net: dsa: qca8k: Allow overwriting CPU port setting

commit 9bb2289f upstream.

Implement adjust_link function that allows to overwrite default CPU port
setting using fixed-link device tree subnode.
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/net/dsa/qca8k.c

@@ -589,6 +589,47 @@ qca8k_setup(struct dsa_switch *ds)
 	return 0;
 }
 
+static void
+qca8k_adjust_link(struct dsa_switch *ds, int port, struct phy_device *phy)
+{
+	struct qca8k_priv *priv = ds->priv;
+	u32 reg;
+
+	/* Force fixed-link setting for CPU port, skip others. */
+	if (!phy_is_pseudo_fixed_link(phy))
+		return;
+
+	/* Set port speed */
+	switch (phy->speed) {
+	case 10:
+		reg = QCA8K_PORT_STATUS_SPEED_10;
+		break;
+	case 100:
+		reg = QCA8K_PORT_STATUS_SPEED_100;
+		break;
+	case 1000:
+		reg = QCA8K_PORT_STATUS_SPEED_1000;
+		break;
+	default:
+		dev_dbg(priv->dev, "port%d link speed %dMbps not supported.\n",
+			port, phy->speed);
+		return;
+	}
+
+	/* Set duplex mode */
+	if (phy->duplex == DUPLEX_FULL)
+		reg |= QCA8K_PORT_STATUS_DUPLEX;
+
+	/* Force flow control */
+	if (dsa_is_cpu_port(ds, port))
+		reg |= QCA8K_PORT_STATUS_RXFLOW | QCA8K_PORT_STATUS_TXFLOW;
+
+	/* Force link down before changing MAC options */
+	qca8k_port_set_status(priv, port, 0);
+	qca8k_write(priv, QCA8K_REG_PORT_STATUS(port), reg);
+	qca8k_port_set_status(priv, port, 1);
+}
+
 static int
 qca8k_phy_read(struct dsa_switch *ds, int phy, int regnum)
 {
@@ -918,6 +959,7 @@ qca8k_get_tag_protocol(struct dsa_switch *ds)
 static struct dsa_switch_ops qca8k_switch_ops = {
 	.get_tag_protocol	= qca8k_get_tag_protocol,
 	.setup			= qca8k_setup,
+	.adjust_link            = qca8k_adjust_link,
 	.get_strings		= qca8k_get_strings,
 	.phy_read		= qca8k_phy_read,
 	.phy_write		= qca8k_phy_write,
@@ -950,6 +992,7 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
 		return -ENOMEM;
 
 	priv->bus = mdiodev->bus;
+	priv->dev = &mdiodev->dev;
 
 	/* read the switches ID register */
 	id = qca8k_read(priv, QCA8K_REG_MASK_CTRL);

drivers/net/dsa/qca8k.h

@@ -169,6 +169,7 @@ struct qca8k_priv {
 	struct ar8xxx_port_status port_sts[QCA8K_NUM_PORTS];
 	struct dsa_switch *ds;
 	struct mutex reg_mutex;
+	struct device *dev;
 };
 
 struct qca8k_mib_desc {