Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 pti updates from Ingo Molnar:
 "The main changes:

   - Make the IBPB barrier more strict and add STIBP support (Jiri
     Kosina)

   - Micro-optimize and clean up the entry code (Andy Lutomirski)

   - ... plus misc other fixes"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/speculation: Propagate information about RSB filling mitigation to sysfs
  x86/speculation: Enable cross-hyperthread spectre v2 STIBP mitigation
  x86/speculation: Apply IBPB more strictly to avoid cross-process data leak
  x86/speculation: Add RETPOLINE_AMD support to the inline asm CALL_NOSPEC variant
  x86/CPU: Fix unused variable warning when !CONFIG_IA32_EMULATION
  x86/pti/64: Remove the SYSCALL64 entry trampoline
  x86/entry/64: Use the TSS sp2 slot for SYSCALL/SYSRET scratch space
  x86/entry/64: Document idtentry

arch/x86/entry/entry_64.S

@@ -142,67 +142,6 @@ END(native_usergs_sysret64)
  * with them due to bugs in both AMD and Intel CPUs.
  */
 
-	.pushsection .entry_trampoline, "ax"
-
-/*
- * The code in here gets remapped into cpu_entry_area's trampoline.  This means
- * that the assembler and linker have the wrong idea as to where this code
- * lives (and, in fact, it's mapped more than once, so it's not even at a
- * fixed address).  So we can't reference any symbols outside the entry
- * trampoline and expect it to work.
- *
- * Instead, we carefully abuse %rip-relative addressing.
- * _entry_trampoline(%rip) refers to the start of the remapped) entry
- * trampoline.  We can thus find cpu_entry_area with this macro:
- */
-
-#define CPU_ENTRY_AREA \
-	_entry_trampoline - CPU_ENTRY_AREA_entry_trampoline(%rip)
-
-/* The top word of the SYSENTER stack is hot and is usable as scratch space. */
-#define RSP_SCRATCH	CPU_ENTRY_AREA_entry_stack + \
-			SIZEOF_entry_stack - 8 + CPU_ENTRY_AREA
-
-ENTRY(entry_SYSCALL_64_trampoline)
-	UNWIND_HINT_EMPTY
-	swapgs
-
-	/* Stash the user RSP. */
-	movq	%rsp, RSP_SCRATCH
-
-	/* Note: using %rsp as a scratch reg. */
-	SWITCH_TO_KERNEL_CR3 scratch_reg=%rsp
-
-	/* Load the top of the task stack into RSP */
-	movq	CPU_ENTRY_AREA_tss + TSS_sp1 + CPU_ENTRY_AREA, %rsp
-
-	/* Start building the simulated IRET frame. */
-	pushq	$__USER_DS			/* pt_regs->ss */
-	pushq	RSP_SCRATCH			/* pt_regs->sp */
-	pushq	%r11				/* pt_regs->flags */
-	pushq	$__USER_CS			/* pt_regs->cs */
-	pushq	%rcx				/* pt_regs->ip */
-
-	/*
-	 * x86 lacks a near absolute jump, and we can't jump to the real
-	 * entry text with a relative jump.  We could push the target
-	 * address and then use retq, but this destroys the pipeline on
-	 * many CPUs (wasting over 20 cycles on Sandy Bridge).  Instead,
-	 * spill RDI and restore it in a second-stage trampoline.
-	 */
-	pushq	%rdi
-	movq	$entry_SYSCALL_64_stage2, %rdi
-	JMP_NOSPEC %rdi
-END(entry_SYSCALL_64_trampoline)
-
-	.popsection
-
-ENTRY(entry_SYSCALL_64_stage2)
-	UNWIND_HINT_EMPTY
-	popq	%rdi
-	jmp	entry_SYSCALL_64_after_hwframe
-END(entry_SYSCALL_64_stage2)
-
 ENTRY(entry_SYSCALL_64)
 	UNWIND_HINT_EMPTY
 	/*
@@ -212,16 +151,14 @@ ENTRY(entry_SYSCALL_64)
 	 */
 
 	swapgs
-	/*
-	 * This path is only taken when PAGE_TABLE_ISOLATION is disabled so it
-	 * is not required to switch CR3.
-	 */
-	movq	%rsp, PER_CPU_VAR(rsp_scratch)
+	/* tss.sp2 is scratch space. */
+	movq	%rsp, PER_CPU_VAR(cpu_tss_rw + TSS_sp2)
+	SWITCH_TO_KERNEL_CR3 scratch_reg=%rsp
 	movq	PER_CPU_VAR(cpu_current_top_of_stack), %rsp
 
 	/* Construct struct pt_regs on stack */
 	pushq	$__USER_DS				/* pt_regs->ss */
-	pushq	PER_CPU_VAR(rsp_scratch)	/* pt_regs->sp */
+	pushq	PER_CPU_VAR(cpu_tss_rw + TSS_sp2)	/* pt_regs->sp */
 	pushq	%r11					/* pt_regs->flags */
 	pushq	$__USER_CS				/* pt_regs->cs */
 	pushq	%rcx					/* pt_regs->ip */
@@ -900,6 +837,42 @@ apicinterrupt IRQ_WORK_VECTOR			irq_work_interrupt		smp_irq_work_interrupt
  */
 #define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss_rw) + (TSS_ist + ((x) - 1) * 8)
 
+/**
+ * idtentry - Generate an IDT entry stub
+ * @sym:		Name of the generated entry point
+ * @do_sym: 		C function to be called
+ * @has_error_code: 	True if this IDT vector has an error code on the stack
+ * @paranoid: 		non-zero means that this vector may be invoked from
+ *			kernel mode with user GSBASE and/or user CR3.
+ *			2 is special -- see below.
+ * @shift_ist:		Set to an IST index if entries from kernel mode should
+ *             		decrement the IST stack so that nested entries get a
+ *			fresh stack.  (This is for #DB, which has a nasty habit
+ *             		of recursing.)
+ *
+ * idtentry generates an IDT stub that sets up a usable kernel context,
+ * creates struct pt_regs, and calls @do_sym.  The stub has the following
+ * special behaviors:
+ *
+ * On an entry from user mode, the stub switches from the trampoline or
+ * IST stack to the normal thread stack.  On an exit to user mode, the
+ * normal exit-to-usermode path is invoked.
+ *
+ * On an exit to kernel mode, if @paranoid == 0, we check for preemption,
+ * whereas we omit the preemption check if @paranoid != 0.  This is purely
+ * because the implementation is simpler this way.  The kernel only needs
+ * to check for asynchronous kernel preemption when IRQ handlers return.
+ *
+ * If @paranoid == 0, then the stub will handle IRET faults by pretending
+ * that the fault came from user mode.  It will handle gs_change faults by
+ * pretending that the fault happened with kernel GSBASE.  Since this handling
+ * is omitted for @paranoid != 0, the #GP, #SS, and #NP stubs must have
+ * @paranoid == 0.  This special handling will do the wrong thing for
+ * espfix-induced #DF on IRET, so #DF must not use @paranoid == 0.
+ *
+ * @paranoid == 2 is special: the stub will never switch stacks.  This is for
+ * #DF: if the thread stack is somehow unusable, we'll still get a useful OOPS.
+ */
 .macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1
 ENTRY(\sym)
 	UNWIND_HINT_IRET_REGS offset=\has_error_code*8

arch/x86/include/asm/cpu_entry_area.h

@@ -30,8 +30,6 @@ struct cpu_entry_area {
 	 */
 	struct tss_struct tss;
 
-	char entry_trampoline[PAGE_SIZE];
-
 #ifdef CONFIG_X86_64
 	/*
 	 * Exception stacks used for IST entries.

arch/x86/include/asm/nospec-branch.h

@@ -170,11 +170,15 @@
  */
 # define CALL_NOSPEC						\
 	ANNOTATE_NOSPEC_ALTERNATIVE				\
-	ALTERNATIVE(						\
+	ALTERNATIVE_2(						\
 	ANNOTATE_RETPOLINE_SAFE					\
 	"call *%[thunk_target]\n",				\
 	"call __x86_indirect_thunk_%V[thunk_target]\n",		\
-	X86_FEATURE_RETPOLINE)
+	X86_FEATURE_RETPOLINE,					\
+	"lfence;\n"						\
+	ANNOTATE_RETPOLINE_SAFE					\
+	"call *%[thunk_target]\n",				\
+	X86_FEATURE_RETPOLINE_AMD)
 # define THUNK_TARGET(addr) [thunk_target] "r" (addr)
 
 #elif defined(CONFIG_X86_32) && defined(CONFIG_RETPOLINE)
@@ -184,7 +188,8 @@
  * here, anyway.
  */
 # define CALL_NOSPEC						\
-	ALTERNATIVE(						\
+	ANNOTATE_NOSPEC_ALTERNATIVE				\
+	ALTERNATIVE_2(						\
 	ANNOTATE_RETPOLINE_SAFE					\
 	"call *%[thunk_target]\n",				\
 	"       jmp    904f;\n"					\
@@ -199,7 +204,11 @@
 	"       ret;\n"						\
 	"       .align 16\n"					\
 	"904:	call   901b;\n",				\
-	X86_FEATURE_RETPOLINE)
+	X86_FEATURE_RETPOLINE,					\
+	"lfence;\n"						\
+	ANNOTATE_RETPOLINE_SAFE					\
+	"call *%[thunk_target]\n",				\
+	X86_FEATURE_RETPOLINE_AMD)
 
 # define THUNK_TARGET(addr) [thunk_target] "rm" (addr)
 #else /* No retpoline for C / inline asm */

arch/x86/include/asm/processor.h

@@ -316,7 +316,13 @@ struct x86_hw_tss {
 	 */
 	u64			sp1;
 
+	/*
+	 * Since Linux does not use ring 2, the 'sp2' slot is unused by
+	 * hardware.  entry_SYSCALL_64 uses it as scratch space to stash
+	 * the user RSP value.
+	 */
 	u64			sp2;
+
 	u64			reserved2;
 	u64			ist[7];
 	u32			reserved3;

arch/x86/include/asm/sections.h

@@ -11,7 +11,6 @@ extern char __end_rodata_aligned[];
 
 #if defined(CONFIG_X86_64)
 extern char __end_rodata_hpage_align[];
-extern char __entry_trampoline_start[], __entry_trampoline_end[];
 #endif
 
 #endif	/* _ASM_X86_SECTIONS_H */

arch/x86/kernel/asm-offsets.c

@@ -96,13 +96,12 @@ void common(void) {
 	OFFSET(TLB_STATE_user_pcid_flush_mask, tlb_state, user_pcid_flush_mask);
 
 	/* Layout info for cpu_entry_area */
-	OFFSET(CPU_ENTRY_AREA_tss, cpu_entry_area, tss);
-	OFFSET(CPU_ENTRY_AREA_entry_trampoline, cpu_entry_area, entry_trampoline);
 	OFFSET(CPU_ENTRY_AREA_entry_stack, cpu_entry_area, entry_stack_page);
 	DEFINE(SIZEOF_entry_stack, sizeof(struct entry_stack));
 	DEFINE(MASK_entry_stack, (~(sizeof(struct entry_stack) - 1)));
 
-	/* Offset for sp0 and sp1 into the tss_struct */
+	/* Offset for fields in tss_struct */
 	OFFSET(TSS_sp0, tss_struct, x86_tss.sp0);
 	OFFSET(TSS_sp1, tss_struct, x86_tss.sp1);
+	OFFSET(TSS_sp2, tss_struct, x86_tss.sp2);
 }

arch/x86/kernel/cpu/bugs.c

@@ -35,12 +35,10 @@ static void __init spectre_v2_select_mitigation(void);
 static void __init ssb_select_mitigation(void);
 static void __init l1tf_select_mitigation(void);
 
-/*
- * Our boot-time value of the SPEC_CTRL MSR. We read it once so that any
- * writes to SPEC_CTRL contain whatever reserved bits have been set.
- */
-u64 __ro_after_init x86_spec_ctrl_base;
+/* The base value of the SPEC_CTRL MSR that always has to be preserved. */
+u64 x86_spec_ctrl_base;
 EXPORT_SYMBOL_GPL(x86_spec_ctrl_base);
+static DEFINE_MUTEX(spec_ctrl_mutex);
 
 /*
  * The vendor and possibly platform specific bits which can be modified in
@@ -326,6 +324,46 @@ static enum spectre_v2_mitigation_cmd __init spectre_v2_parse_cmdline(void)
 	return cmd;
 }
 
+static bool stibp_needed(void)
+{
+	if (spectre_v2_enabled == SPECTRE_V2_NONE)
+		return false;
+
+	if (!boot_cpu_has(X86_FEATURE_STIBP))
+		return false;
+
+	return true;
+}
+
+static void update_stibp_msr(void *info)
+{
+	wrmsrl(MSR_IA32_SPEC_CTRL, x86_spec_ctrl_base);
+}
+
+void arch_smt_update(void)
+{
+	u64 mask;
+
+	if (!stibp_needed())
+		return;
+
+	mutex_lock(&spec_ctrl_mutex);
+	mask = x86_spec_ctrl_base;
+	if (cpu_smt_control == CPU_SMT_ENABLED)
+		mask |= SPEC_CTRL_STIBP;
+	else
+		mask &= ~SPEC_CTRL_STIBP;
+
+	if (mask != x86_spec_ctrl_base) {
+		pr_info("Spectre v2 cross-process SMT mitigation: %s STIBP\n",
+				cpu_smt_control == CPU_SMT_ENABLED ?
+				"Enabling" : "Disabling");
+		x86_spec_ctrl_base = mask;
+		on_each_cpu(update_stibp_msr, NULL, 1);
+	}
+	mutex_unlock(&spec_ctrl_mutex);
+}
+
 static void __init spectre_v2_select_mitigation(void)
 {
 	enum spectre_v2_mitigation_cmd cmd = spectre_v2_parse_cmdline();
@@ -426,6 +464,9 @@ static void __init spectre_v2_select_mitigation(void)
 		setup_force_cpu_cap(X86_FEATURE_USE_IBRS_FW);
 		pr_info("Enabling Restricted Speculation for firmware calls\n");
 	}
+
+	/* Enable STIBP if appropriate */
+	arch_smt_update();
 }
 
 #undef pr_fmt
@@ -816,6 +857,8 @@ static ssize_t l1tf_show_state(char *buf)
 static ssize_t cpu_show_common(struct device *dev, struct device_attribute *attr,
 			       char *buf, unsigned int bug)
 {
+	int ret;
+
 	if (!boot_cpu_has_bug(bug))
 		return sprintf(buf, "Not affected\n");
 
@@ -833,10 +876,13 @@ static ssize_t cpu_show_common(struct device *dev, struct device_attribute *attr
 		return sprintf(buf, "Mitigation: __user pointer sanitization\n");
 
 	case X86_BUG_SPECTRE_V2:
-		return sprintf(buf, "%s%s%s%s\n", spectre_v2_strings[spectre_v2_enabled],
+		ret = sprintf(buf, "%s%s%s%s%s%s\n", spectre_v2_strings[spectre_v2_enabled],
 			       boot_cpu_has(X86_FEATURE_USE_IBPB) ? ", IBPB" : "",
 			       boot_cpu_has(X86_FEATURE_USE_IBRS_FW) ? ", IBRS_FW" : "",
+			       (x86_spec_ctrl_base & SPEC_CTRL_STIBP) ? ", STIBP" : "",
+			       boot_cpu_has(X86_FEATURE_RSB_CTXSW) ? ", RSB filling" : "",
 			       spectre_v2_module_string());
+		return ret;
 
 	case X86_BUG_SPEC_STORE_BYPASS:
 		return sprintf(buf, "%s\n", ssb_strings[ssb_mode]);

arch/x86/kernel/cpu/common.c

@@ -1534,18 +1534,7 @@ EXPORT_PER_CPU_SYMBOL(__preempt_count);
 /* May not be marked __init: used by software suspend */
 void syscall_init(void)
 {
-	extern char _entry_trampoline[];
-	extern char entry_SYSCALL_64_trampoline[];
-
-	int cpu = smp_processor_id();
-	unsigned long SYSCALL64_entry_trampoline =
-		(unsigned long)get_cpu_entry_area(cpu)->entry_trampoline +
-		(entry_SYSCALL_64_trampoline - _entry_trampoline);
-
 	wrmsr(MSR_STAR, 0, (__USER32_CS << 16) | __KERNEL_CS);
-	if (static_cpu_has(X86_FEATURE_PTI))
-		wrmsrl(MSR_LSTAR, SYSCALL64_entry_trampoline);
-	else
 	wrmsrl(MSR_LSTAR, (unsigned long)entry_SYSCALL_64);
 
 #ifdef CONFIG_IA32_EMULATION
@@ -1557,7 +1546,8 @@ void syscall_init(void)
 	 * AMD doesn't allow SYSENTER in long mode (either 32- or 64-bit).
 	 */
 	wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS);
-	wrmsrl_safe(MSR_IA32_SYSENTER_ESP, (unsigned long)(cpu_entry_stack(cpu) + 1));
+	wrmsrl_safe(MSR_IA32_SYSENTER_ESP,
+		    (unsigned long)(cpu_entry_stack(smp_processor_id()) + 1));
 	wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)entry_SYSENTER_compat);
 #else
 	wrmsrl(MSR_CSTAR, (unsigned long)ignore_sysret);

arch/x86/kernel/kprobes/core.c

@@ -1028,18 +1028,10 @@ NOKPROBE_SYMBOL(kprobe_fault_handler);
 
 bool arch_within_kprobe_blacklist(unsigned long addr)
 {
-	bool is_in_entry_trampoline_section = false;
-
-#ifdef CONFIG_X86_64
-	is_in_entry_trampoline_section =
-		(addr >= (unsigned long)__entry_trampoline_start &&
-		 addr < (unsigned long)__entry_trampoline_end);
-#endif
 	return  (addr >= (unsigned long)__kprobes_text_start &&
 		 addr < (unsigned long)__kprobes_text_end) ||
 		(addr >= (unsigned long)__entry_text_start &&
-		 addr < (unsigned long)__entry_text_end) ||
-		is_in_entry_trampoline_section;
+		 addr < (unsigned long)__entry_text_end);
 }
 
 int __init arch_init_kprobes(void)

arch/x86/kernel/process_64.c

@@ -60,8 +60,6 @@
 #include <asm/unistd_32_ia32.h>
 #endif
 
-__visible DEFINE_PER_CPU(unsigned long, rsp_scratch);
-
 /* Prints also some state that isn't saved in the pt_regs */
 void __show_regs(struct pt_regs *regs, enum show_regs_mode mode)
 {

arch/x86/kernel/traps.c

@@ -383,6 +383,10 @@ dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code)
 		 * we won't enable interupts or schedule before we invoke
 		 * general_protection, so nothing will clobber the stack
 		 * frame we just set up.
+		 *
+		 * We will enter general_protection with kernel GSBASE,
+		 * which is what the stub expects, given that the faulting
+		 * RIP will be the IRET instruction.
 		 */
 		regs->ip = (unsigned long)general_protection;
 		regs->sp = (unsigned long)&gpregs->orig_ax;

arch/x86/kernel/vmlinux.lds.S

@@ -136,16 +136,6 @@ SECTIONS
 		*(.fixup)
 		*(.gnu.warning)
 
-#ifdef CONFIG_X86_64
-		. = ALIGN(PAGE_SIZE);
-		__entry_trampoline_start = .;
-		_entry_trampoline = .;
-		*(.entry_trampoline)
-		. = ALIGN(PAGE_SIZE);
-		__entry_trampoline_end = .;
-		ASSERT(. - _entry_trampoline == PAGE_SIZE, "entry trampoline is too big");
-#endif
-
 #ifdef CONFIG_RETPOLINE
 		__indirect_thunk_start = .;
 		*(.text.__x86.indirect_thunk)

arch/x86/mm/cpu_entry_area.c

@@ -15,7 +15,6 @@ static DEFINE_PER_CPU_PAGE_ALIGNED(struct entry_stack_page, entry_stack_storage)
 #ifdef CONFIG_X86_64
 static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
 	[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ]);
-static DEFINE_PER_CPU(struct kcore_list, kcore_entry_trampoline);
 #endif
 
 struct cpu_entry_area *get_cpu_entry_area(int cpu)
@@ -83,8 +82,6 @@ static void percpu_setup_debug_store(int cpu)
 static void __init setup_cpu_entry_area(int cpu)
 {
 #ifdef CONFIG_X86_64
-	extern char _entry_trampoline[];
-
 	/* On 64-bit systems, we use a read-only fixmap GDT and TSS. */
 	pgprot_t gdt_prot = PAGE_KERNEL_RO;
 	pgprot_t tss_prot = PAGE_KERNEL_RO;
@@ -146,43 +143,10 @@ static void __init setup_cpu_entry_area(int cpu)
 	cea_map_percpu_pages(&get_cpu_entry_area(cpu)->exception_stacks,
 			     &per_cpu(exception_stacks, cpu),
 			     sizeof(exception_stacks) / PAGE_SIZE, PAGE_KERNEL);
-
-	cea_set_pte(&get_cpu_entry_area(cpu)->entry_trampoline,
-		     __pa_symbol(_entry_trampoline), PAGE_KERNEL_RX);
-	/*
-	 * The cpu_entry_area alias addresses are not in the kernel binary
-	 * so they do not show up in /proc/kcore normally.  This adds entries
-	 * for them manually.
-	 */
-	kclist_add_remap(&per_cpu(kcore_entry_trampoline, cpu),
-			 _entry_trampoline,
-			 &get_cpu_entry_area(cpu)->entry_trampoline, PAGE_SIZE);
 #endif
 	percpu_setup_debug_store(cpu);
 }
 
-#ifdef CONFIG_X86_64
-int arch_get_kallsym(unsigned int symnum, unsigned long *value, char *type,
-		     char *name)
-{
-	unsigned int cpu, ncpu = 0;
-
-	if (symnum >= num_possible_cpus())
-		return -EINVAL;
-
-	for_each_possible_cpu(cpu) {
-		if (ncpu++ >= symnum)
-			break;
-	}
-
-	*value = (unsigned long)&get_cpu_entry_area(cpu)->entry_trampoline;
-	*type = 't';
-	strlcpy(name, "__entry_SYSCALL_64_trampoline", KSYM_NAME_LEN);
-
-	return 0;
-}
-#endif
-
 static __init void setup_cpu_entry_area_ptes(void)
 {
 #ifdef CONFIG_X86_32

arch/x86/mm/pti.c

@@ -434,11 +434,42 @@ static void __init pti_clone_p4d(unsigned long addr)
 }
 
 /*
- * Clone the CPU_ENTRY_AREA into the user space visible page table.
+ * Clone the CPU_ENTRY_AREA and associated data into the user space visible
+ * page table.
  */
 static void __init pti_clone_user_shared(void)
 {
+	unsigned int cpu;
+
 	pti_clone_p4d(CPU_ENTRY_AREA_BASE);
+
+	for_each_possible_cpu(cpu) {
+		/*
+		 * The SYSCALL64 entry code needs to be able to find the
+		 * thread stack and needs one word of scratch space in which
+		 * to spill a register.  All of this lives in the TSS, in
+		 * the sp1 and sp2 slots.
+		 *
+		 * This is done for all possible CPUs during boot to ensure
+		 * that it's propagated to all mms.  If we were to add one of
+		 * these mappings during CPU hotplug, we would need to take
+		 * some measure to make sure that every mm that subsequently
+		 * ran on that CPU would have the relevant PGD entry in its
+		 * pagetables.  The usual vmalloc_fault() mechanism would not
+		 * work for page faults taken in entry_SYSCALL_64 before RSP
+		 * is set up.
+		 */
+
+		unsigned long va = (unsigned long)&per_cpu(cpu_tss_rw, cpu);
+		phys_addr_t pa = per_cpu_ptr_to_phys((void *)va);
+		pte_t *target_pte;
+
+		target_pte = pti_user_pagetable_walk_pte(va);
+		if (WARN_ON(!target_pte))
+			return;
+
+		*target_pte = pfn_pte(pa >> PAGE_SHIFT, PAGE_KERNEL);
+	}
 }
 
 #else /* CONFIG_X86_64 */

arch/x86/mm/tlb.c

@@ -7,6 +7,7 @@
 #include <linux/export.h>
 #include <linux/cpu.h>
 #include <linux/debugfs.h>
+#include <linux/ptrace.h>
 
 #include <asm/tlbflush.h>
 #include <asm/mmu_context.h>
@@ -180,6 +181,19 @@ static void sync_current_stack_to_mm(struct mm_struct *mm)
 	}
 }
 
+static bool ibpb_needed(struct task_struct *tsk, u64 last_ctx_id)
+{
+	/*
+	 * Check if the current (previous) task has access to the memory
+	 * of the @tsk (next) task. If access is denied, make sure to
+	 * issue a IBPB to stop user->user Spectre-v2 attacks.
+	 *
+	 * Note: __ptrace_may_access() returns 0 or -ERRNO.
+	 */
+	return (tsk && tsk->mm && tsk->mm->context.ctx_id != last_ctx_id &&
+		ptrace_may_access_sched(tsk, PTRACE_MODE_SPEC_IBPB));
+}
+
 void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
 			struct task_struct *tsk)
 {
@@ -286,18 +300,13 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
 		 * one process from doing Spectre-v2 attacks on another.
 		 *
 		 * As an optimization, flush indirect branches only when
-		 * switching into processes that disable dumping. This
-		 * protects high value processes like gpg, without having
-		 * too high performance overhead. IBPB is *expensive*!
-		 *
-		 * This will not flush branches when switching into kernel
-		 * threads. It will also not flush if we switch to idle
-		 * thread and back to the same process. It will flush if we
-		 * switch to a different non-dumpable process.
-		 */
-		if (tsk && tsk->mm &&
-		    tsk->mm->context.ctx_id != last_ctx_id &&
-		    get_dumpable(tsk->mm) != SUID_DUMP_USER)
+		 * switching into a processes that can't be ptrace by the
+		 * current one (as in such case, attacker has much more
+		 * convenient way how to tamper with the next process than
+		 * branch buffer poisoning).
+		 */
+		if (static_cpu_has(X86_FEATURE_USE_IBPB) &&
+				ibpb_needed(tsk, last_ctx_id))
 			indirect_branch_prediction_barrier();
 
 		if (IS_ENABLED(CONFIG_VMAP_STACK)) {

arch/x86/xen/xen-asm_64.S

@@ -91,13 +91,15 @@ ENTRY(xen_iret)
 ENTRY(xen_sysret64)
 	/*
 	 * We're already on the usermode stack at this point, but
-	 * still with the kernel gs, so we can easily switch back
+	 * still with the kernel gs, so we can easily switch back.
+	 *
+	 * tss.sp2 is scratch space.
 	 */
-	movq %rsp, PER_CPU_VAR(rsp_scratch)
+	movq %rsp, PER_CPU_VAR(cpu_tss_rw + TSS_sp2)
 	movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
 
 	pushq $__USER_DS
-	pushq PER_CPU_VAR(rsp_scratch)
+	pushq PER_CPU_VAR(cpu_tss_rw + TSS_sp2)
 	pushq %r11
 	pushq $__USER_CS
 	pushq %rcx

include/linux/ptrace.h

@@ -64,12 +64,15 @@ extern void exit_ptrace(struct task_struct *tracer, struct list_head *dead);
 #define PTRACE_MODE_NOAUDIT	0x04
 #define PTRACE_MODE_FSCREDS	0x08
 #define PTRACE_MODE_REALCREDS	0x10
+#define PTRACE_MODE_SCHED	0x20
+#define PTRACE_MODE_IBPB	0x40
 
 /* shorthands for READ/ATTACH and FSCREDS/REALCREDS combinations */
 #define PTRACE_MODE_READ_FSCREDS (PTRACE_MODE_READ | PTRACE_MODE_FSCREDS)
 #define PTRACE_MODE_READ_REALCREDS (PTRACE_MODE_READ | PTRACE_MODE_REALCREDS)
 #define PTRACE_MODE_ATTACH_FSCREDS (PTRACE_MODE_ATTACH | PTRACE_MODE_FSCREDS)
 #define PTRACE_MODE_ATTACH_REALCREDS (PTRACE_MODE_ATTACH | PTRACE_MODE_REALCREDS)
+#define PTRACE_MODE_SPEC_IBPB (PTRACE_MODE_ATTACH_REALCREDS | PTRACE_MODE_IBPB)
 
 /**
  * ptrace_may_access - check whether the caller is permitted to access
@@ -87,6 +90,20 @@ extern void exit_ptrace(struct task_struct *tracer, struct list_head *dead);
  */
 extern bool ptrace_may_access(struct task_struct *task, unsigned int mode);
 
+/**
+ * ptrace_may_access - check whether the caller is permitted to access
+ * a target task.
+ * @task: target task
+ * @mode: selects type of access and caller credentials
+ *
+ * Returns true on success, false on denial.
+ *
+ * Similar to ptrace_may_access(). Only to be called from context switch
+ * code. Does not call into audit and the regular LSM hooks due to locking
+ * constraints.
+ */
+extern bool ptrace_may_access_sched(struct task_struct *task, unsigned int mode);
+
 static inline int ptrace_reparented(struct task_struct *child)
 {
 	return !same_thread_group(child->real_parent, child->parent);

kernel/cpu.c

@@ -2055,6 +2055,12 @@ static void cpuhp_online_cpu_device(unsigned int cpu)
 	kobject_uevent(&dev->kobj, KOBJ_ONLINE);
 }
 
+/*
+ * Architectures that need SMT-specific errata handling during SMT hotplug
+ * should override this.
+ */
+void __weak arch_smt_update(void) { };
+
 static int cpuhp_smt_disable(enum cpuhp_smt_control ctrlval)
 {
 	int cpu, ret = 0;
@@ -2081,8 +2087,10 @@ static int cpuhp_smt_disable(enum cpuhp_smt_control ctrlval)
 		 */
 		cpuhp_offline_cpu_device(cpu);
 	}
-	if (!ret)
+	if (!ret) {
 		cpu_smt_control = ctrlval;
+		arch_smt_update();
+	}
 	cpu_maps_update_done();
 	return ret;
 }
@@ -2093,6 +2101,7 @@ static int cpuhp_smt_enable(void)
 
 	cpu_maps_update_begin();
 	cpu_smt_control = CPU_SMT_ENABLED;
+	arch_smt_update();
 	for_each_present_cpu(cpu) {
 		/* Skip online CPUs and CPUs on offline nodes */
 		if (cpu_online(cpu) || !node_online(cpu_to_node(cpu)))

kernel/ptrace.c

@@ -261,6 +261,9 @@ static int ptrace_check_attach(struct task_struct *child, bool ignore_state)
 
 static int ptrace_has_cap(struct user_namespace *ns, unsigned int mode)
 {
+	if (mode & PTRACE_MODE_SCHED)
+		return false;
+
 	if (mode & PTRACE_MODE_NOAUDIT)
 		return has_ns_capability_noaudit(current, ns, CAP_SYS_PTRACE);
 	else
@@ -328,9 +331,16 @@ static int __ptrace_may_access(struct task_struct *task, unsigned int mode)
 	     !ptrace_has_cap(mm->user_ns, mode)))
 	    return -EPERM;
 
+	if (mode & PTRACE_MODE_SCHED)
+		return 0;
 	return security_ptrace_access_check(task, mode);
 }
 
+bool ptrace_may_access_sched(struct task_struct *task, unsigned int mode)
+{
+	return __ptrace_may_access(task, mode | PTRACE_MODE_SCHED);
+}
+
 bool ptrace_may_access(struct task_struct *task, unsigned int mode)
 {
 	int err;