drm/amd/pm: add the fine grain tuning function for yellow carp

Use the pp_od_clk_voltage sysfs file to configure the min and max value
of gfx clock frequency or to restore the default values.

Command guide:
echo "s level value" > pp_od_clk_voltage
        "s" - set the sclk frequency
        "level" - 0 or 1, "0" represents the min value, "1" represents
        the max value
        "value" - the target value of sclk frequency, it should be
        limited in the safe range
echo "r" > pp_od_clk_voltage
        "r" - reset the sclk frequency, restore the default value
echo "c" > pp_od_clk_voltage
        "c" - commit the min and max value of sclk frequency to the
        system only after the commit command, the setting target values
        by "s" command will take effect

Example:
1) check the default sclk frequency
        $ cat pp_od_clk_voltage
        OD_SCLK:
        0:        200Mhz
        1:        600Mhz
        OD_RANGE:
        SCLK:     200MHz       600MHz
2) use "s" -- set command to configure the min or max sclk frequency
        $ echo "s 0 300" > pp_od_clk_voltage
        $ echo "s 1 500" > pp_od_clk_voltage
        $ echo "c" > pp_od_clk_voltage
        $ cat pp_od_clk_voltage
        OD_SCLK:
        0:        300Mhz
        1:        500Mhz
        OD_RANGE:
        SCLK:     200MHz       600MHz
3) use "r" -- reset command to restore the min and max sclk frequency
        $ echo "r" > pp_od_clk_voltage
        $ echo "c" > pp_od_clk_voltage
        $ cat pp_od_clk_voltage
        OD_SCLK:
        0:        200Mhz
        1:        600Mhz
        OD_RANGE:
        SCLK:     200MHz       600MHz

v2: modify the description of reset command usage - need to do "commit"
    after set the restore command
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c

@@ -382,6 +382,119 @@ static int yellow_carp_set_watermarks_table(struct smu_context *smu,
 	return 0;
 }
 
+static int yellow_carp_od_edit_dpm_table(struct smu_context *smu, enum PP_OD_DPM_TABLE_COMMAND type,
+					long input[], uint32_t size)
+{
+	int ret = 0;
+
+	switch (type) {
+	case PP_OD_EDIT_SCLK_VDDC_TABLE:
+		if (size != 2) {
+			dev_err(smu->adev->dev, "Input parameter number not correct\n");
+			return -EINVAL;
+		}
+
+		if (input[0] == 0) {
+			if (input[1] < smu->gfx_default_hard_min_freq) {
+				dev_warn(smu->adev->dev,
+					"Fine grain setting minimum sclk (%ld) MHz is less than the minimum allowed (%d) MHz\n",
+					input[1], smu->gfx_default_hard_min_freq);
+				return -EINVAL;
+			}
+			smu->gfx_actual_hard_min_freq = input[1];
+		} else if (input[0] == 1) {
+			if (input[1] > smu->gfx_default_soft_max_freq) {
+				dev_warn(smu->adev->dev,
+					"Fine grain setting maximum sclk (%ld) MHz is greater than the maximum allowed (%d) MHz\n",
+					input[1], smu->gfx_default_soft_max_freq);
+				return -EINVAL;
+			}
+			smu->gfx_actual_soft_max_freq = input[1];
+		} else {
+			return -EINVAL;
+		}
+		break;
+	case PP_OD_RESTORE_DEFAULT_TABLE:
+		if (size != 0) {
+			dev_err(smu->adev->dev, "Input parameter number not correct\n");
+			return -EINVAL;
+		} else {
+			smu->gfx_actual_hard_min_freq = smu->gfx_default_hard_min_freq;
+			smu->gfx_actual_soft_max_freq = smu->gfx_default_soft_max_freq;
+		}
+		break;
+	case PP_OD_COMMIT_DPM_TABLE:
+		if (size != 0) {
+			dev_err(smu->adev->dev, "Input parameter number not correct\n");
+			return -EINVAL;
+		} else {
+			if (smu->gfx_actual_hard_min_freq > smu->gfx_actual_soft_max_freq) {
+				dev_err(smu->adev->dev,
+					"The setting minimun sclk (%d) MHz is greater than the setting maximum sclk (%d) MHz\n",
+					smu->gfx_actual_hard_min_freq,
+					smu->gfx_actual_soft_max_freq);
+				return -EINVAL;
+			}
+
+			ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_SetHardMinGfxClk,
+									smu->gfx_actual_hard_min_freq, NULL);
+			if (ret) {
+				dev_err(smu->adev->dev, "Set hard min sclk failed!");
+				return ret;
+			}
+
+			ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_SetSoftMaxGfxClk,
+									smu->gfx_actual_soft_max_freq, NULL);
+			if (ret) {
+				dev_err(smu->adev->dev, "Set soft max sclk failed!");
+				return ret;
+			}
+		}
+		break;
+	default:
+		return -ENOSYS;
+	}
+
+	return ret;
+}
+
+static int yellow_carp_print_clk_levels(struct smu_context *smu,
+				enum smu_clk_type clk_type, char *buf)
+{
+	int size = 0;
+
+	switch (clk_type) {
+	case SMU_OD_SCLK:
+		size = sprintf(buf, "%s:\n", "OD_SCLK");
+		size += sprintf(buf + size, "0: %10uMhz\n",
+		(smu->gfx_actual_hard_min_freq > 0) ? smu->gfx_actual_hard_min_freq : smu->gfx_default_hard_min_freq);
+		size += sprintf(buf + size, "1: %10uMhz\n",
+		(smu->gfx_actual_soft_max_freq > 0) ? smu->gfx_actual_soft_max_freq : smu->gfx_default_soft_max_freq);
+		break;
+	case SMU_OD_RANGE:
+		size = sprintf(buf, "%s:\n", "OD_RANGE");
+		size += sprintf(buf + size, "SCLK: %7uMhz %10uMhz\n",
+						smu->gfx_default_hard_min_freq, smu->gfx_default_soft_max_freq);
+		break;
+	default:
+		break;
+	}
+
+	return size;
+}
+
+static int yellow_carp_set_fine_grain_gfx_freq_parameters(struct smu_context *smu)
+{
+	DpmClocks_t *clk_table = smu->smu_table.clocks_table;
+
+	smu->gfx_default_hard_min_freq = clk_table->MinGfxClk;
+	smu->gfx_default_soft_max_freq = clk_table->MaxGfxClk;
+	smu->gfx_actual_hard_min_freq = 0;
+	smu->gfx_actual_soft_max_freq = 0;
+
+	return 0;
+}
+
 static const struct pptable_funcs yellow_carp_ppt_funcs = {
 	.check_fw_status = smu_v13_0_1_check_fw_status,
 	.check_fw_version = smu_v13_0_1_check_fw_version,
@@ -400,6 +513,9 @@ static const struct pptable_funcs yellow_carp_ppt_funcs = {
 	.set_driver_table_location = smu_v13_0_1_set_driver_table_location,
 	.gfx_off_control = smu_v13_0_1_gfx_off_control,
 	.post_init = yellow_carp_post_smu_init,
+	.od_edit_dpm_table = yellow_carp_od_edit_dpm_table,
+	.print_clk_levels = yellow_carp_print_clk_levels,
+	.set_fine_grain_gfx_freq_parameters = yellow_carp_set_fine_grain_gfx_freq_parameters,
 };
 
 void yellow_carp_set_ppt_funcs(struct smu_context *smu)