Commit d75d9e73 authored by Paul Walmsley's avatar Paul Walmsley Committed by paul

OMAP3 clock: add interconnect barriers to CORE DPLL M2 change

Where necessary, add interconnect barriers to force posted writes to
complete before continuing.
Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
parent 69d4255b
......@@ -66,22 +66,23 @@ unlock_dll:
ldr r4, omap3_sdrc_dlla_ctrl
ldr r5, [r4]
orr r5, r5, #0x4
str r5, [r4]
str r5, [r4] @ (no OCP barrier needed)
bx lr
lock_dll:
ldr r4, omap3_sdrc_dlla_ctrl
ldr r5, [r4]
bic r5, r5, #0x4
str r5, [r4]
str r5, [r4] @ (no OCP barrier needed)
bx lr
sdram_in_selfrefresh:
ldr r4, omap3_sdrc_power @ read the SDRC_POWER register
ldr r5, [r4] @ read the contents of SDRC_POWER
orr r5, r5, #0x40 @ enable self refresh on idle req
str r5, [r4] @ write back to SDRC_POWER register
ldr r5, [r4] @ posted-write barrier for SDRC
ldr r4, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg
ldr r5, [r4]
bic r5, r5, #0x2 @ disable iclk bit for SRDC
bic r5, r5, #0x2 @ disable iclk bit for SDRC
str r5, [r4]
wait_sdrc_idle:
ldr r4, omap3_cm_idlest1_core
......@@ -97,6 +98,7 @@ configure_core_dpll:
and r5, r5, r6
orr r5, r5, r3, lsl #0x1B @ r3 contains the M2 val
str r5, [r4]
ldr r5, [r4] @ posted-write barrier for CM
mov r5, #0x800 @ wait for the clock to stabilise
cmp r3, #2
bne wait_clk_stable
......@@ -152,6 +154,7 @@ configure_sdrc:
str r1, [r4]
ldr r4, omap3_sdrc_actim_ctrlb
str r2, [r4]
ldr r2, [r4] @ posted-write barrier for SDRC
bx lr
omap3_sdrc_power:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment