Skip to content

L
linux
Commit dbb3cc44 authored by Jeff Dike's avatar Jeff Dike
Browse files
Options

Merge jdike.stearns.org:linux/build-2.5/ 

into uml.karaya.com:/home/jdike/linux/2.5/build-2.5
parents eec91b48 8ed83bd9
Show whitespace changes
Inline Side-by-side
Showing with 689 additions and 97 deletions
arch/um/Kconfig
View file @ dbb3cc44
...@@ -30,14 +30,6 @@ config RWSEM_GENERIC_SPINLOCK ...@@ -30,14 +30,6 @@ config RWSEM_GENERIC_SPINLOCK
bool bool
default y default y
config MODE_TT
bool
default y
config MODE_SKAS
bool
default y
menu "Code maturity level options" menu "Code maturity level options"
config EXPERIMENTAL config EXPERIMENTAL
...@@ -48,6 +40,37 @@ endmenu ...@@ -48,6 +40,37 @@ endmenu
menu "General Setup" menu "General Setup"
config MODE_TT
bool "Tracing thread support"
default y
help
This option controls whether tracing thread support is compiled
into UML. Normally, this should be set to Y. If you intend to
use only skas mode (and the host has the skas patch applied to it),
then it is OK to say N here.
config STATIC_LINK
bool "Force a static link"
default n
depends on !MODE_TT
help
If CONFIG_MODE_TT is disabled, then this option gives you the ability
to force a static link of UML. Normally, if only skas mode is built
in to UML, it will be linked as a shared binary. This is inconvenient
for use in a chroot jail. So, if you intend to run UML inside a
chroot, and you disable CONFIG_MODE_TT, you probably want to say Y
here.
config MODE_SKAS
bool "Separate Kernel Address Space support"
default y
help
This option controls whether skas (separate kernel address space)
support is compiled in. If you have applied the skas patch to the
host, then you certainly want to say Y here (and consider saying N
to CONFIG_MODE_TT). Otherwise, it is safe to say Y. Disabling this
option will shrink the UML binary slightly.
config NET config NET
bool "Networking support" bool "Networking support"
...@@ -232,6 +255,10 @@ config DEBUGSYM ...@@ -232,6 +255,10 @@ config DEBUGSYM
If you're truly short on disk space or don't expect to report any If you're truly short on disk space or don't expect to report any
bugs back to the UML developers, say N, otherwise say Y. bugs back to the UML developers, say N, otherwise say Y.
config FRAME_POINTER
bool
default y if DEBUGSYM
config PT_PROXY config PT_PROXY
bool "Enable ptrace proxy" bool "Enable ptrace proxy"
depends on XTERM_CHAN && DEBUGSYM depends on XTERM_CHAN && DEBUGSYM
......
arch/um/Makefile
View file @ dbb3cc44
...@@ -6,9 +6,6 @@ ...@@ -6,9 +6,6 @@
ARCH_DIR = arch/um ARCH_DIR = arch/um
OS := $(shell uname -s) OS := $(shell uname -s)
EXTRAVERSION := $(EXTRAVERSION)-1um
include/linux/version.h: arch/$(ARCH)/Makefile
# Recalculate MODLIB to reflect the EXTRAVERSION changes (via KERNELRELEASE) # Recalculate MODLIB to reflect the EXTRAVERSION changes (via KERNELRELEASE)
# The way the toplevel Makefile is written EXTRAVERSION is not supposed # The way the toplevel Makefile is written EXTRAVERSION is not supposed
# to be changed outside the toplevel Makefile, but recalculating MODLIB is # to be changed outside the toplevel Makefile, but recalculating MODLIB is
...@@ -21,17 +18,34 @@ CFLAGS := $(subst -fomit-frame-pointer,,$(CFLAGS)) ...@@ -21,17 +18,34 @@ CFLAGS := $(subst -fomit-frame-pointer,,$(CFLAGS))
endif endif
CFLAGS-$(CONFIG_DEBUGSYM) += -g CFLAGS-$(CONFIG_DEBUGSYM) += -g
CFLAGS-$(CONFIG_GCOV) += -fprofile-arcs -ftest-coverage
CFLAGS-$(CONFIG_GPROF) += $(PROFILE)
LINK-$(CONFIG_GPROF) += $(PROFILE) -Wl,--wrap,__monstartup
core-y += $(ARCH_DIR)/kernel/ \ core-y += $(ARCH_DIR)/kernel/ \
$(ARCH_DIR)/drivers/ \ $(ARCH_DIR)/drivers/ \
$(ARCH_DIR)/sys-$(SUBARCH)/ $(ARCH_DIR)/sys-$(SUBARCH)/
# Have to precede the include because the included Makefiles reference them.
SYMLINK_HEADERS = include/asm-um/archparam.h include/asm-um/system.h \
include/asm-um/sigcontext.h include/asm-um/processor.h \
include/asm-um/ptrace.h include/asm-um/arch-signal.h
ARCH_SYMLINKS = include/asm-um/arch $(ARCH_DIR)/include/sysdep $(ARCH_DIR)/os \
$(SYMLINK_HEADERS) $(ARCH_DIR)/include/uml-config.h
GEN_HEADERS += $(ARCH_DIR)/include/task.h $(ARCH_DIR)/include/kern_constants.h
include $(ARCH_DIR)/Makefile-$(SUBARCH)
include $(ARCH_DIR)/Makefile-os-$(OS)
MAKEFILE-$(CONFIG_MODE_TT) += Makefile-tt
MAKEFILE-$(CONFIG_MODE_SKAS) += Makefile-skas
ifneq ($(MAKEFILE-y),)
include $(addprefix $(ARCH_DIR)/,$(MAKEFILE-y))
endif
EXTRAVERSION := $(EXTRAVERSION)-1um
ARCH_INCLUDE = -I$(ARCH_DIR)/include ARCH_INCLUDE = -I$(ARCH_DIR)/include
MODE_INCLUDE = -I$(ARCH_DIR)/kernel/tt/include \
-I$(ARCH_DIR)/kernel/skas/include
# -Derrno=kernel_errno - This turns all kernel references to errno into # -Derrno=kernel_errno - This turns all kernel references to errno into
# kernel_errno to separate them from the libc errno. This allows -fno-common # kernel_errno to separate them from the libc errno. This allows -fno-common
...@@ -46,23 +60,11 @@ LINK_WRAPS = -Wl,--wrap,malloc -Wl,--wrap,free -Wl,--wrap,calloc ...@@ -46,23 +60,11 @@ LINK_WRAPS = -Wl,--wrap,malloc -Wl,--wrap,free -Wl,--wrap,calloc
SIZE = (($(CONFIG_NEST_LEVEL) + $(CONFIG_KERNEL_HALF_GIGS)) * 0x20000000) SIZE = (($(CONFIG_NEST_LEVEL) + $(CONFIG_KERNEL_HALF_GIGS)) * 0x20000000)
SYMLINK_HEADERS = include/asm-um/archparam.h include/asm-um/system.h \
include/asm-um/sigcontext.h include/asm-um/processor.h \
include/asm-um/ptrace.h include/asm-um/arch-signal.h
ARCH_SYMLINKS = include/asm-um/arch $(ARCH_DIR)/include/sysdep $(ARCH_DIR)/os \
$(SYMLINK_HEADERS) $(ARCH_DIR)/include/uml-config.h
ifeq ($(CONFIG_MODE_SKAS), y) ifeq ($(CONFIG_MODE_SKAS), y)
GEN_HEADERS = $(ARCH_DIR)/kernel/skas/include/skas_ptregs.h
$(SYS_HEADERS) : $(ARCH_DIR)/kernel/skas/include/skas_ptregs.h $(SYS_HEADERS) : $(ARCH_DIR)/kernel/skas/include/skas_ptregs.h
endif endif
GEN_HEADERS += $(ARCH_DIR)/include/task.h $(ARCH_DIR)/include/kern_constants.h include/linux/version.h: arch/$(ARCH)/Makefile
include $(ARCH_DIR)/Makefile-$(SUBARCH)
include $(ARCH_DIR)/Makefile-os-$(OS)
$(ARCH_DIR)/vmlinux.lds.S : $(ARCH_DIR)/vmlinux.lds.S :
touch $@ touch $@
...@@ -73,16 +75,44 @@ LDFLAGS_vmlinux = -r ...@@ -73,16 +75,44 @@ LDFLAGS_vmlinux = -r
vmlinux: $(ARCH_DIR)/main.o vmlinux: $(ARCH_DIR)/main.o
$(ARCH_DIR)/uml.lds.s : $(ARCH_DIR)/uml.lds.S scripts FORCE # These aren't in Makefile-tt because they are needed in the !CONFIG_MODE_TT +
$(call if_changed_dep,as_s_S) # CONFIG_MODE_SKAS + CONFIG_STATIC_LINK case.
LINK_TT = -static
LD_SCRIPT_TT := uml.lds.s
ifeq ($(CONFIG_STATIC_LINK),y)
LINK-y += $(LINK_TT)
LD_SCRIPT-y := $(LD_SCRIPT_TT)
else
ifeq ($(CONFIG_MODE_TT),y)
LINK-y += $(LINK_TT)
LD_SCRIPT-y := $(LD_SCRIPT_TT)
else
ifeq ($(CONFIG_MODE_SKAS),y)
LINK-y += $(LINK_SKAS)
LD_SCRIPT-y := $(LD_SCRIPT_SKAS)
endif
endif
endif
AFLAGS_uml.lds.o = -U$(SUBARCH) -DSTART=$$(($(TOP_ADDR) - $(SIZE))) \ CPP_MODE_TT := $(shell [ "$(CONFIG_MODE_TT)" = "y" ] && echo -DMODE_TT)
-DELF_ARCH=$(ELF_ARCH) -DELF_FORMAT=\"$(ELF_FORMAT)\" -P -C -Uum CONFIG_KERNEL_STACK_ORDER ?= 2
STACK_SIZE := $(shell echo $$[ 4096 * (1 << $(CONFIG_KERNEL_STACK_ORDER)) ] )
linux: $(ARCH_DIR)/uml.lds.s vmlinux AFLAGS_$(LD_SCRIPT-y:.s=).o = -U$(SUBARCH) \
$(CC) -Wl,-T,$(ARCH_DIR)/uml.lds.s -static $(LINK-y) $(LINK_WRAPS) \ -DSTART=$$(($(TOP_ADDR) - $(SIZE))) -DELF_ARCH=$(ELF_ARCH) \
-o linux $(ARCH_DIR)/main.o vmlinux -L/usr/lib -lutil -DELF_FORMAT=\"$(ELF_FORMAT)\" $(CPP_MODE_TT) \
-DKERNEL_STACK_SIZE=$(STACK_SIZE) -P -C -Uum
LD_SCRIPT-y := $(ARCH_DIR)/$(LD_SCRIPT-y)
$(LD_SCRIPT-y) : $(LD_SCRIPT-y:.s=.S) scripts FORCE
$(call if_changed_dep,as_s_S)
linux: vmlinux $(LD_SCRIPT-y)
$(CC) -Wl,-T,$(LD_SCRIPT-y) $(LINK-y) $(LINK_WRAPS) \
-o linux $(ARCH_DIR)/main.o vmlinux -L/usr/lib -lutil
USER_CFLAGS := $(patsubst -I%,,$(CFLAGS)) USER_CFLAGS := $(patsubst -I%,,$(CFLAGS))
USER_CFLAGS := $(patsubst -Derrno=kernel_errno,,$(USER_CFLAGS)) USER_CFLAGS := $(patsubst -Derrno=kernel_errno,,$(USER_CFLAGS))
...@@ -92,7 +122,8 @@ USER_CFLAGS := $(patsubst -D__KERNEL__,,$(USER_CFLAGS)) $(ARCH_INCLUDE) \ ...@@ -92,7 +122,8 @@ USER_CFLAGS := $(patsubst -D__KERNEL__,,$(USER_CFLAGS)) $(ARCH_INCLUDE) \
# To get a definition of F_SETSIG # To get a definition of F_SETSIG
USER_CFLAGS += -D_GNU_SOURCE USER_CFLAGS += -D_GNU_SOURCE
CLEAN_FILES += linux x.i gmon.out $(ARCH_DIR)/link.ld $(GEN_HEADERS) CLEAN_FILES += linux x.i gmon.out $(ARCH_DIR)/uml.lds.s \
$(ARCH_DIR)/dyn_link.ld.s $(GEN_HEADERS)
$(ARCH_DIR)/main.o: $(ARCH_DIR)/main.c $(ARCH_DIR)/main.o: $(ARCH_DIR)/main.c
$(CC) $(USER_CFLAGS) $(EXTRA_CFLAGS) -c -o $@ $< $(CC) $(USER_CFLAGS) $(EXTRA_CFLAGS) -c -o $@ $<
...@@ -102,8 +133,7 @@ archmrproper: ...@@ -102,8 +133,7 @@ archmrproper:
do \ do \
$(MAKE) -C $$d archmrproper; \ $(MAKE) -C $$d archmrproper; \
done done
rm -f $(SYMLINK_HEADERS) $(ARCH_SYMLINKS) include/asm \ rm -f $(CLEAN_FILES) $(SYMLINK_HEADERS) $(ARCH_SYMLINKS) include/asm \
$(ARCH_DIR)/link.ld \
$(addprefix $(ARCH_DIR)/kernel/,$(KERN_SYMLINKS)) $(addprefix $(ARCH_DIR)/kernel/,$(KERN_SYMLINKS))
archclean: sysclean archclean: sysclean
...@@ -146,7 +176,4 @@ $(ARCH_DIR)/util/mk_task : $(ARCH_DIR)/kernel/skas/include/skas_ptregs.h \ ...@@ -146,7 +176,4 @@ $(ARCH_DIR)/util/mk_task : $(ARCH_DIR)/kernel/skas/include/skas_ptregs.h \
$(ARCH_DIR)/util: FORCE $(ARCH_DIR)/util: FORCE
@$(call descend,$@,) @$(call descend,$@,)
$(ARCH_DIR)/kernel/skas/include/skas_ptregs.h :
$(MAKE) -C $(ARCH_DIR)/kernel/skas include/skas_ptregs.h
export SUBARCH USER_CFLAGS OS export SUBARCH USER_CFLAGS OS
arch/um/Makefile-skas 0 → 100644
View file @ dbb3cc44
#
# Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
# Licensed under the GPL
#
PROFILE += -pg
CFLAGS-$(CONFIG_GCOV) += -fprofile-arcs -ftest-coverage
CFLAGS-$(CONFIG_GPROF) += $(PROFILE)
LINK-$(CONFIG_GPROF) += $(PROFILE)
MODE_INCLUDE += -I$(TOPDIR)/$(ARCH_DIR)/kernel/skas/include
LINK_SKAS = -Wl,-rpath,/lib
LD_SCRIPT_SKAS = dyn.lds.s
GEN_HEADERS += $(ARCH_DIR)/kernel/skas/include/skas_ptregs.h
$(ARCH_DIR)/kernel/skas/include/skas_ptregs.h :
$(MAKE) -C $(ARCH_DIR)/kernel/skas include/skas_ptregs.h
arch/um/Makefile-tt 0 → 100644
View file @ dbb3cc44
#
# Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
# Licensed under the GPL
#
MODE_INCLUDE += -I$(TOPDIR)/$(ARCH_DIR)/kernel/tt/include
arch/um/drivers/line.c
View file @ dbb3cc44
...@@ -452,11 +452,19 @@ void line_register_devfs(struct lines *set, struct line_driver *line_driver, ...@@ -452,11 +452,19 @@ void line_register_devfs(struct lines *set, struct line_driver *line_driver,
void lines_init(struct line *lines, int nlines) void lines_init(struct line *lines, int nlines)
{ {
struct line *line;
int i; int i;
for(i = 0; i < nlines; i++){ for(i = 0; i < nlines; i++){
INIT_LIST_HEAD(&lines[i].chan_list); line = &lines[i];
sema_init(&lines[i].sem, 1); INIT_LIST_HEAD(&line->chan_list);
sema_init(&line->sem, 1);
if(line->init_str != NULL){
line->init_str = uml_strdup(line->init_str);
if(line->init_str == NULL)
printk("lines_init - uml_strdup returned "
"NULL\n");
}
} }
} }
......
arch/um/drivers/port_kern.c
View file @ dbb3cc44
...@@ -99,7 +99,8 @@ static int port_accept(struct port_list *port) ...@@ -99,7 +99,8 @@ static int port_accept(struct port_list *port)
} }
list_add(&conn->list, &port->pending); list_add(&conn->list, &port->pending);
return(1); ret = 1;
goto out;
out_free: out_free:
kfree(conn); kfree(conn);
...@@ -274,8 +275,6 @@ void port_kern_free(void *d) ...@@ -274,8 +275,6 @@ void port_kern_free(void *d)
{ {
struct port_dev *dev = d; struct port_dev *dev = d;
if(dev->helper_pid != -1) os_kill_process(dev->helper_pid, 0);
if(dev->telnetd_pid != -1) os_kill_process(dev->telnetd_pid, 0);
kfree(dev); kfree(dev);
} }
......
arch/um/dyn.lds.S 0 → 100644
View file @ dbb3cc44
OUTPUT_FORMAT(ELF_FORMAT)
OUTPUT_ARCH(ELF_ARCH)
ENTRY(_start)
jiffies = jiffies_64;
SEARCH_DIR("/usr/local/i686-pc-linux-gnu/lib"); SEARCH_DIR("/usr/local/lib"); SEARCH_DIR("/lib"); SEARCH_DIR("/usr/lib");
/* Do we need any of these for elf?
__DYNAMIC = 0; */
SECTIONS
{
. = START + SIZEOF_HEADERS;
.interp : { *(.interp) }
. = ALIGN(4096);
__binary_start = .;
. = ALIGN(4096); /* Init code and data */
_stext = .;
__init_begin = .;
.text.init : { *(.text.init) }
. = ALIGN(4096);
/* Read-only sections, merged into text segment: */
.hash : { *(.hash) }
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.gnu.version : { *(.gnu.version) }
.gnu.version_d : { *(.gnu.version_d) }
.gnu.version_r : { *(.gnu.version_r) }
.rel.init : { *(.rel.init) }
.rela.init : { *(.rela.init) }
.rel.text : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
.rela.text : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
.rel.fini : { *(.rel.fini) }
.rela.fini : { *(.rela.fini) }
.rel.rodata : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
.rela.rodata : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
.rel.data : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
.rela.data : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
.rel.tdata : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
.rela.tdata : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
.rel.tbss : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
.rela.tbss : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
.rel.ctors : { *(.rel.ctors) }
.rela.ctors : { *(.rela.ctors) }
.rel.dtors : { *(.rel.dtors) }
.rela.dtors : { *(.rela.dtors) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.bss : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
.rela.bss : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
.rel.plt : { *(.rel.plt) }
.rela.plt : { *(.rela.plt) }
.init : {
KEEP (*(.init))
} =0x90909090
.plt : { *(.plt) }
.text : {
*(.text .stub .text.* .gnu.linkonce.t.*)
/* .gnu.warning sections are handled specially by elf32.em. */
*(.gnu.warning)
} =0x90909090
.fini : {
KEEP (*(.fini))
} =0x90909090
.kstrtab : { *(.kstrtab) }
. = ALIGN(16); /* Exception table */
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
__start___ksymtab = .; /* Kernel symbol table */
__ksymtab : { *(__ksymtab) }
__stop___ksymtab = .;
PROVIDE (__etext = .);
PROVIDE (_etext = .);
PROVIDE (etext = .);
.rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
.rodata1 : { *(.rodata1) }
.eh_frame_hdr : { *(.eh_frame_hdr) }
. = ALIGN(4096);
PROVIDE (_sdata = .);
.unprotected : { *(.unprotected) }
. = ALIGN(4096);
PROVIDE (_unprotected_end = .);
. = ALIGN(4096);
__uml_setup_start = .;
.uml.setup.init : { *(.uml.setup.init) }
__uml_setup_end = .;
__uml_help_start = .;
.uml.help.init : { *(.uml.help.init) }
__uml_help_end = .;
__uml_postsetup_start = .;
.uml.postsetup.init : { *(.uml.postsetup.init) }
__uml_postsetup_end = .;
__setup_start = .;
.setup.init : { *(.init.setup) }
__setup_end = .;
__start___param = .;
__param : { *(__param) }
__stop___param = .;
__per_cpu_start = . ;
.data.percpu : { *(.data.percpu) }
__per_cpu_end = . ;
__initcall_start = .;
.initcall.init : {
*(.initcall1.init)
*(.initcall2.init)
*(.initcall3.init)
*(.initcall4.init)
*(.initcall5.init)
*(.initcall6.init)
*(.initcall7.init)
}
__initcall_end = .;
__uml_initcall_start = .;
.uml.initcall.init : { *(.uml.initcall.init) }
__uml_initcall_end = .;
__init_end = .;
__exitcall_begin = .;
.exitcall : { *(.exitcall.exit) }
__exitcall_end = .;
__uml_exitcall_begin = .;
.uml.exitcall : { *(.uml.exitcall.exit) }
__uml_exitcall_end = .;
. = ALIGN(4096);
__initramfs_start = .;
.init.ramfs : { *(.init.ramfs) }
__initramfs_end = .;
.data.init : { *(.data.init) }
/* Ensure the __preinit_array_start label is properly aligned. We
could instead move the label definition inside the section, but
the linker would then create the section even if it turns out to
be empty, which isn't pretty. */
. = ALIGN(32 / 8);
.preinit_array : { *(.preinit_array) }
.init_array : { *(.init_array) }
.fini_array : { *(.fini_array) }
.data : {
. = ALIGN(KERNEL_STACK_SIZE); /* init_task */
*(.data.init_task)
*(.data .data.* .gnu.linkonce.d.*)
SORT(CONSTRUCTORS)
}
.data1 : { *(.data1) }
.tdata : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
.tbss : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
.eh_frame : { KEEP (*(.eh_frame)) }
.gcc_except_table : { *(.gcc_except_table) }
.dynamic : { *(.dynamic) }
.ctors : {
/* gcc uses crtbegin.o to find the start of
the constructors, so we make sure it is
first. Because this is a wildcard, it
doesn't matter if the user does not
actually link against crtbegin.o; the
linker won't look for a file to match a
wildcard. The wildcard also means that it
doesn't matter which directory crtbegin.o
is in. */
KEEP (*crtbegin.o(.ctors))
/* We don't want to include the .ctor section from
from the crtend.o file until after the sorted ctors.
The .ctor section from the crtend file contains the
end of ctors marker and it must be last */
KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors))
KEEP (*(SORT(.ctors.*)))
KEEP (*(.ctors))
}
.dtors : {
KEEP (*crtbegin.o(.dtors))
KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors))
KEEP (*(SORT(.dtors.*)))
KEEP (*(.dtors))
}
.jcr : { KEEP (*(.jcr)) }
.got : { *(.got.plt) *(.got) }
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss : {
*(.dynbss)
*(.bss .bss.* .gnu.linkonce.b.*)
*(COMMON)
/* Align here to ensure that the .bss section occupies space up to
_end. Align after .bss to ensure correct alignment even if the
.bss section disappears because there are no input sections. */
. = ALIGN(32 / 8);
. = ALIGN(32 / 8);
}
_end = .;
PROVIDE (end = .);
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
/* DWARF debug sections.
Symbols in the DWARF debugging sections are relative to the beginning
of the section so we begin them at 0. */
/* DWARF 1 */
.debug 0 : { *(.debug) }
.line 0 : { *(.line) }
/* GNU DWARF 1 extensions */
.debug_srcinfo 0 : { *(.debug_srcinfo) }
.debug_sfnames 0 : { *(.debug_sfnames) }
/* DWARF 1.1 and DWARF 2 */
.debug_aranges 0 : { *(.debug_aranges) }
.debug_pubnames 0 : { *(.debug_pubnames) }
/* DWARF 2 */
.debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_line 0 : { *(.debug_line) }
.debug_frame 0 : { *(.debug_frame) }
.debug_str 0 : { *(.debug_str) }
.debug_loc 0 : { *(.debug_loc) }
.debug_macinfo 0 : { *(.debug_macinfo) }
/* SGI/MIPS DWARF 2 extensions */
.debug_weaknames 0 : { *(.debug_weaknames) }
.debug_funcnames 0 : { *(.debug_funcnames) }
.debug_typenames 0 : { *(.debug_typenames) }
.debug_varnames 0 : { *(.debug_varnames) }
}
arch/um/dyn_link.ld.in 0 → 100644
View file @ dbb3cc44
OUTPUT_FORMAT("ELF_FORMAT")
OUTPUT_ARCH(ELF_ARCH)
ENTRY(_start)
SEARCH_DIR("/usr/local/i686-pc-linux-gnu/lib"); SEARCH_DIR("/usr/local/lib"); SEARCH_DIR("/lib"); SEARCH_DIR("/usr/lib");
/* Do we need any of these for elf?
__DYNAMIC = 0; */
SECTIONS
{
. = START() + SIZEOF_HEADERS;
.interp : { *(.interp) }
. = ALIGN(4096);
__binary_start = .;
. = ALIGN(4096); /* Init code and data */
_stext = .;
__init_begin = .;
.text.init : { *(.text.init) }
. = ALIGN(4096);
/* Read-only sections, merged into text segment: */
.hash : { *(.hash) }
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.gnu.version : { *(.gnu.version) }
.gnu.version_d : { *(.gnu.version_d) }
.gnu.version_r : { *(.gnu.version_r) }
.rel.init : { *(.rel.init) }
.rela.init : { *(.rela.init) }
.rel.text : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
.rela.text : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
.rel.fini : { *(.rel.fini) }
.rela.fini : { *(.rela.fini) }
.rel.rodata : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
.rela.rodata : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
.rel.data : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
.rela.data : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
.rel.tdata : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
.rela.tdata : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
.rel.tbss : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
.rela.tbss : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
.rel.ctors : { *(.rel.ctors) }
.rela.ctors : { *(.rela.ctors) }
.rel.dtors : { *(.rel.dtors) }
.rela.dtors : { *(.rela.dtors) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.bss : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
.rela.bss : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
.rel.plt : { *(.rel.plt) }
.rela.plt : { *(.rela.plt) }
.init : {
KEEP (*(.init))
} =0x90909090
.plt : { *(.plt) }
.text : {
*(.text .stub .text.* .gnu.linkonce.t.*)
/* .gnu.warning sections are handled specially by elf32.em. */
*(.gnu.warning)
} =0x90909090
.fini : {
KEEP (*(.fini))
} =0x90909090
.kstrtab : { *(.kstrtab) }
. = ALIGN(16); /* Exception table */
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
__start___ksymtab = .; /* Kernel symbol table */
__ksymtab : { *(__ksymtab) }
__stop___ksymtab = .;
PROVIDE (__etext = .);
PROVIDE (_etext = .);
PROVIDE (etext = .);
.rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
.rodata1 : { *(.rodata1) }
.eh_frame_hdr : { *(.eh_frame_hdr) }
. = ALIGN(4096);
PROVIDE (_sdata = .);
.unprotected : { *(.unprotected) }
. = ALIGN(4096);
PROVIDE (_unprotected_end = .);
. = ALIGN(4096);
__uml_setup_start = .;
.uml.setup.init : { *(.uml.setup.init) }
__uml_setup_end = .;
__uml_help_start = .;
.uml.help.init : { *(.uml.help.init) }
__uml_help_end = .;
__uml_postsetup_start = .;
.uml.postsetup.init : { *(.uml.postsetup.init) }
__uml_postsetup_end = .;
__setup_start = .;
.setup.init : { *(.setup.init) }
__setup_end = .;
__initcall_start = .;
.initcall.init : { *(.initcall.init) }
__initcall_end = .;
__uml_initcall_start = .;
.uml.initcall.init : { *(.uml.initcall.init) }
__uml_initcall_end = .;
__init_end = .;
__exitcall_begin = .;
.exitcall : { *(.exitcall.exit) }
__exitcall_end = .;
__uml_exitcall_begin = .;
.uml.exitcall : { *(.uml.exitcall.exit) }
__uml_exitcall_end = .;
.data.init : { *(.data.init) }
/* Ensure the __preinit_array_start label is properly aligned. We
could instead move the label definition inside the section, but
the linker would then create the section even if it turns out to
be empty, which isn't pretty. */
. = ALIGN(32 / 8);
.preinit_array : { *(.preinit_array) }
.init_array : { *(.init_array) }
.fini_array : { *(.fini_array) }
.data : {
. = ALIGN(KERNEL_STACK_SIZE); /* init_task */
*(.data.init_task)
*(.data .data.* .gnu.linkonce.d.*)
SORT(CONSTRUCTORS)
}
.data1 : { *(.data1) }
.tdata : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
.tbss : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
.eh_frame : { KEEP (*(.eh_frame)) }
.gcc_except_table : { *(.gcc_except_table) }
.dynamic : { *(.dynamic) }
.ctors : {
/* gcc uses crtbegin.o to find the start of
the constructors, so we make sure it is
first. Because this is a wildcard, it
doesn't matter if the user does not
actually link against crtbegin.o; the
linker won't look for a file to match a
wildcard. The wildcard also means that it
doesn't matter which directory crtbegin.o
is in. */
KEEP (*crtbegin.o(.ctors))
/* We don't want to include the .ctor section from
from the crtend.o file until after the sorted ctors.
The .ctor section from the crtend file contains the
end of ctors marker and it must be last */
KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors))
KEEP (*(SORT(.ctors.*)))
KEEP (*(.ctors))
}
.dtors : {
KEEP (*crtbegin.o(.dtors))
KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors))
KEEP (*(SORT(.dtors.*)))
KEEP (*(.dtors))
}
.jcr : { KEEP (*(.jcr)) }
.got : { *(.got.plt) *(.got) }
_edata = .;
PROVIDE (edata = .);
__bss_start = .;
.bss : {
*(.dynbss)
*(.bss .bss.* .gnu.linkonce.b.*)
*(COMMON)
/* Align here to ensure that the .bss section occupies space up to
_end. Align after .bss to ensure correct alignment even if the
.bss section disappears because there are no input sections. */
. = ALIGN(32 / 8);
. = ALIGN(32 / 8);
}
_end = .;
PROVIDE (end = .);
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
/* DWARF debug sections.
Symbols in the DWARF debugging sections are relative to the beginning
of the section so we begin them at 0. */
/* DWARF 1 */
.debug 0 : { *(.debug) }
.line 0 : { *(.line) }
/* GNU DWARF 1 extensions */
.debug_srcinfo 0 : { *(.debug_srcinfo) }
.debug_sfnames 0 : { *(.debug_sfnames) }
/* DWARF 1.1 and DWARF 2 */
.debug_aranges 0 : { *(.debug_aranges) }
.debug_pubnames 0 : { *(.debug_pubnames) }
/* DWARF 2 */
.debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_line 0 : { *(.debug_line) }
.debug_frame 0 : { *(.debug_frame) }
.debug_str 0 : { *(.debug_str) }
.debug_loc 0 : { *(.debug_loc) }
.debug_macinfo 0 : { *(.debug_macinfo) }
/* SGI/MIPS DWARF 2 extensions */
.debug_weaknames 0 : { *(.debug_weaknames) }
.debug_funcnames 0 : { *(.debug_funcnames) }
.debug_typenames 0 : { *(.debug_typenames) }
.debug_varnames 0 : { *(.debug_varnames) }
}
arch/um/include/sysdep-i386/ptrace.h
View file @ dbb3cc44
...@@ -7,8 +7,15 @@ ...@@ -7,8 +7,15 @@
#define __SYSDEP_I386_PTRACE_H #define __SYSDEP_I386_PTRACE_H
#include "uml-config.h" #include "uml-config.h"
#ifdef CONFIG_MODE_TT
#include "ptrace-tt.h" #include "ptrace-tt.h"
#endif
#ifdef CONFIG_MODE_SKAS
#include "ptrace-skas.h" #include "ptrace-skas.h"
#endif
#include "choose-mode.h" #include "choose-mode.h"
struct uml_pt_regs { struct uml_pt_regs {
......
arch/um/include/user_util.h
View file @ dbb3cc44
...@@ -61,7 +61,6 @@ extern int start_fork_tramp(void *arg, unsigned long temp_stack, ...@@ -61,7 +61,6 @@ extern int start_fork_tramp(void *arg, unsigned long temp_stack,
int clone_flags, int (*tramp)(void *)); int clone_flags, int (*tramp)(void *));
extern int clone_and_wait(int (*fn)(void *), void *arg, void *sp, int flags); extern int clone_and_wait(int (*fn)(void *), void *arg, void *sp, int flags);
extern int linux_main(int argc, char **argv); extern int linux_main(int argc, char **argv);
extern void remap_data(void *segment_start, void *segment_end, int w);
extern void set_cmdline(char *cmd); extern void set_cmdline(char *cmd);
extern void input_cb(void (*proc)(void *), void *arg, int arg_len); extern void input_cb(void (*proc)(void *), void *arg, int arg_len);
extern int get_pty(void); extern int get_pty(void);
......
arch/um/kernel/Makefile
View file @ dbb3cc44
...@@ -3,8 +3,6 @@ ...@@ -3,8 +3,6 @@
# Licensed under the GPL # Licensed under the GPL
# #
EXTRA_TARGETS := unmap_fin.o
obj-y = checksum.o config.o exec_kern.o exitcode.o frame_kern.o frame.o \ obj-y = checksum.o config.o exec_kern.o exitcode.o frame_kern.o frame.o \
helper.o init_task.o irq.o irq_user.o ksyms.o mem.o mem_user.o \ helper.o init_task.o irq.o irq_user.o ksyms.o mem.o mem_user.o \
process.o process_kern.o ptrace.o reboot.o resource.o sigio_user.o \ process.o process_kern.o ptrace.o reboot.o resource.o sigio_user.o \
...@@ -30,9 +28,6 @@ USER_OBJS := $(filter %_user.o,$(obj-y)) $(user-objs-y) config.o helper.o \ ...@@ -30,9 +28,6 @@ USER_OBJS := $(filter %_user.o,$(obj-y)) $(user-objs-y) config.o helper.o \
process.o tempfile.o time.o tty_log.o umid.o user_util.o user_syms.o process.o tempfile.o time.o tty_log.o umid.o user_util.o user_syms.o
USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file)) USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file))
UNMAP_CFLAGS := $(patsubst -pg -DPROFILING,,$(USER_CFLAGS))
UNMAP_CFLAGS := $(patsubst -fprofile-arcs -ftest-coverage,,$(UNMAP_CFLAGS))
DMODULES-$(CONFIG_MODULES) = -D__CONFIG_MODULES__ DMODULES-$(CONFIG_MODULES) = -D__CONFIG_MODULES__
DMODVERSIONS-$(CONFIG_MODVERSIONS) = -D__CONFIG_MODVERSIONS__ DMODVERSIONS-$(CONFIG_MODVERSIONS) = -D__CONFIG_MODVERSIONS__
...@@ -49,12 +44,6 @@ CFLAGS_frame.o := $(patsubst -fomit-frame-pointer,,$(USER_CFLAGS)) ...@@ -49,12 +44,6 @@ CFLAGS_frame.o := $(patsubst -fomit-frame-pointer,,$(USER_CFLAGS))
$(USER_OBJS) : %.o: %.c $(USER_OBJS) : %.o: %.c
$(CC) $(CFLAGS_$@) $(USER_CFLAGS) -c -o $@ $< $(CC) $(CFLAGS_$@) $(USER_CFLAGS) -c -o $@ $<
$(obj)/unmap.o: $(src)/unmap.c
$(CC) $(UNMAP_CFLAGS) -c -o $@ $<
$(obj)/unmap_fin.o : $(src)/unmap.o
ld -r -o $@ $< -lc -L/usr/lib
# This has to be separate because it needs be compiled with frame pointers # This has to be separate because it needs be compiled with frame pointers
# regardless of how the rest of the kernel is built. # regardless of how the rest of the kernel is built.
......
arch/um/kernel/ptrace.c
View file @ dbb3cc44
...@@ -9,7 +9,9 @@ ...@@ -9,7 +9,9 @@
#include "linux/smp_lock.h" #include "linux/smp_lock.h"
#include "linux/security.h" #include "linux/security.h"
#include "linux/ptrace.h" #include "linux/ptrace.h"
#ifdef CONFIG_PROC_MM
#include "linux/proc_mm.h" #include "linux/proc_mm.h"
#endif
#include "asm/ptrace.h" #include "asm/ptrace.h"
#include "asm/uaccess.h" #include "asm/uaccess.h"
#include "kern_util.h" #include "kern_util.h"
......
arch/um/kernel/skas/include/mode_kern.h
View file @ dbb3cc44
...@@ -21,6 +21,8 @@ extern void release_thread_skas(struct task_struct *task); ...@@ -21,6 +21,8 @@ extern void release_thread_skas(struct task_struct *task);
extern void exit_thread_skas(void); extern void exit_thread_skas(void);
extern void initial_thread_cb_skas(void (*proc)(void *), void *arg); extern void initial_thread_cb_skas(void (*proc)(void *), void *arg);
extern void init_idle_skas(void); extern void init_idle_skas(void);
extern void flush_tlb_kernel_range_skas(unsigned long start,
unsigned long end);
extern void flush_tlb_kernel_vm_skas(void); extern void flush_tlb_kernel_vm_skas(void);
extern void __flush_tlb_one_skas(unsigned long addr); extern void __flush_tlb_one_skas(unsigned long addr);
extern void flush_tlb_range_skas(struct vm_area_struct *vma, extern void flush_tlb_range_skas(struct vm_area_struct *vma,
......
arch/um/kernel/skas/tlb.c
View file @ dbb3cc44
...@@ -67,7 +67,7 @@ static void fix_range(struct mm_struct *mm, unsigned long start_addr, ...@@ -67,7 +67,7 @@ static void fix_range(struct mm_struct *mm, unsigned long start_addr,
} }
} }
static void flush_kernel_vm_range(unsigned long start, unsigned long end) void flush_tlb_kernel_range_skas(unsigned long start, unsigned long end)
{ {
struct mm_struct *mm; struct mm_struct *mm;
pgd_t *pgd; pgd_t *pgd;
...@@ -116,19 +116,19 @@ static void flush_kernel_vm_range(unsigned long start, unsigned long end) ...@@ -116,19 +116,19 @@ static void flush_kernel_vm_range(unsigned long start, unsigned long end)
void flush_tlb_kernel_vm_skas(void) void flush_tlb_kernel_vm_skas(void)
{ {
flush_kernel_vm_range(start_vm, end_vm); flush_tlb_kernel_range_skas(start_vm, end_vm);
} }
void __flush_tlb_one_skas(unsigned long addr) void __flush_tlb_one_skas(unsigned long addr)
{ {
flush_kernel_vm_range(addr, addr + PAGE_SIZE); flush_tlb_kernel_range_skas(addr, addr + PAGE_SIZE);
} }
void flush_tlb_range_skas(struct vm_area_struct *vma, unsigned long start, void flush_tlb_range_skas(struct vm_area_struct *vma, unsigned long start,
unsigned long end) unsigned long end)
{ {
if(vma->vm_mm == NULL) if(vma->vm_mm == NULL)
flush_kernel_vm_range(start, end); flush_tlb_kernel_range_skas(start, end);
else fix_range(vma->vm_mm, start, end, 0); else fix_range(vma->vm_mm, start, end, 0);
} }
......
arch/um/kernel/tlb.c
View file @ dbb3cc44
...@@ -21,6 +21,12 @@ void flush_tlb_all(void) ...@@ -21,6 +21,12 @@ void flush_tlb_all(void)
flush_tlb_mm(current->mm); flush_tlb_mm(current->mm);
} }
void flush_tlb_kernel_range(unsigned long start, unsigned long end)
{
CHOOSE_MODE_PROC(flush_tlb_kernel_range_tt,
flush_tlb_kernel_range_skas, start, end);
}
void flush_tlb_kernel_vm(void) void flush_tlb_kernel_vm(void)
{ {
CHOOSE_MODE(flush_tlb_kernel_vm_tt(), flush_tlb_kernel_vm_skas()); CHOOSE_MODE(flush_tlb_kernel_vm_tt(), flush_tlb_kernel_vm_skas());
......
arch/um/kernel/tt/Makefile
View file @ dbb3cc44
...@@ -3,18 +3,31 @@ ...@@ -3,18 +3,31 @@
# Licensed under the GPL # Licensed under the GPL
# #
obj-y = exec_kern.o exec_user.o gdb.o gdb_kern.o ksyms.o mem.o process_kern.o \ EXTRA_TARGETS := unmap_fin.o
obj-y = exec_kern.o exec_user.o gdb.o ksyms.o mem.o mem_user.o process_kern.o \
syscall_kern.o syscall_user.o time.o tlb.o tracer.o trap_user.o \ syscall_kern.o syscall_user.o time.o tlb.o tracer.o trap_user.o \
uaccess_user.o sys-$(SUBARCH)/ uaccess_user.o sys-$(SUBARCH)/
obj-$(CONFIG_PT_PROXY) += ptproxy/ obj-$(CONFIG_PT_PROXY) += gdb_kern.o ptproxy/
export-objs = ksyms.o export-objs = ksyms.o
USER_OBJS := $(filter %_user.o,$(obj-y)) gdb.o time.o tracer.o USER_OBJS := $(filter %_user.o,$(obj-y)) gdb.o time.o tracer.o
USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file)) USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file))
UNMAP_CFLAGS := $(patsubst -pg -DPROFILING,,$(USER_CFLAGS))
UNMAP_CFLAGS := $(patsubst -fprofile-arcs -ftest-coverage,,$(UNMAP_CFLAGS))
$(USER_OBJS) : %.o: %.c $(USER_OBJS) : %.o: %.c
$(CC) $(CFLAGS_$(notdir $@)) $(USER_CFLAGS) -c -o $@ $< $(CC) $(CFLAGS_$(notdir $@)) $(USER_CFLAGS) -c -o $@ $<
$(O_TARGET) : $(obj)/unmap_fin.o
$(obj)/unmap.o: $(src)/unmap.c
$(CC) $(UNMAP_CFLAGS) -c -o $@ $<
$(obj)/unmap_fin.o : $(src)/unmap.o
ld -r -o $@ $< -lc -L/usr/lib
clean : clean :
arch/um/kernel/tt/include/mode_kern.h
View file @ dbb3cc44
...@@ -22,6 +22,7 @@ extern void release_thread_tt(struct task_struct *task); ...@@ -22,6 +22,7 @@ extern void release_thread_tt(struct task_struct *task);
extern void exit_thread_tt(void); extern void exit_thread_tt(void);
extern void initial_thread_cb_tt(void (*proc)(void *), void *arg); extern void initial_thread_cb_tt(void (*proc)(void *), void *arg);
extern void init_idle_tt(void); extern void init_idle_tt(void);
extern void flush_tlb_kernel_range_tt(unsigned long start, unsigned long end);
extern void flush_tlb_kernel_vm_tt(void); extern void flush_tlb_kernel_vm_tt(void);
extern void __flush_tlb_one_tt(unsigned long addr); extern void __flush_tlb_one_tt(unsigned long addr);
extern void flush_tlb_range_tt(struct vm_area_struct *vma, extern void flush_tlb_range_tt(struct vm_area_struct *vma,
......
arch/um/kernel/tt/mem_user.c 0 → 100644
View file @ dbb3cc44
/*
* Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
#include <stdlib.h>
#include <stdio.h>
#include <unistd.h>
#include <string.h>
#include <errno.h>
#include <sys/mman.h>
#include "tt.h"
#include "mem_user.h"
#include "user_util.h"
void remap_data(void *segment_start, void *segment_end, int w)
{
void *addr;
unsigned long size;
int data, prot;
if(w) prot = PROT_WRITE;
else prot = 0;
prot |= PROT_READ | PROT_EXEC;
size = (unsigned long) segment_end -
(unsigned long) segment_start;
data = create_mem_file(size);
if((addr = mmap(NULL, size, PROT_WRITE | PROT_READ,
MAP_SHARED, data, 0)) < 0){
perror("mapping new data segment");
exit(1);
}
memcpy(addr, segment_start, size);
if(switcheroo(data, prot, addr, segment_start,
size) < 0){
printf("switcheroo failed\n");
exit(1);
}
}
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
* Emacs will notice this stuff at the end of the file and automatically
* adjust the settings for this buffer only. This must remain at the end
* of the file.
* ---------------------------------------------------------------------------
* Local variables:
* c-file-style: "linux"
* End:
*/
arch/um/kernel/tt/tlb.c
View file @ dbb3cc44
...@@ -132,7 +132,7 @@ static void flush_kernel_vm_range(unsigned long start, unsigned long end, ...@@ -132,7 +132,7 @@ static void flush_kernel_vm_range(unsigned long start, unsigned long end,
if(updated && update_seq) atomic_inc(&vmchange_seq); if(updated && update_seq) atomic_inc(&vmchange_seq);
} }
void flush_tlb_kernel_range(unsigned long start, unsigned long end) void flush_tlb_kernel_range_tt(unsigned long start, unsigned long end)
{ {
flush_kernel_vm_range(start, end, 1); flush_kernel_vm_range(start, end, 1);
} }
......
arch/um/kernel/user_util.c
View file @ dbb3cc44
...@@ -46,31 +46,6 @@ void add_arg(char *cmd_line, char *arg) ...@@ -46,31 +46,6 @@ void add_arg(char *cmd_line, char *arg)
strcat(cmd_line, arg); strcat(cmd_line, arg);
} }
void remap_data(void *segment_start, void *segment_end, int w)
{
void *addr;
unsigned long size;
int data, prot;
if(w) prot = PROT_WRITE;
else prot = 0;
prot |= PROT_READ | PROT_EXEC;
size = (unsigned long) segment_end -
(unsigned long) segment_start;
data = create_mem_file(size);
if((addr = mmap(NULL, size, PROT_WRITE | PROT_READ,
MAP_SHARED, data, 0)) < 0){
perror("mapping new data segment");
exit(1);
}
memcpy(addr, segment_start, size);
if(switcheroo(data, prot, addr, segment_start,
size) < 0){
printf("switcheroo failed\n");
exit(1);
}
}
void stop(void) void stop(void)
{ {
while(1) sleep(1000000); while(1) sleep(1000000);
......
arch/um/sys-i386/util/mk_thread_kern.c
View file @ dbb3cc44
#include "linux/config.h"
#include "linux/stddef.h" #include "linux/stddef.h"
#include "linux/sched.h" #include "linux/sched.h"
...@@ -12,7 +13,9 @@ int main(int argc, char **argv) ...@@ -12,7 +13,9 @@ int main(int argc, char **argv)
{ {
print_head(); print_head();
print_constant_ptr("TASK_DEBUGREGS", THREAD_OFFSET(arch.debugregs)); print_constant_ptr("TASK_DEBUGREGS", THREAD_OFFSET(arch.debugregs));
#ifdef CONFIG_MODE_TT
print_constant("TASK_EXTERN_PID", "int", THREAD_OFFSET(mode.tt.extern_pid)); print_constant("TASK_EXTERN_PID", "int", THREAD_OFFSET(mode.tt.extern_pid));
#endif
print_tail(); print_tail();
return(0); return(0);
} }
......
arch/um/uml.lds.S
View file @ dbb3cc44
...@@ -9,15 +9,17 @@ SECTIONS ...@@ -9,15 +9,17 @@ SECTIONS
. = ALIGN(4096); . = ALIGN(4096);
__binary_start = .; __binary_start = .;
#ifdef MODE_TT
.thread_private : { .thread_private : {
__start_thread_private = .; __start_thread_private = .;
errno = .; errno = .;
. += 4; . += 4;
arch/um/kernel/unmap_fin.o (.data) arch/um/kernel/tt/unmap_fin.o (.data)
__end_thread_private = .; __end_thread_private = .;
} }
. = ALIGN(4096); . = ALIGN(4096);
.remap : { arch/um/kernel/unmap_fin.o (.text) } .remap : { arch/um/kernel/tt/unmap_fin.o (.text) }
#endif
. = ALIGN(4096); /* Init code and data */ . = ALIGN(4096); /* Init code and data */
_stext = .; _stext = .;
...@@ -110,7 +112,7 @@ SECTIONS ...@@ -110,7 +112,7 @@ SECTIONS
.data.init : { *(.data.init) } .data.init : { *(.data.init) }
.data : .data :
{ {
. = ALIGN(16384); /* init_task */ . = ALIGN(KERNEL_STACK_SIZE); /* init_task */
*(.data.init_task) *(.data.init_task)
*(.data) *(.data)
*(.gnu.linkonce.d*) *(.gnu.linkonce.d*)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7