IB/ipath: EEPROM support for 7220 devices, robustness improvements, cleanup

Add support for reading newer card's EEPROMs while continuing to support
older EEPROMs.

Also, add support for the temperature sensor if present.
Signed-off-by: Michael Albaugh <Michael.Albaugh@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

drivers/infiniband/hw/ipath/ipath_kernel.h

@@ -654,8 +654,9 @@ struct ipath_devdata {
 	 * Register bits for selecting i2c direction and values, used for
 	 * I2C serial flash.
 	 */
-	u16 ipath_gpio_sda_num;
-	u16 ipath_gpio_scl_num;
+	u8 ipath_gpio_sda_num;
+	u8 ipath_gpio_scl_num;
+	u8 ipath_i2c_chain_type;
 	u64 ipath_gpio_sda;
 	u64 ipath_gpio_scl;
 
@@ -906,6 +907,8 @@ void ipath_release_user_pages(struct page **, size_t);
 void ipath_release_user_pages_on_close(struct page **, size_t);
 int ipath_eeprom_read(struct ipath_devdata *, u8, void *, int);
 int ipath_eeprom_write(struct ipath_devdata *, u8, const void *, int);
+int ipath_tempsense_read(struct ipath_devdata *, u8 regnum);
+int ipath_tempsense_write(struct ipath_devdata *, u8 regnum, u8 data);
 
 /* these are used for the registers that vary with port */
 void ipath_write_kreg_port(const struct ipath_devdata *, ipath_kreg,

drivers/infiniband/hw/ipath/ipath_sysfs.c

@@ -943,6 +943,7 @@ static ssize_t store_rx_polinv_enb(struct device *dev,
 bail:
 	return ret;
 }
+
 /*
  * Get/Set RX lane-reversal enable. 0=no, 1=yes.
  */
@@ -997,6 +998,75 @@ static struct attribute_group driver_attr_group = {
 	.attrs = driver_attributes
 };
 
+static ssize_t store_tempsense(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf,
+			       size_t count)
+{
+	struct ipath_devdata *dd = dev_get_drvdata(dev);
+	int ret, stat;
+	u16 val;
+
+	ret = ipath_parse_ushort(buf, &val);
+	if (ret <= 0) {
+		ipath_dev_err(dd, "attempt to set invalid tempsense config\n");
+		goto bail;
+	}
+	/* If anything but the highest limit, enable T_CRIT_A "interrupt" */
+	stat = ipath_tempsense_write(dd, 9, (val == 0x7f7f) ? 0x80 : 0);
+	if (stat) {
+		ipath_dev_err(dd, "Unable to set tempsense config\n");
+		ret = -1;
+		goto bail;
+	}
+	stat = ipath_tempsense_write(dd, 0xB, (u8) (val & 0xFF));
+	if (stat) {
+		ipath_dev_err(dd, "Unable to set local Tcrit\n");
+		ret = -1;
+		goto bail;
+	}
+	stat = ipath_tempsense_write(dd, 0xD, (u8) (val >> 8));
+	if (stat) {
+		ipath_dev_err(dd, "Unable to set remote Tcrit\n");
+		ret = -1;
+		goto bail;
+	}
+
+bail:
+	return ret;
+}
+
+/*
+ * dump tempsense regs. in decimal, to ease shell-scripts.
+ */
+static ssize_t show_tempsense(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	struct ipath_devdata *dd = dev_get_drvdata(dev);
+	int ret;
+	int idx;
+	u8 regvals[8];
+
+	ret = -ENXIO;
+	for (idx = 0; idx < 8; ++idx) {
+		if (idx == 6)
+			continue;
+		ret = ipath_tempsense_read(dd, idx);
+		if (ret < 0)
+			break;
+		regvals[idx] = ret;
+	}
+	if (idx == 8)
+		ret = scnprintf(buf, PAGE_SIZE, "%d %d %02X %02X %d %d\n",
+			*(signed char *)(regvals),
+			*(signed char *)(regvals + 1),
+			regvals[2], regvals[3],
+			*(signed char *)(regvals + 5),
+			*(signed char *)(regvals + 7));
+	return ret;
+}
+
 struct attribute_group *ipath_driver_attr_groups[] = {
 	&driver_attr_group,
 	NULL,
@@ -1025,6 +1095,8 @@ static DEVICE_ATTR(jint_max_packets, S_IWUSR | S_IRUGO,
 		   show_jint_max_packets, store_jint_max_packets);
 static DEVICE_ATTR(jint_idle_ticks, S_IWUSR | S_IRUGO,
 		   show_jint_idle_ticks, store_jint_idle_ticks);
+static DEVICE_ATTR(tempsense, S_IWUSR | S_IRUGO,
+		   show_tempsense, store_tempsense);
 
 static struct attribute *dev_attributes[] = {
 	&dev_attr_guid.attr,
@@ -1044,6 +1116,7 @@ static struct attribute *dev_attributes[] = {
 	&dev_attr_rx_pol_inv.attr,
 	&dev_attr_led_override.attr,
 	&dev_attr_logged_errors.attr,
+	&dev_attr_tempsense.attr,
 	&dev_attr_localbus_info.attr,
 	NULL
 };