry-init.h

@@ -12,8 +12,8 @@
 /* Intentionally empty macro, used in head.S. Override in
  * arch/mips/mach-xxx/kernel-entry-init.h when necessary.
  */
-.macro	kernel_entry_setup
-.endm
+	.macro	kernel_entry_setup
+	.endm
 
 /*
  * Do SMP slave processor setup necessary before we can savely execute C code.

arch/mips/include/asm/mach-ip27/kernel-entry-init.h

@@ -23,6 +23,53 @@
 	dsrl	\res, NSRI_NODEID_SHFT
 	.endm
 
+/*
+ * TLB bits
+ */
+#define PAGE_GLOBAL		(1 << 6)
+#define PAGE_VALID		(1 << 7)
+#define PAGE_DIRTY		(1 << 8)
+#define CACHE_CACHABLE_COW	(5 << 9)
+
+	/*
+	 * inputs are the text nasid in t1, data nasid in t2.
+	 */
+	.macro MAPPED_KERNEL_SETUP_TLB
+#ifdef CONFIG_MAPPED_KERNEL
+	/*
+	 * This needs to read the nasid - assume 0 for now.
+	 * Drop in 0xffffffffc0000000 in tlbhi, 0+VG in tlblo_0,
+	 * 0+DVG in tlblo_1.
+	 */
+	dli	t0, 0xffffffffc0000000
+	dmtc0	t0, CP0_ENTRYHI
+	li	t0, 0x1c000		# Offset of text into node memory
+	dsll	t1, NASID_SHFT		# Shift text nasid into place
+	dsll	t2, NASID_SHFT		# Same for data nasid
+	or	t1, t1, t0		# Physical load address of kernel text
+	or	t2, t2, t0		# Physical load address of kernel data
+	dsrl	t1, 12			# 4K pfn
+	dsrl	t2, 12			# 4K pfn
+	dsll	t1, 6			# Get pfn into place
+	dsll	t2, 6			# Get pfn into place
+	li	t0, ((PAGE_GLOBAL | PAGE_VALID | CACHE_CACHABLE_COW) >> 6)
+	or	t0, t0, t1
+	mtc0	t0, CP0_ENTRYLO0	# physaddr, VG, cach exlwr
+	li	t0, ((PAGE_GLOBAL | PAGE_VALID |  PAGE_DIRTY | CACHE_CACHABLE_COW) >> 6)
+	or	t0, t0, t2
+	mtc0	t0, CP0_ENTRYLO1	# physaddr, DVG, cach exlwr
+	li	t0, 0x1ffe000		# MAPPED_KERN_TLBMASK, TLBPGMASK_16M
+	mtc0	t0, CP0_PAGEMASK
+	li	t0, 0			# KMAP_INX
+	mtc0	t0, CP0_INDEX
+	li	t0, 1
+	mtc0	t0, CP0_WIRED
+	tlbwi
+#else
+	mtc0	zero, CP0_WIRED
+#endif
+	.endm
+
 /*
  * Intentionally empty macro, used in head.S. Override in
  * arch/mips/mach-xxx/kernel-entry-init.h when necessary.

arch/mips/include/asm/mach-ip28/spaces.h

@@ -11,12 +11,15 @@
 #ifndef _ASM_MACH_IP28_SPACES_H
 #define _ASM_MACH_IP28_SPACES_H
 
-#define CAC_BASE		0xa800000000000000
+#define CAC_BASE	_AC(0xa800000000000000, UL)
 
 #define HIGHMEM_START	(~0UL)
 
 #define PHYS_OFFSET	_AC(0x20000000, UL)
 
+#define UNCAC_BASE	_AC(0xc0000000, UL)     /* 0xa0000000 + PHYS_OFFSET */
+#define IO_BASE		UNCAC_BASE
+
 #include <asm/mach-generic/spaces.h>
 
 #endif /* _ASM_MACH_IP28_SPACES_H */

arch/mips/include/asm/mach-pmcs-msp71xx/gpio.h

-/*
- * include/asm-mips/pmc-sierra/msp71xx/gpio.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * @author Patrick Glass <patrickglass@gmail.com>
- */
-
-#ifndef __PMC_MSP71XX_GPIO_H
-#define __PMC_MSP71XX_GPIO_H
-
-/* Max number of gpio's is 28 on chip plus 3 banks of I2C IO Expanders */
-#define ARCH_NR_GPIOS (28 + (3 * 8))
-
-/* new generic GPIO API - see Documentation/gpio.txt */
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-
-/* Setup calls for the gpio and gpio extended */
-extern void msp71xx_init_gpio(void);
-extern void msp71xx_init_gpio_extended(void);
-extern int msp71xx_set_output_drive(unsigned gpio, int value);
-
-/* Custom output drive functionss */
-static inline int gpio_set_output_drive(unsigned gpio, int value)
-{
-	return msp71xx_set_output_drive(gpio, value);
-}
-
-/* IRQ's are not supported for gpio lines */
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return -EINVAL;
-}
-
-#endif /* __PMC_MSP71XX_GPIO_H */

arch/mips/include/asm/mach-wrppmc/mach-gt64120.h

-/*
- * This is a direct copy of the ev96100.h file, with a global
- * search and replace.	The numbers are the same.
- *
- * The reason I'm duplicating this is so that the 64120/96100
- * defines won't be confusing in the source code.
- */
-#ifndef __ASM_MIPS_GT64120_H
-#define __ASM_MIPS_GT64120_H
-
-/*
- * This is the CPU physical memory map of PPMC Board:
- *
- *    0x00000000-0x03FFFFFF	 - 64MB SDRAM (SCS[0]#)
- *    0x1C000000-0x1C000000	 - LED (CS0)
- *    0x1C800000-0x1C800007	 - UART 16550 port (CS1)
- *    0x1F000000-0x1F000000	 - MailBox (CS3)
- *    0x1FC00000-0x20000000	 - 4MB Flash (BOOT CS)
- */
-
-#define WRPPMC_SDRAM_SCS0_BASE	0x00000000
-#define WRPPMC_SDRAM_SCS0_SIZE	0x04000000
-
-#define WRPPMC_UART16550_BASE	0x1C800000
-#define WRPPMC_UART16550_CLOCK	3686400 /* 3.68MHZ */
-
-#define WRPPMC_LED_BASE		0x1C000000
-#define WRPPMC_MBOX_BASE	0x1F000000
-
-#define WRPPMC_BOOTROM_BASE	0x1FC00000
-#define WRPPMC_BOOTROM_SIZE	0x00400000 /* 4M Flash */
-
-#define WRPPMC_MIPS_TIMER_IRQ	7 /* MIPS compare/count timer interrupt */
-#define WRPPMC_UART16550_IRQ	6
-#define WRPPMC_PCI_INTA_IRQ	3
-
-/*
- * PCI Bus I/O and Memory resources allocation
- *
- * NOTE: We only have PCI_0 hose interface
- */
-#define GT_PCI_MEM_BASE 0x13000000UL
-#define GT_PCI_MEM_SIZE 0x02000000UL
-#define GT_PCI_IO_BASE	0x11000000UL
-#define GT_PCI_IO_SIZE	0x02000000UL
-
-/*
- * PCI interrupts will come in on either the INTA or INTD interrupt lines,
- * which are mapped to the #2 and #5 interrupt pins of the MIPS.  On our
- * boards, they all either come in on IntD or they all come in on IntA, they
- * aren't mixed. There can be numerous PCI interrupts, so we keep a list of the
- * "requested" interrupt numbers and go through the list whenever we get an
- * IntA/D.
- *
- * Interrupts < 8 are directly wired to the processor; PCI INTA is 8 and
- * INTD is 11.
- */
-#define GT_TIMER	4
-#define GT_INTA		2
-#define GT_INTD		5
-
-#ifndef __ASSEMBLY__
-
-/*
- * GT64120 internal register space base address
- */
-extern unsigned long gt64120_base;
-
-#define GT64120_BASE	(gt64120_base)
-
-/* define WRPPMC_EARLY_DEBUG to enable early output something to UART */
-#undef WRPPMC_EARLY_DEBUG
-
-#ifdef WRPPMC_EARLY_DEBUG
-extern void wrppmc_led_on(int mask);
-extern void wrppmc_led_off(int mask);
-extern void wrppmc_early_printk(const char *fmt, ...);
-#else
-#define wrppmc_early_printk(fmt, ...) do {} while (0)
-#endif /* WRPPMC_EARLY_DEBUG */
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_MIPS_GT64120_H */

arch/mips/include/asm/mach-wrppmc/war.h

-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_WRPPMC_WAR_H
-#define __ASM_MIPS_MACH_WRPPMC_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR	0
-#define R4600_V1_HIT_CACHEOP_WAR	0
-#define R4600_V2_HIT_CACHEOP_WAR	0
-#define R5432_CP0_INTERRUPT_WAR		0
-#define BCM1250_M3_WAR			0
-#define SIBYTE_1956_WAR			0
-#define MIPS4K_ICACHE_REFILL_WAR	0
-#define MIPS_CACHE_SYNC_WAR		0
-#define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define ICACHE_REFILLS_WORKAROUND_WAR	1
-#define R10000_LLSC_WAR			0
-#define MIPS34K_MISSED_ITLB_WAR		0
-
-#endif /* __ASM_MIPS_MACH_WRPPMC_WAR_H */

arch/mips/include/asm/mips-boards/generic.h

@@ -23,12 +23,6 @@
 #define ASCII_DISPLAY_WORD_BASE	   0x1f000410
 #define ASCII_DISPLAY_POS_BASE	   0x1f000418
 
-/*
- * Reset register.
- */
-#define SOFTRES_REG	  0x1f000500
-#define GORESET		  0x42
-
 /*
  * Revision register.
  */

arch/mips/include/asm/mipsregs.h

@@ -596,7 +596,7 @@
 #define MIPS_CONF3_RXI		(_ULCAST_(1) << 12)
 #define MIPS_CONF3_ULRI		(_ULCAST_(1) << 13)
 #define MIPS_CONF3_ISA		(_ULCAST_(3) << 14)
-#define MIPS_CONF3_ISA_OE	(_ULCAST_(3) << 16)
+#define MIPS_CONF3_ISA_OE	(_ULCAST_(1) << 16)
 #define MIPS_CONF3_VZ		(_ULCAST_(1) << 23)
 
 #define MIPS_CONF4_MMUSIZEEXT	(_ULCAST_(255) << 0)

arch/mips/include/asm/mmu_context.h

@@ -28,11 +28,7 @@
 
 #define TLBMISS_HANDLER_SETUP_PGD(pgd)					\
 do {									\
-	void (*tlbmiss_handler_setup_pgd)(unsigned long);		\
-	extern u32 tlbmiss_handler_setup_pgd_array[16];			\
-									\
-	tlbmiss_handler_setup_pgd =					\
-		(__typeof__(tlbmiss_handler_setup_pgd)) tlbmiss_handler_setup_pgd_array; \
+	extern void tlbmiss_handler_setup_pgd(unsigned long);		\
 	tlbmiss_handler_setup_pgd((unsigned long)(pgd));		\
 } while (0)
 

arch/mips/include/asm/netlogic/common.h

@@ -39,11 +39,17 @@
  * Common SMP definitions
  */
 #define RESET_VEC_PHYS		0x1fc00000
+#define RESET_VEC_SIZE		8192		/* 8KB reset code and data */
 #define RESET_DATA_PHYS		(RESET_VEC_PHYS + (1<<10))
+
+/* Offsets of parameters in the RESET_DATA_PHYS area */
 #define BOOT_THREAD_MODE	0
 #define BOOT_NMI_LOCK		4
 #define BOOT_NMI_HANDLER	8
 
+/* CPU ready flags for each CPU */
+#define BOOT_CPU_READY		2048
+
 #ifndef __ASSEMBLY__
 #include <linux/cpumask.h>
 #include <linux/spinlock.h>
@@ -59,23 +65,32 @@ int nlm_wakeup_secondary_cpus(void);
 void nlm_rmiboot_preboot(void);
 void nlm_percpu_init(int hwcpuid);
 
+static inline void *
+nlm_get_boot_data(int offset)
+{
+	return (void *)(CKSEG1ADDR(RESET_DATA_PHYS) + offset);
+}
+
 static inline void
 nlm_set_nmi_handler(void *handler)
 {
-	char *reset_data;
+	void *nmih = nlm_get_boot_data(BOOT_NMI_HANDLER);
 
-	reset_data = (char *)CKSEG1ADDR(RESET_DATA_PHYS);
-	*(int64_t *)(reset_data + BOOT_NMI_HANDLER) = (long)handler;
+	*(int64_t *)nmih = (long)handler;
 }
 
 /*
  * Misc.
  */
+void nlm_init_boot_cpu(void);
 unsigned int nlm_get_cpu_frequency(void);
 void nlm_node_init(int node);
 extern struct plat_smp_ops nlm_smp_ops;
 extern char nlm_reset_entry[], nlm_reset_entry_end[];
 
+/* SWIOTLB */
+extern struct dma_map_ops nlm_swiotlb_dma_ops;
+
 extern unsigned int nlm_threads_per_core;
 extern cpumask_t nlm_cpumask;
 

arch/mips/include/asm/netlogic/xlp-hal/pic.h

@@ -315,7 +315,7 @@ nlm_pic_send_ipi(uint64_t base, int hwt, int irq, int nmi)
 {
 	uint64_t ipi;
 
-	ipi = (nmi << 31) | (irq << 20);
+	ipi = ((uint64_t)nmi << 31) | (irq << 20);
 	ipi |= ((hwt >> 4) << 16) | (1 << (hwt & 0xf)); /* cpuset and mask */
 	nlm_write_pic_reg(base, PIC_IPI_CTL, ipi);
 }

arch/mips/include/asm/netlogic/xlp-hal/xlp.h

@@ -59,6 +59,7 @@ void xlp_wakeup_secondary_cpus(void);
 
 void xlp_mmu_init(void);
 void nlm_hal_init(void);
+void *xlp_dt_init(void *fdtp);
 
 #endif /* !__ASSEMBLY__ */
 #endif /* _ASM_NLM_XLP_H */

arch/mips/include/asm/netlogic/xlr/fmn.h

@@ -175,6 +175,10 @@
 #define nlm_write_c2_cc14(s, v)		__write_32bit_c2_register($30, s, v)
 #define nlm_write_c2_cc15(s, v)		__write_32bit_c2_register($31, s, v)
 
+#define nlm_read_c2_status0()		__read_32bit_c2_register($2, 0)
+#define nlm_write_c2_status0(v)		__write_32bit_c2_register($2, 0, v)
+#define nlm_read_c2_status1()		__read_32bit_c2_register($2, 1)
+#define nlm_write_c2_status1(v)		__write_32bit_c2_register($2, 1, v)
 #define nlm_read_c2_status(sel)		__read_32bit_c2_register($2, 0)
 #define nlm_read_c2_config()		__read_32bit_c2_register($3, 0)
 #define nlm_write_c2_config(v)		__write_32bit_c2_register($3, 0, v)
@@ -237,7 +241,7 @@ static inline void nlm_msgwait(unsigned int mask)
 /*
  * Disable interrupts and enable COP2 access
  */
-static inline uint32_t nlm_cop2_enable(void)
+static inline uint32_t nlm_cop2_enable_irqsave(void)
 {
 	uint32_t sr = read_c0_status();
 
@@ -245,7 +249,7 @@ static inline uint32_t nlm_cop2_enable(void)
 	return sr;
 }
 
-static inline void nlm_cop2_restore(uint32_t sr)
+static inline void nlm_cop2_disable_irqrestore(uint32_t sr)
 {
 	write_c0_status(sr);
 }
@@ -296,7 +300,7 @@ static inline int nlm_fmn_send(unsigned int size, unsigned int code,
 	 */
 	for (i = 0; i < 8; i++) {
 		nlm_msgsnd(dest);
-		status = nlm_read_c2_status(0);
+		status = nlm_read_c2_status0();
 		if ((status & 0x2) == 1)
 			pr_info("Send pending fail!\n");
 		if ((status & 0x4) == 0)
@@ -316,7 +320,7 @@ static inline int nlm_fmn_receive(int bucket, int *size, int *code, int *stid,
 
 	/* wait for load pending to clear */
 	do {
-		status = nlm_read_c2_status(1);
+		status = nlm_read_c2_status0();
 	} while ((status & 0x08) != 0);
 
 	/* receive error bits */

arch/mips/include/asm/octeon/cvmx-bootinfo.h

@@ -227,6 +227,7 @@ enum cvmx_board_types_enum {
 	 * use any numbers in this range.
 	 */
 	CVMX_BOARD_TYPE_CUST_PRIVATE_MIN = 20001,
+	CVMX_BOARD_TYPE_UBNT_E100 = 20002,
 	CVMX_BOARD_TYPE_CUST_PRIVATE_MAX = 30000,
 
 	/* The remaining range is reserved for future use. */
@@ -325,6 +326,7 @@ static inline const char *cvmx_board_type_to_string(enum
 
 		    /* Customer private range */
 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MIN)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E100)
 		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MAX)
 	}
 	return "Unsupported Board";

arch/mips/include/asm/page.h

@@ -205,10 +205,8 @@ extern int __virt_addr_valid(const volatile void *kaddr);
 #define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
 				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
-#define UNCAC_ADDR(addr)	((addr) - PAGE_OFFSET + UNCAC_BASE +	\
-								PHYS_OFFSET)
-#define CAC_ADDR(addr)		((addr) - UNCAC_BASE + PAGE_OFFSET -	\
-								PHYS_OFFSET)
+#define UNCAC_ADDR(addr)	((addr) - PAGE_OFFSET + UNCAC_BASE)
+#define CAC_ADDR(addr)		((addr) - UNCAC_BASE + PAGE_OFFSET)
 
 #include <asm-generic/memory_model.h>
 #include <asm-generic/getorder.h>

arch/mips/include/asm/pci.h

@@ -52,7 +52,6 @@ struct pci_controller {
 /*
  * Used by boards to register their PCI busses before the actual scanning.
  */
-extern struct pci_controller * alloc_pci_controller(void);
 extern void register_pci_controller(struct pci_controller *hose);
 
 /*

arch/mips/include/asm/processor.h

@@ -137,7 +137,7 @@ union mips_watch_reg_state {
 	struct mips3264_watch_reg_state mips3264;
 };
 
-#ifdef CONFIG_CPU_CAVIUM_OCTEON
+#if defined(CONFIG_CPU_CAVIUM_OCTEON)
 
 struct octeon_cop2_state {
 	/* DMFC2 rt, 0x0201 */
@@ -182,13 +182,26 @@ struct octeon_cop2_state {
 	/* DMFC2 rt, 0x025A; DMFC2 rt, 0x025B - Pass2 */
 	unsigned long	cop2_gfm_result[2];
 };
-#define INIT_OCTEON_COP2 {0,}
+#define COP2_INIT						\
+	.cp2			= {0,},
 
 struct octeon_cvmseg_state {
 	unsigned long cvmseg[CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE]
 			    [cpu_dcache_line_size() / sizeof(unsigned long)];
 };
 
+#elif defined(CONFIG_CPU_XLP)
+struct nlm_cop2_state {
+	u64	rx[4];
+	u64	tx[4];
+	u32	tx_msg_status;
+	u32	rx_msg_status;
+};
+
+#define COP2_INIT						\
+	.cp2			= {{0}, {0}, 0, 0},
+#else
+#define COP2_INIT
 #endif
 
 typedef struct {
@@ -233,6 +246,9 @@ struct thread_struct {
 #ifdef CONFIG_CPU_CAVIUM_OCTEON
 	struct octeon_cop2_state cp2 __attribute__ ((__aligned__(128)));
 	struct octeon_cvmseg_state cvmseg __attribute__ ((__aligned__(128)));
+#endif
+#ifdef CONFIG_CPU_XLP
+	struct nlm_cop2_state cp2;
 #endif
 	struct mips_abi *abi;
 };
@@ -245,13 +261,6 @@ struct thread_struct {
 #define FPAFF_INIT
 #endif /* CONFIG_MIPS_MT_FPAFF */
 
-#ifdef CONFIG_CPU_CAVIUM_OCTEON
-#define OCTEON_INIT						\
-	.cp2			= INIT_OCTEON_COP2,
-#else
-#define OCTEON_INIT
-#endif /* CONFIG_CPU_CAVIUM_OCTEON */
-
 #define INIT_THREAD  {						\
 	/*							\
 	 * Saved main processor registers			\
@@ -300,9 +309,9 @@ struct thread_struct {
 	.cp0_baduaddr		= 0,				\
 	.error_code		= 0,				\
 	/*							\
-	 * Cavium Octeon specifics (null if not Octeon)		\
+	 * Platform specific cop2 registers(null if no COP2)	\
 	 */							\
-	OCTEON_INIT						\
+	COP2_INIT						\
 }
 
 struct task_struct;

arch/mips/include/asm/stackframe.h

@@ -69,6 +69,14 @@
 		LONG_S	$24, PT_R24(sp)
 #ifndef CONFIG_CPU_HAS_SMARTMIPS
 		LONG_S	v1, PT_LO(sp)
+#endif
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+		/*
+		 * The Octeon multiplier state is affected by general
+		 * multiply instructions. It must be saved before and
+		 * kernel code might corrupt it
+		 */
+		jal     octeon_mult_save
 #endif
 		.endm
 
@@ -220,15 +228,6 @@
 #ifdef CONFIG_CPU_CAVIUM_OCTEON
 		.set    mips64
 		pref    0, 0($28)       /* Prefetch the current pointer */
-		pref	0, PT_R31(sp)	/* Prefetch the $31(ra) */
-		/* The Octeon multiplier state is affected by general multiply
-		    instructions. It must be saved before and kernel code might
-		    corrupt it */
-		jal	octeon_mult_save
-		LONG_L	v1, 0($28)  /* Load the current pointer */
-			 /* Restore $31(ra) that was changed by the jal */
-		LONG_L	ra, PT_R31(sp)
-		pref	0, 0(v1)    /* Prefetch the current thread */
 #endif
 		.set	pop
 		.endm
@@ -248,6 +247,10 @@
 		.endm
 
 		.macro	RESTORE_TEMP
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+		/* Restore the Octeon multiplier state */
+		jal	octeon_mult_restore
+#endif
 #ifdef CONFIG_CPU_HAS_SMARTMIPS
 		LONG_L	$24, PT_ACX(sp)
 		mtlhx	$24
@@ -360,10 +363,6 @@
 		DVPE	5				# dvpe a1
 		jal	mips_ihb
 #endif /* CONFIG_MIPS_MT_SMTC */
-#ifdef CONFIG_CPU_CAVIUM_OCTEON
-		/* Restore the Octeon multiplier state */
-		jal	octeon_mult_restore
-#endif
 		mfc0	a0, CP0_STATUS
 		ori	a0, STATMASK
 		xori	a0, STATMASK

arch/mips/include/asm/stackprotector.h

+/*
+ * GCC stack protector support.
+ *
+ * (This is directly adopted from the ARM implementation)
+ *
+ * Stack protector works by putting predefined pattern at the start of
+ * the stack frame and verifying that it hasn't been overwritten when
+ * returning from the function.  The pattern is called stack canary
+ * and gcc expects it to be defined by a global variable called
+ * "__stack_chk_guard" on MIPS.  This unfortunately means that on SMP
+ * we cannot have a different canary value per task.
+ */
+
+#ifndef _ASM_STACKPROTECTOR_H
+#define _ASM_STACKPROTECTOR_H 1
+
+#include <linux/random.h>
+#include <linux/version.h>
+
+extern unsigned long __stack_chk_guard;
+
+/*
+ * Initialize the stackprotector canary value.
+ *
+ * NOTE: this must only be called from functions that never return,
+ * and it must always be inlined.
+ */
+static __always_inline void boot_init_stack_canary(void)
+{
+	unsigned long canary;
+
+	/* Try to get a semi random initial value. */
+	get_random_bytes(&canary, sizeof(canary));
+	canary ^= LINUX_VERSION_CODE;
+
+	current->stack_canary = canary;
+	__stack_chk_guard = current->stack_canary;
+}
+
+#endif	/* _ASM_STACKPROTECTOR_H */

arch/mips/include/asm/switch_to.h

@@ -15,6 +15,7 @@
 #include <asm/cpu-features.h>
 #include <asm/watch.h>
 #include <asm/dsp.h>
+#include <asm/cop2.h>
 
 struct task_struct;
 
@@ -66,10 +67,18 @@ do {									\
 
 #define switch_to(prev, next, last)					\
 do {									\
-	u32 __usedfpu;							\
+	u32 __usedfpu, __c0_stat;					\
 	__mips_mt_fpaff_switch_to(prev);				\
 	if (cpu_has_dsp)						\
 		__save_dsp(prev);					\
+	if (cop2_present && (KSTK_STATUS(prev) & ST0_CU2)) {		\
+		if (cop2_lazy_restore)					\
+			KSTK_STATUS(prev) &= ~ST0_CU2;			\
+		__c0_stat = read_c0_status();				\
+		write_c0_status(__c0_stat | ST0_CU2);			\
+		cop2_save(&prev->thread.cp2);				\
+		write_c0_status(__c0_stat & ~ST0_CU2);			\
+	}								\
 	__clear_software_ll_bit();					\
 	__usedfpu = test_and_clear_tsk_thread_flag(prev, TIF_USEDFPU);	\
 	(last) = resume(prev, next, task_thread_info(next), __usedfpu); \
@@ -77,6 +86,14 @@ do {									\
 
 #define finish_arch_switch(prev)					\
 do {									\
+	u32 __c0_stat;							\
+	if (cop2_present && !cop2_lazy_restore &&			\
+			(KSTK_STATUS(current) & ST0_CU2)) {		\
+		__c0_stat = read_c0_status();				\
+		write_c0_status(__c0_stat | ST0_CU2);			\
+		cop2_restore(&current->thread.cp2);			\
+		write_c0_status(__c0_stat & ~ST0_CU2);			\
+	}								\
 	if (cpu_has_dsp)						\
 		__restore_dsp(current);					\
 	if (cpu_has_userlocal)						\

arch/mips/include/asm/thread_info.h

@@ -109,6 +109,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal() */
 #define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
+#define TIF_NOHZ		19	/* in adaptive nohz mode */
 #define TIF_FIXADE		20	/* Fix address errors in software */
 #define TIF_LOGADE		21	/* Log address errors to syslog */
 #define TIF_32BIT_REGS		22	/* also implies 16/32 fprs */
@@ -124,6 +125,7 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_SECCOMP		(1<<TIF_SECCOMP)
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_USEDFPU		(1<<TIF_USEDFPU)
+#define _TIF_NOHZ		(1<<TIF_NOHZ)
 #define _TIF_FIXADE		(1<<TIF_FIXADE)
 #define _TIF_LOGADE		(1<<TIF_LOGADE)
 #define _TIF_32BIT_REGS		(1<<TIF_32BIT_REGS)
@@ -131,14 +133,19 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_FPUBOUND		(1<<TIF_FPUBOUND)
 #define _TIF_LOAD_WATCH		(1<<TIF_LOAD_WATCH)
 
+#define _TIF_WORK_SYSCALL_ENTRY	(_TIF_NOHZ | _TIF_SYSCALL_TRACE |	\
+				 _TIF_SYSCALL_AUDIT)
+
 /* work to do in syscall_trace_leave() */
-#define _TIF_WORK_SYSCALL_EXIT	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT)
+#define _TIF_WORK_SYSCALL_EXIT	(_TIF_NOHZ | _TIF_SYSCALL_TRACE |	\
+				 _TIF_SYSCALL_AUDIT)
 
 /* work to do on interrupt/exception return */
 #define _TIF_WORK_MASK		\
 	(_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_NOTIFY_RESUME)
 /* work to do on any return to u-space */
-#define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK | _TIF_WORK_SYSCALL_EXIT)
+#define _TIF_ALLWORK_MASK	(_TIF_NOHZ | _TIF_WORK_MASK |		\
+				 _TIF_WORK_SYSCALL_EXIT)
 
 #endif /* __KERNEL__ */
 

arch/mips/include/asm/xtalk/xtalk.h

@@ -47,6 +47,15 @@ typedef struct xtalk_piomap_s *xtalk_piomap_t;
 #define XIO_PORT(x)	((xwidgetnum_t)(((x)&XIO_PORT_BITS) >> XIO_PORT_SHIFT))
 #define XIO_PACK(p, o)	((((uint64_t)(p))<<XIO_PORT_SHIFT) | ((o)&XIO_ADDR_BITS))
 
+#ifdef CONFIG_PCI
+extern int bridge_probe(nasid_t nasid, int widget, int masterwid);
+#else
+static inline int bridge_probe(nasid_t nasid, int widget, int masterwid)
+{
+	return 0;
+}
+#endif
+
 #endif /* !__ASSEMBLY__ */
 
 #endif /* _ASM_XTALK_XTALK_H */

arch/mips/include/uapi/asm/fcntl.h

@@ -5,9 +5,10 @@
  *
  * Copyright (C) 1995, 96, 97, 98, 99, 2003, 05 Ralf Baechle
  */
-#ifndef _ASM_FCNTL_H
-#define _ASM_FCNTL_H
+#ifndef _UAPI_ASM_FCNTL_H
+#define _UAPI_ASM_FCNTL_H
 
+#include <asm/sgidefs.h>
 
 #define O_APPEND	0x0008
 #define O_DSYNC		0x0010	/* used to be O_SYNC, see below */
@@ -55,14 +56,15 @@
  * contain all the same fields as struct flock.
  */
 
-#ifdef CONFIG_32BIT
+#if _MIPS_SIM != _MIPS_SIM_ABI64
+
 #include <linux/types.h>
 
 struct flock {
 	short	l_type;
 	short	l_whence;
-	off_t	l_start;
-	off_t	l_len;
+	__kernel_off_t	l_start;
+	__kernel_off_t	l_len;
 	long	l_sysid;
 	__kernel_pid_t l_pid;
 	long	pad[4];
@@ -70,8 +72,8 @@ struct flock {
 
 #define HAVE_ARCH_STRUCT_FLOCK
 
-#endif /* CONFIG_32BIT */
+#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
 #include <asm-generic/fcntl.h>
 
-#endif /* _ASM_FCNTL_H */
+#endif /* _UAPI_ASM_FCNTL_H */

arch/mips/include/uapi/asm/inst.h

@@ -409,10 +409,11 @@ enum mm_32f_73_minor_op {
 enum mm_16c_minor_op {
 	mm_lwm16_op = 0x04,
 	mm_swm16_op = 0x05,
-	mm_jr16_op = 0x18,
-	mm_jrc_op = 0x1a,
-	mm_jalr16_op = 0x1c,
-	mm_jalrs16_op = 0x1e,
+	mm_jr16_op = 0x0c,
+	mm_jrc_op = 0x0d,
+	mm_jalr16_op = 0x0e,
+	mm_jalrs16_op = 0x0f,
+	mm_jraddiusp_op = 0x18,
 };
 
 /*

arch/mips/include/uapi/asm/msgbuf.h

@@ -14,25 +14,25 @@
 
 struct msqid64_ds {
 	struct ipc64_perm msg_perm;
-#if defined(CONFIG_32BIT) && !defined(CONFIG_CPU_LITTLE_ENDIAN)
+#if !defined(__mips64) && defined(__MIPSEB__)
 	unsigned long	__unused1;
 #endif
 	__kernel_time_t msg_stime;	/* last msgsnd time */
-#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_LITTLE_ENDIAN)
+#if !defined(__mips64) && defined(__MIPSEL__)
 	unsigned long	__unused1;
 #endif
-#if defined(CONFIG_32BIT) && !defined(CONFIG_CPU_LITTLE_ENDIAN)
+#if !defined(__mips64) && defined(__MIPSEB__)
 	unsigned long	__unused2;
 #endif
 	__kernel_time_t msg_rtime;	/* last msgrcv time */
-#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_LITTLE_ENDIAN)
+#if !defined(__mips64) && defined(__MIPSEL__)
 	unsigned long	__unused2;
 #endif
-#if defined(CONFIG_32BIT) && !defined(CONFIG_CPU_LITTLE_ENDIAN)
+#if !defined(__mips64) && defined(__MIPSEB__)
 	unsigned long	__unused3;
 #endif
 	__kernel_time_t msg_ctime;	/* last change time */
-#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_LITTLE_ENDIAN)
+#if !defined(__mips64) && defined(__MIPSEL__)
 	unsigned long	__unused3;
 #endif
 	unsigned long  msg_cbytes;	/* current number of bytes on queue */

arch/mips/include/uapi/asm/resource.h

@@ -26,7 +26,7 @@
  * but we keep the old value on MIPS32,
  * for compatibility:
  */
-#ifdef CONFIG_32BIT
+#ifndef __mips64
 # define RLIM_INFINITY		0x7fffffffUL
 #endif
 

arch/mips/include/uapi/asm/siginfo.h

@@ -25,10 +25,10 @@ struct siginfo;
 /*
  * Careful to keep union _sifields from shifting ...
  */
-#ifdef CONFIG_32BIT
+#if __SIZEOF_LONG__ == 4
 #define __ARCH_SI_PREAMBLE_SIZE (3 * sizeof(int))
 #endif
-#ifdef CONFIG_64BIT
+#if __SIZEOF_LONG__ == 8
 #define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int))
 #endif
 

arch/mips/include/uapi/asm/swab.h

@@ -13,7 +13,7 @@
 
 #define __SWAB_64_THRU_32__
 
-#ifdef CONFIG_CPU_MIPSR2
+#if defined(__mips_isa_rev) && (__mips_isa_rev >= 2)
 
 static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
 {
@@ -39,10 +39,10 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 #define __arch_swab32 __arch_swab32
 
 /*
- * Having already checked for CONFIG_CPU_MIPSR2, enable the
- * optimized version for 64-bit kernel on r2 CPUs.
+ * Having already checked for MIPS R2, enable the optimized version for
+ * 64-bit kernel on r2 CPUs.
  */
-#ifdef CONFIG_64BIT
+#ifdef __mips64
 static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
 {
 	__asm__(
@@ -54,6 +54,6 @@ static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
 	return x;
 }
 #define __arch_swab64 __arch_swab64
-#endif /* CONFIG_64BIT */
-#endif /* CONFIG_CPU_MIPSR2 */
+#endif /* __mips64 */
+#endif /* MIPS R2 or newer  */
 #endif /* _ASM_SWAB_H */

arch/mips/kernel/asm-offsets.c

@@ -82,6 +82,9 @@ void output_task_defines(void)
 	OFFSET(TASK_FLAGS, task_struct, flags);
 	OFFSET(TASK_MM, task_struct, mm);
 	OFFSET(TASK_PID, task_struct, pid);
+#if defined(CONFIG_CC_STACKPROTECTOR)
+	OFFSET(TASK_STACK_CANARY, task_struct, stack_canary);
+#endif
 	DEFINE(TASK_STRUCT_SIZE, sizeof(struct task_struct));
 	BLANK();
 }

arch/mips/kernel/branch.c

@@ -467,5 +467,4 @@ int __compute_return_epc(struct pt_regs *regs)
 	printk("%s: unaligned epc - sending SIGBUS.\n", current->comm);
 	force_sig(SIGBUS, current);
 	return -EFAULT;
-
 }

arch/mips/kernel/cpu-bugs64.c

@@ -6,6 +6,7 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
+#include <linux/context_tracking.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/ptrace.h>
@@ -171,8 +172,12 @@ static volatile int daddi_ov __cpuinitdata;
 
 asmlinkage void __init do_daddi_ov(struct pt_regs *regs)
 {
+	enum ctx_state prev_state;
+
+	prev_state = exception_enter();
 	daddi_ov = 1;
 	regs->cp0_epc += 4;
+	exception_exit(prev_state);
 }
 
 static inline void check_daddi(void)

arch/mips/kernel/cpu-probe.c

@@ -146,8 +146,7 @@ static void __cpuinit set_isa(struct cpuinfo_mips *c, unsigned int isa)
 	case MIPS_CPU_ISA_IV:
 		c->isa_level |= MIPS_CPU_ISA_IV;
 	case MIPS_CPU_ISA_III:
-		c->isa_level |= MIPS_CPU_ISA_I | MIPS_CPU_ISA_II |
-				MIPS_CPU_ISA_III;
+		c->isa_level |= MIPS_CPU_ISA_II | MIPS_CPU_ISA_III;
 		break;
 
 	case MIPS_CPU_ISA_M32R2:
@@ -156,8 +155,6 @@ static void __cpuinit set_isa(struct cpuinfo_mips *c, unsigned int isa)
 		c->isa_level |= MIPS_CPU_ISA_M32R1;
 	case MIPS_CPU_ISA_II:
 		c->isa_level |= MIPS_CPU_ISA_II;
-	case MIPS_CPU_ISA_I:
-		c->isa_level |= MIPS_CPU_ISA_I;
 		break;
 	}
 }
@@ -272,9 +269,6 @@ static inline unsigned int decode_config3(struct cpuinfo_mips *c)
 		c->options |= MIPS_CPU_ULRI;
 	if (config3 & MIPS_CONF3_ISA)
 		c->options |= MIPS_CPU_MICROMIPS;
-#ifdef CONFIG_CPU_MICROMIPS
-	write_c0_config3(read_c0_config3() | MIPS_CONF3_ISA_OE);
-#endif
 	if (config3 & MIPS_CONF3_VZ)
 		c->ases |= MIPS_ASE_VZ;
 
@@ -332,7 +326,6 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 	case PRID_IMP_R2000:
 		c->cputype = CPU_R2000;
 		__cpu_name[cpu] = "R2000";
-		set_isa(c, MIPS_CPU_ISA_I);
 		c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
 			     MIPS_CPU_NOFPUEX;
 		if (__cpu_has_fpu())
@@ -352,7 +345,6 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 			c->cputype = CPU_R3000;
 			__cpu_name[cpu] = "R3000";
 		}
-		set_isa(c, MIPS_CPU_ISA_I);
 		c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
 			     MIPS_CPU_NOFPUEX;
 		if (__cpu_has_fpu())
@@ -455,7 +447,6 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		break;
 	#endif
 	case PRID_IMP_TX39:
-		set_isa(c, MIPS_CPU_ISA_I);
 		c->options = MIPS_CPU_TLB | MIPS_CPU_TX39_CACHE;
 
 		if ((c->processor_id & 0xf0) == (PRID_REV_TX3927 & 0xf0)) {
@@ -959,6 +950,7 @@ static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu)
 		set_isa(c, MIPS_CPU_ISA_M64R1);
 		c->tlbsize = ((read_c0_config1() >> 25) & 0x3f) + 1;
 	}
+	c->kscratch_mask = 0xf;
 }
 
 #ifdef CONFIG_64BIT

arch/mips/kernel/head.S

@@ -27,45 +27,6 @@
 
 #include <kernel-entry-init.h>
 
-	/*
-	 * inputs are the text nasid in t1, data nasid in t2.
-	 */
-	.macro MAPPED_KERNEL_SETUP_TLB
-#ifdef CONFIG_MAPPED_KERNEL
-	/*
-	 * This needs to read the nasid - assume 0 for now.
-	 * Drop in 0xffffffffc0000000 in tlbhi, 0+VG in tlblo_0,
-	 * 0+DVG in tlblo_1.
-	 */
-	dli	t0, 0xffffffffc0000000
-	dmtc0	t0, CP0_ENTRYHI
-	li	t0, 0x1c000		# Offset of text into node memory
-	dsll	t1, NASID_SHFT		# Shift text nasid into place
-	dsll	t2, NASID_SHFT		# Same for data nasid
-	or	t1, t1, t0		# Physical load address of kernel text
-	or	t2, t2, t0		# Physical load address of kernel data
-	dsrl	t1, 12			# 4K pfn
-	dsrl	t2, 12			# 4K pfn
-	dsll	t1, 6			# Get pfn into place
-	dsll	t2, 6			# Get pfn into place
-	li	t0, ((_PAGE_GLOBAL|_PAGE_VALID| _CACHE_CACHABLE_COW) >> 6)
-	or	t0, t0, t1
-	mtc0	t0, CP0_ENTRYLO0	# physaddr, VG, cach exlwr
-	li	t0, ((_PAGE_GLOBAL|_PAGE_VALID| _PAGE_DIRTY|_CACHE_CACHABLE_COW) >> 6)
-	or	t0, t0, t2
-	mtc0	t0, CP0_ENTRYLO1	# physaddr, DVG, cach exlwr
-	li	t0, 0x1ffe000		# MAPPED_KERN_TLBMASK, TLBPGMASK_16M
-	mtc0	t0, CP0_PAGEMASK
-	li	t0, 0			# KMAP_INX
-	mtc0	t0, CP0_INDEX
-	li	t0, 1
-	mtc0	t0, CP0_WIRED
-	tlbwi
-#else
-	mtc0	zero, CP0_WIRED
-#endif
-	.endm
-
 	/*
 	 * For the moment disable interrupts, mark the kernel mode and
 	 * set ST0_KX so that the CPU does not spit fire when using

arch/mips/kernel/irq-gic.c

@@ -219,7 +219,7 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *cpumask,
 
 	/* Assumption : cpumask refers to a single CPU */
 	spin_lock_irqsave(&gic_lock, flags);
-	for (;;) {
+
 	/* Re-route this IRQ */
 	GIC_SH_MAP_TO_VPE_SMASK(irq, first_cpu(tmp));
 
@@ -228,7 +228,6 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *cpumask,
 		clear_bit(irq, pcpu_masks[i].pcpu_mask);
 	set_bit(irq, pcpu_masks[first_cpu(tmp)].pcpu_mask);
 
-	}
 	cpumask_copy(d->affinity, cpumask);
 	spin_unlock_irqrestore(&gic_lock, flags);
 

arch/mips/kernel/mcount.S

@@ -168,14 +168,10 @@ NESTED(ftrace_graph_caller, PT_SIZE, ra)
 #endif
 
 	/* arg3: Get frame pointer of current stack */
-#ifdef CONFIG_FRAME_POINTER
-	move	a2, fp
-#else /* ! CONFIG_FRAME_POINTER */
 #ifdef CONFIG_64BIT
 	PTR_LA	a2, PT_SIZE(sp)
 #else
 	PTR_LA	a2, (PT_SIZE+8)(sp)
-#endif
 #endif
 
 	jal	prepare_ftrace_return

arch/mips/kernel/octeon_switch.S

@@ -40,33 +40,6 @@
 	cpu_save_nonscratch a0
 	LONG_S	ra, THREAD_REG31(a0)
 
-	/* check if we need to save COP2 registers */
-	PTR_L	t2, TASK_THREAD_INFO(a0)
-	LONG_L	t0, ST_OFF(t2)
-	bbit0	t0, 30, 1f
-
-	/* Disable COP2 in the stored process state */
-	li	t1, ST0_CU2
-	xor	t0, t1
-	LONG_S	t0, ST_OFF(t2)
-
-	/* Enable COP2 so we can save it */
-	mfc0	t0, CP0_STATUS
-	or	t0, t1
-	mtc0	t0, CP0_STATUS
-
-	/* Save COP2 */
-	daddu	a0, THREAD_CP2
-	jal octeon_cop2_save
-	dsubu	a0, THREAD_CP2
-
-	/* Disable COP2 now that we are done */
-	mfc0	t0, CP0_STATUS
-	li	t1, ST0_CU2
-	xor	t0, t1
-	mtc0	t0, CP0_STATUS
-
-1:
 #if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
 	/* Check if we need to store CVMSEG state */
 	mfc0	t0, $11,7	/* CvmMemCtl */
@@ -98,6 +71,13 @@
 	mtc0	t0, $11,7	/* CvmMemCtl */
 #endif
 3:
+
+#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
+	PTR_L	t8, __stack_chk_guard
+	LONG_L	t9, TASK_STACK_CANARY(a1)
+	LONG_S	t9, 0(t8)
+#endif
+
 	/*
 	 * The order of restoring the registers takes care of the race
 	 * updating $28, $29 and kernelsp without disabling ints.

arch/mips/kernel/proc.c

@@ -66,9 +66,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		seq_printf(m, "]\n");
 	}
 	if (cpu_has_mips_r) {
-		seq_printf(m, "isa\t\t\t:");
-		if (cpu_has_mips_1)
-			seq_printf(m, "%s", " mips1");
+		seq_printf(m, "isa\t\t\t: mips1");
 		if (cpu_has_mips_2)
 			seq_printf(m, "%s", " mips2");
 		if (cpu_has_mips_3)

arch/mips/kernel/process.c

@@ -201,9 +201,12 @@ int dump_task_fpu(struct task_struct *t, elf_fpregset_t *fpr)
 	return 1;
 }
 
-/*
- *
- */
+#ifdef CONFIG_CC_STACKPROTECTOR
+#include <linux/stackprotector.h>
+unsigned long __stack_chk_guard __read_mostly;
+EXPORT_SYMBOL(__stack_chk_guard);
+#endif
+
 struct mips_frame_info {
 	void		*func;
 	unsigned long	func_size;

arch/mips/kernel/prom.c

@@ -30,7 +30,7 @@ __init void mips_set_machine_name(const char *name)
 	if (name == NULL)
 		return;
 
-	strncpy(mips_machine_name, name, sizeof(mips_machine_name));
+	strlcpy(mips_machine_name, name, sizeof(mips_machine_name));
 	pr_info("MIPS: machine is %s\n", mips_get_machine_name());
 }
 

arch/mips/kernel/ptrace.c

@@ -15,6 +15,7 @@
  * binaries.
  */
 #include <linux/compiler.h>
+#include <linux/context_tracking.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
@@ -534,6 +535,8 @@ static inline int audit_arch(void)
  */
 asmlinkage void syscall_trace_enter(struct pt_regs *regs)
 {
+	user_exit();
+
 	/* do the secure computing check first */
 	secure_computing_strict(regs->regs[2]);
 
@@ -570,6 +573,13 @@ asmlinkage void syscall_trace_enter(struct pt_regs *regs)
  */
 asmlinkage void syscall_trace_leave(struct pt_regs *regs)
 {
+        /*
+	 * We may come here right after calling schedule_user()
+	 * or do_notify_resume(), in which case we can be in RCU
+	 * user mode.
+	 */
+	user_exit();
+
 	audit_syscall_exit(regs);
 
 	if (!(current->ptrace & PT_PTRACED))
@@ -592,4 +602,6 @@ asmlinkage void syscall_trace_leave(struct pt_regs *regs)
 		send_sig(current->exit_code, current, 1);
 		current->exit_code = 0;
 	}
+
+	user_enter();
 }

arch/mips/kernel/r2300_switch.S

@@ -65,6 +65,13 @@ LEAF(resume)
 	fpu_save_single a0, t0			# clobbers t0
 
 1:
+
+#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
+	PTR_L	t8, __stack_chk_guard
+	LONG_L	t9, TASK_STACK_CANARY(a1)
+	LONG_S	t9, 0(t8)
+#endif
+
 	/*
 	 * The order of restoring the registers takes care of the race
 	 * updating $28, $29 and kernelsp without disabling ints.

arch/mips/kernel/r4k_switch.S

@@ -68,6 +68,12 @@
 						# clobbers t1
 1:
 
+#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
+	PTR_L	t8, __stack_chk_guard
+	LONG_L	t9, TASK_STACK_CANARY(a1)
+	LONG_S	t9, 0(t8)
+#endif
+
 	/*
 	 * The order of restoring the registers takes care of the race
 	 * updating $28, $29 and kernelsp without disabling ints.

arch/mips/kernel/rtlx.c

@@ -437,7 +437,6 @@ static ssize_t file_write(struct file *file, const char __user * buffer,
 			  size_t count, loff_t * ppos)
 {
 	int minor = iminor(file_inode(file));
-	struct rtlx_channel *rt = &rtlx->channel[minor];
 
 	/* any space left... */
 	if (!rtlx_write_poll(minor)) {

arch/mips/kernel/scall32-o32.S

@@ -52,7 +52,7 @@ NESTED(handle_sys, PT_SIZE, sp)
 
 stack_done:
 	lw	t0, TI_FLAGS($28)	# syscall tracing enabled?
-	li	t1, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
+	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	and	t0, t1
 	bnez	t0, syscall_trace_entry # -> yes
 

arch/mips/kernel/scall64-64.S

@@ -54,7 +54,7 @@ NESTED(handle_sys64, PT_SIZE, sp)
 
 	sd	a3, PT_R26(sp)		# save a3 for syscall restarting
 
-	li	t1, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
+	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	LONG_L	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	and	t0, t1, t0
 	bnez	t0, syscall_trace_entry

arch/mips/kernel/scall64-n32.S

@@ -47,7 +47,7 @@ NESTED(handle_sysn32, PT_SIZE, sp)
 
 	sd	a3, PT_R26(sp)		# save a3 for syscall restarting
 
-	li	t1, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
+	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	LONG_L	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	and	t0, t1, t0
 	bnez	t0, n32_syscall_trace_entry

arch/mips/kernel/scall64-o32.S

@@ -81,7 +81,7 @@ NESTED(handle_sys, PT_SIZE, sp)
 	PTR	4b, bad_stack
 	.previous
 
-	li	t1, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
+	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	LONG_L	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	and	t0, t1, t0
 	bnez	t0, trace_a_syscall

arch/mips/kernel/signal.c

@@ -8,6 +8,7 @@
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  */
 #include <linux/cache.h>
+#include <linux/context_tracking.h>
 #include <linux/irqflags.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
@@ -573,6 +574,8 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused,
 {
 	local_irq_enable();
 
+	user_exit();
+
 	/* deal with pending signal delivery */
 	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(regs);
@@ -581,6 +584,8 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused,
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
 	}
+
+	user_enter();
 }
 
 #ifdef CONFIG_SMP

arch/mips/kernel/smp-bmips.c

@@ -63,7 +63,7 @@ static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id);
 
 static void __init bmips_smp_setup(void)
 {
-	int i;
+	int i, cpu = 1, boot_cpu = 0;
 
 #if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
 	/* arbitration priority */
@@ -72,13 +72,22 @@ static void __init bmips_smp_setup(void)
 	/* NBK and weak order flags */
 	set_c0_brcm_config_0(0x30000);
 
+	/* Find out if we are running on TP0 or TP1 */
+	boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
+
 	/*
 	 * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other thread
 	 * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
 	 * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
+	 *
+	 * If booting from TP1, leave the existing CMT interrupt routing
+	 * such that TP0 responds to SW1 and TP1 responds to SW0.
 	 */
+	if (boot_cpu == 0)
 		change_c0_brcm_cmt_intr(0xf8018000,
 					(0x02 << 27) | (0x03 << 15));
+	else
+		change_c0_brcm_cmt_intr(0xf8018000, (0x1d << 27));
 
 	/* single core, 2 threads (2 pipelines) */
 	max_cpus = 2;
@@ -106,9 +115,15 @@ static void __init bmips_smp_setup(void)
 	if (!board_ebase_setup)
 		board_ebase_setup = &bmips_ebase_setup;
 
+	__cpu_number_map[boot_cpu] = 0;
+	__cpu_logical_map[0] = boot_cpu;
+
 	for (i = 0; i < max_cpus; i++) {
-		__cpu_number_map[i] = 1;
-		__cpu_logical_map[i] = 1;
+		if (i != boot_cpu) {
+			__cpu_number_map[i] = cpu;
+			__cpu_logical_map[cpu] = i;
+			cpu++;
+		}
 		set_cpu_possible(i, 1);
 		set_cpu_present(i, 1);
 	}
@@ -157,6 +172,8 @@ static void bmips_boot_secondary(int cpu, struct task_struct *idle)
 		bmips_send_ipi_single(cpu, 0);
 	else {
 #if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
+		/* Reset slave TP1 if booting from TP0 */
+		if (cpu_logical_map(cpu) == 0)
 			set_c0_brcm_cmt_ctrl(0x01);
 #elif defined(CONFIG_CPU_BMIPS5000)
 		if (cpu & 0x01)

arch/mips/kernel/traps.c

@@ -13,6 +13,7 @@
  */
 #include <linux/bug.h>
 #include <linux/compiler.h>
+#include <linux/context_tracking.h>
 #include <linux/kexec.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -264,7 +265,7 @@ static void __show_regs(const struct pt_regs *regs)
 
 	printk("Status: %08x	", (uint32_t) regs->cp0_status);
 
-	if (current_cpu_data.isa_level == MIPS_CPU_ISA_I) {
+	if (cpu_has_3kex) {
 		if (regs->cp0_status & ST0_KUO)
 			printk("KUo ");
 		if (regs->cp0_status & ST0_IEO)
@@ -277,7 +278,7 @@ static void __show_regs(const struct pt_regs *regs)
 			printk("KUc ");
 		if (regs->cp0_status & ST0_IEC)
 			printk("IEc ");
-	} else {
+	} else if (cpu_has_4kex) {
 		if (regs->cp0_status & ST0_KX)
 			printk("KX ");
 		if (regs->cp0_status & ST0_SX)
@@ -423,7 +424,9 @@ asmlinkage void do_be(struct pt_regs *regs)
 	const struct exception_table_entry *fixup = NULL;
 	int data = regs->cp0_cause & 4;
 	int action = MIPS_BE_FATAL;
+	enum ctx_state prev_state;
 
+	prev_state = exception_enter();
 	/* XXX For now.	 Fixme, this searches the wrong table ...  */
 	if (data && !user_mode(regs))
 		fixup = search_dbe_tables(exception_epc(regs));
@@ -436,11 +439,11 @@ asmlinkage void do_be(struct pt_regs *regs)
 
 	switch (action) {
 	case MIPS_BE_DISCARD:
-		return;
+		goto out;
 	case MIPS_BE_FIXUP:
 		if (fixup) {
 			regs->cp0_epc = fixup->nextinsn;
-			return;
+			goto out;
 		}
 		break;
 	default:
@@ -455,10 +458,13 @@ asmlinkage void do_be(struct pt_regs *regs)
 	       field, regs->cp0_epc, field, regs->regs[31]);
 	if (notify_die(DIE_OOPS, "bus error", regs, 0, regs_to_trapnr(regs), SIGBUS)
 	    == NOTIFY_STOP)
-		return;
+		goto out;
 
 	die_if_kernel("Oops", regs);
 	force_sig(SIGBUS, current);
+
+out:
+	exception_exit(prev_state);
 }
 
 /*
@@ -673,8 +679,10 @@ static int simulate_sync(struct pt_regs *regs, unsigned int opcode)
 
 asmlinkage void do_ov(struct pt_regs *regs)
 {
+	enum ctx_state prev_state;
 	siginfo_t info;
 
+	prev_state = exception_enter();
 	die_if_kernel("Integer overflow", regs);
 
 	info.si_code = FPE_INTOVF;
@@ -682,6 +690,7 @@ asmlinkage void do_ov(struct pt_regs *regs)
 	info.si_errno = 0;
 	info.si_addr = (void __user *) regs->cp0_epc;
 	force_sig_info(SIGFPE, &info, current);
+	exception_exit(prev_state);
 }
 
 int process_fpemu_return(int sig, void __user *fault_addr)
@@ -713,11 +722,13 @@ int process_fpemu_return(int sig, void __user *fault_addr)
  */
 asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 {
+	enum ctx_state prev_state;
 	siginfo_t info = {0};
 
+	prev_state = exception_enter();
 	if (notify_die(DIE_FP, "FP exception", regs, 0, regs_to_trapnr(regs), SIGFPE)
 	    == NOTIFY_STOP)
-		return;
+		goto out;
 	die_if_kernel("FP exception in kernel code", regs);
 
 	if (fcr31 & FPU_CSR_UNI_X) {
@@ -753,7 +764,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 		/* If something went wrong, signal */
 		process_fpemu_return(sig, fault_addr);
 
-		return;
+		goto out;
 	} else if (fcr31 & FPU_CSR_INV_X)
 		info.si_code = FPE_FLTINV;
 	else if (fcr31 & FPU_CSR_DIV_X)
@@ -770,6 +781,9 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 	info.si_errno = 0;
 	info.si_addr = (void __user *) regs->cp0_epc;
 	force_sig_info(SIGFPE, &info, current);
+
+out:
+	exception_exit(prev_state);
 }
 
 static void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
@@ -835,9 +849,11 @@ static void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
 asmlinkage void do_bp(struct pt_regs *regs)
 {
 	unsigned int opcode, bcode;
+	enum ctx_state prev_state;
 	unsigned long epc;
 	u16 instr[2];
 
+	prev_state = exception_enter();
 	if (get_isa16_mode(regs->cp0_epc)) {
 		/* Calculate EPC. */
 		epc = exception_epc(regs);
@@ -852,7 +868,7 @@ asmlinkage void do_bp(struct pt_regs *regs)
 				goto out_sigsegv;
 		    bcode = (instr[0] >> 6) & 0x3f;
 		    do_trap_or_bp(regs, bcode, "Break");
-		    return;
+		    goto out;
 		}
 	} else {
 		if (__get_user(opcode, (unsigned int __user *) exception_epc(regs)))
@@ -876,12 +892,12 @@ asmlinkage void do_bp(struct pt_regs *regs)
 	switch (bcode) {
 	case BRK_KPROBE_BP:
 		if (notify_die(DIE_BREAK, "debug", regs, bcode, regs_to_trapnr(regs), SIGTRAP) == NOTIFY_STOP)
-			return;
+			goto out;
 		else
 			break;
 	case BRK_KPROBE_SSTEPBP:
 		if (notify_die(DIE_SSTEPBP, "single_step", regs, bcode, regs_to_trapnr(regs), SIGTRAP) == NOTIFY_STOP)
-			return;
+			goto out;
 		else
 			break;
 	default:
@@ -889,18 +905,24 @@ asmlinkage void do_bp(struct pt_regs *regs)
 	}
 
 	do_trap_or_bp(regs, bcode, "Break");
+
+out:
+	exception_exit(prev_state);
 	return;
 
 out_sigsegv:
 	force_sig(SIGSEGV, current);
+	goto out;
 }
 
 asmlinkage void do_tr(struct pt_regs *regs)
 {
 	u32 opcode, tcode = 0;
+	enum ctx_state prev_state;
 	u16 instr[2];
 	unsigned long epc = msk_isa16_mode(exception_epc(regs));
 
+	prev_state = exception_enter();
 	if (get_isa16_mode(regs->cp0_epc)) {
 		if (__get_user(instr[0], (u16 __user *)(epc + 0)) ||
 		    __get_user(instr[1], (u16 __user *)(epc + 2)))
@@ -918,10 +940,14 @@ asmlinkage void do_tr(struct pt_regs *regs)
 	}
 
 	do_trap_or_bp(regs, tcode, "Trap");
+
+out:
+	exception_exit(prev_state);
 	return;
 
 out_sigsegv:
 	force_sig(SIGSEGV, current);
+	goto out;
 }
 
 asmlinkage void do_ri(struct pt_regs *regs)
@@ -929,17 +955,19 @@ asmlinkage void do_ri(struct pt_regs *regs)
 	unsigned int __user *epc = (unsigned int __user *)exception_epc(regs);
 	unsigned long old_epc = regs->cp0_epc;
 	unsigned long old31 = regs->regs[31];
+	enum ctx_state prev_state;
 	unsigned int opcode = 0;
 	int status = -1;
 
+	prev_state = exception_enter();
 	if (notify_die(DIE_RI, "RI Fault", regs, 0, regs_to_trapnr(regs), SIGILL)
 	    == NOTIFY_STOP)
-		return;
+		goto out;
 
 	die_if_kernel("Reserved instruction in kernel code", regs);
 
 	if (unlikely(compute_return_epc(regs) < 0))
-		return;
+		goto out;
 
 	if (get_isa16_mode(regs->cp0_epc)) {
 		unsigned short mmop[2] = { 0 };
@@ -974,6 +1002,9 @@ asmlinkage void do_ri(struct pt_regs *regs)
 		regs->regs[31] = old31;
 		force_sig(status, current);
 	}
+
+out:
+	exception_exit(prev_state);
 }
 
 /*
@@ -1025,21 +1056,16 @@ static int default_cu2_call(struct notifier_block *nfb, unsigned long action,
 {
 	struct pt_regs *regs = data;
 
-	switch (action) {
-	default:
-		die_if_kernel("Unhandled kernel unaligned access or invalid "
+	die_if_kernel("COP2: Unhandled kernel unaligned access or invalid "
 			      "instruction", regs);
-		/* Fall through	 */
-
-	case CU2_EXCEPTION:
 	force_sig(SIGILL, current);
-	}
 
 	return NOTIFY_OK;
 }
 
 asmlinkage void do_cpu(struct pt_regs *regs)
 {
+	enum ctx_state prev_state;
 	unsigned int __user *epc;
 	unsigned long old_epc, old31;
 	unsigned int opcode;
@@ -1047,10 +1073,12 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 	int status;
 	unsigned long __maybe_unused flags;
 
-	die_if_kernel("do_cpu invoked from kernel context!", regs);
-
+	prev_state = exception_enter();
 	cpid = (regs->cp0_cause >> CAUSEB_CE) & 3;
 
+	if (cpid != 2)
+		die_if_kernel("do_cpu invoked from kernel context!", regs);
+
 	switch (cpid) {
 	case 0:
 		epc = (unsigned int __user *)exception_epc(regs);
@@ -1060,7 +1088,7 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 		status = -1;
 
 		if (unlikely(compute_return_epc(regs) < 0))
-			return;
+			goto out;
 
 		if (get_isa16_mode(regs->cp0_epc)) {
 			unsigned short mmop[2] = { 0 };
@@ -1093,7 +1121,7 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 			force_sig(status, current);
 		}
 
-		return;
+		goto out;
 
 	case 3:
 		/*
@@ -1131,19 +1159,26 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 				mt_ase_fp_affinity();
 		}
 
-		return;
+		goto out;
 
 	case 2:
 		raw_notifier_call_chain(&cu2_chain, CU2_EXCEPTION, regs);
-		return;
+		goto out;
 	}
 
 	force_sig(SIGILL, current);
+
+out:
+	exception_exit(prev_state);
 }
 
 asmlinkage void do_mdmx(struct pt_regs *regs)
 {
+	enum ctx_state prev_state;
+
+	prev_state = exception_enter();
 	force_sig(SIGILL, current);
+	exception_exit(prev_state);
 }
 
 /*
@@ -1151,8 +1186,10 @@ asmlinkage void do_mdmx(struct pt_regs *regs)
  */
 asmlinkage void do_watch(struct pt_regs *regs)
 {
+	enum ctx_state prev_state;
 	u32 cause;
 
+	prev_state = exception_enter();
 	/*
 	 * Clear WP (bit 22) bit of cause register so we don't loop
 	 * forever.
@@ -1174,13 +1211,16 @@ asmlinkage void do_watch(struct pt_regs *regs)
 		mips_clear_watch_registers();
 		local_irq_enable();
 	}
+	exception_exit(prev_state);
 }
 
 asmlinkage void do_mcheck(struct pt_regs *regs)
 {
 	const int field = 2 * sizeof(unsigned long);
 	int multi_match = regs->cp0_status & ST0_TS;
+	enum ctx_state prev_state;
 
+	prev_state = exception_enter();
 	show_regs(regs);
 
 	if (multi_match) {
@@ -1202,6 +1242,7 @@ asmlinkage void do_mcheck(struct pt_regs *regs)
 	panic("Caught Machine Check exception - %scaused by multiple "
 	      "matching entries in the TLB.",
 	      (multi_match) ? "" : "not ");
+	exception_exit(prev_state);
 }
 
 asmlinkage void do_mt(struct pt_regs *regs)
@@ -1627,7 +1668,6 @@ void *set_vi_handler(int n, vi_handler_t addr)
 }
 
 extern void tlb_init(void);
-extern void flush_tlb_handlers(void);
 
 /*
  * Timer interrupt
@@ -1837,6 +1877,15 @@ void __init trap_init(void)
 			ebase += (read_c0_ebase() & 0x3ffff000);
 	}
 
+	if (cpu_has_mmips) {
+		unsigned int config3 = read_c0_config3();
+
+		if (IS_ENABLED(CONFIG_CPU_MICROMIPS))
+			write_c0_config3(config3 | MIPS_CONF3_ISA_OE);
+		else
+			write_c0_config3(config3 & ~MIPS_CONF3_ISA_OE);
+	}
+
 	if (board_ebase_setup)
 		board_ebase_setup();
 	per_cpu_trap_init(true);
@@ -1956,7 +2005,6 @@ void __init trap_init(void)
 		set_handler(0x080, &except_vec3_generic, 0x80);
 
 	local_flush_icache_range(ebase, ebase + 0x400);
-	flush_tlb_handlers();
 
 	sort_extable(__start___dbe_table, __stop___dbe_table);
 

arch/mips/kernel/unaligned.c

@@ -72,6 +72,7 @@
  *	 A store crossing a page boundary might be executed only partially.
  *	 Undo the partial store in this case.
  */
+#include <linux/context_tracking.h>
 #include <linux/mm.h>
 #include <linux/signal.h>
 #include <linux/smp.h>
@@ -684,7 +685,8 @@ const int reg16to32[] = { 16, 17, 2, 3, 4, 5, 6, 7 };
 /* Recode table from 16-bit STORE register notation to 32-bit GPR. */
 const int reg16to32st[] = { 0, 17, 2, 3, 4, 5, 6, 7 };
 
-void emulate_load_store_microMIPS(struct pt_regs *regs, void __user * addr)
+static void emulate_load_store_microMIPS(struct pt_regs *regs,
+					 void __user *addr)
 {
 	unsigned long value;
 	unsigned int res;
@@ -1548,11 +1550,14 @@ static void emulate_load_store_MIPS16e(struct pt_regs *regs, void __user * addr)
 	    ("Unhandled kernel unaligned access or invalid instruction", regs);
 	force_sig(SIGILL, current);
 }
+
 asmlinkage void do_ade(struct pt_regs *regs)
 {
+	enum ctx_state prev_state;
 	unsigned int __user *pc;
 	mm_segment_t seg;
 
+	prev_state = exception_enter();
 	perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS,
 			1, regs, regs->cp0_badvaddr);
 	/*
@@ -1628,6 +1633,7 @@ asmlinkage void do_ade(struct pt_regs *regs)
 	/*
 	 * XXX On return from the signal handler we should advance the epc
 	 */
+	exception_exit(prev_state);
 }
 
 #ifdef CONFIG_DEBUG_FS

arch/mips/kernel/watch.c

@@ -111,6 +111,7 @@ __cpuinit void mips_probe_watch_registers(struct cpuinfo_mips *c)
 	 * disable the register.
 	 */
 	write_c0_watchlo0(7);
+	back_to_back_c0_hazard();
 	t = read_c0_watchlo0();
 	write_c0_watchlo0(0);
 	c->watch_reg_masks[0] = t & 7;
@@ -121,12 +122,14 @@ __cpuinit void mips_probe_watch_registers(struct cpuinfo_mips *c)
 	c->watch_reg_use_cnt = 1;
 	t = read_c0_watchhi0();
 	write_c0_watchhi0(t | 0xff8);
+	back_to_back_c0_hazard();
 	t = read_c0_watchhi0();
 	c->watch_reg_masks[0] |= (t & 0xff8);
 	if ((t & 0x80000000) == 0)
 		return;
 
 	write_c0_watchlo1(7);
+	back_to_back_c0_hazard();
 	t = read_c0_watchlo1();
 	write_c0_watchlo1(0);
 	c->watch_reg_masks[1] = t & 7;
@@ -135,12 +138,14 @@ __cpuinit void mips_probe_watch_registers(struct cpuinfo_mips *c)
 	c->watch_reg_use_cnt = 2;
 	t = read_c0_watchhi1();
 	write_c0_watchhi1(t | 0xff8);
+	back_to_back_c0_hazard();
 	t = read_c0_watchhi1();
 	c->watch_reg_masks[1] |= (t & 0xff8);
 	if ((t & 0x80000000) == 0)
 		return;
 
 	write_c0_watchlo2(7);
+	back_to_back_c0_hazard();
 	t = read_c0_watchlo2();
 	write_c0_watchlo2(0);
 	c->watch_reg_masks[2] = t & 7;
@@ -149,12 +154,14 @@ __cpuinit void mips_probe_watch_registers(struct cpuinfo_mips *c)
 	c->watch_reg_use_cnt = 3;
 	t = read_c0_watchhi2();
 	write_c0_watchhi2(t | 0xff8);
+	back_to_back_c0_hazard();
 	t = read_c0_watchhi2();
 	c->watch_reg_masks[2] |= (t & 0xff8);
 	if ((t & 0x80000000) == 0)
 		return;
 
 	write_c0_watchlo3(7);
+	back_to_back_c0_hazard();
 	t = read_c0_watchlo3();
 	write_c0_watchlo3(0);
 	c->watch_reg_masks[3] = t & 7;
@@ -163,6 +170,7 @@ __cpuinit void mips_probe_watch_registers(struct cpuinfo_mips *c)
 	c->watch_reg_use_cnt = 4;
 	t = read_c0_watchhi3();
 	write_c0_watchhi3(t | 0xff8);
+	back_to_back_c0_hazard();
 	t = read_c0_watchhi3();
 	c->watch_reg_masks[3] |= (t & 0xff8);
 	if ((t & 0x80000000) == 0)

arch/mips/lantiq/prom.c

@@ -112,7 +112,7 @@ int __init plat_of_setup(void)
 	if (!of_have_populated_dt())
 		panic("device tree not present");
 
-	strncpy(of_ids[0].compatible, soc_info.compatible,
+	strlcpy(of_ids[0].compatible, soc_info.compatible,
 		sizeof(of_ids[0].compatible));
 	strncpy(of_ids[1].compatible, "simple-bus",
 		sizeof(of_ids[1].compatible));