Documentation: Fix typos

Fix typos in Documentation.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230814212822.193684-4-helgaas@kernel.orgSigned-off-by: Jonathan Corbet <corbet@lwn.net>

Documentation/admin-guide/kernel-parameters.txt

@@ -2624,7 +2624,7 @@
 
 	kvm-intel.flexpriority=
 			[KVM,Intel] Control KVM's use of FlexPriority feature
-			(TPR shadow). Default is 1 (enabled). Disalbe by KVM if
+			(TPR shadow). Default is 1 (enabled). Disable by KVM if
 			hardware lacks support for it.
 
 	kvm-intel.nested=

Documentation/admin-guide/mm/damon/usage.rst

@@ -99,7 +99,7 @@ Root
 
 The root of the DAMON sysfs interface is ``<sysfs>/kernel/mm/damon/``, and it
 has one directory named ``admin``.  The directory contains the files for
-privileged user space programs' control of DAMON.  User space tools or deamons
+privileged user space programs' control of DAMON.  User space tools or daemons
 having the root permission could use this directory.
 
 kdamonds/
@@ -397,7 +397,7 @@ be used for online analysis or tuning of the schemes.
 The statistics can be retrieved by reading the files under ``stats`` directory
 (``nr_tried``, ``sz_tried``, ``nr_applied``, ``sz_applied``, and
 ``qt_exceeds``), respectively.  The files are not updated in real time, so you
-should ask DAMON sysfs interface to updte the content of the files for the
+should ask DAMON sysfs interface to update the content of the files for the
 stats by writing a special keyword, ``update_schemes_stats`` to the relevant
 ``kdamonds/<N>/state`` file.
 

Documentation/admin-guide/module-signing.rst

@@ -266,7 +266,7 @@ for which it has a public key.   Otherwise, it will also load modules that are
 unsigned.   Any module for which the kernel has a key, but which proves to have
 a signature mismatch will not be permitted to load.
 
-Any module that has an unparseable signature will be rejected.
+Any module that has an unparsable signature will be rejected.
 
 
 =========================================

Documentation/arch/arm/arm.rst

@@ -141,7 +141,7 @@ ST506 hard drives
   `*configure` harddrive set to 2). I've got an internal 20MB and a great
   big external 5.25" FH 64MB drive (who could ever want more :-) ).
 
-  I've just got 240K/s off it (a dd with bs=128k); thats about half of what
+  I've just got 240K/s off it (a dd with bs=128k); that's about half of what
   RiscOS gets; but it's a heck of a lot better than the 50K/s I was getting
   last week :-)
 

Documentation/arch/arm/ixp4xx.rst

@@ -78,9 +78,9 @@ IXP4xx provides two methods of accessing PCI memory space:
 1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
    To access PCI via this space, we simply ioremap() the BAR
    into the kernel and we can use the standard read[bwl]/write[bwl]
-   macros. This is the preffered method due to speed but it
+   macros. This is the preferred method due to speed but it
    limits the system to just 64MB of PCI memory. This can be
-   problamatic if using video cards and other memory-heavy devices.
+   problematic if using video cards and other memory-heavy devices.
 
 2) If > 64MB of memory space is required, the IXP4xx can be
    configured to use indirect registers to access PCI This allows

Documentation/arch/arm/sunxi/clocks.rst

@@ -5,7 +5,7 @@ Frequently asked questions about the sunxi clock system
 This document contains useful bits of information that people tend to ask
 about the sunxi clock system, as well as accompanying ASCII art when adequate.
 
-Q: Why is the main 24MHz oscillator gatable? Wouldn't that break the
+Q: Why is the main 24MHz oscillator gateable? Wouldn't that break the
    system?
 
 A: The 24MHz oscillator allows gating to save power. Indeed, if gated

Documentation/arch/arm/swp_emulation.rst

 Software emulation of deprecated SWP instruction (CONFIG_SWP_EMULATE)
 ---------------------------------------------------------------------
 
-ARMv6 architecture deprecates use of the SWP/SWPB instructions, and recommeds
+ARMv6 architecture deprecates use of the SWP/SWPB instructions, and recommends
 moving to the load-locked/store-conditional instructions LDREX and STREX.
 
 ARMv7 multiprocessing extensions introduce the ability to disable these

Documentation/arch/arm/tcm.rst

@@ -71,7 +71,7 @@ in <asm/tcm.h>. Using this interface it is possible to:
 
 - Have the remaining TCM RAM added to a special
   allocation pool with gen_pool_create() and gen_pool_add()
-  and provice tcm_alloc() and tcm_free() for this
+  and provide tcm_alloc() and tcm_free() for this
   memory. Such a heap is great for things like saving
   device state when shutting off device power domains.
 

Documentation/arch/arm/vlocks.rst

@@ -155,7 +155,7 @@ the basic algorithm:
    optimisation.
 
    If there are too many CPUs to read the currently_voting array in
-   one transaction then multiple transations are still required.  The
+   one transaction then multiple transactions are still required.  The
    implementation uses a simple loop of word-sized loads for this
    case.  The number of transactions is still fewer than would be
    required if bytes were loaded individually.

Documentation/arch/arm64/acpi_object_usage.rst

@@ -45,7 +45,7 @@ APMT   Signature Reserved (signature == "APMT")
 
        **Arm Performance Monitoring Table**
 
-       This table describes the properties of PMU support implmented by
+       This table describes the properties of PMU support implemented by
        components in the system.
 
 BERT   Section 18.3 (signature == "BERT")

Documentation/arch/arm64/arm-acpi.rst

@@ -99,7 +99,7 @@ to replace the kernel.
 
 When a Linux driver or subsystem is first implemented using ACPI, it by
 definition ends up requiring a specific version of the ACPI specification
--- it's baseline.  ACPI firmware must continue to work, even though it may
+-- its baseline.  ACPI firmware must continue to work, even though it may
 not be optimal, with the earliest kernel version that first provides support
 for that baseline version of ACPI.  There may be a need for additional drivers,
 but adding new functionality (e.g., CPU power management) should not break

Documentation/arch/openrisc/openrisc_port.rst

@@ -106,7 +106,7 @@ History
 	a much improved version with changes all around.
 
 10-04-2004	Matjaz Breskvar (phoenix@bsemi.com)
-	alot of bugfixes all over.
+	a lot of bugfixes all over.
 	ethernet support, functional http and telnet servers.
 	running many standard linux apps.
 
@@ -114,7 +114,7 @@ History
 	port to 2.6.x
 
 30-11-2004	Matjaz Breskvar (phoenix@bsemi.com)
-	lots of bugfixes and enhancments.
+	lots of bugfixes and enhancements.
 	added opencores framebuffer driver.
 
 09-10-2010    Jonas Bonn (jonas@southpole.se)

Documentation/arch/x86/boot.rst

@@ -1105,7 +1105,7 @@ The kernel command line should not be located below the real-mode
 code, nor should it be located in high memory.
 
 
-Sample Boot Configuartion
+Sample Boot Configuration
 =========================
 
 As a sample configuration, assume the following layout of the real

Documentation/arch/x86/buslock.rst

@@ -32,7 +32,7 @@ mechanisms to detect split locks and bus locks.
 --------------------------------------
 
 Beginning with the Tremont Atom CPU split lock operations may raise an
-Alignment Check (#AC) exception when a split lock operation is attemped.
+Alignment Check (#AC) exception when a split lock operation is attempted.
 
 #DB exception for bus lock detection
 ------------------------------------

Documentation/arch/x86/mds.rst

@@ -60,7 +60,7 @@ needed for exploiting MDS requires:
    data
 
 The existence of such a construct in the kernel cannot be excluded with
-100% certainty, but the complexity involved makes it extremly unlikely.
+100% certainty, but the complexity involved makes it extremely unlikely.
 
 There is one exception, which is untrusted BPF. The functionality of
 untrusted BPF is limited, but it needs to be thoroughly investigated

Documentation/arch/x86/sgx.rst

@@ -245,7 +245,7 @@ SGX will likely become unusable because the memory available to SGX is
 limited. However, while this may be fatal to SGX, the rest of the kernel
 is unlikely to be impacted and should continue to work.
 
-As a result, when this happpens, user should stop running any new
+As a result, when this happens, user should stop running any new
 SGX workloads, (or just any new workloads), and migrate all valuable
 workloads. Although a machine reboot can recover all EPC memory, the bug
 should be reported to Linux developers.

Documentation/arch/xtensa/atomctl.rst

@@ -23,7 +23,7 @@ doing a Cached (WB) transaction and use the Memory RCW for un-cached
 operations.
 
 For systems without an coherent cache controller, non-MX, we always
-use the memory controllers RCW, thought non-MX controlers likely
+use the memory controllers RCW, though non-MX controllers likely
 support the Internal Operation.
 
 CUSTOMER-WARNING:

Documentation/block/data-integrity.rst

@@ -209,7 +209,7 @@ will require extra work due to the application tag.
       sector must be set, and the bio should have all data pages
       added.  It is up to the caller to ensure that the bio does not
       change while I/O is in progress.
-      Complete bio with error if prepare failed for some reson.
+      Complete bio with error if prepare failed for some reason.
 
 
 5.3 Passing Existing Integrity Metadata

Documentation/block/ublk.rst

@@ -238,7 +238,7 @@ The's IO is assigned by a unique tag, which is 1:1 mapping with IO
 request of ``/dev/ublkb*``.
 
 UAPI structure of ``ublksrv_io_desc`` is defined for describing each IO from
-the driver. A fixed mmaped area (array) on ``/dev/ublkc*`` is provided for
+the driver. A fixed mmapped area (array) on ``/dev/ublkc*`` is provided for
 exporting IO info to the server; such as IO offset, length, OP/flags and
 buffer address. Each ``ublksrv_io_desc`` instance can be indexed via queue id
 and IO tag directly.

Documentation/bpf/cpumasks.rst

@@ -364,7 +364,7 @@ can be used to query the contents of cpumasks.
 ----
 
 Some example usages of these querying kfuncs were shown above. We will not
-replicate those exmaples here. Note, however, that all of the aforementioned
+replicate those examples here. Note, however, that all of the aforementioned
 kfuncs are tested in `tools/testing/selftests/bpf/progs/cpumask_success.c`_, so
 please take a look there if you're looking for more examples of how they can be
 used.

Documentation/bpf/graph_ds_impl.rst

@@ -23,7 +23,7 @@ Introduction
 
 The BPF map API has historically been the main way to expose data structures
 of various types for use within BPF programs. Some data structures fit naturally
-with the map API (HASH, ARRAY), others less so. Consequentially, programs
+with the map API (HASH, ARRAY), others less so. Consequently, programs
 interacting with the latter group of data structures can be hard to parse
 for kernel programmers without previous BPF experience.
 

Documentation/fault-injection/fault-injection.rst

@@ -243,7 +243,7 @@ proc entries
 Error Injectable Functions
 --------------------------
 
-This part is for the kenrel developers considering to add a function to
+This part is for the kernel developers considering to add a function to
 ALLOW_ERROR_INJECTION() macro.
 
 Requirements for the Error Injectable Functions

Documentation/fb/deferred_io.rst

@@ -9,7 +9,7 @@ works:
 
 - userspace app like Xfbdev mmaps framebuffer
 - deferred IO and driver sets up fault and page_mkwrite handlers
-- userspace app tries to write to mmaped vaddress
+- userspace app tries to write to mmapped vaddress
 - we get pagefault and reach fault handler
 - fault handler finds and returns physical page
 - we get page_mkwrite where we add this page to a list

Documentation/fb/sm712fb.rst

@@ -31,5 +31,5 @@ Missing Features
 ================
 (alias TODO list)
 
-	* 2D acceleratrion
+	* 2D acceleration
 	* dual-head support

Documentation/fb/sstfb.rst

@@ -73,7 +73,7 @@ Module insertion
 	  the device will be /dev/fb0. You can check this by doing a
 	  cat /proc/fb. You can find a copy of con2fb in tools/ directory.
 	  if you don't have another fb device, this step is superfluous,
-	  as the console subsystem automagicaly binds ttys to the fb.
+	  as the console subsystem automagically binds ttys to the fb.
        #. switch to the virtual console you just mapped. "tadaaa" ...
 
 Module removal

Documentation/features/core/thread-info-in-task/arch-support.txt

 #
 # Feature name:          thread-info-in-task
 #         Kconfig:       THREAD_INFO_IN_TASK
-#         description:   arch makes use of the core kernel facility to embedd thread_info in task_struct
+#         description:   arch makes use of the core kernel facility to embed thread_info in task_struct
 #
     -----------------------
     |         arch |status|

Documentation/filesystems/9p.rst

@@ -79,7 +79,7 @@ Options
 
   cache=mode	specifies a caching policy.  By default, no caches are used.
 		The mode can be specified as a bitmask or by using one of the
-		prexisting common 'shortcuts'.
+		preexisting common 'shortcuts'.
 		The bitmask is described below: (unspecified bits are reserved)
 
 			==========  ====================================================

Documentation/filesystems/befs.rst

@@ -106,8 +106,8 @@ iocharset=xxx  Use xxx as the name of the NLS translation table.
 debug          The driver will output debugging information to the syslog.
 =============  ===========================================================
 
-How to Get Lastest Version
-==========================
+How to Get Latest Version
+=========================
 
 The latest version is currently available at:
 <http://befs-driver.sourceforge.net/>

Documentation/filesystems/caching/cachefiles.rst

@@ -416,7 +416,7 @@ process is the target of an operation by some other process (SIGKILL for
 example).
 
 The subjective security holds the active security properties of a process, and
-may be overridden.  This is not seen externally, and is used whan a process
+may be overridden.  This is not seen externally, and is used when a process
 acts upon another object, for example SIGKILLing another process or opening a
 file.
 

Documentation/filesystems/caching/netfs-api.rst

@@ -59,7 +59,7 @@ A filesystem would typically have a volume cookie for each superblock.
 
 The filesystem then acquires a cookie for each file within that volume using an
 object key.  Object keys are binary blobs and only need to be unique within
-their parent volume.  The cache backend is reponsible for rendering the binary
+their parent volume.  The cache backend is responsible for rendering the binary
 blob into something it can use and may employ hash tables, trees or whatever to
 improve its ability to find an object.  This is transparent to the network
 filesystem.
@@ -91,7 +91,7 @@ actually required and it can use the fscache I/O API directly.
 Volume Registration
 ===================
 
-The first step for a network filsystem is to acquire a volume cookie for the
+The first step for a network filesystem is to acquire a volume cookie for the
 volume it wants to access::
 
 	struct fscache_volume *
@@ -119,7 +119,7 @@ is provided.  If the coherency data doesn't match, the entire cache volume will
 be invalidated.
 
 This function can return errors such as EBUSY if the volume key is already in
-use by an acquired volume or ENOMEM if an allocation failure occured.  It may
+use by an acquired volume or ENOMEM if an allocation failure occurred.  It may
 also return a NULL volume cookie if fscache is not enabled.  It is safe to
 pass a NULL cookie to any function that takes a volume cookie.  This will
 cause that function to do nothing.

Documentation/filesystems/configfs.rst

@@ -253,7 +253,7 @@ to be used.
 If binary attribute is readable and the config_item provides a
 ct_item_ops->read_bin_attribute() method, that method will be called
 whenever userspace asks for a read(2) on the attribute.  The converse
-will happen for write(2). The reads/writes are bufferred so only a
+will happen for write(2). The reads/writes are buffered so only a
 single read/write will occur; the attributes' need not concern itself
 with it.
 

Documentation/filesystems/dax.rst

@@ -291,7 +291,7 @@ The DAX code does not work correctly on architectures which have virtually
 mapped caches such as ARM, MIPS and SPARC.
 
 Calling :c:func:`get_user_pages()` on a range of user memory that has been
-mmaped from a `DAX` file will fail when there are no 'struct page' to describe
+mmapped from a `DAX` file will fail when there are no 'struct page' to describe
 those pages.  This problem has been addressed in some device drivers
 by adding optional struct page support for pages under the control of
 the driver (see `CONFIG_NVDIMM_PFN` in ``drivers/nvdimm`` for an example of

Documentation/filesystems/devpts.rst

@@ -5,8 +5,8 @@ The Devpts Filesystem
 =====================
 
 Each mount of the devpts filesystem is now distinct such that ptys
-and their indicies allocated in one mount are independent from ptys
-and their indicies in all other mounts.
+and their indices allocated in one mount are independent from ptys
+and their indices in all other mounts.
 
 All mounts of the devpts filesystem now create a ``/dev/pts/ptmx`` node
 with permissions ``0000``.

Documentation/filesystems/ext4/super.rst

@@ -772,7 +772,7 @@ The ``s_default_mount_opts`` field is any combination of the following:
    * - 0x0010
      - Do not support 32-bit UIDs. (EXT4_DEFM_UID16)
    * - 0x0020
-     - All data and metadata are commited to the journal.
+     - All data and metadata are committed to the journal.
        (EXT4_DEFM_JMODE_DATA)
    * - 0x0040
      - All data are flushed to the disk before metadata are committed to the

Documentation/filesystems/f2fs.rst

@@ -359,7 +359,7 @@ errors=%s		 Specify f2fs behavior on critical errors. This supports modes:
 			 ====================== =============== =============== ========
 			 mode			continue	remount-ro	panic
 			 ====================== =============== =============== ========
-			 access ops		normal		noraml		N/A
+			 access ops		normal		normal		N/A
 			 syscall errors		-EIO		-EROFS		N/A
 			 mount option		rw		ro		N/A
 			 pending dir write	keep		keep		N/A
@@ -480,7 +480,7 @@ Note: please refer to the manpage of dump.f2fs(8) to get full option list.
 
 sload.f2fs
 ----------
-The sload.f2fs gives a way to insert files and directories in the exisiting disk
+The sload.f2fs gives a way to insert files and directories in the existing disk
 image. This tool is useful when building f2fs images given compiled files.
 
 Note: please refer to the manpage of sload.f2fs(8) to get full option list.
@@ -792,7 +792,7 @@ Allocating disk space
     as a method of optimally implementing that function.
 
 However, once F2FS receives ioctl(fd, F2FS_IOC_SET_PIN_FILE) in prior to
-fallocate(fd, DEFAULT_MODE), it allocates on-disk block addressess having
+fallocate(fd, DEFAULT_MODE), it allocates on-disk block addresses having
 zero or random data, which is useful to the below scenario where:
 
  1. create(fd)

Documentation/filesystems/gfs2-glocks.rst

@@ -78,7 +78,7 @@ The minimum hold time for each lock is the time after a remote lock
 grant for which we ignore remote demote requests. This is in order to
 prevent a situation where locks are being bounced around the cluster
 from node to node with none of the nodes making any progress. This
-tends to show up most with shared mmaped files which are being written
+tends to show up most with shared mmapped files which are being written
 to by multiple nodes. By delaying the demotion in response to a
 remote callback, that gives the userspace program time to make
 some progress before the pages are unmapped.

Documentation/filesystems/idmappings.rst

@@ -36,7 +36,7 @@ and write down the mappings it will generate::
 From a mathematical viewpoint ``U`` and ``K`` are well-ordered sets and an
 idmapping is an order isomorphism from ``U`` into ``K``. So ``U`` and ``K`` are
 order isomorphic. In fact, ``U`` and ``K`` are always well-ordered subsets of
-the set of all possible ids useable on a given system.
+the set of all possible ids usable on a given system.
 
 Looking at this mathematically briefly will help us highlight some properties
 that make it easier to understand how we can translate between idmappings. For
@@ -47,7 +47,7 @@ example, we know that the inverse idmapping is an order isomorphism as well::
  k10002 -> u24
 
 Given that we are dealing with order isomorphisms plus the fact that we're
-dealing with subsets we can embedd idmappings into each other, i.e. we can
+dealing with subsets we can embed idmappings into each other, i.e. we can
 sensibly translate between different idmappings. For example, assume we've been
 given the three idmappings::
 
@@ -60,7 +60,7 @@ and id ``k11000`` which has been generated by the first idmapping by mapping
 
 Because we're dealing with order isomorphic subsets it is meaningful to ask
 what id ``k11000`` corresponds to in the second or third idmapping. The
-straightfoward algorithm to use is to apply the inverse of the first idmapping,
+straightforward algorithm to use is to apply the inverse of the first idmapping,
 mapping ``k11000`` up to ``u1000``. Afterwards, we can map ``u1000`` down using
 either the second idmapping mapping or third idmapping mapping. The second
 idmapping would map ``u1000`` down to ``21000``. The third idmapping would map
@@ -367,7 +367,7 @@ So with the second step the kernel guarantees that a valid userspace id can be
 written to disk. If it can't the kernel will refuse the creation request to not
 even remotely risk filesystem corruption.
 
-The astute reader will have realized that this is simply a varation of the
+The astute reader will have realized that this is simply a variation of the
 crossmapping algorithm we mentioned above in a previous section. First, the
 kernel maps the caller's userspace id down into a kernel id according to the
 caller's idmapping and then maps that kernel id up according to the
@@ -458,7 +458,7 @@ the kernel id that was created in the caller's idmapping. This has mainly two
 consequences.
 
 First, that we can't allow a caller to ultimately write to disk with another
-userspace id. We could only do this if we were to mount the whole fileystem
+userspace id. We could only do this if we were to mount the whole filesystem
 with the caller's or another idmapping. But that solution is limited to a few
 filesystems and not very flexible. But this is a use-case that is pretty
 important in containerized workloads.
@@ -589,7 +589,7 @@ on their work machine.
 
 In both cases changing ownership recursively has grave implications. The most
 obvious one is that ownership is changed globally and permanently. In the home
-directory case this change in ownership would even need to happen everytime the
+directory case this change in ownership would even need to happen every time the
 user switches from their home to their work machine. For really large sets of
 files this becomes increasingly costly.
 
@@ -662,7 +662,7 @@ use the ``vfsuid_into_kuid()`` and ``vfsgid_into_kgid()`` helpers.
 To illustrate why this helper currently exists, consider what happens when we
 change ownership of an inode from an idmapped mount. After we generated
 a ``vfsuid_t`` or ``vfsgid_t`` based on the mount idmapping we later commit to
-this ``vfsuid_t`` or ``vfsgid_t`` to become the new filesytem wide ownership.
+this ``vfsuid_t`` or ``vfsgid_t`` to become the new filesystem wide ownership.
 Thus, we are turning the ``vfsuid_t`` or ``vfsgid_t`` into a global ``kuid_t``
 or ``kgid_t``. And this can be done by using ``vfsuid_into_kuid()`` and
 ``vfsgid_into_kgid()``.

Documentation/filesystems/netfs_library.rst

@@ -155,7 +155,7 @@ conflicting writes or track dirty data and needs to put the acquired folio if
 an error occurs after calling the helper.
 
 The helpers manage the read request, calling back into the network filesystem
-through the suppplied table of operations.  Waits will be performed as
+through the supplied table of operations.  Waits will be performed as
 necessary before returning for helpers that are meant to be synchronous.
 
 If an error occurs, the ->free_request() will be called to clean up the

Documentation/filesystems/nfs/client-identifier.rst

@@ -131,7 +131,7 @@ deployments, this construction is usually adequate. Often, however,
 the node name by itself is not adequately unique, and can change
 unexpectedly. Problematic situations include:
 
-  - NFS-root (diskless) clients, where the local DCHP server (or
+  - NFS-root (diskless) clients, where the local DHCP server (or
     equivalent) does not provide a unique host name.
 
   - "Containers" within a single Linux host.  If each container has

Documentation/filesystems/nfs/rpc-cache.rst

@@ -78,7 +78,7 @@ Creating a Cache
       include taking references to shared objects.
 
     void update(struct cache_head \*orig, struct cache_head \*new)
-      Set the 'content' fileds in 'new' from 'orig'.
+      Set the 'content' fields in 'new' from 'orig'.
 
     int cache_show(struct seq_file \*m, struct cache_detail \*cd, struct cache_head \*h)
       Optional.  Used to provide a /proc file that lists the

Documentation/filesystems/nfs/rpc-server-gss.rst

@@ -29,7 +29,7 @@ The Linux kernel, at the moment, supports only the KRB5 mechanism, and
 depends on GSSAPI extensions that are KRB5 specific.
 
 GSSAPI is a complex library, and implementing it completely in kernel is
-unwarranted. However GSSAPI operations are fundementally separable in 2
+unwarranted. However GSSAPI operations are fundamentally separable in 2
 parts:
 
 - initial context establishment

Documentation/filesystems/nilfs2.rst

@@ -231,7 +231,7 @@ file structures (nilfs_finfo), and per block structures (nilfs_binfo)::
 
 
 The logs include regular files, directory files, symbolic link files
-and several meta data files.  The mata data files are the files used
+and several meta data files.  The meta data files are the files used
 to maintain file system meta data.  The current version of NILFS2 uses
 the following meta data files::
 

Documentation/filesystems/ntfs3.rst

@@ -112,7 +112,7 @@ this table marked with no it means default is without **no**.
 Todo list
 =========
 - Full journaling support over JBD. Currently journal replaying is supported
-  which is not necessarily as effectice as JBD would be.
+  which is not necessarily as effective as JBD would be.
 
 References
 ==========

Documentation/filesystems/orangefs.rst

@@ -274,7 +274,7 @@ then contains:
     of kcalloced memory. This memory is used as an array of pointers
     to each of the pages in the IO buffer through a call to get_user_pages.
   * desc_array - a pointer to ``desc_count * (sizeof(struct orangefs_bufmap_desc))``
-    bytes of kcalloced memory. This memory is further intialized:
+    bytes of kcalloced memory. This memory is further initialized:
 
       user_desc is the kernel's copy of the IO buffer's ORANGEFS_dev_map_desc
       structure. user_desc->ptr points to the IO buffer.

Documentation/filesystems/overlayfs.rst

@@ -195,7 +195,7 @@ handle it in two different ways:
 
 1. return EXDEV error: this error is returned by rename(2) when trying to
    move a file or directory across filesystem boundaries.  Hence
-   applications are usually prepared to hande this error (mv(1) for example
+   applications are usually prepared to handle this error (mv(1) for example
    recursively copies the directory tree).  This is the default behavior.
 
 2. If the "redirect_dir" feature is enabled, then the directory will be
@@ -235,7 +235,7 @@ Mount options:
     Redirects are not created and not followed.
 - "redirect_dir=off":
     If "redirect_always_follow" is enabled in the kernel/module config,
-    this "off" traslates to "follow", otherwise it translates to "nofollow".
+    this "off" translates to "follow", otherwise it translates to "nofollow".
 
 When the NFS export feature is enabled, every copied up directory is
 indexed by the file handle of the lower inode and a file handle of the

Documentation/filesystems/porting.rst

@@ -177,7 +177,7 @@ settles down a bit.
 **mandatory**
 
 s_export_op is now required for exporting a filesystem.
-isofs, ext2, ext3, resierfs, fat
+isofs, ext2, ext3, reiserfs, fat
 can be used as examples of very different filesystems.
 
 ---
@@ -470,7 +470,7 @@ has been taken to VFS and filesystems need to provide a non-NULL
 **mandatory**
 
 If you implement your own ->llseek() you must handle SEEK_HOLE and
-SEEK_DATA.  You can hanle this by returning -EINVAL, but it would be nicer to
+SEEK_DATA.  You can handle this by returning -EINVAL, but it would be nicer to
 support it in some way.  The generic handler assumes that the entire file is
 data and there is a virtual hole at the end of the file.  So if the provided
 offset is less than i_size and SEEK_DATA is specified, return the same offset.
@@ -517,7 +517,7 @@ The witch is dead!  Well, 2/3 of it, anyway.  ->d_revalidate() and
 
 ->create() doesn't take ``struct nameidata *``; unlike the previous
 two, it gets "is it an O_EXCL or equivalent?" boolean argument.  Note that
-local filesystems can ignore tha argument - they are guaranteed that the
+local filesystems can ignore this argument - they are guaranteed that the
 object doesn't exist.  It's remote/distributed ones that might care...
 
 ---

Documentation/filesystems/proc.rst

@@ -507,12 +507,12 @@ pressure if the memory is clean. Please note that the printed value might
 be lower than the real value due to optimizations used in the current
 implementation. If this is not desirable please file a bug report.
 
-"AnonHugePages" shows the ammount of memory backed by transparent hugepage.
+"AnonHugePages" shows the amount of memory backed by transparent hugepage.
 
-"ShmemPmdMapped" shows the ammount of shared (shmem/tmpfs) memory backed by
+"ShmemPmdMapped" shows the amount of shared (shmem/tmpfs) memory backed by
 huge pages.
 
-"Shared_Hugetlb" and "Private_Hugetlb" show the ammounts of memory backed by
+"Shared_Hugetlb" and "Private_Hugetlb" show the amounts of memory backed by
 hugetlbfs page which is *not* counted in "RSS" or "PSS" field for historical
 reasons. And these are not included in {Shared,Private}_{Clean,Dirty} field.
 
@@ -561,7 +561,7 @@ encoded manner. The codes are the following:
     mm    mixed map area
     hg    huge page advise flag
     nh    no huge page advise flag
-    mg    mergable advise flag
+    mg    mergeable advise flag
     bt    arm64 BTI guarded page
     mt    arm64 MTE allocation tags are enabled
     um    userfaultfd missing tracking
@@ -1081,7 +1081,7 @@ Writeback
 AnonPages
               Non-file backed pages mapped into userspace page tables
 Mapped
-              files which have been mmaped, such as libraries
+              files which have been mmapped, such as libraries
 Shmem
               Total memory used by shared memory (shmem) and tmpfs
 KReclaimable
@@ -2229,7 +2229,7 @@ are not related to tasks.
 Chapter 5: Filesystem behavior
 ==============================
 
-Originally, before the advent of pid namepsace, procfs was a global file
+Originally, before the advent of pid namespace, procfs was a global file
 system. It means that there was only one procfs instance in the system.
 
 When pid namespace was added, a separate procfs instance was mounted in

Documentation/filesystems/qnx6.rst

@@ -135,7 +135,7 @@ inode.
 
 Character and block special devices do not exist in QNX as those files
 are handled by the QNX kernel/drivers and created in /dev independent of the
-underlaying filesystem.
+underlying filesystem.
 
 Long filenames
 --------------

Documentation/filesystems/seq_file.rst

@@ -130,7 +130,7 @@ called SEQ_START_TOKEN; it can be used if you wish to instruct your
 show() function (described below) to print a header at the top of the
 output. SEQ_START_TOKEN should only be used if the offset is zero,
 however.  SEQ_START_TOKEN has no special meaning to the core seq_file
-code.  It is provided as a convenience for a start() funciton to
+code.  It is provided as a convenience for a start() function to
 communicate with the next() and show() functions.
 
 The next function to implement is called, amazingly, next(); its job is to
@@ -217,7 +217,7 @@ between the calls to start() and stop(), so holding a lock during that time
 is a reasonable thing to do. The seq_file code will also avoid taking any
 other locks while the iterator is active.
 
-The iterater value returned by start() or next() is guaranteed to be
+The iterator value returned by start() or next() is guaranteed to be
 passed to a subsequent next() or stop() call.  This allows resources
 such as locks that were taken to be reliably released.  There is *no*
 guarantee that the iterator will be passed to show(), though in practice

Documentation/filesystems/ubifs-authentication.rst

@@ -130,7 +130,7 @@ marked as dirty are written to the flash to update the persisted index.
 Journal
 ~~~~~~~
 
-To avoid wearing out the flash, the index is only persisted (*commited*) when
+To avoid wearing out the flash, the index is only persisted (*committed*) when
 certain conditions are met (eg. ``fsync(2)``). The journal is used to record
 any changes (in form of inode nodes, data nodes etc.) between commits
 of the index. During mount, the journal is read from the flash and replayed

Documentation/filesystems/vfat.rst

@@ -50,7 +50,7 @@ VFAT MOUNT OPTIONS
 	Normally utime(2) checks current process is owner of
 	the file, or it has CAP_FOWNER capability. But FAT
 	filesystem doesn't have uid/gid on disk, so normal
-	check is too unflexible. With this option you can
+	check is too inflexible. With this option you can
 	relax it.
 
 **codepage=###**

Documentation/filesystems/vfs.rst

@@ -761,7 +761,7 @@ is an error during writeback, they expect that error to be reported when
 a file sync request is made.  After an error has been reported on one
 request, subsequent requests on the same file descriptor should return
 0, unless further writeback errors have occurred since the previous file
-syncronization.
+synchronization.
 
 Ideally, the kernel would report errors only on file descriptions on
 which writes were done that subsequently failed to be written back.  The

Documentation/filesystems/xfs-online-fsck-design.rst

@@ -293,7 +293,7 @@ The seven phases are as follows:
    Before starting repairs, the summary counters are checked and any necessary
    repairs are performed so that subsequent repairs will not fail the resource
    reservation step due to wildly incorrect summary counters.
-   Unsuccesful repairs are requeued as long as forward progress on repairs is
+   Unsuccessful repairs are requeued as long as forward progress on repairs is
    made somewhere in the filesystem.
    Free space in the filesystem is trimmed at the end of phase 4 if the
    filesystem is clean.
@@ -542,7 +542,7 @@ ondisk structure.
 
 Inspiration for quota and file link count repair strategies were drawn from
 sections 2.12 ("Online Index Operations") through 2.14 ("Incremental View
-Maintenace") of G.  Graefe, `"Concurrent Queries and Updates in Summary Views
+Maintenance") of G.  Graefe, `"Concurrent Queries and Updates in Summary Views
 and Their Indexes"
 <http://www.odbms.org/wp-content/uploads/2014/06/Increment-locks.pdf>`_, 2011.
 
@@ -605,7 +605,7 @@ functionality.
   The cron job does not have this protection.
 
 - **Fuzz Kiddiez**: There are many people now who seem to think that running
-  automated fuzz testing of ondisk artifacts to find mischevious behavior and
+  automated fuzz testing of ondisk artifacts to find mischievous behavior and
   spraying exploit code onto the public mailing list for instant zero-day
   disclosure is somehow of some social benefit.
   In the view of this author, the benefit is realized only when the fuzz
@@ -1351,7 +1351,7 @@ If the leaf information exceeds a single filesystem block, a dabtree (also
 rooted at block 0) is created to map hashes of the attribute names to leaf
 blocks in the attr fork.
 
-Checking an extended attribute structure is not so straightfoward due to the
+Checking an extended attribute structure is not so straightforward due to the
 lack of separation between attr blocks and index blocks.
 Scrub must read each block mapped by the attr fork and ignore the non-leaf
 blocks:
@@ -1401,7 +1401,7 @@ If the free space has been separated and the second partition grows again
 beyond one block, then a dabtree is used to map hashes of dirent names to
 directory data blocks.
 
-Checking a directory is pretty straightfoward:
+Checking a directory is pretty straightforward:
 
 1. Walk the dabtree in the second partition (if present) to ensure that there
    are no irregularities in the blocks or dabtree mappings that do not point to
@@ -1524,7 +1524,7 @@ Only online fsck has this requirement of total consistency of AG metadata, and
 should be relatively rare as compared to filesystem change operations.
 Online fsck coordinates with transaction chains as follows:
 
-* For each AG, maintain a count of intent items targetting that AG.
+* For each AG, maintain a count of intent items targeting that AG.
   The count should be bumped whenever a new item is added to the chain.
   The count should be dropped when the filesystem has locked the AG header
   buffers and finished the work.
@@ -2102,7 +2102,7 @@ quicksort and a heapsort subalgorithm in the spirit of
 kernel.
 To sort records in a reasonably short amount of time, ``xfarray`` takes
 advantage of the binary subpartitioning offered by quicksort, but it also uses
-heapsort to hedge aginst performance collapse if the chosen quicksort pivots
+heapsort to hedge against performance collapse if the chosen quicksort pivots
 are poor.
 Both algorithms are (in general) O(n * lg(n)), but there is a wide performance
 gulf between the two implementations.
@@ -2566,8 +2566,8 @@ old metadata blocks:
 The transaction rolling in steps 2c and 3 represent a weakness in the repair
 algorithm, because a log flush and a crash before the end of the reap step can
 result in space leaking.
-Online repair functions minimize the chances of this occuring by using very
-large transactions, which each can accomodate many thousands of block freeing
+Online repair functions minimize the chances of this occurring by using very
+large transactions, which each can accommodate many thousands of block freeing
 instructions.
 Repair moves on to reaping the old blocks, which will be presented in a
 subsequent :ref:`section<reaping>` after a few case studies of bulk loading.
@@ -5090,7 +5090,7 @@ This scan after validation of all filesystem metadata (except for the summary
 counters) as phase 6.
 The scan starts by calling ``FS_IOC_GETFSMAP`` to scan the filesystem space map
 to find areas that are allocated to file data fork extents.
-Gaps betweeen data fork extents that are smaller than 64k are treated as if
+Gaps between data fork extents that are smaller than 64k are treated as if
 they were data fork extents to reduce the command setup overhead.
 When the space map scan accumulates a region larger than 32MB, a media
 verification request is sent to the disk as a directio read of the raw block

Documentation/filesystems/zonefs.rst

@@ -378,7 +378,7 @@ The attributes defined are as follows.
   sequential zone files.  Failure to do so can result in write errors.
 * **max_active_seq_files**:  This attribute reports the maximum number of
   sequential zone files that are in an active state, that is, sequential zone
-  files that are partially writen (not empty nor full) or that have a zone that
+  files that are partially written (not empty nor full) or that have a zone that
   is explicitly open (which happens only if the *explicit-open* mount option is
   used).  This number is always equal to the maximum number of active zones that
   the device supports.  A value of 0 means that the mounted device has no limit

Documentation/firmware-guide/acpi/osi.rst

@@ -55,7 +55,7 @@ quirk, a bug, or a bug-fix.
 
 However this was discovered to be abused by other BIOS vendors to change
 completely unrelated code on completely unrelated systems.  This prompted
-an evaluation of all of it's uses. This uncovered that they aren't needed
+an evaluation of all of its uses. This uncovered that they aren't needed
 for any of the original reasons. As such, the kernel will not respond to
 any custom Linux-* strings by default.
 

Documentation/gpu/amdgpu/display/mpo-overview.rst

@@ -178,7 +178,7 @@ Multiple Display MPO
 
 AMDGPU supports display MPO when using multiple displays; however, this feature
 behavior heavily relies on the compositor implementation. Keep in mind that
-usespace can define different policies. For example, some OSes can use MPO to
+userspace can define different policies. For example, some OSes can use MPO to
 protect the plane that handles the video playback; notice that we don't have
 many limitations for a single display. Nonetheless, this manipulation can have
 many more restrictions for a multi-display scenario. The below example shows a

Documentation/gpu/drm-kms-helpers.rst

@@ -378,7 +378,7 @@ SCDC Helper Functions Reference
 HDMI Infoframes Helper Reference
 ================================
 
-Strictly speaking this is not a DRM helper library but generally useable
+Strictly speaking this is not a DRM helper library but generally usable
 by any driver interfacing with HDMI outputs like v4l or alsa drivers.
 But it nicely fits into the overall topic of mode setting helper
 libraries and hence is also included here.

Documentation/gpu/drm-kms.rst

@@ -66,11 +66,11 @@ Composition Properties`_ and related chapters.
 For the output routing the first step is encoders (represented by
 :c:type:`struct drm_encoder <drm_encoder>`, see `Encoder Abstraction`_). Those
 are really just internal artifacts of the helper libraries used to implement KMS
-drivers. Besides that they make it unecessarily more complicated for userspace
+drivers. Besides that they make it unnecessarily more complicated for userspace
 to figure out which connections between a CRTC and a connector are possible, and
 what kind of cloning is supported, they serve no purpose in the userspace API.
 Unfortunately encoders have been exposed to userspace, hence can't remove them
-at this point.  Futhermore the exposed restrictions are often wrongly set by
+at this point.  Furthermore the exposed restrictions are often wrongly set by
 drivers, and in many cases not powerful enough to express the real restrictions.
 A CRTC can be connected to multiple encoders, and for an active CRTC there must
 be at least one encoder.
@@ -260,7 +260,7 @@ Taken all together there's two consequences for the atomic design:
   drm_crtc_state <drm_crtc_state>` for CRTCs and :c:type:`struct
   drm_connector_state <drm_connector_state>` for connectors. These are the only
   objects with userspace-visible and settable state. For internal state drivers
-  can subclass these structures through embeddeding, or add entirely new state
+  can subclass these structures through embedding, or add entirely new state
   structures for their globally shared hardware functions, see :c:type:`struct
   drm_private_state<drm_private_state>`.
 

Documentation/gpu/drm-usage-stats.rst

@@ -8,7 +8,7 @@ DRM drivers can choose to export partly standardised text output via the
 `fops->show_fdinfo()` as part of the driver specific file operations registered
 in the `struct drm_driver` object registered with the DRM core.
 
-One purpose of this output is to enable writing as generic as practicaly
+One purpose of this output is to enable writing as generic as practically
 feasible `top(1)` like userspace monitoring tools.
 
 Given the differences between various DRM drivers the specification of the
@@ -119,7 +119,7 @@ drm-engine-<keystr> tag and shall contain the maximum frequency for the given
 engine.  Taken together with drm-cycles-<keystr>, this can be used to calculate
 percentage utilization of the engine, whereas drm-engine-<keystr> only reflects
 time active without considering what frequency the engine is operating as a
-percentage of it's maximum frequency.
+percentage of its maximum frequency.
 
 Memory
 ^^^^^^

Documentation/gpu/i915.rst

@@ -304,10 +304,10 @@ reads of following commands. Actions issued between different contexts
 and the only way to synchronize across contexts (even from the same
 file descriptor) is through the use of fences. At least as far back as
 Gen4, also have that a context carries with it a GPU HW context;
-the HW context is essentially (most of atleast) the state of a GPU.
+the HW context is essentially (most of at least) the state of a GPU.
 In addition to the ordering guarantees, the kernel will restore GPU
 state via HW context when commands are issued to a context, this saves
-user space the need to restore (most of atleast) the GPU state at the
+user space the need to restore (most of at least) the GPU state at the
 start of each batchbuffer. The non-deprecated ioctls to submit batchbuffer
 work can pass that ID (in the lower bits of drm_i915_gem_execbuffer2::rsvd1)
 to identify what context to use with the command.

Documentation/gpu/kms-properties.csv

@@ -17,7 +17,7 @@ Owner Module/Drivers,Group,Property Name,Type,Property Values,Object attached,De
 ,Virtual GPU,“suggested X”,RANGE,"Min=0, Max=0xffffffff",Connector,property to suggest an X offset for a connector
 ,,“suggested Y”,RANGE,"Min=0, Max=0xffffffff",Connector,property to suggest an Y offset for a connector
 ,Optional,"""aspect ratio""",ENUM,"{ ""None"", ""4:3"", ""16:9"" }",Connector,TDB
-i915,Generic,"""Broadcast RGB""",ENUM,"{ ""Automatic"", ""Full"", ""Limited 16:235"" }",Connector,"When this property is set to Limited 16:235 and CTM is set, the hardware will be programmed with the result of the multiplication of CTM by the limited range matrix to ensure the pixels normaly in the range 0..1.0 are remapped to the range 16/255..235/255."
+i915,Generic,"""Broadcast RGB""",ENUM,"{ ""Automatic"", ""Full"", ""Limited 16:235"" }",Connector,"When this property is set to Limited 16:235 and CTM is set, the hardware will be programmed with the result of the multiplication of CTM by the limited range matrix to ensure the pixels normally in the range 0..1.0 are remapped to the range 16/255..235/255."
 ,,“audio”,ENUM,"{ ""force-dvi"", ""off"", ""auto"", ""on"" }",Connector,TBD
 ,SDVO-TV,“mode”,ENUM,"{ ""NTSC_M"", ""NTSC_J"", ""NTSC_443"", ""PAL_B"" } etc.",Connector,TBD
 ,,"""left_margin""",RANGE,"Min=0, Max= SDVO dependent",Connector,TBD

Documentation/gpu/komeda-kms.rst

@@ -328,7 +328,7 @@ of course we’d better share as much as possible between different products. To
 achieve this, split the komeda device into two layers: CORE and CHIP.
 
 -   CORE: for common features and capabilities handling.
--   CHIP: for register programing and HW specific feature (limitation) handling.
+-   CHIP: for register programming and HW specific feature (limitation) handling.
 
 CORE can access CHIP by three chip function structures:
 
@@ -481,7 +481,7 @@ Build komeda to be a Linux module driver
 Now we have two level devices:
 
 -   komeda_dev: describes the real display hardware.
--   komeda_kms_dev: attachs or connects komeda_dev to DRM-KMS.
+-   komeda_kms_dev: attaches or connects komeda_dev to DRM-KMS.
 
 All komeda operations are supplied or operated by komeda_dev or komeda_kms_dev,
 the module driver is only a simple wrapper to pass the Linux command

Documentation/gpu/msm-crash-dump.rst

@@ -23,7 +23,7 @@ module
 	The module that generated the crashdump.
 
 time
-	The kernel time at crash formated as seconds.microseconds.
+	The kernel time at crash formatted as seconds.microseconds.
 
 comm
 	Comm string for the binary that generated the fault.

Documentation/gpu/rfc/i915_scheduler.rst

@@ -37,7 +37,7 @@ i915 with the DRM scheduler is:
 		* Watchdog hooks into DRM scheduler
 		* Lots of complexity of the GuC backend can be pulled out once
 		  integrated with DRM scheduler (e.g. state machine gets
-		  simplier, locking gets simplier, etc...)
+		  simpler, locking gets simpler, etc...)
 	* Execlists backend will minimum required to hook in the DRM scheduler
 		* Legacy interface
 		* Features like timeslicing / preemption / virtual engines would

Documentation/gpu/rfc/i915_vm_bind.rst

@@ -90,7 +90,7 @@ submission, they need only one dma-resv fence list updated. Thus, the fast
 path (where required mappings are already bound) submission latency is O(1)
 w.r.t the number of VM private BOs.
 
-VM_BIND locking hirarchy
+VM_BIND locking hierarchy
 -------------------------
 The locking design here supports the older (execlist based) execbuf mode, the
 newer VM_BIND mode, the VM_BIND mode with GPU page faults and possible future

Documentation/gpu/todo.rst

@@ -65,7 +65,7 @@ Clean up the clipped coordination confusion around planes
 ---------------------------------------------------------
 
 We have a helper to get this right with drm_plane_helper_check_update(), but
-it's not consistently used. This should be fixed, preferrably in the atomic
+it's not consistently used. This should be fixed, preferably in the atomic
 helpers (and drivers then moved over to clipped coordinates). Probably the
 helper should also be moved from drm_plane_helper.c to the atomic helpers, to
 avoid confusion - the other helpers in that file are all deprecated legacy
@@ -181,13 +181,13 @@ reversed.
 
 To solve this we need one standard per-object locking mechanism, which is
 dma_resv_lock(). This lock needs to be called as the outermost lock, with all
-other driver specific per-object locks removed. The problem is tha rolling out
+other driver specific per-object locks removed. The problem is that rolling out
 the actual change to the locking contract is a flag day, due to struct dma_buf
 buffer sharing.
 
 Level: Expert
 
-Convert logging to drm_* functions with drm_device paramater
+Convert logging to drm_* functions with drm_device parameter
 ------------------------------------------------------------
 
 For drivers which could have multiple instances, it is necessary to
@@ -244,7 +244,7 @@ Level: Advanced
 Benchmark and optimize blitting and format-conversion function
 --------------------------------------------------------------
 
-Drawing to dispay memory quickly is crucial for many applications'
+Drawing to display memory quickly is crucial for many applications'
 performance.
 
 On at least x86-64, sys_imageblit() is significantly slower than

Documentation/hwmon/pmbus-core.rst

@@ -345,7 +345,7 @@ PMBUS_NO_CAPABILITY
 
 Some PMBus chips don't respond with valid data when reading the CAPABILITY
 register. For such chips, this flag should be set so that the PMBus core
-driver doesn't use CAPABILITY to determine it's behavior.
+driver doesn't use CAPABILITY to determine its behavior.
 
 PMBUS_READ_STATUS_AFTER_FAILED_CHECK
 

Documentation/input/devices/iforce-protocol.rst

@@ -49,7 +49,7 @@ OP DATA
 == ====
 
 The 2B, LEN and CS fields have disappeared, probably because USB handles
-frames and data corruption is handled or unsignificant.
+frames and data corruption is handled or insignificant.
 
 First, I describe effects that are sent by the device to the computer
 

Documentation/input/multi-touch-protocol.rst

@@ -383,7 +383,7 @@ Finger Tracking
 ---------------
 
 The process of finger tracking, i.e., to assign a unique trackingID to each
-initiated contact on the surface, is a Euclidian Bipartite Matching
+initiated contact on the surface, is a Euclidean Bipartite Matching
 problem.  At each event synchronization, the set of actual contacts is
 matched to the set of contacts from the previous synchronization. A full
 implementation can be found in [#f3]_.

Documentation/livepatch/reliable-stacktrace.rst

@@ -40,7 +40,7 @@ Principally, the reliable stacktrace function must ensure that either:
 .. note::
    In some cases it is legitimate to omit specific functions from the trace,
    but all other functions must be reported. These cases are described in
-   futher detail below.
+   further detail below.
 
 Secondly, the reliable stacktrace function must be robust to cases where
 the stack or other unwind state is corrupt or otherwise unreliable. The

Documentation/locking/lockdep-design.rst

@@ -29,7 +29,7 @@ the validator will shoot a splat if incorrect.
 A lock-class's behavior is constructed by its instances collectively:
 when the first instance of a lock-class is used after bootup the class
 gets registered, then all (subsequent) instances will be mapped to the
-class and hence their usages and dependecies will contribute to those of
+class and hence their usages and dependencies will contribute to those of
 the class. A lock-class does not go away when a lock instance does, but
 it can be removed if the memory space of the lock class (static or
 dynamic) is reclaimed, this happens for example when a module is
@@ -105,7 +105,7 @@ exact case is for the lock as of the reporting time.
   +--------------+-------------+--------------+
 
 The character '-' suggests irq is disabled because if otherwise the
-charactor '?' would have been shown instead. Similar deduction can be
+character '?' would have been shown instead. Similar deduction can be
 applied for '+' too.
 
 Unused locks (e.g., mutexes) cannot be part of the cause of an error.

Documentation/locking/locktorture.rst

@@ -113,7 +113,7 @@ stutter
 		  without pausing.
 
 shuffle_interval
-		  The number of seconds to keep the test threads affinitied
+		  The number of seconds to keep the test threads affinitized
 		  to a particular subset of the CPUs, defaults to 3 seconds.
 		  Used in conjunction with test_no_idle_hz.
 

Documentation/locking/locktypes.rst

@@ -500,7 +500,7 @@ caveats also apply to bit spinlocks.
 Some bit spinlocks are replaced with regular spinlock_t for PREEMPT_RT
 using conditional (#ifdef'ed) code changes at the usage site.  In contrast,
 usage-site changes are not needed for the spinlock_t substitution.
-Instead, conditionals in header files and the core locking implemementation
+Instead, conditionals in header files and the core locking implementation
 enable the compiler to do the substitution transparently.
 
 

Documentation/mm/hmm.rst

@@ -417,7 +417,7 @@ entries. Any attempt to access the swap entry results in a fault which is
 resovled by replacing the entry with the original mapping. A driver gets
 notified that the mapping has been changed by MMU notifiers, after which point
 it will no longer have exclusive access to the page. Exclusive access is
-guranteed to last until the driver drops the page lock and page reference, at
+guaranteed to last until the driver drops the page lock and page reference, at
 which point any CPU faults on the page may proceed as described.
 
 Memory cgroup (memcg) and rss accounting

Documentation/mm/hwpoison.rst

@@ -48,7 +48,7 @@ of applications. KVM support requires a recent qemu-kvm release.
 For the KVM use there was need for a new signal type so that
 KVM can inject the machine check into the guest with the proper
 address. This in theory allows other applications to handle
-memory failures too. The expection is that near all applications
+memory failures too. The expectation is that most applications
 won't do that, but some very specialized ones might.
 
 Failure recovery modes

Documentation/mm/page_migration.rst

@@ -180,7 +180,7 @@ The following events (counters) can be used to monitor page migration.
 4. THP_MIGRATION_FAIL: A THP could not be migrated nor it could be split.
 
 5. THP_MIGRATION_SPLIT: A THP was migrated, but not as such: first, the THP had
-   to be split. After splitting, a migration retry was used for it's sub-pages.
+   to be split. After splitting, a migration retry was used for its sub-pages.
 
 THP_MIGRATION_* events also update the appropriate PGMIGRATE_SUCCESS or
 PGMIGRATE_FAIL events. For example, a THP migration failure will cause both

Documentation/mm/unevictable-lru.rst

@@ -463,7 +463,7 @@ can request that a region of memory be mlocked by supplying the MAP_LOCKED flag
 to the mmap() call.  There is one important and subtle difference here, though.
 mmap() + mlock() will fail if the range cannot be faulted in (e.g. because
 mm_populate fails) and returns with ENOMEM while mmap(MAP_LOCKED) will not fail.
-The mmaped area will still have properties of the locked area - pages will not
+The mmapped area will still have properties of the locked area - pages will not
 get swapped out - but major page faults to fault memory in might still happen.
 
 Furthermore, any mmap() call or brk() call that expands the heap by a task

Documentation/mm/vmemmap_dedup.rst

@@ -11,7 +11,7 @@ HugeTLB
 This section is to explain how HugeTLB Vmemmap Optimization (HVO) works.
 
 The ``struct page`` structures are used to describe a physical page frame. By
-default, there is a one-to-one mapping from a page frame to it's corresponding
+default, there is a one-to-one mapping from a page frame to its corresponding
 ``struct page``.
 
 HugeTLB pages consist of multiple base page size pages and is supported by many

Documentation/netlink/genetlink-c.yaml

@@ -41,7 +41,7 @@ properties:
     description: Name of the define for the family name.
     type: string
   c-version-name:
-    description: Name of the define for the verion of the family.
+    description: Name of the define for the version of the family.
     type: string
   max-by-define:
     description: Makes the number of attributes and commands be specified by a define, not an enum value.

Documentation/netlink/genetlink-legacy.yaml

@@ -41,7 +41,7 @@ properties:
     description: Name of the define for the family name.
     type: string
   c-version-name:
-    description: Name of the define for the verion of the family.
+    description: Name of the define for the version of the family.
     type: string
   max-by-define:
     description: Makes the number of attributes and commands be specified by a define, not an enum value.

Documentation/networking/bonding.rst

@@ -1636,7 +1636,7 @@ your init script::
 -----------------------------------------
 
 This section applies to distros which use /etc/network/interfaces file
-to describe network interface configuration, most notably Debian and it's
+to describe network interface configuration, most notably Debian and its
 derivatives.
 
 The ifup and ifdown commands on Debian don't support bonding out of

Documentation/networking/devlink/devlink-port.rst

@@ -321,9 +321,9 @@ API allows to configure following rate object's parameters:
   Allows for usage of Weighted Fair Queuing arbitration scheme among
   siblings. This arbitration scheme can be used simultaneously with the
   strict priority. As a node is configured with a higher rate it gets more
-  BW relative to it's siblings. Values are relative like a percentage
+  BW relative to its siblings. Values are relative like a percentage
   points, they basically tell how much BW should node take relative to
-  it's siblings.
+  its siblings.
 
 ``parent``
   Parent node name. Parent node rate limits are considered as additional limits
@@ -343,7 +343,7 @@ Arbitration flow from the high level:
 #. If group of nodes have the same priority perform WFQ arbitration on
    that subgroup. Use ``tx_weight`` as a parameter for this arbitration.
 
-#. Select the winner node, and continue arbitration flow among it's children,
+#. Select the winner node, and continue arbitration flow among its children,
    until leaf node is reached, and the winner is established.
 
 #. If all the nodes from the highest priority sub-group are satisfied, or

Documentation/networking/packet_mmap.rst

@@ -755,7 +755,7 @@ AF_PACKET TPACKET_V3 example
 ============================
 
 AF_PACKET's TPACKET_V3 ring buffer can be configured to use non-static frame
-sizes by doing it's own memory management. It is based on blocks where polling
+sizes by doing its own memory management. It is based on blocks where polling
 works on a per block basis instead of per ring as in TPACKET_V2 and predecessor.
 
 It is said that TPACKET_V3 brings the following benefits:

Documentation/power/energy-model.rst

@@ -87,9 +87,9 @@ CONFIG_ENERGY_MODEL must be enabled to use the EM framework.
 Registration of 'advanced' EM
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-The 'advanced' EM gets it's name due to the fact that the driver is allowed
+The 'advanced' EM gets its name due to the fact that the driver is allowed
 to provide more precised power model. It's not limited to some implemented math
-formula in the framework (like it's in 'simple' EM case). It can better reflect
+formula in the framework (like it is in 'simple' EM case). It can better reflect
 the real power measurements performed for each performance state. Thus, this
 registration method should be preferred in case considering EM static power
 (leakage) is important.

Documentation/powerpc/dscr.rst

@@ -6,7 +6,7 @@ DSCR register in powerpc allows user to have some control of prefetch of data
 stream in the processor. Please refer to the ISA documents or related manual
 for more detailed information regarding how to use this DSCR to attain this
 control of the prefetches . This document here provides an overview of kernel
-support for DSCR, related kernel objects, it's functionalities and exported
+support for DSCR, related kernel objects, its functionalities and exported
 user interface.
 
 (A) Data Structures:

Documentation/powerpc/kasan.txt

@@ -40,7 +40,7 @@ checks can be delayed until after the MMU is set is up, and we can just not
 instrument any code that runs with translations off after booting. This is the
 current approach.
 
-To avoid this limitiation, the KASAN shadow would have to be placed inside the
+To avoid this limitation, the KASAN shadow would have to be placed inside the
 linear mapping, using the same high-bits trick we use for the rest of the linear
 mapping. This is tricky:
 

Documentation/powerpc/papr_hcalls.rst

@@ -22,7 +22,7 @@ privileged operations. Currently there are two PAPR compliant hypervisors:
 On PPC64 arch a guest kernel running on top of a PAPR hypervisor is called
 a *pSeries guest*. A pseries guest runs in a supervisor mode (HV=0) and must
 issue hypercalls to the hypervisor whenever it needs to perform an action
-that is hypervisor priviledged [3]_ or for other services managed by the
+that is hypervisor privileged [3]_ or for other services managed by the
 hypervisor.
 
 Hence a Hypercall (hcall) is essentially a request by the pseries guest

Documentation/powerpc/qe_firmware.rst

@@ -232,11 +232,11 @@ For example, to match the 8323, revision 1.0::
 'extended_modes' is a bitfield that defines special functionality which has an
 impact on the device drivers.  Each bit has its own impact and has special
 instructions for the driver associated with it.  This field is stored in
-the QE library and available to any driver that calles qe_get_firmware_info().
+the QE library and available to any driver that calls qe_get_firmware_info().
 
 'vtraps' is an array of 8 words that contain virtual trap values for each
 virtual traps.  As with 'extended_modes', this field is stored in the QE
-library and available to any driver that calles qe_get_firmware_info().
+library and available to any driver that calls qe_get_firmware_info().
 
 'microcode' (type: struct qe_microcode):
 	For each RISC processor there is one 'microcode' structure.  The first

Documentation/powerpc/vas-api.rst

@@ -46,7 +46,7 @@ request queue into the application's virtual address space.
 The application can then submit one or more requests to the engine by
 using copy/paste instructions and pasting the CRBs to the virtual address
 (aka paste_address) returned by mmap(). User space can close the
-established connection or send window by closing the file descriptior
+established connection or send window by closing the file descriptor
 (close(fd)) or upon the process exit.
 
 Note that applications can send several requests with the same window or
@@ -240,7 +240,7 @@ issued. This signal returns with the following siginfo struct::
 	siginfo.si_signo = SIGSEGV;
 	siginfo.si_errno = EFAULT;
 	siginfo.si_code = SEGV_MAPERR;
-	siginfo.si_addr = CSB adress;
+	siginfo.si_addr = CSB address;
 
 In the case of multi-thread applications, NX send windows can be shared
 across all threads. For example, a child thread can open a send window,

Documentation/process/botching-up-ioctls.rst

@@ -208,7 +208,7 @@ Not every problem needs a new ioctl:
    it's much quicker to push a driver-private interface than engaging in
    lengthy discussions for a more generic solution. And occasionally doing a
    private interface to spearhead a new concept is what's required. But in the
-   end, once the generic interface comes around you'll end up maintainer two
+   end, once the generic interface comes around you'll end up maintaining two
    interfaces. Indefinitely.
 
  * Consider other interfaces than ioctls. A sysfs attribute is much better for

Documentation/process/kernel-docs.rst

@@ -29,7 +29,7 @@ All documents are cataloged with the following fields: the document's
 
    The documents on each section of this document are ordered by its
    published date, from the newest to the oldest. The maintainer(s) should
-   periodically retire resources as they become obsolte or outdated; with
+   periodically retire resources as they become obsolete or outdated; with
    the exception of foundational books.
 
 Docs at the Linux Kernel tree

Documentation/riscv/hwprobe.rst

@@ -88,11 +88,11 @@ The following keys are defined:
     always extremely slow.
 
   * :c:macro:`RISCV_HWPROBE_MISALIGNED_SLOW`: Misaligned accesses are supported
-    in hardware, but are slower than the cooresponding aligned accesses
+    in hardware, but are slower than the corresponding aligned accesses
     sequences.
 
   * :c:macro:`RISCV_HWPROBE_MISALIGNED_FAST`: Misaligned accesses are supported
-    in hardware and are faster than the cooresponding aligned accesses
+    in hardware and are faster than the corresponding aligned accesses
     sequences.
 
   * :c:macro:`RISCV_HWPROBE_MISALIGNED_UNSUPPORTED`: Misaligned accesses are

Documentation/riscv/vector.rst

@@ -13,7 +13,7 @@ order to support the use of the RISC-V Vector Extension.
 Two new prctl() calls are added to allow programs to manage the enablement
 status for the use of Vector in userspace. The intended usage guideline for
 these interfaces is to give init systems a way to modify the availability of V
-for processes running under its domain. Calling thess interfaces is not
+for processes running under its domain. Calling these interfaces is not
 recommended in libraries routines because libraries should not override policies
 configured from the parant process. Also, users must noted that these interfaces
 are not portable to non-Linux, nor non-RISC-V environments, so it is discourage

Documentation/s390/vfio-ap.rst

@@ -422,7 +422,7 @@ Configure the guest's AP resources
 Configuring the AP resources for a KVM guest will be performed when the
 VFIO_GROUP_NOTIFY_SET_KVM notifier callback is invoked. The notifier
 function is called when userspace connects to KVM. The guest's AP resources are
-configured via it's APCB by:
+configured via its APCB by:
 
 * Setting the bits in the APM corresponding to the APIDs assigned to the
   vfio_ap mediated device via its 'assign_adapter' interface.

Documentation/scheduler/sched-bwc.rst

@@ -186,7 +186,7 @@ average usage, albeit over a longer time window than a single period.  This
 also limits the burst ability to no more than 1ms per cpu.  This provides
 better more predictable user experience for highly threaded applications with
 small quota limits on high core count machines. It also eliminates the
-propensity to throttle these applications while simultanously using less than
+propensity to throttle these applications while simultaneously using less than
 quota amounts of cpu. Another way to say this, is that by allowing the unused
 portion of a slice to remain valid across periods we have decreased the
 possibility of wastefully expiring quota on cpu-local silos that don't need a

Documentation/scheduler/sched-energy.rst

@@ -82,7 +82,7 @@ through the arch_scale_cpu_capacity() callback.
 The rest of platform knowledge used by EAS is directly read from the Energy
 Model (EM) framework. The EM of a platform is composed of a power cost table
 per 'performance domain' in the system (see Documentation/power/energy-model.rst
-for futher details about performance domains).
+for further details about performance domains).
 
 The scheduler manages references to the EM objects in the topology code when the
 scheduling domains are built, or re-built. For each root domain (rd), the
@@ -281,7 +281,7 @@ mechanism called 'over-utilization'.
 From a general standpoint, the use-cases where EAS can help the most are those
 involving a light/medium CPU utilization. Whenever long CPU-bound tasks are
 being run, they will require all of the available CPU capacity, and there isn't
-much that can be done by the scheduler to save energy without severly harming
+much that can be done by the scheduler to save energy without severely harming
 throughput. In order to avoid hurting performance with EAS, CPUs are flagged as
 'over-utilized' as soon as they are used at more than 80% of their compute
 capacity. As long as no CPUs are over-utilized in a root domain, load balancing

Documentation/scsi/ChangeLog.lpfc

@@ -427,7 +427,7 @@ Changes from 20041207 to 20041213
 	* Changed version number to 8.0.17
 	* Fix sparse warnings by adding __iomem markers to lpfc_compat.h.
 	* Fix some sparse warnings -- 0 used as NULL pointer.
-	* Make sure there's a space between every if and it's (.
+	* Make sure there's a space between every if and its (.
 	* Fix some overly long lines and make sure hard tabs are used for
 	  indentation.
 	* Remove all trailing whitespace.

Documentation/security/digsig.rst

@@ -82,7 +82,7 @@ The signing and key management utilities evm-utils provide functionality
 to generate signatures, to load keys into the kernel keyring.
 Keys can be in PEM or converted to the kernel format.
 When the key is added to the kernel keyring, the keyid defines the name
-of the key: 5D2B05FC633EE3E8 in the example bellow.
+of the key: 5D2B05FC633EE3E8 in the example below.
 
 Here is example output of the keyctl utility::
 

Documentation/security/keys/core.rst

@@ -869,7 +869,7 @@ The keyctl syscall functions are:
 
 	 - ``char *hashname`` specifies the NUL terminated string identifying
 	   the hash used from the kernel crypto API and applied for the KDF
-	   operation. The KDF implemenation complies with SP800-56A as well
+	   operation. The KDF implementation complies with SP800-56A as well
 	   as with SP800-108 (the counter KDF).
 
 	 - ``char *otherinfo`` specifies the OtherInfo data as documented in

Documentation/security/secrets/coco.rst

@@ -34,7 +34,7 @@ be use it for its own purposes.
 
 During the VM's launch, the virtual machine manager may inject a secret to that
 area.  In AMD SEV and SEV-ES this is performed using the
-``KVM_SEV_LAUNCH_SECRET`` command (see [sev]_).  The strucutre of the injected
+``KVM_SEV_LAUNCH_SECRET`` command (see [sev]_).  The structure of the injected
 Guest Owner secret data should be a GUIDed table of secret values; the binary
 format is described in ``drivers/virt/coco/efi_secret/efi_secret.c`` under
 "Structure of the EFI secret area".

Documentation/sphinx/cdomain.py

@@ -178,7 +178,7 @@ class CObject(Base_CObject):
         if len(arglist[0].split(" ")) > 1:
             return False
 
-        # This is a function-like macro, it's arguments are typeless!
+        # This is a function-like macro, its arguments are typeless!
         signode  += addnodes.desc_name(fullname, fullname)
         paramlist = addnodes.desc_parameterlist()
         signode  += paramlist

Documentation/spi/spi-lm70llp.rst

@@ -69,7 +69,7 @@ Interpreting this circuit, when the LM70 SI/O line is High (or tristate
 and not grounded by the host via D7), the transistor conducts and switches
 the collector to zero, which is reflected on pin 13 of the DB25 parport
 connector.  When SI/O is Low (driven by the LM70 or the host) on the other
-hand, the transistor is cut off and the voltage tied to it's collector is
+hand, the transistor is cut off and the voltage tied to its collector is
 reflected on pin 13 as a High level.
 
 So: the getmiso inline routine in this driver takes this fact into account,

Documentation/tools/rtla/rtla-timerlat-top.rst

@@ -117,7 +117,7 @@ syscall in a btrfs file system.
 The raw trace is saved in the **timerlat_trace.txt** file for further analysis.
 
 Note that **rtla timerlat** was dispatched without changing *timerlat* tracer
-threads' priority. That is generally not needed because these threads hava
+threads' priority. That is generally not needed because these threads have
 priority *FIFO:95* by default, which is a common priority used by real-time
 kernel developers to analyze scheduling delays.
 

Documentation/trace/coresight/coresight-etm4x-reference.rst

@@ -675,7 +675,7 @@ Bit assignments shown below:-
     reconstructed using only conditional branches.
 
     There is currently no support in Perf for supplying modified binaries to the decoder, so this
-    feature is only inteded to be used for debugging purposes or with a 3rd party tool.
+    feature is only intended to be used for debugging purposes or with a 3rd party tool.
 
     Choosing this option will result in a significant increase in the amount of trace generated -
     possible danger of overflows, or fewer instructions covered. Note, that this option also

Documentation/trace/events.rst

@@ -915,7 +915,7 @@ functions can be used.
 
 To create a kprobe event, an empty or partially empty kprobe event
 should first be created using kprobe_event_gen_cmd_start().  The name
-of the event and the probe location should be specfied along with one
+of the event and the probe location should be specified along with one
 or args each representing a probe field should be supplied to this
 function.  Before calling kprobe_event_gen_cmd_start(), the user
 should create and initialize a dynevent_cmd object using
@@ -995,7 +995,7 @@ The basic idea is simple and amounts to providing a general-purpose
 layer that can be used to generate trace event commands.  The
 generated command strings can then be passed to the command-parsing
 and event creation code that already exists in the trace event
-subystem for creating the corresponding trace events.
+subsystem for creating the corresponding trace events.
 
 In a nutshell, the way it works is that the higher-level interface
 code creates a struct dynevent_cmd object, then uses a couple
@@ -1068,7 +1068,7 @@ to add an operator between the pair (here none) and a separator to be
 appended onto the end of the arg pair (here ';').
 
 There's also a dynevent_str_add() function that can be used to simply
-add a string as-is, with no spaces, delimeters, or arg check.
+add a string as-is, with no spaces, delimiters, or arg check.
 
 Any number of dynevent_*_add() calls can be made to build up the string
 (until its length surpasses cmd->maxlen).  When all the arguments have

Documentation/trace/fprobe.rst

@@ -113,7 +113,7 @@ If the entry callback function returns !0, the corresponding exit callback will
         the instruction pointer of @regs may be different from the @entry_ip
         in the entry_handler. If you need traced instruction pointer, you need
         to use @entry_ip. On the other hand, in the exit_handler, the instruction
-        pointer of @regs is set to the currect return address.
+        pointer of @regs is set to the current return address.
 
 @entry_data
         This is a local storage to share the data between entry and exit handlers.

Documentation/trace/ftrace.rst

@@ -2725,7 +2725,7 @@ It is default disabled.
 
 The return value of each traced function can be displayed after
 an equal sign "=". When encountering system call failures, it
-can be verfy helpful to quickly locate the function that first
+can be very helpful to quickly locate the function that first
 returns an error code.
 
 	- hide: echo nofuncgraph-retval > trace_options

Documentation/trace/hwlat_detector.rst

@@ -14,7 +14,7 @@ originally written for use by the "RT" patch since the Real Time
 kernel is highly latency sensitive.
 
 SMIs are not serviced by the Linux kernel, which means that it does not
-even know that they are occuring. SMIs are instead set up by BIOS code
+even know that they are occurring. SMIs are instead set up by BIOS code
 and are serviced by BIOS code, usually for "critical" events such as
 management of thermal sensors and fans. Sometimes though, SMIs are used for
 other tasks and those tasks can spend an inordinate amount of time in the

Documentation/trace/rv/da_monitor_synthesis.rst

 Deterministic Automata Monitor Synthesis
 ========================================
 
-The starting point for the application of runtime verification (RV) technics
+The starting point for the application of runtime verification (RV) techniques
 is the *specification* or *modeling* of the desired (or undesired) behavior
 of the system under scrutiny.
 

Documentation/trace/rv/monitor_wwnr.rst

@@ -26,7 +26,7 @@ definition::
              |   running   | -+
              +-------------+
 
-This model is borken, the reason is that a task can be running
+This model is broken, the reason is that a task can be running
 in the processor without being set as RUNNABLE. Think about a
 task about to sleep::
 

Documentation/trace/rv/runtime-verification.rst

@@ -31,7 +31,7 @@ In Linux terms, the runtime verification monitors are encapsulated inside the
 *RV monitor* abstraction. A *RV monitor* includes a reference model of the
 system, a set of instances of the monitor (per-cpu monitor, per-task monitor,
 and so on), and the helper functions that glue the monitor to the system via
-trace, as depicted bellow::
+trace, as depicted below::
 
  Linux   +---- RV Monitor ----------------------------------+ Formal
   Realm  |                                                  |  Realm

Documentation/trace/uprobetracer.rst

@@ -55,7 +55,7 @@ Synopsis of uprobe_tracer
 
   (\*1) only for return probe.
   (\*2) this is useful for fetching a field of data structures.
-  (\*3) Unlike kprobe event, "u" prefix will just be ignored, becuse uprobe
+  (\*3) Unlike kprobe event, "u" prefix will just be ignored, because uprobe
         events can access only user-space memory.
 
 Types

Documentation/trace/user_events.rst

@@ -93,7 +93,7 @@ or perf record -e user_events:[name] when attaching/recording.
 
 **NOTE:** The event subsystem name by default is "user_events". Callers should
 not assume it will always be "user_events". Operators reserve the right in the
-future to change the subsystem name per-process to accomodate event isolation.
+future to change the subsystem name per-process to accommodate event isolation.
 
 Command Format
 ^^^^^^^^^^^^^^

Documentation/usb/gadget_uvc.rst

@@ -168,7 +168,7 @@ Header linking
 
 The UVC specification requires that Format and Frame descriptors be preceded by
 Headers detailing things such as the number and cumulative size of the different
-Format descriptors that follow. This and similar operations are acheived in
+Format descriptors that follow. This and similar operations are achieved in
 configfs by linking between the configfs item representing the header and the
 config items representing those other descriptors, in this manner:
 

Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst

@@ -3293,7 +3293,7 @@ AV1 Frame Restoration Type.
 
 .. c:type:: v4l2_av1_loop_restoration
 
-AV1 Loop Restauration as described in section 6.10.15 "Loop restoration params
+AV1 Loop Restoration as described in section 6.10.15 "Loop restoration params
 semantics" of :ref:`av1`.
 
 .. cssclass:: longtable

Documentation/userspace-api/media/v4l/metafmt-d4xx.rst

@@ -237,7 +237,7 @@ Fish Eye sensor: ::
 camera projectors. As we have another field for "Laser Power" we introduced
 "LED Power" for extra emitter.
 
-The "Laser mode" __u32 fiels has been split into: ::
+The "Laser mode" __u32 fields has been split into: ::
    1 __u8 Emitter mode
    2 __u8 RFU byte
    3 __u16 LED Power

Documentation/userspace-api/netlink/intro.rst

@@ -615,7 +615,7 @@ and ``SET``. Each object can handle all or some of those requests
 is defined by the 2 lowest bits of the message type, so commands for
 new objects would always be allocated with a stride of 4.
 
-Each object would also have it's own fixed metadata shared by all request
+Each object would also have its own fixed metadata shared by all request
 types (e.g. struct ifinfomsg for netdev requests, struct ifaddrmsg for address
 requests, struct tcmsg for qdisc requests).
 

Documentation/virt/hyperv/clocks.rst

@@ -60,7 +60,7 @@ vDSO, and gettimeofday() and related system calls can execute
 entirely in user space.  The vDSO is implemented by mapping the
 shared page with scale and offset values into user space.  User
 space code performs the same algorithm of reading the TSC and
-appying the scale and offset to get the constant 10 MHz clock.
+applying the scale and offset to get the constant 10 MHz clock.
 
 Linux clockevents are based on Hyper-V synthetic timer 0. While
 Hyper-V offers 4 synthetic timers for each CPU, Linux only uses

Documentation/virt/kvm/api.rst

@@ -578,7 +578,7 @@ This is an asynchronous vcpu ioctl and can be invoked from any thread.
 RISC-V:
 ^^^^^^^
 
-Queues an external interrupt to be injected into the virutal CPU. This ioctl
+Queues an external interrupt to be injected into the virtual CPU. This ioctl
 is overloaded with 2 different irq values:
 
 a) KVM_INTERRUPT_SET
@@ -2722,7 +2722,7 @@ The isa config register can be read anytime but can only be written before
 a Guest VCPU runs. It will have ISA feature bits matching underlying host
 set by default.
 
-RISC-V core registers represent the general excution state of a Guest VCPU
+RISC-V core registers represent the general execution state of a Guest VCPU
 and it has the following id bit patterns::
 
   0x8020 0000 02 <index into the kvm_riscv_core struct:24> (32bit Host)
@@ -5232,7 +5232,7 @@ KVM_PV_DISABLE
   Deregister the VM from the Ultravisor and reclaim the memory that had
   been donated to the Ultravisor, making it usable by the kernel again.
   All registered VCPUs are converted back to non-protected ones. If a
-  previous protected VM had been prepared for asynchonous teardown with
+  previous protected VM had been prepared for asynchronous teardown with
   KVM_PV_ASYNC_CLEANUP_PREPARE and not subsequently torn down with
   KVM_PV_ASYNC_CLEANUP_PERFORM, it will be torn down in this call
   together with the current protected VM.
@@ -5692,7 +5692,7 @@ flags values for ``kvm_sregs2``:
 
 ``KVM_SREGS2_FLAGS_PDPTRS_VALID``
 
-  Indicates thats the struct contain valid PDPTR values.
+  Indicates that the struct contains valid PDPTR values.
 
 
 4.132 KVM_SET_SREGS2
@@ -6263,7 +6263,7 @@ to the byte array.
 
 It is strongly recommended that userspace use ``KVM_EXIT_IO`` (x86) or
 ``KVM_EXIT_MMIO`` (all except s390) to implement functionality that
-requires a guest to interact with host userpace.
+requires a guest to interact with host userspace.
 
 .. note:: KVM_EXIT_IO is significantly faster than KVM_EXIT_MMIO.
 
@@ -6336,7 +6336,7 @@ s390 specific.
 		} s390_ucontrol;
 
 s390 specific. A page fault has occurred for a user controlled virtual
-machine (KVM_VM_S390_UNCONTROL) on it's host page table that cannot be
+machine (KVM_VM_S390_UNCONTROL) on its host page table that cannot be
 resolved by the kernel.
 The program code and the translation exception code that were placed
 in the cpu's lowcore are presented here as defined by the z Architecture
@@ -7510,7 +7510,7 @@ APIC/MSRs/etc).
           attribute is not supported by KVM.
 
 KVM_CAP_SGX_ATTRIBUTE enables a userspace VMM to grant a VM access to one or
-more priveleged enclave attributes.  args[0] must hold a file handle to a valid
+more privileged enclave attributes.  args[0] must hold a file handle to a valid
 SGX attribute file corresponding to an attribute that is supported/restricted
 by KVM (currently only PROVISIONKEY).
 
@@ -7928,7 +7928,7 @@ writing to the respective MSRs.
 
 This capability indicates that userspace can load HV_X64_MSR_VP_INDEX msr.  Its
 value is used to denote the target vcpu for a SynIC interrupt.  For
-compatibilty, KVM initializes this msr to KVM's internal vcpu index.  When this
+compatibility, KVM initializes this msr to KVM's internal vcpu index.  When this
 capability is absent, userspace can still query this msr's value.
 
 8.13 KVM_CAP_S390_AIS_MIGRATION
@@ -8118,10 +8118,10 @@ regardless of what has actually been exposed through the CPUID leaf.
 :Parameters: args[0] - size of the dirty log ring
 
 KVM is capable of tracking dirty memory using ring buffers that are
-mmaped into userspace; there is one dirty ring per vcpu.
+mmapped into userspace; there is one dirty ring per vcpu.
 
 The dirty ring is available to userspace as an array of
-``struct kvm_dirty_gfn``.  Each dirty entry it's defined as::
+``struct kvm_dirty_gfn``.  Each dirty entry is defined as::
 
   struct kvm_dirty_gfn {
           __u32 flags;
@@ -8160,7 +8160,7 @@ state machine for the entry is as follows::
       |                                          |
       +------------------------------------------+
 
-To harvest the dirty pages, userspace accesses the mmaped ring buffer
+To harvest the dirty pages, userspace accesses the mmapped ring buffer
 to read the dirty GFNs.  If the flags has the DIRTY bit set (at this stage
 the RESET bit must be cleared), then it means this GFN is a dirty GFN.
 The userspace should harvest this GFN and mark the flags from state
@@ -8286,7 +8286,7 @@ the KVM_XEN_ATTR_TYPE_RUNSTATE_UPDATE_FLAG attribute in the KVM_XEN_SET_ATTR
 and KVM_XEN_GET_ATTR ioctls. This controls whether KVM will set the
 XEN_RUNSTATE_UPDATE flag in guest memory mapped vcpu_runstate_info during
 updates of the runstate information. Note that versions of KVM which support
-the RUNSTATE feature above, but not thie RUNSTATE_UPDATE_FLAG feature, will
+the RUNSTATE feature above, but not the RUNSTATE_UPDATE_FLAG feature, will
 always set the XEN_RUNSTATE_UPDATE flag when updating the guest structure,
 which is perhaps counterintuitive. When this flag is advertised, KVM will
 behave more correctly, not using the XEN_RUNSTATE_UPDATE flag until/unless
@@ -8335,7 +8335,7 @@ Architectures: x86
 
 When enabled, KVM will disable emulated Hyper-V features provided to the
 guest according to the bits Hyper-V CPUID feature leaves. Otherwise, all
-currently implmented Hyper-V features are provided unconditionally when
+currently implemented Hyper-V features are provided unconditionally when
 Hyper-V identification is set in the HYPERV_CPUID_INTERFACE (0x40000001)
 leaf.
 

Documentation/virt/kvm/devices/vm.rst

@@ -92,7 +92,7 @@ Allows user space to retrieve or request to change cpu related information for a
 KVM does not enforce or limit the cpu model data in any form. Take the information
 retrieved by means of KVM_S390_VM_CPU_MACHINE as hint for reasonable configuration
 setups. Instruction interceptions triggered by additionally set facility bits that
-are not handled by KVM need to by imlemented in the VM driver code.
+are not handled by KVM need to by implemented in the VM driver code.
 
 :Parameters: address of buffer to store/set the processor related cpu
 	     data of type struct kvm_s390_vm_cpu_processor*.

Documentation/virt/kvm/devices/xive.rst

@@ -50,7 +50,7 @@ the legacy interrupt mode, referred as XICS (POWER7/8).
 
   When a device is passed-through into the guest, the source
   interrupts are from a different HW controller (PHB4) and the ESB
-  pages exposed to the guest should accommadate this change.
+  pages exposed to the guest should accommodate this change.
 
   The passthru_irq helpers, kvmppc_xive_set_mapped() and
   kvmppc_xive_clr_mapped() are called when the device HW irqs are

Documentation/virt/kvm/halt-polling.rst

@@ -14,7 +14,7 @@ before giving up the cpu to the scheduler in order to let something else run.
 Polling provides a latency advantage in cases where the guest can be run again
 very quickly by at least saving us a trip through the scheduler, normally on
 the order of a few micro-seconds, although performance benefits are workload
-dependant. In the event that no wakeup source arrives during the polling
+dependent. In the event that no wakeup source arrives during the polling
 interval or some other task on the runqueue is runnable the scheduler is
 invoked. Thus halt polling is especially useful on workloads with very short
 wakeup periods where the time spent halt polling is minimised and the time

Documentation/virt/kvm/x86/mmu.rst

@@ -245,7 +245,7 @@ Shadow pages contain the following information:
     unsynchronized children).
   unsync_child_bitmap:
     A bitmap indicating which sptes in spt point (directly or indirectly) at
-    pages that may be unsynchronized.  Used to quickly locate all unsychronized
+    pages that may be unsynchronized.  Used to quickly locate all unsynchronized
     pages reachable from a given page.
   clear_spte_count:
     Only present on 32-bit hosts, where a 64-bit spte cannot be written

Documentation/virt/kvm/x86/running-nested-guests.rst

@@ -169,7 +169,7 @@ Enabling "nested" (s390x)
     $ modprobe kvm nested=1
 
 .. note:: On s390x, the kernel parameter ``hpage`` is mutually exclusive
-          with the ``nested`` paramter — i.e. to be able to enable
+          with the ``nested`` parameter — i.e. to be able to enable
           ``nested``, the ``hpage`` parameter *must* be disabled.
 
 2. The guest hypervisor (L1) must be provided with the ``sie`` CPU

Documentation/virt/uml/user_mode_linux_howto_v2.rst

@@ -1224,7 +1224,7 @@ between a driver and the host at the UML command line is OK
 security-wise. Allowing it as a loadable module parameter
 isn't.
 
-If such functionality is desireable for a particular application
+If such functionality is desirable for a particular application
 (e.g. loading BPF "firmware" for raw socket network transports),
 it should be off by default and should be explicitly turned on
 as a command line parameter at startup.

Documentation/w1/slaves/w1_therm.rst

@@ -58,7 +58,7 @@ A strong pullup will be applied during the conversion if required.
 
 ``conv_time`` is used to get current conversion time (read), and
 adjust it (write). A temperature conversion time depends on the device type and
-it's current resolution. Default conversion time is set by the driver according
+its current resolution. Default conversion time is set by the driver according
 to the device datasheet. A conversion time for many original device clones
 deviate from datasheet specs. There are three options: 1) manually set the
 correct conversion time by writing a value in milliseconds to ``conv_time``; 2)

Documentation/w1/w1-generic.rst

@@ -101,7 +101,7 @@ w1_master_search          (rw) the number of searches left to do,
 w1_master_slave_count     (ro) the number of slaves found
 w1_master_slaves          (ro) the names of the slaves, one per line
 w1_master_timeout         (ro) the delay in seconds between searches
-w1_master_timeout_us      (ro) the delay in microseconds beetwen searches
+w1_master_timeout_us      (ro) the delay in microseconds between searches
 ========================= =====================================================
 
 If you have a w1 bus that never changes (you don't add or remove devices),

Documentation/w1/w1-netlink.rst

@@ -66,7 +66,7 @@ Each connector message can include one or more w1_netlink_msg with
 zero or more attached w1_netlink_cmd messages.
 
 For event messages there are no w1_netlink_cmd embedded structures,
-only connector header and w1_netlink_msg strucutre with "len" field
+only connector header and w1_netlink_msg structure with "len" field
 being zero and filled type (one of event types) and id:
 either 8 bytes of slave unique id in host order,
 or master's id, which is assigned to bus master device

Documentation/watchdog/watchdog-kernel-api.rst

@@ -77,7 +77,7 @@ It contains following fields:
 * groups: List of sysfs attribute groups to create when creating the watchdog
   device.
 * info: a pointer to a watchdog_info structure. This structure gives some
-  additional information about the watchdog timer itself. (Like it's unique name)
+  additional information about the watchdog timer itself. (Like its unique name)
 * ops: a pointer to the list of watchdog operations that the watchdog supports.
 * gov: a pointer to the assigned watchdog device pretimeout governor or NULL.
 * timeout: the watchdog timer's timeout value (in seconds).

Documentation/wmi/devices/dell-wmi-ddv.rst

@@ -185,7 +185,7 @@ Performs an analysis of the battery and returns a status code:
 WMI method BatteryeRawAnalytics()
 ---------------------------------
 
-Returns a buffer usually containg 12 blocks of analytics data.
+Returns a buffer usually containing 12 blocks of analytics data.
 Those blocks contain:
 - block number starting with 0 (u8)
 - 31 bytes of unknown data
@@ -217,7 +217,7 @@ Returns the WMI interface version as an u32.
 WMI method FanSensorInformation()
 ---------------------------------
 
-Returns a buffer containg fan sensor entries, terminated
+Returns a buffer containing fan sensor entries, terminated
 with a single ``0xff``.
 Those entries contain: