Merge tag 'regulator-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "A very quiet releases, some fixes and cleanups but not really that
  many of them. There were a couple of new driver specific pieces:

   - Support for controlling the over/under voltage protection on
     BD718xx devices

   - New drivers for Richtek RTQ2134, and RTQ6752"

* tag 'regulator-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (37 commits)
  regulator: vctrl: Avoid lockdep warning in enable/disable ops
  regulator: vctrl: Use locked regulator_get_voltage in probe path
  regulator: Documentation fix for regulator error notification helper
  regulator: Minor regulator documentation fixes.
  regulator: sy7636a: Use the regmap directly
  regulator: sy7636a: Store the epd-pwr-good GPIO locally
  regulator: sy7636a: Use the parent driver data
  regulator: sy7636a: Remove the poll_enable_time
  regulator: sy8827n: Enable REGCACHE_FLAT
  regulator: sy8824x: Enable REGCACHE_FLAT
  regulator: rtq2134: Fix coding style
  regulator: hi6421v600: rename voltage range arrays
  regulator: hi6421v600: use lowercase for ldo
  regulator: fixed: use dev_err_probe for register
  regulator: rtq2134: Add support for Richtek RTQ2134 SubPMIC
  regulator: rtq2134: Add binding document for Richtek RTQ2134 SubPMIC
  regulator: Fix a couple of spelling mistakes in Kconfig
  regulator: rtq6752: fix reg reset behavior
  regulator: da9063: Add support for full-current mode.
  regulator: rt6245: make a const array func_base static, makes object smaller
  ...

Documentation/devicetree/bindings/regulator/richtek,rtq2134-regulator.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rtq2134-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RTQ2134 SubPMIC Regulator
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RTQ2134 is a multi-phase, programmable power management IC that
+  integrates with four high efficient, synchronous step-down converter cores.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RTQ2134-QA/DSQ2134-QA-01.pdf
+
+properties:
+  compatible:
+    enum:
+      - richtek,rtq2134
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^buck[1-3]$":
+        type: object
+        $ref: regulator.yaml#
+        description: |
+          regulator description for buck[1-3].
+
+        properties:
+          richtek,use-vsel-dvs:
+            type: boolean
+            description: |
+              If specified, buck will listen to 'vsel' pin for dvs config.
+              Else, use dvs0 voltage by default.
+
+          richtek,uv-shutdown:
+            type: boolean
+            description: |
+              If specified, use shutdown as UV action. Else, hiccup by default.
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rtq2134@18 {
+        compatible = "richtek,rtq2134";
+        reg = <0x18>;
+
+        regulators {
+          buck1 {
+            regulator-name = "rtq2134-buck1";
+            regulator-min-microvolt = <300000>;
+            regulator-max-microvolt = <1850000>;
+            regulator-always-on;
+            richtek,use-vsel-dvs;
+            regulator-state-mem {
+              regulator-suspend-min-microvolt = <550000>;
+              regulator-suspend-max-microvolt = <550000>;
+            };
+          };
+          buck2 {
+            regulator-name = "rtq2134-buck2";
+            regulator-min-microvolt = <1120000>;
+            regulator-max-microvolt = <1120000>;
+            regulator-always-on;
+            richtek,use-vsel-dvs;
+            regulator-state-mem {
+              regulator-suspend-min-microvolt = <1120000>;
+              regulator-suspend-max-microvolt = <1120000>;
+            };
+          };
+          buck3 {
+            regulator-name = "rtq2134-buck3";
+            regulator-min-microvolt = <600000>;
+            regulator-max-microvolt = <600000>;
+            regulator-always-on;
+            richtek,use-vsel-dvs;
+            regulator-state-mem {
+              regulator-suspend-min-microvolt = <600000>;
+              regulator-suspend-max-microvolt = <600000>;
+            };
+          };
+        };
+      };
+    };

Documentation/devicetree/bindings/regulator/richtek,rtq6752-regulator.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rtq6752-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RTQ6752 TFT LCD Voltage Regulator
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RTQ6752 is an I2C interface pgorammable power management IC. It includes
+  two synchronous boost converter for PAVDD, and one synchronous NAVDD
+  buck-boost. The device is suitable for automotive TFT-LCD panel.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rtq6752
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: |
+      A connection of the chip 'enable' gpio line. If not provided, treat it as
+      external pull up.
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^(p|n)avdd$":
+        type: object
+        $ref: regulator.yaml#
+        description: |
+          regulator description for pavdd and navdd.
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rtq6752@6b {
+        compatible = "richtek,rtq6752";
+        reg = <0x6b>;
+        enable-gpios = <&gpio26 2 0>;
+
+        regulators {
+          pavdd {
+            regulator-name = "rtq6752-pavdd";
+            regulator-min-microvolt = <5000000>;
+            regulator-max-microvolt = <7300000>;
+            regulator-boot-on;
+          };
+          navdd {
+            regulator-name = "rtq6752-navdd";
+            regulator-min-microvolt = <5000000>;
+            regulator-max-microvolt = <7300000>;
+            regulator-boot-on;
+          };
+        };
+      };
+    };

Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/socionext,uniphier-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier regulator controller
+
+description: |
+  This regulator controls VBUS and belongs to USB3 glue layer. Before using
+  the regulator, it is necessary to control the clocks and resets to enable
+  this layer. These clocks and resets should be described in each property.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+  - $ref: "regulator.yaml#"
+
+# USB3 Controller
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pro4-usb3-regulator
+      - socionext,uniphier-pro5-usb3-regulator
+      - socionext,uniphier-pxs2-usb3-regulator
+      - socionext,uniphier-ld20-usb3-regulator
+      - socionext,uniphier-pxs3-usb3-regulator
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    oneOf:
+      - items:          # for Pro4, Pro5
+          - const: gio
+          - const: link
+      - items:          # for others
+          - const: link
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    oneOf:
+      - items:          # for Pro4, Pro5
+          - const: gio
+          - const: link
+      - items:
+          - const: link
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    usb-glue@65b00000 {
+        compatible = "simple-mfd";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x65b00000 0x400>;
+
+        usb_vbus0: regulators@100 {
+            compatible = "socionext,uniphier-ld20-usb3-regulator";
+            reg = <0x100 0x10>;
+            clock-names = "link";
+            clocks = <&sys_clk 14>;
+            reset-names = "link";
+            resets = <&sys_rst 14>;
+        };
+    };
+

Documentation/devicetree/bindings/regulator/uniphier-regulator.txt

-Socionext UniPhier Regulator Controller
-
-This describes the devicetree bindings for regulator controller implemented
-on Socionext UniPhier SoCs.
-
-USB3 Controller
----------------
-
-This regulator controls VBUS and belongs to USB3 glue layer. Before using
-the regulator, it is necessary to control the clocks and resets to enable
-this layer. These clocks and resets should be described in each property.
-
-Required properties:
-- compatible: Should be
-    "socionext,uniphier-pro4-usb3-regulator" - for Pro4 SoC
-    "socionext,uniphier-pro5-usb3-regulator" - for Pro5 SoC
-    "socionext,uniphier-pxs2-usb3-regulator" - for PXs2 SoC
-    "socionext,uniphier-ld20-usb3-regulator" - for LD20 SoC
-    "socionext,uniphier-pxs3-usb3-regulator" - for PXs3 SoC
-- reg: Specifies offset and length of the register set for the device.
-- clocks: A list of phandles to the clock gate for USB3 glue layer.
-	According to the clock-names, appropriate clocks are required.
-- clock-names: Should contain
-    "gio", "link" - for Pro4 and Pro5 SoCs
-    "link"        - for others
-- resets: A list of phandles to the reset control for USB3 glue layer.
-	According to the reset-names, appropriate resets are required.
-- reset-names: Should contain
-    "gio", "link" - for Pro4 and Pro5 SoCs
-    "link"        - for others
-
-See Documentation/devicetree/bindings/regulator/regulator.txt
-for more details about the regulator properties.
-
-Example:
-
-	usb-glue@65b00000 {
-		compatible = "socionext,uniphier-ld20-dwc3-glue",
-			     "simple-mfd";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x65b00000 0x400>;
-
-		usb_vbus0: regulators@100 {
-			compatible = "socionext,uniphier-ld20-usb3-regulator";
-			reg = <0x100 0x10>;
-			clock-names = "link";
-			clocks = <&sys_clk 14>;
-			reset-names = "link";
-			resets = <&sys_rst 14>;
-		};
-
-		phy {
-			...
-			phy-supply = <&usb_vbus0>;
-		};
-		...
-	};

drivers/regulator/Kconfig

@@ -1044,7 +1044,7 @@ config REGULATOR_RT6160
 	help
 	  This adds support for voltage regulator in Richtek RT6160.
 	  This device automatically change voltage output mode from
-	  Buck or Boost. The mode transistion depend on the input source voltage.
+	  Buck or Boost. The mode transition depend on the input source voltage.
 	  The wide output range is from 2025mV to 5200mV and can be used on most
 	  common application scenario.
 
@@ -1053,10 +1053,21 @@ config REGULATOR_RT6245
 	depends on I2C
 	select REGMAP_I2C
 	help
-	  This adds supprot for Richtek RT6245 voltage regulator.
+	  This adds support for Richtek RT6245 voltage regulator.
 	  It can support up to 14A output current and adjustable output voltage
 	  from 0.4375V to 1.3875V, per step 12.5mV.
 
+config REGULATOR_RTQ2134
+	tristate "Richtek RTQ2134 SubPMIC Regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver adds support for RTQ2134 SubPMIC regulators.
+	  The RTQ2134 is a multi-phase, programmable power management IC that
+	  integrate with four high efficient, synchronous step-down converter
+	  cores. It features wide output voltage range and the capability to
+	  configure the corresponding power stages.
+
 config REGULATOR_RTMV20
 	tristate "Richtek RTMV20 Laser Diode Regulator"
 	depends on I2C
@@ -1066,6 +1077,15 @@ config REGULATOR_RTMV20
 	  the Richtek RTMV20. It can support the load current up to 6A and
 	  integrate strobe/vsync/fsin signal to synchronize the IR camera.
 
+config REGULATOR_RTQ6752
+	tristate "Richtek RTQ6752 TFT LCD voltage regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver adds support for Richtek RTQ6752. RTQ6752 includes two
+	  synchronous boost converters for PAVDD, and one synchronous NAVDD
+	  buck-boost. This device is suitable for automotive TFT-LCD panel.
+
 config REGULATOR_S2MPA01
 	tristate "Samsung S2MPA01 voltage regulator"
 	depends on MFD_SEC_CORE || COMPILE_TEST

drivers/regulator/Makefile

@@ -128,6 +128,8 @@ obj-$(CONFIG_REGULATOR_RT5033)	+= rt5033-regulator.o
 obj-$(CONFIG_REGULATOR_RT6160)	+= rt6160-regulator.o
 obj-$(CONFIG_REGULATOR_RT6245)	+= rt6245-regulator.o
 obj-$(CONFIG_REGULATOR_RTMV20)	+= rtmv20-regulator.o
+obj-$(CONFIG_REGULATOR_RTQ2134) += rtq2134-regulator.o
+obj-$(CONFIG_REGULATOR_RTQ6752)	+= rtq6752-regulator.o
 obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
 obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
 obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o

drivers/regulator/da9063-regulator.c

@@ -412,6 +412,134 @@ static int da9063_ldo_set_suspend_mode(struct regulator_dev *rdev,
 	return regmap_field_write(regl->suspend_sleep, val);
 }
 
+static unsigned int da9063_get_overdrive_mask(const struct regulator_desc *desc)
+{
+	switch (desc->id) {
+	case DA9063_ID_BCORES_MERGED:
+	case DA9063_ID_BCORE1:
+		return DA9063_BCORE1_OD;
+	case DA9063_ID_BCORE2:
+		return DA9063_BCORE2_OD;
+	case DA9063_ID_BPRO:
+		return DA9063_BPRO_OD;
+	default:
+		return 0;
+	}
+}
+
+static int da9063_buck_set_limit_set_overdrive(struct regulator_dev *rdev,
+					       int min_uA, int max_uA,
+					       unsigned int overdrive_mask)
+{
+	/*
+	 * When enabling overdrive, do it before changing the current limit to
+	 * ensure sufficient supply throughout the switch.
+	 */
+	struct da9063_regulator *regl = rdev_get_drvdata(rdev);
+	int ret;
+	unsigned int orig_overdrive;
+
+	ret = regmap_read(regl->hw->regmap, DA9063_REG_CONFIG_H,
+			  &orig_overdrive);
+	if (ret < 0)
+		return ret;
+	orig_overdrive &= overdrive_mask;
+
+	if (orig_overdrive == 0) {
+		ret = regmap_set_bits(regl->hw->regmap, DA9063_REG_CONFIG_H,
+				overdrive_mask);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = regulator_set_current_limit_regmap(rdev, min_uA / 2, max_uA / 2);
+	if (ret < 0 && orig_overdrive == 0)
+		/*
+		 * regulator_set_current_limit_regmap may have rejected the
+		 * change because of unusable min_uA and/or max_uA inputs.
+		 * Attempt to restore original overdrive state, ignore failure-
+		 * on-failure.
+		 */
+		regmap_clear_bits(regl->hw->regmap, DA9063_REG_CONFIG_H,
+				  overdrive_mask);
+
+	return ret;
+}
+
+static int da9063_buck_set_limit_clear_overdrive(struct regulator_dev *rdev,
+						 int min_uA, int max_uA,
+						 unsigned int overdrive_mask)
+{
+	/*
+	 * When disabling overdrive, do it after changing the current limit to
+	 * ensure sufficient supply throughout the switch.
+	 */
+	struct da9063_regulator *regl = rdev_get_drvdata(rdev);
+	int ret, orig_limit;
+
+	ret = regmap_read(rdev->regmap, rdev->desc->csel_reg, &orig_limit);
+	if (ret < 0)
+		return ret;
+
+	ret = regulator_set_current_limit_regmap(rdev, min_uA, max_uA);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_clear_bits(regl->hw->regmap, DA9063_REG_CONFIG_H,
+				overdrive_mask);
+	if (ret < 0)
+		/*
+		 * Attempt to restore original current limit, ignore failure-
+		 * on-failure.
+		 */
+		regmap_write(rdev->regmap, rdev->desc->csel_reg, orig_limit);
+
+	return ret;
+}
+
+static int da9063_buck_set_current_limit(struct regulator_dev *rdev,
+					 int min_uA, int max_uA)
+{
+	unsigned int overdrive_mask, n_currents;
+
+	overdrive_mask = da9063_get_overdrive_mask(rdev->desc);
+	if (overdrive_mask) {
+		n_currents = rdev->desc->n_current_limits;
+		if (n_currents == 0)
+			return -EINVAL;
+
+		if (max_uA > rdev->desc->curr_table[n_currents - 1])
+			return da9063_buck_set_limit_set_overdrive(rdev, min_uA,
+								   max_uA,
+								   overdrive_mask);
+
+		return da9063_buck_set_limit_clear_overdrive(rdev, min_uA,
+							     max_uA,
+							     overdrive_mask);
+	}
+	return regulator_set_current_limit_regmap(rdev, min_uA, max_uA);
+}
+
+static int da9063_buck_get_current_limit(struct regulator_dev *rdev)
+{
+	struct da9063_regulator *regl = rdev_get_drvdata(rdev);
+	int val, ret, limit;
+	unsigned int mask;
+
+	limit = regulator_get_current_limit_regmap(rdev);
+	if (limit < 0)
+		return limit;
+	mask = da9063_get_overdrive_mask(rdev->desc);
+	if (mask) {
+		ret = regmap_read(regl->hw->regmap, DA9063_REG_CONFIG_H, &val);
+		if (ret < 0)
+			return ret;
+		if (val & mask)
+			limit *= 2;
+	}
+	return limit;
+}
+
 static const struct regulator_ops da9063_buck_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
@@ -419,8 +547,8 @@ static const struct regulator_ops da9063_buck_ops = {
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 	.list_voltage		= regulator_list_voltage_linear,
-	.set_current_limit	= regulator_set_current_limit_regmap,
-	.get_current_limit	= regulator_get_current_limit_regmap,
+	.set_current_limit	= da9063_buck_set_current_limit,
+	.get_current_limit	= da9063_buck_get_current_limit,
 	.set_mode		= da9063_buck_set_mode,
 	.get_mode		= da9063_buck_get_mode,
 	.get_status		= da9063_buck_get_status,

drivers/regulator/dbx500-prcmu.c

@@ -117,11 +117,11 @@ ux500_regulator_debug_init(struct platform_device *pdev,
 	rdebug.dir = debugfs_create_dir("ux500-regulator", NULL);
 
 	/* create "status" file */
-	debugfs_create_file("status", S_IRUGO, rdebug.dir, &pdev->dev,
+	debugfs_create_file("status", 0444, rdebug.dir, &pdev->dev,
 			    &ux500_regulator_status_fops);
 
 	/* create "power-state-count" file */
-	debugfs_create_file("power-state-count", S_IRUGO, rdebug.dir,
+	debugfs_create_file("power-state-count", 0444, rdebug.dir,
 			    &pdev->dev, &ux500_regulator_power_state_cnt_fops);
 
 	rdebug.regulator_array = regulator_info;

drivers/regulator/devres.c

@@ -205,35 +205,6 @@ struct regulator_dev *devm_regulator_register(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(devm_regulator_register);
 
-static int devm_rdev_match(struct device *dev, void *res, void *data)
-{
-	struct regulator_dev **r = res;
-	if (!r || !*r) {
-		WARN_ON(!r || !*r);
-		return 0;
-	}
-	return *r == data;
-}
-
-/**
- * devm_regulator_unregister - Resource managed regulator_unregister()
- * @dev:  device to supply
- * @rdev: regulator to free
- *
- * Unregister a regulator registered with devm_regulator_register().
- * Normally this function will not need to be called and the resource
- * management code will ensure that the resource is freed.
- */
-void devm_regulator_unregister(struct device *dev, struct regulator_dev *rdev)
-{
-	int rc;
-
-	rc = devres_release(dev, devm_rdev_release, devm_rdev_match, rdev);
-	if (rc != 0)
-		WARN_ON(rc);
-}
-EXPORT_SYMBOL_GPL(devm_regulator_unregister);
-
 struct regulator_supply_alias_match {
 	struct device *dev;
 	const char *id;
@@ -296,19 +267,8 @@ int devm_regulator_register_supply_alias(struct device *dev, const char *id,
 }
 EXPORT_SYMBOL_GPL(devm_regulator_register_supply_alias);
 
-/**
- * devm_regulator_unregister_supply_alias - Resource managed
- * regulator_unregister_supply_alias()
- *
- * @dev: device to supply
- * @id:  supply name or regulator ID
- *
- * Unregister an alias registered with
- * devm_regulator_register_supply_alias(). Normally this function
- * will not need to be called and the resource management code
- * will ensure that the resource is freed.
- */
-void devm_regulator_unregister_supply_alias(struct device *dev, const char *id)
+static void devm_regulator_unregister_supply_alias(struct device *dev,
+						   const char *id)
 {
 	struct regulator_supply_alias_match match;
 	int rc;
@@ -321,7 +281,6 @@ void devm_regulator_unregister_supply_alias(struct device *dev, const char *id)
 	if (rc != 0)
 		WARN_ON(rc);
 }
-EXPORT_SYMBOL_GPL(devm_regulator_unregister_supply_alias);
 
 /**
  * devm_regulator_bulk_register_supply_alias - Managed register
@@ -373,30 +332,6 @@ int devm_regulator_bulk_register_supply_alias(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(devm_regulator_bulk_register_supply_alias);
 
-/**
- * devm_regulator_bulk_unregister_supply_alias - Managed unregister
- * multiple aliases
- *
- * @dev:    device to supply
- * @id:     list of supply names or regulator IDs
- * @num_id: number of aliases to unregister
- *
- * Unregister aliases registered with
- * devm_regulator_bulk_register_supply_alias(). Normally this function
- * will not need to be called and the resource management code
- * will ensure that the resource is freed.
- */
-void devm_regulator_bulk_unregister_supply_alias(struct device *dev,
-						 const char *const *id,
-						 int num_id)
-{
-	int i;
-
-	for (i = 0; i < num_id; ++i)
-		devm_regulator_unregister_supply_alias(dev, id[i]);
-}
-EXPORT_SYMBOL_GPL(devm_regulator_bulk_unregister_supply_alias);
-
 struct regulator_notifier_match {
 	struct regulator *regulator;
 	struct notifier_block *nb;

drivers/regulator/fixed.c

@@ -287,8 +287,9 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
 	drvdata->dev = devm_regulator_register(&pdev->dev, &drvdata->desc,
 					       &cfg);
 	if (IS_ERR(drvdata->dev)) {
-		ret = PTR_ERR(drvdata->dev);
-		dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
+		ret = dev_err_probe(&pdev->dev, PTR_ERR(drvdata->dev),
+				    "Failed to register regulator: %ld\n",
+				    PTR_ERR(drvdata->dev));
 		return ret;
 	}
 

drivers/regulator/hi6421v600-regulator.c

@@ -4,7 +4,7 @@
 //
 // Copyright (c) 2013 Linaro Ltd.
 // Copyright (c) 2011 HiSilicon Ltd.
-// Copyright (c) 2020-2021 Huawei Technologies Co., Ltd
+// Copyright (c) 2020-2021 Huawei Technologies Co., Ltd.
 //
 // Guodong Xu <guodong.xu@linaro.org>
 
@@ -27,34 +27,34 @@ struct hi6421_spmi_reg_info {
 	u32			eco_uA;
 };
 
-static const unsigned int ldo3_voltages[] = {
+static const unsigned int range_1v5_to_2v0[] = {
 	1500000, 1550000, 1600000, 1650000,
 	1700000, 1725000, 1750000, 1775000,
 	1800000, 1825000, 1850000, 1875000,
 	1900000, 1925000, 1950000, 2000000
 };
 
-static const unsigned int ldo4_voltages[] = {
+static const unsigned int range_1v725_to_1v9[] = {
 	1725000, 1750000, 1775000, 1800000,
 	1825000, 1850000, 1875000, 1900000
 };
 
-static const unsigned int ldo9_voltages[] = {
+static const unsigned int range_1v75_to_3v3[] = {
 	1750000, 1800000, 1825000, 2800000,
 	2850000, 2950000, 3000000, 3300000
 };
 
-static const unsigned int ldo15_voltages[] = {
+static const unsigned int range_1v8_to_3v0[] = {
 	1800000, 1850000, 2400000, 2600000,
 	2700000, 2850000, 2950000, 3000000
 };
 
-static const unsigned int ldo17_voltages[] = {
+static const unsigned int range_2v5_to_3v3[] = {
 	2500000, 2600000, 2700000, 2800000,
 	3000000, 3100000, 3200000, 3300000
 };
 
-static const unsigned int ldo34_voltages[] = {
+static const unsigned int range_2v6_to_3v3[] = {
 	2600000, 2700000, 2800000, 2900000,
 	3000000, 3100000, 3200000, 3300000
 };
@@ -73,14 +73,14 @@ static const unsigned int ldo34_voltages[] = {
  */
 #define HI6421V600_LDO(_id, vtable, ereg, emask, vreg,			       \
 		       odelay, etime, ecomask, ecoamp)			       \
-	[HI6421V600_##_id] = {						       \
+	[hi6421v600_##_id] = {						       \
 		.desc = {						       \
 			.name		= #_id,				       \
 			.of_match        = of_match_ptr(#_id),		       \
 			.regulators_node = of_match_ptr("regulators"),	       \
 			.ops		= &hi6421_spmi_ldo_rops,	       \
 			.type		= REGULATOR_VOLTAGE,		       \
-			.id		= HI6421V600_##_id,		       \
+			.id		= hi6421v600_##_id,		       \
 			.owner		= THIS_MODULE,			       \
 			.volt_table	= vtable,			       \
 			.n_voltages	= ARRAY_SIZE(vtable),		       \
@@ -185,46 +185,46 @@ static const struct regulator_ops hi6421_spmi_ldo_rops = {
 
 /* HI6421v600 regulators with known registers */
 enum hi6421_spmi_regulator_id {
-	HI6421V600_LDO3,
-	HI6421V600_LDO4,
-	HI6421V600_LDO9,
-	HI6421V600_LDO15,
-	HI6421V600_LDO16,
-	HI6421V600_LDO17,
-	HI6421V600_LDO33,
-	HI6421V600_LDO34,
+	hi6421v600_ldo3,
+	hi6421v600_ldo4,
+	hi6421v600_ldo9,
+	hi6421v600_ldo15,
+	hi6421v600_ldo16,
+	hi6421v600_ldo17,
+	hi6421v600_ldo33,
+	hi6421v600_ldo34,
 };
 
 static struct hi6421_spmi_reg_info regulator_info[] = {
-	HI6421V600_LDO(LDO3, ldo3_voltages,
+	HI6421V600_LDO(ldo3, range_1v5_to_2v0,
 		       0x16, 0x01, 0x51,
 		       20000, 120,
 		       0, 0),
-	HI6421V600_LDO(LDO4, ldo4_voltages,
+	HI6421V600_LDO(ldo4, range_1v725_to_1v9,
 		       0x17, 0x01, 0x52,
 		       20000, 120,
 		       0x10, 10000),
-	HI6421V600_LDO(LDO9, ldo9_voltages,
+	HI6421V600_LDO(ldo9, range_1v75_to_3v3,
 		       0x1c, 0x01, 0x57,
 		       20000, 360,
 		       0x10, 10000),
-	HI6421V600_LDO(LDO15, ldo15_voltages,
+	HI6421V600_LDO(ldo15, range_1v8_to_3v0,
 		       0x21, 0x01, 0x5c,
 		       20000, 360,
 		       0x10, 10000),
-	HI6421V600_LDO(LDO16, ldo15_voltages,
+	HI6421V600_LDO(ldo16, range_1v8_to_3v0,
 		       0x22, 0x01, 0x5d,
 		       20000, 360,
 		       0x10, 10000),
-	HI6421V600_LDO(LDO17, ldo17_voltages,
+	HI6421V600_LDO(ldo17, range_2v5_to_3v3,
 		       0x23, 0x01, 0x5e,
 		       20000, 120,
 		       0x10, 10000),
-	HI6421V600_LDO(LDO33, ldo17_voltages,
+	HI6421V600_LDO(ldo33, range_2v5_to_3v3,
 		       0x32, 0x01, 0x6d,
 		       20000, 120,
 		       0, 0),
-	HI6421V600_LDO(LDO34, ldo34_voltages,
+	HI6421V600_LDO(ldo34, range_2v6_to_3v3,
 		       0x33, 0x01, 0x6e,
 		       20000, 120,
 		       0, 0),

drivers/regulator/irq_helpers.c

@@ -184,7 +184,7 @@ static irqreturn_t regulator_notifier_isr(int irq, void *data)
 	 * If retry_count exceeds the given safety limit we call IC specific die
 	 * handler which can try disabling regulator(s).
 	 *
-	 * If no die handler is given we will just bug() as a last resort.
+	 * If no die handler is given we will just power-off as a last resort.
 	 *
 	 * We could try disabling all associated rdevs - but we might shoot
 	 * ourselves in the head and leave the problematic regulator enabled. So

drivers/regulator/mt6358-regulator.c

@@ -28,18 +28,15 @@ struct mt6358_regulator_info {
 	u32 qi;
 	const u32 *index_table;
 	unsigned int n_table;
-	u32 vsel_shift;
 	u32 da_vsel_reg;
 	u32 da_vsel_mask;
-	u32 da_vsel_shift;
 	u32 modeset_reg;
 	u32 modeset_mask;
-	u32 modeset_shift;
 };
 
 #define MT6358_BUCK(match, vreg, min, max, step,		\
 	volt_ranges, vosel_mask, _da_vsel_reg, _da_vsel_mask,	\
-	_da_vsel_shift, _modeset_reg, _modeset_shift)		\
+	_modeset_reg, _modeset_shift)		\
 [MT6358_ID_##vreg] = {	\
 	.desc = {	\
 		.name = #vreg,	\
@@ -61,15 +58,13 @@ struct mt6358_regulator_info {
 	.qi = BIT(0),	\
 	.da_vsel_reg = _da_vsel_reg,	\
 	.da_vsel_mask = _da_vsel_mask,	\
-	.da_vsel_shift = _da_vsel_shift,	\
 	.modeset_reg = _modeset_reg,	\
 	.modeset_mask = BIT(_modeset_shift),	\
-	.modeset_shift = _modeset_shift	\
 }
 
 #define MT6358_LDO(match, vreg, ldo_volt_table,	\
 	ldo_index_table, enreg, enbit, vosel,	\
-	vosel_mask, vosel_shift)	\
+	vosel_mask)	\
 [MT6358_ID_##vreg] = {	\
 	.desc = {	\
 		.name = #vreg,	\
@@ -89,12 +84,11 @@ struct mt6358_regulator_info {
 	.qi = BIT(15),	\
 	.index_table = ldo_index_table,	\
 	.n_table = ARRAY_SIZE(ldo_index_table),	\
-	.vsel_shift = vosel_shift,	\
 }
 
 #define MT6358_LDO1(match, vreg, min, max, step,	\
 	volt_ranges, _da_vsel_reg, _da_vsel_mask,	\
-	_da_vsel_shift, vosel, vosel_mask)	\
+	vosel, vosel_mask)	\
 [MT6358_ID_##vreg] = {	\
 	.desc = {	\
 		.name = #vreg,	\
@@ -113,7 +107,6 @@ struct mt6358_regulator_info {
 	},	\
 	.da_vsel_reg = _da_vsel_reg,	\
 	.da_vsel_mask = _da_vsel_mask,	\
-	.da_vsel_shift = _da_vsel_shift,	\
 	.status_reg = MT6358_LDO_##vreg##_DBG1,	\
 	.qi = BIT(0),	\
 }
@@ -260,9 +253,9 @@ static int mt6358_set_voltage_sel(struct regulator_dev *rdev,
 	pvol = info->index_table;
 
 	idx = pvol[selector];
+	idx <<= ffs(info->desc.vsel_mask) - 1;
 	ret = regmap_update_bits(rdev->regmap, info->desc.vsel_reg,
-				 info->desc.vsel_mask,
-				 idx << info->vsel_shift);
+				 info->desc.vsel_mask, idx);
 
 	return ret;
 }
@@ -282,7 +275,8 @@ static int mt6358_get_voltage_sel(struct regulator_dev *rdev)
 		return ret;
 	}
 
-	selector = (selector & info->desc.vsel_mask) >> info->vsel_shift;
+	selector = (selector & info->desc.vsel_mask) >>
+			(ffs(info->desc.vsel_mask) - 1);
 	pvol = info->index_table;
 	for (idx = 0; idx < info->desc.n_voltages; idx++) {
 		if (pvol[idx] == selector)
@@ -305,7 +299,7 @@ static int mt6358_get_buck_voltage_sel(struct regulator_dev *rdev)
 		return ret;
 	}
 
-	ret = (regval >> info->da_vsel_shift) & info->da_vsel_mask;
+	ret = (regval & info->da_vsel_mask) >> (ffs(info->da_vsel_mask) - 1);
 
 	return ret;
 }
@@ -342,11 +336,10 @@ static int mt6358_regulator_set_mode(struct regulator_dev *rdev,
 		return -EINVAL;
 	}
 
-	dev_dbg(&rdev->dev, "mt6358 buck set_mode %#x, %#x, %#x, %#x\n",
-		info->modeset_reg, info->modeset_mask,
-		info->modeset_shift, val);
+	dev_dbg(&rdev->dev, "mt6358 buck set_mode %#x, %#x, %#x\n",
+		info->modeset_reg, info->modeset_mask, val);
 
-	val <<= info->modeset_shift;
+	val <<= ffs(info->modeset_mask) - 1;
 
 	return regmap_update_bits(rdev->regmap, info->modeset_reg,
 				  info->modeset_mask, val);
@@ -364,7 +357,7 @@ static unsigned int mt6358_regulator_get_mode(struct regulator_dev *rdev)
 		return ret;
 	}
 
-	switch ((regval & info->modeset_mask) >> info->modeset_shift) {
+	switch ((regval & info->modeset_mask) >> (ffs(info->modeset_mask) - 1)) {
 	case MT6358_BUCK_MODE_AUTO:
 		return REGULATOR_MODE_NORMAL;
 	case MT6358_BUCK_MODE_FORCE_PWM:
@@ -412,30 +405,30 @@ static const struct regulator_ops mt6358_volt_fixed_ops = {
 static struct mt6358_regulator_info mt6358_regulators[] = {
 	MT6358_BUCK("buck_vdram1", VDRAM1, 500000, 2087500, 12500,
 		    buck_volt_range2, 0x7f, MT6358_BUCK_VDRAM1_DBG0, 0x7f,
-		    0, MT6358_VDRAM1_ANA_CON0, 8),
+		    MT6358_VDRAM1_ANA_CON0, 8),
 	MT6358_BUCK("buck_vcore", VCORE, 500000, 1293750, 6250,
 		    buck_volt_range1, 0x7f, MT6358_BUCK_VCORE_DBG0, 0x7f,
-		    0, MT6358_VCORE_VGPU_ANA_CON0, 1),
+		    MT6358_VCORE_VGPU_ANA_CON0, 1),
 	MT6358_BUCK("buck_vpa", VPA, 500000, 3650000, 50000,
-		    buck_volt_range3, 0x3f, MT6358_BUCK_VPA_DBG0, 0x3f, 0,
+		    buck_volt_range3, 0x3f, MT6358_BUCK_VPA_DBG0, 0x3f,
 		    MT6358_VPA_ANA_CON0, 3),
 	MT6358_BUCK("buck_vproc11", VPROC11, 500000, 1293750, 6250,
 		    buck_volt_range1, 0x7f, MT6358_BUCK_VPROC11_DBG0, 0x7f,
-		    0, MT6358_VPROC_ANA_CON0, 1),
+		    MT6358_VPROC_ANA_CON0, 1),
 	MT6358_BUCK("buck_vproc12", VPROC12, 500000, 1293750, 6250,
 		    buck_volt_range1, 0x7f, MT6358_BUCK_VPROC12_DBG0, 0x7f,
-		    0, MT6358_VPROC_ANA_CON0, 2),
+		    MT6358_VPROC_ANA_CON0, 2),
 	MT6358_BUCK("buck_vgpu", VGPU, 500000, 1293750, 6250,
-		    buck_volt_range1, 0x7f, MT6358_BUCK_VGPU_ELR0, 0x7f, 0,
+		    buck_volt_range1, 0x7f, MT6358_BUCK_VGPU_ELR0, 0x7f,
 		    MT6358_VCORE_VGPU_ANA_CON0, 2),
 	MT6358_BUCK("buck_vs2", VS2, 500000, 2087500, 12500,
-		    buck_volt_range2, 0x7f, MT6358_BUCK_VS2_DBG0, 0x7f, 0,
+		    buck_volt_range2, 0x7f, MT6358_BUCK_VS2_DBG0, 0x7f,
 		    MT6358_VS2_ANA_CON0, 8),
 	MT6358_BUCK("buck_vmodem", VMODEM, 500000, 1293750, 6250,
 		    buck_volt_range1, 0x7f, MT6358_BUCK_VMODEM_DBG0, 0x7f,
-		    0, MT6358_VMODEM_ANA_CON0, 8),
+		    MT6358_VMODEM_ANA_CON0, 8),
 	MT6358_BUCK("buck_vs1", VS1, 1000000, 2587500, 12500,
-		    buck_volt_range4, 0x7f, MT6358_BUCK_VS1_DBG0, 0x7f, 0,
+		    buck_volt_range4, 0x7f, MT6358_BUCK_VS1_DBG0, 0x7f,
 		    MT6358_VS1_ANA_CON0, 8),
 	MT6358_REG_FIXED("ldo_vrf12", VRF12,
 			 MT6358_LDO_VRF12_CON0, 0, 1200000),
@@ -457,49 +450,49 @@ static struct mt6358_regulator_info mt6358_regulators[] = {
 	MT6358_REG_FIXED("ldo_vaud28", VAUD28,
 			 MT6358_LDO_VAUD28_CON0, 0, 2800000),
 	MT6358_LDO("ldo_vdram2", VDRAM2, vdram2_voltages, vdram2_idx,
-		   MT6358_LDO_VDRAM2_CON0, 0, MT6358_LDO_VDRAM2_ELR0, 0xf, 0),
+		   MT6358_LDO_VDRAM2_CON0, 0, MT6358_LDO_VDRAM2_ELR0, 0xf),
 	MT6358_LDO("ldo_vsim1", VSIM1, vsim_voltages, vsim_idx,
-		   MT6358_LDO_VSIM1_CON0, 0, MT6358_VSIM1_ANA_CON0, 0xf00, 8),
+		   MT6358_LDO_VSIM1_CON0, 0, MT6358_VSIM1_ANA_CON0, 0xf00),
 	MT6358_LDO("ldo_vibr", VIBR, vibr_voltages, vibr_idx,
-		   MT6358_LDO_VIBR_CON0, 0, MT6358_VIBR_ANA_CON0, 0xf00, 8),
+		   MT6358_LDO_VIBR_CON0, 0, MT6358_VIBR_ANA_CON0, 0xf00),
 	MT6358_LDO("ldo_vusb", VUSB, vusb_voltages, vusb_idx,
-		   MT6358_LDO_VUSB_CON0_0, 0, MT6358_VUSB_ANA_CON0, 0x700, 8),
+		   MT6358_LDO_VUSB_CON0_0, 0, MT6358_VUSB_ANA_CON0, 0x700),
 	MT6358_LDO("ldo_vcamd", VCAMD, vcamd_voltages, vcamd_idx,
-		   MT6358_LDO_VCAMD_CON0, 0, MT6358_VCAMD_ANA_CON0, 0xf00, 8),
+		   MT6358_LDO_VCAMD_CON0, 0, MT6358_VCAMD_ANA_CON0, 0xf00),
 	MT6358_LDO("ldo_vefuse", VEFUSE, vefuse_voltages, vefuse_idx,
-		   MT6358_LDO_VEFUSE_CON0, 0, MT6358_VEFUSE_ANA_CON0, 0xf00, 8),
+		   MT6358_LDO_VEFUSE_CON0, 0, MT6358_VEFUSE_ANA_CON0, 0xf00),
 	MT6358_LDO("ldo_vmch", VMCH, vmch_vemc_voltages, vmch_vemc_idx,
-		   MT6358_LDO_VMCH_CON0, 0, MT6358_VMCH_ANA_CON0, 0x700, 8),
+		   MT6358_LDO_VMCH_CON0, 0, MT6358_VMCH_ANA_CON0, 0x700),
 	MT6358_LDO("ldo_vcama1", VCAMA1, vcama_voltages, vcama_idx,
-		   MT6358_LDO_VCAMA1_CON0, 0, MT6358_VCAMA1_ANA_CON0, 0xf00, 8),
+		   MT6358_LDO_VCAMA1_CON0, 0, MT6358_VCAMA1_ANA_CON0, 0xf00),
 	MT6358_LDO("ldo_vemc", VEMC, vmch_vemc_voltages, vmch_vemc_idx,
-		   MT6358_LDO_VEMC_CON0, 0, MT6358_VEMC_ANA_CON0, 0x700, 8),
+		   MT6358_LDO_VEMC_CON0, 0, MT6358_VEMC_ANA_CON0, 0x700),
 	MT6358_LDO("ldo_vcn33_bt", VCN33_BT, vcn33_bt_wifi_voltages,
 		   vcn33_bt_wifi_idx, MT6358_LDO_VCN33_CON0_0,
-		   0, MT6358_VCN33_ANA_CON0, 0x300, 8),
+		   0, MT6358_VCN33_ANA_CON0, 0x300),
 	MT6358_LDO("ldo_vcn33_wifi", VCN33_WIFI, vcn33_bt_wifi_voltages,
 		   vcn33_bt_wifi_idx, MT6358_LDO_VCN33_CON0_1,
-		   0, MT6358_VCN33_ANA_CON0, 0x300, 8),
+		   0, MT6358_VCN33_ANA_CON0, 0x300),
 	MT6358_LDO("ldo_vcama2", VCAMA2, vcama_voltages, vcama_idx,
-		   MT6358_LDO_VCAMA2_CON0, 0, MT6358_VCAMA2_ANA_CON0, 0xf00, 8),
+		   MT6358_LDO_VCAMA2_CON0, 0, MT6358_VCAMA2_ANA_CON0, 0xf00),
 	MT6358_LDO("ldo_vmc", VMC, vmc_voltages, vmc_idx,
-		   MT6358_LDO_VMC_CON0, 0, MT6358_VMC_ANA_CON0, 0xf00, 8),
+		   MT6358_LDO_VMC_CON0, 0, MT6358_VMC_ANA_CON0, 0xf00),
 	MT6358_LDO("ldo_vldo28", VLDO28, vldo28_voltages, vldo28_idx,
 		   MT6358_LDO_VLDO28_CON0_0, 0,
-		   MT6358_VLDO28_ANA_CON0, 0x300, 8),
+		   MT6358_VLDO28_ANA_CON0, 0x300),
 	MT6358_LDO("ldo_vsim2", VSIM2, vsim_voltages, vsim_idx,
-		   MT6358_LDO_VSIM2_CON0, 0, MT6358_VSIM2_ANA_CON0, 0xf00, 8),
+		   MT6358_LDO_VSIM2_CON0, 0, MT6358_VSIM2_ANA_CON0, 0xf00),
 	MT6358_LDO1("ldo_vsram_proc11", VSRAM_PROC11, 500000, 1293750, 6250,
-		    buck_volt_range1, MT6358_LDO_VSRAM_PROC11_DBG0, 0x7f, 8,
+		    buck_volt_range1, MT6358_LDO_VSRAM_PROC11_DBG0, 0x7f00,
 		    MT6358_LDO_VSRAM_CON0, 0x7f),
 	MT6358_LDO1("ldo_vsram_others", VSRAM_OTHERS, 500000, 1293750, 6250,
-		    buck_volt_range1, MT6358_LDO_VSRAM_OTHERS_DBG0, 0x7f, 8,
+		    buck_volt_range1, MT6358_LDO_VSRAM_OTHERS_DBG0, 0x7f00,
 		    MT6358_LDO_VSRAM_CON2, 0x7f),
 	MT6358_LDO1("ldo_vsram_gpu", VSRAM_GPU, 500000, 1293750, 6250,
-		    buck_volt_range1, MT6358_LDO_VSRAM_GPU_DBG0, 0x7f, 8,
+		    buck_volt_range1, MT6358_LDO_VSRAM_GPU_DBG0, 0x7f00,
 		    MT6358_LDO_VSRAM_CON3, 0x7f),
 	MT6358_LDO1("ldo_vsram_proc12", VSRAM_PROC12, 500000, 1293750, 6250,
-		    buck_volt_range1, MT6358_LDO_VSRAM_PROC12_DBG0, 0x7f, 8,
+		    buck_volt_range1, MT6358_LDO_VSRAM_PROC12_DBG0, 0x7f00,
 		    MT6358_LDO_VSRAM_CON1, 0x7f),
 };
 

drivers/regulator/mt6359-regulator.c

@@ -27,7 +27,6 @@
  * @qi: Mask for query enable signal status of regulators.
  * @modeset_reg: for operating AUTO/PWM mode register.
  * @modeset_mask: MASK for operating modeset register.
- * @modeset_shift: SHIFT for operating modeset register.
  */
 struct mt6359_regulator_info {
 	struct regulator_desc desc;
@@ -35,10 +34,8 @@ struct mt6359_regulator_info {
 	u32 qi;
 	u32 modeset_reg;
 	u32 modeset_mask;
-	u32 modeset_shift;
 	u32 lp_mode_reg;
 	u32 lp_mode_mask;
-	u32 lp_mode_shift;
 };
 
 #define MT6359_BUCK(match, _name, min, max, step,		\
@@ -68,10 +65,8 @@ struct mt6359_regulator_info {
 	.qi = BIT(0),						\
 	.lp_mode_reg = _lp_mode_reg,				\
 	.lp_mode_mask = BIT(_lp_mode_shift),			\
-	.lp_mode_shift = _lp_mode_shift,			\
 	.modeset_reg = _modeset_reg,				\
 	.modeset_mask = BIT(_modeset_shift),			\
-	.modeset_shift = _modeset_shift				\
 }
 
 #define MT6359_LDO_LINEAR(match, _name, min, max, step,		\
@@ -282,8 +277,10 @@ static unsigned int mt6359_regulator_get_mode(struct regulator_dev *rdev)
 		return ret;
 	}
 
-	if ((regval & info->modeset_mask) >> info->modeset_shift ==
-		MT6359_BUCK_MODE_FORCE_PWM)
+	regval &= info->modeset_mask;
+	regval >>= ffs(info->modeset_mask) - 1;
+
+	if (regval == MT6359_BUCK_MODE_FORCE_PWM)
 		return REGULATOR_MODE_FAST;
 
 	ret = regmap_read(rdev->regmap, info->lp_mode_reg, &regval);
@@ -310,7 +307,7 @@ static int mt6359_regulator_set_mode(struct regulator_dev *rdev,
 	switch (mode) {
 	case REGULATOR_MODE_FAST:
 		val = MT6359_BUCK_MODE_FORCE_PWM;
-		val <<= info->modeset_shift;
+		val <<= ffs(info->modeset_mask) - 1;
 		ret = regmap_update_bits(rdev->regmap,
 					 info->modeset_reg,
 					 info->modeset_mask,
@@ -319,14 +316,14 @@ static int mt6359_regulator_set_mode(struct regulator_dev *rdev,
 	case REGULATOR_MODE_NORMAL:
 		if (curr_mode == REGULATOR_MODE_FAST) {
 			val = MT6359_BUCK_MODE_AUTO;
-			val <<= info->modeset_shift;
+			val <<= ffs(info->modeset_mask) - 1;
 			ret = regmap_update_bits(rdev->regmap,
 						 info->modeset_reg,
 						 info->modeset_mask,
 						 val);
 		} else if (curr_mode == REGULATOR_MODE_IDLE) {
 			val = MT6359_BUCK_MODE_NORMAL;
-			val <<= info->lp_mode_shift;
+			val <<= ffs(info->lp_mode_mask) - 1;
 			ret = regmap_update_bits(rdev->regmap,
 						 info->lp_mode_reg,
 						 info->lp_mode_mask,
@@ -336,7 +333,7 @@ static int mt6359_regulator_set_mode(struct regulator_dev *rdev,
 		break;
 	case REGULATOR_MODE_IDLE:
 		val = MT6359_BUCK_MODE_LP >> 1;
-		val <<= info->lp_mode_shift;
+		val <<= ffs(info->lp_mode_mask) - 1;
 		ret = regmap_update_bits(rdev->regmap,
 					 info->lp_mode_reg,
 					 info->lp_mode_mask,

drivers/regulator/mt6397-regulator.c

@@ -32,7 +32,6 @@ struct mt6397_regulator_info {
 	u32 vselctrl_mask;
 	u32 modeset_reg;
 	u32 modeset_mask;
-	u32 modeset_shift;
 };
 
 #define MT6397_BUCK(match, vreg, min, max, step, volt_ranges, enreg,	\
@@ -61,7 +60,6 @@ struct mt6397_regulator_info {
 	.vselctrl_mask = BIT(1),					\
 	.modeset_reg = _modeset_reg,					\
 	.modeset_mask = BIT(_modeset_shift),				\
-	.modeset_shift = _modeset_shift					\
 }
 
 #define MT6397_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel,	\
@@ -175,11 +173,11 @@ static int mt6397_regulator_set_mode(struct regulator_dev *rdev,
 		goto err_mode;
 	}
 
-	dev_dbg(&rdev->dev, "mt6397 buck set_mode %#x, %#x, %#x, %#x\n",
-		info->modeset_reg, info->modeset_mask,
-		info->modeset_shift, val);
+	dev_dbg(&rdev->dev, "mt6397 buck set_mode %#x, %#x, %#x\n",
+		info->modeset_reg, info->modeset_mask, val);
+
+	val <<= ffs(info->modeset_mask) - 1;
 
-	val <<= info->modeset_shift;
 	ret = regmap_update_bits(rdev->regmap, info->modeset_reg,
 				 info->modeset_mask, val);
 err_mode:
@@ -204,7 +202,10 @@ static unsigned int mt6397_regulator_get_mode(struct regulator_dev *rdev)
 		return ret;
 	}
 
-	switch ((regval & info->modeset_mask) >> info->modeset_shift) {
+	regval &= info->modeset_mask;
+	regval >>= ffs(info->modeset_mask) - 1;
+
+	switch (regval) {
 	case MT6397_BUCK_MODE_AUTO:
 		return REGULATOR_MODE_NORMAL;
 	case MT6397_BUCK_MODE_FORCE_PWM:

drivers/regulator/rt5033-regulator.c

@@ -13,6 +13,16 @@
 #include <linux/mfd/rt5033-private.h>
 #include <linux/regulator/of_regulator.h>
 
+static const struct linear_range rt5033_buck_ranges[] = {
+	REGULATOR_LINEAR_RANGE(1000000, 0, 20, 100000),
+	REGULATOR_LINEAR_RANGE(3000000, 21, 31, 0),
+};
+
+static const struct linear_range rt5033_ldo_ranges[] = {
+	REGULATOR_LINEAR_RANGE(1200000, 0, 18, 100000),
+	REGULATOR_LINEAR_RANGE(3000000, 19, 31, 0),
+};
+
 static const struct regulator_ops rt5033_safe_ldo_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
@@ -24,8 +34,7 @@ static const struct regulator_ops rt5033_buck_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
-	.list_voltage		= regulator_list_voltage_linear,
-	.map_voltage		= regulator_map_voltage_linear,
+	.list_voltage		= regulator_list_voltage_linear_range,
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 };
@@ -40,8 +49,8 @@ static const struct regulator_desc rt5033_supported_regulators[] = {
 		.type		= REGULATOR_VOLTAGE,
 		.owner		= THIS_MODULE,
 		.n_voltages	= RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM,
-		.min_uV		= RT5033_REGULATOR_BUCK_VOLTAGE_MIN,
-		.uV_step	= RT5033_REGULATOR_BUCK_VOLTAGE_STEP,
+		.linear_ranges	= rt5033_buck_ranges,
+		.n_linear_ranges = ARRAY_SIZE(rt5033_buck_ranges),
 		.enable_reg	= RT5033_REG_CTRL,
 		.enable_mask	= RT5033_CTRL_EN_BUCK_MASK,
 		.vsel_reg	= RT5033_REG_BUCK_CTRL,
@@ -56,8 +65,8 @@ static const struct regulator_desc rt5033_supported_regulators[] = {
 		.type		= REGULATOR_VOLTAGE,
 		.owner		= THIS_MODULE,
 		.n_voltages	= RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM,
-		.min_uV		= RT5033_REGULATOR_LDO_VOLTAGE_MIN,
-		.uV_step	= RT5033_REGULATOR_LDO_VOLTAGE_STEP,
+		.linear_ranges	= rt5033_ldo_ranges,
+		.n_linear_ranges = ARRAY_SIZE(rt5033_ldo_ranges),
 		.enable_reg	= RT5033_REG_CTRL,
 		.enable_mask	= RT5033_CTRL_EN_LDO_MASK,
 		.vsel_reg	= RT5033_REG_LDO_CTRL,

drivers/regulator/rt6245-regulator.c

@@ -144,7 +144,7 @@ static int rt6245_init_device_properties(struct device *dev)
 static int rt6245_reg_write(void *context, unsigned int reg, unsigned int val)
 {
 	struct i2c_client *i2c = context;
-	const u8 func_base[] = { 0x6F, 0x73, 0x78, 0x61, 0x7C, 0 };
+	static const u8 func_base[] = { 0x6F, 0x73, 0x78, 0x61, 0x7C, 0 };
 	unsigned int code, bit_count;
 
 	code = func_base[reg];

drivers/regulator/rtq6752-regulator.c

+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+enum {
+	RTQ6752_IDX_PAVDD = 0,
+	RTQ6752_IDX_NAVDD = 1,
+	RTQ6752_IDX_MAX
+};
+
+#define RTQ6752_REG_PAVDD	0x00
+#define RTQ6752_REG_NAVDD	0x01
+#define RTQ6752_REG_PAVDDONDLY	0x07
+#define RTQ6752_REG_PAVDDSSTIME	0x08
+#define RTQ6752_REG_NAVDDONDLY	0x0D
+#define RTQ6752_REG_NAVDDSSTIME	0x0E
+#define RTQ6752_REG_OPTION1	0x12
+#define RTQ6752_REG_CHSWITCH	0x16
+#define RTQ6752_REG_FAULT	0x1D
+
+#define RTQ6752_VOUT_MASK	GENMASK(5, 0)
+#define RTQ6752_NAVDDEN_MASK	BIT(3)
+#define RTQ6752_PAVDDEN_MASK	BIT(0)
+#define RTQ6752_PAVDDAD_MASK	BIT(4)
+#define RTQ6752_NAVDDAD_MASK	BIT(3)
+#define RTQ6752_PAVDDF_MASK	BIT(3)
+#define RTQ6752_NAVDDF_MASK	BIT(0)
+#define RTQ6752_ENABLE_MASK	(BIT(RTQ6752_IDX_MAX) - 1)
+
+#define RTQ6752_VOUT_MINUV	5000000
+#define RTQ6752_VOUT_STEPUV	50000
+#define RTQ6752_VOUT_NUM	47
+#define RTQ6752_I2CRDY_TIMEUS	1000
+#define RTQ6752_MINSS_TIMEUS	5000
+
+struct rtq6752_priv {
+	struct regmap *regmap;
+	struct gpio_desc *enable_gpio;
+	struct mutex lock;
+	unsigned char enable_flag;
+};
+
+static int rtq6752_set_vdd_enable(struct regulator_dev *rdev)
+{
+	struct rtq6752_priv *priv = rdev_get_drvdata(rdev);
+	int rid = rdev_get_id(rdev), ret;
+
+	mutex_lock(&priv->lock);
+	if (priv->enable_gpio) {
+		gpiod_set_value(priv->enable_gpio, 1);
+
+		usleep_range(RTQ6752_I2CRDY_TIMEUS,
+			     RTQ6752_I2CRDY_TIMEUS + 100);
+	}
+
+	if (!priv->enable_flag) {
+		regcache_cache_only(priv->regmap, false);
+		ret = regcache_sync(priv->regmap);
+		if (ret) {
+			mutex_unlock(&priv->lock);
+			return ret;
+		}
+	}
+
+	priv->enable_flag |= BIT(rid);
+	mutex_unlock(&priv->lock);
+
+	return regulator_enable_regmap(rdev);
+}
+
+static int rtq6752_set_vdd_disable(struct regulator_dev *rdev)
+{
+	struct rtq6752_priv *priv = rdev_get_drvdata(rdev);
+	int rid = rdev_get_id(rdev), ret;
+
+	ret = regulator_disable_regmap(rdev);
+	if (ret)
+		return ret;
+
+	mutex_lock(&priv->lock);
+	priv->enable_flag &= ~BIT(rid);
+
+	if (!priv->enable_flag) {
+		regcache_cache_only(priv->regmap, true);
+		regcache_mark_dirty(priv->regmap);
+	}
+
+	if (priv->enable_gpio)
+		gpiod_set_value(priv->enable_gpio, 0);
+
+	mutex_unlock(&priv->lock);
+
+	return 0;
+}
+
+static int rtq6752_get_error_flags(struct regulator_dev *rdev,
+				   unsigned int *flags)
+{
+	unsigned int val, events = 0;
+	const unsigned int fault_mask[] = {
+		RTQ6752_PAVDDF_MASK, RTQ6752_NAVDDF_MASK };
+	int rid = rdev_get_id(rdev), ret;
+
+	ret = regmap_read(rdev->regmap, RTQ6752_REG_FAULT, &val);
+	if (ret)
+		return ret;
+
+	if (val & fault_mask[rid])
+		events = REGULATOR_ERROR_REGULATION_OUT;
+
+	*flags = events;
+	return 0;
+}
+
+static const struct regulator_ops rtq6752_regulator_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.enable = rtq6752_set_vdd_enable,
+	.disable = rtq6752_set_vdd_disable,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_active_discharge = regulator_set_active_discharge_regmap,
+	.get_error_flags = rtq6752_get_error_flags,
+};
+
+static const struct regulator_desc rtq6752_regulator_descs[] = {
+	{
+		.name = "rtq6752-pavdd",
+		.of_match = of_match_ptr("pavdd"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = RTQ6752_IDX_PAVDD,
+		.n_voltages = RTQ6752_VOUT_NUM,
+		.ops = &rtq6752_regulator_ops,
+		.owner = THIS_MODULE,
+		.min_uV = RTQ6752_VOUT_MINUV,
+		.uV_step = RTQ6752_VOUT_STEPUV,
+		.enable_time = RTQ6752_MINSS_TIMEUS,
+		.vsel_reg = RTQ6752_REG_PAVDD,
+		.vsel_mask = RTQ6752_VOUT_MASK,
+		.enable_reg = RTQ6752_REG_CHSWITCH,
+		.enable_mask = RTQ6752_PAVDDEN_MASK,
+		.active_discharge_reg = RTQ6752_REG_OPTION1,
+		.active_discharge_mask = RTQ6752_PAVDDAD_MASK,
+		.active_discharge_off = RTQ6752_PAVDDAD_MASK,
+	},
+	{
+		.name = "rtq6752-navdd",
+		.of_match = of_match_ptr("navdd"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = RTQ6752_IDX_NAVDD,
+		.n_voltages = RTQ6752_VOUT_NUM,
+		.ops = &rtq6752_regulator_ops,
+		.owner = THIS_MODULE,
+		.min_uV = RTQ6752_VOUT_MINUV,
+		.uV_step = RTQ6752_VOUT_STEPUV,
+		.enable_time = RTQ6752_MINSS_TIMEUS,
+		.vsel_reg = RTQ6752_REG_NAVDD,
+		.vsel_mask = RTQ6752_VOUT_MASK,
+		.enable_reg = RTQ6752_REG_CHSWITCH,
+		.enable_mask = RTQ6752_NAVDDEN_MASK,
+		.active_discharge_reg = RTQ6752_REG_OPTION1,
+		.active_discharge_mask = RTQ6752_NAVDDAD_MASK,
+		.active_discharge_off = RTQ6752_NAVDDAD_MASK,
+	}
+};
+
+static int rtq6752_init_device_properties(struct rtq6752_priv *priv)
+{
+	u8 raw_vals[] = { 0, 0 };
+	int ret;
+
+	/* Configure PAVDD on and softstart delay time to the minimum */
+	ret = regmap_raw_write(priv->regmap, RTQ6752_REG_PAVDDONDLY, raw_vals,
+			       ARRAY_SIZE(raw_vals));
+	if (ret)
+		return ret;
+
+	/* Configure NAVDD on and softstart delay time to the minimum */
+	return regmap_raw_write(priv->regmap, RTQ6752_REG_NAVDDONDLY, raw_vals,
+				ARRAY_SIZE(raw_vals));
+}
+
+static bool rtq6752_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	if (reg == RTQ6752_REG_FAULT)
+		return true;
+	return false;
+}
+
+static const struct reg_default rtq6752_reg_defaults[] = {
+	{ RTQ6752_REG_PAVDD, 0x14 },
+	{ RTQ6752_REG_NAVDD, 0x14 },
+	{ RTQ6752_REG_PAVDDONDLY, 0x01 },
+	{ RTQ6752_REG_PAVDDSSTIME, 0x01 },
+	{ RTQ6752_REG_NAVDDONDLY, 0x01 },
+	{ RTQ6752_REG_NAVDDSSTIME, 0x01 },
+	{ RTQ6752_REG_OPTION1, 0x07 },
+	{ RTQ6752_REG_CHSWITCH, 0x29 },
+};
+
+static const struct regmap_config rtq6752_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.cache_type = REGCACHE_RBTREE,
+	.max_register = RTQ6752_REG_FAULT,
+	.reg_defaults = rtq6752_reg_defaults,
+	.num_reg_defaults = ARRAY_SIZE(rtq6752_reg_defaults),
+	.volatile_reg = rtq6752_is_volatile_reg,
+};
+
+static int rtq6752_probe(struct i2c_client *i2c)
+{
+	struct rtq6752_priv *priv;
+	struct regulator_config reg_cfg = {};
+	struct regulator_dev *rdev;
+	int i, ret;
+
+	priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	mutex_init(&priv->lock);
+
+	priv->enable_gpio = devm_gpiod_get_optional(&i2c->dev, "enable",
+						    GPIOD_OUT_HIGH);
+	if (IS_ERR(priv->enable_gpio)) {
+		dev_err(&i2c->dev, "Failed to get 'enable' gpio\n");
+		return PTR_ERR(priv->enable_gpio);
+	}
+
+	usleep_range(RTQ6752_I2CRDY_TIMEUS, RTQ6752_I2CRDY_TIMEUS + 100);
+	/* Default EN pin to high, PAVDD and NAVDD will be on */
+	priv->enable_flag = RTQ6752_ENABLE_MASK;
+
+	priv->regmap = devm_regmap_init_i2c(i2c, &rtq6752_regmap_config);
+	if (IS_ERR(priv->regmap)) {
+		dev_err(&i2c->dev, "Failed to init regmap\n");
+		return PTR_ERR(priv->regmap);
+	}
+
+	ret = rtq6752_init_device_properties(priv);
+	if (ret) {
+		dev_err(&i2c->dev, "Failed to init device properties\n");
+		return ret;
+	}
+
+	reg_cfg.dev = &i2c->dev;
+	reg_cfg.regmap = priv->regmap;
+	reg_cfg.driver_data = priv;
+
+	for (i = 0; i < ARRAY_SIZE(rtq6752_regulator_descs); i++) {
+		rdev = devm_regulator_register(&i2c->dev,
+					       rtq6752_regulator_descs + i,
+					       &reg_cfg);
+		if (IS_ERR(rdev)) {
+			dev_err(&i2c->dev, "Failed to init %d regulator\n", i);
+			return PTR_ERR(rdev);
+		}
+	}
+
+	return 0;
+}
+
+static const struct of_device_id __maybe_unused rtq6752_device_table[] = {
+	{ .compatible = "richtek,rtq6752", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, rtq6752_device_table);
+
+static struct i2c_driver rtq6752_driver = {
+	.driver = {
+		.name = "rtq6752",
+		.of_match_table = rtq6752_device_table,
+	},
+	.probe_new = rtq6752_probe,
+};
+module_i2c_driver(rtq6752_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
+MODULE_DESCRIPTION("Richtek RTQ6752 Regulator Driver");
+MODULE_LICENSE("GPL v2");

drivers/regulator/sy7636a-regulator.c

@@ -13,7 +13,10 @@
 #include <linux/gpio/consumer.h>
 #include <linux/mfd/sy7636a.h>
 
-#define SY7636A_POLL_ENABLED_TIME 500
+struct sy7636a_data {
+	struct regmap *regmap;
+	struct gpio_desc *pgood_gpio;
+};
 
 static int sy7636a_get_vcom_voltage_op(struct regulator_dev *rdev)
 {
@@ -35,10 +38,10 @@ static int sy7636a_get_vcom_voltage_op(struct regulator_dev *rdev)
 
 static int sy7636a_get_status(struct regulator_dev *rdev)
 {
-	struct sy7636a *sy7636a = rdev_get_drvdata(rdev);
+	struct sy7636a_data *data = dev_get_drvdata(rdev->dev.parent);
 	int ret = 0;
 
-	ret = gpiod_get_value_cansleep(sy7636a->pgood_gpio);
+	ret = gpiod_get_value_cansleep(data->pgood_gpio);
 	if (ret < 0)
 		dev_err(&rdev->dev, "Failed to read pgood gpio: %d\n", ret);
 
@@ -61,46 +64,50 @@ static const struct regulator_desc desc = {
 	.owner = THIS_MODULE,
 	.enable_reg = SY7636A_REG_OPERATION_MODE_CRL,
 	.enable_mask = SY7636A_OPERATION_MODE_CRL_ONOFF,
-	.poll_enabled_time = SY7636A_POLL_ENABLED_TIME,
 	.regulators_node = of_match_ptr("regulators"),
 	.of_match = of_match_ptr("vcom"),
 };
 
 static int sy7636a_regulator_probe(struct platform_device *pdev)
 {
-	struct sy7636a *sy7636a = dev_get_drvdata(pdev->dev.parent);
+	struct regmap *regmap = dev_get_drvdata(pdev->dev.parent);
 	struct regulator_config config = { };
 	struct regulator_dev *rdev;
 	struct gpio_desc *gdp;
+	struct sy7636a_data *data;
 	int ret;
 
-	if (!sy7636a)
+	if (!regmap)
 		return -EPROBE_DEFER;
 
-	platform_set_drvdata(pdev, sy7636a);
-
-	gdp = devm_gpiod_get(sy7636a->dev, "epd-pwr-good", GPIOD_IN);
+	gdp = devm_gpiod_get(pdev->dev.parent, "epd-pwr-good", GPIOD_IN);
 	if (IS_ERR(gdp)) {
-		dev_err(sy7636a->dev, "Power good GPIO fault %ld\n", PTR_ERR(gdp));
+		dev_err(pdev->dev.parent, "Power good GPIO fault %ld\n", PTR_ERR(gdp));
 		return PTR_ERR(gdp);
 	}
 
-	sy7636a->pgood_gpio = gdp;
+	data = devm_kzalloc(&pdev->dev, sizeof(struct sy7636a_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->regmap = regmap;
+	data->pgood_gpio = gdp;
+
+	platform_set_drvdata(pdev, data);
 
-	ret = regmap_write(sy7636a->regmap, SY7636A_REG_POWER_ON_DELAY_TIME, 0x0);
+	ret = regmap_write(regmap, SY7636A_REG_POWER_ON_DELAY_TIME, 0x0);
 	if (ret) {
-		dev_err(sy7636a->dev, "Failed to initialize regulator: %d\n", ret);
+		dev_err(pdev->dev.parent, "Failed to initialize regulator: %d\n", ret);
 		return ret;
 	}
 
 	config.dev = &pdev->dev;
-	config.dev->of_node = sy7636a->dev->of_node;
-	config.driver_data = sy7636a;
-	config.regmap = sy7636a->regmap;
+	config.dev->of_node = pdev->dev.parent->of_node;
+	config.regmap = regmap;
 
 	rdev = devm_regulator_register(&pdev->dev, &desc, &config);
 	if (IS_ERR(rdev)) {
-		dev_err(sy7636a->dev, "Failed to register %s regulator\n",
+		dev_err(pdev->dev.parent, "Failed to register %s regulator\n",
 			pdev->name);
 		return PTR_ERR(rdev);
 	}

drivers/regulator/sy8824x.c

@@ -25,6 +25,7 @@ struct sy8824_config {
 	unsigned int vsel_min;
 	unsigned int vsel_step;
 	unsigned int vsel_count;
+	const struct regmap_config *config;
 };
 
 struct sy8824_device_info {
@@ -110,6 +111,15 @@ static int sy8824_regulator_register(struct sy8824_device_info *di,
 static const struct regmap_config sy8824_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
+	.num_reg_defaults_raw = 1,
+	.cache_type = REGCACHE_FLAT,
+};
+
+static const struct regmap_config sy20276_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.num_reg_defaults_raw = 2,
+	.cache_type = REGCACHE_FLAT,
 };
 
 static int sy8824_i2c_probe(struct i2c_client *client)
@@ -134,7 +144,7 @@ static int sy8824_i2c_probe(struct i2c_client *client)
 	di->dev = dev;
 	di->cfg = of_device_get_match_data(dev);
 
-	regmap = devm_regmap_init_i2c(client, &sy8824_regmap_config);
+	regmap = devm_regmap_init_i2c(client, di->cfg->config);
 	if (IS_ERR(regmap)) {
 		dev_err(dev, "Failed to allocate regmap!\n");
 		return PTR_ERR(regmap);
@@ -160,6 +170,7 @@ static const struct sy8824_config sy8824c_cfg = {
 	.vsel_min = 762500,
 	.vsel_step = 12500,
 	.vsel_count = 64,
+	.config = &sy8824_regmap_config,
 };
 
 static const struct sy8824_config sy8824e_cfg = {
@@ -169,6 +180,7 @@ static const struct sy8824_config sy8824e_cfg = {
 	.vsel_min = 700000,
 	.vsel_step = 12500,
 	.vsel_count = 64,
+	.config = &sy8824_regmap_config,
 };
 
 static const struct sy8824_config sy20276_cfg = {
@@ -178,6 +190,7 @@ static const struct sy8824_config sy20276_cfg = {
 	.vsel_min = 600000,
 	.vsel_step = 10000,
 	.vsel_count = 128,
+	.config = &sy20276_regmap_config,
 };
 
 static const struct sy8824_config sy20278_cfg = {
@@ -187,6 +200,7 @@ static const struct sy8824_config sy20278_cfg = {
 	.vsel_min = 762500,
 	.vsel_step = 12500,
 	.vsel_count = 64,
+	.config = &sy20276_regmap_config,
 };
 
 static const struct of_device_id sy8824_dt_ids[] = {

drivers/regulator/sy8827n.c

@@ -19,6 +19,10 @@
 #define   SY8827N_MODE		(1 << 6)
 #define SY8827N_VSEL1		1
 #define SY8827N_CTRL		2
+#define SY8827N_ID1		3
+#define SY8827N_ID2		4
+#define SY8827N_PGOOD		5
+#define SY8827N_MAX		(SY8827N_PGOOD + 1)
 
 #define SY8827N_NVOLTAGES	64
 #define SY8827N_VSELMIN		600000
@@ -102,9 +106,19 @@ static int sy8827n_regulator_register(struct sy8827n_device_info *di,
 	return PTR_ERR_OR_ZERO(rdev);
 }
 
+static bool sy8827n_volatile_reg(struct device *dev, unsigned int reg)
+{
+	if (reg == SY8827N_PGOOD)
+		return true;
+	return false;
+}
+
 static const struct regmap_config sy8827n_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
+	.volatile_reg = sy8827n_volatile_reg,
+	.num_reg_defaults_raw = SY8827N_MAX,
+	.cache_type = REGCACHE_FLAT,
 };
 
 static int sy8827n_i2c_probe(struct i2c_client *client)

drivers/regulator/tps65910-regulator.c

@@ -1211,12 +1211,10 @@ static int tps65910_probe(struct platform_device *pdev)
 
 		rdev = devm_regulator_register(&pdev->dev, &pmic->desc[i],
 					       &config);
-		if (IS_ERR(rdev)) {
-			dev_err(tps65910->dev,
+		if (IS_ERR(rdev))
+			return dev_err_probe(tps65910->dev, PTR_ERR(rdev),
 					     "failed to register %s regulator\n",
 					     pdev->name);
-			return PTR_ERR(rdev);
-		}
 
 		/* Save regulator for cleanup */
 		pmic->rdev[i] = rdev;

drivers/regulator/vctrl-regulator.c

@@ -37,7 +37,6 @@ struct vctrl_voltage_table {
 struct vctrl_data {
 	struct regulator_dev *rdev;
 	struct regulator_desc desc;
-	struct regulator *ctrl_reg;
 	bool enabled;
 	unsigned int min_slew_down_rate;
 	unsigned int ovp_threshold;
@@ -82,7 +81,12 @@ static int vctrl_calc_output_voltage(struct vctrl_data *vctrl, int ctrl_uV)
 static int vctrl_get_voltage(struct regulator_dev *rdev)
 {
 	struct vctrl_data *vctrl = rdev_get_drvdata(rdev);
-	int ctrl_uV = regulator_get_voltage_rdev(vctrl->ctrl_reg->rdev);
+	int ctrl_uV;
+
+	if (!rdev->supply)
+		return -EPROBE_DEFER;
+
+	ctrl_uV = regulator_get_voltage_rdev(rdev->supply->rdev);
 
 	return vctrl_calc_output_voltage(vctrl, ctrl_uV);
 }
@@ -92,14 +96,19 @@ static int vctrl_set_voltage(struct regulator_dev *rdev,
 			     unsigned int *selector)
 {
 	struct vctrl_data *vctrl = rdev_get_drvdata(rdev);
-	struct regulator *ctrl_reg = vctrl->ctrl_reg;
-	int orig_ctrl_uV = regulator_get_voltage_rdev(ctrl_reg->rdev);
-	int uV = vctrl_calc_output_voltage(vctrl, orig_ctrl_uV);
+	int orig_ctrl_uV;
+	int uV;
 	int ret;
 
+	if (!rdev->supply)
+		return -EPROBE_DEFER;
+
+	orig_ctrl_uV = regulator_get_voltage_rdev(rdev->supply->rdev);
+	uV = vctrl_calc_output_voltage(vctrl, orig_ctrl_uV);
+
 	if (req_min_uV >= uV || !vctrl->ovp_threshold)
 		/* voltage rising or no OVP */
-		return regulator_set_voltage_rdev(ctrl_reg->rdev,
+		return regulator_set_voltage_rdev(rdev->supply->rdev,
 			vctrl_calc_ctrl_voltage(vctrl, req_min_uV),
 			vctrl_calc_ctrl_voltage(vctrl, req_max_uV),
 			PM_SUSPEND_ON);
@@ -117,7 +126,7 @@ static int vctrl_set_voltage(struct regulator_dev *rdev,
 		next_uV = max_t(int, req_min_uV, uV - max_drop_uV);
 		next_ctrl_uV = vctrl_calc_ctrl_voltage(vctrl, next_uV);
 
-		ret = regulator_set_voltage_rdev(ctrl_reg->rdev,
+		ret = regulator_set_voltage_rdev(rdev->supply->rdev,
 					    next_ctrl_uV,
 					    next_ctrl_uV,
 					    PM_SUSPEND_ON);
@@ -134,7 +143,7 @@ static int vctrl_set_voltage(struct regulator_dev *rdev,
 
 err:
 	/* Try to go back to original voltage */
-	regulator_set_voltage_rdev(ctrl_reg->rdev, orig_ctrl_uV, orig_ctrl_uV,
+	regulator_set_voltage_rdev(rdev->supply->rdev, orig_ctrl_uV, orig_ctrl_uV,
 				   PM_SUSPEND_ON);
 
 	return ret;
@@ -151,16 +160,18 @@ static int vctrl_set_voltage_sel(struct regulator_dev *rdev,
 				 unsigned int selector)
 {
 	struct vctrl_data *vctrl = rdev_get_drvdata(rdev);
-	struct regulator *ctrl_reg = vctrl->ctrl_reg;
 	unsigned int orig_sel = vctrl->sel;
 	int ret;
 
+	if (!rdev->supply)
+		return -EPROBE_DEFER;
+
 	if (selector >= rdev->desc->n_voltages)
 		return -EINVAL;
 
 	if (selector >= vctrl->sel || !vctrl->ovp_threshold) {
 		/* voltage rising or no OVP */
-		ret = regulator_set_voltage_rdev(ctrl_reg->rdev,
+		ret = regulator_set_voltage_rdev(rdev->supply->rdev,
 					    vctrl->vtable[selector].ctrl,
 					    vctrl->vtable[selector].ctrl,
 					    PM_SUSPEND_ON);
@@ -179,7 +190,7 @@ static int vctrl_set_voltage_sel(struct regulator_dev *rdev,
 		else
 			next_sel = vctrl->vtable[vctrl->sel].ovp_min_sel;
 
-		ret = regulator_set_voltage_rdev(ctrl_reg->rdev,
+		ret = regulator_set_voltage_rdev(rdev->supply->rdev,
 					    vctrl->vtable[next_sel].ctrl,
 					    vctrl->vtable[next_sel].ctrl,
 					    PM_SUSPEND_ON);
@@ -202,7 +213,7 @@ static int vctrl_set_voltage_sel(struct regulator_dev *rdev,
 err:
 	if (vctrl->sel != orig_sel) {
 		/* Try to go back to original voltage */
-		if (!regulator_set_voltage_rdev(ctrl_reg->rdev,
+		if (!regulator_set_voltage_rdev(rdev->supply->rdev,
 					   vctrl->vtable[orig_sel].ctrl,
 					   vctrl->vtable[orig_sel].ctrl,
 					   PM_SUSPEND_ON))
@@ -234,10 +245,6 @@ static int vctrl_parse_dt(struct platform_device *pdev,
 	u32 pval;
 	u32 vrange_ctrl[2];
 
-	vctrl->ctrl_reg = devm_regulator_get(&pdev->dev, "ctrl");
-	if (IS_ERR(vctrl->ctrl_reg))
-		return PTR_ERR(vctrl->ctrl_reg);
-
 	ret = of_property_read_u32(np, "ovp-threshold-percent", &pval);
 	if (!ret) {
 		vctrl->ovp_threshold = pval;
@@ -315,11 +322,11 @@ static int vctrl_cmp_ctrl_uV(const void *a, const void *b)
 	return at->ctrl - bt->ctrl;
 }
 
-static int vctrl_init_vtable(struct platform_device *pdev)
+static int vctrl_init_vtable(struct platform_device *pdev,
+			     struct regulator *ctrl_reg)
 {
 	struct vctrl_data *vctrl = platform_get_drvdata(pdev);
 	struct regulator_desc *rdesc = &vctrl->desc;
-	struct regulator *ctrl_reg = vctrl->ctrl_reg;
 	struct vctrl_voltage_range *vrange_ctrl = &vctrl->vrange.ctrl;
 	int n_voltages;
 	int ctrl_uV;
@@ -395,23 +402,19 @@ static int vctrl_init_vtable(struct platform_device *pdev)
 static int vctrl_enable(struct regulator_dev *rdev)
 {
 	struct vctrl_data *vctrl = rdev_get_drvdata(rdev);
-	int ret = regulator_enable(vctrl->ctrl_reg);
 
-	if (!ret)
 	vctrl->enabled = true;
 
-	return ret;
+	return 0;
 }
 
 static int vctrl_disable(struct regulator_dev *rdev)
 {
 	struct vctrl_data *vctrl = rdev_get_drvdata(rdev);
-	int ret = regulator_disable(vctrl->ctrl_reg);
 
-	if (!ret)
 	vctrl->enabled = false;
 
-	return ret;
+	return 0;
 }
 
 static int vctrl_is_enabled(struct regulator_dev *rdev)
@@ -447,6 +450,7 @@ static int vctrl_probe(struct platform_device *pdev)
 	struct regulator_desc *rdesc;
 	struct regulator_config cfg = { };
 	struct vctrl_voltage_range *vrange_ctrl;
+	struct regulator *ctrl_reg;
 	int ctrl_uV;
 	int ret;
 
@@ -461,15 +465,20 @@ static int vctrl_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	ctrl_reg = devm_regulator_get(&pdev->dev, "ctrl");
+	if (IS_ERR(ctrl_reg))
+		return PTR_ERR(ctrl_reg);
+
 	vrange_ctrl = &vctrl->vrange.ctrl;
 
 	rdesc = &vctrl->desc;
 	rdesc->name = "vctrl";
 	rdesc->type = REGULATOR_VOLTAGE;
 	rdesc->owner = THIS_MODULE;
+	rdesc->supply_name = "ctrl";
 
-	if ((regulator_get_linear_step(vctrl->ctrl_reg) == 1) ||
-	    (regulator_count_voltages(vctrl->ctrl_reg) == -EINVAL)) {
+	if ((regulator_get_linear_step(ctrl_reg) == 1) ||
+	    (regulator_count_voltages(ctrl_reg) == -EINVAL)) {
 		rdesc->continuous_voltage_range = true;
 		rdesc->ops = &vctrl_ops_cont;
 	} else {
@@ -486,11 +495,12 @@ static int vctrl_probe(struct platform_device *pdev)
 	cfg.init_data = init_data;
 
 	if (!rdesc->continuous_voltage_range) {
-		ret = vctrl_init_vtable(pdev);
+		ret = vctrl_init_vtable(pdev, ctrl_reg);
 		if (ret)
 			return ret;
 
-		ctrl_uV = regulator_get_voltage_rdev(vctrl->ctrl_reg->rdev);
+		/* Use locked consumer API when not in regulator framework */
+		ctrl_uV = regulator_get_voltage(ctrl_reg);
 		if (ctrl_uV < 0) {
 			dev_err(&pdev->dev, "failed to get control voltage\n");
 			return ctrl_uV;
@@ -513,6 +523,9 @@ static int vctrl_probe(struct platform_device *pdev)
 		}
 	}
 
+	/* Drop ctrl-supply here in favor of regulator core managed supply */
+	devm_regulator_put(ctrl_reg);
+
 	vctrl->rdev = devm_regulator_register(&pdev->dev, rdesc, &cfg);
 	if (IS_ERR(vctrl->rdev)) {
 		ret = PTR_ERR(vctrl->rdev);

include/linux/mfd/rt5033-private.h

@@ -200,13 +200,13 @@ enum rt5033_reg {
 #define RT5033_REGULATOR_BUCK_VOLTAGE_MIN		1000000U
 #define RT5033_REGULATOR_BUCK_VOLTAGE_MAX		3000000U
 #define RT5033_REGULATOR_BUCK_VOLTAGE_STEP		100000U
-#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM		21
+#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM		32
 
 /* RT5033 regulator LDO output voltage uV */
 #define RT5033_REGULATOR_LDO_VOLTAGE_MIN		1200000U
 #define RT5033_REGULATOR_LDO_VOLTAGE_MAX		3000000U
 #define RT5033_REGULATOR_LDO_VOLTAGE_STEP		100000U
-#define RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM		19
+#define RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM		32
 
 /* RT5033 regulator SAFE LDO output voltage uV */
 #define RT5033_REGULATOR_SAFE_LDO_VOLTAGE		4900000U

include/linux/regulator/consumer.h

@@ -222,17 +222,12 @@ void regulator_bulk_unregister_supply_alias(struct device *dev,
 int devm_regulator_register_supply_alias(struct device *dev, const char *id,
 					 struct device *alias_dev,
 					 const char *alias_id);
-void devm_regulator_unregister_supply_alias(struct device *dev,
-					    const char *id);
 
 int devm_regulator_bulk_register_supply_alias(struct device *dev,
 					      const char *const *id,
 					      struct device *alias_dev,
 					      const char *const *alias_id,
 					      int num_id);
-void devm_regulator_bulk_unregister_supply_alias(struct device *dev,
-						 const char *const *id,
-						 int num_id);
 
 /* regulator output control and status */
 int __must_check regulator_enable(struct regulator *regulator);
@@ -408,11 +403,6 @@ static inline int devm_regulator_register_supply_alias(struct device *dev,
 	return 0;
 }
 
-static inline void devm_regulator_unregister_supply_alias(struct device *dev,
-							  const char *id)
-{
-}
-
 static inline int devm_regulator_bulk_register_supply_alias(struct device *dev,
 						const char *const *id,
 						struct device *alias_dev,
@@ -422,11 +412,6 @@ static inline int devm_regulator_bulk_register_supply_alias(struct device *dev,
 	return 0;
 }
 
-static inline void devm_regulator_bulk_unregister_supply_alias(
-	struct device *dev, const char *const *id, int num_id)
-{
-}
-
 static inline int regulator_enable(struct regulator *regulator)
 {
 	return 0;

include/linux/regulator/driver.h

@@ -337,6 +337,12 @@ enum regulator_type {
  * @pull_down_val_on: Enabling value for control when using regmap
  *                     set_pull_down
  *
+ * @ramp_reg:		Register for controlling the regulator ramp-rate.
+ * @ramp_mask:		Bitmask for the ramp-rate control register.
+ * @ramp_delay_table:	Table for mapping the regulator ramp-rate values. Values
+ *			should be given in units of V/S (uV/uS). See the
+ *			regulator_set_ramp_delay_regmap().
+ *
  * @enable_time: Time taken for initial enable of regulator (in uS).
  * @off_on_delay: guard time (in uS), before re-enabling a regulator
  *
@@ -462,7 +468,7 @@ struct regulator_err_state {
 };
 
 /**
- * struct regulator_irq_data - regulator error/notification status date
+ * struct regulator_irq_data - regulator error/notification status data
  *
  * @states:	Status structs for each of the associated regulators.
  * @num_states:	Amount of associated regulators.
@@ -521,8 +527,8 @@ struct regulator_irq_data {
  *		active events as core does not clean the map data.
  *		REGULATOR_FAILED_RETRY can be returned to indicate that the
  *		status reading from IC failed. If this is repeated for
- *		fatal_cnt times the core will call die() callback or BUG()
- *		as a last resort to protect the HW.
+ *		fatal_cnt times the core will call die() callback or power-off
+ *		the system as a last resort to protect the HW.
  * @renable:	Optional callback to check status (if HW supports that) before
  *		re-enabling IRQ. If implemented this should clear the error
  *		flags so that errors fetched by regulator_get_error_flags()
@@ -531,7 +537,8 @@ struct regulator_irq_data {
  *		REGULATOR_FAILED_RETRY can be returned to
  *		indicate that the status reading from IC failed. If this is
  *		repeated for 'fatal_cnt' times the core will call die()
- *		callback or BUG() as a last resort to protect the HW.
+ *		callback or if die() is not populated then attempt to power-off
+ *		the system as a last resort to protect the HW.
  *		Returning zero indicates that the problem in HW has been solved
  *		and IRQ will be re-enabled. Returning REGULATOR_ERROR_ON
  *		indicates the error condition is still active and keeps IRQ
@@ -645,7 +652,6 @@ devm_regulator_register(struct device *dev,
 			const struct regulator_desc *regulator_desc,
 			const struct regulator_config *config);
 void regulator_unregister(struct regulator_dev *rdev);
-void devm_regulator_unregister(struct device *dev, struct regulator_dev *rdev);
 
 int regulator_notifier_call_chain(struct regulator_dev *rdev,
 				  unsigned long event, void *data);

include/linux/regulator/machine.h

@@ -112,7 +112,7 @@ struct notification_limit {
  * @over_voltage_limits:	Limits for acting on over voltage.
  * @under_voltage_limits:	Limits for acting on under voltage.
  * @temp_limits:		Limits for acting on over temperature.
-
+ *
  * @max_spread: Max possible spread between coupled regulators
  * @max_uV_step: Max possible step change in voltage
  * @valid_modes_mask: Mask of modes which may be configured by consumers.