Merge branch 'master'

CREDITS

@@ -120,7 +120,6 @@ D: Author of lil (Linux Interrupt Latency benchmark)
 D: Fixed the shm swap deallocation at swapoff time (try_to_unuse message)
 D: VM hacker
 D: Various other kernel hacks
-S: Via Cicalini 26
 S: Imola 40026
 S: Italy
 

MAINTAINERS

@@ -1752,7 +1752,8 @@ P:	Ralf Baechle
 M:	ralf@linux-mips.org
 W:	http://www.linux-mips.org/
 L:	linux-mips@linux-mips.org
-S:	Maintained
+T:	git www.linux-mips.org:/pub/scm/linux.git
+S:	Supported
 
 MISCELLANEOUS MCA-SUPPORT
 P:	James Bottomley

Makefile

 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 16
-EXTRAVERSION =-rc6
+EXTRAVERSION =
 NAME=Sliding Snow Leopard
 
 # *DOCUMENTATION*

arch/i386/kernel/smpboot.c

@@ -1029,6 +1029,16 @@ int __devinit smp_prepare_cpu(int cpu)
 	int	apicid, ret;
 
 	lock_cpu_hotplug();
+
+	/*
+	 * On x86, CPU0 is never offlined.  Trying to bring up an
+	 * already-booted CPU will hang.  So check for that case.
+	 */
+	if (cpu_online(cpu)) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
 	apicid = x86_cpu_to_apicid[cpu];
 	if (apicid == BAD_APICID) {
 		ret = -ENODEV;

arch/mips/Makefile

@@ -108,7 +108,8 @@ MODFLAGS			+= -mlong-calls
 cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB)
 cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL)
 
-cflags-$(CONFIG_SB1XXX_CORELIS)	+= -mno-sched-prolog -fno-omit-frame-pointer
+cflags-$(CONFIG_SB1XXX_CORELIS)	+= $(call cc-option,-mno-sched-prolog) \
+				   -fno-omit-frame-pointer
 
 #
 # Use: $(call set_gccflags,<cpu0>,<isa0>,<cpu1>,<isa1>,<isa2>)

arch/mips/arc/misc.c

@@ -9,7 +9,6 @@
  * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
  * Copyright (C) 1999 Silicon Graphics, Inc.
  */
-#include <linux/config.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 
@@ -20,17 +19,11 @@
 #include <asm/bootinfo.h>
 #include <asm/system.h>
 
-extern void *sgiwd93_host;
-extern void reset_wd33c93(void *instance);
-
 VOID
 ArcHalt(VOID)
 {
 	bc_disable();
 	local_irq_disable();
-#ifdef CONFIG_SCSI_SGIWD93
-	reset_wd33c93(sgiwd93_host);
-#endif
 	ARC_CALL0(halt);
 never:	goto never;
 }
@@ -40,9 +33,6 @@ ArcPowerDown(VOID)
 {
 	bc_disable();
 	local_irq_disable();
-#ifdef CONFIG_SCSI_SGIWD93
-	reset_wd33c93(sgiwd93_host);
-#endif
 	ARC_CALL0(pdown);
 never:	goto never;
 }
@@ -53,9 +43,6 @@ ArcRestart(VOID)
 {
 	bc_disable();
 	local_irq_disable();
-#ifdef CONFIG_SCSI_SGIWD93
-	reset_wd33c93(sgiwd93_host);
-#endif
 	ARC_CALL0(restart);
 never:	goto never;
 }
@@ -65,9 +52,6 @@ ArcReboot(VOID)
 {
 	bc_disable();
 	local_irq_disable();
-#ifdef CONFIG_SCSI_SGIWD93
-	reset_wd33c93(sgiwd93_host);
-#endif
 	ARC_CALL0(reboot);
 never:	goto never;
 }
@@ -77,9 +61,6 @@ ArcEnterInteractiveMode(VOID)
 {
 	bc_disable();
 	local_irq_disable();
-#ifdef CONFIG_SCSI_SGIWD93
-	reset_wd33c93(sgiwd93_host);
-#endif
 	ARC_CALL0(imode);
 never:	goto never;
 }

arch/mips/au1000/common/reset.c

@@ -164,17 +164,20 @@ void au1000_restart(char *command)
 
 void au1000_halt(void)
 {
-#if defined(CONFIG_MIPS_PB1550)
+#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550)
 	/* power off system */
-	printk("\n** Powering off Pb1550\n");
+	printk("\n** Powering off...\n");
 	au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C);
 	au_sync();
 	while(1); /* should not get here */
-#endif
+#else
 	printk(KERN_NOTICE "\n** You can safely turn off the power\n");
 #ifdef CONFIG_MIPS_MIRAGE
 	au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT);
 #endif
+#ifdef CONFIG_MIPS_DB1200
+	au_writew(au_readw(0xB980001C) | (1<<14), 0xB980001C);
+#endif
 #ifdef CONFIG_PM
 	au_sleep();
 
@@ -187,6 +190,7 @@ void au1000_halt(void)
 	                "wait\n\t"
 			".set\tmips0");
 #endif
+#endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */
 }
 
 void au1000_power_off(void)

arch/mips/kernel/time.c

@@ -424,6 +424,8 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	unsigned long j;
 	unsigned int count;
 
+	write_seqlock(&xtime_lock);
+
 	count = mips_hpt_read();
 	mips_timer_ack();
 
@@ -441,7 +443,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	 * CMOS clock accordingly every ~11 minutes. rtc_set_time() has to be
 	 * called as close as possible to 500 ms before the new second starts.
 	 */
-	write_seqlock(&xtime_lock);
 	if (ntp_synced() &&
 	    xtime.tv_sec > last_rtc_update + 660 &&
 	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
@@ -453,7 +454,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 			last_rtc_update = xtime.tv_sec - 600;
 		}
 	}
-	write_sequnlock(&xtime_lock);
 
 	/*
 	 * If jiffies has overflown in this timer_interrupt, we must
@@ -496,6 +496,8 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 		}
 	}
 
+	write_sequnlock(&xtime_lock);
+
 	/*
 	 * In UP mode, we call local_timer_interrupt() to do profiling
 	 * and process accouting.

arch/mips/mm/c-r4k.c

@@ -375,6 +375,7 @@ static void r4k_flush_cache_mm(struct mm_struct *mm)
 struct flush_cache_page_args {
 	struct vm_area_struct *vma;
 	unsigned long addr;
+	unsigned long pfn;
 };
 
 static inline void local_r4k_flush_cache_page(void *args)
@@ -382,6 +383,7 @@ static inline void local_r4k_flush_cache_page(void *args)
 	struct flush_cache_page_args *fcp_args = args;
 	struct vm_area_struct *vma = fcp_args->vma;
 	unsigned long addr = fcp_args->addr;
+	unsigned long paddr = fcp_args->pfn << PAGE_SHIFT;
 	int exec = vma->vm_flags & VM_EXEC;
 	struct mm_struct *mm = vma->vm_mm;
 	pgd_t *pgdp;
@@ -431,11 +433,12 @@ static inline void local_r4k_flush_cache_page(void *args)
 	 * Do indexed flush, too much work to get the (possible) TLB refills
 	 * to work correctly.
 	 */
-	addr = INDEX_BASE + (addr & (dcache_size - 1));
 	if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc)) {
-		r4k_blast_dcache_page_indexed(addr);
-		if (exec && !cpu_icache_snoops_remote_store)
-			r4k_blast_scache_page_indexed(addr);
+		r4k_blast_dcache_page_indexed(cpu_has_pindexed_dcache ?
+					      paddr : addr);
+		if (exec && !cpu_icache_snoops_remote_store) {
+			r4k_blast_scache_page_indexed(paddr);
+		}
 	}
 	if (exec) {
 		if (cpu_has_vtag_icache) {
@@ -455,6 +458,7 @@ static void r4k_flush_cache_page(struct vm_area_struct *vma,
 
 	args.vma = vma;
 	args.addr = addr;
+	args.pfn = pfn;
 
 	on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1);
 }
@@ -956,6 +960,7 @@ static void __init probe_pcache(void)
 	switch (c->cputype) {
 	case CPU_20KC:
 	case CPU_25KF:
+		c->dcache.flags |= MIPS_CACHE_PINDEX;
 	case CPU_R10000:
 	case CPU_R12000:
 	case CPU_SB1:

arch/mips/mm/c-tx39.c

@@ -210,7 +210,6 @@ static void tx39_flush_cache_page(struct vm_area_struct *vma, unsigned long page
 	 * Do indexed flush, too much work to get the (possible) TLB refills
 	 * to work correctly.
 	 */
-	page = (KSEG0 + (page & (dcache_size - 1)));
 	if (cpu_has_dc_aliases || exec)
 		tx39_blast_dcache_page_indexed(page);
 	if (exec)

arch/mips/sibyte/sb1250/time.c

@@ -47,23 +47,51 @@
 #define IMR_IP3_VAL	K_INT_MAP_I1
 #define IMR_IP4_VAL	K_INT_MAP_I2
 
+#define SB1250_HPT_NUM		3
+#define SB1250_HPT_VALUE	M_SCD_TIMER_CNT /* max value */
+#define SB1250_HPT_SHIFT	((sizeof(unsigned int)*8)-V_SCD_TIMER_WIDTH)
+
+
 extern int sb1250_steal_irq(int irq);
 
+static unsigned int sb1250_hpt_read(void);
+static void sb1250_hpt_init(unsigned int);
+
+static unsigned int hpt_offset;
+
+void __init sb1250_hpt_setup(void)
+{
+	int cpu = smp_processor_id();
+
+	if (!cpu) {
+		/* Setup hpt using timer #3 but do not enable irq for it */
+		__raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CFG)));
+		__raw_writeq(SB1250_HPT_VALUE,
+			     IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_INIT)));
+		__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+			     IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CFG)));
+
+		/*
+		 * we need to fill 32 bits, so just use the upper 23 bits and pretend
+		 * the timer is going 512Mhz instead of 1Mhz
+		 */
+		mips_hpt_frequency = V_SCD_TIMER_FREQ << SB1250_HPT_SHIFT;
+		mips_hpt_init = sb1250_hpt_init;
+		mips_hpt_read = sb1250_hpt_read;
+	}
+}
+
+
 void sb1250_time_init(void)
 {
 	int cpu = smp_processor_id();
 	int irq = K_INT_TIMER_0+cpu;
 
-	/* Only have 4 general purpose timers */
-	if (cpu > 3) {
+	/* Only have 4 general purpose timers, and we use last one as hpt */
+	if (cpu > 2) {
 		BUG();
 	}
 
-	if (!cpu) {
-		/* Use our own gettimeoffset() routine */
-		do_gettimeoffset = sb1250_gettimeoffset;
-	}
-
 	sb1250_mask_irq(cpu, irq);
 
 	/* Map the timer interrupt to ip[4] of this cpu */
@@ -75,10 +103,10 @@ void sb1250_time_init(void)
 	/* Disable the timer and set up the count */
 	__raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
 #ifdef CONFIG_SIMULATION
-	__raw_writeq(50000 / HZ,
+	__raw_writeq((50000 / HZ) - 1,
 		     IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
 #else
-	__raw_writeq(1000000 / HZ,
+	__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1,
 		     IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
 #endif
 
@@ -103,7 +131,7 @@ void sb1250_timer_interrupt(struct pt_regs *regs)
 	int cpu = smp_processor_id();
 	int irq = K_INT_TIMER_0 + cpu;
 
-	/* Reset the timer */
+	/* ACK interrupt */
 	____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
 		       IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
 
@@ -122,15 +150,26 @@ void sb1250_timer_interrupt(struct pt_regs *regs)
 }
 
 /*
- * We use our own do_gettimeoffset() instead of the generic one,
- * because the generic one does not work for SMP case.
- * In addition, since we use general timer 0 for system time,
- * we can get accurate intra-jiffy offset without calibration.
+ * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
+ * again. There's no easy way to set to a specific value so store init value
+ * in hpt_offset and subtract each time.
+ *
+ * Note: Timer isn't full 32bits so shift it into the upper part making
+ *       it appear to run at a higher frequency.
  */
-unsigned long sb1250_gettimeoffset(void)
+static unsigned int sb1250_hpt_read(void)
 {
-	unsigned long count =
-		__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT)));
+	unsigned int count;
 
-	return 1000000/HZ - count;
- }
+	count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT))));
+
+	count = (SB1250_HPT_VALUE - count) << SB1250_HPT_SHIFT;
+
+	return count - hpt_offset;
+}
+
+static void sb1250_hpt_init(unsigned int count)
+{
+	hpt_offset = count;
+	return;
+}

arch/mips/sibyte/swarm/setup.c

@@ -70,6 +70,12 @@ const char *get_system_type(void)
 	return "SiByte " SIBYTE_BOARD_NAME;
 }
 
+void __init swarm_time_init(void)
+{
+	/* Setup HPT */
+	sb1250_hpt_setup();
+}
+
 void __init swarm_timer_setup(struct irqaction *irq)
 {
         /*
@@ -109,6 +115,7 @@ void __init plat_setup(void)
 
 	panic_timeout = 5;  /* For debug.  */
 
+	board_time_init = swarm_time_init;
 	board_timer_setup = swarm_timer_setup;
 	board_be_handler = swarm_be_handler;
 

drivers/md/dm-stripe.c

@@ -103,9 +103,15 @@ static int stripe_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 		return -EINVAL;
 	}
 
+	if (((uint32_t)ti->len) & (chunk_size - 1)) {
+		ti->error = "dm-stripe: Target length not divisible by "
+		    "chunk size";
+		return -EINVAL;
+	}
+
 	width = ti->len;
 	if (sector_div(width, stripes)) {
-		ti->error = "dm-stripe: Target length not divisable by "
+		ti->error = "dm-stripe: Target length not divisible by "
 		    "number of stripes";
 		return -EINVAL;
 	}

drivers/media/video/cx88/Kconfig

@@ -15,20 +15,6 @@ config VIDEO_CX88
 	  To compile this driver as a module, choose M here: the
 	  module will be called cx8800
 
-config VIDEO_CX88_DVB
-	tristate "DVB/ATSC Support for cx2388x based TV cards"
-	depends on VIDEO_CX88 && DVB_CORE
-	select VIDEO_BUF_DVB
-	---help---
-	  This adds support for DVB/ATSC cards based on the
-	  Connexant 2388x chip.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called cx88-dvb.
-
-	  You must also select one or more DVB/ATSC demodulators.
-	  If you are unsure which you need, choose all of them.
-
 config VIDEO_CX88_ALSA
 	tristate "ALSA DMA audio support"
 	depends on VIDEO_CX88 && SND && EXPERIMENTAL
@@ -44,6 +30,20 @@ config VIDEO_CX88_ALSA
 	  To compile this driver as a module, choose M here: the
 	  module will be called cx88-alsa.
 
+config VIDEO_CX88_DVB
+	tristate "DVB/ATSC Support for cx2388x based TV cards"
+	depends on VIDEO_CX88 && DVB_CORE
+	select VIDEO_BUF_DVB
+	---help---
+	  This adds support for DVB/ATSC cards based on the
+	  Connexant 2388x chip.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cx88-dvb.
+
+	  You must also select one or more DVB/ATSC demodulators.
+	  If you are unsure which you need, choose all of them.
+
 config VIDEO_CX88_DVB_ALL_FRONTENDS
 	bool "Build all supported frontends for cx2388x based TV cards"
 	default y

drivers/media/video/em28xx/em28xx-video.c

@@ -367,6 +367,9 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp)
 	em28xx_capture_start(dev, 1);
 	em28xx_resolution_set(dev);
 
+	/* device needs to be initialized before isoc transfer */
+	video_mux(dev, 0);
+
 	/* start the transfer */
 	errCode = em28xx_init_isoc(dev);
 	if (errCode)

drivers/net/tg3.c

@@ -9552,12 +9552,36 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 		}
 	}
 
-	/* Find msi capability. */
+	/* The EPB bridge inside 5714, 5715, and 5780 cannot support
+	 * DMA addresses > 40-bit. This bridge may have other additional
+	 * 57xx devices behind it in some 4-port NIC designs for example.
+	 * Any tg3 device found behind the bridge will also need the 40-bit
+	 * DMA workaround.
+	 */
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) {
 		tp->tg3_flags2 |= TG3_FLG2_5780_CLASS;
+		tp->tg3_flags |= TG3_FLAG_40BIT_DMA_BUG;
 		tp->msi_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_MSI);
 	}
+	else {
+		struct pci_dev *bridge = NULL;
+
+		do {
+			bridge = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
+						PCI_DEVICE_ID_SERVERWORKS_EPB,
+						bridge);
+			if (bridge && bridge->subordinate &&
+			    (bridge->subordinate->number <=
+			     tp->pdev->bus->number) &&
+			    (bridge->subordinate->subordinate >=
+			     tp->pdev->bus->number)) {
+				tp->tg3_flags |= TG3_FLAG_40BIT_DMA_BUG;
+				pci_dev_put(bridge);
+				break;
+			}
+		} while (bridge);
+	}
 
 	/* Initialize misc host control in PCI block. */
 	tp->misc_host_ctrl |= (misc_ctrl_reg &
@@ -10303,7 +10327,14 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
 		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) {
 			u32 ccval = (tr32(TG3PCI_CLOCK_CTRL) & 0x1f);
 
-			if (ccval == 0x6 || ccval == 0x7)
+			/* If the 5704 is behind the EPB bridge, we can
+			 * do the less restrictive ONE_DMA workaround for
+			 * better performance.
+			 */
+			if ((tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG) &&
+			    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)
+				tp->dma_rwctrl |= 0x8000;
+			else if (ccval == 0x6 || ccval == 0x7)
 				tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA;
 
 			/* Set bit 23 to enable PCIX hw bug fix */
@@ -10759,19 +10790,20 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 		goto err_out_iounmap;
 	}
 
-	/* 5714, 5715 and 5780 cannot support DMA addresses > 40-bit.
+	/* The EPB bridge inside 5714, 5715, and 5780 and any
+	 * device behind the EPB cannot support DMA addresses > 40-bit.
 	 * On 64-bit systems with IOMMU, use 40-bit dma_mask.
 	 * On 64-bit systems without IOMMU, use 64-bit dma_mask and
 	 * do DMA address check in tg3_start_xmit().
 	 */
-	if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
+	if (tp->tg3_flags2 & TG3_FLG2_IS_5788)
+		persist_dma_mask = dma_mask = DMA_32BIT_MASK;
+	else if (tp->tg3_flags & TG3_FLAG_40BIT_DMA_BUG) {
 		persist_dma_mask = dma_mask = DMA_40BIT_MASK;
 #ifdef CONFIG_HIGHMEM
 		dma_mask = DMA_64BIT_MASK;
 #endif
-	} else if (tp->tg3_flags2 & TG3_FLG2_IS_5788)
-		persist_dma_mask = dma_mask = DMA_32BIT_MASK;
-	else
+	} else
 		persist_dma_mask = dma_mask = DMA_64BIT_MASK;
 
 	/* Configure DMA attributes. */
@@ -10908,8 +10940,10 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 	       (tp->tg3_flags & TG3_FLAG_SPLIT_MODE) != 0,
 	       (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0,
 	       (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0);
-	printk(KERN_INFO "%s: dma_rwctrl[%08x]\n",
-	       dev->name, tp->dma_rwctrl);
+	printk(KERN_INFO "%s: dma_rwctrl[%08x] dma_mask[%d-bit]\n",
+	       dev->name, tp->dma_rwctrl,
+	       (pdev->dma_mask == DMA_32BIT_MASK) ? 32 :
+	        (((u64) pdev->dma_mask == DMA_40BIT_MASK) ? 40 : 64));
 
 	return 0;
 

drivers/net/tg3.h

@@ -2163,6 +2163,7 @@ struct tg3 {
 #define TG3_FLAG_10_100_ONLY		0x01000000
 #define TG3_FLAG_PAUSE_AUTONEG		0x02000000
 #define TG3_FLAG_IN_RESET_TASK		0x04000000
+#define TG3_FLAG_40BIT_DMA_BUG		0x08000000
 #define TG3_FLAG_BROKEN_CHECKSUMS	0x10000000
 #define TG3_FLAG_GOT_SERDES_FLOWCTL	0x20000000
 #define TG3_FLAG_SPLIT_MODE		0x40000000

fs/9p/vfs_dir.c

@@ -202,7 +202,6 @@ int v9fs_dir_release(struct inode *inode, struct file *filp)
 		filp->private_data = NULL;
 	}
 
-	d_drop(filp->f_dentry);
 	return 0;
 }
 

fs/nfsctl.c

@@ -98,10 +98,8 @@ asmlinkage sys_nfsservctl(int cmd, struct nfsctl_arg __user *arg, void __user *r
 	if (copy_from_user(&version, &arg->ca_version, sizeof(int)))
 		return -EFAULT;
 
-	if (version != NFSCTL_VERSION) {
-		printk(KERN_WARNING "nfsd: incompatible version in syscall.\n");
+	if (version != NFSCTL_VERSION)
 		return -EINVAL;
-	}
 
 	if (cmd < 0 || cmd >= sizeof(map)/sizeof(map[0]) || !map[cmd].name)
 		return -EINVAL;

include/asm-mips/cpu-features.h

@@ -96,6 +96,9 @@
 #ifndef cpu_has_ic_fills_f_dc
 #define cpu_has_ic_fills_f_dc	(cpu_data[0].icache.flags & MIPS_CACHE_IC_F_DC)
 #endif
+#ifndef cpu_has_pindexed_dcache
+#define cpu_has_pindexed_dcache	(cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
+#endif
 
 /*
  * I-Cache snoops remote store.  This only matters on SMP.  Some multiprocessors

include/asm-mips/cpu-info.h

@@ -39,6 +39,7 @@ struct cache_desc {
 #define MIPS_CACHE_ALIASES	0x00000004	/* Cache could have aliases */
 #define MIPS_CACHE_IC_F_DC	0x00000008	/* Ic can refill from D-cache */
 #define MIPS_IC_SNOOPS_REMOTE	0x00000010	/* Ic snoops remote stores */
+#define MIPS_CACHE_PINDEX	0x00000020	/* Physically indexed cache */
 
 struct cpuinfo_mips {
 	unsigned long		udelay_val;

include/asm-mips/hazards.h

@@ -3,7 +3,9 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2003, 2004 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) MIPS Technologies, Inc.
+ *   written by Ralf Baechle <ralf@linux-mips.org>
  */
 #ifndef _ASM_HAZARDS_H
 #define _ASM_HAZARDS_H
@@ -74,8 +76,7 @@
 #define irq_disable_hazard
 	_ehb
 
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \
-      defined(CONFIG_CPU_SB1)
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
 
 /*
  * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
@@ -99,13 +100,13 @@
 #else /* __ASSEMBLY__ */
 
 __asm__(
-	"	.macro	_ssnop					\n\t"
-	"	sll	$0, $0, 1				\n\t"
-	"	.endm						\n\t"
-	"							\n\t"
-	"	.macro	_ehb					\n\t"
-	"	sll	$0, $0, 3				\n\t"
-	"	.endm						\n\t");
+	"	.macro	_ssnop					\n"
+	"	sll	$0, $0, 1				\n"
+	"	.endm						\n"
+	"							\n"
+	"	.macro	_ehb					\n"
+	"	sll	$0, $0, 3				\n"
+	"	.endm						\n");
 
 #ifdef CONFIG_CPU_RM9000
 
@@ -117,17 +118,21 @@ __asm__(
 
 #define mtc0_tlbw_hazard()						\
 	__asm__ __volatile__(						\
-		".set\tmips32\n\t"					\
-		"_ssnop; _ssnop; _ssnop; _ssnop\n\t"			\
-		".set\tmips0")
+	"	.set	mips32					\n"	\
+	"	_ssnop						\n"	\
+	"	_ssnop						\n"	\
+	"	_ssnop						\n"	\
+	"	_ssnop						\n"	\
+	"	.set	mips0					\n")
 
 #define tlbw_use_hazard()						\
 	__asm__ __volatile__(						\
-		".set\tmips32\n\t"					\
-		"_ssnop; _ssnop; _ssnop; _ssnop\n\t"			\
-		".set\tmips0")
-
-#define back_to_back_c0_hazard()	do { } while (0)
+	"	.set	mips32					\n"	\
+	"	_ssnop						\n"	\
+	"	_ssnop						\n"	\
+	"	_ssnop						\n"	\
+	"	_ssnop						\n"	\
+	"	.set	mips0					\n")
 
 #else
 
@@ -136,15 +141,25 @@ __asm__(
  */
 #define mtc0_tlbw_hazard()						\
 	__asm__ __volatile__(						\
-		".set noreorder\n\t"					\
-		"nop; nop; nop; nop; nop; nop;\n\t"			\
-		".set reorder\n\t")
+	"	.set	noreorder				\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	.set	reorder					\n")
 
 #define tlbw_use_hazard()						\
 	__asm__ __volatile__(						\
-		".set noreorder\n\t"					\
-		"nop; nop; nop; nop; nop; nop;\n\t"			\
-		".set reorder\n\t")
+	"	.set	noreorder				\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	.set	reorder					\n")
 
 #endif
 
@@ -156,49 +171,26 @@ __asm__(
 
 #ifdef CONFIG_CPU_MIPSR2
 
-__asm__(
-	"	.macro\tirq_enable_hazard			\n\t"
-	"	_ehb						\n\t"
-	"	.endm						\n\t"
-	"							\n\t"
-	"	.macro\tirq_disable_hazard			\n\t"
-	"	_ehb						\n\t"
-	"	.endm						\n\t"
-	"							\n\t"
-	"	.macro\tback_to_back_c0_hazard			\n\t"
-	"	_ehb						\n\t"
-	"	.endm");
-
-#define irq_enable_hazard()						\
-	__asm__ __volatile__(						\
-	"irq_enable_hazard")
-
-#define irq_disable_hazard()						\
-	__asm__ __volatile__(						\
-	"irq_disable_hazard")
+__asm__("	.macro	irq_enable_hazard			\n"
+	"	_ehb						\n"
+	"	.endm						\n"
+	"							\n"
+	"	.macro	irq_disable_hazard			\n"
+	"	_ehb						\n"
+	"	.endm						\n");
 
-#define back_to_back_c0_hazard()					\
-	__asm__ __volatile__(						\
-	"back_to_back_c0_hazard")
-
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \
-      defined(CONFIG_CPU_SB1)
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
 
 /*
  * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
  */
 
 __asm__(
-	"	.macro\tirq_enable_hazard			\n\t"
-	"	.endm						\n\t"
-	"							\n\t"
-	"	.macro\tirq_disable_hazard			\n\t"
-	"	.endm");
-
-#define irq_enable_hazard()	do { } while (0)
-#define irq_disable_hazard()	do { } while (0)
-
-#define back_to_back_c0_hazard()	do { } while (0)
+	"	.macro	irq_enable_hazard			\n"
+	"	.endm						\n"
+	"							\n"
+	"	.macro	irq_disable_hazard			\n"
+	"	.endm						\n");
 
 #else
 
@@ -209,29 +201,63 @@ __asm__(
  */
 
 __asm__(
-	"	#						\n\t"
-	"	# There is a hazard but we do not care		\n\t"
-	"	#						\n\t"
-	"	.macro\tirq_enable_hazard			\n\t"
-	"	.endm						\n\t"
-	"							\n\t"
-	"	.macro\tirq_disable_hazard			\n\t"
-	"	_ssnop; _ssnop; _ssnop				\n\t"
-	"	.endm");
+	"	#						\n"
+	"	# There is a hazard but we do not care		\n"
+	"	#						\n"
+	"	.macro\tirq_enable_hazard			\n"
+	"	.endm						\n"
+	"							\n"
+	"	.macro\tirq_disable_hazard			\n"
+	"	_ssnop						\n"
+	"	_ssnop						\n"
+	"	_ssnop						\n"
+	"	.endm						\n");
+
+#endif
 
-#define irq_enable_hazard()	do { } while (0)
+#define irq_enable_hazard()						\
+	__asm__ __volatile__("irq_enable_hazard")
 #define irq_disable_hazard()						\
-	__asm__ __volatile__(						\
-	"irq_disable_hazard")
+	__asm__ __volatile__("irq_disable_hazard")
 
-#define back_to_back_c0_hazard()					\
-	__asm__ __volatile__(						\
-	"	.set noreorder				\n"		\
-	"	nop; nop; nop				\n"		\
-	"	.set reorder				\n")
+
+/*
+ * Back-to-back hazards -
+ *
+ * What is needed to separate a move to cp0 from a subsequent read from the
+ * same cp0 register?
+ */
+#ifdef CONFIG_CPU_MIPSR2
+
+__asm__("	.macro	back_to_back_c0_hazard			\n"
+	"	_ehb						\n"
+	"	.endm						\n");
+
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \
+      defined(CONFIG_CPU_SB1)
+
+__asm__("	.macro	back_to_back_c0_hazard			\n"
+	"	.endm						\n");
+
+#else
+
+__asm__("	.macro	back_to_back_c0_hazard			\n"
+	"	.set	noreorder				\n"
+	"	_ssnop						\n"
+	"	_ssnop						\n"
+	"	_ssnop						\n"
+	"	.set	reorder					\n"
+	"	.endm");
 
 #endif
 
+#define back_to_back_c0_hazard()					\
+	__asm__ __volatile__("back_to_back_c0_hazard")
+
+
+/*
+ * Instruction execution hazard
+ */
 #ifdef CONFIG_CPU_MIPSR2
 /*
  * gcc has a tradition of misscompiling the previous construct using the

include/asm-mips/io.h

@@ -4,7 +4,7 @@
  * for more details.
  *
  * Copyright (C) 1994, 1995 Waldorf GmbH
- * Copyright (C) 1994 - 2000 Ralf Baechle
+ * Copyright (C) 1994 - 2000, 06 Ralf Baechle
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  * Copyright (C) 2004, 2005  MIPS Technologies, Inc.  All rights reserved.
  *	Author:	Maciej W. Rozycki <macro@mips.com>
@@ -103,8 +103,20 @@
  */
 extern const unsigned long mips_io_port_base;
 
-#define set_io_port_base(base)	\
-	do { * (unsigned long *) &mips_io_port_base = (base); } while (0)
+/*
+ * Gcc will generate code to load the value of mips_io_port_base after each
+ * function call which may be fairly wasteful in some cases.  So we don't
+ * play quite by the book.  We tell gcc mips_io_port_base is a long variable
+ * which solves the code generation issue.  Now we need to violate the
+ * aliasing rules a little to make initialization possible and finally we
+ * will need the barrier() to fight side effects of the aliasing chat.
+ * This trickery will eventually collapse under gcc's optimizer.  Oh well.
+ */
+static inline void set_io_port_base(unsigned long base)
+{
+	* (unsigned long *) &mips_io_port_base = base;
+	barrier();
+}
 
 /*
  * Thanks to James van Artsdalen for a better timing-fix than

include/asm-mips/r4kcache.h

@@ -257,7 +257,8 @@ static inline void blast_##pfx##cache##lsize##_page(unsigned long page)	\
 									\
 static inline void blast_##pfx##cache##lsize##_page_indexed(unsigned long page) \
 {									\
-	unsigned long start = page;					\
+	unsigned long indexmask = current_cpu_data.desc.waysize - 1;	\
+	unsigned long start = INDEX_BASE + (page & indexmask);		\
 	unsigned long end = start + PAGE_SIZE;				\
 	unsigned long ws_inc = 1UL << current_cpu_data.desc.waybit;	\
 	unsigned long ws_end = current_cpu_data.desc.ways <<		\

include/asm-mips/sibyte/sb1250.h

@@ -45,8 +45,8 @@ extern unsigned int soc_type;
 extern unsigned int periph_rev;
 extern unsigned int zbbus_mhz;
 
+extern void sb1250_hpt_setup(void);
 extern void sb1250_time_init(void);
-extern unsigned long sb1250_gettimeoffset(void);
 extern void sb1250_mask_irq(int cpu, int irq);
 extern void sb1250_unmask_irq(int cpu, int irq);
 extern void sb1250_smp_finish(void);

include/asm-mips/sibyte/sb1250_scd.h

@@ -359,14 +359,15 @@
  */
 
 #define V_SCD_TIMER_FREQ            1000000
+#define V_SCD_TIMER_WIDTH           23
 
 #define S_SCD_TIMER_INIT            0
-#define M_SCD_TIMER_INIT            _SB_MAKEMASK(20,S_SCD_TIMER_INIT)
+#define M_SCD_TIMER_INIT            _SB_MAKEMASK(V_SCD_TIMER_WIDTH,S_SCD_TIMER_INIT)
 #define V_SCD_TIMER_INIT(x)         _SB_MAKEVALUE(x,S_SCD_TIMER_INIT)
 #define G_SCD_TIMER_INIT(x)         _SB_GETVALUE(x,S_SCD_TIMER_INIT,M_SCD_TIMER_INIT)
 
 #define S_SCD_TIMER_CNT             0
-#define M_SCD_TIMER_CNT             _SB_MAKEMASK(20,S_SCD_TIMER_CNT)
+#define M_SCD_TIMER_CNT             _SB_MAKEMASK(V_SCD_TIMER_WIDTH,S_SCD_TIMER_CNT)
 #define V_SCD_TIMER_CNT(x)         _SB_MAKEVALUE(x,S_SCD_TIMER_CNT)
 #define G_SCD_TIMER_CNT(x)         _SB_GETVALUE(x,S_SCD_TIMER_CNT,M_SCD_TIMER_CNT)
 

include/linux/pci_ids.h

@@ -1365,6 +1365,7 @@
 #define PCI_DEVICE_ID_SERVERWORKS_HE	  0x0008
 #define PCI_DEVICE_ID_SERVERWORKS_LE	  0x0009
 #define PCI_DEVICE_ID_SERVERWORKS_GCNB_LE 0x0017
+#define PCI_DEVICE_ID_SERVERWORKS_EPB	  0x0103
 #define PCI_DEVICE_ID_SERVERWORKS_OSB4	  0x0200
 #define PCI_DEVICE_ID_SERVERWORKS_CSB5	  0x0201
 #define PCI_DEVICE_ID_SERVERWORKS_CSB6    0x0203

include/net/ax25.h

@@ -110,8 +110,15 @@ enum {
 enum {
 	AX25_PROTO_STD_SIMPLEX,
 	AX25_PROTO_STD_DUPLEX,
+#ifdef CONFIG_AX25_DAMA_SLAVE
 	AX25_PROTO_DAMA_SLAVE,
-	AX25_PROTO_DAMA_MASTER
+#ifdef CONFIG_AX25_DAMA_MASTER
+	AX25_PROTO_DAMA_MASTER,
+#define AX25_PROTO_MAX AX25_PROTO_DAMA_MASTER
+#endif
+#endif
+	__AX25_PROTO_MAX,
+	AX25_PROTO_MAX = __AX25_PROTO_MAX -1
 };
 
 enum {

include/net/sock.h

@@ -478,9 +478,9 @@ static inline void sk_add_backlog(struct sock *sk, struct sk_buff *skb)
 	rc = __condition;					\
 	if (!rc) {						\
 		*(__timeo) = schedule_timeout(*(__timeo));	\
-		rc = __condition;				\
 	}							\
 	lock_sock(__sk);					\
+	rc = __condition;					\
 	rc;							\
 })
 

kernel/fork.c

@@ -1478,9 +1478,7 @@ static int unshare_vm(unsigned long unshare_flags, struct mm_struct **new_mmp)
 
 	if ((unshare_flags & CLONE_VM) &&
 	    (mm && atomic_read(&mm->mm_users) > 1)) {
-		*new_mmp = dup_mm(current);
-		if (!*new_mmp)
-			return -ENOMEM;
+		return -EINVAL;
 	}
 
 	return 0;
@@ -1569,7 +1567,7 @@ asmlinkage long sys_unshare(unsigned long unshare_flags)
 
 		if (new_sigh) {
 			sigh = current->sighand;
-			current->sighand = new_sigh;
+			rcu_assign_pointer(current->sighand, new_sigh);
 			new_sigh = sigh;
 		}
 

kernel/posix-timers.c

@@ -353,6 +353,7 @@ static int posix_timer_fn(void *data)
 				hrtimer_forward(&timr->it.real.timer,
 						timr->it.real.interval);
 			ret = HRTIMER_RESTART;
+			++timr->it_requeue_pending;
 		}
 	}
 

kernel/timer.c

@@ -1354,8 +1354,8 @@ void __init init_timers(void)
 
 #ifdef CONFIG_TIME_INTERPOLATION
 
-struct time_interpolator *time_interpolator;
-static struct time_interpolator *time_interpolator_list;
+struct time_interpolator *time_interpolator __read_mostly;
+static struct time_interpolator *time_interpolator_list __read_mostly;
 static DEFINE_SPINLOCK(time_interpolator_lock);
 
 static inline u64 time_interpolator_get_cycles(unsigned int src)

mm/memory.c

@@ -623,11 +623,12 @@ static unsigned long zap_pte_range(struct mmu_gather *tlb,
 			(*zap_work)--;
 			continue;
 		}
-		if (pte_present(ptent)) {
-			struct page *page;
 
 		(*zap_work) -= PAGE_SIZE;
 
+		if (pte_present(ptent)) {
+			struct page *page;
+
 			page = vm_normal_page(vma, addr, ptent);
 			if (unlikely(details) && page) {
 				/*

mm/mempolicy.c

@@ -330,9 +330,19 @@ check_range(struct mm_struct *mm, unsigned long start, unsigned long end,
 	int err;
 	struct vm_area_struct *first, *vma, *prev;
 
-	/* Clear the LRU lists so pages can be isolated */
-	if (flags & (MPOL_MF_MOVE | MPOL_MF_MOVE_ALL))
+	if (flags & (MPOL_MF_MOVE | MPOL_MF_MOVE_ALL)) {
+		/* Must have swap device for migration */
+		if (nr_swap_pages <= 0)
+			return ERR_PTR(-ENODEV);
+
+		/*
+		 * Clear the LRU lists so pages can be isolated.
+		 * Note that pages may be moved off the LRU after we have
+		 * drained them. Those pages will fail to migrate like other
+		 * pages that may be busy.
+		 */
 		lru_add_drain_all();
+	}
 
 	first = find_vma(mm, start);
 	if (!first)

mm/swap.c

@@ -393,6 +393,7 @@ void pagevec_strip(struct pagevec *pvec)
 		struct page *page = pvec->pages[i];
 
 		if (PagePrivate(page) && !TestSetPageLocked(page)) {
+			if (PagePrivate(page))
 				try_to_release_page(page, 0);
 			unlock_page(page);
 		}

net/ax25/sysctl_net_ax25.c

@@ -24,7 +24,7 @@ static int min_t3[1],   		max_t3[] = {3600 * HZ};
 static int min_idle[1],  		max_idle[] = {65535 * HZ};
 static int min_n2[] = {1},		max_n2[] = {31};
 static int min_paclen[] = {1},		max_paclen[] = {512};
-static int min_proto[1],		max_proto[] = {3};
+static int min_proto[1],		max_proto[] = { AX25_PROTO_MAX };
 static int min_ds_timeout[1],   	max_ds_timeout[] = {65535 * HZ};
 
 static struct ctl_table_header *ax25_table_header;

scripts/mod/modpost.c

@@ -508,12 +508,7 @@ buf_printf(struct buffer *buf, const char *fmt, ...)
 	
 	va_start(ap, fmt);
 	len = vsnprintf(tmp, SZ, fmt, ap);
-	if (buf->size - buf->pos < len + 1) {
-		buf->size += 128;
-		buf->p = realloc(buf->p, buf->size);
-	}
-	strncpy(buf->p + buf->pos, tmp, len + 1);
-	buf->pos += len;
+	buf_write(buf, tmp, len);
 	va_end(ap);
 }
 
@@ -521,7 +516,7 @@ void
 buf_write(struct buffer *buf, const char *s, int len)
 {
 	if (buf->size - buf->pos < len) {
-		buf->size += len;
+		buf->size += len + SZ;
 		buf->p = realloc(buf->p, buf->size);
 	}
 	strncpy(buf->p + buf->pos, s, len);