Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (adm1026) Allow 1 as a valid divider value
  hwmon: (adm1026) Fix setting fan_div
  hwmon: (it87) Fix manual fan speed control on IT8721F

drivers/hwmon/adm1026.c

@@ -916,27 +916,27 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
 	int nr = sensor_attr->index;
 	struct i2c_client *client = to_i2c_client(dev);
 	struct adm1026_data *data = i2c_get_clientdata(client);
-	int val, orig_div, new_div, shift;
+	int val, orig_div, new_div;
 
 	val = simple_strtol(buf, NULL, 10);
 	new_div = DIV_TO_REG(val);
-	if (new_div == 0) {
-		return -EINVAL;
-	}
+
 	mutex_lock(&data->update_lock);
 	orig_div = data->fan_div[nr];
 	data->fan_div[nr] = DIV_FROM_REG(new_div);
 
 	if (nr < 4) { /* 0 <= nr < 4 */
-		shift = 2 * nr;
 		adm1026_write_value(client, ADM1026_REG_FAN_DIV_0_3,
-			((DIV_TO_REG(orig_div) & (~(0x03 << shift))) |
-			(new_div << shift)));
+				    (DIV_TO_REG(data->fan_div[0]) << 0) |
+				    (DIV_TO_REG(data->fan_div[1]) << 2) |
+				    (DIV_TO_REG(data->fan_div[2]) << 4) |
+				    (DIV_TO_REG(data->fan_div[3]) << 6));
 	} else { /* 3 < nr < 8 */
-		shift = 2 * (nr - 4);
 		adm1026_write_value(client, ADM1026_REG_FAN_DIV_4_7,
-			((DIV_TO_REG(orig_div) & (~(0x03 << (2 * shift)))) |
-			(new_div << shift)));
+				    (DIV_TO_REG(data->fan_div[4]) << 0) |
+				    (DIV_TO_REG(data->fan_div[5]) << 2) |
+				    (DIV_TO_REG(data->fan_div[6]) << 4) |
+				    (DIV_TO_REG(data->fan_div[7]) << 6));
 	}
 
 	if (data->fan_div[nr] != orig_div) {

drivers/hwmon/it87.c

@@ -187,6 +187,7 @@ static const u8 IT87_REG_FANX_MIN[]	= { 0x1b, 0x1c, 0x1d, 0x85, 0x87 };
 #define IT87_REG_FAN_MAIN_CTRL 0x13
 #define IT87_REG_FAN_CTL       0x14
 #define IT87_REG_PWM(nr)       (0x15 + (nr))
+#define IT87_REG_PWM_DUTY(nr)  (0x63 + (nr) * 8)
 
 #define IT87_REG_VIN(nr)       (0x20 + (nr))
 #define IT87_REG_TEMP(nr)      (0x29 + (nr))
@@ -251,12 +252,16 @@ struct it87_data {
 	u8 fan_main_ctrl;	/* Register value */
 	u8 fan_ctl;		/* Register value */
 
-	/* The following 3 arrays correspond to the same registers. The
-	 * meaning of bits 6-0 depends on the value of bit 7, and we want
-	 * to preserve settings on mode changes, so we have to track all
-	 * values separately. */
+	/* The following 3 arrays correspond to the same registers up to
+	 * the IT8720F. The meaning of bits 6-0 depends on the value of bit
+	 * 7, and we want to preserve settings on mode changes, so we have
+	 * to track all values separately.
+	 * Starting with the IT8721F, the manual PWM duty cycles are stored
+	 * in separate registers (8-bit values), so the separate tracking
+	 * is no longer needed, but it is still done to keep the driver
+	 * simple. */
 	u8 pwm_ctrl[3];		/* Register value */
-	u8 pwm_duty[3];		/* Manual PWM value set by user (bit 6-0) */
+	u8 pwm_duty[3];		/* Manual PWM value set by user */
 	u8 pwm_temp_map[3];	/* PWM to temp. chan. mapping (bits 1-0) */
 
 	/* Automatic fan speed control registers */
@@ -832,7 +837,9 @@ static ssize_t set_pwm_enable(struct device *dev,
 				 data->fan_main_ctrl);
 	} else {
 		if (val == 1)				/* Manual mode */
-			data->pwm_ctrl[nr] = data->pwm_duty[nr];
+			data->pwm_ctrl[nr] = data->type == it8721 ?
+					     data->pwm_temp_map[nr] :
+					     data->pwm_duty[nr];
 		else					/* Automatic mode */
 			data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr];
 		it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
@@ -858,12 +865,25 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
 		return -EINVAL;
 
 	mutex_lock(&data->update_lock);
+	if (data->type == it8721) {
+		/* If we are in automatic mode, the PWM duty cycle register
+		 * is read-only so we can't write the value */
+		if (data->pwm_ctrl[nr] & 0x80) {
+			mutex_unlock(&data->update_lock);
+			return -EBUSY;
+		}
+		data->pwm_duty[nr] = pwm_to_reg(data, val);
+		it87_write_value(data, IT87_REG_PWM_DUTY(nr),
+				 data->pwm_duty[nr]);
+	} else {
 		data->pwm_duty[nr] = pwm_to_reg(data, val);
 		/* If we are in manual mode, write the duty cycle immediately;
 		 * otherwise, just store it for later use. */
 		if (!(data->pwm_ctrl[nr] & 0x80)) {
 			data->pwm_ctrl[nr] = data->pwm_duty[nr];
-		it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
+			it87_write_value(data, IT87_REG_PWM(nr),
+					 data->pwm_ctrl[nr]);
+		}
 	}
 	mutex_unlock(&data->update_lock);
 	return count;
@@ -1958,7 +1978,10 @@ static void __devinit it87_init_device(struct platform_device *pdev)
 	 *   channels to use when later setting to automatic mode later.
 	 *   Use a 1:1 mapping by default (we are clueless.)
 	 * In both cases, the value can (and should) be changed by the user
-	 * prior to switching to a different mode. */
+	 * prior to switching to a different mode.
+	 * Note that this is no longer needed for the IT8721F and later, as
+	 * these have separate registers for the temperature mapping and the
+	 * manual duty cycle. */
 	for (i = 0; i < 3; i++) {
 		data->pwm_temp_map[i] = i;
 		data->pwm_duty[i] = 0x7f;	/* Full speed */
@@ -2034,10 +2057,16 @@ static void __devinit it87_init_device(struct platform_device *pdev)
 static void it87_update_pwm_ctrl(struct it87_data *data, int nr)
 {
 	data->pwm_ctrl[nr] = it87_read_value(data, IT87_REG_PWM(nr));
+	if (data->type == it8721) {
+		data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
+		data->pwm_duty[nr] = it87_read_value(data,
+						     IT87_REG_PWM_DUTY(nr));
+	} else {
 		if (data->pwm_ctrl[nr] & 0x80)	/* Automatic mode */
 			data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
 		else				/* Manual mode */
 			data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f;
+	}
 
 	if (has_old_autopwm(data)) {
 		int i;