isci: Added support for C0 to SCU Driver

C0 silicon updates the pci revision id and requires new AFE parameters
for phy signal integrity.  Support for previous silicon revisions is
deprecated (it's also broken for the theoretical case of multiple
controllers at different silicon revisions, all the more reason to get
it removed as soon as possible)
Signed-off-by: Adam Gruchala <adam.gruchala@intel.com>
[fixed up deprecated silicon support]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

drivers/scsi/isci/firmware/create_fw.h

@@ -65,10 +65,10 @@ static const int max_num_concurrent_dev_spin_up = 1;
 static const int enable_ssc;
 
 /* AFE_TX_AMP_CONTROL */
-static const unsigned int afe_tx_amp_control0 = 0x000e7c03;
-static const unsigned int afe_tx_amp_control1 = 0x000e7c03;
-static const unsigned int afe_tx_amp_control2 = 0x000e7c03;
-static const unsigned int afe_tx_amp_control3 = 0x000e7c03;
+static const unsigned int afe_tx_amp_control0 = 0x000bdd08;
+static const unsigned int afe_tx_amp_control1 = 0x000ffc00;
+static const unsigned int afe_tx_amp_control2 = 0x000b7c09;
+static const unsigned int afe_tx_amp_control3 = 0x000afc6e;
 
 static const char blob_name[] = "isci_firmware.bin";
 static const char sig[] = "ISCUOEMB";

drivers/scsi/isci/host.c

@@ -2070,13 +2070,13 @@ static void scic_sds_controller_afe_initialization(struct scic_sds_controller *s
 		writel(0x00005500, &scic->scu_registers->afe.afe_bias_control);
 	else if (is_a2())
 		writel(0x00005A00, &scic->scu_registers->afe.afe_bias_control);
-	else if (is_b0())
+	else if (is_b0() || is_c0())
 		writel(0x00005F00, &scic->scu_registers->afe.afe_bias_control);
 
 	udelay(AFE_REGISTER_WRITE_DELAY);
 
 	/* Enable PLL */
-	if (is_b0())
+	if (is_b0() || is_c0())
 		writel(0x80040A08, &scic->scu_registers->afe.afe_pll_control0);
 	else
 		writel(0x80040908, &scic->scu_registers->afe.afe_pll_control0);
@@ -2102,6 +2102,16 @@ static void scic_sds_controller_afe_initialization(struct scic_sds_controller *s
 			 /* Configure transmitter SSC parameters */
 			writel(0x00030000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control);
 			udelay(AFE_REGISTER_WRITE_DELAY);
+		} else if (is_c0()) {
+			 /* Configure transmitter SSC parameters */
+			writel(0x0003000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control);
+			udelay(AFE_REGISTER_WRITE_DELAY);
+
+			/*
+			 * All defaults, except the Receive Word Alignament/Comma Detect
+			 * Enable....(0xe800) */
+			writel(0x00004500, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0);
+			udelay(AFE_REGISTER_WRITE_DELAY);
 		} else {
 			/*
 			 * All defaults, except the Receive Word Alignament/Comma Detect
@@ -2120,15 +2130,23 @@ static void scic_sds_controller_afe_initialization(struct scic_sds_controller *s
 			writel(0x000003D4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
 		else if (is_a2())
 			writel(0x000003F0, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
-		else {
+		else if (is_b0()) {
 			 /* Power down TX and RX (PWRDNTX and PWRDNRX) */
-			writel(0x000003d7, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+			writel(0x000003D7, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+			udelay(AFE_REGISTER_WRITE_DELAY);
+
+			/*
+			 * Power up TX and RX out from power down (PWRDNTX and PWRDNRX)
+			 * & increase TX int & ext bias 20%....(0xe85c) */
+			writel(0x000003D4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+		} else {
+			writel(0x000001E7, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
 			udelay(AFE_REGISTER_WRITE_DELAY);
 
 			/*
 			 * Power up TX and RX out from power down (PWRDNTX and PWRDNRX)
 			 * & increase TX int & ext bias 20%....(0xe85c) */
-			writel(0x000003d4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+			writel(0x000001E4, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
 		}
 		udelay(AFE_REGISTER_WRITE_DELAY);
 
@@ -2149,12 +2167,22 @@ static void scic_sds_controller_afe_initialization(struct scic_sds_controller *s
 			writel(0x3F09983F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
 		else if (is_a2())
 			writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
-		else {
+		else if (is_b0()) {
 			writel(0x3F11103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
 			udelay(AFE_REGISTER_WRITE_DELAY);
+			/* Enable TX equalization (0xe824) */
+			writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control);
+		} else {
+			writel(0x0140DF0F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control1);
+			udelay(AFE_REGISTER_WRITE_DELAY);
+
+			writel(0x3F6F103F, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
+			udelay(AFE_REGISTER_WRITE_DELAY);
+
 			/* Enable TX equalization (0xe824) */
 			writel(0x00040000, &scic->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control);
 		}
+
 		udelay(AFE_REGISTER_WRITE_DELAY);
 
 		writel(oem_phy->afe_tx_amp_control0,

drivers/scsi/isci/host.h

@@ -675,6 +675,7 @@ enum {
 	ISCI_SI_REVA0,
 	ISCI_SI_REVA2,
 	ISCI_SI_REVB0,
+	ISCI_SI_REVC0
 };
 
 extern int isci_si_rev;
@@ -691,7 +692,12 @@ static inline bool is_a2(void)
 
 static inline bool is_b0(void)
 {
-	return isci_si_rev > ISCI_SI_REVA2;
+	return isci_si_rev == ISCI_SI_REVB0;
+}
+
+static inline bool is_c0(void)
+{
+	return isci_si_rev > ISCI_SI_REVB0;
 }
 
 void scic_sds_controller_post_request(struct scic_sds_controller *scic,

drivers/scsi/isci/init.c

@@ -437,9 +437,6 @@ static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id)
 
 static void check_si_rev(struct pci_dev *pdev)
 {
-	if (num_controllers(pdev) > 1)
-		isci_si_rev = ISCI_SI_REVB0;
-	else {
 	switch (pdev->revision) {
 	case 0:
 	case 1:
@@ -448,16 +445,19 @@ static void check_si_rev(struct pci_dev *pdev)
 	case 3:
 		isci_si_rev = ISCI_SI_REVA2;
 		break;
-		default:
 	case 4:
 		isci_si_rev = ISCI_SI_REVB0;
 		break;
-		}
+	default:
+	case 5:
+		isci_si_rev = ISCI_SI_REVC0;
+		break;
 	}
 
 	dev_info(&pdev->dev, "driver configured for %s silicon (rev: %d)\n",
 		 isci_si_rev == ISCI_SI_REVA0 ? "A0" :
-		 isci_si_rev == ISCI_SI_REVA2 ? "A2" : "B0", pdev->revision);
+		 isci_si_rev == ISCI_SI_REVA2 ? "A2" :
+		 isci_si_rev == ISCI_SI_REVB0 ? "B0" : "C0", pdev->revision);
 
 }
 

drivers/scsi/isci/probe_roms.c

@@ -136,6 +136,7 @@ enum sci_status isci_parse_oem_parameters(union scic_oem_parameters *oem_params,
 struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmware *fw)
 {
 	struct isci_orom *orom = NULL, *data;
+	int i, j;
 
 	if (request_firmware(&fw, ISCI_FW_NAME, &pdev->dev) != 0)
 		return NULL;
@@ -155,6 +156,20 @@ struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmw
 
 	memcpy(orom, fw->data, fw->size);
 
+	/*
+	 * deprecated: override default amp_control for pre-preproduction
+	 * silicon revisions
+	 */
+	if (isci_si_rev <= ISCI_SI_REVB0)
+		goto out;
+
+	for (i = 0; i < ARRAY_SIZE(orom->ctrl); i++)
+		for (j = 0; j < ARRAY_SIZE(orom->ctrl[i].phys); j++) {
+			orom->ctrl[i].phys[j].afe_tx_amp_control0 = 0xe7c03;
+			orom->ctrl[i].phys[j].afe_tx_amp_control1 = 0xe7c03;
+			orom->ctrl[i].phys[j].afe_tx_amp_control2 = 0xe7c03;
+			orom->ctrl[i].phys[j].afe_tx_amp_control3 = 0xe7c03;
+		}
  out:
 	release_firmware(fw);
 

firmware/isci/isci_firmware.bin.ihex

 :10000000495343554F454D42E80018100002000087
 :1000100000000000000000000101000000000000DE
-:10002000FFFFCF5F01000000037C0E00037C0E0089
-:10003000037C0E00037C0E00FFFFCF5F0100000079
-:10004000037C0E00037C0E00037C0E00037C0E007C
-:10005000FFFFCF5F01000000037C0E00037C0E0059
-:10006000037C0E00037C0E00FFFFCF5F0100000049
-:10007000037C0E00037C0E00037C0E00037C0E004C
+:10002000FFFFCF5F0100000008DD0B0000FC0F00A8
+:10003000097C0B006EFC0A00FFFFCF5F010000008F
+:1000400008DD0B0000FC0F00097C0B006EFC0A00B1
+:10005000FFFFCF5F0100000008DD0B0000FC0F0078
+:10006000097C0B006EFC0A00FFFFCF5F010000005F
+:1000700008DD0B0000FC0F00097C0B006EFC0A0081
 :100080000101000000000000FFFFCF5F0200000040
-:10009000037C0E00037C0E00037C0E00037C0E002C
-:1000A000FFFFCF5F02000000037C0E00037C0E0008
-:1000B000037C0E00037C0E00FFFFCF5F02000000F8
-:1000C000037C0E00037C0E00037C0E00037C0E00FC
-:1000D000FFFFCF5F02000000037C0E00037C0E00D8
-:0800E000037C0E00037C0E00FE
+:1000900008DD0B0000FC0F00097C0B006EFC0A0061
+:1000A000FFFFCF5F0200000008DD0B0000FC0F0027
+:1000B000097C0B006EFC0A00FFFFCF5F020000000E
+:1000C00008DD0B0000FC0F00097C0B006EFC0A0031
+:1000D000FFFFCF5F0200000008DD0B0000FC0F00F7
+:0800E000097C0B006EFC0A0014
 :00000001FF