Skip to content

L
linux
Commit dc4bea0b authored by Andrew Peng's avatar Andrew Peng Committed by Joel Stanley
Browse files
Options

ARM: dts: aspeed: Add Lenovo Hr855xg2 BMC 

Initial introduction of Lenovo Hr855xg2 family equipped with
Aspeed 2500 BMC SoC. Hr855xg2 is a x86 server development kit
with a ASPEED ast2500 BMC manufactured by Lenovo.

This adds the Hr855xg2 platform device tree file used by the Hr855xg2
BMC machines.
Signed-off-by: default avatarAndrew Peng <pengms1@lenovo.com>
Signed-off-by: default avatarYonghui Liu <liuyh21@lenovo.com>
Signed-off-by: default avatarLisa Liu <liuyj19@lenovo.com>
Signed-off-by: default avatarHarry Sung <hsung1@lenovo.com>
Signed-off-by: default avatarDerek Lin <dlin23@lenovo.com>
Reviewed-by: default avatarAndrew Jeffery <andrew@aj.id.au>
Signed-off-by: default avatarJoel Stanley <joel@jms.id.au>
parent da335d2b
Hide whitespace changes
Inline Side-by-side
Showing with 664 additions and 0 deletions
arch/arm/boot/dts/Makefile
View file @ dc4bea0b
......@@ -1277,6 +1277,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-intel-s2600wf.dtb \
aspeed-bmc-inspur-fp5280g2.dtb \
aspeed-bmc-lenovo-hr630.dtb \
aspeed-bmc-lenovo-hr855xg2.dtb \
aspeed-bmc-microsoft-olympus.dtb \
aspeed-bmc-opp-lanyang.dtb \
aspeed-bmc-opp-palmetto.dtb \
......
arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts 0 → 100644
View file @ dc4bea0b
// SPDX-License-Identifier: GPL-2.0+
/*
* Device Tree file for Lenovo Hr855xg2 platform
*
* Copyright (C) 2019-present Lenovo
*/
/dts-v1/;
#include "aspeed-g5.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
/ {
model = "HR855XG2 BMC";
compatible = "lenovo,hr855xg2-bmc", "aspeed,ast2500";
aliases {
i2c14 = &i2c_riser1;
i2c15 = &i2c_riser2;
i2c16 = &i2c_riser3;
i2c17 = &i2c_M2;
i2c18 = &channel_0;
i2c19 = &channel_1;
i2c20 = &channel_2;
i2c21 = &channel_3;
};
chosen {
stdout-path = &uart5;
bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
};
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>;
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
flash_memory: region@98000000 {
no-map;
reg = <0x98000000 0x00100000>; /* 1M */
};
gfx_memory: framebuffer {
size = <0x01000000>;
alignment = <0x01000000>;
compatible = "shared-dma-pool";
reusable;
};
};
leds {
compatible = "gpio-leds";
heartbeat {
gpios = <&gpio ASPEED_GPIO(C, 7) GPIO_ACTIVE_LOW>;
};
fault {
gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
};
};
iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
<&adc 8>, <&adc 9>, <&adc 10>,<&adc 11>,
<&adc 12>,<&adc 13>,<&adc 14>;
};
iio-hwmon-battery {
compatible = "iio-hwmon";
io-channels = <&adc 15>;
};
};
&fmc {
status = "okay";
flash@0 {
status = "okay";
m25p,fast-read;
label = "bmc";
spi-max-frequency = <50000000>;
#include "openbmc-flash-layout.dtsi"
};
};
&lpc_ctrl {
status = "okay";
memory-region = <&flash_memory>;
flash = <&spi1>;
};
&lpc_snoop {
status = "okay";
snoop-ports = <0x80>;
};
&uart1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd1_default
&pinctrl_rxd1_default>;
};
&uart2 {
/* Rear RS-232 connector */
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd2_default
&pinctrl_rxd2_default
&pinctrl_nrts2_default
&pinctrl_ndtr2_default
&pinctrl_ndsr2_default
&pinctrl_ncts2_default
&pinctrl_ndcd2_default
&pinctrl_nri2_default>;
};
&uart3 {
status = "okay";
};
&uart5 {
status = "okay";
};
&ibt {
status = "okay";
};
&mac0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii1_default>;
use-ncsi;
};
&mac1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
};
&adc{
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adc0_default
&pinctrl_adc1_default
&pinctrl_adc2_default
&pinctrl_adc3_default
&pinctrl_adc4_default
&pinctrl_adc5_default
&pinctrl_adc6_default
&pinctrl_adc7_default
&pinctrl_adc8_default
&pinctrl_adc9_default
&pinctrl_adc10_default
&pinctrl_adc11_default
&pinctrl_adc12_default
&pinctrl_adc13_default
&pinctrl_adc14_default
&pinctrl_adc15_default>;
};
&i2c0 {
status = "okay";
i2c-switch@70 {
compatible = "nxp,pca9545";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
i2c_riser1: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
i2c_riser2: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
i2c_riser3: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
i2c_M2: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
};
};
&i2c1 {
status = "okay";
bus-frequency = <90000>;
HotSwap@10 {
compatible = "adm1272";
reg = <0x10>;
};
VR@45 {
compatible = "pmbus";
reg = <0x45>;
};
};
&i2c2 {
status = "okay";
};
&i2c3 {
status = "okay";
i2c-switch@70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
channel_0: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
channel_1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
channel_2: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
channel_3: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
};
};
&i2c4 {
status = "okay";
};
&i2c5 {
status = "okay";
};
&i2c6 {
status = "okay";
/* temp1 */
tmp75@49 {
compatible = "national,lm75";
reg = <0x49>;
};
/* temp2 */
tmp75@4d {
compatible = "national,lm75";
reg = <0x4d>;
};
eeprom@54 {
compatible = "atmel,24c256";
reg = <0x54>;
pagesize = <16>;
};
};
&i2c7 {
status = "okay";
};
&i2c8 {
status = "okay";
};
&i2c9 {
status = "okay";
};
&i2c10 {
status = "okay";
};
&i2c11 {
status = "okay";
};
&i2c13 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&uhci {
status = "okay";
};
&gfx {
status = "okay";
memory-region = <&gfx_memory>;
};
&pwm_tacho {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0_default
&pinctrl_pwm1_default
&pinctrl_pwm2_default
&pinctrl_pwm3_default
&pinctrl_pwm4_default
&pinctrl_pwm5_default
&pinctrl_pwm6_default
&pinctrl_pwm7_default>;
fan@0 {
reg = <0x00>;
aspeed,fan-tach-ch = /bits/ 8 <0x00>;
};
fan@1 {
reg = <0x00>;
aspeed,fan-tach-ch = /bits/ 8 <0x01>;
};
fan@2 {
reg = <0x01>;
aspeed,fan-tach-ch = /bits/ 8 <0x02>;
};
fan@3 {
reg = <0x01>;
aspeed,fan-tach-ch = /bits/ 8 <0x03>;
};
fan@4 {
reg = <0x02>;
aspeed,fan-tach-ch = /bits/ 8 <0x04>;
};
fan@5 {
reg = <0x02>;
aspeed,fan-tach-ch = /bits/ 8 <0x05>;
};
fan@6 {
reg = <0x03>;
aspeed,fan-tach-ch = /bits/ 8 <0x06>;
};
fan@7 {
reg = <0x03>;
aspeed,fan-tach-ch = /bits/ 8 <0x07>;
};
fan@8 {
reg = <0x04>;
aspeed,fan-tach-ch = /bits/ 8 <0x08>;
};
fan@9 {
reg = <0x04>;
aspeed,fan-tach-ch = /bits/ 8 <0x09>;
};
fan@10 {
reg = <0x05>;
aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
};
fan@11 {
reg = <0x05>;
aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
};
fan@12 {
reg = <0x06>;
aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
};
fan@13 {
reg = <0x06>;
aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
};
fan@14 {
reg = <0x07>;
aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
};
fan@15 {
reg = <0x07>;
aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
};
fan@16 {
reg = <0x07>;
aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
};
};
&gpio {
pin_gpio_a1 {
gpio-hog;
gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
output-high;
line-name = "BMC_EMMC_RST_N";
};
pin_gpio_a3 {
gpio-hog;
gpios = <ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
output-high;
line-name = "PCH_PWROK_BMC_FPGA";
};
pin_gpio_b5 {
gpio-hog;
gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "IRQ_BMC_PCH_SMI_LPC_N";
};
pin_gpio_b7 {
gpio-hog;
gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
output-low;
line-name = "CPU_SM_WP";
};
pin_gpio_e0 {
gpio-hog;
gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
input;
line-name = "PDB_PSU_SEL";
};
pin_gpio_e2 {
gpio-hog;
gpios = <ASPEED_GPIO(E, 2) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "LOCATOR_LED_N";
};
pin_gpio_e5 {
gpio-hog;
gpios = <ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "FM_BMC_DBP_PRESENT_R1_N";
};
pin_gpio_e6 {
gpio-hog;
gpios = <ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "BMC_ME_SECURITY_OVERRIDE_N";
};
pin_gpio_f0 {
gpio-hog;
gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "IRQ_BMC_PCH_NMI_R";
};
pin_gpio_f1 {
gpio-hog;
gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
input;
line-name = "CPU2_PROCDIS_BMC_N";
};
pin_gpio_f2 {
gpio-hog;
gpios = <ASPEED_GPIO(F, 2) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "RM_THROTTLE_EN_N";
};
pin_gpio_f3 {
gpio-hog;
gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "FM_PMBUS_ALERT_B_EN";
};
pin_gpio_f4 {
gpio-hog;
gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "BMC_FORCE_NM_THROTTLE_N";
};
pin_gpio_f6 {
gpio-hog;
gpios = <ASPEED_GPIO(F, 6) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "FM_BMC_CPU_PWR_DEBUG_N";
};
pin_gpio_g7 {
gpio-hog;
gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "BMC_PCIE_I2C_MUX_RST_N";
};
pin_gpio_h6 {
gpio-hog;
gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "FM_BMC_DBP_PRESENT_R2_N";
};
pin_gpio_i3 {
gpio-hog;
gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "SPI_BMC_BIOS_WP_N";
};
pin_gpio_j1 {
gpio-hog;
gpios = <ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "BMC_USB_SEL";
};
pin_gpio_j2 {
gpio-hog;
gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "PDB_SMB_RST_N";
};
pin_gpio_j3 {
gpio-hog;
gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "SPI_BMC_BIOS_HOLD_N";
};
pin_gpio_l0 {
gpio-hog;
gpios = <ASPEED_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "PDB_FAN_TACH_SEL";
};
pin_gpio_l1 {
gpio-hog;
gpios = <ASPEED_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "SYS_RESET_BMC_FPGA_N";
};
pin_gpio_l4 {
gpio-hog;
gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "FM_EFUSE_FAN_G1_EN";
};
pin_gpio_l5 {
gpio-hog;
gpios = <ASPEED_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "FM_EFUSE_FAN_G2_EN";
};
pin_gpio_r6 {
gpio-hog;
gpios = <ASPEED_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
input;
line-name = "CPU3_PROCDIS_BMC_N";
};
pin_gpio_r7 {
gpio-hog;
gpios = <ASPEED_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
input;
line-name = "CPU4_PROCDIS_BMC_N";
};
pin_gpio_s1 {
gpio-hog;
gpios = <ASPEED_GPIO(S, 1) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "DBP_SYSPWROK_BMC";
};
pin_gpio_s2 {
gpio-hog;
gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "PCH_RST_RSMRST_N";
};
pin_gpio_s6 {
gpio-hog;
gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "BMC_HW_STRAP_5";
};
pin_gpio_z3 {
gpio-hog;
gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "FM_BMC_PCH_SCI_LPC_N";
};
pin_gpio_aa0 {
gpio-hog;
gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "FW_PSU_ALERT_EN_N";
};
pin_gpio_aa4 {
gpio-hog;
gpios = <ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "DBP_CPU_PREQ_N";
};
pin_gpio_ab3 {
gpio-hog;
gpios = <ASPEED_GPIO(AB, 3) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "BMC_WDTRST";
};
pin_gpio_ac6 {
gpio-hog;
gpios = <ASPEED_GPIO(AC, 6) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "ESPI_BMC_ALERT_N";
};
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7