Commit da92110d authored by Aravind Gopalakrishnan's avatar Aravind Gopalakrishnan Committed by Borislav Petkov

EDAC, amd64_edac: Extend scrub rate support to F15hM60h

The scrub rate control register has moved to function 2 in PCI config
space and is at a different offset on family 0x15, models 0x60 and
later. The minimum recommended scrub rate has also changed. (Refer to
D18F2x1c9_dct[1:0][DramScrub] in Fam15hM60h BKDG).

Adjust set_scrub_rate() and get_scrub_rate() functions to accommodate
this.

Tested on F15hM60h, Fam15h, models 00h-0fh and Fam10h systems.
Signed-off-by: default avatarAravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1443440593-2316-2-git-send-email-Aravind.Gopalakrishnan@amd.com
[ Cleanup conditionals. ]
Signed-off-by: default avatarBorislav Petkov <bp@suse.de>
parent d0c9c930
......@@ -173,7 +173,7 @@ static inline int amd64_read_dct_pci_cfg(struct amd64_pvt *pvt, u8 dct,
* scan the scrub rate mapping table for a close or matching bandwidth value to
* issue. If requested is too big, then use last maximum value found.
*/
static int __set_scrub_rate(struct pci_dev *ctl, u32 new_bw, u32 min_rate)
static int __set_scrub_rate(struct amd64_pvt *pvt, u32 new_bw, u32 min_rate)
{
u32 scrubval;
int i;
......@@ -201,7 +201,14 @@ static int __set_scrub_rate(struct pci_dev *ctl, u32 new_bw, u32 min_rate)
scrubval = scrubrates[i].scrubval;
pci_write_bits32(ctl, SCRCTRL, scrubval, 0x001F);
if (pvt->fam == 0x15 && pvt->model == 0x60) {
f15h_select_dct(pvt, 0);
pci_write_bits32(pvt->F2, F15H_M60H_SCRCTRL, scrubval, 0x001F);
f15h_select_dct(pvt, 1);
pci_write_bits32(pvt->F2, F15H_M60H_SCRCTRL, scrubval, 0x001F);
} else {
pci_write_bits32(pvt->F3, SCRCTRL, scrubval, 0x001F);
}
if (scrubval)
return scrubrates[i].bandwidth;
......@@ -217,11 +224,15 @@ static int set_scrub_rate(struct mem_ctl_info *mci, u32 bw)
if (pvt->fam == 0xf)
min_scrubrate = 0x0;
if (pvt->fam == 0x15) {
/* Erratum #505 */
if (pvt->fam == 0x15 && pvt->model < 0x10)
if (pvt->model < 0x10)
f15h_select_dct(pvt, 0);
return __set_scrub_rate(pvt->F3, bw, min_scrubrate);
if (pvt->model == 0x60)
min_scrubrate = 0x6;
}
return __set_scrub_rate(pvt, bw, min_scrubrate);
}
static int get_scrub_rate(struct mem_ctl_info *mci)
......@@ -230,10 +241,14 @@ static int get_scrub_rate(struct mem_ctl_info *mci)
u32 scrubval = 0;
int i, retval = -EINVAL;
if (pvt->fam == 0x15) {
/* Erratum #505 */
if (pvt->fam == 0x15 && pvt->model < 0x10)
if (pvt->model < 0x10)
f15h_select_dct(pvt, 0);
if (pvt->model == 0x60)
amd64_read_pci_cfg(pvt->F2, F15H_M60H_SCRCTRL, &scrubval);
} else
amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval);
scrubval = scrubval & 0x001F;
......
......@@ -255,6 +255,8 @@
#define DCT_SEL_HI 0x114
#define F15H_M60H_SCRCTRL 0x1C8
/*
* Function 3 - Misc Control
*/
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment