powerpc/macio: Rework hotplug media bay support

The hotplug mediabay has tendrils deep into drivers/ide code
which makes a libata port reather difficult. In addition it's
ugly and could be done better.

This reworks the interface between the mediabay and the rest
of the world so that:

   - Any macio_driver can now have a mediabay_event callback
which will be called when that driver sits on a mediabay and
it's been either plugged or unplugged. The device type is
passed as an argument. We can now move all the IDE cruft
into the IDE driver itself

   - A check_media_bay() function can be used to take a peek
at the type of device currently in the bay if any, a cleaner
variant of the previous function with the same name.

   - A pair of lock/unlock functions are exposed to allow the
IDE driver to block the hotplug callbacks during the initial
setup and probing of the bay in order to avoid nasty race
conditions.

   - The mediabay code no longer needs to spin on the status
register of the IDE interface when it detects an IDE device,
this is done just fine by the IDE code itself

Overall, less code, simpler, and allows for another driver
than our old drivers/ide based one.
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
parent 128b4a0e
......@@ -134,6 +134,9 @@ struct macio_driver
int (*resume)(struct macio_dev* dev);
int (*shutdown)(struct macio_dev* dev);
#ifdef CONFIG_PMAC_MEDIABAY
void (*mediabay_event)(struct macio_dev* dev, int mb_state);
#endif
struct device_driver driver;
};
#define to_macio_driver(drv) container_of(drv,struct macio_driver, driver)
......
......@@ -17,26 +17,31 @@
#define MB_POWER 6 /* media bay contains a Power device (???) */
#define MB_NO 7 /* media bay contains nothing */
/* Number of bays in the machine or 0 */
extern int media_bay_count;
struct macio_dev;
#ifdef CONFIG_BLK_DEV_IDE_PMAC
#include <linux/ide.h>
#ifdef CONFIG_PMAC_MEDIABAY
int check_media_bay_by_base(unsigned long base, int what);
/* called by IDE PMAC host driver to register IDE controller for media bay */
int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base,
int irq, ide_hwif_t *hwif);
/* Check the content type of the bay, returns MB_NO if the bay is still
* transitionning
*/
extern int check_media_bay(struct macio_dev *bay);
int check_media_bay(struct device_node *which_bay, int what);
/* The ATA driver uses the calls below to temporarily hold on the
* media bay callbacks while initializing the interface
*/
extern void lock_media_bay(struct macio_dev *bay);
extern void unlock_media_bay(struct macio_dev *bay);
#else
static inline int check_media_bay(struct device_node *which_bay, int what)
static inline int check_media_bay(struct macio_dev *bay)
{
return -ENODEV;
return MB_NO;
}
static inline void lock_media_bay(struct macio_dev *bay) { }
static inline void unlock_media_bay(struct macio_dev *bay) { }
#endif
#endif /* __KERNEL__ */
......
......@@ -200,7 +200,7 @@ struct floppy_state {
int ejected;
wait_queue_head_t wait;
int wanted;
struct device_node* media_bay; /* NULL when not in bay */
struct macio_dev *mdev;
char dbdma_cmd_space[5 * sizeof(struct dbdma_cmd)];
};
......@@ -303,14 +303,13 @@ static int swim3_readbit(struct floppy_state *fs, int bit)
static void do_fd_request(struct request_queue * q)
{
int i;
for(i=0;i<floppy_count;i++)
{
#ifdef CONFIG_PMAC_MEDIABAY
if (floppy_states[i].media_bay &&
check_media_bay(floppy_states[i].media_bay, MB_FD))
for(i=0; i<floppy_count; i++) {
struct floppy_state *fs = &floppy_states[i];
if (fs->mdev->media_bay &&
check_media_bay(fs->mdev->media_bay) != MB_FD)
continue;
#endif /* CONFIG_PMAC_MEDIABAY */
start_request(&floppy_states[i]);
start_request(fs);
}
}
......@@ -849,10 +848,9 @@ static int floppy_ioctl(struct block_device *bdev, fmode_t mode,
if ((cmd & 0x80) && !capable(CAP_SYS_ADMIN))
return -EPERM;
#ifdef CONFIG_PMAC_MEDIABAY
if (fs->media_bay && check_media_bay(fs->media_bay, MB_FD))
if (fs->mdev->media_bay &&
check_media_bay(fs->mdev->media_bay) != MB_FD)
return -ENXIO;
#endif
switch (cmd) {
case FDEJECT:
......@@ -876,10 +874,9 @@ static int floppy_open(struct block_device *bdev, fmode_t mode)
int n, err = 0;
if (fs->ref_count == 0) {
#ifdef CONFIG_PMAC_MEDIABAY
if (fs->media_bay && check_media_bay(fs->media_bay, MB_FD))
if (fs->mdev->media_bay &&
check_media_bay(fs->mdev->media_bay) != MB_FD)
return -ENXIO;
#endif
out_8(&sw->setup, S_IBM_DRIVE | S_FCLK_DIV2);
out_8(&sw->control_bic, 0xff);
out_8(&sw->mode, 0x95);
......@@ -963,10 +960,9 @@ static int floppy_revalidate(struct gendisk *disk)
struct swim3 __iomem *sw;
int ret, n;
#ifdef CONFIG_PMAC_MEDIABAY
if (fs->media_bay && check_media_bay(fs->media_bay, MB_FD))
if (fs->mdev->media_bay &&
check_media_bay(fs->mdev->media_bay) != MB_FD)
return -ENXIO;
#endif
sw = fs->swim3;
grab_drive(fs, revalidating, 0);
......@@ -1009,7 +1005,6 @@ static const struct block_device_operations floppy_fops = {
static int swim3_add_device(struct macio_dev *mdev, int index)
{
struct device_node *swim = mdev->ofdev.node;
struct device_node *mediabay;
struct floppy_state *fs = &floppy_states[index];
int rc = -EBUSY;
......@@ -1036,9 +1031,7 @@ static int swim3_add_device(struct macio_dev *mdev, int index)
}
dev_set_drvdata(&mdev->ofdev.dev, fs);
mediabay = (strcasecmp(swim->parent->type, "media-bay") == 0) ?
swim->parent : NULL;
if (mediabay == NULL)
if (mdev->media_bay == NULL)
pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 1);
memset(fs, 0, sizeof(*fs));
......@@ -1068,7 +1061,7 @@ static int swim3_add_device(struct macio_dev *mdev, int index)
fs->secpercyl = 36;
fs->secpertrack = 18;
fs->total_secs = 2880;
fs->media_bay = mediabay;
fs->mdev = mdev;
init_waitqueue_head(&fs->wait);
fs->dma_cmd = (struct dbdma_cmd *) DBDMA_ALIGN(fs->dbdma_cmd_space);
......@@ -1093,7 +1086,7 @@ static int swim3_add_device(struct macio_dev *mdev, int index)
init_timer(&fs->timeout);
printk(KERN_INFO "fd%d: SWIM3 floppy controller %s\n", floppy_count,
mediabay ? "in media bay" : "");
mdev->media_bay ? "in media bay" : "");
return 0;
......
......@@ -43,10 +43,7 @@
#include <asm/pmac_feature.h>
#include <asm/sections.h>
#include <asm/irq.h>
#ifndef CONFIG_PPC64
#include <asm/mediabay.h>
#endif
#define DRV_NAME "ide-pmac"
......@@ -59,13 +56,14 @@ typedef struct pmac_ide_hwif {
int irq;
int kind;
int aapl_bus_id;
unsigned mediabay : 1;
unsigned broken_dma : 1;
unsigned broken_dma_warn : 1;
struct device_node* node;
struct macio_dev *mdev;
u32 timings[4];
volatile u32 __iomem * *kauai_fcr;
ide_hwif_t *hwif;
/* Those fields are duplicating what is in hwif. We currently
* can't use the hwif ones because of some assumptions that are
* beeing done by the generic code about the kind of dma controller
......@@ -854,6 +852,11 @@ sanitize_timings(pmac_ide_hwif_t *pmif)
pmif->timings[2] = pmif->timings[3] = value2;
}
static int on_media_bay(pmac_ide_hwif_t *pmif)
{
return pmif->mdev && pmif->mdev->media_bay != NULL;
}
/* Suspend call back, should be called after the child devices
* have actually been suspended
*/
......@@ -866,7 +869,7 @@ static int pmac_ide_do_suspend(pmac_ide_hwif_t *pmif)
disable_irq(pmif->irq);
/* The media bay will handle itself just fine */
if (pmif->mediabay)
if (on_media_bay(pmif))
return 0;
/* Kauai has bus control FCRs directly here */
......@@ -889,7 +892,7 @@ static int pmac_ide_do_suspend(pmac_ide_hwif_t *pmif)
static int pmac_ide_do_resume(pmac_ide_hwif_t *pmif)
{
/* Hard reset & re-enable controller (do we really need to reset ? -BenH) */
if (!pmif->mediabay) {
if (!on_media_bay(pmif)) {
ppc_md.feature_call(PMAC_FTR_IDE_RESET, pmif->node, pmif->aapl_bus_id, 1);
ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id, 1);
msleep(10);
......@@ -950,13 +953,11 @@ static void pmac_ide_init_dev(ide_drive_t *drive)
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
if (pmif->mediabay) {
#ifdef CONFIG_PMAC_MEDIABAY
if (check_media_bay_by_base(pmif->regbase, MB_CD) == 0) {
if (on_media_bay(pmif)) {
if (check_media_bay(pmif->mdev->media_bay) == MB_CD) {
drive->dev_flags &= ~IDE_DFLAG_NOPROBE;
return;
}
#endif
drive->dev_flags |= IDE_DFLAG_NOPROBE;
}
}
......@@ -1072,26 +1073,23 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif,
writel(KAUAI_FCR_UATA_MAGIC |
KAUAI_FCR_UATA_RESET_N |
KAUAI_FCR_UATA_ENABLE, pmif->kauai_fcr);
pmif->mediabay = 0;
/* Make sure we have sane timings */
sanitize_timings(pmif);
/* If we are on a media bay, wait for it to settle and lock it */
if (pmif->mdev)
lock_media_bay(pmif->mdev->media_bay);
host = ide_host_alloc(&d, hws, 1);
if (host == NULL)
return -ENOMEM;
hwif = host->ports[0];
if (host == NULL) {
rc = -ENOMEM;
goto bail;
}
hwif = pmif->hwif = host->ports[0];
#ifndef CONFIG_PPC64
/* XXX FIXME: Media bay stuff need re-organizing */
if (np->parent && np->parent->name
&& strcasecmp(np->parent->name, "media-bay") == 0) {
#ifdef CONFIG_PMAC_MEDIABAY
media_bay_set_ide_infos(np->parent, pmif->regbase, pmif->irq,
hwif);
#endif /* CONFIG_PMAC_MEDIABAY */
pmif->mediabay = 1;
if (on_media_bay(pmif)) {
/* Fixup bus ID for media bay */
if (!bidp)
pmif->aapl_bus_id = 1;
} else if (pmif->kind == controller_ohare) {
......@@ -1100,9 +1098,7 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif,
* units, I keep the old way
*/
ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, 0, 1);
} else
#endif
{
} else {
/* This is necessary to enable IDE when net-booting */
ppc_md.feature_call(PMAC_FTR_IDE_RESET, np, pmif->aapl_bus_id, 1);
ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, pmif->aapl_bus_id, 1);
......@@ -1112,17 +1108,21 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif,
}
printk(KERN_INFO DRV_NAME ": Found Apple %s controller (%s), "
"bus ID %d%s, irq %d\n", model_name[pmif->kind],
pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id,
pmif->mediabay ? " (mediabay)" : "", hw->irq);
"bus ID %d%s, irq %d\n", model_name[pmif->kind],
pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id,
on_media_bay(pmif) ? " (mediabay)" : "", hw->irq);
rc = ide_host_register(host, &d, hws);
if (rc) {
ide_host_free(host);
return rc;
}
if (rc)
pmif->hwif = NULL;
return 0;
if (pmif->mdev)
unlock_media_bay(pmif->mdev->media_bay);
bail:
if (rc && host)
ide_host_free(host);
return rc;
}
static void __devinit pmac_ide_init_ports(struct ide_hw *hw, unsigned long base)
......@@ -1362,6 +1362,25 @@ pmac_ide_pci_resume(struct pci_dev *pdev)
return rc;
}
#ifdef CONFIG_PMAC_MEDIABAY
static void pmac_ide_macio_mb_event(struct macio_dev* mdev, int mb_state)
{
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev);
switch(mb_state) {
case MB_CD:
if (!pmif->hwif->present)
ide_port_scan(pmif->hwif);
break;
default:
if (pmif->hwif->present)
ide_port_unregister_devices(pmif->hwif);
}
}
#endif /* CONFIG_PMAC_MEDIABAY */
static struct of_device_id pmac_ide_macio_match[] =
{
{
......@@ -1386,6 +1405,9 @@ static struct macio_driver pmac_ide_macio_driver =
.probe = pmac_ide_macio_attach,
.suspend = pmac_ide_macio_suspend,
.resume = pmac_ide_macio_resume,
#ifdef CONFIG_PMAC_MEDIABAY
.mediabay_event = pmac_ide_macio_mb_event,
#endif
};
static const struct pci_device_id pmac_ide_pci_match[] = {
......
......@@ -33,15 +33,6 @@
#include <linux/adb.h>
#include <linux/pmu.h>
#define MB_DEBUG
#ifdef MB_DEBUG
#define MBDBG(fmt, arg...) printk(KERN_INFO fmt , ## arg)
#else
#define MBDBG(fmt, arg...) do { } while (0)
#endif
#define MB_FCR32(bay, r) ((bay)->base + ((r) >> 2))
#define MB_FCR8(bay, r) (((volatile u8 __iomem *)((bay)->base)) + (r))
......@@ -76,28 +67,14 @@ struct media_bay_info {
int index;
int cached_gpio;
int sleeping;
int user_lock;
struct mutex lock;
#ifdef CONFIG_BLK_DEV_IDE_PMAC
ide_hwif_t *cd_port;
void __iomem *cd_base;
int cd_irq;
int cd_retry;
#endif
#if defined(CONFIG_BLK_DEV_IDE_PMAC)
int cd_index;
#endif
};
#define MAX_BAYS 2
static struct media_bay_info media_bays[MAX_BAYS];
int media_bay_count = 0;
#ifdef CONFIG_BLK_DEV_IDE_PMAC
/* check the busy bit in the media-bay ide interface
(assumes the media-bay contains an ide device) */
#define MB_IDE_READY(i) ((readb(media_bays[i].cd_base + 0x70) & 0x80) == 0)
#endif
static int media_bay_count = 0;
/*
* Wait that number of ms between each step in normal polling mode
......@@ -130,20 +107,10 @@ int media_bay_count = 0;
/*
* Wait this many ticks after an IDE device (e.g. CD-ROM) is inserted
* (or until the device is ready) before waiting for busy bit to disappear
* (or until the device is ready) before calling into the driver
*/
#define MB_IDE_WAIT 1000
/*
* Timeout waiting for busy bit of an IDE device to go down
*/
#define MB_IDE_TIMEOUT 5000
/*
* Max retries of the full power up/down sequence for an IDE device
*/
#define MAX_CD_RETRIES 3
/*
* States of a media bay
*/
......@@ -153,7 +120,6 @@ enum {
mb_enabling_bay, /* enable bits set, waiting MB_RESET_DELAY */
mb_resetting, /* reset bit unset, waiting MB_SETUP_DELAY */
mb_ide_resetting, /* IDE reset bit unser, waiting MB_IDE_WAIT */
mb_ide_waiting, /* Waiting for BUSY bit to go away until MB_IDE_TIMEOUT */
mb_up, /* Media bay full */
mb_powering_down /* Powering down (avoid too fast down/up) */
};
......@@ -373,12 +339,12 @@ static inline void set_mb_power(struct media_bay_info* bay, int onoff)
if (onoff) {
bay->ops->power(bay, 1);
bay->state = mb_powering_up;
MBDBG("mediabay%d: powering up\n", bay->index);
pr_debug("mediabay%d: powering up\n", bay->index);
} else {
/* Make sure everything is powered down & disabled */
bay->ops->power(bay, 0);
bay->state = mb_powering_down;
MBDBG("mediabay%d: powering down\n", bay->index);
pr_debug("mediabay%d: powering down\n", bay->index);
}
bay->timer = msecs_to_jiffies(MB_POWER_DELAY);
}
......@@ -387,107 +353,118 @@ static void poll_media_bay(struct media_bay_info* bay)
{
int id = bay->ops->content(bay);
if (id == bay->last_value) {
if (id != bay->content_id) {
bay->value_count += msecs_to_jiffies(MB_POLL_DELAY);
if (bay->value_count >= msecs_to_jiffies(MB_STABLE_DELAY)) {
/* If the device type changes without going thru
* "MB_NO", we force a pass by "MB_NO" to make sure
* things are properly reset
*/
if ((id != MB_NO) && (bay->content_id != MB_NO)) {
id = MB_NO;
MBDBG("mediabay%d: forcing MB_NO\n", bay->index);
}
MBDBG("mediabay%d: switching to %d\n", bay->index, id);
set_mb_power(bay, id != MB_NO);
bay->content_id = id;
if (id == MB_NO) {
#ifdef CONFIG_BLK_DEV_IDE_PMAC
bay->cd_retry = 0;
#endif
printk(KERN_INFO "media bay %d is empty\n", bay->index);
}
}
}
} else {
static char *mb_content_types[] = {
"a floppy drive",
"a floppy drive",
"an unsuported audio device",
"an ATA device",
"an unsupported PCI device",
"an unknown device",
};
if (id != bay->last_value) {
bay->last_value = id;
bay->value_count = 0;
return;
}
if (id == bay->content_id)
return;
bay->value_count += msecs_to_jiffies(MB_POLL_DELAY);
if (bay->value_count >= msecs_to_jiffies(MB_STABLE_DELAY)) {
/* If the device type changes without going thru
* "MB_NO", we force a pass by "MB_NO" to make sure
* things are properly reset
*/
if ((id != MB_NO) && (bay->content_id != MB_NO)) {
id = MB_NO;
pr_debug("mediabay%d: forcing MB_NO\n", bay->index);
}
pr_debug("mediabay%d: switching to %d\n", bay->index, id);
set_mb_power(bay, id != MB_NO);
bay->content_id = id;
if (id >= MB_NO || id < 0)
printk(KERN_INFO "mediabay%d: Bay is now empty\n", bay->index);
else
printk(KERN_INFO "mediabay%d: Bay contains %s\n",
bay->index, mb_content_types[id]);
}
}
#ifdef CONFIG_BLK_DEV_IDE_PMAC
int check_media_bay(struct device_node *which_bay, int what)
int check_media_bay(struct macio_dev *baydev)
{
int i;
struct media_bay_info* bay;
int id;
for (i=0; i<media_bay_count; i++)
if (media_bays[i].mdev && which_bay == media_bays[i].mdev->ofdev.node) {
if ((what == media_bays[i].content_id) && media_bays[i].state == mb_up)
return 0;
media_bays[i].cd_index = -1;
return -EINVAL;
}
return -ENODEV;
if (baydev == NULL)
return MB_NO;
/* This returns an instant snapshot, not locking, sine
* we may be called with the bay lock held. The resulting
* fuzzyness of the result if called at the wrong time is
* not actually a huge deal
*/
bay = macio_get_drvdata(baydev);
if (bay == NULL)
return MB_NO;
id = bay->content_id;
if (bay->state != mb_up)
return MB_NO;
if (id == MB_FD1)
return MB_FD;
return id;
}
EXPORT_SYMBOL(check_media_bay);
EXPORT_SYMBOL_GPL(check_media_bay);
int check_media_bay_by_base(unsigned long base, int what)
void lock_media_bay(struct macio_dev *baydev)
{
int i;
for (i=0; i<media_bay_count; i++)
if (media_bays[i].mdev && base == (unsigned long) media_bays[i].cd_base) {
if ((what == media_bays[i].content_id) && media_bays[i].state == mb_up)
return 0;
media_bays[i].cd_index = -1;
return -EINVAL;
}
struct media_bay_info* bay;
return -ENODEV;
if (baydev == NULL)
return;
bay = macio_get_drvdata(baydev);
if (bay == NULL)
return;
mutex_lock(&bay->lock);
bay->user_lock = 1;
}
EXPORT_SYMBOL_GPL(check_media_bay_by_base);
EXPORT_SYMBOL_GPL(lock_media_bay);
int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base,
int irq, ide_hwif_t *hwif)
void unlock_media_bay(struct macio_dev *baydev)
{
int i;
struct media_bay_info* bay;
for (i=0; i<media_bay_count; i++) {
struct media_bay_info* bay = &media_bays[i];
if (bay->mdev && which_bay == bay->mdev->ofdev.node) {
int timeout = 5000, index = hwif->index;
mutex_lock(&bay->lock);
bay->cd_port = hwif;
bay->cd_base = (void __iomem *) base;
bay->cd_irq = irq;
if ((MB_CD != bay->content_id) || bay->state != mb_up) {
mutex_unlock(&bay->lock);
return 0;
}
printk(KERN_DEBUG "Registered ide%d for media bay %d\n", index, i);
do {
if (MB_IDE_READY(i)) {
bay->cd_index = index;
mutex_unlock(&bay->lock);
return 0;
}
mdelay(1);
} while(--timeout);
printk(KERN_DEBUG "Timeount waiting IDE in bay %d\n", i);
mutex_unlock(&bay->lock);
return -ENODEV;
}
if (baydev == NULL)
return;
bay = macio_get_drvdata(baydev);
if (bay == NULL)
return;
if (bay->user_lock) {
bay->user_lock = 0;
mutex_unlock(&bay->lock);
}
}
EXPORT_SYMBOL_GPL(unlock_media_bay);
return -ENODEV;
static int mb_broadcast_hotplug(struct device *dev, void *data)
{
struct media_bay_info* bay = data;
struct macio_dev *mdev;
struct macio_driver *drv;
int state;
if (dev->bus != &macio_bus_type)
return 0;
state = bay->state == mb_up ? bay->content_id : MB_NO;
if (state == MB_FD1)
state = MB_FD;
mdev = to_macio_device(dev);
drv = to_macio_driver(dev->driver);
if (dev->driver && drv->mediabay_event)
drv->mediabay_event(mdev, state);
return 0;
}
EXPORT_SYMBOL_GPL(media_bay_set_ide_infos);
#endif /* CONFIG_BLK_DEV_IDE_PMAC */
static void media_bay_step(int i)
{
......@@ -497,8 +474,8 @@ static void media_bay_step(int i)
if (bay->state != mb_powering_down)
poll_media_bay(bay);
/* If timer expired or polling IDE busy, run state machine */
if ((bay->state != mb_ide_waiting) && (bay->timer != 0)) {
/* If timer expired run state machine */
if (bay->timer != 0) {
bay->timer -= msecs_to_jiffies(MB_POLL_DELAY);
if (bay->timer > 0)
return;
......@@ -508,100 +485,50 @@ static void media_bay_step(int i)
switch(bay->state) {
case mb_powering_up:
if (bay->ops->setup_bus(bay, bay->last_value) < 0) {
MBDBG("mediabay%d: device not supported (kind:%d)\n", i, bay->content_id);
pr_debug("mediabay%d: device not supported (kind:%d)\n",
i, bay->content_id);
set_mb_power(bay, 0);
break;
}
bay->timer = msecs_to_jiffies(MB_RESET_DELAY);
bay->state = mb_enabling_bay;
MBDBG("mediabay%d: enabling (kind:%d)\n", i, bay->content_id);
pr_debug("mediabay%d: enabling (kind:%d)\n", i, bay->content_id);
break;
case mb_enabling_bay:
bay->ops->un_reset(bay);
bay->timer = msecs_to_jiffies(MB_SETUP_DELAY);
bay->state = mb_resetting;
MBDBG("mediabay%d: waiting reset (kind:%d)\n", i, bay->content_id);
pr_debug("mediabay%d: releasing bay reset (kind:%d)\n",
i, bay->content_id);
break;
case mb_resetting:
if (bay->content_id != MB_CD) {
MBDBG("mediabay%d: bay is up (kind:%d)\n", i, bay->content_id);
pr_debug("mediabay%d: bay is up (kind:%d)\n", i,
bay->content_id);
bay->state = mb_up;
device_for_each_child(&bay->mdev->ofdev.dev,
bay, mb_broadcast_hotplug);
break;
}
#ifdef CONFIG_BLK_DEV_IDE_PMAC
MBDBG("mediabay%d: waiting IDE reset (kind:%d)\n", i, bay->content_id);
pr_debug("mediabay%d: releasing ATA reset (kind:%d)\n",
i, bay->content_id);
bay->ops->un_reset_ide(bay);
bay->timer = msecs_to_jiffies(MB_IDE_WAIT);
bay->state = mb_ide_resetting;
#else
printk(KERN_DEBUG "media-bay %d is ide (not compiled in kernel)\n", i);
set_mb_power(bay, 0);
#endif /* CONFIG_BLK_DEV_IDE_PMAC */
break;
#ifdef CONFIG_BLK_DEV_IDE_PMAC
case mb_ide_resetting:
bay->timer = msecs_to_jiffies(MB_IDE_TIMEOUT);
bay->state = mb_ide_waiting;
MBDBG("mediabay%d: waiting IDE ready (kind:%d)\n", i, bay->content_id);
pr_debug("mediabay%d: bay is up (kind:%d)\n", i, bay->content_id);
bay->state = mb_up;
device_for_each_child(&bay->mdev->ofdev.dev,
bay, mb_broadcast_hotplug);
break;
case mb_ide_waiting:
if (bay->cd_base == NULL) {
bay->timer = 0;
bay->state = mb_up;
MBDBG("mediabay%d: up before IDE init\n", i);
break;
} else if (MB_IDE_READY(i)) {
bay->timer = 0;
bay->state = mb_up;
if (bay->cd_index < 0) {
printk("mediabay %d, registering IDE...\n", i);
pmu_suspend();
ide_port_scan(bay->cd_port);
if (bay->cd_port->present)
bay->cd_index = bay->cd_port->index;
pmu_resume();
}
if (bay->cd_index == -1) {
/* We eventually do a retry */
bay->cd_retry++;
printk("IDE register error\n");
set_mb_power(bay, 0);
} else {
printk(KERN_DEBUG "media-bay %d is ide%d\n", i, bay->cd_index);
MBDBG("mediabay %d IDE ready\n", i);
}
break;
} else if (bay->timer > 0)
bay->timer -= msecs_to_jiffies(MB_POLL_DELAY);
if (bay->timer <= 0) {
printk("\nIDE Timeout in bay %d !, IDE state is: 0x%02x\n",
i, readb(bay->cd_base + 0x70));
MBDBG("mediabay%d: nIDE Timeout !\n", i);
set_mb_power(bay, 0);
bay->timer = 0;
}
break;
#endif /* CONFIG_BLK_DEV_IDE_PMAC */
case mb_powering_down:
bay->state = mb_empty;
#ifdef CONFIG_BLK_DEV_IDE_PMAC
if (bay->cd_index >= 0) {
printk(KERN_DEBUG "Unregistering mb %d ide, index:%d\n", i,
bay->cd_index);
ide_port_unregister_devices(bay->cd_port);
bay->cd_index = -1;
}
if (bay->cd_retry) {
if (bay->cd_retry > MAX_CD_RETRIES) {
/* Should add an error sound (sort of beep in dmasound) */
printk("\nmedia-bay %d, IDE device badly inserted or unrecognised\n", i);
} else {
/* Force a new power down/up sequence */
bay->content_id = MB_NO;
}
}
#endif /* CONFIG_BLK_DEV_IDE_PMAC */
MBDBG("mediabay%d: end of power down\n", i);
device_for_each_child(&bay->mdev->ofdev.dev,
bay, mb_broadcast_hotplug);
pr_debug("mediabay%d: end of power down\n", i);
break;
}
}
......@@ -676,11 +603,6 @@ static int __devinit media_bay_attach(struct macio_dev *mdev, const struct of_de
bay->last_value = bay->ops->content(bay);
bay->value_count = msecs_to_jiffies(MB_STABLE_DELAY);
bay->state = mb_empty;
do {
msleep(MB_POLL_DELAY);
media_bay_step(i);
} while((bay->state != mb_empty) &&
(bay->state != mb_up));
/* Mark us ready by filling our mdev data */
macio_set_drvdata(mdev, bay);
......@@ -725,7 +647,7 @@ static int media_bay_resume(struct macio_dev *mdev)
set_mb_power(bay, 0);
msleep(MB_POWER_DELAY);
if (bay->ops->content(bay) != bay->content_id) {
printk("mediabay%d: content changed during sleep...\n", bay->index);
printk("mediabay%d: Content changed during sleep...\n", bay->index);
mutex_unlock(&bay->lock);
return 0;
}
......@@ -733,9 +655,6 @@ static int media_bay_resume(struct macio_dev *mdev)
bay->last_value = bay->content_id;
bay->value_count = msecs_to_jiffies(MB_STABLE_DELAY);
bay->timer = msecs_to_jiffies(MB_POWER_DELAY);
#ifdef CONFIG_BLK_DEV_IDE_PMAC
bay->cd_retry = 0;
#endif
do {
msleep(MB_POLL_DELAY);
media_bay_step(bay->index);
......@@ -823,9 +742,6 @@ static int __init media_bay_init(void)
for (i=0; i<MAX_BAYS; i++) {
memset((char *)&media_bays[i], 0, sizeof(struct media_bay_info));
media_bays[i].content_id = -1;
#ifdef CONFIG_BLK_DEV_IDE_PMAC
media_bays[i].cd_index = -1;
#endif
}
if (!machine_is(powermac))
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment