Merge tag 'drm-misc-fixes-2018-09-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

drm-misc-fixes for v4.19-rc5:
- Fix crash in vgem in drm_drv_uses_atomic_modeset.
- Allow atomic drivers that don't set DRIVER_ATOMIC to create debugfs entries.
- Fix compiler warning for unused connector_funcs.
- Fix null pointer deref on UDL unplug.
- Disable DRM support for sun4i's R40 for now.
  (Not all patches went in for v4.19, so it has to wait a cycle.)
- NULL-terminate the of_device_id table in pl111.
- Make sure vc4 NV12 planar format works when displaying an unscaled fb.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/dda393bb-f13f-8d36-711b-cacfc578e5a3@linux.intel.com

drivers/gpu/drm/drm_atomic.c

@@ -2067,7 +2067,7 @@ static void __drm_state_dump(struct drm_device *dev, struct drm_printer *p,
 	struct drm_connector *connector;
 	struct drm_connector_list_iter conn_iter;
 
-	if (!drm_core_check_feature(dev, DRIVER_ATOMIC))
+	if (!drm_drv_uses_atomic_modeset(dev))
 		return;
 
 	list_for_each_entry(plane, &config->plane_list, head) {

drivers/gpu/drm/drm_debugfs.c

@@ -151,7 +151,7 @@ int drm_debugfs_init(struct drm_minor *minor, int minor_id,
 		return ret;
 	}
 
-	if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
+	if (drm_drv_uses_atomic_modeset(dev)) {
 		ret = drm_atomic_debugfs_init(minor);
 		if (ret) {
 			DRM_ERROR("Failed to create atomic debugfs files\n");

drivers/gpu/drm/drm_fb_helper.c

@@ -2370,7 +2370,6 @@ static int drm_pick_crtcs(struct drm_fb_helper *fb_helper,
 {
 	int c, o;
 	struct drm_connector *connector;
-	const struct drm_connector_helper_funcs *connector_funcs;
 	int my_score, best_score, score;
 	struct drm_fb_helper_crtc **crtcs, *crtc;
 	struct drm_fb_helper_connector *fb_helper_conn;
@@ -2399,8 +2398,6 @@ static int drm_pick_crtcs(struct drm_fb_helper *fb_helper,
 	if (drm_has_preferred_mode(fb_helper_conn, width, height))
 		my_score++;
 
-	connector_funcs = connector->helper_private;
-
 	/*
 	 * select a crtc for this connector and then attempt to configure
 	 * remaining connectors

drivers/gpu/drm/pl111/pl111_vexpress.c

@@ -111,7 +111,8 @@ static int vexpress_muxfpga_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id vexpress_muxfpga_match[] = {
-	{ .compatible = "arm,vexpress-muxfpga", }
+	{ .compatible = "arm,vexpress-muxfpga", },
+	{}
 };
 
 static struct platform_driver vexpress_muxfpga_driver = {

drivers/gpu/drm/sun4i/sun4i_drv.c

@@ -418,7 +418,6 @@ static const struct of_device_id sun4i_drv_of_table[] = {
 	{ .compatible = "allwinner,sun8i-a33-display-engine" },
 	{ .compatible = "allwinner,sun8i-a83t-display-engine" },
 	{ .compatible = "allwinner,sun8i-h3-display-engine" },
-	{ .compatible = "allwinner,sun8i-r40-display-engine" },
 	{ .compatible = "allwinner,sun8i-v3s-display-engine" },
 	{ .compatible = "allwinner,sun9i-a80-display-engine" },
 	{ }

drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c

@@ -398,7 +398,6 @@ static struct regmap_config sun8i_hdmi_phy_regmap_config = {
 
 static const struct sun8i_hdmi_phy_variant sun50i_a64_hdmi_phy = {
 	.has_phy_clk = true,
-	.has_second_pll = true,
 	.phy_init = &sun8i_hdmi_phy_init_h3,
 	.phy_disable = &sun8i_hdmi_phy_disable_h3,
 	.phy_config = &sun8i_hdmi_phy_config_h3,

drivers/gpu/drm/sun4i/sun8i_mixer.c

@@ -545,22 +545,6 @@ static const struct sun8i_mixer_cfg sun8i_h3_mixer0_cfg = {
 	.vi_num		= 1,
 };
 
-static const struct sun8i_mixer_cfg sun8i_r40_mixer0_cfg = {
-	.ccsc		= 0,
-	.mod_rate	= 297000000,
-	.scaler_mask	= 0xf,
-	.ui_num		= 3,
-	.vi_num		= 1,
-};
-
-static const struct sun8i_mixer_cfg sun8i_r40_mixer1_cfg = {
-	.ccsc		= 1,
-	.mod_rate	= 297000000,
-	.scaler_mask	= 0x3,
-	.ui_num		= 1,
-	.vi_num		= 1,
-};
-
 static const struct sun8i_mixer_cfg sun8i_v3s_mixer_cfg = {
 	.vi_num = 2,
 	.ui_num = 1,
@@ -582,14 +566,6 @@ static const struct of_device_id sun8i_mixer_of_table[] = {
 		.compatible = "allwinner,sun8i-h3-de2-mixer-0",
 		.data = &sun8i_h3_mixer0_cfg,
 	},
-	{
-		.compatible = "allwinner,sun8i-r40-de2-mixer-0",
-		.data = &sun8i_r40_mixer0_cfg,
-	},
-	{
-		.compatible = "allwinner,sun8i-r40-de2-mixer-1",
-		.data = &sun8i_r40_mixer1_cfg,
-	},
 	{
 		.compatible = "allwinner,sun8i-v3s-de2-mixer",
 		.data = &sun8i_v3s_mixer_cfg,

drivers/gpu/drm/sun4i/sun8i_tcon_top.c

@@ -253,7 +253,6 @@ static int sun8i_tcon_top_remove(struct platform_device *pdev)
 
 /* sun4i_drv uses this list to check if a device node is a TCON TOP */
 const struct of_device_id sun8i_tcon_top_of_table[] = {
-	{ .compatible = "allwinner,sun8i-r40-tcon-top" },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, sun8i_tcon_top_of_table);

drivers/gpu/drm/udl/udl_fb.c

@@ -432,9 +432,11 @@ static void udl_fbdev_destroy(struct drm_device *dev,
 {
 	drm_fb_helper_unregister_fbi(&ufbdev->helper);
 	drm_fb_helper_fini(&ufbdev->helper);
+	if (ufbdev->ufb.obj) {
 		drm_framebuffer_unregister_private(&ufbdev->ufb.base);
 		drm_framebuffer_cleanup(&ufbdev->ufb.base);
 		drm_gem_object_put_unlocked(&ufbdev->ufb.obj->base);
+	}
 }
 
 int udl_fbdev_init(struct drm_device *dev)

drivers/gpu/drm/vc4/vc4_plane.c

@@ -297,6 +297,9 @@ static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state)
 	vc4_state->y_scaling[0] = vc4_get_scaling_mode(vc4_state->src_h[0],
 						       vc4_state->crtc_h);
 
+	vc4_state->is_unity = (vc4_state->x_scaling[0] == VC4_SCALING_NONE &&
+			       vc4_state->y_scaling[0] == VC4_SCALING_NONE);
+
 	if (num_planes > 1) {
 		vc4_state->is_yuv = true;
 
@@ -312,24 +315,17 @@ static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state)
 			vc4_get_scaling_mode(vc4_state->src_h[1],
 					     vc4_state->crtc_h);
 
-		/* YUV conversion requires that scaling be enabled,
-		 * even on a plane that's otherwise 1:1.  Choose TPZ
-		 * for simplicity.
+		/* YUV conversion requires that horizontal scaling be enabled,
+		 * even on a plane that's otherwise 1:1. Looks like only PPF
+		 * works in that case, so let's pick that one.
 		 */
-		if (vc4_state->x_scaling[0] == VC4_SCALING_NONE)
-			vc4_state->x_scaling[0] = VC4_SCALING_TPZ;
-		if (vc4_state->y_scaling[0] == VC4_SCALING_NONE)
-			vc4_state->y_scaling[0] = VC4_SCALING_TPZ;
+		if (vc4_state->is_unity)
+			vc4_state->x_scaling[0] = VC4_SCALING_PPF;
 	} else {
 		vc4_state->x_scaling[1] = VC4_SCALING_NONE;
 		vc4_state->y_scaling[1] = VC4_SCALING_NONE;
 	}
 
-	vc4_state->is_unity = (vc4_state->x_scaling[0] == VC4_SCALING_NONE &&
-			       vc4_state->y_scaling[0] == VC4_SCALING_NONE &&
-			       vc4_state->x_scaling[1] == VC4_SCALING_NONE &&
-			       vc4_state->y_scaling[1] == VC4_SCALING_NONE);
-
 	/* No configuring scaling on the cursor plane, since it gets
 	   non-vblank-synced updates, and scaling requires requires
 	   LBM changes which have to be vblank-synced.
@@ -672,7 +668,10 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
 		vc4_dlist_write(vc4_state, SCALER_CSC2_ITR_R_601_5);
 	}
 
-	if (!vc4_state->is_unity) {
+	if (vc4_state->x_scaling[0] != VC4_SCALING_NONE ||
+	    vc4_state->x_scaling[1] != VC4_SCALING_NONE ||
+	    vc4_state->y_scaling[0] != VC4_SCALING_NONE ||
+	    vc4_state->y_scaling[1] != VC4_SCALING_NONE) {
 		/* LBM Base Address. */
 		if (vc4_state->y_scaling[0] != VC4_SCALING_NONE ||
 		    vc4_state->y_scaling[1] != VC4_SCALING_NONE) {

include/drm/drm_drv.h

@@ -675,7 +675,7 @@ static inline bool drm_core_check_feature(struct drm_device *dev, int feature)
 static inline bool drm_drv_uses_atomic_modeset(struct drm_device *dev)
 {
 	return drm_core_check_feature(dev, DRIVER_ATOMIC) ||
-		dev->mode_config.funcs->atomic_commit != NULL;
+		(dev->mode_config.funcs && dev->mode_config.funcs->atomic_commit != NULL);
 }