be2net: do not use SCRATCHPAD register

The CUST_SCRATCHPAD_CSR register is used for marking if FW cleanup is
needed. This is used in a crash kernel scenario. Do no use this register as
it is not available for some functions. Instead, always issue an FLR when
a function is probed *except* when VFs are preset (enabled in the previous
PF load).
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/emulex/benet/be_hw.h

@@ -58,8 +58,6 @@
 
 #define SLI_PORT_CONTROL_IP_MASK	0x08000000
 
-#define PCICFG_CUST_SCRATCHPAD_CSR	0x1EC
-
 /********* Memory BAR register ************/
 #define PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET 	0xfc
 /* Host Interrupt Enable, if set interrupts are enabled although "PCI Interrupt

drivers/net/ethernet/emulex/benet/be_main.c

@@ -1049,6 +1049,8 @@ static int be_find_vfs(struct be_adapter *adapter, int vf_state)
 	u16 offset, stride;
 
 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV);
+	if (!pos)
+		return 0;
 	pci_read_config_word(pdev, pos + PCI_SRIOV_VF_OFFSET, &offset);
 	pci_read_config_word(pdev, pos + PCI_SRIOV_VF_STRIDE, &stride);
 
@@ -2542,7 +2544,6 @@ static int be_clear(struct be_adapter *adapter)
 	be_cmd_fw_clean(adapter);
 
 	be_msix_disable(adapter);
-	pci_write_config_dword(adapter->pdev, PCICFG_CUST_SCRATCHPAD_CSR, 0);
 	return 0;
 }
 
@@ -2785,8 +2786,6 @@ static int be_setup(struct be_adapter *adapter)
 
 	schedule_delayed_work(&adapter->work, msecs_to_jiffies(1000));
 	adapter->flags |= BE_FLAGS_WORKER_SCHEDULED;
-
-	pci_write_config_dword(adapter->pdev, PCICFG_CUST_SCRATCHPAD_CSR, 1);
 	return 0;
 err:
 	be_clear(adapter);
@@ -3724,10 +3723,7 @@ static void be_worker(struct work_struct *work)
 
 static bool be_reset_required(struct be_adapter *adapter)
 {
-	u32 reg;
-
-	pci_read_config_dword(adapter->pdev, PCICFG_CUST_SCRATCHPAD_CSR, &reg);
-	return reg;
+	return be_find_vfs(adapter, ENABLED) > 0 ? false : true;
 }
 
 static int __devinit be_probe(struct pci_dev *pdev,