Commit d3bf3d84 authored by John Garry's avatar John Garry Committed by Martin K. Petersen

hisi_sas: add v2 channel interrupt handler

This also includes broadcast handler. Unlike v1 hw, broadcast does not
have its own dedicated interrupt.
Signed-off-by: default avatarJohn Garry <john.garry@huawei.com>
Reviewed-by: default avatarHannes Reinecke <hare@suse.de>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 5473c060
...@@ -258,6 +258,7 @@ struct hisi_sas_complete_v2_hdr { ...@@ -258,6 +258,7 @@ struct hisi_sas_complete_v2_hdr {
enum { enum {
HISI_SAS_PHY_PHY_UPDOWN, HISI_SAS_PHY_PHY_UPDOWN,
HISI_SAS_PHY_CHNL_INT,
HISI_SAS_PHY_INT_NR HISI_SAS_PHY_INT_NR
}; };
...@@ -783,8 +784,86 @@ static irqreturn_t int_phy_updown_v2_hw(int irq_no, void *p) ...@@ -783,8 +784,86 @@ static irqreturn_t int_phy_updown_v2_hw(int irq_no, void *p)
return res; return res;
} }
static void phy_bcast_v2_hw(int phy_no, struct hisi_hba *hisi_hba)
{
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
struct asd_sas_phy *sas_phy = &phy->sas_phy;
struct sas_ha_struct *sas_ha = &hisi_hba->sha;
unsigned long flags;
hisi_sas_phy_write32(hisi_hba, phy_no, SL_RX_BCAST_CHK_MSK, 1);
spin_lock_irqsave(&hisi_hba->lock, flags);
sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
spin_unlock_irqrestore(&hisi_hba->lock, flags);
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0,
CHL_INT0_SL_RX_BCST_ACK_MSK);
hisi_sas_phy_write32(hisi_hba, phy_no, SL_RX_BCAST_CHK_MSK, 0);
}
static irqreturn_t int_chnl_int_v2_hw(int irq_no, void *p)
{
struct hisi_hba *hisi_hba = p;
struct device *dev = &hisi_hba->pdev->dev;
u32 ent_msk, ent_tmp, irq_msk;
int phy_no = 0;
ent_msk = hisi_sas_read32(hisi_hba, ENT_INT_SRC_MSK3);
ent_tmp = ent_msk;
ent_msk |= ENT_INT_SRC_MSK3_ENT95_MSK_MSK;
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, ent_msk);
irq_msk = (hisi_sas_read32(hisi_hba, HGC_INVLD_DQE_INFO) >>
HGC_INVLD_DQE_INFO_FB_CH3_OFF) & 0x1ff;
while (irq_msk) {
if (irq_msk & (1 << phy_no)) {
u32 irq_value0 = hisi_sas_phy_read32(hisi_hba, phy_no,
CHL_INT0);
u32 irq_value1 = hisi_sas_phy_read32(hisi_hba, phy_no,
CHL_INT1);
u32 irq_value2 = hisi_sas_phy_read32(hisi_hba, phy_no,
CHL_INT2);
if (irq_value1) {
if (irq_value1 & (CHL_INT1_DMAC_RX_ECC_ERR_MSK |
CHL_INT1_DMAC_TX_ECC_ERR_MSK))
panic("%s: DMAC RX/TX ecc bad error! (0x%x)",
dev_name(dev), irq_value1);
hisi_sas_phy_write32(hisi_hba, phy_no,
CHL_INT1, irq_value1);
}
if (irq_value2)
hisi_sas_phy_write32(hisi_hba, phy_no,
CHL_INT2, irq_value2);
if (irq_value0) {
if (irq_value0 & CHL_INT0_SL_RX_BCST_ACK_MSK)
phy_bcast_v2_hw(phy_no, hisi_hba);
hisi_sas_phy_write32(hisi_hba, phy_no,
CHL_INT0, irq_value0
& (~CHL_INT0_HOTPLUG_TOUT_MSK)
& (~CHL_INT0_SL_PHY_ENABLE_MSK)
& (~CHL_INT0_NOT_RDY_MSK));
}
}
irq_msk &= ~(1 << phy_no);
phy_no++;
}
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, ent_tmp);
return IRQ_HANDLED;
}
static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = { static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = {
int_phy_updown_v2_hw, int_phy_updown_v2_hw,
int_chnl_int_v2_hw,
}; };
/** /**
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment