firmware: scm: Add new SCM call API for switching memory ownership

Two different processors on a SOC need to switch memory ownership
during load/unload. To enable this, second level memory map table
need to be updated, which is done by secure layer.
This patch adds the interface for making secure monitor call for
memory ownership switching request.
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
[bjorn: Minor style and kerneldoc updates]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

drivers/firmware/qcom_scm-32.c

@@ -579,6 +579,13 @@ int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
 	return ret ? : le32_to_cpu(scm_ret);
 }
 
+int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
+			  size_t mem_sz, phys_addr_t src, size_t src_sz,
+			  phys_addr_t dest, size_t dest_sz)
+{
+	return -ENODEV;
+}
+
 int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
 			       u32 spare)
 {

drivers/firmware/qcom_scm-64.c

@@ -382,6 +382,33 @@ int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
 	return ret ? : res.a1;
 }
 
+int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
+			  size_t mem_sz, phys_addr_t src, size_t src_sz,
+			  phys_addr_t dest, size_t dest_sz)
+{
+	int ret;
+	struct qcom_scm_desc desc = {0};
+	struct arm_smccc_res res;
+
+	desc.args[0] = mem_region;
+	desc.args[1] = mem_sz;
+	desc.args[2] = src;
+	desc.args[3] = src_sz;
+	desc.args[4] = dest;
+	desc.args[5] = dest_sz;
+	desc.args[6] = 0;
+
+	desc.arginfo = QCOM_SCM_ARGS(7, QCOM_SCM_RO, QCOM_SCM_VAL,
+				     QCOM_SCM_RO, QCOM_SCM_VAL, QCOM_SCM_RO,
+				     QCOM_SCM_VAL, QCOM_SCM_VAL);
+
+	ret = qcom_scm_call(dev, QCOM_SCM_SVC_MP,
+			    QCOM_MEM_PROT_ASSIGN_ID,
+			    &desc, &res);
+
+	return ret ? : res.a1;
+}
+
 int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id, u32 spare)
 {
 	struct qcom_scm_desc desc = {0};

drivers/firmware/qcom_scm.c

@@ -40,6 +40,19 @@ struct qcom_scm {
 	struct reset_controller_dev reset;
 };
 
+struct qcom_scm_current_perm_info {
+	__le32 vmid;
+	__le32 perm;
+	__le64 ctx;
+	__le32 ctx_size;
+	__le32 unused;
+};
+
+struct qcom_scm_mem_map_info {
+	__le64 mem_addr;
+	__le64 mem_size;
+};
+
 static struct qcom_scm *__scm;
 
 static int qcom_scm_clk_enable(void)
@@ -348,6 +361,88 @@ int qcom_scm_set_remote_state(u32 state, u32 id)
 }
 EXPORT_SYMBOL(qcom_scm_set_remote_state);
 
+/**
+ * qcom_scm_assign_mem() - Make a secure call to reassign memory ownership
+ * @mem_addr: mem region whose ownership need to be reassigned
+ * @mem_sz:   size of the region.
+ * @srcvm:    vmid for current set of owners, each set bit in
+ *            flag indicate a unique owner
+ * @newvm:    array having new owners and corrsponding permission
+ *            flags
+ * @dest_cnt: number of owners in next set.
+ *
+ * Return negative errno on failure, 0 on success, with @srcvm updated.
+ */
+int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
+			unsigned int *srcvm,
+			struct qcom_scm_vmperm *newvm, int dest_cnt)
+{
+	struct qcom_scm_current_perm_info *destvm;
+	struct qcom_scm_mem_map_info *mem_to_map;
+	phys_addr_t mem_to_map_phys;
+	phys_addr_t dest_phys;
+	phys_addr_t ptr_phys;
+	size_t mem_to_map_sz;
+	size_t dest_sz;
+	size_t src_sz;
+	size_t ptr_sz;
+	int next_vm;
+	__le32 *src;
+	void *ptr;
+	int ret;
+	int len;
+	int i;
+
+	src_sz = hweight_long(*srcvm) * sizeof(*src);
+	mem_to_map_sz = sizeof(*mem_to_map);
+	dest_sz = dest_cnt * sizeof(*destvm);
+	ptr_sz = ALIGN(src_sz, SZ_64) + ALIGN(mem_to_map_sz, SZ_64) +
+			ALIGN(dest_sz, SZ_64);
+
+	ptr = dma_alloc_coherent(__scm->dev, ptr_sz, &ptr_phys, GFP_KERNEL);
+	if (!ptr)
+		return -ENOMEM;
+
+	/* Fill source vmid detail */
+	src = ptr;
+	len = hweight_long(*srcvm);
+	for (i = 0; i < len; i++) {
+		src[i] = cpu_to_le32(ffs(*srcvm) - 1);
+		*srcvm ^= 1 << (ffs(*srcvm) - 1);
+	}
+
+	/* Fill details of mem buff to map */
+	mem_to_map = ptr + ALIGN(src_sz, SZ_64);
+	mem_to_map_phys = ptr_phys + ALIGN(src_sz, SZ_64);
+	mem_to_map[0].mem_addr = cpu_to_le64(mem_addr);
+	mem_to_map[0].mem_size = cpu_to_le64(mem_sz);
+
+	next_vm = 0;
+	/* Fill details of next vmid detail */
+	destvm = ptr + ALIGN(mem_to_map_sz, SZ_64) + ALIGN(src_sz, SZ_64);
+	dest_phys = ptr_phys + ALIGN(mem_to_map_sz, SZ_64) + ALIGN(src_sz, SZ_64);
+	for (i = 0; i < dest_cnt; i++) {
+		destvm[i].vmid = cpu_to_le32(newvm[i].vmid);
+		destvm[i].perm = cpu_to_le32(newvm[i].perm);
+		destvm[i].ctx = 0;
+		destvm[i].ctx_size = 0;
+		next_vm |= BIT(newvm[i].vmid);
+	}
+
+	ret = __qcom_scm_assign_mem(__scm->dev, mem_to_map_phys, mem_to_map_sz,
+				    ptr_phys, src_sz, dest_phys, dest_sz);
+	dma_free_coherent(__scm->dev, ALIGN(ptr_sz, SZ_64), ptr, ptr_phys);
+	if (ret) {
+		dev_err(__scm->dev,
+			"Assign memory protection call failed %d.\n", ret);
+		return -EINVAL;
+	}
+
+	*srcvm = next_vm;
+	return 0;
+}
+EXPORT_SYMBOL(qcom_scm_assign_mem);
+
 static int qcom_scm_probe(struct platform_device *pdev)
 {
 	struct qcom_scm *scm;

drivers/firmware/qcom_scm.h

@@ -95,5 +95,10 @@ extern int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
 					     size_t *size);
 extern int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr,
 					     u32 size, u32 spare);
+#define QCOM_MEM_PROT_ASSIGN_ID	0x16
+extern int  __qcom_scm_assign_mem(struct device *dev,
+				  phys_addr_t mem_region, size_t mem_sz,
+				  phys_addr_t src, size_t src_sz,
+				  phys_addr_t dest, size_t dest_sz);
 
 #endif

include/linux/qcom_scm.h

@@ -23,6 +23,19 @@ struct qcom_scm_hdcp_req {
 	u32 val;
 };
 
+struct qcom_scm_vmperm {
+	int vmid;
+	int perm;
+};
+
+#define QCOM_SCM_VMID_HLOS       0x3
+#define QCOM_SCM_VMID_MSS_MSA    0xF
+#define QCOM_SCM_PERM_READ       0x4
+#define QCOM_SCM_PERM_WRITE      0x2
+#define QCOM_SCM_PERM_EXEC       0x1
+#define QCOM_SCM_PERM_RW (QCOM_SCM_PERM_READ | QCOM_SCM_PERM_WRITE)
+#define QCOM_SCM_PERM_RWX (QCOM_SCM_PERM_RW | QCOM_SCM_PERM_EXEC)
+
 #if IS_ENABLED(CONFIG_QCOM_SCM)
 extern int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
 extern int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
@@ -37,6 +50,9 @@ extern int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr,
 				  phys_addr_t size);
 extern int qcom_scm_pas_auth_and_reset(u32 peripheral);
 extern int qcom_scm_pas_shutdown(u32 peripheral);
+extern int qcom_scm_assign_mem(phys_addr_t mem_addr, size_t mem_sz,
+			       unsigned int *src, struct qcom_scm_vmperm *newvm,
+			       int dest_cnt);
 extern void qcom_scm_cpu_power_down(u32 flags);
 extern u32 qcom_scm_get_version(void);
 extern int qcom_scm_set_remote_state(u32 state, u32 id);