Merge flint.arm.linux.org.uk:/usr/src/linux-bk-2.5/linux-2.5

into flint.arm.linux.org.uk:/usr/src/linux-bk-2.5/linux-2.5-rmk

arch/arm/Kconfig

@@ -534,15 +534,63 @@ config CPU_FREQ
 	  written) to implement the policy. If you don't understand what this
 	  is all about, it's safe to say 'N'.
 
-config CPU_FREQ_24_API
+
+# CPUfreq on SA11x0 is special -- it _needs_ the userspace governor
+
+config CPU_FREQ_SA1100
+	bool
+	depends on CPU_FREQ && SA1100_LART
+	default y
+
+config CPU_FREQ_SA1110
+	bool
+	depends on CPU_FREQ && (SA1100_ASSABET || SA1100_CERF || SA1100_PT_SYSTEM3)
+	default y
+
+if (CPU_FREQ_SA1100 || CPU_FREQ_SA1110)
+
+config CPU_FREQ_GOV_USERSPACE
  	bool
  	depends on CPU_FREQ
  	default y
 
+config CPU_FREQ_24_API
+	bool
+	depends on CPU_FREQ_GOV_USERSPACE && SYSCTL
+	default y
+
 config CPU_FREQ_PROC_INTF
-	tristate
-	depends on CPU_FREQ
+	tristate "/proc/cpufreq interface (deprecated)"
+	depends on CPU_FREQ && PROC_FS
+	help
+	  This enables the /proc/cpufreq interface for controlling
+	  CPUFreq. Please note that it is recommended to use the sysfs
+	  interface instead (which is built automatically).
+
+	  For details, take a look at linux/Documentation/cpufreq.
+
+	  If in doubt, say N.
+
+endif
+
+# CPUfreq on Integrator can use the generic cpufreq core
+
+config CPU_FREQ_INTEGRATOR
+	tristate "CPUfreq driver for ARM Integrator CPUs"
+	depends on ARCH_INTEGRATOR && CPU_FREQ
 	default y
+	help
+	  This enables the CPUfreq driver for ARM Integrator CPUs.
+
+	  For details, take a look at linux/Documentation/cpufreq.
+
+	  If in doubt, say Y.
+
+if (CPU_FREQ_INTEGRATOR)
+
+source "drivers/cpufreq/Kconfig"
+
+endif
 
 source "drivers/pci/Kconfig"
 

arch/arm/common/sa1111.c

@@ -743,18 +743,11 @@ struct sa1111_save_data {
 static int sa1111_suspend(struct device *dev, u32 state, u32 level)
 {
 	struct sa1111 *sachip = dev_get_drvdata(dev);
+	struct sa1111_save_data *save;
 	unsigned long flags;
 	char *base;
 
-	/*
-	 * Save state.
-	 */
-	if (level == SUSPEND_SAVE_STATE ||
-	    level == SUSPEND_DISABLE ||
-	    level == SUSPEND_POWER_DOWN) {
-		struct sa1111_save_data *save;
-
-		if (!dev->saved_state)
+	if (!dev->saved_state && level == SUSPEND_NOTIFY)
 		dev->saved_state = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL);
 	if (!dev->saved_state)
 		return -ENOMEM;
@@ -762,6 +755,11 @@ static int sa1111_suspend(struct device *dev, u32 state, u32 level)
 	save = (struct sa1111_save_data *)dev->saved_state;
 
 	spin_lock_irqsave(&sachip->lock, flags);
+
+	/*
+	 * Save state.
+	 */
+	if (level == SUSPEND_SAVE_STATE) {
 		base = sachip->base;
 		save->skcr     = sa1111_readl(base + SA1111_SKCR);
 		save->skpcr    = sa1111_readl(base + SA1111_SKPCR);
@@ -779,25 +777,20 @@ static int sa1111_suspend(struct device *dev, u32 state, u32 level)
 		save->wakepol1 = sa1111_readl(base + SA1111_WAKEPOL1);
 		save->wakeen0  = sa1111_readl(base + SA1111_WAKEEN0);
 		save->wakeen1  = sa1111_readl(base + SA1111_WAKEEN1);
-		spin_unlock_irqrestore(&sachip->lock, flags);
 	}
 
 	/*
 	 * Disable.
 	 */
-	if (level == SUSPEND_DISABLE && state == 4) {
-		unsigned int val;
-
-		spin_lock_irqsave(&sachip->lock, flags);
-		base = sachip->base;
+	if (level == SUSPEND_POWER_DOWN && state == 4) {
+		unsigned int val = sa1111_readl(sachip->base + SA1111_SKCR);
 
-		sa1111_writel(0, base + SA1111_SKPWM0);
-		sa1111_writel(0, base + SA1111_SKPWM1);
-		val = sa1111_readl(base + SA1111_SKCR);
-		sa1111_writel(val | SKCR_SLEEP, base + SA1111_SKCR);
+		sa1111_writel(val | SKCR_SLEEP, sachip->base + SA1111_SKCR);
+		sa1111_writel(0, sachip->base + SA1111_SKPWM0);
+		sa1111_writel(0, sachip->base + SA1111_SKPWM1);
+	}
 
 	spin_unlock_irqrestore(&sachip->lock, flags);
-	}
 
 	return 0;
 }
@@ -819,17 +812,15 @@ static int sa1111_resume(struct device *dev, u32 level)
 	unsigned long flags, id;
 	char *base;
 
-	if (level != RESUME_RESTORE_STATE && level != RESUME_ENABLE)
-		return 0;
-
 	save = (struct sa1111_save_data *)dev->saved_state;
 	if (!save)
 		return 0;
 
-	dev->saved_state = NULL;
+	spin_lock_irqsave(&sachip->lock, flags);
 
 	/*
 	 * Ensure that the SA1111 is still here.
+	 * FIXME: shouldn't do this here.
 	 */
 	id = sa1111_readl(sachip->base + SA1111_SKID);
 	if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
@@ -839,9 +830,17 @@ static int sa1111_resume(struct device *dev, u32 level)
 		return 0;
 	}
 
-	spin_lock_irqsave(&sachip->lock, flags);
+	/*
+	 * First of all, wake up the chip.
+	 */
+	if (level == RESUME_POWER_ON) {
 		sa1111_wake(sachip);
 
+		sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN0);
+		sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN1);
+	}
+
+	if (level == RESUME_RESTORE_STATE) {
 		base = sachip->base;
 		sa1111_writel(save->skcr,     base + SA1111_SKCR);
 		sa1111_writel(save->skpcr,    base + SA1111_SKPCR);
@@ -859,9 +858,14 @@ static int sa1111_resume(struct device *dev, u32 level)
 		sa1111_writel(save->wakepol1, base + SA1111_WAKEPOL1);
 		sa1111_writel(save->wakeen0,  base + SA1111_WAKEEN0);
 		sa1111_writel(save->wakeen1,  base + SA1111_WAKEEN1);
+	}
+
 	spin_unlock_irqrestore(&sachip->lock, flags);
 
+	if (level == RESUME_ENABLE) {
+		dev->saved_state = NULL;
 		kfree(save);
+	}
 
 	return 0;
 }

arch/arm/kernel/Makefile

@@ -16,6 +16,7 @@ obj-n		:=
 obj-		:=
 
 obj-$(CONFIG_APM)		+= apm.o
+obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_ARCH_ACORN)	+= ecard.o time-acorn.o
 obj-$(CONFIG_ARCH_CLPS7500)	+= time-acorn.o
 obj-$(CONFIG_FOOTBRIDGE)	+= isa.o

arch/arm/kernel/bios32.c

@@ -18,7 +18,6 @@
 #include <asm/mach/pci.h>
 
 static int debug_pci;
-int have_isa_bridge;
 
 void pcibios_report_status(u_int status_mask, int warn)
 {
@@ -363,9 +362,8 @@ pbus_assign_bus_resources(struct pci_bus *bus, struct pci_sys_data *root)
 void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 {
 	struct pci_sys_data *root = bus->sysdata;
-	struct list_head *walk;
-	u16 features = PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
-	u16 all_status = -1;
+	struct pci_dev *dev;
+	u16 features = PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_FAST_BACK;
 
 	pbus_assign_bus_resources(bus, root);
 
@@ -373,42 +371,43 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 	 * Walk the devices on this bus, working out what we can
 	 * and can't support.
 	 */
-	for (walk = bus->devices.next; walk != &bus->devices; walk = walk->next) {
-		struct pci_dev *dev = pci_dev_b(walk);
+	list_for_each_entry(dev, &bus->devices, bus_list) {
 		u16 status;
 
 		pdev_fixup_device_resources(root, dev);
 
 		pci_read_config_word(dev, PCI_STATUS, &status);
-		all_status &= status;
+
+		/*
+		 * If any device on this bus does not support fast back
+		 * to back transfers, then the bus as a whole is not able
+		 * to support them.  Having fast back to back transfers
+		 * on saves us one PCI cycle per transaction.
+		 */
+		if (!(status & PCI_STATUS_FAST_BACK))
+			features &= ~PCI_COMMAND_FAST_BACK;
 
 		if (pdev_bad_for_parity(dev))
 			features &= ~(PCI_COMMAND_SERR | PCI_COMMAND_PARITY);
 
+		switch (dev->class >> 8) {
+#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
+		case PCI_CLASS_BRIDGE_ISA:
+		case PCI_CLASS_BRIDGE_EISA:
 			/*
-		 * If this device is an ISA bridge, set the have_isa_bridge
-		 * flag.  We will then go looking for things like keyboard,
-		 * etc
+			 * If this device is an ISA bridge, set isa_bridge
+			 * to point at this device.  We will then go looking
+			 * for things like keyboard, etc.
 			 */
-		if (dev->class >> 8 == PCI_CLASS_BRIDGE_ISA ||
-		    dev->class >> 8 == PCI_CLASS_BRIDGE_EISA)
-			have_isa_bridge = !0;
+			isa_bridge = dev;
+			break;
+#endif
 	}
 
-	/*
-	 * If any device on this bus does not support fast back to back
-	 * transfers, then the bus as a whole is not able to support them.
-	 * Having fast back to back transfers on saves us one PCI cycle
-	 * per transaction.
-	 */
-	if (all_status & PCI_STATUS_FAST_BACK)
-		features |= PCI_COMMAND_FAST_BACK;
-
 	/*
 	 * Now walk the devices again, this time setting them up.
 	 */
-	for (walk = bus->devices.next; walk != &bus->devices; walk = walk->next) {
-		struct pci_dev *dev = pci_dev_b(walk);
+	list_for_each_entry(dev, &bus->devices, bus_list) {
 		u16 cmd;
 
 		pci_read_config_word(dev, PCI_COMMAND, &cmd);
@@ -416,7 +415,17 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 		pci_write_config_word(dev, PCI_COMMAND, cmd);
 
 		pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
-				      SMP_CACHE_BYTES >> 2);
+				      L1_CACHE_BYTES >> 2);
+	}
+
+	/*
+	 * Propagate the flags to the PCI bridge.
+	 */
+	if (bus->self && bus->self->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+		if (features & PCI_COMMAND_FAST_BACK)
+			bus->bridge_ctl |= PCI_BRIDGE_CTL_FAST_BACK;
+		if (features & PCI_COMMAND_PARITY)
+			bus->bridge_ctl |= PCI_BRIDGE_CTL_PARITY;
 	}
 
 	/*
@@ -454,10 +463,8 @@ pcibios_fixup_pbus_ranges(struct pci_bus *bus, struct pbus_set_ranges_data *rang
  */
 u8 __devinit pci_std_swizzle(struct pci_dev *dev, u8 *pinp)
 {
-	int pin = *pinp;
+	int pin = *pinp - 1;
 
-	if (pin != 0) {
-		pin -= 1;
 	while (dev->bus->self) {
 		pin = (pin + PCI_SLOT(dev->devfn)) & 3;
 		/*
@@ -467,7 +474,6 @@ u8 __devinit pci_std_swizzle(struct pci_dev *dev, u8 *pinp)
 		dev = dev->bus->self;
 	}
 	*pinp = pin + 1;
-	}
 
 	return PCI_SLOT(dev->devfn);
 }

arch/arm/kernel/ecard.c

@@ -37,7 +37,6 @@
 #include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/proc_fs.h>
-#include <linux/notifier.h>
 #include <linux/device.h>
 #include <linux/init.h>
 
@@ -57,7 +56,7 @@
 
 enum req {
 	req_readbytes,
-	req_reset_all
+	req_reset
 };
 
 struct ecard_request {
@@ -131,14 +130,11 @@ slot_to_ecard(unsigned int slot)
 #define POD_INT_ADDR(x)	((volatile unsigned char *)\
 			 ((BUS_ADDR((x)) - IO_BASE) + IO_START))
 
-static inline void ecard_task_reset(void)
+static inline void ecard_task_reset(struct ecard_request *req)
 {
-	ecard_t *ec;
-
-	for (ec = cards; ec; ec = ec->next)
+	struct expansion_card *ec = req->ec;
 	if (ec->loader)
-			ecard_loader_reset(POD_INT_ADDR(ec->podaddr),
-					   ec->loader);
+		ecard_loader_reset(POD_INT_ADDR(ec->podaddr), ec->loader);
 }
 
 static void
@@ -218,8 +214,8 @@ static void ecard_do_request(struct ecard_request *req)
 		ecard_task_readbytes(req);
 		break;
 
-	case req_reset_all:
-		ecard_task_reset();
+	case req_reset:
+		ecard_task_reset(req);
 		break;
 	}
 }
@@ -355,60 +351,6 @@ ecard_call(struct ecard_request *req)
 
 /* ======================= Mid-level card control ===================== */
 
-/*
- * This function is responsible for resetting the expansion cards to a
- * sensible state immediately prior to rebooting the system.  This function
- * has process state (keventd), so we can sleep.
- *
- * Possible "val" values here:
- *  SYS_RESTART   -  restarting system
- *  SYS_HALT      - halting system
- *  SYS_POWER_OFF - powering down system
- *
- * We ignore all calls, unless it is a SYS_RESTART call - power down/halts
- * will be followed by a SYS_RESTART if ctrl-alt-del is pressed again.
- */
-static int ecard_reboot(struct notifier_block *me, unsigned long val, void *v)
-{
-	struct ecard_request req;
-
-	if (val != SYS_RESTART)
-		return 0;
-
-	/*
-	 * Disable the expansion card interrupt
-	 */
-	disable_irq(IRQ_EXPANSIONCARD);
-
-	/*
-	 * If we have any expansion card loader code which will handle
-	 * the reset for us, call it now.
-	 */
-	req.req = req_reset_all;
-	ecard_call(&req);
-
-	/*
-	 * Disable the expansion card interrupt again, just to be sure.
-	 */
-	disable_irq(IRQ_EXPANSIONCARD);
-
-	/*
-	 * Finally, reset the expansion card interrupt mask to
-	 * all enable (RISC OS doesn't set this)
-	 */
-#ifdef HAS_EXPMASK
-	have_expmask = ~0;
-	__raw_writeb(have_expmask, EXPMASK_ENABLE);
-#endif
-	return 0;
-}
-
-static struct notifier_block ecard_reboot_notifier = {
-	.notifier_call	= ecard_reboot,
-};
-
-
-
 static void
 ecard_readbytes(void *addr, ecard_t *ec, int off, int len, int useld)
 {
@@ -1083,11 +1025,6 @@ static int __init ecard_init(void)
 {
 	int slot, irqhw;
 
-	/*
-	 * Register our reboot notifier
-	 */
-	register_reboot_notifier(&ecard_reboot_notifier);
-
 #ifdef CONFIG_CPU_32
 	init_waitqueue_head(&ecard_wait);
 #endif
@@ -1158,11 +1095,32 @@ static int ecard_drv_remove(struct device *dev)
 	return 0;
 }
 
+/*
+ * Before rebooting, we must make sure that the expansion card is in a
+ * sensible state, so it can be re-detected.  This means that the first
+ * page of the ROM must be visible.  We call the expansion cards reset
+ * handler, if any.
+ */
+static void ecard_drv_shutdown(struct device *dev)
+{
+	struct expansion_card *ec = ECARD_DEV(dev);
+	struct ecard_driver *drv = ECARD_DRV(dev->driver);
+	struct ecard_request req;
+
+	if (drv->shutdown)
+		drv->shutdown(ec);
+	ecard_release(ec);
+	req.req = req_reset;
+	req.ec = ec;
+	ecard_call(&req);
+}
+
 int ecard_register_driver(struct ecard_driver *drv)
 {
 	drv->drv.bus = &ecard_bus_type;
 	drv->drv.probe = ecard_drv_probe;
 	drv->drv.remove = ecard_drv_remove;
+	drv->drv.shutdown = ecard_drv_shutdown;
 
 	return driver_register(&drv->drv);
 }

arch/arm/kernel/entry-armv.S

@@ -1028,8 +1028,10 @@ vector_IRQ:	@
 		@
 		@ now branch to the relevant MODE handling routine
 		@
-		mov	r13, #PSR_I_BIT | MODE_SVC
-		msr	spsr_c, r13			@ switch to SVC_32 mode
+		mrs	r13, cpsr
+		bic	r13, r13, #MODE_MASK
+		orr	r13, r13, #MODE_SVC
+		msr	spsr, r13			@ switch to SVC_32 mode
 
 		and	lr, lr, #15
 		ldr	lr, [pc, lr, lsl #2]

arch/arm/kernel/entry-common.S

@@ -75,9 +75,8 @@ no_work_pending:
  * This is how we return from a fork.
  */
 ENTRY(ret_from_fork)
-#ifdef CONFIG_PREEMPT
+	ldr	r0, [r0, #TI_TASK]
 	bl	schedule_tail
-#endif
 	get_thread_info tsk
 	ldr	r1, [tsk, #TI_FLAGS]		@ check for syscall tracing
 	mov	why, #1

arch/arm/kernel/pm.c

+/*
+ *  linux/arch/arm/kernel/suspend.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ *
+ *  This is the common support code for suspending an ARM machine.
+ *  pm_do_suspend() is responsible for actually putting the CPU to
+ *  sleep.
+ */
+#include <linux/config.h>
+#include <linux/pm.h>
+#include <linux/device.h>
+#include <linux/cpufreq.h>
+
+#include <asm/leds.h>
+#include <asm/system.h>
+
+int suspend(void)
+{
+	int ret;
+
+	/*
+	 * Suspend "legacy" devices.
+	 */
+	ret = pm_send_all(PM_SUSPEND, (void *)3);
+	if (ret != 0)
+		goto out;
+
+	/*
+	 * Tell LDM devices we're going to suspend.
+	 */
+	ret = device_suspend(4, SUSPEND_NOTIFY);
+	if (ret != 0)
+		goto resume_legacy;
+
+	/*
+	 * Disable, devices, and save state.
+	 */
+	device_suspend(4, SUSPEND_DISABLE);
+	device_suspend(4, SUSPEND_SAVE_STATE);
+
+	/*
+	 * Tell devices that they're going to be powered off.
+	 */
+	device_suspend(4, SUSPEND_POWER_DOWN);
+
+	local_irq_disable();
+	leds_event(led_stop);
+
+	ret = pm_do_suspend();
+
+	leds_event(led_start);
+	local_irq_enable();
+
+	/*
+	 * Tell devices that they now have power.
+	 */
+	device_resume(RESUME_POWER_ON);
+
+	/*
+	 * Restore the CPU frequency settings.
+	 */
+#ifdef CONFIG_CPU_FREQ
+	cpufreq_restore();
+#endif
+
+	/*
+	 * Resume LDM devices.
+	 */
+	device_resume(RESUME_RESTORE_STATE);
+	device_resume(RESUME_ENABLE);
+
+ resume_legacy:
+	/*
+	 * Resume "legacy" devices.
+	 */
+	pm_send_all(PM_RESUME, (void *)0);
+
+ out:
+	return ret;
+}
+
+#ifdef CONFIG_SYSCTL
+#include <linux/init.h>
+#include <linux/sysctl.h>
+
+/*
+ * This came from arch/arm/mach-sa1100/pm.c:
+ * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
+ *  with modifications by Nicolas Pitre and Russell King.
+ *
+ * ARGH!  ACPI people defined CTL_ACPI in linux/acpi.h rather than
+ * linux/sysctl.h.
+ *
+ * This means our interface here won't survive long - it needs a new
+ * interface.  Quick hack to get this working - use sysctl id 9999.
+ */
+#warning ACPI broke the kernel, this interface needs to be fixed up.
+#define CTL_ACPI 9999
+#define ACPI_S1_SLP_TYP 19
+
+static struct ctl_table pm_table[] =
+{
+	{ACPI_S1_SLP_TYP, "suspend", NULL, 0, 0600, NULL, (proc_handler *)&suspend},
+	{0}
+};
+
+static struct ctl_table pm_dir_table[] =
+{
+	{CTL_ACPI, "pm", NULL, 0, 0555, pm_table},
+	{0}
+};
+
+/*
+ * Initialize power interface
+ */
+static int __init pm_init(void)
+{
+	register_sysctl_table(pm_dir_table, 1);
+	return 0;
+}
+
+fs_initcall(pm_init);
+
+#endif

arch/arm/kernel/time.c

@@ -200,6 +200,7 @@ void do_settimeofday(struct timeval *tv)
 
 static struct irqaction timer_irq = {
 	.name	= "timer",
+	.flags	= SA_INTERRUPT,
 };
 
 /*

arch/arm/mach-integrator/Makefile

@@ -4,10 +4,11 @@
 
 # Object file lists.
 
-obj-y			:= arch.o cpu.o irq.o mm.o time.o
+obj-y			:= arch.o irq.o mm.o time.o
 obj-m			:=
 obj-n			:=
 obj-			:=
 
 obj-$(CONFIG_LEDS)	+= leds.o
 obj-$(CONFIG_PCI)	+= pci_v3.o pci.o
+obj-$(CONFIG_CPU_FREQ_INTEGRATOR)	+= cpu.o

arch/arm/mach-integrator/cpu.c

@@ -23,6 +23,8 @@
 #include <asm/hardware.h>
 #include <asm/io.h>
 
+static struct cpufreq_driver integrator_driver;
+
 #define CM_ID  	(IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_ID_OFFSET)
 #define CM_OSC	(IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_OSC_OFFSET)
 #define CM_STAT (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_STAT_OFFSET)
@@ -43,7 +45,6 @@ static unsigned int vco_to_freq(struct vco vco, int factor)
 	return 2000 * (vco.vdw + 8) / cc_divisor[vco.od] / factor;
 }
 
-#ifdef CONFIG_CPU_FREQ
 /*
  * Divisor indexes in ascending divisor order
  */
@@ -69,21 +70,17 @@ static struct vco freq_to_vco(unsigned int freq_khz, int factor)
 	return vco;
 }
 
+
 /*
- * Validate the speed in khz.  If it is outside our
- * range, then return the lowest.
+ * Validate the speed policy.
  */
-static int integrator_verify_speed(struct cpufreq_policy *policy)
+static int integrator_verify_policy(struct cpufreq_policy *policy)
 {
 	struct vco vco;
 
-	if (policy->max > policy->cpuinfo.max_freq)
-		policy->max = policy->cpuinfo.max_freq;
-
-	if (policy->max < 12000)
-		policy->max = 12000;
-	if (policy->max > 160000)
-		policy->max = 160000;
+	cpufreq_verify_within_limits(policy, 
+				     policy->cpuinfo.min_freq, 
+				     policy->cpuinfo.max_freq);
 
 	vco = freq_to_vco(policy->max, 1);
 
@@ -92,12 +89,28 @@ static int integrator_verify_speed(struct cpufreq_policy *policy)
 	if (vco.vdw > 152)
 		vco.vdw = 152;
 
-	policy->min = policy->max = vco_to_freq(vco, 1);
+	policy->max = vco_to_freq(vco, 1);
+
+	vco = freq_to_vco(policy->min, 1);
+
+	if (vco.vdw < 4)
+		vco.vdw = 4;
+	if (vco.vdw > 152)
+		vco.vdw = 152;
+
+	policy->min = vco_to_freq(vco, 1);
+
+	cpufreq_verify_within_limits(policy, 
+				     policy->cpuinfo.min_freq, 
+				     policy->cpuinfo.max_freq);
 
 	return 0;
 }
 
-static int integrator_set_policy(struct cpufreq_policy *policy)
+
+static int integrator_set_target(struct cpufreq_policy *policy,
+				 unsigned int target_freq,
+				 unsigned int relation)
 {
 	unsigned long cpus_allowed;
 	int cpu = policy->cpu;
@@ -121,9 +134,18 @@ static int integrator_set_policy(struct cpufreq_policy *policy)
 	cm_osc = __raw_readl(CM_OSC);
 	vco.od = (cm_osc >> 8) & 7;
 	vco.vdw = cm_osc & 255;
-
 	freqs.old = vco_to_freq(vco, 1);
-	freqs.new = target_freq;
+
+	/* freq_to_vco rounds down -- so we need the next larger freq in
+	 * case of CPUFREQ_RELATION_L.
+	 */
+	if (relation == CPUFREQ_RELATION_L)
+		target_freq += 1999;
+	if (target_freq > policy->max)
+		target_freq = policy->max;
+	vco = freq_to_vco(target_freq, 1);
+	freqs.new = vco_to_freq(vco, 1);
+
 	freqs.cpu = policy->cpu;
 
 	if (freqs.old == freqs.new) {
@@ -132,7 +154,6 @@ static int integrator_set_policy(struct cpufreq_policy *policy)
 	}
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-	vco = freq_to_vco(policy->max, 1);
 
 	cm_osc = __raw_readl(CM_OSC);
 	cm_osc &= 0xfffff800;
@@ -152,48 +173,19 @@ static int integrator_set_policy(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static struct cpufreq_policy integrator_policy = {
-	.cpu		= 0,
-	.policy		= CPUFREQ_POLICY_POWERSAVE,
-	.cpuinfo	= {
-		.max_freq		= 160000,
-		.min_freq		= 12000,
-		.transition_latency	= CPUFREQ_ETERNAL,
-	},
-};
-
-static struct cpufreq_driver integrator_driver = {
-	.verify		= integrator_verify_speed,
-	.setpolicy	= integrator_set_policy,
-	.policy		= &integrator_policy,
-	.name		= "integrator",
-};
-#endif
-
-static int __init integrator_cpu_init(void)
+static int integrator_cpufreq_init(struct cpufreq *policy)
 {
-	struct cpufreq_policy *policies;
-	unsigned long cpus_allowed;
-	int cpu;
-
-	policies = kmalloc(sizeof(struct cpufreq_policy) * NR_CPUS,
-			   GFP_KERNEL);
-	if (!policies) {
-		printk(KERN_ERR "CPU: unable to allocate policies structure\n");
-		return -ENOMEM;
-	}
-
-	cpus_allowed = current->cpus_allowed;
-	for (cpu = 0; cpu < NR_CPUS; cpu++) {
+	unsigned long cus_allowed;
+	unsigned int cpu = policy->cpu;
 	u_int cm_osc, cm_stat, mem_freq_khz;
 	struct vco vco;
 
-		if (!cpu_online(cpu))
-			continue;
+	cpus_allowed = current->cpus_allowed;
 
 	set_cpus_allowed(current, 1 << cpu);
 	BUG_ON(cpu != smp_processor_id());
 
+	/* detect memory etc. */
 	cm_stat = __raw_readl(CM_STAT);
 	cm_osc = __raw_readl(CM_OSC);
 	vco.od  = (cm_osc >> 20) & 7;
@@ -207,25 +199,38 @@ static int __init integrator_cpu_init(void)
 	vco.od = (cm_osc >> 8) & 7;
 	vco.vdw = cm_osc & 255;
 
-		policies[cpu].cpu = cpu;
-		policies[cpu].policy = CPUFREQ_POLICY_POWERSAVE,
-		policies[cpu].cpuinfo.max_freq = 160000;
-		policies[cpu].cpuinfo.min_freq = 12000;
-		policies[cpu].cpuinfo.transition_latency = CPUFREQ_ETERNAL;
-		policies[cpu].min =
-		policies[cpu].max = vco_to_freq(vco, 1);
-	}
+	/* set default policy and cpuinfo */
+	policy->policy = CPUFREQ_POLICY_PERFORMANCE;
+	policy->cpuinfo.max_freq = 160000;
+	policy->cpuinfo.min_freq = 12000;
+	policy->cpuinfo.transition_latency = 1000; /* 1 ms, assumed */
+	policy->cur = policy->min = policy->max = vco_to_freq(vco, 1); /* current freq */
 
 	set_cpus_allowed(current, cpus_allowed);
 
-#ifdef CONFIG_CPU_FREQ
-	integrator_driver.policy = policies;
-	cpufreq_register(&integrator_driver);
-#else
-	kfree(policies);
-#endif
-
 	return 0;
 }
 
-arch_initcall(integrator_cpu_init);
+static struct cpufreq_driver integrator_driver = {
+	.verify		= integrator_verify_policy,
+	.target		= integrator_set_target,
+	.init		= integrator_cpufreq_init,
+	.name		= "integrator",
+};
+
+static int __init integrator_cpu_init(void)
+{
+	return cpufreq_register_driver(&integrator_driver);
+}
+
+static void __exit integrator_cpu_exit(void)
+{
+	cpufreq_unregister_driver(&integrator_driver);
+}
+
+MODULE_AUTHOR ("Russell M. King");
+MODULE_DESCRIPTION ("cpufreq driver for ARM Integrator CPUs");
+MODULE_LICENSE ("GPL");
+
+module_init(integrator_cpu_init);
+module_exit(integrator_cpu_exit);

arch/arm/mach-sa1100/Makefile

@@ -9,15 +9,8 @@ obj-n :=
 obj-  :=
 led-y := leds.o
 
-# This needs to be cleaned up.  We probably need to have SA1100
-# and SA1110 config symbols.
-ifeq ($(CONFIG_CPU_FREQ),y)
-obj-$(CONFIG_SA1100_ASSABET)		+= cpu-sa1110.o
-obj-$(CONFIG_SA1100_CERF)		+= cpu-sa1110.o
-obj-$(CONFIG_SA1100_HACKKIT)		+= cpu-sa1110.o
-obj-$(CONFIG_SA1100_LART)		+= cpu-sa1100.o
-obj-$(CONFIG_SA1100_PT_SYSTEM3)		+= cpu-sa1110.o
-endif
+obj-$(CONFIG_CPU_FREQ_SA1100)		+= cpu-sa1100.o
+obj-$(CONFIG_CPU_FREQ_SA1110)		+= cpu-sa1110.o
 
 # Specific board support
 obj-$(CONFIG_SA1100_ADSBITSY)		+= adsbitsy.o

arch/arm/mach-sa1100/cpu-sa1100.c

@@ -101,7 +101,7 @@ typedef struct {
 } sa1100_dram_regs_t;
 
 
-
+static struct cpufreq_driver sa1100_driver;
 
 static sa1100_dram_regs_t sa1100_dram_settings[] =
 {
@@ -176,60 +176,73 @@ static void sa1100_update_dram_timings(int current_speed, int new_speed)
 	}
 }
 
-static int sa1100_setspeed(struct cpufreq_policy *policy)
+static int sa1100_target(struct cpufreq_policy *policy,
+			 unsigned int target_freq,
+			 unsigned int relation)
 {
 	unsigned int cur = sa11x0_getspeed();
+	unsigned int new_ppcr;
+
 	struct cpufreq_freqs freqs;
+	switch(relation){
+	case CPUFREQ_RELATION_L:
+		new_ppcr = sa11x0_freq_to_ppcr(target_freq);
+		if (sa11x0_ppcr_to_freq(new_ppcr) > policy->max)
+			new_ppcr--;
+		break;
+	case CPUFREQ_RELATION_H:
+		new_ppcr = sa11x0_freq_to_ppcr(target_freq);
+		if ((sa11x0_ppcr_to_freq(new_ppcr) > target_freq) &&
+		    (sa11x0_ppcr_to_freq(new_ppcr - 1) >= policy->min))
+			mew_ppcr--;
+		break;
+	}
 
 	freqs.old = cur;
-	freqs.new = policy->max;
+	freqs.new = sa11x0_ppcr_to_freq(new_ppcr);
 	freqs.cpu = 0;
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
-	if (policy->max > cur)
-		sa1100_update_dram_timings(cur, policy->max);
+	if (freqs.new > cur)
+		sa1100_update_dram_timings(cur, freqs.new);
 
-	PPCR = sa11x0_freq_to_ppcr(policy->max);
+	PPCR = new_ppcr;
 
-	if (policy->max < cur)
-		sa1100_update_dram_timings(cur, policy->max);
+	if (freqs.new < cur)
+		sa1100_update_dram_timings(cur, freqs.new);
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
 	return 0;
 }
 
-static struct cpufreq_policy sa1100_policy = {
-	.cpu		= 0,
-	.policy		= CPUFREQ_POLICY_POWERSAVE,
-	.cpuinfo	= {
-		.max_freq		= 287000,
-		.min_freq		= 59000,
-		.transition_latency	= CPUFREQ_ETERNAL,
-	},
-};
+static int __init sa1100_cpu_init(struct cpufreq_policy *policy)
+{
+	if (policy->cpu != 0)
+		return -EINVAL;
+	policy->cur = policy->min = policy->max = sa11x0_getspeed();
+	policy->policy = CPUFREQ_POLICY_POWERSAVE;
+	policy->cpuinfo.min_freq = 59000;
+	policy->cpuinfo.max_freq = 287000;
+	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	return 0;
+}
 
 static struct cpufreq_driver sa1100_driver = {
 	.verify		= sa11x0_verify_speed,
-	.setpolicy	= sa1100_setspeed,
-	.policy		= &sa1100_policy,
+	.target		= sa1100_target,
+	.init		= sa1100_cpu_init,
 	.name		= "sa1100",
 };
 
 static int __init sa1100_dram_init(void)
 {
-	int ret = -ENODEV;
-
-	if ((processor_id & CPU_SA1100_MASK) == CPU_SA1100_ID) {
-		sa1100_driver.cpu_cur_freq[0] =
-		sa1100_policy.min =
-		sa1100_policy.max = sa11x0_getspeed();
-
-		ret = cpufreq_register(&sa1100_driver);
-	}
-
-	return ret;
+	cpufreq_gov_userspace_init();
+ 	if ((processor_id & CPU_SA1100_MASK) == CPU_SA1100_ID)
+		return cpufreq_register_driver(&sa1100_driver);
+	else
+		return -ENODEV;
 }
 
 arch_initcall(sa1100_dram_init);

arch/arm/mach-sa1100/cpu-sa1110.c

@@ -32,6 +32,8 @@
 
 #undef DEBUG
 
+static struct cpufreq_driver sa1110_driver;
+
 struct sdram_params {
 	u_char  rows;		/* bits				 */
 	u_char  cas_latency;	/* cycles			 */
@@ -208,11 +210,11 @@ sdram_update_refresh(u_int cpu_khz, struct sdram_params *sdram)
 }
 
 /*
- * Ok, set the CPU frequency.  Since we've done the validation
- * above, we can match for an exact frequency.  If we don't find
- * an exact match, we will to set the lowest frequency to be safe.
+ * Ok, set the CPU frequency.  
  */
-static int sa1110_setspeed(struct cpufreq_policy *policy)
+static int sa1110_target(struct cpufreq_policy *policy,
+			 unsigned int target_freq,
+			 unsigned int relation)
 {
 	struct sdram_params *sdram = &sdram_params;
 	struct cpufreq_freqs freqs;
@@ -220,8 +222,25 @@ static int sa1110_setspeed(struct cpufreq_policy *policy)
 	unsigned long flags;
 	unsigned int ppcr, unused;
 
-	ppcr = sa11x0_freq_to_ppcr(policy->max);
-	sdram_calculate_timing(&sd, policy->max, sdram);
+	switch(relation){
+	case CPUFREQ_RELATION_L:
+		ppcr = sa11x0_freq_to_ppcr(target_freq);
+		if (sa11x0_ppcr_to_freq(ppcr) > policy->max)
+			ppcr--;
+		break;
+	case CPUFREQ_RELATION_H:
+		ppcr = sa11x0_freq_to_ppcr(target_freq);
+		if (ppcr && (sa11x0_ppcr_to_freq(ppcr) > target_freq) &&
+		    (sa11x0_ppcr_to_freq(ppcr-1) >= policy->min))
+			ppcr--;
+		break;
+	}
+
+	freqs.old = sa11x0_getspeed();
+	freqs.new = sa11x0_ppcr_to_freq(ppcr);
+	freqs.cpu = 0;
+
+	sdram_calculate_timing(&sd, freqs.new, sdram);
 
 #if 0
 	/*
@@ -240,10 +259,6 @@ static int sa1110_setspeed(struct cpufreq_policy *policy)
 	sd.mdcas[2] = 0xaaaaaaaa;
 #endif
 
-	freqs.old = sa11x0_getspeed();
-	freqs.new = policy->max;
-	freqs.cpu = 0;
-
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
 	/*
@@ -288,27 +303,29 @@ static int sa1110_setspeed(struct cpufreq_policy *policy)
 	/*
 	 * Now, return the SDRAM refresh back to normal.
 	 */
-	sdram_update_refresh(policy->max, sdram);
+	sdram_update_refresh(freqs.new, sdram);
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
 	return 0;
 }
 
-static struct cpufreq_policy sa1110_policy = {
-	.cpu		= 0,
-	.policy		= CPUFREQ_POLICY_POWERSAVE,
-	.cpuinfo	= {
-		.max_freq		= 287000,
-		.min_freq		= 59000,
-		.transition_latency	= CPUFREQ_ETERNAL,
-	},
-};
+static int __init sa1110_cpu_init(struct cpufreq_policy *policy)
+{
+	if (policy->cpu != 0)
+		return -EINVAL;
+	policy->cur = policy->min = policy->max = sa11x0_getspeed();
+	policy->policy = CPUFREQ_POLICY_POWERSAVE;
+	policy->cpuinfo.min_freq = 59000;
+	policy->cpuinfo.max_freq = 287000;
+	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	return 0;
+}
 
 static struct cpufreq_driver sa1110_driver = {
 	.verify		= sa11x0_verify_speed,
-	.setpolicy	 = sa1110_setspeed,
-	.policy		 = &sa1110_policy,
+	.target		= sa1110_target,
+	.init		= sa1110_cpu_init,
 	.name		= "sa1110",
 };
 
@@ -331,15 +348,11 @@ static int __init sa1110_clk_init(void)
 			sdram->tck, sdram->trcd, sdram->trp,
 			sdram->twr, sdram->refresh, sdram->cas_latency);
 
-		memcpy(&sdram_params, sdram, sizeof(sdram_params));
-
-		sa1110_driver.cpu_cur_freq[0] =
-		sa1110_policy.min =
-		sa1110_policy.max = sa11x0_getspeed();
+		cpufreq_gov_userspace_init();
  
-		sa1110_setspeed(&sa1110_policy);
+		memcpy(&sdram_params, sdram, sizeof(sdram_params));
 
-		return cpufreq_register(&sa1110_driver);
+		return cpufreq_register_driver(&sa1110_driver);
 	}
 
 	return 0;

arch/arm/mach-sa1100/generic.c

@@ -48,33 +48,48 @@ static const unsigned short cclk_frequency_100khz[NR_FREQS] = {
 	2802    /* 280.2 MHz */
 };
 
-#ifdef CONFIG_CPU_FREQ
+#if defined(CONFIG_CPU_FREQ_SA1100) || defined(CONFIG_CPU_FREQ_SA1110)
+/* rounds up(!)  */
 unsigned int sa11x0_freq_to_ppcr(unsigned int khz)
 {
 	int i;
 
 	khz /= 100;
 
-	for (i = NR_FREQS - 1; i > 0; i--)
-		if (cclk_frequency_100khz[i] <= khz)
+	for (i = 0; i < NR_FREQS; i++)
+		if (cclk_frequency_100khz[i] >= khz)
 			break;
 
 	return i;
 }
 
-/*
- * Validate the policy.  We aren't able to do any fancy in-kernel
- * scaling, so we force min=max, and set the policy to "performance".
- * If we can't generate the precise frequency requested, round it up.
+unsigned int sa11x0_ppcr_to_freq(unsigned int idx)
+{
+	unsigned int freq = 0;
+	if (idx < NR_FREQS)
+		freq = cclk_frequency_100khz[idx] * 100;
+	return freq;
+}
+
+
+/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on
+ * this platform, anyway.
  */
 int sa11x0_verify_speed(struct cpufreq_policy *policy)
 {
-	if (policy->max > policy->cpuinfo.max_freq)
-		policy->max = policy->cpuinfo.max_freq;
+	unsigned int tmp;
+	if (policy->cpu)
+		return -EINVAL;
+
+	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
+
+	/* make sure that at least one frequency is within the policy */
+	tmp = cclk_frequency_100khz[sa11x0_freq_to_ppcr(policy->min)] * 100;
+	if (tmp > policy->max)
+		policy->max = tmp;
+
+	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
 
-	policy->max = cclk_frequency_100khz[sa11x0_freq_to_ppcr(policy->max)] * 100;
-	policy->min = policy->max;
-	policy->policy = CPUFREQ_POLICY_POWERSAVE;
 	return 0;
 }
 

arch/arm/mach-sa1100/generic.h

@@ -23,3 +23,4 @@ struct cpufreq_policy;
 extern unsigned int sa11x0_freq_to_ppcr(unsigned int khz);
 extern int sa11x0_verify_speed(struct cpufreq_policy *policy);
 extern unsigned int sa11x0_getspeed(void);
+extern unsigned int sa11x0_ppcr_to_freq(unsigned int idx);

arch/arm/mach-sa1100/irq.c

@@ -211,6 +211,99 @@ static struct resource irq_resource = {
 	.end	= 0x9005ffff,
 };
 
+struct sa1100irq_state {
+	unsigned int	saved;
+	unsigned int	icmr;
+	unsigned int	iclr;
+	unsigned int	iccr;
+};
+
+static int sa1100irq_suspend(struct device *dev, u32 state, u32 level)
+{
+	struct sa1100irq_state *st;
+
+	if (!dev->saved_state && level == SUSPEND_NOTIFY)
+		dev->saved_state = kmalloc(sizeof(struct sa1100irq_state),
+					   GFP_KERNEL);
+	if (!dev->saved_state)
+		return -ENOMEM;
+
+	if (level == SUSPEND_POWER_DOWN) {
+		st = (struct sa1100irq_state *)dev->saved_state;
+
+		st->saved = 1;
+		st->icmr = ICMR;
+		st->iclr = ICLR;
+		st->iccr = ICCR;
+
+		/*
+		 * Disable all GPIO-based interrupts.
+		 */
+		ICMR &= ~(IC_GPIO11_27|IC_GPIO10|IC_GPIO9|IC_GPIO8|IC_GPIO7|
+			  IC_GPIO6|IC_GPIO5|IC_GPIO4|IC_GPIO3|IC_GPIO2|
+			  IC_GPIO1|IC_GPIO0);
+
+		/*
+		 * Set the appropriate edges for wakeup.
+		 */
+		GRER = PWER & GPIO_IRQ_rising_edge;
+		GFER = PWER & GPIO_IRQ_falling_edge;
+
+		/*
+		 * Clear any pending GPIO interrupts.
+		 */
+		GEDR = GEDR;
+	}
+	return 0;
+}
+
+static int sa1100irq_resume(struct device *dev, u32 level)
+{
+	struct sa1100irq_state *st;
+
+	if (level == RESUME_POWER_ON) {
+		st = (struct sa1100irq_state *)dev->saved_state;
+		dev->saved_state = NULL;
+
+		if (st->saved) {
+			ICCR = st->iccr;
+			ICLR = st->iclr;
+
+			GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
+			GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
+
+			ICMR = st->icmr;
+		}
+
+		kfree(st);
+	}
+	return 0;
+}
+
+static struct device_driver sa1100irq_driver = {
+	.name		= "sa11x0-irq",
+	.bus		= &system_bus_type,
+	.suspend	= sa1100irq_suspend,
+	.resume		= sa1100irq_resume,
+};
+
+static struct sys_device sa1100irq_device = {
+	.name		= "irq",
+	.id		= 0,
+	.dev = {
+		.name	= "Intel SA11x0 [Interrupt Controller]",
+		.driver	= &sa1100irq_driver,
+	},
+};
+
+static int __init sa1100irq_init_devicefs(void)
+{
+	driver_register(&sa1100irq_driver);
+	return sys_device_register(&sa1100irq_device);
+}
+
+device_initcall(sa1100irq_init_devicefs);
+
 void __init sa1100_init_irq(void)
 {
 	unsigned int irq;

arch/arm/mach-sa1100/pm.c

@@ -22,25 +22,12 @@
  * 2002-05-27:	Nicolas Pitre	Killed sleep.h and the kmalloced save array.
  * 				Storage is local on the stack now.
  */
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pm.h>
-#include <linux/sysctl.h>
 #include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/cpufreq.h>
+#include <linux/time.h>
 
 #include <asm/hardware.h>
 #include <asm/memory.h>
 #include <asm/system.h>
-#include <asm/leds.h>
-
-
-/*
- * Debug macros
- */
-#undef DEBUG
 
 extern void sa1100_cpu_suspend(void);
 extern void sa1100_cpu_resume(void);
@@ -58,10 +45,9 @@ enum {	SLEEP_SAVE_SP = 0,
 	SLEEP_SAVE_OSCR, SLEEP_SAVE_OIER,
 	SLEEP_SAVE_OSMR0, SLEEP_SAVE_OSMR1, SLEEP_SAVE_OSMR2, SLEEP_SAVE_OSMR3,
 
-	SLEEP_SAVE_GPDR, SLEEP_SAVE_GRER, SLEEP_SAVE_GFER, SLEEP_SAVE_GAFR,
+	SLEEP_SAVE_GPDR, SLEEP_SAVE_GAFR,
 	SLEEP_SAVE_PPDR, SLEEP_SAVE_PPSR, SLEEP_SAVE_PPAR, SLEEP_SAVE_PSDR,
 
-	SLEEP_SAVE_ICMR,
 	SLEEP_SAVE_Ser1SDCR0,
 
 	SLEEP_SAVE_SIZE
@@ -72,10 +58,6 @@ int pm_do_suspend(void)
 {
 	unsigned long sleep_save[SLEEP_SAVE_SIZE];
 
-	local_irq_disable();
-
-	leds_event(led_stop);
-
 	/* preserve current time */
 	RCNR = xtime.tv_sec;
 
@@ -88,8 +70,6 @@ int pm_do_suspend(void)
 	SAVE(OIER);
 
 	SAVE(GPDR);
-	SAVE(GRER);
-	SAVE(GFER);
 	SAVE(GAFR);
 
 	SAVE(PPDR);
@@ -99,13 +79,6 @@ int pm_do_suspend(void)
 
 	SAVE(Ser1SDCR0);
 
-	SAVE(ICMR);
-
-	/* ... maybe a global variable initialized by arch code to set this? */
-	GRER = PWER;
-	GFER = 0;
-	GEDR = GEDR;
-
 	/* Clear previous reset status */
 	RCSR = RCSR_HWR | RCSR_SWR | RCSR_WDR | RCSR_SMR;
 
@@ -115,22 +88,23 @@ int pm_do_suspend(void)
 	/* go zzz */
 	sa1100_cpu_suspend();
 
-	/* ensure not to come back here if it wasn't intended */
+	/*
+	 * Ensure not to come back here if it wasn't intended
+	 */
 	PSPR = 0;
 
-#ifdef DEBUG
-	printk(KERN_DEBUG "*** made it back from resume\n");
-#endif
+	/*
+	 * Ensure interrupt sources are disabled; we will re-init
+	 * the interrupt subsystem via the device manager.
+	 */
+	ICLR = 0;
+	ICCR = 1;
+	ICMR = 0;
 
 	/* restore registers */
 	RESTORE(GPDR);
-	RESTORE(GRER);
-	RESTORE(GFER);
 	RESTORE(GAFR);
 
-	/* clear any edge detect bit */
-	GEDR = GEDR;
-
 	RESTORE(PPDR);
 	RESTORE(PPSR);
 	RESTORE(PPAR);
@@ -138,6 +112,9 @@ int pm_do_suspend(void)
 
 	RESTORE(Ser1SDCR0);
 
+	/*
+	 * Clear the peripheral sleep-hold bit.
+	 */
 	PSSR = PSSR_PH;
 
 	RESTORE(OSMR0);
@@ -147,24 +124,9 @@ int pm_do_suspend(void)
 	RESTORE(OSCR);
 	RESTORE(OIER);
 
-	ICLR = 0;
-	ICCR = 1;
-	RESTORE(ICMR);
-
 	/* restore current time */
 	xtime.tv_sec = RCNR;
 
-	leds_event(led_start);
-
-	local_irq_enable();
-
-	/*
-	 * Restore the CPU frequency settings.
-	 */
-#ifdef CONFIG_CPU_FREQ
-	cpufreq_restore();
-#endif
-
 	return 0;
 }
 
@@ -172,78 +134,3 @@ unsigned long sleep_phys_sp(void *sp)
 {
 	return virt_to_phys(sp);
 }
-
-#ifdef CONFIG_SYSCTL
-/*
- * ARGH!  ACPI people defined CTL_ACPI in linux/acpi.h rather than
- * linux/sysctl.h.
- *
- * This means our interface here won't survive long - it needs a new
- * interface.  Quick hack to get this working - use sysctl id 9999.
- */
-#warning ACPI broke the kernel, this interface needs to be fixed up.
-#define CTL_ACPI 9999
-#define ACPI_S1_SLP_TYP 19
-
-/*
- * Send us to sleep.
- */
-static int sysctl_pm_do_suspend(void)
-{
-	int retval;
-
-	/*
-	 * Suspend "legacy" devices.
-	 */
-	retval = pm_send_all(PM_SUSPEND, (void *)3);
-	if (retval == 0) {
-		/*
-		 * Suspend LDM devices.
-		 */
-		device_suspend(4, SUSPEND_NOTIFY);
-		device_suspend(4, SUSPEND_SAVE_STATE);
-		device_suspend(4, SUSPEND_DISABLE);
-
-		retval = pm_do_suspend();
-
-		/*
-		 * Resume LDM devices.
-		 */
-		device_resume(RESUME_RESTORE_STATE);
-		device_resume(RESUME_ENABLE);
-
-		/*
-		 * Resume "legacy" devices.
-		 */
-		pm_send_all(PM_RESUME, (void *)0);
-	}
-
-	return retval;
-}
-
-static struct ctl_table pm_table[] =
-{
-	{ACPI_S1_SLP_TYP, "suspend", NULL, 0, 0600, NULL, (proc_handler *)&sysctl_pm_do_suspend},
-	{0}
-};
-
-static struct ctl_table pm_dir_table[] =
-{
-	{CTL_ACPI, "pm", NULL, 0, 0555, pm_table},
-	{0}
-};
-
-/*
- * Initialize power interface
- */
-static int __init pm_init(void)
-{
-	register_sysctl_table(pm_dir_table, 1);
-	return 0;
-}
-
-fs_initcall(pm_init);
-
-#endif
-
-EXPORT_SYMBOL(pm_do_suspend);

arch/arm/mach-sa1100/system3.c

@@ -213,11 +213,17 @@ static void __init system3_init_irq(void)
 static int sdram_notifier(struct notifier_block *nb, unsigned long event,
 		void *data)
 {
+	struct cpufreq_policy *policy = data;
 	switch (event) {
-		case CPUFREQ_MINMAX:
-			cpufreq_updateminmax(data, 147500, 206000);
+		case CPUFREQ_ADJUST:
+		case CPUFREQ_INCOMPATIBLE:
+			cpufreq_verify_within_limits(policy, 147500, 206000);
+			break;
+		case CPUFREQ_NOTIFY:
+			if ((policy->min < 147500) || 
+			    (policy->max > 206000))
+				panic("cpufreq failed to limit the speed\n");
 			break;
-
 	}
 	return 0;
 }
@@ -405,7 +411,7 @@ static int __init system3_init(void)
 		goto DONE;
 	}
 
-#if defined( CONFIG_CPU_FREQ )
+#ifdef CONFIG_CPU_FREQ
 	ret = cpufreq_register_notifier(&system3_clkchg_block);
 	if ( ret != 0 ) {
 		printk( KERN_WARNING"PT Digital Board: could not register clock scale callback\n" );

arch/arm/tools/mach-types

@@ -6,7 +6,7 @@
 # To add an entry into this database, please see Documentation/arm/README,
 # or contact rmk@arm.linux.org.uk
 #
-# Last update: Mon Jan 13 22:55:16 2003
+# Last update: Wed Mar 5 22:11:59 2003
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -228,7 +228,7 @@ csb226			ARCH_CSB226		CSB226			216
 arnold			SA1100_ARNOLD		ARNOLD			217
 psiboard		SA1100_PSIBOARD		PSIBOARD		218
 jz8028			ARCH_JZ8028		JZ8028			219
-ipaq3			ARCH_IPAQ3		IPAQ3			220
+h5400			ARCH_IPAQ3		IPAQ3			220
 forte			SA1100_FORTE		FORTE			221
 acam			SA1100_ACAM		ACAM			222
 abox			SA1100_ABOX		ABOX			223
@@ -259,7 +259,7 @@ stork_nest		ARCH_STORK_NEST		STORK_NEST		247
 stork_egg		ARCH_STORK_EGG		STORK_EGG		248
 wismo			SA1100_WISMO		WISMO			249
 ezlinx			ARCH_EZLINX		EZLINX			250
-at91rm9200		ARCH_AT91		AT91			251
+at91			ARCH_AT91		AT91			251
 orion			ARCH_ORION		ORION			252
 neptune			ARCH_NEPTUNE		NEPTUNE			253
 hackkit			SA1100_HACKKIT		HACKKIT			254
@@ -281,3 +281,27 @@ stlc1502		ARCH_STLC1502		STLC1502		269
 siren			ARCH_SIREN		SIREN			270
 greenlake		ARCH_GREENLAKE		GREENLAKE		271
 argus			ARCH_ARGUS		ARGUS			272
+combadge		SA1100_COMBADGE		COMBADGE		273
+rokepxa			ARCH_ROKEPXA		ROKEPXA			274
+cintegrator		ARCH_CINTEGRATOR	CINTEGRATOR		275
+guidea07		ARCH_GUIDEA07		GUIDEA07		276
+tat257			ARCH_TAT257		TAT257			277
+igp2425			ARCH_IGP2425		IGP2425			278
+bluegrama		ARCH_BLUEGRAMMA		BLUEGRAMMA		279
+ipod			ARCH_IPOD		IPOD			280
+adsbitsyx		ARCH_ADSBITSYX		ADSBITSYX		281
+trizeps2		ARCH_TRIZEPS2		TRIZEPS2		282
+viper			ARCH_VIPER		VIPER			283
+adsbitsyplus		SA1100_ADSBITSYPLUS	ADSBITSYPLUS		284
+adsagc			SA1100_ADSAGC		ADSAGC			285
+stp7312			ARCH_STP7312		STP7312			286
+nx_phnx			ARCH_PXA255		PXA255			287
+wep_ep250		ARCH_WEP_EP250		WEP_EP250		288
+inhandelf3		ARCH_INHANDELF3		INHANDELF3		289
+adi_coyote		ARCH_ADI_COYOTE		ADI_COYOTE		290
+iyonix			ARCH_IYONIX		IYONIX			291
+damicam_sa1110		ARCH_DAMICAM_SA1110	DAMICAM_SA1110		292
+meg03			ARCH_MEG03		MEG03			293
+pxa_whitechapel		ARCH_PXA_WHITECHAPEL	PXA_WHITECHAPEL		294
+nwsc			ARCH_NWSC		NWSC			295
+nwlarm			ARCH_NWLARM		NWLARM			296

drivers/acorn/net/ether1.c

@@ -973,23 +973,6 @@ ether1_getstats (struct net_device *dev)
 	return &priv->stats;
 }
 
-static int
-ether1_set_mac_address(struct net_device *dev, void *p)
-{
-	struct sockaddr *addr = p;
-
-	if (netif_running(dev))
-		return -EBUSY;
-
-	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-
-	/*
-	 * We'll set the MAC address on the chip when we open it.
-	 */
-
-	return 0;
-}
-
 /*
  * Set or clear the multicast filter for this adaptor.
  * num_addrs == -1	Promiscuous mode, receive all packets.
@@ -1062,7 +1045,6 @@ ether1_probe(struct expansion_card *ec, const struct ecard_id *id)
 	dev->hard_start_xmit    = ether1_sendpacket;
 	dev->get_stats		= ether1_getstats;
 	dev->set_multicast_list = ether1_setmulticastlist;
-	dev->set_mac_address	= ether1_set_mac_address;
 	dev->tx_timeout		= ether1_timeout;
 	dev->watchdog_timeo	= 5 * HZ / 100;
 

drivers/acorn/net/ether3.c

@@ -461,23 +461,6 @@ static struct net_device_stats *ether3_getstats(struct net_device *dev)
 	return &priv->stats;
 }
 
-static int
-ether3_set_mac_address(struct net_device *dev, void *p)
-{
-	struct sockaddr *addr = p;
-
-	if (netif_running(dev))
-		return -EBUSY;
-
-	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-
-	/*
-	 * We'll set the MAC address on the chip when we open it.
-	 */
-
-	return 0;
-}
-
 /*
  * Set or clear promiscuous/multicast mode filter for this adaptor.
  *
@@ -903,7 +886,6 @@ ether3_probe(struct expansion_card *ec, const struct ecard_id *id)
 	dev->hard_start_xmit	= ether3_sendpacket;
 	dev->get_stats		= ether3_getstats;
 	dev->set_multicast_list	= ether3_setmulticastlist;
-	dev->set_mac_address	= ether3_set_mac_address;
 	dev->tx_timeout		= ether3_timeout;
 	dev->watchdog_timeo	= 5 * HZ / 100;
 

drivers/acorn/net/etherh.c

@@ -482,23 +482,6 @@ etherh_close(struct net_device *dev)
 	return 0;
 }
 
-static int
-etherh_set_mac_address(struct net_device *dev, void *p)
-{
-	struct sockaddr *addr = p;
-
-	if (netif_running(dev))
-		return -EBUSY;
-
-	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-
-	/*
-	 * We'll set the MAC address on the chip when we open it.
-	 */
-
-	return 0;
-}
-
 /*
  * Initialisation
  */
@@ -585,7 +568,6 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
 
 	dev->open		= etherh_open;
 	dev->stop		= etherh_close;
-	dev->set_mac_address	= etherh_set_mac_address;
 	dev->set_config		= etherh_set_config;
 	dev->irq		= ec->irq;
 	dev->base_addr		= ecard_address(ec, ECARD_MEMC, 0);

drivers/pcmcia/sa1100_generic.c

@@ -47,7 +47,6 @@
 #include <linux/notifier.h>
 #include <linux/proc_fs.h>
 #include <linux/version.h>
-#include <linux/cpufreq.h>
 
 #include <pcmcia/version.h>
 #include <pcmcia/cs_types.h>

drivers/video/sa1100fb.c

@@ -1590,11 +1590,21 @@ sa1100fb_freq_policy(struct notifier_block *nb, unsigned long val,
 	struct sa1100fb_info *fbi = TO_INF(nb, freq_policy);
 	struct cpufreq_policy *policy = data;
 
-	if (val == CPUFREQ_INCOMPATIBLE) {
+	switch (val) {
+	case CPUFREQ_ADJUST:
+	case CPUFREQ_INCOMPATIBLE:
 		printk(KERN_DEBUG "min dma period: %d ps, "
 			"new clock %d kHz\n", sa1100fb_min_dma_period(fbi),
 			policy->max);
 		/* todo: fill in min/max values */
+		break;
+	case CPUFREQ_NOTIFY:
+		do {} while(0);
+		/* todo: panic if min/max values aren't fulfilled 
+		 * [can't really happen unless there's a bug in the
+		 * CPU policy verififcation process *
+		 */
+		break;
 	}
 	return 0;
 }

include/asm-arm/arch-anakin/time.h

@@ -23,7 +23,6 @@ anakin_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 void __init time_init(void)
 {
 	timer_irq.handler = anakin_timer_interrupt;
-	timer_irq.flags = SA_INTERRUPT;
 	setup_irq(IRQ_TICK, &timer_irq);
 }
 

include/asm-arm/arch-sa1100/time.h

@@ -75,15 +75,12 @@ static unsigned long sa1100_gettimeoffset (void)
 static void sa1100_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
 	unsigned int next_match;
-	unsigned long flags;
 
 	do {
 		do_leds();
-		local_irq_save(flags);
 		do_timer(regs);
 		OSSR = OSSR_M0;  /* Clear match on timer 0 */
 		next_match = (OSMR0 += LATCH);
-		local_irq_restore(flags);
 		do_set_rtc();
 	} while ((signed long)(next_match - OSCR) <= 0);
 

include/asm-arm/arch-shark/time.h

@@ -34,6 +34,5 @@ void __init time_init(void)
 	xtime.tv_sec = 0;
 
 	timer_irq.handler = timer_interrupt;
-	timer_irq.flags = SA_INTERRUPT; /* FIXME: really? */
 	setup_irq(IRQ_TIMER, &timer_irq);
 }

include/asm-arm/ecard.h

@@ -267,6 +267,7 @@ extern struct bus_type ecard_bus_type;
 struct ecard_driver {
 	int			(*probe)(struct expansion_card *, const struct ecard_id *id);
 	void			(*remove)(struct expansion_card *);
+	void			(*shutdown)(struct expansion_card *);
 	const struct ecard_id	*id_table;
 	unsigned int		id;
 	struct device_driver	drv;

include/asm-arm/ide.h

@@ -26,16 +26,10 @@
 #define ide_default_io_base(i)		((ide_ioreg_t)0)
 #define ide_default_irq(b)		(0)
 
-#define ide_request_irq(irq,hand,flg,dev,id)	request_irq((irq),(hand),(flg),(dev),(id))
-#define ide_free_irq(irq,dev_id)		free_irq((irq), (dev_id))
-#define ide_check_region(from,extent)		check_region((from), (extent))
-#define ide_request_region(from,extent,name)	request_region((from), (extent), (name))
-#define ide_release_region(from,extent)		release_region((from), (extent))
-
-/*
- * The following are not needed for the non-m68k ports
- */
-#define ide_ack_intr(hwif)		(1)
+#define __ide_mm_insw(port,addr,len)	readsw(port,addr,len)
+#define __ide_mm_insl(port,addr,len)	readsl(port,addr,len)
+#define __ide_mm_outsw(port,addr,len)	writesw(port,addr,len)
+#define __ide_mm_outsl(port,addr,len)	writesl(port,addr,len)
 
 #endif /* __KERNEL__ */
 

include/asm-arm/pci.h

@@ -131,7 +131,10 @@ static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
 /*
  * Return the index of the PCI controller for device PDEV.
  */
-#define pci_controller_num(PDEV)	(0)
+static inline int pci_controller_num(struct pci_dev *dev)
+{
+	return 0;
+}
 
 
 #if defined(CONFIG_SA1111) && !defined(CONFIG_PCI)

include/asm-arm/pgtable.h

@@ -110,6 +110,7 @@ extern struct page *empty_zero_page;
 #define pgd_bad(pgd)		(0)
 #define pgd_present(pgd)	(1)
 #define pgd_clear(pgdp)		do { } while (0)
+#define set_pgd(pgd,pgdp)	do { } while (0)
 
 #define page_pte_prot(page,prot)	mk_pte(page, prot)
 #define page_pte(page)		mk_pte(page, __pgprot(0))

include/asm-arm/posix_types.h

@@ -34,6 +34,8 @@ typedef int			__kernel_ptrdiff_t;
 typedef long			__kernel_time_t;
 typedef long			__kernel_suseconds_t;
 typedef long			__kernel_clock_t;
+typedef int			__kernel_timer_t;
+typedef int			__kernel_clockid_t;
 typedef int			__kernel_daddr_t;
 typedef char *			__kernel_caddr_t;
 typedef unsigned short		__kernel_uid16_t;

include/asm-arm/proc-armv/tlbflush.h

 /*
  *  linux/include/asm-arm/proc-armv/tlbflush.h
  *
- *  Copyright (C) 1999-2002 Russell King
+ *  Copyright (C) 1999-2003 Russell King
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -38,21 +38,31 @@
 #define v3_tlb_flags	(TLB_V3_FULL | TLB_V3_PAGE)
 
 #if defined(CONFIG_CPU_ARM610) || defined(CONFIG_CPU_ARM710)
+# define v3_possible_flags	v3_tlb_flags
+# define v3_always_flags	v3_tlb_flags
 # ifdef _TLB
 #  define MULTI_TLB 1
 # else
 #  define _TLB v3
 # endif
+#else
+# define v3_possible_flags	0
+# define v3_always_flags	(-1UL)
 #endif
 
 #define v4_tlb_flags	(TLB_V4_U_FULL | TLB_V4_U_PAGE)
 
 #if defined(CONFIG_CPU_ARM720T)
+# define v4_possible_flags	v4_tlb_flags
+# define v4_always_flags	v4_tlb_flags
 # ifdef _TLB
 #  define MULTI_TLB 1
 # else
 #  define _TLB v4
 # endif
+#else
+# define v4_possible_flags	0
+# define v4_always_flags	(-1UL)
 #endif
 
 #define v4wbi_tlb_flags	(TLB_WB | \
@@ -62,11 +72,16 @@
 #if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
     defined(CONFIG_CPU_ARM926T) || defined(CONFIG_CPU_ARM1020) || \
     defined(CONFIG_CPU_XSCALE)
+# define v4wbi_possible_flags	v4wbi_tlb_flags
+# define v4wbi_always_flags	v4wbi_tlb_flags
 # ifdef _TLB
 #  define MULTI_TLB 1
 # else
 #  define _TLB v4wbi
 # endif
+#else
+# define v4wbi_possible_flags	0
+# define v4wbi_always_flags	(-1UL)
 #endif
 
 #define v4wb_tlb_flags	(TLB_WB | \
@@ -74,11 +89,16 @@
 			 TLB_V4_D_PAGE)
 
 #if defined(CONFIG_CPU_SA110) || defined(CONFIG_CPU_SA1100)
+# define v4wb_possible_flags	v4wb_tlb_flags
+# define v4wb_always_flags	v4wb_tlb_flags
 # ifdef _TLB
 #  define MULTI_TLB 1
 # else
 #  define _TLB v4wb
 # endif
+#else
+# define v4wb_possible_flags	0
+# define v4wb_always_flags	(-1UL)
 #endif
 
 #ifndef _TLB
@@ -98,23 +118,23 @@ struct cpu_tlb_fns {
  */
 #ifdef MULTI_TLB
 
-extern struct cpu_tlb_fns cpu_tlb;
-
 #define __cpu_flush_user_tlb_range	cpu_tlb.flush_user_range
 #define __cpu_flush_kern_tlb_range	cpu_tlb.flush_kern_range
-#define __cpu_tlb_flags			cpu_tlb.tlb_flags
 
 #else
 
 #define __cpu_flush_user_tlb_range	__glue(_TLB,_flush_user_tlb_range)
 #define __cpu_flush_kern_tlb_range	__glue(_TLB,_flush_kern_tlb_range)
-#define __cpu_tlb_flags			__glue(_TLB,_tlb_flags)
 
 extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *);
 extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long);
 
 #endif
 
+extern struct cpu_tlb_fns cpu_tlb;
+
+#define __cpu_tlb_flags			cpu_tlb.tlb_flags
+
 /*
  *	TLB Management
  *	==============
@@ -158,11 +178,34 @@ extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long);
  *		- kaddr - Kernel virtual memory address
  */
 
-#define tlb_flag(f)	(__cpu_tlb_flags & (f))
+/*
+ * We optimise the code below by:
+ *  - building a set of TLB flags that might be set in __cpu_tlb_flags
+ *  - building a set of TLB flags that will always be set in __cpu_tlb_flags
+ *  - if we're going to need __cpu_tlb_flags, access it once and only once
+ *
+ * This allows us to build optimal assembly for the single-CPU type case,
+ * and as close to optimal given the compiler constrants for multi-CPU
+ * case.  We could do better for the multi-CPU case if the compiler
+ * implemented the "%?" method, but this has been discontinued due to too
+ * many people getting it wrong.
+ */
+#define possible_tlb_flags	(v3_possible_flags | \
+				 v4_possible_flags | \
+				 v4wbi_possible_flags | \
+				 v4wb_possible_flags)
+
+#define always_tlb_flags	(v3_always_flags & \
+				 v4_always_flags & \
+				 v4wbi_always_flags & \
+				 v4wb_always_flags)
+
+#define tlb_flag(f)	((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f)))
 
 static inline void flush_tlb_all(void)
 {
 	const int zero = 0;
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
 
 	if (tlb_flag(TLB_WB))
 		asm("mcr%? p15, 0, %0, c7, c10, 4" : : "r" (zero));
@@ -180,6 +223,7 @@ static inline void flush_tlb_all(void)
 static inline void flush_tlb_mm(struct mm_struct *mm)
 {
 	const int zero = 0;
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
 
 	if (tlb_flag(TLB_WB))
 		asm("mcr%? p15, 0, %0, c7, c10, 4" : : "r" (zero));
@@ -200,6 +244,7 @@ static inline void
 flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 {
 	const int zero = 0;
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
 
 	uaddr &= PAGE_MASK;
 
@@ -223,6 +268,7 @@ flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 static inline void flush_tlb_kernel_page(unsigned long kaddr)
 {
 	const int zero = 0;
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
 
 	kaddr &= PAGE_MASK;
 
@@ -241,6 +287,10 @@ static inline void flush_tlb_kernel_page(unsigned long kaddr)
 		asm("mcr%? p15, 0, %0, c8, c5, 0" : : "r" (zero));
 }
 
+#undef tlb_flag
+#undef always_tlb_flags
+#undef possible_tlb_flags
+
 /*
  * Convert calls to our calling convention.
  */

include/asm-arm/proc-fns.h

@@ -122,15 +122,4 @@
 #include CPU_INCLUDE_NAME
 
 #endif /* __KERNEL__ */
-
-#if 0
- * The following is to fool mkdep into generating the correct
- * dependencies.  Without this, it can't figure out that this
- * file does indeed depend on the cpu-*.h files.
-#include <asm/cpu-single.h>
-#include <asm/cpu-multi26.h>
-#include <asm/cpu-multi32.h>
- *
-#endif
-
 #endif /* __ASM_PROCFNS_H */

include/asm-arm/system.h

@@ -14,16 +14,6 @@ extern unsigned int system_serial_low;
 extern unsigned int system_serial_high;
 extern unsigned int mem_fclk_21285;
 
-/*
- * This tells us if we have an ISA bridge
- * present in a PCI system.
- */
-#ifdef CONFIG_PCI
-extern int have_isa_bridge;
-#else
-#define have_isa_bridge		(0)
-#endif
-
 struct pt_regs;
 
 void die(const char *msg, struct pt_regs *regs, int err)
@@ -75,7 +65,7 @@ extern int cpu_architecture(void);
  * The `mb' is to tell GCC not to cache `current' across this call.
  */
 struct thread_info;
-extern struct task_struct *__switch_to(struct thread_info *, struct thread_info *);
+extern struct thread_info *__switch_to(struct thread_info *, struct thread_info *);
 
 #define switch_to(prev,next,last)					\
 	do {			 					\

kernel/cpufreq.c

@@ -354,6 +354,13 @@ static int cpufreq_add_dev (struct device * dev)
 	       &cpufreq_driver->policy[cpu], 
 	       sizeof(struct cpufreq_policy));
 
+	/* 2.4-API init for this CPU */
+#ifdef CONFIG_CPU_FREQ_24_API
+	cpu_min_freq[cpu] = cpufreq_driver->policy[cpu].cpuinfo.min_freq;
+	cpu_max_freq[cpu] = cpufreq_driver->policy[cpu].cpuinfo.max_freq;
+	cpu_cur_freq[cpu] = cpufreq_driver->cpu_cur_freq[cpu];
+#endif
+
 	if (cpufreq_driver->target)
 		cpufreq_governor(cpu, CPUFREQ_GOV_START);