Merge branch '3.8/vram-conversion' of git://gitorious.org/linux-omap-dss2/linux

Conflicts:
	drivers/video/omap2/dss/Kconfig
	drivers/video/omap2/omapfb/omapfb-ioctl.c
	drivers/video/omap2/omapfb/omapfb-main.c

Merge changes to make omapfb use common dma_alloc, and remove omap's
custom vram allocator.

Documentation/arm/OMAP/DSS

@@ -285,7 +285,10 @@ FB0 +-- GFX  ---- LCD ---- LCD
 Misc notes
 ----------
 
-OMAP FB allocates the framebuffer memory using the OMAP VRAM allocator.
+OMAP FB allocates the framebuffer memory using the standard dma allocator. You
+can enable Contiguous Memory Allocator (CONFIG_CMA) to improve the dma
+allocator, and if CMA is enabled, you use "cma=" kernel parameter to increase
+the global memory area for CMA.
 
 Using DSI DPLL to generate pixel clock it is possible produce the pixel clock
 of 86.5MHz (max possible), and with that you get 1280x1024@57 output from DVI.
@@ -301,11 +304,6 @@ framebuffer parameters.
 Kernel boot arguments
 ---------------------
 
-vram=<size>[,<physaddr>]
-	- Amount of total VRAM to preallocate and optionally a physical start
-	  memory address. For example, "10M". omapfb allocates memory for
-	  framebuffers from VRAM.
-
 omapfb.mode=<display>:<mode>[,...]
 	- Default video mode for specified displays. For example,
 	  "dvi:800x400MR-24@60".  See drivers/video/modedb.c.

arch/arm/mach-omap2/board-rx51-video.c

@@ -16,7 +16,6 @@
 #include <linux/mm.h>
 #include <asm/mach-types.h>
 #include <video/omapdss.h>
-#include <plat/vram.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include "board-rx51.h"
@@ -87,17 +86,4 @@ static int __init rx51_video_init(void)
 }
 
 subsys_initcall(rx51_video_init);
-
-void __init rx51_video_mem_init(void)
-{
-	/*
-	 * GFX 864x480x32bpp
-	 * VID1/2 1280x720x32bpp double buffered
-	 */
-	omap_vram_set_sdram_vram(PAGE_ALIGN(864 * 480 * 4) +
-			2 * PAGE_ALIGN(1280 * 720 * 4 * 2), 0);
-}
-
-#else
-void __init rx51_video_mem_init(void) { }
 #endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */

arch/arm/mach-omap2/board-rx51.c

@@ -34,8 +34,6 @@
 
 #define RX51_GPIO_SLEEP_IND 162
 
-extern void rx51_video_mem_init(void);
-
 static struct gpio_led gpio_leds[] = {
 	{
 		.name	= "sleep_ind",
@@ -112,7 +110,6 @@ static void __init rx51_init(void)
 
 static void __init rx51_reserve(void)
 {
-	rx51_video_mem_init();
 	omap_reserve();
 }
 

arch/arm/plat-omap/common.c

@@ -17,7 +17,6 @@
 #include <linux/dma-mapping.h>
 
 #include <plat/common.h>
-#include <plat/vram.h>
 #include <linux/platform_data/dsp-omap.h>
 #include <plat/dma.h>
 
@@ -25,7 +24,6 @@
 
 void __init omap_reserve(void)
 {
-	omap_vram_reserve_sdram_memblock();
 	omap_dsp_reserve_sdram_memblock();
 	omap_secure_ram_reserve_memblock();
 	omap_barrier_reserve_memblock();

arch/arm/plat-omap/fb.c

@@ -29,6 +29,7 @@
 #include <linux/memblock.h>
 #include <linux/io.h>
 #include <linux/omapfb.h>
+#include <linux/dma-mapping.h>
 
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
@@ -106,7 +107,7 @@ static struct platform_device omap_fb_device = {
 	.id		= -1,
 	.dev = {
 		.dma_mask		= &omap_fb_dma_mask,
-		.coherent_dma_mask	= ~(u32)0,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
 		.platform_data		= &omapfb_config,
 	},
 	.num_resources = 0,
@@ -142,7 +143,7 @@ static struct platform_device omap_fb_device = {
 	.id		= -1,
 	.dev = {
 		.dma_mask		= &omap_fb_dma_mask,
-		.coherent_dma_mask	= ~(u32)0,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
 		.platform_data		= &omapfb_config,
 	},
 	.num_resources = 0,

arch/arm/plat-omap/include/plat/vram.h

-/*
- * VRAM manager for OMAP
- *
- * Copyright (C) 2009 Nokia Corporation
- * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#ifndef __OMAP_VRAM_H__
-#define __OMAP_VRAM_H__
-
-#include <linux/types.h>
-
-extern int omap_vram_add_region(unsigned long paddr, size_t size);
-extern int omap_vram_free(unsigned long paddr, size_t size);
-extern int omap_vram_alloc(size_t size, unsigned long *paddr);
-extern int omap_vram_reserve(unsigned long paddr, size_t size);
-extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram,
-		unsigned long *largest_free_block);
-
-#ifdef CONFIG_OMAP2_VRAM
-extern void omap_vram_set_sdram_vram(u32 size, u32 start);
-
-extern void omap_vram_reserve_sdram_memblock(void);
-#else
-static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { }
-
-static inline void omap_vram_reserve_sdram_memblock(void) { }
-#endif
-
-#endif

drivers/video/omap2/Kconfig

-config OMAP2_VRAM
-	bool
-
 config OMAP2_VRFB
 	bool
 

drivers/video/omap2/Makefile

-obj-$(CONFIG_OMAP2_VRAM) += vram.o
 obj-$(CONFIG_OMAP2_VRFB) += vrfb.o
 
 obj-$(CONFIG_OMAP2_DSS) += dss/

drivers/video/omap2/dss/Kconfig

@@ -5,18 +5,6 @@ menuconfig OMAP2_DSS
 
 if OMAP2_DSS
 
-config OMAP2_VRAM_SIZE
-	int "VRAM size (MB)"
-	range 0 32
-	default 0
-	help
-	  The amount of SDRAM to reserve at boot time for video RAM use.
-	  This VRAM will be used by omapfb and other drivers that need
-	  large continuous RAM area for video use.
-
-	  You can also set this with "vram=<bytes>" kernel argument, or
-	  in the board file.
-
 config OMAP2_DSS_DEBUG
 	bool "Debug support"
 	default n

drivers/video/omap2/omapfb/Kconfig

@@ -2,7 +2,6 @@ menuconfig FB_OMAP2
         tristate "OMAP2+ frame buffer support"
         depends on FB && OMAP2_DSS && !DRM_OMAP
 
-	select OMAP2_VRAM
 	select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3
         select FB_CFB_FILLRECT
         select FB_CFB_COPYAREA

drivers/video/omap2/omapfb/omapfb-ioctl.c

@@ -31,7 +31,6 @@
 
 #include <video/omapdss.h>
 #include <video/omapvrfb.h>
-#include <plat/vram.h>
 
 #include "omapfb.h"
 
@@ -853,14 +852,15 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
 		break;
 
 	case OMAPFB_GET_VRAM_INFO: {
-		unsigned long vram, free, largest;
-
 		DBG("ioctl GET_VRAM_INFO\n");
 
-		omap_vram_get_info(&vram, &free, &largest);
-		p.vram_info.total = vram;
-		p.vram_info.free = free;
-		p.vram_info.largest_free_block = largest;
+		/*
+		 * We don't have the ability to get this vram info anymore.
+		 * Fill in something that should keep the applications working.
+		 */
+		p.vram_info.total = SZ_1M * 64;
+		p.vram_info.free = SZ_1M * 64;
+		p.vram_info.largest_free_block = SZ_1M * 64;
 
 		if (copy_to_user((void __user *)arg, &p.vram_info,
 					sizeof(p.vram_info)))

drivers/video/omap2/omapfb/omapfb-main.c

@@ -31,7 +31,6 @@
 #include <linux/omapfb.h>
 
 #include <video/omapdss.h>
-#include <plat/vram.h>
 #include <video/omapvrfb.h>
 
 #include "omapfb.h"
@@ -1333,24 +1332,25 @@ static void omapfb_free_fbmem(struct fb_info *fbi)
 
 	rg = ofbi->region;
 
-	WARN_ON(atomic_read(&rg->map_count));
-
-	if (rg->paddr)
-		if (omap_vram_free(rg->paddr, rg->size))
-			dev_err(fbdev->dev, "VRAM FREE failed\n");
+	if (rg->token == NULL)
+		return;
 
-	if (rg->vaddr)
-		iounmap(rg->vaddr);
+	WARN_ON(atomic_read(&rg->map_count));
 
 	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
 		/* unmap the 0 angle rotation */
 		if (rg->vrfb.vaddr[0]) {
 			iounmap(rg->vrfb.vaddr[0]);
-			omap_vrfb_release_ctx(&rg->vrfb);
 			rg->vrfb.vaddr[0] = NULL;
 		}
+
+		omap_vrfb_release_ctx(&rg->vrfb);
 	}
 
+	dma_free_attrs(fbdev->dev, rg->size, rg->token, rg->dma_handle,
+			&rg->attrs);
+
+	rg->token = NULL;
 	rg->vaddr = NULL;
 	rg->paddr = 0;
 	rg->alloc = 0;
@@ -1385,7 +1385,9 @@ static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size,
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 	struct omapfb2_device *fbdev = ofbi->fbdev;
 	struct omapfb2_mem_region *rg;
-	void __iomem *vaddr;
+	void *token;
+	DEFINE_DMA_ATTRS(attrs);
+	dma_addr_t dma_handle;
 	int r;
 
 	rg = ofbi->region;
@@ -1400,42 +1402,43 @@ static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size,
 
 	size = PAGE_ALIGN(size);
 
-	if (!paddr) {
+	WARN_ONCE(paddr,
+		"reserving memory at predefined address not supported\n");
+
+	dma_set_attr(DMA_ATTR_WRITE_COMBINE, &attrs);
+
+	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
+		dma_set_attr(DMA_ATTR_NO_KERNEL_MAPPING, &attrs);
+
 	DBG("allocating %lu bytes for fb %d\n", size, ofbi->id);
-		r = omap_vram_alloc(size, &paddr);
-	} else {
-		DBG("reserving %lu bytes at %lx for fb %d\n", size, paddr,
-				ofbi->id);
-		r = omap_vram_reserve(paddr, size);
-	}
 
-	if (r) {
+	token = dma_alloc_attrs(fbdev->dev, size, &dma_handle,
+			GFP_KERNEL, &attrs);
+
+	if (token == NULL) {
 		dev_err(fbdev->dev, "failed to allocate framebuffer\n");
 		return -ENOMEM;
 	}
 
-	if (ofbi->rotation_type != OMAP_DSS_ROT_VRFB) {
-		vaddr = ioremap_wc(paddr, size);
+	DBG("allocated VRAM paddr %lx, vaddr %p\n",
+			(unsigned long)dma_handle, token);
 
-		if (!vaddr) {
-			dev_err(fbdev->dev, "failed to ioremap framebuffer\n");
-			omap_vram_free(paddr, size);
-			return -ENOMEM;
-		}
-
-		DBG("allocated VRAM paddr %lx, vaddr %p\n", paddr, vaddr);
-	} else {
+	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
 		r = omap_vrfb_request_ctx(&rg->vrfb);
 		if (r) {
+			dma_free_attrs(fbdev->dev, size, token, dma_handle,
+					&attrs);
 			dev_err(fbdev->dev, "vrfb create ctx failed\n");
 			return r;
 		}
-
-		vaddr = NULL;
 	}
 
-	rg->paddr = paddr;
-	rg->vaddr = vaddr;
+	rg->attrs = attrs;
+	rg->token = token;
+	rg->dma_handle = dma_handle;
+
+	rg->paddr = (unsigned long)dma_handle;
+	rg->vaddr = (void __iomem *)token;
 	rg->size = size;
 	rg->alloc = 1;
 

drivers/video/omap2/omapfb/omapfb.h

@@ -28,6 +28,8 @@
 #endif
 
 #include <linux/rwsem.h>
+#include <linux/dma-attrs.h>
+#include <linux/dma-mapping.h>
 
 #include <video/omapdss.h>
 
@@ -49,6 +51,9 @@ extern bool omapfb_debug;
 
 struct omapfb2_mem_region {
 	int             id;
+	struct dma_attrs attrs;
+	void		*token;
+	dma_addr_t	dma_handle;
 	u32		paddr;
 	void __iomem	*vaddr;
 	struct vrfb	vrfb;